In this work, sesamin and sesamolin is separated and purified by SMB (simulated moving bed) chromatography. Purity of sesamin and sesamolin can reach 99.2% and 99.9 %, and they can be recovered by 99.9% and 99.4%, r...In this work, sesamin and sesamolin is separated and purified by SMB (simulated moving bed) chromatography. Purity of sesamin and sesamolin can reach 99.2% and 99.9 %, and they can be recovered by 99.9% and 99.4%, respectively. Concentrations of the extract and raffinate was monitored and periodical change of the concentration was observed on experiment. Effects of non-linear adsorption, dead volume, and temperature on the separation are reviewed by the triangle theory to explain the periodical change of concentration. It is found that dead volume has little effect, and temperature fluctuation significantly affects thc separation by SMB. The temperature seriously affects the robust operation of SMB due to the change of Henry's constant, which will change the selectivity and restrain the productivity. Although the productivity in this study is only 0.0416 g/L-hr, the cost of the stationary phase used in this study is much lower than that of packed in analytical column. By using this stationary phase, the authors are still able to separate the mixture of sesamin and sesmolin. This will economically attract attention for the application of SMB to purify bioactive compounds on developing botanical drugs.展开更多
This paper presents an experimental study on the radial and axial profiles of local particle velocity of flu-idized catalyst(FCC)particles in a circulating fluidized bed of 8000mm in height and 186mm in inside diamete...This paper presents an experimental study on the radial and axial profiles of local particle velocity of flu-idized catalyst(FCC)particles in a circulating fluidized bed of 8000mm in height and 186mm in inside diameterwith a Fiber-Optic Probe Laser Doppler Velocimetry.It has been found that the radial profiles of local particlevelocity are parabolic,even in the centre region and steep in the region near the bed wall,and that the length ofparticle acceleration along the bed height is longer than expected.The following formula has been recommended to correlate the 1 ocal particle velocity with dilute gas-solidflow in the bed:where a,b,c and e are functions of radial positions.展开更多
Radial profiles of solid concentration and velocity for concurrent downward gas-solid suspension in a140mm inside diameter fast fluidized bed were investigated.The influence of gas velocity,solid circulating rateand a...Radial profiles of solid concentration and velocity for concurrent downward gas-solid suspension in a140mm inside diameter fast fluidized bed were investigated.The influence of gas velocity,solid circulating rateand axial position on radial profiles of solid concentration and particle velocity has been examined.It hasbeen found that an annular region of high solid concentration exists at r/R=0.94.At both the center and wallregion,the solid concentration and the particle velocities are relatively low.The shape of radial solid con-centration profile curves is mainly dependent on the cross-section averaged voidage,and the shape of radialparticle velocity profile is mainly affected by the gas velocity and cross-section averaged voidage.Based on the radial profiles of solid concentration and particle velocity,the solid mass flux profile and thenonuniformity of solids flow are discussed in this paper.It is shown that solids flow in CDFFB is much moreuniform than that in UFFB.展开更多
Mass transfer in a flat plate membrane oxygenator was studied and a convective mass transfer modelfor instantaeous reversible oxygenation of Cassonian fluid was presented. Numerical solution of the model canbe obtaine...Mass transfer in a flat plate membrane oxygenator was studied and a convective mass transfer modelfor instantaeous reversible oxygenation of Cassonian fluid was presented. Numerical solution of the model canbe obtained with finite difference method. When展开更多
Dense phase voidage can be estimated by cutting gas flow and following the rate of bed collapse. Abrupt cessation of flow is not possible when excess gas in the windbox can only discharge through the bed. The magnitud...Dense phase voidage can be estimated by cutting gas flow and following the rate of bed collapse. Abrupt cessation of flow is not possible when excess gas in the windbox can only discharge through the bed. The magnitude of this problem is examined experimentally.展开更多
Mathematical model is developed to estimate hemoglobin release under hypotonic conditions at microscopic level. The phenomenon of hemoglobin (Hb) release depends on: 1) the dynamics of repeated opening of hemolytic ho...Mathematical model is developed to estimate hemoglobin release under hypotonic conditions at microscopic level. The phenomenon of hemoglobin (Hb) release depends on: 1) the dynamics of repeated opening of hemolytic holes and 2) the radial fluctuations of lipid membrane. Both processes are sensitive to the rate of ionic strength decrease within the surrounding medium. Influence of the rate of ionic strength decrease on hemoglobin release is quantified by the model parameters: 1) the specific decrease of erythrocyte radius and 2) the specific decrease of hole radius during single opening time period of hemolytic hole. The prediction of released amount of Hb influenced by the conductive mechanism is equal to 2.9 %. The prediction of total released amount of Hb influenced by the conductive and convective mechanisms is approximately equal to 4 % of the initial amount of Hb within erythrocyte.展开更多
New model compound 1H, 1' H-Bis (benz-△ ̄4-imidazoline) 2,2'-spiro-titanium dichloride was prepared and the structure of the compound was determined by 1R, us and elementary analysis.
