Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic struct...Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.展开更多
It is crucial to predict the outputs of a thickening system,including the underflow concentration(UC)and mud pressure,for optimal control of the process.The proliferation of industrial sensors and the availability of ...It is crucial to predict the outputs of a thickening system,including the underflow concentration(UC)and mud pressure,for optimal control of the process.The proliferation of industrial sensors and the availability of thickening-system data make this possible.However,the unique properties of thickening systems,such as the non-linearities,long-time delays,partially observed data,and continuous time evolution pose challenges on building data-driven predictive models.To address the above challenges,we establish an integrated,deep-learning,continuous time network structure that consists of a sequential encoder,a state decoder,and a derivative module to learn the deterministic state space model from thickening systems.Using a case study,we examine our methods with a tailing thickener manufactured by the FLSmidth installed with massive sensors and obtain extensive experimental results.The results demonstrate that the proposed continuous-time model with the sequential encoder achieves better prediction performances than the existing discrete-time models and reduces the negative effects from long time delays by extracting features from historical system trajectories.The proposed method also demonstrates outstanding performances for both short and long term prediction tasks with the two proposed derivative types.展开更多
In the quest to minimize energy waste,the energy performance of buildings(EPB)has been a focus because building appliances,such as heating,ventilation,and air conditioning,consume the highest energy.Therefore,effectiv...In the quest to minimize energy waste,the energy performance of buildings(EPB)has been a focus because building appliances,such as heating,ventilation,and air conditioning,consume the highest energy.Therefore,effective design and planning for estimating heating load(HL)and cooling load(CL)for energy saving have become paramount.In this vein,efforts have been made to predict the HL and CL using a univariate approach.However,this approach necessitates two models for learning HL and CL,requiring more computational time.Moreover,the one-dimensional(1D)convolutional neural network(CNN)has gained popularity due to its nominal computa-tional complexity,high performance,and low-cost hardware requirement.In this paper,we formulate the prediction as a multivariate regression problem in which the HL and CL are simultaneously predicted using the 1D CNN.Considering the building shape characteristics,one kernel size is adopted to create the receptive fields of the 1D CNN to extract the feature maps,a dense layer to interpret the maps,and an output layer with two neurons to predict the two real-valued responses,HL and CL.As the 1D data are not affected by excessive parameters,the pooling layer is not applied in this implementation.Besides,the use of pooling has been questioned by recent studies.The performance of the proposed model displays a comparative advantage over existing models in terms of the mean squared error(MSE).Thus,the proposed model is effective for EPB prediction because it reduces computational time and significantly lowers the MSE.展开更多
This study investigated the role of Information and Communications Technology in an enhanced banking operation using Diamond Bank Plc, Imo State as a case study. The study was motivated by the fact that most industrie...This study investigated the role of Information and Communications Technology in an enhanced banking operation using Diamond Bank Plc, Imo State as a case study. The study was motivated by the fact that most industries, financial institutions rely on gathering, processing, analyzing, and providing information in order to meet the needs of customers. It was based on data primarily, collected from both the primary and secondary sources which seek to investigate role of Information and Communications Technology in the banking industry. This piece of work, through direct investigation, interviews and questionnaires used to examine the role of Information and Communication Technology, plays in the banking industries and how it has affected the employment generation in the industries. It was gathered that ICT has positively affected the bank, the employees and the customers. The result also shows the application has improved banking services, maintained high level of proficiency and efficiency, reduced the long time spent on queues and brought about increase in employment opportunities.展开更多
Governments worldwide have implemented non-pharmaceutical interventions(NPIs)to control the spread of coronavirus disease 2019(COVID-19),and it is crucial to accurately assess the effectiveness of such measures.Many s...Governments worldwide have implemented non-pharmaceutical interventions(NPIs)to control the spread of coronavirus disease 2019(COVID-19),and it is crucial to accurately assess the effectiveness of such measures.Many studies have quantified the risk of infection transmission and used simulations to compare the risk before and after the implementation of NPIs to judge policies’effectiveness.However,the choice of metric used to quantify the risk can lead to different conclusions regarding the effectiveness of a policy.In this study,we analyze the correlation between different transmission-risk metrics,pedestrian environments,and types of infectious diseases using simulation-generated data.Our findings reveal conflicting results among five different metric types in specific environments.More specifically,we observe that,when the randomness of pedestrian trajectories in indoor spaces is low,the closeness centrality exhibits a higher correlation coefficient with infection-based metrics than with contact-based metrics.Furthermore,even within the same pedestrian environment,the likelihood of discrepancies between infection-based metrics and other metrics increases for infectious diseases with low transmission rates.These results highlight the variability in the measured effectiveness of NPIs depending on the chosen metric.To evaluate NPIs accurately,facility managers should consider the type of facility and infectious disease and not solely rely on a single metric.This study provides a simulation model as a tool for future research and improves the reliability of pedestrian-simulation-based NPI effectiveness analysis methods.展开更多
Various techniques to diagnose eye diseases such as diabetic retinopathy(DR),glaucoma(GLC),and age-related macular degeneration(AMD),are possible through deep learning algorithms.A few recent studies have examined a c...Various techniques to diagnose eye diseases such as diabetic retinopathy(DR),glaucoma(GLC),and age-related macular degeneration(AMD),are possible through deep learning algorithms.A few recent studies have examined a couple of major diseases and compared them with data from healthy subjects.However,multiple major eye diseases,such as DR,GLC,and AMD,could not be detected simultaneously by computer-aided systems to date.There were just high-performance-outcome researches on a pair of healthy and eye-diseased group,besides of four categories of fundus image classification.To have a better knowledge of multi-categorical classification of fundus photographs,we used optimal residual deep neural networks and effective image preprocessing techniques,such as shrinking the region of interest,iso-luminance plane contrast-limited adaptive histogram equalization,and data augmentation.Applying these to the classification of three eye diseases from currently available public datasets,we achieved peak and average accuracies of 91.16%and 85.79%,respectively.The specificities for images from the eyes of healthy,GLC,AMD,and DR patients were 90.06%,99.63%,99.82%,and 91.90%,respectively.The better specificity performances may alert patient in an early stage of eye diseases to prevent vision loss.This study presents a possible occurrence of a multi-categorical deep neural network technique that can be deemed as a successful pilot study of classification for the three most-common eye diseases and can be used for future assistive devices in computer-aided clinical applications.展开更多
