The Govanda Formation was deposited during the Miocene in the intermontane areas between the Zagros suture and imbricate zones.The Govanda Formation was studied in the Sherwan Mazin area within Mergasor district,Erbil...The Govanda Formation was deposited during the Miocene in the intermontane areas between the Zagros suture and imbricate zones.The Govanda Formation was studied in the Sherwan Mazin area within Mergasor district,Erbil Governorate to identify the lithostratigraphy and microfacies analysis in order to determine the depositional environment of the formation.The formation in the studied section is 116 m thick and mainly consists of reddish-brown,hard,thickbedded,chert-bearing conglomerate,pinkish shale and yellowish-grey,thick-bedded,detrital,fossiliferous limestone.The formation is unconformably underlain by the Upper Cretaceous Tanjero Formation and conformably overlain by the Merga Red Beds series.Four different lithostratigraphic units were identified,based on field observation and petrographic analysis,including a basal conglomerate unit(A),a shale unit(B),a well-bedded limestone unit(C)and a thick and massively-bedded limestone unit(D).The presence of a thick conglomerate bed at the base of the formation indicates a large unconformity that lasted nearly 40 million years.Based on detailed microfacies analysis of carbonate rocks,five main microfacies and 15 submicrofacies are recognized.The main microfacies types include mudstone,wackestone,packstone,grainstone and boundstone microfacies.Based on the microfacies types the depositional environment are defined as open lagoon,reef,fore-reef and back-reef environments of normal to saline,nutrient rich water.展开更多
Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow ...Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone.展开更多
Formation testing while drilling is an innovative technique that is replacing conventional pressure testing in which the fluid sampling is conducted in a relatively short time following the drilling. At this time, mud...Formation testing while drilling is an innovative technique that is replacing conventional pressure testing in which the fluid sampling is conducted in a relatively short time following the drilling. At this time, mud invasion has just started, mudcake has not formed entirely and the formation pressure is not stable. Therefore, it is important to study the influence of the downhole dynamic environment on pressure testing and fluid sampling. This paper applies an oil-water two phase finite element model to study the influence of mudcake quality and mud filtrate invasion on supercharge pressure, pretest and sampling in the reservoirs of different permeability. However, the study is only for the cases with water based mud in the wellbore. The results illustrate that the mudcake quality has a significant influence on the supercharge pressure and fluid sampling, while the level of mud filtrate invasion has a strong impact on pressure testing and sampling. In addition, in-situ formation pressure testing is more difficult in low permeability reservoirs as the mud filtrate invasion is deeper and therefore degrades the quality of fluid sampling. Finally, a field example from an oil field on the Alaskan North Slope is presented to validate the numerical studies of the effects of downhole dynamic conditions on formation testing while drilling.展开更多
This paper studies electrical resistivity dataset acquired for a groundwater study in the Domail Plain in the northwestern Himalayan section of Pakistan. Through a combination of geostatistical analysis,geophysical in...This paper studies electrical resistivity dataset acquired for a groundwater study in the Domail Plain in the northwestern Himalayan section of Pakistan. Through a combination of geostatistical analysis,geophysical inversion and visualization techniques,it is possible to re-model and visualize the single dimension resistivity data into 2D and 3D space.The variogram models are utilized to extend the interpretation of the data and to distinguish individual lithologic units and the occurrence of saline water within the subsurface. The resistivity data has been calibrated with the lithological logs taken from the available boreholes. As such the alluvial system of the Domail Plain has formed during episodes of local tectonic activity with fluvial erosion and depositionyielding coarse sediments with high electrical resistivities near to the mountain ranges and finer sediments with medium to low electrical resistivities which tend to settle in the basin center. Thus a change is depositional setting happened from basin lacustrine environment to flash flooding during the Himalayan orogeny. The occurrence of rock salt in the northern mountains has imparted a great influence on the groundwater quality of the study area. The salt is dissolved by water which infiltrates into the subsurface through the water channels. Variogram aided gridding of resistivity data helps to identify the occurrence and distribution of saline water in the subsurface.展开更多
