In the recent research field of bone tissue engineering, polymeric materials play an implacable role in mimes the natural behavior of hard and soft tissues. In some medical conditions such as diabetics, osteoarthritis...In the recent research field of bone tissue engineering, polymeric materials play an implacable role in mimes the natural behavior of hard and soft tissues. In some medical conditions such as diabetics, osteoarthritis, burns, or joint replacement conditions, this polymeric materials implication enhances the internal mechanical activities which result in the early recovery of disease by facilitating the wound healing process. In this study, hybrid films have been synthesized based on polyvinyl alcohol (PVA), gelatin, and gelatin with glycerin incorporated with different concentrations of pre-prepared hydroxyapatite (HAP) by solution casting method at room temperature in biosafety cabinet. Glutaraldehyde has been added as a crosslinker in this whole procedure. The mechanical property, swelling, and porosity percentage have been conducted to characterize the structural stability of the synthesized hybrid films. Porosity and swelling of samples are also represented by proper biocompatibility (>90% porosity and swelling in DDW and PBF vary between 287%~72%). Tensile strength (TS), E modulus (Young’s modulus), Elongation at maximum, and Elongation at break are observed to perceive the mechanical properties of hybrid film samples, which are compatible with mechanical properties of different tissue such as trabecular bone, articular cartilage, tendon, nerve and skin tissue. Though, biocompatibility tests both in vivo and in vitro are essential for clinical application in the future. However, the experiment carried out till now explains the true possibility of newly synthesized hybrid films for long-term drug delivery directly on wound sites for wound healing and burn dressing patients in head-neck surgery reconstruction, diabetic gangrene foot, as well as cartilage or joint replacement therapy.展开更多
With the modern advancement of treatment approaches in medical science, the application of biomaterials in tissue engineering provides a remarkable opportunity to overcome graft rejection as well as proper wound heali...With the modern advancement of treatment approaches in medical science, the application of biomaterials in tissue engineering provides a remarkable opportunity to overcome graft rejection as well as proper wound healing. In this study, novel hybrid films have been synthesized by incorporation of polyvinyl alcohol (PVA), gelatin, and gelatin with glycerin along with different concentrations of pre-prepared hydroxyapatite (HAP) by solution casting method at room temperature in a biosafety cabinet. Glutaraldehyde has been added as a crosslinker in this whole procedure. Fourier-transform infrared spectroscopy (FTIR), X-Ray Diffraction (XRD) have been conducted to observe and compare the structural and chemical stability of the synthesized hybrid film properties. The FTIR results and X-Ray Diffraction analyses confirmed the chemical interactions between HAP, PVA, gelatin, and glycerin have occurred. The crystallinity of HAP also remains in all the prepared hybrid film samples that are observed in XRD. It is expected that these newly synthesized hybrid films could be a better opportunity for various sectors of tissue engineering such as skin, bone, tendon, and cartilage. These synthesized hybrid films can be suitable for wound healing covering. These studies could be a new scope for long-term drug delivery directly on wound sites in diabetic gangrene foot or burn patients as well as cartilage or joint replacement therapy.展开更多
Aluminum based metal matrix composites were fabricated using stir casting where silicon carbide and alumina were the reinforcements. Different types of properties (physical-density, mechanical-tensile, hardness, chemi...Aluminum based metal matrix composites were fabricated using stir casting where silicon carbide and alumina were the reinforcements. Different types of properties (physical-density, mechanical-tensile, hardness, chemical-corrosion etc.) were measured and compared with base metals/alloys. The properties were significantly varied. The highest density was obtained for pure aluminium with 5% Al<sub>2</sub>O<sub>3</sub> whereas the lowest was obtained for AA-4032 alloy. The highest hardness was obtained for AA-4032 with 5% Al<sub>2</sub>O<sub>3</sub> whereas the lowest was obtained for pure Al with 5% Al<sub>2</sub>O<sub>3</sub>. The highest strength was obtained for AA-6061 with 5% coarse SiC whereas the lowest was obtained for pure Al. The highest impact strength was obtained for AA-4032 with 5% Al<sub>2</sub>O<sub>3</sub> whereas the lowest was obtained for AA-6061. The corrosion resistance of all composites was lower than that of the base materials.展开更多
