Achieving high-energy density remains a key objective for advanced energy storage systems.However,challenges,such as poor cathode conductivity,anode dendrite formation,polysulfide shuttling,and electrolyte degradation...Achieving high-energy density remains a key objective for advanced energy storage systems.However,challenges,such as poor cathode conductivity,anode dendrite formation,polysulfide shuttling,and electrolyte degradation,continue to limit performance and stability.Molecular and ionic dipole interactions have emerged as an effective strategy to address these issues by regulating ionic transport,modulating solvation structures,optimizing interfacial chemistry,and enhancing charge transfer kinetics.These interactions also stabilize electrode interfaces,suppress side reactions,and mitigate anode corrosion,collectively improving the durability of high-energy batteries.A deeper understanding of these mechanisms is essential to guide the design of next-generation battery materials.Herein,this review summarizes the development,classification,and advantages of dipole interactions in high-energy batteries.The roles of dipoles,including facilitating ion transport,controlling solvation dynamics,stabilizing the electric double layer,optimizing solid electrolyte interphase and cathode–electrolyte interface layers,and inhibiting parasitic reactions—are comprehensively discussed.Finally,perspectives on future research directions are proposed to advance dipole-enabled strategies for high-performance energy storage.This review aims to provide insights into the rational design of dipole-interactive systems and promote the progress of electrochemical energy storage technologies.展开更多
Rechargeable magnesium batteries are promising alternatives to traditional lithium batteries because of the high abundance of Mg compounds in earth crust,their low toxicity,and possible favorable properties as electro...Rechargeable magnesium batteries are promising alternatives to traditional lithium batteries because of the high abundance of Mg compounds in earth crust,their low toxicity,and possible favorable properties as electrodes'material.However,Mg metal anodes face several challenges,notably the natively existence of an inactive oxide layer on their surfaces,which reduces their effectiveness.Additionally,interactions of Mg electrodes with electrolyte solutions'components can lead to the formation of insulating surface layers,that can fully block them for ions transport.This review addresses these issues by focusing on surface treatments strategies to enhance electrochemical performance of Mg anodes.It highlights chemical and physical modification techniques to prevent oxidation and inactive-layers formation,as well as their practical implications for MIBs.We also examined the impact of Mg anodes'surface engineering on their electrochemical reversibility and cycling efficiency.Finally,future research directions to improve the performance and commercial viability of magnesium anodes and advance development of high-capacity,safe,and cost-effective energy storage systems based on magnesium electrochemistry are discussed.展开更多
Aluminum(Al)exhibits excellent electrical conductivity,mechanical ductility,and good chemical compatibility with high-ionic-conductivity electrolytes.This makes it more suitable as an anode material for all-solid-stat...Aluminum(Al)exhibits excellent electrical conductivity,mechanical ductility,and good chemical compatibility with high-ionic-conductivity electrolytes.This makes it more suitable as an anode material for all-solid-state lithium batteries(ASSLBs)compared to the overly reactive metallic lithium anode and the mechanically weak silicon anode.This study finds that the pre-lithiated Al anode demonstrates outstanding interfacial stability with the Li_6PS_5Cl(LPSCl)electrolyte,maintaining stable cycling for over 1200 h under conditions of deep charge-discharge.This paper combines the pre-lithiated Al anode with a high-nickel cathode,LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2),paired with the highly ionic conductive LPSCl electrolyte,to design an ASSLB with high energy density and stability.Using anode pre-lithiation techniques,along with dual-reinforcement technology between the electrolyte and the cathode active material,the ASSLB achieves stable cycling for 1000 cycles at a 0.2C rate,with a capacity retention rate of up to 82.2%.At a critical negative-to-positive ratio of 1.1,the battery's specific energy reaches up to 375 Wh kg^(-1),and it maintains over 85.9%of its capacity after 100 charge-discharge cycles.This work provides a new approach and an excellent solution for developing low-cost,high-stability all-solid-state batteries.展开更多
Colloidal quantum dots(CQDs)are promising semiconducting materials,which can be used as a photoactive layer in various optoelectronic applications,because of their size-tunable bandgap energy,solution processability,a...Colloidal quantum dots(CQDs)are promising semiconducting materials,which can be used as a photoactive layer in various optoelectronic applications,because of their size-tunable bandgap energy,solution processability,and excellent optical and optoelectronic properties.In particular,these features have generated great interest in the development of CQD solar cells and led to a rapid increase in their power conversion efficiency.These improvements were enabled by many innovative approaches in terms of CQD’s surface chemistry and device architecture optimizations.In this review,a critical overview of the research progress in CQD solar cells is presented with a focus on the strategies adopted for achieving record efficiency in CQD solar cells.These strategies include the use of organic/inorganic surface ligands,pre-and post-treatment of CQDs,and solid-state/solution-phase ligand exchange.Additionally,we provide an understanding of the research history to inspire the rational design of next-generation CQD optoelectronic devices,such as solar cells,light-emitting diodes,and photodetectors.Recent research on the development of infrared CQD solar cells as complementary platforms to other solar cell technologies is also critically discussed to provide another perspective on CQD technologies.展开更多