Bib(β--alkoxycarbonylalkyl)tin dichlorides were interfacial condensed with organic dithio--alcohols to give a series of new organo--tin polymers. Experimental parameters were discussed. The polymers synthesized were ...Bib(β--alkoxycarbonylalkyl)tin dichlorides were interfacial condensed with organic dithio--alcohols to give a series of new organo--tin polymers. Experimental parameters were discussed. The polymers synthesized were tested for their effect on the heat--stabilization of PVC resins. The results are of interest in this area of application展开更多
Kinetics of the steam reformig of n-butane,n-hexane,n-heptane,n-nonane and i-octane on Z409 catalystwere studied at atmospheric pressure by using an internal recycle gradientless reactor.The reaction temperaturewas va...Kinetics of the steam reformig of n-butane,n-hexane,n-heptane,n-nonane and i-octane on Z409 catalystwere studied at atmospheric pressure by using an internal recycle gradientless reactor.The reaction temperaturewas varied in the range of 743-853K,the steam carbon molar ratio 3-5.The experimental results showed thatthe reforming products contained no hydrocarbon other than methane.In addition,the product distributionof different n-paraffins were similar,but the product distribution of i-octane was different from that of n-paraffins.A reaction scheme for the steam reforming of paraffin has been proposed and the hyperbolic type rateequations were derived.It is clear that the obtained kinetic model could simulate the experimental results ofi-octane as well as different n-paraffins satisfactorily.展开更多
The behaviour of water soluble and monomer soluble inhibitors in the emulsion polymerization for CaseI system(e.g.vinyl acetate and vinyl chloride)has been studied.The behaviour of monomer soluble inhibitorsis shown t...The behaviour of water soluble and monomer soluble inhibitors in the emulsion polymerization for CaseI system(e.g.vinyl acetate and vinyl chloride)has been studied.The behaviour of monomer soluble inhibitorsis shown to be quite different from that observed in Case Ⅱ emulsion polymerization system.Model predictionsof the effect of these inhibitors on polymer particle nucleation and growth rate are shown to be in satisfactoryagreement with experimental results.展开更多
文摘In this work, sesamin and sesamolin is separated and purified by SMB (simulated moving bed) chromatography. Purity of sesamin and sesamolin can reach 99.2% and 99.9 %, and they can be recovered by 99.9% and 99.4%, respectively. Concentrations of the extract and raffinate was monitored and periodical change of the concentration was observed on experiment. Effects of non-linear adsorption, dead volume, and temperature on the separation are reviewed by the triangle theory to explain the periodical change of concentration. It is found that dead volume has little effect, and temperature fluctuation significantly affects thc separation by SMB. The temperature seriously affects the robust operation of SMB due to the change of Henry's constant, which will change the selectivity and restrain the productivity. Although the productivity in this study is only 0.0416 g/L-hr, the cost of the stationary phase used in this study is much lower than that of packed in analytical column. By using this stationary phase, the authors are still able to separate the mixture of sesamin and sesmolin. This will economically attract attention for the application of SMB to purify bioactive compounds on developing botanical drugs.
