Despite numerous research investigations to understand the influences of various structural parameters,to the authors'knowledge,no research has been the effect of different angles of incidence on stab response and...Despite numerous research investigations to understand the influences of various structural parameters,to the authors'knowledge,no research has been the effect of different angles of incidence on stab response and performance of different types of protective textiles.Three distinct structures of 3D woven textiles and 2D plain weave fabric made with similar high-performance fiber and areal density were designed and manufactured to be tested.Two samples,one composed of a single and the other of 4-panel layers,from each fabric type structure,were prepared,and tested against stabbing at[0○],[22.5○],and[45○]angle of incidence.A new stabbing experimental setup that entertained testing of the specimens at various angles of incidence was engineered and utilized.The stabbing bench is also equipped with magnetic sensors and a UK Home Office Scientific Development Branch(HOSDB)/P1/B sharpness engineered knives to measure the impact velocity and exerted impact energy respectively.A silicon compound was utilized to imprint the Back Face Signature(BFS)on the backing material after every specimen test.Each silicon print was then scanned,digitized,and precisely measured to evaluate the stab response and performance of the specimen based on different performance variables,including Depth of Trauma(DOT),Depth of Penetration(DOP),and Length of Penetration(LOP).Besides,the post-impact surface failure modes of the fabrics were also measured using Image software and analyzed at the microscale level.The results show stab angle of incidence greatly influences the stab response and performance of protective textiles.The outcome of the study could provide not only valuable insights into understanding the stab response and capabilities of protective textiles under different angle of incidence,but also provide valuable information for protective textile manufacturer,armor developer and stab testing and standardizing organizations to consider the angle of incidence while developing,testing,optimizing,and using protective textiles in various applications.展开更多
Stab-resistant textiles play a critical role in personal protection,necessitating a deeper understanding of how structural and layering factors influence their performance.The current study experimentally examines the...Stab-resistant textiles play a critical role in personal protection,necessitating a deeper understanding of how structural and layering factors influence their performance.The current study experimentally examines the effects of textile structure,layering,and ply orientation on the stab resistance of multi-layer textiles.Three 3D warp interlock(3DWI)structures({f1},{f2},{f3})and a 2D woven fabric({f4}),all made of high-performance p-aramid yarns,were engineered and manufactured.Multi-layer specimens were prepared and subjected to drop-weight stabbing tests following HOSBD standards.Stabbing performance metrics,including Depth of Trauma(DoT),Depth of Penetration(DoP),and trauma deformation(Ymax,Xmax),were investigated and analyzed.Statistical analyses(Two-and One-Way ANOVA)indicated that fabric type and layer number significantly impacted DoP(P<0.05),while ply orientation significantly affected DoP(P<0.05)but not DoT(P>0.05).Further detailed analysis revealed that 2D woven fabrics exhibited greater trauma deformation than 3D WIF structures.Increasing the number of layers reduced both DoP and DoT across all fabric structures,with f3 demonstrating the best performance in multi-layer configurations.Aligned ply orientations also enhanced stab resistance,underscoring the importance of alignment in dissipating impact energy.展开更多
Electrospinning has gained significant importance across various fields,including biomedicine,filtration,and packaging due to the control it provides over the properties of the resulting materials,such as fiber diamet...Electrospinning has gained significant importance across various fields,including biomedicine,filtration,and packaging due to the control it provides over the properties of the resulting materials,such as fiber diameter and membrane thickness.Chitosan is a biopolymer that can be utilized with both natural and synthetic copolymers,owing to its therapeutic potential,biocompatibility,and biodegradability.However,producing electrospun chitosan is challenging due to its high solution viscosity,which often results in the formation of beads instead of uniform fibers.To address this issue,the spinnability of chitosan is significantly enhanced,and the production of continuous nanofibers is facilitated by combining it with polymers such as polyethylene oxide(PEO)in suitable ratios.These chitosan–PEO nanofibers are primarily used in biomedical applications,including wound healing,drug delivery systems,and tissue engineering scaffolds.Additionally,they have shown promise in water treatment,filtration membranes,and packaging.Among all the nanofiber mats,chitosan/PEO-AC had the smallest fiber diameter(83±12.5 nm),chitosan/PEO_45S5 had the highest tensile strength(1611±678 MPa).This comprehensive review highlights recent advancements,ongoing challenges,and future directions in the electrospinning of chitosan-based fibers assisted by PEO.展开更多
To enhance the hydrophilicity and antistatic properties of the polyethylene terephthalate(PET)fabric,the lawsone dye was employed in dyeing the PET fabric.It was dissolved in ethanol/deionized water mixture and deioni...To enhance the hydrophilicity and antistatic properties of the polyethylene terephthalate(PET)fabric,the lawsone dye was employed in dyeing the PET fabric.It was dissolved in ethanol/deionized water mixture and deionized water separately,forming different lawsone dye solutions(LDSs).The study investigated how the compounds in the LDS improve the surface properties and color durability of the PET fabric,resulting in increased dye uptake.An infrared dyeing machine was utilized to expedite the reactions between the lawsone dye and the PET fabric.Additionally,the chemical composition of the dyed PET fabric was verified using techniques such as Fourier transform infrared(FTIR)spectroscopy,X-ray photoelectron spectroscopy(XPS),X-ray diffraction(XRD)and ultraviolet-visible(UV-Vis)spectrophotometry.The K/S value was measured to assess color durability.After dyeing,the PET fabric exhibited high hydrophilicity which improved the hygroscopicity of the PET fabric and thus the conductivity of the PET fabric surface increased,thereby providing an antistatic effect.展开更多