Chemical leaching of coals would be required to produce cleaner coals for some special applications where physical benefi-ciation may not be effective enough.This would also help in recovering Li and rare earth metals...Chemical leaching of coals would be required to produce cleaner coals for some special applications where physical benefi-ciation may not be effective enough.This would also help in recovering Li and rare earth metals besides in the sequestration of CO_(2).About 20 Indian coals having complexly distributed moderate to high ash contents were sequentially treated with various alkali–acid such as NaOH-HCl,HF,HCl,HCl-HF,and NaOH-HCl-HF leaching.This aimed to establish and design the best stepwise sequential process for the highest degree of demineralisation through a chemical leaching process.Kinetics and process intensification studies were carried out.More than 80%demineralisation of Madhaipur and Neemcha coals was observed using the best sequential treatment designed presently.The repeated stepwise treatment of the alkali and the acid was also studied,which was found to significantly enhance the degree of demineralisation of coals.The integrated process of alkali–acid leaching followed by solvent extraction(Organo-refining)and vice versa of the treated coal was also studied for producing cleaner coals.展开更多
Aqueous zinc-ion batteries(AZIBs)have garnered considerable attention as promising post-lithium energy storage technologies owing to their intrinsic safety,cost-effectiveness,and competitive gravimetric energy density...Aqueous zinc-ion batteries(AZIBs)have garnered considerable attention as promising post-lithium energy storage technologies owing to their intrinsic safety,cost-effectiveness,and competitive gravimetric energy density.However,their practical commercialization is hindered by critical challenges on the anode side,including dendrite growth and parasitic reactions at the anode/electrolyte interface.Recent studies highlight that rational electrolyte structure engineering offers an effective route to mitigate these issues and strengthen the electrochemical performance of the zinc metal anode.In this review,we systematically summarize state-of-the-art strategies for electrolyte optimization,with a particular focus on the zinc salts regulation,electrolyte additives,and the construction of novel electrolytes,while elucidating the underlying design principles.We further discuss the key structure–property relationships governing electrolyte behavior to provide guidance for the development of next-generation electrolytes.Finally,future perspectives on advanced electrolyte design are proposed.This review aims to serve as a comprehensive reference for researchers exploring high-performance electrolyte engineering in AZIBs.展开更多
Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utili...Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.展开更多
Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly aff...Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly affect the photophysical properties of QDs,the influence on photoelectrochemical hydrogen production is not well understood.Herein,we present the defect engineering of CISe QDs for efficient solar-energy conversion.Lewis acid–base reactions between metal halide–oleylamine complexes and oleylammonium selenocarbamate are modulated to achieve CISe QDs with the controlled amount of Cu vacancies without changing their morphology.Among them,CISe QDs with In/Cu=1.55 show the most outstanding photoelectrochemical hydrogen generation with excellent photocurrent density of up to 10.7 mA cm-2(at 0.6 VRHE),attributed to the suitable electronic band structures and enhanced carrier concentrations/lifetimes of the QDs.The proposed method,which can effectively control the defects in heavy-metal-free ternary QDs,offers a deeper understanding of the effects of the defects and provides a practical approach to enhance photoelectrochemical hydrogen generation.展开更多
A method combining the immersed boundary technique and a multi- relaxation-time （MRT） lattice Boltzmann flux solver （LBFS） is presented for numerical simulation of incompressible flows over circular and elliptic c...A method combining the immersed boundary technique and a multi- relaxation-time （MRT） lattice Boltzmann flux solver （LBFS） is presented for numerical simulation of incompressible flows over circular and elliptic cylinders and NACA 0012 Airfoil. The method uses a simple Cartesian mesh to simulate flows past immersed complicated bodies. With the Chapman-Enskog expansion analysis, a transform is performed between the Navier-Stokes and lattice Boltzmann equations （LBEs）. The LBFS is used to discretize the macroscopic differential equations with a finite volume method and evaluate the interface fluxes through local reconstruction of the lattice Boltzmann solution. The immersed boundary technique is used to correct the intermediate velocity around the solid boundary to satisfy the no-slip boundary condition. Agreement of simulation results with the data found in the literature shows reliability of the proposed method in simulating laminar flows on a Cartesian mesh.展开更多