While the usage of digital ocular fundus image has been widespread in ophthalmology practice,the interpretation of the image has been still on the hands of the ophthalmologists which are quite costly.We explored a rob...While the usage of digital ocular fundus image has been widespread in ophthalmology practice,the interpretation of the image has been still on the hands of the ophthalmologists which are quite costly.We explored a robust deep learning system that detects three major ocular diseases:diabetic retinopathy(DR),glaucoma(GLC),and age-related macular degeneration(AMD).The proposed method is composed of two steps.First,an initial quality evaluation in the classification system is proposed to filter out poorquality images to enhance its performance,a technique that has not been explored previously.Second,the transfer learning technique is used with various convolutional neural networks(CNN)models that automatically learn a thousand features in the digital retinal image,and are based on those features for diagnosing eye diseases.Comparison performance of many models is conducted to find the optimal model which fits with fundus classification.Among the different CNN models,DenseNet-201 outperforms others with an area under the receiver operating characteristic curve of 0.99.Furthermore,the corresponding specificities for healthy,DR,GLC,andAMDpatients are found to be 89.52%,96.69%,89.58%,and 100%,respectively.These results demonstrate that the proposed method can reduce the time-consumption by automatically diagnosing multiple eye diseases using computer-aided assistance tools.展开更多
Object recognition and tracking are two of the most dynamic research sub-areas that belong to the field of Computer Vision.Computer vision is one of the most active research fields that lies at the intersection of dee...Object recognition and tracking are two of the most dynamic research sub-areas that belong to the field of Computer Vision.Computer vision is one of the most active research fields that lies at the intersection of deep learning and machine vision.This paper presents an efficient ensemble algorithm for the recognition and tracking of fixed shapemoving objects while accommodating the shift and scale invariances that the object may encounter.The first part uses the Maximum Average Correlation Height(MACH)filter for object recognition and determines the bounding box coordinates.In case the correlation based MACH filter fails,the algorithms switches to a much reliable but computationally complex feature based object recognition technique i.e.,affine scale invariant feature transform(ASIFT).ASIFT is used to accommodate object shift and scale object variations.ASIFT extracts certain features from the object of interest,providing invariance in up to six affine parameters,namely translation(two parameters),zoom,rotation and two camera axis orientations.However,in this paper,only the shift and scale invariances are used.The second part of the algorithm demonstrates the use of particle filters based Approximate Proximal Gradient(APG)technique to periodically update the coordinates of the object encapsulated in the bounding box.At the end,a comparison of the proposed algorithm with other stateof-the-art tracking algorithms has been presented,which demonstrates the effectiveness of the proposed algorithm with respect to the minimization of tracking errors.展开更多
Electrocardiogram(ECG)electrodes are conductive pads applied to the skin to measure cardiac activity.Ag/AgCl electrodes are the commercial product which widely used to obtain ECGs.When monitoring the ECG in a hot spri...Electrocardiogram(ECG)electrodes are conductive pads applied to the skin to measure cardiac activity.Ag/AgCl electrodes are the commercial product which widely used to obtain ECGs.When monitoring the ECG in a hot spring,Ag/AgCl electrodes must be waterproofed;however,this is time-consuming,and the adhesive may tear the skin on removal.For solving the problem,we developed the carbon pencil lead(CPL)electrodes for use in hot springs.Both CPL and Ag/AgCl electrodes were connected to ECG100C’s cables.The Performance was evaluated in three conditions as following:hot spring water with and without bubble,and in cold water.In each environment,the procedure was followed by three different protocols that are recording from the dry condition,hot spring water immersion with and without movement,post hot spring water condition.Under dry and wet conditions,both electrodes can obtain the waveform of the ECG signal in which all PQRST waves were identifiable.Nevertheless,the signal quality of both types of electrodes was different in water immersion with and without movement.The overall morphology obtained by Ag/AgCl electrodes was unstable higher than that of CPL electrodes in immersion without movement condition.The CPL electrodes provided better ECG waveform quality compared to Ag/AgCl electrodes in which the ECG signal had high waveforms distortion in water immersion with movement condition.展开更多
This paper focuses on detecting diseased signals and arrhythmias classification into two classes:ventricular tachycardia and premature ventricular contraction.The sole purpose of the signal detection is used to determ...This paper focuses on detecting diseased signals and arrhythmias classification into two classes:ventricular tachycardia and premature ventricular contraction.The sole purpose of the signal detection is used to determine if a signal has been collected from a healthy or sick person.The proposed research approach presents a mathematical model for the signal detector based on calculating the instantaneous frequency(IF).Once a signal taken from a patient is detected,then the classifier takes that signal as input and classifies the target disease by predicting the class label.While applying the classifier,templates are designed separately for ventricular tachycardia and premature ventricular contraction.Similarities of a given signal with both the templates are computed in the spectral domain.The empirical analysis reveals precisions for the detector and the applied classifier are 100%and 77.27%,respectively.Moreover,instantaneous frequency analysis provides a benchmark that IF of a normal signal ranges from 0.8 to 1.1 Hz whereas IF range for ventricular tachycardia and premature ventricular contraction is 0.08–0.6 Hz.This indicates a serious loss of high-frequency contents in the spectrum,implying that the heart’s overall activity is slowed down.This study may help medical practitioners in detecting the heart disease type based on signal analysis.展开更多
This study proposes a hybridization of two efficient algorithm’s Multi-objective Ant Lion Optimizer Algorithm(MOALO)which is a multi-objective enhanced version of the Ant Lion Optimizer Algorithm(ALO)and the Genetic ...This study proposes a hybridization of two efficient algorithm’s Multi-objective Ant Lion Optimizer Algorithm(MOALO)which is a multi-objective enhanced version of the Ant Lion Optimizer Algorithm(ALO)and the Genetic Algorithm(GA).MOALO version has been employed to address those problems containing many objectives and an archive has been employed for retaining the non-dominated solutions.The uniqueness of the hybrid is that the operators like mutation and crossover of GA are employed in the archive to update the solutions and later those solutions go through the process of MOALO.A first-time hybrid of these algorithms is employed to solve multi-objective problems.The hybrid algorithm overcomes the limitation of ALO of getting caught in the local optimum and the requirement of more computational effort to converge GA.To evaluate the hybridized algorithm’s performance,a set of constrained,unconstrained test problems and engineering design problems were employed and compared with five well-known computational algorithms-MOALO,Multi-objective Crystal Structure Algorithm(MOCryStAl),Multi-objective Particle Swarm Optimization(MOPSO),Multi-objective Multiverse Optimization Algorithm(MOMVO),Multi-objective Salp Swarm Algorithm(MSSA).The outcomes of five performance metrics are statistically analyzed and the most efficient Pareto fronts comparison has been obtained.The proposed hybrid surpasses MOALO based on the results of hypervolume(HV),Spread,and Spacing.So primary objective of developing this hybrid approach has been achieved successfully.The proposed approach demonstrates superior performance on the test functions,showcasing robust convergence and comprehensive coverage that surpasses other existing algorithms.展开更多