Global warming is making plants more susceptible to heat stress.Hence,adjustments to crop production systems are required for global food security.Heat stress(HS)poses a threat to the quality of ecosystems and global ...Global warming is making plants more susceptible to heat stress.Hence,adjustments to crop production systems are required for global food security.Heat stress(HS)poses a threat to the quality of ecosystems and global food security due to its adverse effects on plant development.The degree to which HS affects physiological disruptions,physical harm,and biochemical changes at various growth stages directly correlates with its effects on physiological functions,plant growth,and crop production.One promising approach is soil modification using biochar,which enhances soil health and promotes the development of microbial communities,ultimately improving plant heat tolerance.Biochar enhances soil structure,improves moisture retention,and increases nutrient availability in hot weather,thereby promoting plant growth and enhancing crop yields.Additionally,biochar,with its porous structure and ability to provide a liming effect,increases the diversity and activity of soil microbes,thereby fostering advantageous symbiotic relationships.These microbial communities support nutrient cycling,root growth,and general soil health,strengthening biochar’s position as a long-term solution for climate-resilient farming.Earlier research concentrated on the connection between biochar and heat stress or microbial populations;however,this review uniquely combines all three elements,providing a fresh viewpoint on their interrelated functions in enhancing plant adaptability.Furthermore,this study demonstrates the potential of biochar as a sustainable component for improving soil and supporting crops that adapt to heat stress.It examines the processes underlying these interactions and provides recommendations for future research strategies.展开更多
This paper reports the effects of fiber breakage defects and waviness defects on the compressive fatigue behavior and the progressive damage evolution process of 3D Multiaxial Braided Composites (3DMBCs). Combined wit...This paper reports the effects of fiber breakage defects and waviness defects on the compressive fatigue behavior and the progressive damage evolution process of 3D Multiaxial Braided Composites (3DMBCs). Combined with finite element compression simulation and ultra-depth microscope, the internal defect content of composites with different braiding angles was determined. The results demonstrate that the weakening effect of waviness and fiber breakage defects is greater than the strengthening effect of the braiding angle. This causes the fatigue resistance of 3DMBCs with the 31° braiding angle being better in both directions of 0° and 90°. The increase of 4° waviness and 10% fiber breakage defect results in the average fatigue life of composites being shortened by 48% and the energy consumption rate increased by 10% at 85% stress level in 90° compression direction. The alteration in loading direction modifies the included angle corresponding to the stress component. The stress component parallel to the fiber direction under compressive fatigue load leads to interfacial debonding in the composites, whereas the stress component perpendicular to the fiber direction results in pronounced shear failure.展开更多
Wearable electronic textiles(e-textiles)with embedded electronics offer promising solutions for unobtrusive,real-time health monitoring,enhancing healthcare efficiency.However,their adoption is limited by performance ...Wearable electronic textiles(e-textiles)with embedded electronics offer promising solutions for unobtrusive,real-time health monitoring,enhancing healthcare efficiency.However,their adoption is limited by performance and sustainability challenges in materials,manufacturing,and recycling.This study introduces a sustainable paradigm for the fabrication of fully inkjet-printed Smart,Wearable,and Eco-friendly Electronic Textiles(SWEET)with the first comprehensive assessments of the biodegradability and life cycle assessment(LCA).SWEET addresses existing limitations,enabling concurrent and continuous monitoring of human physiology,including skin surface temperature(at temperature coefficient of resistance,TCR value of~-4.4%℃^(-1))and heart rate(-74 beats per minute,bpm)separately and simultaneously like the industry gold standard,using consistent,versatile,and highly efficient inkjet-printed graphene and Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)-based wearable e-textiles.Demonstrations with a wearable garment on five human participants confirm the system’s capability to monitor their electrocardiogram(ECG)signals and skin temperature.Such sustainable and biodegradable e-textiles decompose by-48%in weight and lost-98%strength over 4months.Life cycle assessment(LCA)reveals that the graphene-based electrode has the lowest climate change impact of-0.037 kg CO_(2) eq,40 times lower than reference electrodes.This approach addresses material and manufacturing challenges,while aligning with environmental responsibility,marking a significant leap forward in sustainable e-textile technology for personalized healthcare management.展开更多
In this paper, the knot strengths of the seven strands which were made of polyethleneterephthalate(PET), nylon 6, polyvinyl formal fibre, polypropylene and polyethylene with differentspecification used for industrial ...In this paper, the knot strengths of the seven strands which were made of polyethleneterephthalate(PET), nylon 6, polyvinyl formal fibre, polypropylene and polyethylene with differentspecification used for industrial purposes were tested and discussed. The results of experimentshow: the knot strength loss does not only depend on the breaking elongation and the diameter ofsample, but also on the shape of the load-extension curve and twist factor of sample and other fac-tors; the range of the knot strength loss and the breaking energy loss vary in a wide range, in thepresent case. the former is from 2.7% to 58.14% and the latter from 16.36% to 78.76%. Thestrength loss of the polypropylene filament is the least among the samples investigated.展开更多
In this study, jute woven fabrics (1 × 1 plain, twill, zigzag and diamond weave) were manufactured from 100% raw jute yarn. The fabric specimens were treated by 5%, 10%, 15%, 20% and 25% unsaturated polyester res...In this study, jute woven fabrics (1 × 1 plain, twill, zigzag and diamond weave) were manufactured from 100% raw jute yarn. The fabric specimens were treated by 5%, 10%, 15%, 20% and 25% unsaturated polyester resin where styrene monomer used as a solvent and 1% methyl ethyl ketone peroxide (MEKP) was used as initiator. Two bar pressure was applied for complete wetting of the fabric by a Padder and curing was done at 130?C for 10 minutes. The physico-mechanical characteristics of untreated and treated samples were examined and evaluated. It was revealed that moisture content (MC) and water absorbency of the treated specimens were decreased with the increase of resin percentage (%) in the fabrics. MC and water absorbency were maximum decreased up to 50.23% and 60.14% respectively by 25% resin treatment. On the other hand, bending length (BL), flexural rigidity (FR), flexural modulus (FM) and tensile strength (TS) were enhanced with the increase of resin percentage in the fabrics which resulted higher fabric stiffness. The maximum improvement of BL, FR, FM and TS were found to be 6.67%, 56.04%, 10.57% and 18.75% respectively in comparison to untreated sample. Soil degradation tests exhibited that 33.59% TS loss occurred for untreated specimens where only 8.04% loss of TS found for 25% resin treated one. Furthermore, jute based twill, zigzag and diamond fabrics were also treated by 10%, 15%, 20% and 25% resin, then measured their TS and compared with plain fabrics. It was revealed that plain fabrics have superior TS over other fabrics. It was also evident that TS enhanced for all the fabrics after resin treatment and maximum increase found for all the fabrics up to 25% resin treatment.展开更多