For efficient colloidal quantum dot(CQD)solar cells(CQD-SCs),thiol-passivated p-type CQDs are generally used as a hole-transporting material(HTM);however,there are issues with the control of optoelectrical properties,...For efficient colloidal quantum dot(CQD)solar cells(CQD-SCs),thiol-passivated p-type CQDs are generally used as a hole-transporting material(HTM);however,there are issues with the control of optoelectrical properties,low thiol passivation rate,and poor morphology with a power conversion efficiency(PCE)of approximately 11%.Although polymeric HTMs have been introduced to address these issues,maximizing efficiency and achieving green-solvent processability and thermal stability for commercialization is necessary.Here,we synthesize a novel benzodifuran(BDF)-based HTM(asy-ranPBTBDF)showing an electron-deficient state,low steric hindrance,and low planarity compared to those of a typical benzodithiophene(BDT)-based HTM(asy-ranPBTBDT).BDF properties lead to deep high occupied molecular orbital(HOMO)levels,closeπ-πstacking,excellent solubility,and amorphous properties related to efficiency,green-solvent processability,and thermal stability.With these benefits,the asy-ranPBTBDF-based CQD-SC showed enhanced open-circuit voltage(Voc)(0.65 V)and PCE(13.29%)compared to those of the asy-ranPBTBDT-based device(0.63 V and 12.22%)in toxic processes with chlorobenzene.The asy-ranPBTBDF-based CQD-SC showed a PCE of 12.51%in a green-solvent process with 2-methylanisole and improved thermal stability at 80℃(83.8%retaining after 24 h)owing to less lateral crystallization than the asy-ranPBTBDT-based device(60.8%retaining after 24 h).展开更多
The Janus MoSSe and alloy MoS_(x)Se_((1-x)),belonging to the family of two-dimensional(2D)transition metal dichalcogenides(TMDs),have gained significant attention for their potential applications in nanotechnology.The...The Janus MoSSe and alloy MoS_(x)Se_((1-x)),belonging to the family of two-dimensional(2D)transition metal dichalcogenides(TMDs),have gained significant attention for their potential applications in nanotechnology.The unique asymmetric structure of Janus MoSSe provides intriguing possibilities for tailored applications.The alloy MoS_(x)Se_((1-x))offers a tunable composition,allowing for the fine-tuning of the properties to meet specific requirements.These materials exhibit remarkable mechanical,electrical,and optical properties,including a tunable band gap,high absorption coefficient,and photoconductivity.The vibrational and magnetic properties also make it a promising candidate for nanoscale sensing and magnetic storage applications.Properties of these materials can be precisely controlled through different approaches such as size-dependent properties,phase engineering,doping,alloying,defect and vacancy engineering,intercalation,morphology,and heterojunction or hybridisation.Various synthesis methods for 2D Janus MoSSe and alloy MoS_(x)Se_((1-x))are discussed,including hydro/solvothermal,chemical vapour transport,chemical vapour deposition,physical vapour depositio,and other approaches.The review also presents the latest advancements in Janus and alloy MoSSe-based applications,such as chemical and gas sensors,surface-enhanced Raman spectroscopy,field emission,and energy storage.Moreover,the review highlights the challenges and future directions in the research of these materials,including the need for improved synthesis methods,understanding of their stability,and exploration of new applications.Despite the early stages of research,both the MoSSe-based materials have shown significant potential in various fields,and this review provides valuable insights for researchers and engineers interested in exploring its potential.展开更多
Non-thermal plasma has emerged as an effective treatment system against the latest class of highly recalcitrant and toxic environmental pollutants termed emerging contaminants(ECs).In the present work,a detailed exper...Non-thermal plasma has emerged as an effective treatment system against the latest class of highly recalcitrant and toxic environmental pollutants termed emerging contaminants(ECs).In the present work,a detailed experimental study is carried out to evaluate the efficacy of a non-thermal plasma jet with two dyes,Rd.B and Met.Blue,as model contaminants.The plasma jet provided a complete dye decoloration in 30 min with an applied voltage of 6.5 kV_(p-p).·OH,having the highest oxidation potential,acts as the main reactive species,which with direct action on contaminants also acts indirectly by getting converted into H_(2)O_(2)and O_(3).Further,the effect of critical operational parameters viz,sample pH,applied voltage(4.5–6.5 kV_(p-p)),conductivity(5–20 mS cm^(-1)),and sample distance on plasma treatment efficacy was also examined.Out of all the assessed parameters,the applied voltage and sample conductivity was found to be the most significant operating parameters.A high voltage and low conductivity favored the dye decoloration,while the pH effect was not that significant.To understand the influence of plasma discharge gas on treatment efficacy,all the experiments are conducted with argon and helium gases under the fixed geometrical configuration.Both the gases provided a similar dye decoloration efficiency.The DBD plasma system with complete dye removal also rendered maximum mineralization of 73%for Rd.B,and 60%for Met.Blue.Finally,the system's efficiency against the actual ECs(four pharmaceutical compounds,viz,metformin,atenolol,acetaminophen,and ranitidine)and microbial contaminant(E.coli)was also tested.The system showed effectivity in the complete removal of targeted pharmaceuticals and a log2.5 E.coli reduction.The present systematic characterization of dye degradation could be of interest to large communities working towards commercializing plasma treatment systems.展开更多