Petrophysical properties of the Early Cretaceous Sarmord and Garagu formations from the Atrush and Sarsang Blocks in the Kurdistan Region are studied. These formations are generally composed of limestones and dolomiti...Petrophysical properties of the Early Cretaceous Sarmord and Garagu formations from the Atrush and Sarsang Blocks in the Kurdistan Region are studied. These formations are generally composed of limestones and dolomitic limestones interbedded with thin to medium layers of yellowish-gray marl (calcareous mudstone). The current study shows that the average shale volume in the Sarmord and Garage formations is between 16% and 20%. In Atrush-1 Well, the average porosity ratio of the Sarmord and Garagu formations is fair to good (15% and 11%, respectively). However, in Mangesh-1 Well, the porosity value is poor;it is around 4% on average. Generally, most of the hydrocarbons that have been observed within the pore spaces are residual oil type in Atrush-1 Well and movable hydrocarbon type in Mangesh-1 Well. In Atrush-1 Well, out of 362 m thickness of both formations, only 180 m is considered to be a pay zone;whereas, the pay zone is just around 8.0 m thick out of 347 m of the total thickness. According to the calculated porosity values, the Garagu and Sarmord formations are not considered as good reservoirs in the studied wells, with the exception of Atrush-1 Well where the Sarmord Formation has fair potential reservoir characteristics.展开更多
In this paper, we propose a hybrid PML （H-PML） combining the normal absorption factor of convolutional PML （C-PML） with tangential absorption factor of Mutiaxial PML （M-PML）. The H-PML boundary conditions can be...In this paper, we propose a hybrid PML （H-PML） combining the normal absorption factor of convolutional PML （C-PML） with tangential absorption factor of Mutiaxial PML （M-PML）. The H-PML boundary conditions can better suppress the numerical instability in some extreme models, and the computational speed of finite-element method and the dynamic range are greatly increased using this HPML. We use the finite-element method with a hybrid PML to model the acoustic reflection of the interface when wireline and well logging while drilling （LWD）, in a formation with a reflector outside the borehole. The simulation results suggests that the PS- and SP- reflected waves arrive at the same time when the inclination between the well and the outer interface is zero, and the difference in arrival times increases with increasing dip angle. When there are fractures outside the well, the reflection signal is clearer in the subsequent reflection waves and may be used to identify the fractured zone. The difference between the dominant wavelength and the model scale shows that LWD reflection logging data are of higher resolution and quality than wireline acoustic reflection logging.展开更多
The present study focuses on source rock evaluation of the Sargelu Formation by using core chips of rocks collected from well Atrush-2, Duhok, Kurdistan Region-Iraq. The Rock-Eval pyrolysis and vitrinite reflectance w...The present study focuses on source rock evaluation of the Sargelu Formation by using core chips of rocks collected from well Atrush-2, Duhok, Kurdistan Region-Iraq. The Rock-Eval pyrolysis and vitrinite reflectance were executed. Subsequently, the selected parameters were used for source rock evaluation and 1-D Basin Modelling calibration. The upper part of the formation mainly comprises argillaceous limestone with low content of organic matter (0.64% - 1% TOC). By contrast, the lower part is dominated with shale interval and contains high amounts of TOC values (>4% for 1272 - 1278 m) reveling good to very good quality source rock. Accordingly, good to very good hydrocarbon generation potential is suggested for this formation. Organic matter of the Sargelu Formation contains type II and mixed-type II-III kerogen. The values of Tmax and vitrinite reflectance (Ro%) demonstrate that the formation is thermally mature and in the oil zone. In order to construct a thermal history of the formation and determine the timing of hydrocarbon maturation and generation, the 1-D basin modelling PetroMod 2019.1 was used in this study. Based on the 1-D Basin modelling simulation and its outputs, about 3500 m of overburden have been eroded at the study area. The present-day heat flow was found to be 30 mW/m2. The organic matter of Sargelu Formation entered the early oil zone in 64 Ma and reached the main oil zone ca. 5 Ma. The formation is still in the main oil zone at present-day. In well Atrush-2, the highest rate of oil generation for the Sargelu Formation was in the 8.5 Ma, the onset of oil expulsion from Sargelu Formation was in 50 Ma and the expulsion mass has been reached 0.5 Mtons at present-day.展开更多