Denim was produced in the city of Nîmes in France and was originally called the serge de Nîmes.The word denim is an English colloquialism of the French term:"denim."Day by day Bangladesh denim sect...Denim was produced in the city of Nîmes in France and was originally called the serge de Nîmes.The word denim is an English colloquialism of the French term:"denim."Day by day Bangladesh denim sector very much developed and helps to increase productivity.Bangladesh have seen a significant increase in investing in denim fabric manufacturing,increasing the country’s production performance by reducing fabric dependence on imports.It is important due to its aspects of durability,and not easily torn which benefited physical laborers much.The government also plays a vital role in denim textile industry.This paper shows different section of denim textile industry such as:sewing section,cutting section,washing,IE and finishing department.The main aim of this paper is how to role all the section of denim textile industry.Textile education is insufficient without industry attachment,which bridges the gap between theoretical and practical aspects and acclimates students to the industrial world.We can gain about theoretical development on an industrial level from this attachment.We can understand more about the machines used in various departments,their technical specifications,characteristics,operating system,and so on,and we believe that without this type of industrial connection,it is impossible to obtain industry-based information about textile engineering adequately.The Industrial Attachment on Denim Manufacturing Technology was used to organize this study(sewing section,cutting,IE,washing section,CAD Section,and finishing department.Various operating procedures for the production of denim in the industry are presented in this paper.The technique and process of several procedures and processes are presented here such as machine specifications,manpower,maintenance,layout of the different section,dye processes and wet processes.展开更多
Tissue engineering is nowadays an emerging approach that aims to replace or regenerate diseased or damaged organs with engineered constructs. Considering the key role of growth factors (GFs) in the tissue regeneration...Tissue engineering is nowadays an emerging approach that aims to replace or regenerate diseased or damaged organs with engineered constructs. Considering the key role of growth factors (GFs) in the tissue regeneration process, these biomolecules are considered an important part of the tissue engineering process, so the presence of growth factors in engineered scaffolds can accelerate tissue regeneration by influencing the behavior of cells. Platelet-rich plasma (PRP), as an autologous source of a variety of growth factors, is considered a therapeutic agent for the treatment of degenerative diseases. Regarding its ability to promote the healing process and tissue regeneration, PRP therapy has attracted great attention in bone and cartilage tissue engineering. Incorporating PRP and its derivatives into engineered scaffolds not only bioactivates the scaffold, but the scaffold matrix also acts as a sustained and localized growth factor release system. In addition, the presence of a scaffold can promote the bioactivity of GFs by providing an environment that facilitates their interaction, leading to enhanced effects compared to their free form. This review presents a brief overview of PRP's role in bone and cartilage tissue regeneration with the main focus on scaffold-mediated PRP delivery. In addition, the classification of platelet-rich products, current extraction techniques, terminology, and scaffold bioactivation methods are presented to provide a better understanding of the basics and the key aspects that may affect the effectiveness of therapy in bone and cartilage tissue engineering.展开更多
The main objective of this research work was the development of novel and responsive nonwoven composite structures containing gelling materials for wound management. The development of novel all inclusive collagen boo...The main objective of this research work was the development of novel and responsive nonwoven composite structures containing gelling materials for wound management. The development of novel all inclusive collagen booster(CB) therapeutic nonwoven wound dressings was mainly focused on. It provides essential functional properties such as high absorption,vertical and lateral wicking,and antibacterial and acidic pH properties. The developed composite wound dressing consisted of carboxymethylcellulose(CMC) fibre and also it was reinforced with polylactic acid( PLA) fibre. The produced composite wound dressings were treated with two different CBs at 4% by using the spray method. The details of the CBs have not been disclosed in this paper due to the Intellectual Property Rights( IPR) issues. The important benefit of using CB treatment is that it allows the maintenance of an acidic pH environment at the wound area. It is well known that acidic pH reduces the wound healing time and enhances the wound healing process. Furthermore,one of the CBs not only promotes the proliferation of the epithelial cells in wounds but also can provide antibacterial action. The PLA fibre reinforced CMC composite dressing has enhanced wicking properties which help to minimise the pooling of exudate on the wound bed and as a result maceration is prevented. The CBs treated dressings maintain the wound bed in an acidic pH condition which also improves the wound healing process. In addition to the above-mentioned properties,the CB treatment imparts antimicrobial activity against Gram-positive and Gram-negative bacteria,thus resulting in the reduction in the propensity for wound infection. Ultimately,the research has proved that the 4% CB treatment enhances the antimicrobial activity and the acidic pH characteristics of the developed CMC /PLA composite wound dressings.展开更多