On the Large Helical Device （LHD） where nested magnetic surfaces are surrounded by the ergodic field layer, edge transport barrier （ETB） was produced in neutral-beam-injection （NBI） heated plasmas through transi...On the Large Helical Device （LHD） where nested magnetic surfaces are surrounded by the ergodic field layer, edge transport barrier （ETB） was produced in neutral-beam-injection （NBI） heated plasmas through transition and non-transition processes. The former case is the ETB formation by L-Htransition, where characteristics of L-H transition observed in a tokamak plasma are clearly recognized. The confinement improvement is the modest （- 10%）, compared with the ISS95 international stellarator scaling. The threshold power for the transition is comparable or slightly lower than the ITER scaling law established by tokamaks and compact tori. The ETB is formed inside the ergodic field layer of the vacuum field. The ETB formation destabilizes edge coherent modes such as m/n = 1/1, 2/3 and 1/2, of which rational surfaces are in the magnetic hill. The formed ETB is partially and transiently destroyed by these coherent edge MHD modes and edge localized modes （ELMs） typically observed in Ha signals. The latter ETB is observed in a plasma with large reversed NBI-driven current more than 100 kA at Bt = 1 T. In these plasmas, the edge magnetic shear is enhanced by the current and the rotational transform in the core region is expected to be appreciably reduced. Thus reduced rotational transform in the plasma central region will enhance outward heat and particle fluxes toward ergodic edge layer. The ETB with steep electron temperature gradient up to - 5 keV/m is formed by blocking enhanced outward heat flux.展开更多
We study the nonlinear coupling of kinetic Alfvén waves with ion acoustic waves applicable to the Earth’s radiation belt and near-Sun streamer belt solar wind using dynamical equations in the form of modified Za...We study the nonlinear coupling of kinetic Alfvén waves with ion acoustic waves applicable to the Earth’s radiation belt and near-Sun streamer belt solar wind using dynamical equations in the form of modified Zakharov systems.Numerical simulations show the formation of magnetic field filamentary structures associated with density humps and dips which become turbulent at later times,redistributing the energy to higher wavenumbers.The magnetic power spectra exhibit an inertial range Kolmogorov-like spectral index value of-5/3 for k_(⊥)ρ_(i)<1 followed by a steeper dissipation range spectra with indices~-3 for the radiation belt case and~-4 for the nearSun streamer belt solar wind case,here k_(⊥)andρ_(i)represent the wavevector component perpendicular to the background magnetic field and the ion thermal gyroradius,respectively.Applying quasilinear theory in terms of the Fokker-Planck equation in the region of wavenumber turbulent spectra,we find the particle distribution function flattening in the superthermal tail population which is the signature of particle energization and plasma heating.展开更多
A disruptive approach to a fundamental process has been applied in a biomass combustion device with two variable speed fans to supply air for gasification and another for combustion processes,separately.Besides,the pr...A disruptive approach to a fundamental process has been applied in a biomass combustion device with two variable speed fans to supply air for gasification and another for combustion processes,separately.Besides,the preheating of secondary air,required for combustion process was also ensured through annulus chamber before being fed into the combustion chamber.The turbulent flow and homogenous mixing were also ensured by controlling the flow rate resulting in the reduced emissions of carbon monoxide(CO)and fine particulate matter(PM 2.5,particulate matter having aerodynamic diameter<2.5 micron).The design approach applied here has also ensured the homogeneous mixing of preheated air with the volatiles,resulted in cleaner combustion.This arrangement has led to the emissions of PM2.5 and CO much better than those of the earlier cookstove models,and very close to that of a liquefied petroleum gas(LPG)stove.Further,the comparative analysis based on the modified star rating of total 15(14 are biomass and another LPG)cookstove models tested using the same standard methodology has been done and presented in this study.Based on the star rating,the performance of the LPG stove was found to be best and assigned as a 5-star product followed by the IITD model(4-star),while the other 13 models got different ratings starting from 1-star to 3-star,respectively.Also,the thermal performance of the IITD cookstove model is found to be the highest,while the emission characteristics are found to be the least among all biomass cookstove models,presented here.展开更多