Owing to technological developments,Medical image analysis has received considerable attention in the rapid detection and classification of diseases.The brain is an essential organ in humans.Brain tumors cause loss of...Owing to technological developments,Medical image analysis has received considerable attention in the rapid detection and classification of diseases.The brain is an essential organ in humans.Brain tumors cause loss of memory,vision,and name.In 2020,approximately 18,020 deaths occurred due to brain tumors.These cases can be minimized if a brain tumor is diagnosed at a very early stage.Computer vision researchers have introduced several techniques for brain tumor detection and classification.However,owing to many factors,this is still a challenging task.These challenges relate to the tumor size,the shape of a tumor,location of the tumor,selection of important features,among others.In this study,we proposed a framework for multimodal brain tumor classification using an ensemble of optimal deep learning features.In the proposed framework,initially,a database is normalized in the form of high-grade glioma(HGG)and low-grade glioma(LGG)patients and then two pre-trained deep learning models(ResNet50 and Densenet201)are chosen.The deep learning models were modified and trained using transfer learning.Subsequently,the enhanced ant colony optimization algorithm is proposed for best feature selection from both deep models.The selected features are fused using a serial-based approach and classified using a cubic support vector machine.The experimental process was conducted on the BraTs2019 dataset and achieved accuracies of 87.8%and 84.6%for HGG and LGG,respectively.The comparison is performed using several classification methods,and it shows the significance of our proposed technique.展开更多
The behavior and nature of attacks and threats to computer network systems have been evolving rapidly with the advances in computer security technology. At the same time however, computer criminals and other malicious...The behavior and nature of attacks and threats to computer network systems have been evolving rapidly with the advances in computer security technology. At the same time however, computer criminals and other malicious elements find ways and methods to thwart such protective measures and find techniques of penetrating such secure systems. Therefore adaptability, or the ability to learn and react to a consistently changing threat environment, is a key requirement for modern intrusion detection systems. In this paper we try to develop a novel metric to assess the performance of such intrusion detection systems under the influence of attacks. We propose a new metric called feedback reliability ratio for an intrusion detection system. We further try to modify and use the already available statistical Canberra distance metric and apply it to intrusion detection to quantify the dissimilarity between malicious elements and normal nodes in a network.展开更多
Breast cancer resistance protein(BCRP)is an important resistance protein that significantly impacts anticancer drug discovery,treatment,and rehabilitation.Early identification of BCRP substrates is quite a challenging...Breast cancer resistance protein(BCRP)is an important resistance protein that significantly impacts anticancer drug discovery,treatment,and rehabilitation.Early identification of BCRP substrates is quite a challenging task.This study aims to predict early substrate structure,which can help to optimize anticancer drug development and clinical diagnosis.For this study,a novel intelligent approach-based methodology is developed by modifying the ResNet101 model using transfer learning(TL)for automatic deep feature(DF)extraction followed by classification with linear discriminant analysis algorithm(TLRNDF-LDA).This study utilized structural fingerprints,which are exploited by DF contrary to conventional molecular descriptors.The proposed in silico model achieved an outstanding accuracy performance of 98.56%on test data compared to other state-of-the-art approaches using standard quality measures.Furthermore,the model’s efficacy is validated via a statistical analysisANOVAtest.It is demonstrated that the developedmodel can be used effectively for early prediction of the substrate structure.The pipeline of this study is flexible and can be extended for in vitro assessment efficacy of anticancer drug response,identification of BCRP functions in transport experiments,and prediction of prostate or lung cancer cell lines.展开更多
Alzheimer’s disease(AD)is a neurodevelopmental impairment that results in a person’s behavior,thinking,and memory loss.Themost common symptoms ofADare losingmemory and early aging.In addition to these,there are seve...Alzheimer’s disease(AD)is a neurodevelopmental impairment that results in a person’s behavior,thinking,and memory loss.Themost common symptoms ofADare losingmemory and early aging.In addition to these,there are several serious impacts ofAD.However,the impact ofADcanbemitigatedby early-stagedetection though it cannot be cured permanently.Early-stage detection is the most challenging task for controlling and mitigating the impact of AD.The study proposes a predictive model to detect AD in the initial phase based on machine learning and a deep learning approach to address the issue.To build a predictive model,open-source data was collected where five stages of images of AD were available as Cognitive Normal(CN),Early Mild Cognitive Impairment(EMCI),Mild Cognitive Impairment(MCI),Late Mild Cognitive Impairment(LMCI),and AD.Every stage of AD is considered as a class,and then the dataset was divided into three parts binary class,three class,and five class.In this research,we applied different preprocessing steps with augmentation techniques to efficiently identifyAD.It integrates a random oversampling technique to handle the imbalance problem from target classes,mitigating the model overfitting and biases.Then three machine learning classifiers,such as random forest(RF),K-Nearest neighbor(KNN),and support vector machine(SVM),and two deep learning methods,such as convolutional neuronal network(CNN)and artificial neural network(ANN)were applied on these datasets.After analyzing the performance of the used models and the datasets,it is found that CNN with binary class outperformed 88.20%accuracy.The result of the study indicates that the model is highly potential to detect AD in the initial phase.展开更多
With the incorporation of distributed energy systems in the electric grid,transactive energy market(TEM)has become popular in balancing the demand as well as supply adaptively over the grid.The classical grid can be u...With the incorporation of distributed energy systems in the electric grid,transactive energy market(TEM)has become popular in balancing the demand as well as supply adaptively over the grid.The classical grid can be updated to the smart grid by the integration of Information and Communication Technology(ICT)over the grids.The TEM allows the Peerto-Peer(P2P)energy trading in the grid that effectually connects the consumer and prosumer to trade energy among them.At the same time,there is a need to predict the load for effectual P2P energy trading and can be accomplished by the use of machine learning(DML)models.Though some of the short term load prediction techniques have existed in the literature,there is still essential to consider the intrinsic features,parameter optimization,etc.into account.In this aspect,this study devises new deep learning enabled short term load forecasting model for P2P energy trading(DLSTLF-P2P)in TEM.The proposed model involves the design of oppositional coyote optimization algorithm(OCOA)based feature selection technique in which the OCOA is derived by the integration of oppositional based learning(OBL)concept with COA for improved convergence rate.Moreover,deep belief networks(DBN)are employed for the prediction of load in the P2P energy trading systems.In order to additional improve the predictive performance of the DBN model,a hyperparameter optimizer is introduced using chicken swarm optimization(CSO)algorithm is applied for the optimal choice of DBN parameters to improve the predictive outcome.The simulation analysis of the proposed DLSTLF-P2P is validated using the UK Smart Meter dataset and the obtained outcomes demonstrate the superiority of the DLSTLF-P2P technique with the maximum training,testing,and validation accuracy of 90.17%,87.39%,and 87.86%.展开更多
An effective communication application necessitates the cancellation of Impulsive Noise(IN)from Orthogonal Frequency Division Multiplexing(OFDM),which is widely used for wireless applications due to its higher data ra...An effective communication application necessitates the cancellation of Impulsive Noise(IN)from Orthogonal Frequency Division Multiplexing(OFDM),which is widely used for wireless applications due to its higher data rate and greater spectral efficiency.The OFDM system is typically corrupted by Impulsive Noise,which is an unwanted short-duration pulse with random amplitude and duration.Impulsive noise is created by humans and has non-Gaussian characteristics,causing problems in communication systems such as high capacity loss and poor error rate performance.Several techniques have been introduced in the literature to solve this type of problem,but they still have many issues that affect the performance of the presented methods.As a result,developing a new hybridization-based method is critical for accurate method performance.In this paper,we present a hybrid of a state space adaptive filter and an information coding technique for cancelling impulsive noise from OFDM.The proposed method is also compared to Least Mean Square(LMS),Normalized Least Mean Square(NLMS),and Recursive Least Square(RLS)adaptive filters.It has also been tested using the binary phase-shift keyed(BPSK),four quadrature amplitude modulation(QAM),sixteen QAM,and thirty-two QAM modulation techniques.Bit error Rate(BER)simulations are used to evaluate system performance,and improved performance is obtained.Furthermore,the proposed method is more effective than recent methods.展开更多