In the world, there are more than 370 million indigenous and tribal people with especial culture and traditions. The Chakma’s is one of the groups of indigenous people dwelling Chittagong hill tracts in Bangladesh. C...In the world, there are more than 370 million indigenous and tribal people with especial culture and traditions. The Chakma’s is one of the groups of indigenous people dwelling Chittagong hill tracts in Bangladesh. Chakma’s has its own culture, tradition, literature, and costume designs. The design costumes of the Chakma’s play an essential role. The Chakma’s preserved their textile design in “Alam”. Alam is a kind of cloth embroidered with various designs carrying the heritage of the Chakma. The use of Alam began approximately 500 years ago. All used clothing in Chakma society is weaved manually in the back-strap loom, which is generally very time-consuming— this limits its design aesthetics and universal use. Because of globalisation, the use of the traditional design of Chakma’s are threatened today. Till today in our country and overseas, no attempts were taken for research of the traditional Chakma’s design. The purpose of this research is to upgrade and digitise Chakma’s designs. Furthermore, efforts were made for the automatization of the traditional process to preserve traditional Chakma’s designs. In this study analysis of the fabric designs, pattern structure, colour applications of the traditional Aalam design were constructed using small prototype Rapier loom technology. We found that most of the single designs of the Alam were possible to weave in small prototype modern loom. On the other hand, intricate designs were not possible to weave in small prototype loom but are possible in the jacquard loom. The key idea is to establish an approach to modernise the traditional weaving process in order to make it convenient, economical and less time-consuming.展开更多
The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables ...The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables of chemical coagulation method were type and amount of chemicals, pH and stirring rate. For electrocoagulation method, the variables were electrode materials, electric potential and contact time. It was found that the optimum condition of chemical coagulation method was 10% （w/w） of aqueous solution of aluminum sulphate 80 mL and 0.01% （w/w） of aqueous solution of coagulant aids, cationic polymer 32 mL per 4 L of wastewater at oH 8. The mixture solution was rapidly stirred with 120 rpm for 1 min and then slowly stirred with 20 rpm for 20 rain. The removal efficiency of turbidity, COD and oil content were 88.88%, 85.20% and 77.72%, respectively. For electrocoagulation method, the optimum condition was using aluminum electrode with 35 V and 150 min of contact time. The removal efficiency of turbidity, COD and oil content were 98.86%, 91.63% and 89.84%, respectively. It can be concluded from this study that the textile industrial wastewater treatment from water jet loom machine with electrocoagulation method is more efficient than that with chemical coagulation method.展开更多
Ultra violet radiation is detrimental to human skin and responsible for various skin diseases that is now worldwide growing concern for the people. Sun screen lotions, however, considered best possible solution but it...Ultra violet radiation is detrimental to human skin and responsible for various skin diseases that is now worldwide growing concern for the people. Sun screen lotions, however, considered best possible solution but its temporary attachment didn’t bring the real impact. The advancement of nano technology provides a number of techniques to introduce UV protected fabric by applying certain semi conductor metal oxide. So many researches have been carried out to coat the fabric using certain nano particles namely ZnO and TiO2 to improve the UV absorption capacity of material as well as increasing UPF value to protect the human skin which have been playing a significant role to provide UV protected clothing. This paper deals with the harmful impact of ultra violet radiation on human skin, UPF measurement method and UV protective finishing on textile material using nano ZnO and nano TiO2 particle.展开更多
The automobiles, aircraft, and lightweight industries continuously demand thin near-net-shape preforms just out-of-machine as close to the final shape. This study addresses the possibilities of 3D thin shell textile p...The automobiles, aircraft, and lightweight industries continuously demand thin near-net-shape preforms just out-of-machine as close to the final shape. This study addresses the possibilities of 3D thin shell textile preform as the solution of lightweight reinforcement in various applications. Investigation into the development of 3D thin shells has led to different manufacturing processes. However, 3D thin shell preforms are mostly made by weaving and knitting, but nonwoven, winding, and/or layup techniques have been reported for over a decade. Owing to the complex thin shell manufacturing processes, they are not similar to the conventional methods. The different 3D thin shell preforms can extend the opportunities for new applications in various technical fields. This study presents existing research gaps and a few potential issues to be solved regarding 3D thin shell preforms in the near future.展开更多
The automobiles, aircraft, and lightweight industries continuously demand thin near-net-shape preforms just out-of-machine as close to the final shape. This study addresses the possibilities of 3D thin shell textile p...The automobiles, aircraft, and lightweight industries continuously demand thin near-net-shape preforms just out-of-machine as close to the final shape. This study addresses the possibilities of 3D thin shell textile preform as the solution of lightweight reinforcement in various applications. Investigation into the development of 3D thin shells has led to different manufacturing processes. However, 3D thin shell preforms are mostly made by weaving and knitting, but nonwoven, winding, and/or layup techniques have been reported for over a decade. Owing to the complex thin shell manufacturing processes, they are not similar to the conventional methods. The different 3D thin shell preforms can extend the opportunities for new applications in various technical fields. This study presents existing research gaps and a few potential issues to be solved regarding 3D thin shell preforms in the near future.展开更多
The ecological and sustainable product is the demand of the present world. But it was not possible to produce an ecological and sustainable product for all sectors as the world requires now. The synthetic material is ...The ecological and sustainable product is the demand of the present world. But it was not possible to produce an ecological and sustainable product for all sectors as the world requires now. The synthetic material is used to produce flame retardant materials due to the unavailable sustainable ecological flame-retardant material. But different researchers are trying to produce sustainable ecological flame-retardant material. This research found that the Spinach leaves Juice, banana pseudostem sap (SAP) and eggshell powder have flame retardant properties. Different literature shows that the ash also has flame retardant properties. So researcher suggested developing the composite material from the above materials with cotton fibres. It may be more effective as fire-retardant composite materials.展开更多
