In order to increase the efficiency and decrease the cost of machinerydiagnosis, a hybrid system of computational intelligence methods is presented. Firstly, thecontinuous attributes in diagnosis decision system are d...In order to increase the efficiency and decrease the cost of machinerydiagnosis, a hybrid system of computational intelligence methods is presented. Firstly, thecontinuous attributes in diagnosis decision system are discretized with the self-organizing map(SOM) neural network. Then, dynamic reducts are computed based on rough set method, and the keyconditions for diagnosis are found according to the maximum cluster ratio. Lastly, according to theoptimal reduct, the adaptive neuro-fuzzy inference system (ANFIS) is designed for faultidentification. The diagnosis of a diesel verifies the feasibility of engineering applications.展开更多
An on line self-testing for Coriolis vibratory gyroscopes (CVGs) is realized according to a digital readout electronics for capacitive sensors and micro-machined angular rate sensors. By applying some additional signa...An on line self-testing for Coriolis vibratory gyroscopes (CVGs) is realized according to a digital readout electronics for capacitive sensors and micro-machined angular rate sensors. By applying some additional signals to the micro machined structure, the actual noise performance (<0.1°/s) is not worsened. The running of the primary and the secondary oscillators of CVGs is verified by self-testing. Compared with other methods, the device needs not to check the functionality. In this new approach the on-line testing is conducted at any time without disturbing the normal operational mode. Based on the approach the performance of the micro machined gyroscope can be improved and a secure availability of the functionality of the micro-machined angular rate sensor is guaranteed. Furthermore, the error signal is generated when the sensor works incorrectly.展开更多
The appropriate bireflectance film series are selected to get thebeat-frequency of dual-frequency laser using anisotropic bireflectance film (DLABF) from 1.2 MHz to6 MHz. The maximum measurement velocity of the interf...The appropriate bireflectance film series are selected to get thebeat-frequency of dual-frequency laser using anisotropic bireflectance film (DLABF) from 1.2 MHz to6 MHz. The maximum measurement velocity of the interferometer utilizing DLABF can be up to 1.8 m/s.Generally the outputs of the DLABF in a transverse magnetic field are two orthogonalmicro-elliptical polarized components when DLABF can emit dual-frequency laser. When the laser tubeis spun in the magnetic field, the ellipticities of these two components are also changed. In somecertain relative angles, the outputs the DLABF are two almost ideally orthogonal linear polarizedcomponents. The frequency stabilization of DLABF is also discussed. The maximum variation of thebeat-frequency of the stabilized DLABF can be 0.15 kHz within 46 h. As no quarter wave plate (QWP)needed, DLABFs have better thermal stability than longitudinal Zeeman lasers.展开更多
An enhanced system architecture of Web-based product structure and configuration management system along with its, functions are is presented. The key techniques, such as construction of object models of product str...An enhanced system architecture of Web-based product structure and configuration management system along with its, functions are is presented. The key techniques, such as construction of object models of product structure and product configuration, hybrid approach method in product configuration management, sharing and integration of heterogeneous product data, integration with other sub-systems, are discussed too. A prototype system is developed by J2EE technology.展开更多
This paper mainly introduces an output control method with high stable precision of a large power IGBT arc welding inverter. Experiments indicate that this kind of control mode can effectively improve the static and d...This paper mainly introduces an output control method with high stable precision of a large power IGBT arc welding inverter. Experiments indicate that this kind of control mode can effectively improve the static and dynamic characteristics and stability of power supply system. And it can decrease the spatters in the welding process apparently. This power supply is especially suitable to automatic robot welding assembly line. It will be the developing direction of robot welding supply in the future.展开更多
Concerning the demands in networked collaborative innovative design, a knowledge-based collaborative design model is introduced the model of knowledge integration along with its relevant supporting techniques ...Concerning the demands in networked collaborative innovative design, a knowledge-based collaborative design model is introduced the model of knowledge integration along with its relevant supporting techniques are presented. After illustrating the general knowledge search paradigm, a kind of dynamic user model is proposed to improve knowledge search efficiency. At last a short introduction of the system’s implementation is described.展开更多
The characteristics of magnetorheological fin- ishing (MRF) technique such as the behavior of magnetic particles and the magnetic field distribution have been inves- tigated. Based on the established theoretical model...The characteristics of magnetorheological fin- ishing (MRF) technique such as the behavior of magnetic particles and the magnetic field distribution have been inves- tigated. Based on the established theoretical model, material removal function and removal rate experiments involving a K9 glass mirror are designed and carried out. Further experiments are carried out to improve the surface roughness of the workpiece. The final surface roughness with an initial value of 17.58 nm reached 0.4351 nm rms after 35 min of deterministic MRF, and the AFM measurements on microstructures of the polished surface are also improved by 0.445 nm rms without obvious defects.展开更多
Mechanochemical Modification (MCM) of nanodiamond surface with DN-10 was studied in relation to the performance of nanodiamond in polishing quartz wafers. Results show that the modified nanodiamond is more stable in t...Mechanochemical Modification (MCM) of nanodiamond surface with DN-10 was studied in relation to the performance of nanodiamond in polishing quartz wafers. Results show that the modified nanodiamond is more stable in the pH range 8~11. A super smooth surface with an average roughness of 0.214 nm was achieved using a nanodia-mond-based slurry regulated by N-(2-hydroxyethyl)ethylenediamine. It is suggested that the principal ultra-fine polishing mechanism of quartz wafer involves atom-level removal under the synergism of chemical and mechanical actions.展开更多
文摘In order to increase the efficiency and decrease the cost of machinerydiagnosis, a hybrid system of computational intelligence methods is presented. Firstly, thecontinuous attributes in diagnosis decision system are discretized with the self-organizing map(SOM) neural network. Then, dynamic reducts are computed based on rough set method, and the keyconditions for diagnosis are found according to the maximum cluster ratio. Lastly, according to theoptimal reduct, the adaptive neuro-fuzzy inference system (ANFIS) is designed for faultidentification. The diagnosis of a diesel verifies the feasibility of engineering applications.