Deep learning(DL)plays a critical role in processing and converting data into knowledge and decisions.DL technologies have been applied in a variety of applications,including image,video,and genome sequence analysis.I...Deep learning(DL)plays a critical role in processing and converting data into knowledge and decisions.DL technologies have been applied in a variety of applications,including image,video,and genome sequence analysis.In deep learning the most widely utilized architecture is Convolutional Neural Networks(CNN)are taught discriminatory traits in a supervised environment.In comparison to other classic neural networks,CNN makes use of a limited number of artificial neurons,therefore it is ideal for the recognition and processing of wheat gene sequences.Wheat is an essential crop of cereals for people around the world.Wheat Genotypes identification has an impact on the possible development of many countries in the agricultural sector.In quantitative genetics prediction of genetic values is a central issue.Wheat is an allohexaploid(AABBDD)with three distinct genomes.The sizes of the wheat genome are quite large compared to many other kinds and the availability of a diversity of genetic knowledge and normal structure at breeding lines of wheat,Therefore,genome sequence approaches based on techniques of Artificial Intelligence(AI)are necessary.This paper focuses on using the Wheat genome sequence will assist wheat producers in making better use of their genetic resources and managing genetic variation in their breeding program,as well as propose a novel model based on deep learning for offering a fundamental overview of genomic prediction theory and current constraints.In this paper,the hyperparameters of the network are optimized in the CNN to decrease the requirement for manual search and enhance network performance using a new proposed model built on an optimization algorithm and Convolutional Neural Networks(CNN).展开更多
Wireless Sensor Networks(WSN)play a vital role in several real-time applications ranging from military to civilian.Despite the benefits of WSN,energy efficiency becomes a major part of the challenging issue in WSN,whi...Wireless Sensor Networks(WSN)play a vital role in several real-time applications ranging from military to civilian.Despite the benefits of WSN,energy efficiency becomes a major part of the challenging issue in WSN,which necessitate proper load balancing amongst the clusters and serves a wider monitoring region.The clustering technique for WSN has several benefits:lower delay,higher energy efficiency,and collision avoidance.But clustering protocol has several challenges.In a large-scale network,cluster-based protocols mainly adapt multi-hop routing to save energy,leading to hot spot problems.A hot spot problem becomes a problem where a cluster node nearer to the base station(BS)tends to drain the energy much quicker than other nodes because of the need to implement more transmission.This article introduces a Jumping Spider Optimization Based Unequal Clustering Protocol for Mitigating Hotspot Problems(JSOUCP-MHP)in WSN.The JSO algorithm is stimulated by the characteristics of spiders naturally and mathematically modelled the hunting mechanism such as search,persecution,and jumping skills to attack prey.The presented JSOUCPMHP technique mainly resolves the hot spot issue for maximizing the network lifespan.The JSOUCP-MHP technique elects a proper set of cluster heads(CHs)using average residual energy(RE)to attain this.In addition,the JSOUCP-MHP technique determines the cluster sizes based on two measures,i.e.,RE and distance to BS(DBS),showing the novelty of the work.The proposed JSOUCP-MHP technique is examined under several experiments to ensure its supremacy.The comparison study shows the significance of the JSOUCPMHP technique over other models.展开更多
The Fourth Industrial Revolution (4IR) is transforming the way we live, learn, work, and relate to one another. However, there is still an awareness inadequacy of the 4IR among project managers and the society in Tanz...The Fourth Industrial Revolution (4IR) is transforming the way we live, learn, work, and relate to one another. However, there is still an awareness inadequacy of the 4IR among project managers and the society in Tanzania, thus low readiness to conceptualize, implement and manage 4IR-related projects in the country. This study aimed to assess the 4IR readiness of project managers in Tanzania. The assessment is made in the frame of 4 readiness dimensions: strategy and governance structure, technology awareness, human capital digital skills development, and social-economic impact. The research used a quantitative method with the diffusion of innovations theory perspective, and data were collected mainly through an online survey questionnaire. The survey aimed at answering the research question concerning the project managers’ readiness for the 4IR. The 50 valid samples were completed by project managers from various industries such as agriculture, finance, consulting, construction, education and training, government, healthcare, Information Technology, and manufacturing. Data were analysed using SPSS. The results revealed that despite the generally low awareness of 4IR, several project managers in Tanzania have some varying awareness of 4IR technologies such as artificial intelligence, Internet of Things (IoT), data analytics, blockchain, robotics, cryptocurrency, chatbots, drones, and other digital transformation platforms. The results also indicated that project managers in Tanzania had little extent in readiness to initiate, develop and implement 4IR products and services due to inadequate 4IR-related awareness, strategy and governance structure, human capital digital skills development, and social economic impact. Consequently, some recommendations are made in the frame of the four assessed readiness dimensions for improvement. The value of this research is mainly to provide the state of 4IR readiness of project managers and associated recommendations to policymakers, practitioners, academia, donors, business industry and youth in digital innovation. The study also contributes to the body of knowledge on 4IR, project management and digital transformation.展开更多
基金supported by Korea Evaluation Institute of Industrial Technology(KEIT)grant funded by the Korea Government(MOTIE)(RS-2022-00154720,Technology Innovation Program Development of next-generation power semiconductor based on Si-on-SiC structure)the National Research Foundation of Korea(NRF)by the Korea government(RS-2023-NR076826)Global-Learning&Academic Research Institution for Master's·PhD students,and Postdocs(LAMP)Program of the National Research Foundation of Korea(NRF)by the Ministry of Education(No.RS-2024-00443714).
文摘Improving device efficiency is fundamental for advancing energy harvesting technology,particularly in systems designed to convert light energy into electrical output.In our previous studies,we developed a basic structure light pressure electric generator(Basic-LPEG),which utilized a layered configuration of Ag/Pb(Zr,Ti)O_(3)(PZT)/Pt/GaAs to generate electricity based on light-induced pressure on the PZT.In this study,we sought to enhance the performance of this Basic-LPEG by introducing Ag nanoparticles/graphene oxide(AgNPs/GO)composite units(NP-LPEG),creating upgraded harvesting device.Specifically,by depositing the AgNPs/GO units twice onto the Basic-LPEG,we observed an increase in output voltage and current from 241 mV and 3.1μA to 310 mV and 9.3μA,respectively,under a solar simulator.The increase in electrical output directly correlated with the intensity of the light pressure impacting the PZT,as well as matched the Raman measurements,finite-difference time-domain simulations,and COMSOL Multiphysics Simulation.Experimental data revealed that the enhancement in electrical output was proportional to the number of hot spots generated between Ag nanoparticles,where the electric field experienced substantial amplification.These results underline the effectiveness of AgNPs/GO units in boosting the light-induced electric generation capacity,thereby providing a promising pathway for high-efficiency energy harvesting devices.