文摘In the recent research field of bone tissue engineering, polymeric materials play an implacable role in mimes the natural behavior of hard and soft tissues. In some medical conditions such as diabetics, osteoarthritis, burns, or joint replacement conditions, this polymeric materials implication enhances the internal mechanical activities which result in the early recovery of disease by facilitating the wound healing process. In this study, hybrid films have been synthesized based on polyvinyl alcohol (PVA), gelatin, and gelatin with glycerin incorporated with different concentrations of pre-prepared hydroxyapatite (HAP) by solution casting method at room temperature in biosafety cabinet. Glutaraldehyde has been added as a crosslinker in this whole procedure. The mechanical property, swelling, and porosity percentage have been conducted to characterize the structural stability of the synthesized hybrid films. Porosity and swelling of samples are also represented by proper biocompatibility (>90% porosity and swelling in DDW and PBF vary between 287%~72%). Tensile strength (TS), E modulus (Young’s modulus), Elongation at maximum, and Elongation at break are observed to perceive the mechanical properties of hybrid film samples, which are compatible with mechanical properties of different tissue such as trabecular bone, articular cartilage, tendon, nerve and skin tissue. Though, biocompatibility tests both in vivo and in vitro are essential for clinical application in the future. However, the experiment carried out till now explains the true possibility of newly synthesized hybrid films for long-term drug delivery directly on wound sites for wound healing and burn dressing patients in head-neck surgery reconstruction, diabetic gangrene foot, as well as cartilage or joint replacement therapy.
文摘With the modern advancement of treatment approaches in medical science, the application of biomaterials in tissue engineering provides a remarkable opportunity to overcome graft rejection as well as proper wound healing. In this study, novel hybrid films have been synthesized by incorporation of polyvinyl alcohol (PVA), gelatin, and gelatin with glycerin along with different concentrations of pre-prepared hydroxyapatite (HAP) by solution casting method at room temperature in a biosafety cabinet. Glutaraldehyde has been added as a crosslinker in this whole procedure. Fourier-transform infrared spectroscopy (FTIR), X-Ray Diffraction (XRD) have been conducted to observe and compare the structural and chemical stability of the synthesized hybrid film properties. The FTIR results and X-Ray Diffraction analyses confirmed the chemical interactions between HAP, PVA, gelatin, and glycerin have occurred. The crystallinity of HAP also remains in all the prepared hybrid film samples that are observed in XRD. It is expected that these newly synthesized hybrid films could be a better opportunity for various sectors of tissue engineering such as skin, bone, tendon, and cartilage. These synthesized hybrid films can be suitable for wound healing covering. These studies could be a new scope for long-term drug delivery directly on wound sites in diabetic gangrene foot or burn patients as well as cartilage or joint replacement therapy.
文摘Aluminum based metal matrix composites were fabricated using stir casting where silicon carbide and alumina were the reinforcements. Different types of properties (physical-density, mechanical-tensile, hardness, chemical-corrosion etc.) were measured and compared with base metals/alloys. The properties were significantly varied. The highest density was obtained for pure aluminium with 5% Al<sub>2</sub>O<sub>3</sub> whereas the lowest was obtained for AA-4032 alloy. The highest hardness was obtained for AA-4032 with 5% Al<sub>2</sub>O<sub>3</sub> whereas the lowest was obtained for pure Al with 5% Al<sub>2</sub>O<sub>3</sub>. The highest strength was obtained for AA-6061 with 5% coarse SiC whereas the lowest was obtained for pure Al. The highest impact strength was obtained for AA-4032 with 5% Al<sub>2</sub>O<sub>3</sub> whereas the lowest was obtained for AA-6061. The corrosion resistance of all composites was lower than that of the base materials.