文摘The Govanda Formation was deposited during the Miocene in the intermontane areas between the Zagros suture and imbricate zones.The Govanda Formation was studied in the Sherwan Mazin area within Mergasor district,Erbil Governorate to identify the lithostratigraphy and microfacies analysis in order to determine the depositional environment of the formation.The formation in the studied section is 116 m thick and mainly consists of reddish-brown,hard,thickbedded,chert-bearing conglomerate,pinkish shale and yellowish-grey,thick-bedded,detrital,fossiliferous limestone.The formation is unconformably underlain by the Upper Cretaceous Tanjero Formation and conformably overlain by the Merga Red Beds series.Four different lithostratigraphic units were identified,based on field observation and petrographic analysis,including a basal conglomerate unit(A),a shale unit(B),a well-bedded limestone unit(C)and a thick and massively-bedded limestone unit(D).The presence of a thick conglomerate bed at the base of the formation indicates a large unconformity that lasted nearly 40 million years.Based on detailed microfacies analysis of carbonate rocks,five main microfacies and 15 submicrofacies are recognized.The main microfacies types include mudstone,wackestone,packstone,grainstone and boundstone microfacies.Based on the microfacies types the depositional environment are defined as open lagoon,reef,fore-reef and back-reef environments of normal to saline,nutrient rich water.
基金Institute of Hydrocarbon Recovery, Universiti Teknology PETRONAS and Petroliam Nasional Berhad, Malaysia Oil and Gas Company for funding this research project (YUTP cost # 0153AA-E79)
文摘Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone.
基金supported by the National Natural Science Foundation of China (No. 50674098)Major Project of Chinese Science and Technology (No. 2011ZX 05000-020-04)Major Project of SINOPEC Science and Technology (No. P13147)
文摘Formation testing while drilling is an innovative technique that is replacing conventional pressure testing in which the fluid sampling is conducted in a relatively short time following the drilling. At this time, mud invasion has just started, mudcake has not formed entirely and the formation pressure is not stable. Therefore, it is important to study the influence of the downhole dynamic environment on pressure testing and fluid sampling. This paper applies an oil-water two phase finite element model to study the influence of mudcake quality and mud filtrate invasion on supercharge pressure, pretest and sampling in the reservoirs of different permeability. However, the study is only for the cases with water based mud in the wellbore. The results illustrate that the mudcake quality has a significant influence on the supercharge pressure and fluid sampling, while the level of mud filtrate invasion has a strong impact on pressure testing and sampling. In addition, in-situ formation pressure testing is more difficult in low permeability reservoirs as the mud filtrate invasion is deeper and therefore degrades the quality of fluid sampling. Finally, a field example from an oil field on the Alaskan North Slope is presented to validate the numerical studies of the effects of downhole dynamic conditions on formation testing while drilling.
基金Water and Power Development Authority(WAPDA)is hereby acknowledged for their support in th e present study.
文摘This paper studies electrical resistivity dataset acquired for a groundwater study in the Domail Plain in the northwestern Himalayan section of Pakistan. Through a combination of geostatistical analysis,geophysical inversion and visualization techniques,it is possible to re-model and visualize the single dimension resistivity data into 2D and 3D space.The variogram models are utilized to extend the interpretation of the data and to distinguish individual lithologic units and the occurrence of saline water within the subsurface. The resistivity data has been calibrated with the lithological logs taken from the available boreholes. As such the alluvial system of the Domail Plain has formed during episodes of local tectonic activity with fluvial erosion and depositionyielding coarse sediments with high electrical resistivities near to the mountain ranges and finer sediments with medium to low electrical resistivities which tend to settle in the basin center. Thus a change is depositional setting happened from basin lacustrine environment to flash flooding during the Himalayan orogeny. The occurrence of rock salt in the northern mountains has imparted a great influence on the groundwater quality of the study area. The salt is dissolved by water which infiltrates into the subsurface through the water channels. Variogram aided gridding of resistivity data helps to identify the occurrence and distribution of saline water in the subsurface.