基金supported by National Key Research and Development Program of China(2019YFC0605300)the National Natural Science Foundation of China(61873299,61902022,61972028)+2 种基金Scientific and Technological Innovation Foundation of Shunde Graduate School,University of Science and Technology Beijing(BK21BF002)Macao Science and Technology Development Fund under Macao Funding Scheme for Key R&D Projects(0025/2019/AKP)Macao Science and Technology Development Fund(0015/2020/AMJ)。
文摘It is crucial to predict the outputs of a thickening system,including the underflow concentration(UC)and mud pressure,for optimal control of the process.The proliferation of industrial sensors and the availability of thickening-system data make this possible.However,the unique properties of thickening systems,such as the non-linearities,long-time delays,partially observed data,and continuous time evolution pose challenges on building data-driven predictive models.To address the above challenges,we establish an integrated,deep-learning,continuous time network structure that consists of a sequential encoder,a state decoder,and a derivative module to learn the deterministic state space model from thickening systems.Using a case study,we examine our methods with a tailing thickener manufactured by the FLSmidth installed with massive sensors and obtain extensive experimental results.The results demonstrate that the proposed continuous-time model with the sequential encoder achieves better prediction performances than the existing discrete-time models and reduces the negative effects from long time delays by extracting features from historical system trajectories.The proposed method also demonstrates outstanding performances for both short and long term prediction tasks with the two proposed derivative types.
基金supported in part by the Institute of Information and Communications Technology Planning and Evaluation(IITP)Grant by the Korean Government Ministry of Science and ICT(MSITArtificial Intelligence Innovation Hub)under Grant 2021-0-02068in part by the NationalResearch Foundation of Korea(NRF)Grant by theKorean Government(MSIT)under Grant NRF-2021R1I1A3060565.
文摘In the quest to minimize energy waste,the energy performance of buildings(EPB)has been a focus because building appliances,such as heating,ventilation,and air conditioning,consume the highest energy.Therefore,effective design and planning for estimating heating load(HL)and cooling load(CL)for energy saving have become paramount.In this vein,efforts have been made to predict the HL and CL using a univariate approach.However,this approach necessitates two models for learning HL and CL,requiring more computational time.Moreover,the one-dimensional(1D)convolutional neural network(CNN)has gained popularity due to its nominal computa-tional complexity,high performance,and low-cost hardware requirement.In this paper,we formulate the prediction as a multivariate regression problem in which the HL and CL are simultaneously predicted using the 1D CNN.Considering the building shape characteristics,one kernel size is adopted to create the receptive fields of the 1D CNN to extract the feature maps,a dense layer to interpret the maps,and an output layer with two neurons to predict the two real-valued responses,HL and CL.As the 1D data are not affected by excessive parameters,the pooling layer is not applied in this implementation.Besides,the use of pooling has been questioned by recent studies.The performance of the proposed model displays a comparative advantage over existing models in terms of the mean squared error(MSE).Thus,the proposed model is effective for EPB prediction because it reduces computational time and significantly lowers the MSE.
文摘This study investigated the role of Information and Communications Technology in an enhanced banking operation using Diamond Bank Plc, Imo State as a case study. The study was motivated by the fact that most industries, financial institutions rely on gathering, processing, analyzing, and providing information in order to meet the needs of customers. It was based on data primarily, collected from both the primary and secondary sources which seek to investigate role of Information and Communications Technology in the banking industry. This piece of work, through direct investigation, interviews and questionnaires used to examine the role of Information and Communication Technology, plays in the banking industries and how it has affected the employment generation in the industries. It was gathered that ICT has positively affected the bank, the employees and the customers. The result also shows the application has improved banking services, maintained high level of proficiency and efficiency, reduced the long time spent on queues and brought about increase in employment opportunities.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Ministry of Science and ICT(MSIT),Republic of Korea(1711185759).
文摘Governments worldwide have implemented non-pharmaceutical interventions(NPIs)to control the spread of coronavirus disease 2019(COVID-19),and it is crucial to accurately assess the effectiveness of such measures.Many studies have quantified the risk of infection transmission and used simulations to compare the risk before and after the implementation of NPIs to judge policies’effectiveness.However,the choice of metric used to quantify the risk can lead to different conclusions regarding the effectiveness of a policy.In this study,we analyze the correlation between different transmission-risk metrics,pedestrian environments,and types of infectious diseases using simulation-generated data.Our findings reveal conflicting results among five different metric types in specific environments.More specifically,we observe that,when the randomness of pedestrian trajectories in indoor spaces is low,the closeness centrality exhibits a higher correlation coefficient with infection-based metrics than with contact-based metrics.Furthermore,even within the same pedestrian environment,the likelihood of discrepancies between infection-based metrics and other metrics increases for infectious diseases with low transmission rates.These results highlight the variability in the measured effectiveness of NPIs depending on the chosen metric.To evaluate NPIs accurately,facility managers should consider the type of facility and infectious disease and not solely rely on a single metric.This study provides a simulation model as a tool for future research and improves the reliability of pedestrian-simulation-based NPI effectiveness analysis methods.
基金supported by the KIAT(Korea Institute for Advancement of Technology)grant funded by the Korea Government(MOTIE:Ministry of Trade Industry and Energy)(No.P0012724)the Soonchunhyang University Research Fund.
文摘Various techniques to diagnose eye diseases such as diabetic retinopathy(DR),glaucoma(GLC),and age-related macular degeneration(AMD),are possible through deep learning algorithms.A few recent studies have examined a couple of major diseases and compared them with data from healthy subjects.However,multiple major eye diseases,such as DR,GLC,and AMD,could not be detected simultaneously by computer-aided systems to date.There were just high-performance-outcome researches on a pair of healthy and eye-diseased group,besides of four categories of fundus image classification.To have a better knowledge of multi-categorical classification of fundus photographs,we used optimal residual deep neural networks and effective image preprocessing techniques,such as shrinking the region of interest,iso-luminance plane contrast-limited adaptive histogram equalization,and data augmentation.Applying these to the classification of three eye diseases from currently available public datasets,we achieved peak and average accuracies of 91.16%and 85.79%,respectively.The specificities for images from the eyes of healthy,GLC,AMD,and DR patients were 90.06%,99.63%,99.82%,and 91.90%,respectively.The better specificity performances may alert patient in an early stage of eye diseases to prevent vision loss.This study presents a possible occurrence of a multi-categorical deep neural network technique that can be deemed as a successful pilot study of classification for the three most-common eye diseases and can be used for future assistive devices in computer-aided clinical applications.