TiO_(2)-ZnO nanocomposites were synthesized by varying Ti:Zn molar ratio from 1:0.1(TZ-1:0.1)to 1:1(TZ-1:1).With increase in Zn content,from TZ-1:0.1 to TZ-1:0.2,anatase transformed to rutile phase.TZ-1:0.3,which cont...TiO_(2)-ZnO nanocomposites were synthesized by varying Ti:Zn molar ratio from 1:0.1(TZ-1:0.1)to 1:1(TZ-1:1).With increase in Zn content,from TZ-1:0.1 to TZ-1:0.2,anatase transformed to rutile phase.TZ-1:0.3,which contained a blend of phases,including rutile and anatase TiO_(2),ZnO,and zinc titanates,exhibited the narrowest bandgap(2.5±0.1 e V),and showed the highest photocatalytic activity.TZ-1:1 was predominated by zinc titanates.All the nanocomposites exhibited narrower bandgaps compared to pure TiO_(2)nanoparticles,facilitating visible light activity.This study was designed to explore whether a method targeting the removal of a specific crystalline phase(anatase)influenced the properties and photocatalytic activity of the nanocomposite.Selective dissolution not only removed anatase phase,but also led to significant loss of crystallinity,widened the bandgap,and adversely affected photocatalytic performance,in nanocomposites that contained>80%anatase phase(TZ-1:0.1 and TZ-1:0.2).However,in nanocomposites that contained less of anatase phase(TZ-1:0.3and TZ-1:1),the morphology,bandgap,crystallinity,and the extent of photocatalytic activity at the end of 240 min remained largely unaffected.Photocatalytic activity in TZ-1:0.3 and TZ-1:1 originated from a blend of phases comprising of less photocatalytically active phases,such as rutile TiO_(2),Zn TiO3,and Zn2TiO4,rather than from the anatase phase.The Ti:Zn molar ratio controlled the phases present in TiO_(2)-ZnO nanocomposites,which,in turn,controlled the physicochemical properties and visible light activity.Thus,in nanocomposites that contained a mix of several phases,the properties and photocatalytic activity were not dependent on anatase phase.展开更多
Rechargeable magnesium batteries(RMBs)are a cutting-edge energy storage solution,with several advantages over the state-of-art lithiumion batteries(LIBs).The use of magnesium(Mg)metal as an anode material provides a m...Rechargeable magnesium batteries(RMBs)are a cutting-edge energy storage solution,with several advantages over the state-of-art lithiumion batteries(LIBs).The use of magnesium(Mg)metal as an anode material provides a much higher gravimetric capacity compared to graphite,which is currently used as the anode material in LIBs.Despite the significant advances in electrolyte,the development of cathode material is limited to materials that operate at low average discharge voltage(<1.0 V vs.Mg/Mg^(2+)),and developing high voltage cathodes remains challenging.Only a few materials have been shown to intercalate Mg^(2+)ions reversibly at high voltage.This review focuses on the structural aspects of cathode material that can operate at high voltage,including the Mg^(2+)intercalation mechanism in relation to its electrochemical properties.The materials are categorized into transition metal oxides and polyanions and subcategorized by the intrinsic Mg^(2+)diffusion path.This review also provides insights into the future development of each material,aiming to stimulate and guide researchers working in this field towards further advancements in high voltage cathodes.展开更多
The surge of distributed renewable energy resources has given rise to the emergence of prosumers,facilitating the low-carbon transition of distribution networks.However,flexible prosumers introduce bidirectional power...The surge of distributed renewable energy resources has given rise to the emergence of prosumers,facilitating the low-carbon transition of distribution networks.However,flexible prosumers introduce bidirectional power and carbon interaction,increasing the complexity of practical decision-making in distribution networks.To address these challenges,this paper presents a carbon-coupled network charge-guided bi-level interactive optimization method between the distribution system operator and prosumers.In the upper level,a carbon-emission responsibility settlement method that incorporates the impact of peer-to-peer(P2P)trading is proposed,based on a carbon-emission flow model and optimal power flow model,leading to the formulation of carbon-coupled network charges.In the lower level,a decentralized P2P trading mechanism is developed to achieve the clearing of energy and carbon-emission rights.Furthermore,an alternating direction method of multipliers with an adaptive penalty factor is introduced to address the equilibrium of the P2P electricity–carbon coupled market,and an improved bisection method is employed to ensure the convergence of the bi-level interaction.A case study on the modified IEEE 33-bus system demonstrates the effectiveness of the proposed model and methodology.展开更多