基金This paper was supported by NNSFThis paper was supported by SINOPEK
文摘This paper presents an experimental study on the radial and axial profiles of local particle velocity of flu-idized catalyst(FCC)particles in a circulating fluidized bed of 8000mm in height and 186mm in inside diameterwith a Fiber-Optic Probe Laser Doppler Velocimetry.It has been found that the radial profiles of local particlevelocity are parabolic,even in the centre region and steep in the region near the bed wall,and that the length ofparticle acceleration along the bed height is longer than expected.The following formula has been recommended to correlate the 1 ocal particle velocity with dilute gas-solidflow in the bed:where a,b,c and e are functions of radial positions.
文摘Radial profiles of solid concentration and velocity for concurrent downward gas-solid suspension in a140mm inside diameter fast fluidized bed were investigated.The influence of gas velocity,solid circulating rateand axial position on radial profiles of solid concentration and particle velocity has been examined.It hasbeen found that an annular region of high solid concentration exists at r/R=0.94.At both the center and wallregion,the solid concentration and the particle velocities are relatively low.The shape of radial solid con-centration profile curves is mainly dependent on the cross-section averaged voidage,and the shape of radialparticle velocity profile is mainly affected by the gas velocity and cross-section averaged voidage.Based on the radial profiles of solid concentration and particle velocity,the solid mass flux profile and thenonuniformity of solids flow are discussed in this paper.It is shown that solids flow in CDFFB is much moreuniform than that in UFFB.
基金The paper was presented in the lst National Rheology Conference of China and was supported by NatiOnal Natural Science Foundation of China.
文摘Mass transfer in a flat plate membrane oxygenator was studied and a convective mass transfer modelfor instantaeous reversible oxygenation of Cassonian fluid was presented. Numerical solution of the model canbe obtained with finite difference method. When
文摘Dense phase voidage can be estimated by cutting gas flow and following the rate of bed collapse. Abrupt cessation of flow is not possible when excess gas in the windbox can only discharge through the bed. The magnitude of this problem is examined experimentally.
文摘Mathematical model is developed to estimate hemoglobin release under hypotonic conditions at microscopic level. The phenomenon of hemoglobin (Hb) release depends on: 1) the dynamics of repeated opening of hemolytic holes and 2) the radial fluctuations of lipid membrane. Both processes are sensitive to the rate of ionic strength decrease within the surrounding medium. Influence of the rate of ionic strength decrease on hemoglobin release is quantified by the model parameters: 1) the specific decrease of erythrocyte radius and 2) the specific decrease of hole radius during single opening time period of hemolytic hole. The prediction of released amount of Hb influenced by the conductive mechanism is equal to 2.9 %. The prediction of total released amount of Hb influenced by the conductive and convective mechanisms is approximately equal to 4 % of the initial amount of Hb within erythrocyte.
文摘New model compound 1H, 1' H-Bis (benz-△ ̄4-imidazoline) 2,2'-spiro-titanium dichloride was prepared and the structure of the compound was determined by 1R, us and elementary analysis.
文摘Bib(β--alkoxycarbonylalkyl)tin dichlorides were interfacial condensed with organic dithio--alcohols to give a series of new organo--tin polymers. Experimental parameters were discussed. The polymers synthesized were tested for their effect on the heat--stabilization of PVC resins. The results are of interest in this area of application
文摘Kinetics of the steam reformig of n-butane,n-hexane,n-heptane,n-nonane and i-octane on Z409 catalystwere studied at atmospheric pressure by using an internal recycle gradientless reactor.The reaction temperaturewas varied in the range of 743-853K,the steam carbon molar ratio 3-5.The experimental results showed thatthe reforming products contained no hydrocarbon other than methane.In addition,the product distributionof different n-paraffins were similar,but the product distribution of i-octane was different from that of n-paraffins.A reaction scheme for the steam reforming of paraffin has been proposed and the hyperbolic type rateequations were derived.It is clear that the obtained kinetic model could simulate the experimental results ofi-octane as well as different n-paraffins satisfactorily.
文摘The behaviour of water soluble and monomer soluble inhibitors in the emulsion polymerization for CaseI system(e.g.vinyl acetate and vinyl chloride)has been studied.The behaviour of monomer soluble inhibitorsis shown to be quite different from that observed in Case Ⅱ emulsion polymerization system.Model predictionsof the effect of these inhibitors on polymer particle nucleation and growth rate are shown to be in satisfactoryagreement with experimental results.