基金This work was supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.NRF-2021R1A2C1010362)and the Soonchunhyang University Research Fund.
文摘While the usage of digital ocular fundus image has been widespread in ophthalmology practice,the interpretation of the image has been still on the hands of the ophthalmologists which are quite costly.We explored a robust deep learning system that detects three major ocular diseases:diabetic retinopathy(DR),glaucoma(GLC),and age-related macular degeneration(AMD).The proposed method is composed of two steps.First,an initial quality evaluation in the classification system is proposed to filter out poorquality images to enhance its performance,a technique that has not been explored previously.Second,the transfer learning technique is used with various convolutional neural networks(CNN)models that automatically learn a thousand features in the digital retinal image,and are based on those features for diagnosing eye diseases.Comparison performance of many models is conducted to find the optimal model which fits with fundus classification.Among the different CNN models,DenseNet-201 outperforms others with an area under the receiver operating characteristic curve of 0.99.Furthermore,the corresponding specificities for healthy,DR,GLC,andAMDpatients are found to be 89.52%,96.69%,89.58%,and 100%,respectively.These results demonstrate that the proposed method can reduce the time-consumption by automatically diagnosing multiple eye diseases using computer-aided assistance tools.
基金This research was supported by X-mind Corps program of National Research Foundation of Korea(NRF)funded by the Ministry of Science,ICT(No.2019H1D8A1105622)and the Soonchunhyang University Research Fund.
文摘Object recognition and tracking are two of the most dynamic research sub-areas that belong to the field of Computer Vision.Computer vision is one of the most active research fields that lies at the intersection of deep learning and machine vision.This paper presents an efficient ensemble algorithm for the recognition and tracking of fixed shapemoving objects while accommodating the shift and scale invariances that the object may encounter.The first part uses the Maximum Average Correlation Height(MACH)filter for object recognition and determines the bounding box coordinates.In case the correlation based MACH filter fails,the algorithms switches to a much reliable but computationally complex feature based object recognition technique i.e.,affine scale invariant feature transform(ASIFT).ASIFT is used to accommodate object shift and scale object variations.ASIFT extracts certain features from the object of interest,providing invariance in up to six affine parameters,namely translation(two parameters),zoom,rotation and two camera axis orientations.However,in this paper,only the shift and scale invariances are used.The second part of the algorithm demonstrates the use of particle filters based Approximate Proximal Gradient(APG)technique to periodically update the coordinates of the object encapsulated in the bounding box.At the end,a comparison of the proposed algorithm with other stateof-the-art tracking algorithms has been presented,which demonstrates the effectiveness of the proposed algorithm with respect to the minimization of tracking errors.
基金Korea Institute for Advancement of Technology(KIAT)grant funded by the Korea Government(MOTIE)(P0012724,The Competency Development Program for Industry Specialist)and the Soonchunhyang University Research Fund.
文摘Electrocardiogram(ECG)electrodes are conductive pads applied to the skin to measure cardiac activity.Ag/AgCl electrodes are the commercial product which widely used to obtain ECGs.When monitoring the ECG in a hot spring,Ag/AgCl electrodes must be waterproofed;however,this is time-consuming,and the adhesive may tear the skin on removal.For solving the problem,we developed the carbon pencil lead(CPL)electrodes for use in hot springs.Both CPL and Ag/AgCl electrodes were connected to ECG100C’s cables.The Performance was evaluated in three conditions as following:hot spring water with and without bubble,and in cold water.In each environment,the procedure was followed by three different protocols that are recording from the dry condition,hot spring water immersion with and without movement,post hot spring water condition.Under dry and wet conditions,both electrodes can obtain the waveform of the ECG signal in which all PQRST waves were identifiable.Nevertheless,the signal quality of both types of electrodes was different in water immersion with and without movement.The overall morphology obtained by Ag/AgCl electrodes was unstable higher than that of CPL electrodes in immersion without movement condition.The CPL electrodes provided better ECG waveform quality compared to Ag/AgCl electrodes in which the ECG signal had high waveforms distortion in water immersion with movement condition.
基金This research was supported by the MSIT(Ministry of Science and ICT),Korea,under the ICAN(ICT Challenge and Advanced Network of HRD)program(IITP-2021-2020-0-01832)supervised by the IITP(Institute of Information&Communications Technology Planning&Evaluation)and the Soonchunhyang University Research Fund.
文摘This paper focuses on detecting diseased signals and arrhythmias classification into two classes:ventricular tachycardia and premature ventricular contraction.The sole purpose of the signal detection is used to determine if a signal has been collected from a healthy or sick person.The proposed research approach presents a mathematical model for the signal detector based on calculating the instantaneous frequency(IF).Once a signal taken from a patient is detected,then the classifier takes that signal as input and classifies the target disease by predicting the class label.While applying the classifier,templates are designed separately for ventricular tachycardia and premature ventricular contraction.Similarities of a given signal with both the templates are computed in the spectral domain.The empirical analysis reveals precisions for the detector and the applied classifier are 100%and 77.27%,respectively.Moreover,instantaneous frequency analysis provides a benchmark that IF of a normal signal ranges from 0.8 to 1.1 Hz whereas IF range for ventricular tachycardia and premature ventricular contraction is 0.08–0.6 Hz.This indicates a serious loss of high-frequency contents in the spectrum,implying that the heart’s overall activity is slowed down.This study may help medical practitioners in detecting the heart disease type based on signal analysis.
基金supported by the National Research Foundation of Korea(NRF)Grant funded by the Korea government(MSIT)(No.RS-2023-00218176)the Soonchunhyang University Research Fund.
文摘This study proposes a hybridization of two efficient algorithm’s Multi-objective Ant Lion Optimizer Algorithm(MOALO)which is a multi-objective enhanced version of the Ant Lion Optimizer Algorithm(ALO)and the Genetic Algorithm(GA).MOALO version has been employed to address those problems containing many objectives and an archive has been employed for retaining the non-dominated solutions.The uniqueness of the hybrid is that the operators like mutation and crossover of GA are employed in the archive to update the solutions and later those solutions go through the process of MOALO.A first-time hybrid of these algorithms is employed to solve multi-objective problems.The hybrid algorithm overcomes the limitation of ALO of getting caught in the local optimum and the requirement of more computational effort to converge GA.To evaluate the hybridized algorithm’s performance,a set of constrained,unconstrained test problems and engineering design problems were employed and compared with five well-known computational algorithms-MOALO,Multi-objective Crystal Structure Algorithm(MOCryStAl),Multi-objective Particle Swarm Optimization(MOPSO),Multi-objective Multiverse Optimization Algorithm(MOMVO),Multi-objective Salp Swarm Algorithm(MSSA).The outcomes of five performance metrics are statistically analyzed and the most efficient Pareto fronts comparison has been obtained.The proposed hybrid surpasses MOALO based on the results of hypervolume(HV),Spread,and Spacing.So primary objective of developing this hybrid approach has been achieved successfully.The proposed approach demonstrates superior performance on the test functions,showcasing robust convergence and comprehensive coverage that surpasses other existing algorithms.