Piezoelectric and triboelectric effects are of growing interest for facilitating high-sensitivity and self-powered tactile sensor applications.The working principles of piezoelectric and triboelectric nanogenerators p...Piezoelectric and triboelectric effects are of growing interest for facilitating high-sensitivity and self-powered tactile sensor applications.The working principles of piezoelectric and triboelectric nanogenerators provide strategies for enhancing output voltage signals to achieve high sensitivity.Increasing the piezoelectric constant and surface triboelectric charge density are key factors in this enhancement.Methods such as annealing processes,doping techniques,grain orientation controls,crystallinity controls,and composite structures can effectively enhance the piezoelectric constant.For increasing triboelectric output,surface plasma treatment,charge injection,microstructuring,control of dielectric constant,and structural modification are effective methods.The fabrication methods present significant opportunities in tactile sensor applications.This review article summarizes the overall piezoelectric and triboelectric fabrication processes from materials to device aspects.It highlights applications in pressure,touch,bending,texture,distance,and material recognition sensors.The conclusion section addresses challenges and research opportunities,such as limited flexibility,stretchability,decoupling from multi-stimuli,multifunctional sensors,and data processing.展开更多
With electric vehicles(EVs)emerging as a primary mode of transportation,ensuring their reliable operation in harsh environments is crucial.However,lithium-ion batteries(LIBs)suffer from severe polarization at low temp...With electric vehicles(EVs)emerging as a primary mode of transportation,ensuring their reliable operation in harsh environments is crucial.However,lithium-ion batteries(LIBs)suffer from severe polarization at low temperatures,limiting their operation in cold climates.In addition,difficulties in discovering new battery materials have highlighted a growing demand for innovative electrode designs that achieve high performance,even at low temperatu res.To address this issue,we prepared a thin,resistive,and patterned carbon interlayer on the anode current collector.This carbon-patterned layer(CPL)serves as a self-heating layer to efficiently elevate the entire cell temperature,thus improving the rate capability and cyclability at low temperatures while maintaining the performance at room temperature.Furthermore,we validated the versatile applicability of CPLs to large-format LIB cells through experimental studies and electrochemo-thermal multiphysics modeling and simulations,with the results confirming 11%capacity enhancement in 21,700 cylindrical cells at a 0.5C-rate and-24℃.We expect this electrode design to offer reliable power delivery in harsh climates,thereby potentially expanding the applications of LIBs.展开更多
基金supported by the introduction of Talent Research Fund in Nanjing Institute of Technology(YKJ202204)the National Natural Science Foundation of China(52401282 and 52300206)the Natural Science Foundation of Jiangsu Province(BK20230701 and BK20230705).
文摘Achieving high-energy density remains a key objective for advanced energy storage systems.However,challenges,such as poor cathode conductivity,anode dendrite formation,polysulfide shuttling,and electrolyte degradation,continue to limit performance and stability.Molecular and ionic dipole interactions have emerged as an effective strategy to address these issues by regulating ionic transport,modulating solvation structures,optimizing interfacial chemistry,and enhancing charge transfer kinetics.These interactions also stabilize electrode interfaces,suppress side reactions,and mitigate anode corrosion,collectively improving the durability of high-energy batteries.A deeper understanding of these mechanisms is essential to guide the design of next-generation battery materials.Herein,this review summarizes the development,classification,and advantages of dipole interactions in high-energy batteries.The roles of dipoles,including facilitating ion transport,controlling solvation dynamics,stabilizing the electric double layer,optimizing solid electrolyte interphase and cathode–electrolyte interface layers,and inhibiting parasitic reactions—are comprehensively discussed.Finally,perspectives on future research directions are proposed to advance dipole-enabled strategies for high-performance energy storage.This review aims to provide insights into the rational design of dipole-interactive systems and promote the progress of electrochemical energy storage technologies.
基金supported by the Global Joint Research Program funded by the Pukyong National University(202411790001)the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF)+2 种基金funded by the Ministry of Science and ICT(RS-2024-00446825)the Technology Innovation Program(RS-2024-00418815)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)。
文摘Rechargeable magnesium batteries are promising alternatives to traditional lithium batteries because of the high abundance of Mg compounds in earth crust,their low toxicity,and possible favorable properties as electrodes'material.However,Mg metal anodes face several challenges,notably the natively existence of an inactive oxide layer on their surfaces,which reduces their effectiveness.Additionally,interactions of Mg electrodes with electrolyte solutions'components can lead to the formation of insulating surface layers,that can fully block them for ions transport.This review addresses these issues by focusing on surface treatments strategies to enhance electrochemical performance of Mg anodes.It highlights chemical and physical modification techniques to prevent oxidation and inactive-layers formation,as well as their practical implications for MIBs.We also examined the impact of Mg anodes'surface engineering on their electrochemical reversibility and cycling efficiency.Finally,future research directions to improve the performance and commercial viability of magnesium anodes and advance development of high-capacity,safe,and cost-effective energy storage systems based on magnesium electrochemistry are discussed.