文摘Petrophysical properties of the Early Cretaceous Sarmord and Garagu formations from the Atrush and Sarsang Blocks in the Kurdistan Region are studied. These formations are generally composed of limestones and dolomitic limestones interbedded with thin to medium layers of yellowish-gray marl (calcareous mudstone). The current study shows that the average shale volume in the Sarmord and Garage formations is between 16% and 20%. In Atrush-1 Well, the average porosity ratio of the Sarmord and Garagu formations is fair to good (15% and 11%, respectively). However, in Mangesh-1 Well, the porosity value is poor;it is around 4% on average. Generally, most of the hydrocarbons that have been observed within the pore spaces are residual oil type in Atrush-1 Well and movable hydrocarbon type in Mangesh-1 Well. In Atrush-1 Well, out of 362 m thickness of both formations, only 180 m is considered to be a pay zone;whereas, the pay zone is just around 8.0 m thick out of 347 m of the total thickness. According to the calculated porosity values, the Garagu and Sarmord formations are not considered as good reservoirs in the studied wells, with the exception of Atrush-1 Well where the Sarmord Formation has fair potential reservoir characteristics.
基金supported by the National Natural Science Foundation of China(No.41204094)Science Foundation of China University of Petroleum,Beijing(No.2462015YQ0506)
文摘In this paper, we propose a hybrid PML （H-PML） combining the normal absorption factor of convolutional PML （C-PML） with tangential absorption factor of Mutiaxial PML （M-PML）. The H-PML boundary conditions can better suppress the numerical instability in some extreme models, and the computational speed of finite-element method and the dynamic range are greatly increased using this HPML. We use the finite-element method with a hybrid PML to model the acoustic reflection of the interface when wireline and well logging while drilling （LWD）, in a formation with a reflector outside the borehole. The simulation results suggests that the PS- and SP- reflected waves arrive at the same time when the inclination between the well and the outer interface is zero, and the difference in arrival times increases with increasing dip angle. When there are fractures outside the well, the reflection signal is clearer in the subsequent reflection waves and may be used to identify the fractured zone. The difference between the dominant wavelength and the model scale shows that LWD reflection logging data are of higher resolution and quality than wireline acoustic reflection logging.
文摘The present study focuses on source rock evaluation of the Sargelu Formation by using core chips of rocks collected from well Atrush-2, Duhok, Kurdistan Region-Iraq. The Rock-Eval pyrolysis and vitrinite reflectance were executed. Subsequently, the selected parameters were used for source rock evaluation and 1-D Basin Modelling calibration. The upper part of the formation mainly comprises argillaceous limestone with low content of organic matter (0.64% - 1% TOC). By contrast, the lower part is dominated with shale interval and contains high amounts of TOC values (>4% for 1272 - 1278 m) reveling good to very good quality source rock. Accordingly, good to very good hydrocarbon generation potential is suggested for this formation. Organic matter of the Sargelu Formation contains type II and mixed-type II-III kerogen. The values of Tmax and vitrinite reflectance (Ro%) demonstrate that the formation is thermally mature and in the oil zone. In order to construct a thermal history of the formation and determine the timing of hydrocarbon maturation and generation, the 1-D basin modelling PetroMod 2019.1 was used in this study. Based on the 1-D Basin modelling simulation and its outputs, about 3500 m of overburden have been eroded at the study area. The present-day heat flow was found to be 30 mW/m2. The organic matter of Sargelu Formation entered the early oil zone in 64 Ma and reached the main oil zone ca. 5 Ma. The formation is still in the main oil zone at present-day. In well Atrush-2, the highest rate of oil generation for the Sargelu Formation was in the 8.5 Ma, the onset of oil expulsion from Sargelu Formation was in 50 Ma and the expulsion mass has been reached 0.5 Mtons at present-day.