Textile chemicals such as dyes, printing pigments, additives, oxidising agents and reducing agents can be very injurious to the body and the environment if not properly used. The prime focus of this study is to promot...Textile chemicals such as dyes, printing pigments, additives, oxidising agents and reducing agents can be very injurious to the body and the environment if not properly used. The prime focus of this study is to promote and maintain a safe and healthy environment by ensuring the highest level of environmental health and safety assistance for small scale textile dyers and chemical suppliers within the Sekondi-Takoradi Metropolitan Area of Ghana. Case Study, a descriptive research approach is used because data came mainly from archives, library and by direct observation of textile production practices at the small-scale level. The population for the study involved batik producers, tie-dye producers, screen printers and textile chemical suppliers and dealers. Interviews and observations were used in soliciting relevant data. Data collected was analysed and presented. The study suggests appropriate ways of working with dyes and other chemicals for dyeing. It also simplified information on the available Material Safety Data Sheets (MSDS) for the understanding of the textile producers. This was tailored towards improving communication with the small-scale textile producers who collectively constitute a big percentage of textile producers in Ghana.展开更多
文摘Despite numerous research investigations to understand the influences of various structural parameters,to the authors'knowledge,no research has been the effect of different angles of incidence on stab response and performance of different types of protective textiles.Three distinct structures of 3D woven textiles and 2D plain weave fabric made with similar high-performance fiber and areal density were designed and manufactured to be tested.Two samples,one composed of a single and the other of 4-panel layers,from each fabric type structure,were prepared,and tested against stabbing at[0○],[22.5○],and[45○]angle of incidence.A new stabbing experimental setup that entertained testing of the specimens at various angles of incidence was engineered and utilized.The stabbing bench is also equipped with magnetic sensors and a UK Home Office Scientific Development Branch(HOSDB)/P1/B sharpness engineered knives to measure the impact velocity and exerted impact energy respectively.A silicon compound was utilized to imprint the Back Face Signature(BFS)on the backing material after every specimen test.Each silicon print was then scanned,digitized,and precisely measured to evaluate the stab response and performance of the specimen based on different performance variables,including Depth of Trauma(DOT),Depth of Penetration(DOP),and Length of Penetration(LOP).Besides,the post-impact surface failure modes of the fabrics were also measured using Image software and analyzed at the microscale level.The results show stab angle of incidence greatly influences the stab response and performance of protective textiles.The outcome of the study could provide not only valuable insights into understanding the stab response and capabilities of protective textiles under different angle of incidence,but also provide valuable information for protective textile manufacturer,armor developer and stab testing and standardizing organizations to consider the angle of incidence while developing,testing,optimizing,and using protective textiles in various applications.
文摘Stab-resistant textiles play a critical role in personal protection,necessitating a deeper understanding of how structural and layering factors influence their performance.The current study experimentally examines the effects of textile structure,layering,and ply orientation on the stab resistance of multi-layer textiles.Three 3D warp interlock(3DWI)structures({f1},{f2},{f3})and a 2D woven fabric({f4}),all made of high-performance p-aramid yarns,were engineered and manufactured.Multi-layer specimens were prepared and subjected to drop-weight stabbing tests following HOSBD standards.Stabbing performance metrics,including Depth of Trauma(DoT),Depth of Penetration(DoP),and trauma deformation(Ymax,Xmax),were investigated and analyzed.Statistical analyses(Two-and One-Way ANOVA)indicated that fabric type and layer number significantly impacted DoP(P<0.05),while ply orientation significantly affected DoP(P<0.05)but not DoT(P>0.05).Further detailed analysis revealed that 2D woven fabrics exhibited greater trauma deformation than 3D WIF structures.Increasing the number of layers reduced both DoP and DoT across all fabric structures,with f3 demonstrating the best performance in multi-layer configurations.Aligned ply orientations also enhanced stab resistance,underscoring the importance of alignment in dissipating impact energy.
文摘Electrospinning has gained significant importance across various fields,including biomedicine,filtration,and packaging due to the control it provides over the properties of the resulting materials,such as fiber diameter and membrane thickness.Chitosan is a biopolymer that can be utilized with both natural and synthetic copolymers,owing to its therapeutic potential,biocompatibility,and biodegradability.However,producing electrospun chitosan is challenging due to its high solution viscosity,which often results in the formation of beads instead of uniform fibers.To address this issue,the spinnability of chitosan is significantly enhanced,and the production of continuous nanofibers is facilitated by combining it with polymers such as polyethylene oxide(PEO)in suitable ratios.These chitosan–PEO nanofibers are primarily used in biomedical applications,including wound healing,drug delivery systems,and tissue engineering scaffolds.Additionally,they have shown promise in water treatment,filtration membranes,and packaging.Among all the nanofiber mats,chitosan/PEO-AC had the smallest fiber diameter(83±12.5 nm),chitosan/PEO_45S5 had the highest tensile strength(1611±678 MPa).This comprehensive review highlights recent advancements,ongoing challenges,and future directions in the electrospinning of chitosan-based fibers assisted by PEO.
文摘To enhance the hydrophilicity and antistatic properties of the polyethylene terephthalate(PET)fabric,the lawsone dye was employed in dyeing the PET fabric.It was dissolved in ethanol/deionized water mixture and deionized water separately,forming different lawsone dye solutions(LDSs).The study investigated how the compounds in the LDS improve the surface properties and color durability of the PET fabric,resulting in increased dye uptake.An infrared dyeing machine was utilized to expedite the reactions between the lawsone dye and the PET fabric.Additionally,the chemical composition of the dyed PET fabric was verified using techniques such as Fourier transform infrared(FTIR)spectroscopy,X-ray photoelectron spectroscopy(XPS),X-ray diffraction(XRD)and ultraviolet-visible(UV-Vis)spectrophotometry.The K/S value was measured to assess color durability.After dyeing,the PET fabric exhibited high hydrophilicity which improved the hygroscopicity of the PET fabric and thus the conductivity of the PET fabric surface increased,thereby providing an antistatic effect.