基金the technical support for Nano-X from Suzhou Institute of Nano-Tech and NanoBionics,Chinese Academy of Sciences(SINANO)supported by the National Key R&D Program of China(2021YFB3800300)+2 种基金the National Natural Science Foundation of China(22179059,22239002,92372201)the science and technology innovation fund for emission peak and carbon neutrality of Jiangsu province(BK20231512,BK20220034)the Key R&D project funded by department of science and technology of Jiangsu Province(BE2020003)。
文摘Aluminum(Al)exhibits excellent electrical conductivity,mechanical ductility,and good chemical compatibility with high-ionic-conductivity electrolytes.This makes it more suitable as an anode material for all-solid-state lithium batteries(ASSLBs)compared to the overly reactive metallic lithium anode and the mechanically weak silicon anode.This study finds that the pre-lithiated Al anode demonstrates outstanding interfacial stability with the Li_6PS_5Cl(LPSCl)electrolyte,maintaining stable cycling for over 1200 h under conditions of deep charge-discharge.This paper combines the pre-lithiated Al anode with a high-nickel cathode,LiNi_(0.8)Co_(0.1)Mn_(0.1)O_(2),paired with the highly ionic conductive LPSCl electrolyte,to design an ASSLB with high energy density and stability.Using anode pre-lithiation techniques,along with dual-reinforcement technology between the electrolyte and the cathode active material,the ASSLB achieves stable cycling for 1000 cycles at a 0.2C rate,with a capacity retention rate of up to 82.2%.At a critical negative-to-positive ratio of 1.1,the battery's specific energy reaches up to 375 Wh kg^(-1),and it maintains over 85.9%of its capacity after 100 charge-discharge cycles.This work provides a new approach and an excellent solution for developing low-cost,high-stability all-solid-state batteries.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)of the Republic of Korea(Nos.2020R1C1C1003214,2021M3H_(4)A3A01063605,2021R1A4A3024237,and 2020R1C1C1012256).
文摘Colloidal quantum dots(CQDs)are promising semiconducting materials,which can be used as a photoactive layer in various optoelectronic applications,because of their size-tunable bandgap energy,solution processability,and excellent optical and optoelectronic properties.In particular,these features have generated great interest in the development of CQD solar cells and led to a rapid increase in their power conversion efficiency.These improvements were enabled by many innovative approaches in terms of CQD’s surface chemistry and device architecture optimizations.In this review,a critical overview of the research progress in CQD solar cells is presented with a focus on the strategies adopted for achieving record efficiency in CQD solar cells.These strategies include the use of organic/inorganic surface ligands,pre-and post-treatment of CQDs,and solid-state/solution-phase ligand exchange.Additionally,we provide an understanding of the research history to inspire the rational design of next-generation CQD optoelectronic devices,such as solar cells,light-emitting diodes,and photodetectors.Recent research on the development of infrared CQD solar cells as complementary platforms to other solar cell technologies is also critically discussed to provide another perspective on CQD technologies.
文摘Chemical leaching of coals would be required to produce cleaner coals for some special applications where physical benefi-ciation may not be effective enough.This would also help in recovering Li and rare earth metals besides in the sequestration of CO_(2).About 20 Indian coals having complexly distributed moderate to high ash contents were sequentially treated with various alkali–acid such as NaOH-HCl,HF,HCl,HCl-HF,and NaOH-HCl-HF leaching.This aimed to establish and design the best stepwise sequential process for the highest degree of demineralisation through a chemical leaching process.Kinetics and process intensification studies were carried out.More than 80%demineralisation of Madhaipur and Neemcha coals was observed using the best sequential treatment designed presently.The repeated stepwise treatment of the alkali and the acid was also studied,which was found to significantly enhance the degree of demineralisation of coals.The integrated process of alkali–acid leaching followed by solvent extraction(Organo-refining)and vice versa of the treated coal was also studied for producing cleaner coals.
基金supported by the Natural Science Foundation of China(Nos.52125202,52202100,and U24A2065)the Natural Science Foundation of Jiangsu Province(BK20243016)Fundamental Research Funds for the Central Universities,China Postdoctoral Science Foundation(No.2024T171166).