基金This study was supported by the grants of the Korea Health Technology R&D Project through the Korea Health Industry Development Institute(KHIDI),funded by the Ministry of Health&Welfare(HI18C1216)the grant of the National Research Foundation of Korea(NRF-2020R1I1A1A01074256)the Soonchunhyang University Research Fund.
文摘Owing to technological developments,Medical image analysis has received considerable attention in the rapid detection and classification of diseases.The brain is an essential organ in humans.Brain tumors cause loss of memory,vision,and name.In 2020,approximately 18,020 deaths occurred due to brain tumors.These cases can be minimized if a brain tumor is diagnosed at a very early stage.Computer vision researchers have introduced several techniques for brain tumor detection and classification.However,owing to many factors,this is still a challenging task.These challenges relate to the tumor size,the shape of a tumor,location of the tumor,selection of important features,among others.In this study,we proposed a framework for multimodal brain tumor classification using an ensemble of optimal deep learning features.In the proposed framework,initially,a database is normalized in the form of high-grade glioma(HGG)and low-grade glioma(LGG)patients and then two pre-trained deep learning models(ResNet50 and Densenet201)are chosen.The deep learning models were modified and trained using transfer learning.Subsequently,the enhanced ant colony optimization algorithm is proposed for best feature selection from both deep models.The selected features are fused using a serial-based approach and classified using a cubic support vector machine.The experimental process was conducted on the BraTs2019 dataset and achieved accuracies of 87.8%and 84.6%for HGG and LGG,respectively.The comparison is performed using several classification methods,and it shows the significance of our proposed technique.
文摘The behavior and nature of attacks and threats to computer network systems have been evolving rapidly with the advances in computer security technology. At the same time however, computer criminals and other malicious elements find ways and methods to thwart such protective measures and find techniques of penetrating such secure systems. Therefore adaptability, or the ability to learn and react to a consistently changing threat environment, is a key requirement for modern intrusion detection systems. In this paper we try to develop a novel metric to assess the performance of such intrusion detection systems under the influence of attacks. We propose a new metric called feedback reliability ratio for an intrusion detection system. We further try to modify and use the already available statistical Canberra distance metric and apply it to intrusion detection to quantify the dissimilarity between malicious elements and normal nodes in a network.
基金supported by the BK21 FOUR Program(FosteringOutstanding Universities for Research,5199991714138)funded by the Ministry of Education(MOE,Korea)and the National Research Foundation of Korea(NRF).
文摘Breast cancer resistance protein(BCRP)is an important resistance protein that significantly impacts anticancer drug discovery,treatment,and rehabilitation.Early identification of BCRP substrates is quite a challenging task.This study aims to predict early substrate structure,which can help to optimize anticancer drug development and clinical diagnosis.For this study,a novel intelligent approach-based methodology is developed by modifying the ResNet101 model using transfer learning(TL)for automatic deep feature(DF)extraction followed by classification with linear discriminant analysis algorithm(TLRNDF-LDA).This study utilized structural fingerprints,which are exploited by DF contrary to conventional molecular descriptors.The proposed in silico model achieved an outstanding accuracy performance of 98.56%on test data compared to other state-of-the-art approaches using standard quality measures.Furthermore,the model’s efficacy is validated via a statistical analysisANOVAtest.It is demonstrated that the developedmodel can be used effectively for early prediction of the substrate structure.The pipeline of this study is flexible and can be extended for in vitro assessment efficacy of anticancer drug response,identification of BCRP functions in transport experiments,and prediction of prostate or lung cancer cell lines.
基金funded in part by the Natural Sciences and Engineering Research Council of Canada(NSERC)through Project Number:IFP22UQU4170008DSR0056.
文摘Alzheimer’s disease(AD)is a neurodevelopmental impairment that results in a person’s behavior,thinking,and memory loss.Themost common symptoms ofADare losingmemory and early aging.In addition to these,there are several serious impacts ofAD.However,the impact ofADcanbemitigatedby early-stagedetection though it cannot be cured permanently.Early-stage detection is the most challenging task for controlling and mitigating the impact of AD.The study proposes a predictive model to detect AD in the initial phase based on machine learning and a deep learning approach to address the issue.To build a predictive model,open-source data was collected where five stages of images of AD were available as Cognitive Normal(CN),Early Mild Cognitive Impairment(EMCI),Mild Cognitive Impairment(MCI),Late Mild Cognitive Impairment(LMCI),and AD.Every stage of AD is considered as a class,and then the dataset was divided into three parts binary class,three class,and five class.In this research,we applied different preprocessing steps with augmentation techniques to efficiently identifyAD.It integrates a random oversampling technique to handle the imbalance problem from target classes,mitigating the model overfitting and biases.Then three machine learning classifiers,such as random forest(RF),K-Nearest neighbor(KNN),and support vector machine(SVM),and two deep learning methods,such as convolutional neuronal network(CNN)and artificial neural network(ANN)were applied on these datasets.After analyzing the performance of the used models and the datasets,it is found that CNN with binary class outperformed 88.20%accuracy.The result of the study indicates that the model is highly potential to detect AD in the initial phase.
基金This research was supported by Korea Institute for Advancement of Technology(KIAT)grant funded by the Korea Government(MOTIE)(P0012724,The Competency Development Program for Industry Specialist)and the Soonchunhyang University Research Fund.
文摘With the incorporation of distributed energy systems in the electric grid,transactive energy market(TEM)has become popular in balancing the demand as well as supply adaptively over the grid.The classical grid can be updated to the smart grid by the integration of Information and Communication Technology(ICT)over the grids.The TEM allows the Peerto-Peer(P2P)energy trading in the grid that effectually connects the consumer and prosumer to trade energy among them.At the same time,there is a need to predict the load for effectual P2P energy trading and can be accomplished by the use of machine learning(DML)models.Though some of the short term load prediction techniques have existed in the literature,there is still essential to consider the intrinsic features,parameter optimization,etc.into account.In this aspect,this study devises new deep learning enabled short term load forecasting model for P2P energy trading(DLSTLF-P2P)in TEM.The proposed model involves the design of oppositional coyote optimization algorithm(OCOA)based feature selection technique in which the OCOA is derived by the integration of oppositional based learning(OBL)concept with COA for improved convergence rate.Moreover,deep belief networks(DBN)are employed for the prediction of load in the P2P energy trading systems.In order to additional improve the predictive performance of the DBN model,a hyperparameter optimizer is introduced using chicken swarm optimization(CSO)algorithm is applied for the optimal choice of DBN parameters to improve the predictive outcome.The simulation analysis of the proposed DLSTLF-P2P is validated using the UK Smart Meter dataset and the obtained outcomes demonstrate the superiority of the DLSTLF-P2P technique with the maximum training,testing,and validation accuracy of 90.17%,87.39%,and 87.86%.