文摘Global warming is making plants more susceptible to heat stress.Hence,adjustments to crop production systems are required for global food security.Heat stress(HS)poses a threat to the quality of ecosystems and global food security due to its adverse effects on plant development.The degree to which HS affects physiological disruptions,physical harm,and biochemical changes at various growth stages directly correlates with its effects on physiological functions,plant growth,and crop production.One promising approach is soil modification using biochar,which enhances soil health and promotes the development of microbial communities,ultimately improving plant heat tolerance.Biochar enhances soil structure,improves moisture retention,and increases nutrient availability in hot weather,thereby promoting plant growth and enhancing crop yields.Additionally,biochar,with its porous structure and ability to provide a liming effect,increases the diversity and activity of soil microbes,thereby fostering advantageous symbiotic relationships.These microbial communities support nutrient cycling,root growth,and general soil health,strengthening biochar’s position as a long-term solution for climate-resilient farming.Earlier research concentrated on the connection between biochar and heat stress or microbial populations;however,this review uniquely combines all three elements,providing a fresh viewpoint on their interrelated functions in enhancing plant adaptability.Furthermore,this study demonstrates the potential of biochar as a sustainable component for improving soil and supporting crops that adapt to heat stress.It examines the processes underlying these interactions and provides recommendations for future research strategies.
基金supported by the National Natural Science Foundation,China(Nos.52073224,12472141 and 12002248)the Natural Science Foundation of Shaanxi Province,China(Nos.2023KXJ-034 and 2023KXJ-005)+3 种基金Xi’an Science and Technology Plan Project,China(No.2022JH-ZCZC-0004)the Young Talent Fund of University Association for Science and Technology in Shaanxi,China(No.20210509)the Scientific Research Project of Shaanxi Provincial Education Department,China(No.22JC035)Shaanxi Outstanding Youth Science Fund Project,China(No.2024JC-JCQN-03).
文摘This paper reports the effects of fiber breakage defects and waviness defects on the compressive fatigue behavior and the progressive damage evolution process of 3D Multiaxial Braided Composites (3DMBCs). Combined with finite element compression simulation and ultra-depth microscope, the internal defect content of composites with different braiding angles was determined. The results demonstrate that the weakening effect of waviness and fiber breakage defects is greater than the strengthening effect of the braiding angle. This causes the fatigue resistance of 3DMBCs with the 31° braiding angle being better in both directions of 0° and 90°. The increase of 4° waviness and 10% fiber breakage defect results in the average fatigue life of composites being shortened by 48% and the energy consumption rate increased by 10% at 85% stress level in 90° compression direction. The alteration in loading direction modifies the included angle corresponding to the stress component. The stress component parallel to the fiber direction under compressive fatigue load leads to interfacial debonding in the composites, whereas the stress component perpendicular to the fiber direction results in pronounced shear failure.
基金funding from Commonwealth Scholarship Commission(CSC)U.K.for a Ph.D.scholarship for Marzia DulalUKRI Research England the Expanding Excellence in England(E3)grant.
文摘Wearable electronic textiles(e-textiles)with embedded electronics offer promising solutions for unobtrusive,real-time health monitoring,enhancing healthcare efficiency.However,their adoption is limited by performance and sustainability challenges in materials,manufacturing,and recycling.This study introduces a sustainable paradigm for the fabrication of fully inkjet-printed Smart,Wearable,and Eco-friendly Electronic Textiles(SWEET)with the first comprehensive assessments of the biodegradability and life cycle assessment(LCA).SWEET addresses existing limitations,enabling concurrent and continuous monitoring of human physiology,including skin surface temperature(at temperature coefficient of resistance,TCR value of~-4.4%℃^(-1))and heart rate(-74 beats per minute,bpm)separately and simultaneously like the industry gold standard,using consistent,versatile,and highly efficient inkjet-printed graphene and Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate)(PEDOT:PSS)-based wearable e-textiles.Demonstrations with a wearable garment on five human participants confirm the system’s capability to monitor their electrocardiogram(ECG)signals and skin temperature.Such sustainable and biodegradable e-textiles decompose by-48%in weight and lost-98%strength over 4months.Life cycle assessment(LCA)reveals that the graphene-based electrode has the lowest climate change impact of-0.037 kg CO_(2) eq,40 times lower than reference electrodes.This approach addresses material and manufacturing challenges,while aligning with environmental responsibility,marking a significant leap forward in sustainable e-textile technology for personalized healthcare management.
文摘In this paper, the knot strengths of the seven strands which were made of polyethleneterephthalate(PET), nylon 6, polyvinyl formal fibre, polypropylene and polyethylene with differentspecification used for industrial purposes were tested and discussed. The results of experimentshow: the knot strength loss does not only depend on the breaking elongation and the diameter ofsample, but also on the shape of the load-extension curve and twist factor of sample and other fac-tors; the range of the knot strength loss and the breaking energy loss vary in a wide range, in thepresent case. the former is from 2.7% to 58.14% and the latter from 16.36% to 78.76%. Thestrength loss of the polypropylene filament is the least among the samples investigated.