文摘An on line self-testing for Coriolis vibratory gyroscopes (CVGs) is realized according to a digital readout electronics for capacitive sensors and micro-machined angular rate sensors. By applying some additional signals to the micro machined structure, the actual noise performance (<0.1°/s) is not worsened. The running of the primary and the secondary oscillators of CVGs is verified by self-testing. Compared with other methods, the device needs not to check the functionality. In this new approach the on-line testing is conducted at any time without disturbing the normal operational mode. Based on the approach the performance of the micro machined gyroscope can be improved and a secure availability of the functionality of the micro-machined angular rate sensor is guaranteed. Furthermore, the error signal is generated when the sensor works incorrectly.
基金This project is supported by National Natural Science Foundation of China (No.50027002).
文摘The appropriate bireflectance film series are selected to get thebeat-frequency of dual-frequency laser using anisotropic bireflectance film (DLABF) from 1.2 MHz to6 MHz. The maximum measurement velocity of the interferometer utilizing DLABF can be up to 1.8 m/s.Generally the outputs of the DLABF in a transverse magnetic field are two orthogonalmicro-elliptical polarized components when DLABF can emit dual-frequency laser. When the laser tubeis spun in the magnetic field, the ellipticities of these two components are also changed. In somecertain relative angles, the outputs the DLABF are two almost ideally orthogonal linear polarizedcomponents. The frequency stabilization of DLABF is also discussed. The maximum variation of thebeat-frequency of the stabilized DLABF can be 0.15 kHz within 46 h. As no quarter wave plate (QWP)needed, DLABFs have better thermal stability than longitudinal Zeeman lasers.
基金Supported by the National High-Tech. R&D Program for CIMS China (Grant No. 2001AA412180)
文摘An enhanced system architecture of Web-based product structure and configuration management system along with its, functions are is presented. The key techniques, such as construction of object models of product structure and product configuration, hybrid approach method in product configuration management, sharing and integration of heterogeneous product data, integration with other sub-systems, are discussed too. A prototype system is developed by J2EE technology.
文摘This paper mainly introduces an output control method with high stable precision of a large power IGBT arc welding inverter. Experiments indicate that this kind of control mode can effectively improve the static and dynamic characteristics and stability of power supply system. And it can decrease the spatters in the welding process apparently. This power supply is especially suitable to automatic robot welding assembly line. It will be the developing direction of robot welding supply in the future.
基金SupportedbyNationalHi-Tech Research and Development Program of China (Grants No.2001AA412180)
文摘Concerning the demands in networked collaborative innovative design, a knowledge-based collaborative design model is introduced the model of knowledge integration along with its relevant supporting techniques are presented. After illustrating the general knowledge search paradigm, a kind of dynamic user model is proposed to improve knowledge search efficiency. At last a short introduction of the system’s implementation is described.
基金This work was supported by the National Natural Science Foundation of China(Grant No.50175062).
文摘The characteristics of magnetorheological fin- ishing (MRF) technique such as the behavior of magnetic particles and the magnetic field distribution have been inves- tigated. Based on the established theoretical model, material removal function and removal rate experiments involving a K9 glass mirror are designed and carried out. Further experiments are carried out to improve the surface roughness of the workpiece. The final surface roughness with an initial value of 17.58 nm reached 0.4351 nm rms after 35 min of deterministic MRF, and the AFM measurements on microstructures of the polished surface are also improved by 0.445 nm rms without obvious defects.
文摘Mechanochemical Modification (MCM) of nanodiamond surface with DN-10 was studied in relation to the performance of nanodiamond in polishing quartz wafers. Results show that the modified nanodiamond is more stable in the pH range 8~11. A super smooth surface with an average roughness of 0.214 nm was achieved using a nanodia-mond-based slurry regulated by N-(2-hydroxyethyl)ethylenediamine. It is suggested that the principal ultra-fine polishing mechanism of quartz wafer involves atom-level removal under the synergism of chemical and mechanical actions.