基金This research was supported by the MSIT(Ministry of Science and ICT),Koreaunder the ICAN(ICT Challenge and Advanced Network of HRD)program(IITP-2022-2020-0-01832)supervised by the IITP(Institute of Information&Communications Technology Planning&Evaluation)the Soonchunhyang University Research Fund。
文摘An effective communication application necessitates the cancellation of Impulsive Noise(IN)from Orthogonal Frequency Division Multiplexing(OFDM),which is widely used for wireless applications due to its higher data rate and greater spectral efficiency.The OFDM system is typically corrupted by Impulsive Noise,which is an unwanted short-duration pulse with random amplitude and duration.Impulsive noise is created by humans and has non-Gaussian characteristics,causing problems in communication systems such as high capacity loss and poor error rate performance.Several techniques have been introduced in the literature to solve this type of problem,but they still have many issues that affect the performance of the presented methods.As a result,developing a new hybridization-based method is critical for accurate method performance.In this paper,we present a hybrid of a state space adaptive filter and an information coding technique for cancelling impulsive noise from OFDM.The proposed method is also compared to Least Mean Square(LMS),Normalized Least Mean Square(NLMS),and Recursive Least Square(RLS)adaptive filters.It has also been tested using the binary phase-shift keyed(BPSK),four quadrature amplitude modulation(QAM),sixteen QAM,and thirty-two QAM modulation techniques.Bit error Rate(BER)simulations are used to evaluate system performance,and improved performance is obtained.Furthermore,the proposed method is more effective than recent methods.
基金This research was supported by Korea Institute for Advancement of Technology(KIAT)grant funded by the Korea Government(MOTIE)(P0012724,The Competency Development Program for Industry Specialist)the National Research Foundation of Korea(NRF)grant funded by theKorea government(MSIT)(No.RS-2023-00218176)the Soonchunhyang University Research Fund.
文摘Deep learning(DL)plays a critical role in processing and converting data into knowledge and decisions.DL technologies have been applied in a variety of applications,including image,video,and genome sequence analysis.In deep learning the most widely utilized architecture is Convolutional Neural Networks(CNN)are taught discriminatory traits in a supervised environment.In comparison to other classic neural networks,CNN makes use of a limited number of artificial neurons,therefore it is ideal for the recognition and processing of wheat gene sequences.Wheat is an essential crop of cereals for people around the world.Wheat Genotypes identification has an impact on the possible development of many countries in the agricultural sector.In quantitative genetics prediction of genetic values is a central issue.Wheat is an allohexaploid(AABBDD)with three distinct genomes.The sizes of the wheat genome are quite large compared to many other kinds and the availability of a diversity of genetic knowledge and normal structure at breeding lines of wheat,Therefore,genome sequence approaches based on techniques of Artificial Intelligence(AI)are necessary.This paper focuses on using the Wheat genome sequence will assist wheat producers in making better use of their genetic resources and managing genetic variation in their breeding program,as well as propose a novel model based on deep learning for offering a fundamental overview of genomic prediction theory and current constraints.In this paper,the hyperparameters of the network are optimized in the CNN to decrease the requirement for manual search and enhance network performance using a new proposed model built on an optimization algorithm and Convolutional Neural Networks(CNN).
基金This research was supported by the MSIT(Ministry of Science and ICT)Korea,under the ICAN(ICT Challenge and Advanced Network of HRD)program(IITP-2022-2020-0-01832)supervised by the IITP(Institute of Information&Communications Technology Planning&Evaluation)and the Korea Technology and Information Promotion Agency(TIPA)for SMEs grant funded by the Korea government(Ministry of SMEs and Startups)(No.S3271954)and the Soonchunhyang University Research Fund。
文摘Wireless Sensor Networks(WSN)play a vital role in several real-time applications ranging from military to civilian.Despite the benefits of WSN,energy efficiency becomes a major part of the challenging issue in WSN,which necessitate proper load balancing amongst the clusters and serves a wider monitoring region.The clustering technique for WSN has several benefits:lower delay,higher energy efficiency,and collision avoidance.But clustering protocol has several challenges.In a large-scale network,cluster-based protocols mainly adapt multi-hop routing to save energy,leading to hot spot problems.A hot spot problem becomes a problem where a cluster node nearer to the base station(BS)tends to drain the energy much quicker than other nodes because of the need to implement more transmission.This article introduces a Jumping Spider Optimization Based Unequal Clustering Protocol for Mitigating Hotspot Problems(JSOUCP-MHP)in WSN.The JSO algorithm is stimulated by the characteristics of spiders naturally and mathematically modelled the hunting mechanism such as search,persecution,and jumping skills to attack prey.The presented JSOUCPMHP technique mainly resolves the hot spot issue for maximizing the network lifespan.The JSOUCP-MHP technique elects a proper set of cluster heads(CHs)using average residual energy(RE)to attain this.In addition,the JSOUCP-MHP technique determines the cluster sizes based on two measures,i.e.,RE and distance to BS(DBS),showing the novelty of the work.The proposed JSOUCP-MHP technique is examined under several experiments to ensure its supremacy.The comparison study shows the significance of the JSOUCPMHP technique over other models.
文摘The Fourth Industrial Revolution (4IR) is transforming the way we live, learn, work, and relate to one another. However, there is still an awareness inadequacy of the 4IR among project managers and the society in Tanzania, thus low readiness to conceptualize, implement and manage 4IR-related projects in the country. This study aimed to assess the 4IR readiness of project managers in Tanzania. The assessment is made in the frame of 4 readiness dimensions: strategy and governance structure, technology awareness, human capital digital skills development, and social-economic impact. The research used a quantitative method with the diffusion of innovations theory perspective, and data were collected mainly through an online survey questionnaire. The survey aimed at answering the research question concerning the project managers’ readiness for the 4IR. The 50 valid samples were completed by project managers from various industries such as agriculture, finance, consulting, construction, education and training, government, healthcare, Information Technology, and manufacturing. Data were analysed using SPSS. The results revealed that despite the generally low awareness of 4IR, several project managers in Tanzania have some varying awareness of 4IR technologies such as artificial intelligence, Internet of Things (IoT), data analytics, blockchain, robotics, cryptocurrency, chatbots, drones, and other digital transformation platforms. The results also indicated that project managers in Tanzania had little extent in readiness to initiate, develop and implement 4IR products and services due to inadequate 4IR-related awareness, strategy and governance structure, human capital digital skills development, and social economic impact. Consequently, some recommendations are made in the frame of the four assessed readiness dimensions for improvement. The value of this research is mainly to provide the state of 4IR readiness of project managers and associated recommendations to policymakers, practitioners, academia, donors, business industry and youth in digital innovation. The study also contributes to the body of knowledge on 4IR, project management and digital transformation.