文摘In this study, jute woven fabrics (1 × 1 plain, twill, zigzag and diamond weave) were manufactured from 100% raw jute yarn. The fabric specimens were treated by 5%, 10%, 15%, 20% and 25% unsaturated polyester resin where styrene monomer used as a solvent and 1% methyl ethyl ketone peroxide (MEKP) was used as initiator. Two bar pressure was applied for complete wetting of the fabric by a Padder and curing was done at 130?C for 10 minutes. The physico-mechanical characteristics of untreated and treated samples were examined and evaluated. It was revealed that moisture content (MC) and water absorbency of the treated specimens were decreased with the increase of resin percentage (%) in the fabrics. MC and water absorbency were maximum decreased up to 50.23% and 60.14% respectively by 25% resin treatment. On the other hand, bending length (BL), flexural rigidity (FR), flexural modulus (FM) and tensile strength (TS) were enhanced with the increase of resin percentage in the fabrics which resulted higher fabric stiffness. The maximum improvement of BL, FR, FM and TS were found to be 6.67%, 56.04%, 10.57% and 18.75% respectively in comparison to untreated sample. Soil degradation tests exhibited that 33.59% TS loss occurred for untreated specimens where only 8.04% loss of TS found for 25% resin treated one. Furthermore, jute based twill, zigzag and diamond fabrics were also treated by 10%, 15%, 20% and 25% resin, then measured their TS and compared with plain fabrics. It was revealed that plain fabrics have superior TS over other fabrics. It was also evident that TS enhanced for all the fabrics after resin treatment and maximum increase found for all the fabrics up to 25% resin treatment.
文摘Denim was produced in the city of Nîmes in France and was originally called the serge de Nîmes.The word denim is an English colloquialism of the French term:"denim."Day by day Bangladesh denim sector very much developed and helps to increase productivity.Bangladesh have seen a significant increase in investing in denim fabric manufacturing,increasing the country’s production performance by reducing fabric dependence on imports.It is important due to its aspects of durability,and not easily torn which benefited physical laborers much.The government also plays a vital role in denim textile industry.This paper shows different section of denim textile industry such as:sewing section,cutting section,washing,IE and finishing department.The main aim of this paper is how to role all the section of denim textile industry.Textile education is insufficient without industry attachment,which bridges the gap between theoretical and practical aspects and acclimates students to the industrial world.We can gain about theoretical development on an industrial level from this attachment.We can understand more about the machines used in various departments,their technical specifications,characteristics,operating system,and so on,and we believe that without this type of industrial connection,it is impossible to obtain industry-based information about textile engineering adequately.The Industrial Attachment on Denim Manufacturing Technology was used to organize this study(sewing section,cutting,IE,washing section,CAD Section,and finishing department.Various operating procedures for the production of denim in the industry are presented in this paper.The technique and process of several procedures and processes are presented here such as machine specifications,manpower,maintenance,layout of the different section,dye processes and wet processes.
基金support from Iran’s National Elites Foundation(INEF).
文摘Tissue engineering is nowadays an emerging approach that aims to replace or regenerate diseased or damaged organs with engineered constructs. Considering the key role of growth factors (GFs) in the tissue regeneration process, these biomolecules are considered an important part of the tissue engineering process, so the presence of growth factors in engineered scaffolds can accelerate tissue regeneration by influencing the behavior of cells. Platelet-rich plasma (PRP), as an autologous source of a variety of growth factors, is considered a therapeutic agent for the treatment of degenerative diseases. Regarding its ability to promote the healing process and tissue regeneration, PRP therapy has attracted great attention in bone and cartilage tissue engineering. Incorporating PRP and its derivatives into engineered scaffolds not only bioactivates the scaffold, but the scaffold matrix also acts as a sustained and localized growth factor release system. In addition, the presence of a scaffold can promote the bioactivity of GFs by providing an environment that facilitates their interaction, leading to enhanced effects compared to their free form. This review presents a brief overview of PRP's role in bone and cartilage tissue regeneration with the main focus on scaffold-mediated PRP delivery. In addition, the classification of platelet-rich products, current extraction techniques, terminology, and scaffold bioactivation methods are presented to provide a better understanding of the basics and the key aspects that may affect the effectiveness of therapy in bone and cartilage tissue engineering.
文摘The main objective of this research work was the development of novel and responsive nonwoven composite structures containing gelling materials for wound management. The development of novel all inclusive collagen booster(CB) therapeutic nonwoven wound dressings was mainly focused on. It provides essential functional properties such as high absorption,vertical and lateral wicking,and antibacterial and acidic pH properties. The developed composite wound dressing consisted of carboxymethylcellulose(CMC) fibre and also it was reinforced with polylactic acid( PLA) fibre. The produced composite wound dressings were treated with two different CBs at 4% by using the spray method. The details of the CBs have not been disclosed in this paper due to the Intellectual Property Rights( IPR) issues. The important benefit of using CB treatment is that it allows the maintenance of an acidic pH environment at the wound area. It is well known that acidic pH reduces the wound healing time and enhances the wound healing process. Furthermore,one of the CBs not only promotes the proliferation of the epithelial cells in wounds but also can provide antibacterial action. The PLA fibre reinforced CMC composite dressing has enhanced wicking properties which help to minimise the pooling of exudate on the wound bed and as a result maceration is prevented. The CBs treated dressings maintain the wound bed in an acidic pH condition which also improves the wound healing process. In addition to the above-mentioned properties,the CB treatment imparts antimicrobial activity against Gram-positive and Gram-negative bacteria,thus resulting in the reduction in the propensity for wound infection. Ultimately,the research has proved that the 4% CB treatment enhances the antimicrobial activity and the acidic pH characteristics of the developed CMC /PLA composite wound dressings.
文摘In the world, there are more than 370 million indigenous and tribal people with especial culture and traditions. The Chakma’s is one of the groups of indigenous people dwelling Chittagong hill tracts in Bangladesh. Chakma’s has its own culture, tradition, literature, and costume designs. The design costumes of the Chakma’s play an essential role. The Chakma’s preserved their textile design in “Alam”. Alam is a kind of cloth embroidered with various designs carrying the heritage of the Chakma. The use of Alam began approximately 500 years ago. All used clothing in Chakma society is weaved manually in the back-strap loom, which is generally very time-consuming— this limits its design aesthetics and universal use. Because of globalisation, the use of the traditional design of Chakma’s are threatened today. Till today in our country and overseas, no attempts were taken for research of the traditional Chakma’s design. The purpose of this research is to upgrade and digitise Chakma’s designs. Furthermore, efforts were made for the automatization of the traditional process to preserve traditional Chakma’s designs. In this study analysis of the fabric designs, pattern structure, colour applications of the traditional Aalam design were constructed using small prototype Rapier loom technology. We found that most of the single designs of the Alam were possible to weave in small prototype modern loom. On the other hand, intricate designs were not possible to weave in small prototype loom but are possible in the jacquard loom. The key idea is to establish an approach to modernise the traditional weaving process in order to make it convenient, economical and less time-consuming.
文摘The objective of this research was to investigate the optimum condition for treatment of textile industrial wastewater from water jet loom machine by chemical coagulation and electrocoagulation methods. The variables of chemical coagulation method were type and amount of chemicals, pH and stirring rate. For electrocoagulation method, the variables were electrode materials, electric potential and contact time. It was found that the optimum condition of chemical coagulation method was 10% （w/w） of aqueous solution of aluminum sulphate 80 mL and 0.01% （w/w） of aqueous solution of coagulant aids, cationic polymer 32 mL per 4 L of wastewater at oH 8. The mixture solution was rapidly stirred with 120 rpm for 1 min and then slowly stirred with 20 rpm for 20 rain. The removal efficiency of turbidity, COD and oil content were 88.88%, 85.20% and 77.72%, respectively. For electrocoagulation method, the optimum condition was using aluminum electrode with 35 V and 150 min of contact time. The removal efficiency of turbidity, COD and oil content were 98.86%, 91.63% and 89.84%, respectively. It can be concluded from this study that the textile industrial wastewater treatment from water jet loom machine with electrocoagulation method is more efficient than that with chemical coagulation method.
文摘Ultra violet radiation is detrimental to human skin and responsible for various skin diseases that is now worldwide growing concern for the people. Sun screen lotions, however, considered best possible solution but its temporary attachment didn’t bring the real impact. The advancement of nano technology provides a number of techniques to introduce UV protected fabric by applying certain semi conductor metal oxide. So many researches have been carried out to coat the fabric using certain nano particles namely ZnO and TiO2 to improve the UV absorption capacity of material as well as increasing UPF value to protect the human skin which have been playing a significant role to provide UV protected clothing. This paper deals with the harmful impact of ultra violet radiation on human skin, UPF measurement method and UV protective finishing on textile material using nano ZnO and nano TiO2 particle.
文摘The automobiles, aircraft, and lightweight industries continuously demand thin near-net-shape preforms just out-of-machine as close to the final shape. This study addresses the possibilities of 3D thin shell textile preform as the solution of lightweight reinforcement in various applications. Investigation into the development of 3D thin shells has led to different manufacturing processes. However, 3D thin shell preforms are mostly made by weaving and knitting, but nonwoven, winding, and/or layup techniques have been reported for over a decade. Owing to the complex thin shell manufacturing processes, they are not similar to the conventional methods. The different 3D thin shell preforms can extend the opportunities for new applications in various technical fields. This study presents existing research gaps and a few potential issues to be solved regarding 3D thin shell preforms in the near future.
文摘The automobiles, aircraft, and lightweight industries continuously demand thin near-net-shape preforms just out-of-machine as close to the final shape. This study addresses the possibilities of 3D thin shell textile preform as the solution of lightweight reinforcement in various applications. Investigation into the development of 3D thin shells has led to different manufacturing processes. However, 3D thin shell preforms are mostly made by weaving and knitting, but nonwoven, winding, and/or layup techniques have been reported for over a decade. Owing to the complex thin shell manufacturing processes, they are not similar to the conventional methods. The different 3D thin shell preforms can extend the opportunities for new applications in various technical fields. This study presents existing research gaps and a few potential issues to be solved regarding 3D thin shell preforms in the near future.
文摘The ecological and sustainable product is the demand of the present world. But it was not possible to produce an ecological and sustainable product for all sectors as the world requires now. The synthetic material is used to produce flame retardant materials due to the unavailable sustainable ecological flame-retardant material. But different researchers are trying to produce sustainable ecological flame-retardant material. This research found that the Spinach leaves Juice, banana pseudostem sap (SAP) and eggshell powder have flame retardant properties. Different literature shows that the ash also has flame retardant properties. So researcher suggested developing the composite material from the above materials with cotton fibres. It may be more effective as fire-retardant composite materials.
文摘Textile chemicals such as dyes, printing pigments, additives, oxidising agents and reducing agents can be very injurious to the body and the environment if not properly used. The prime focus of this study is to promote and maintain a safe and healthy environment by ensuring the highest level of environmental health and safety assistance for small scale textile dyers and chemical suppliers within the Sekondi-Takoradi Metropolitan Area of Ghana. Case Study, a descriptive research approach is used because data came mainly from archives, library and by direct observation of textile production practices at the small-scale level. The population for the study involved batik producers, tie-dye producers, screen printers and textile chemical suppliers and dealers. Interviews and observations were used in soliciting relevant data. Data collected was analysed and presented. The study suggests appropriate ways of working with dyes and other chemicals for dyeing. It also simplified information on the available Material Safety Data Sheets (MSDS) for the understanding of the textile producers. This was tailored towards improving communication with the small-scale textile producers who collectively constitute a big percentage of textile producers in Ghana.