文摘Aqueous zinc-ion batteries(AZIBs)have garnered considerable attention as promising post-lithium energy storage technologies owing to their intrinsic safety,cost-effectiveness,and competitive gravimetric energy density.However,their practical commercialization is hindered by critical challenges on the anode side,including dendrite growth and parasitic reactions at the anode/electrolyte interface.Recent studies highlight that rational electrolyte structure engineering offers an effective route to mitigate these issues and strengthen the electrochemical performance of the zinc metal anode.In this review,we systematically summarize state-of-the-art strategies for electrolyte optimization,with a particular focus on the zinc salts regulation,electrolyte additives,and the construction of novel electrolytes,while elucidating the underlying design principles.We further discuss the key structure–property relationships governing electrolyte behavior to provide guidance for the development of next-generation electrolytes.Finally,future perspectives on advanced electrolyte design are proposed.This review aims to serve as a comprehensive reference for researchers exploring high-performance electrolyte engineering in AZIBs.
基金supported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022R1F1A1070168,2020R1C1C1004322)the Korea Institute of Industrial Technology as Development of core technology for smart wellness care based on cleaner production process technology(KITECH-PEH23030)+1 种基金supported by the Renewable Surplus Sector Coupling Technology Program of the Korea Institute of Energy Technology Evaluation and Planning(KETEP)granted financial resource from the Ministry of Trade,Industry&Energy,Republic of Korea(No.20226210100050)the National Research Council of Science&Technology(NST)grant by the Korea government(MSIT)(No.CPS21141-100)。
文摘Thick electrodes can substantially enhance the overall energy density of batteries.However,insufficient wettability of aqueous electrolytes toward electrodes with conventional hydrophobic binders severely limits utilization of active materials with increasing the thickness of electrodes for aqueous batteries,resulting in battery performance deterioration with a reduced capacity.Here,we demonstrate that controlling the hydrophilicity of the thicker electrodes is critical to enhancing the overall energy density of batteries.Hydrophilic binders are synthesized via a simple sulfonation process of conventional polyvinylidene fluoride binders,considering physicochemical properties such as mechanical properties and adhesion.The introduction of abundant sulfonate groups of binders(i)allows fast and sufficient electrolyte wetting,and(ii)improves ionic conduction in thick electrodes,enabling a significant increase in reversible capacities under various current densities.Further,the sulfonated binder effectively inhibits the dissolution of cathode materials in reactive aqueous electrolytes.Overall,our findings significantly enhance the energy density and contribute to the development of practical zinc-ion batteries.
基金the National Research Foundation of Korea(NRF)grant funded by the Korean government(MSIT)(grant nos.2021R1C1C1007844,2021M3I3A1085039,2020R1F1A1061505,and 2020R1C1C1012014).
文摘Heavy-metal-free ternary Cu–In–Se quantum dots(CISe QDs)are promising for solar fuel production because of their low toxicity,tunable band gap,and high light absorption coefficient.Although defects significantly affect the photophysical properties of QDs,the influence on photoelectrochemical hydrogen production is not well understood.Herein,we present the defect engineering of CISe QDs for efficient solar-energy conversion.Lewis acid–base reactions between metal halide–oleylamine complexes and oleylammonium selenocarbamate are modulated to achieve CISe QDs with the controlled amount of Cu vacancies without changing their morphology.Among them,CISe QDs with In/Cu=1.55 show the most outstanding photoelectrochemical hydrogen generation with excellent photocurrent density of up to 10.7 mA cm-2(at 0.6 VRHE),attributed to the suitable electronic band structures and enhanced carrier concentrations/lifetimes of the QDs.The proposed method,which can effectively control the defects in heavy-metal-free ternary QDs,offers a deeper understanding of the effects of the defects and provides a practical approach to enhance photoelectrochemical hydrogen generation.
文摘A method combining the immersed boundary technique and a multi- relaxation-time （MRT） lattice Boltzmann flux solver （LBFS） is presented for numerical simulation of incompressible flows over circular and elliptic cylinders and NACA 0012 Airfoil. The method uses a simple Cartesian mesh to simulate flows past immersed complicated bodies. With the Chapman-Enskog expansion analysis, a transform is performed between the Navier-Stokes and lattice Boltzmann equations （LBEs）. The LBFS is used to discretize the macroscopic differential equations with a finite volume method and evaluate the interface fluxes through local reconstruction of the lattice Boltzmann solution. The immersed boundary technique is used to correct the intermediate velocity around the solid boundary to satisfy the no-slip boundary condition. Agreement of simulation results with the data found in the literature shows reliability of the proposed method in simulating laminar flows on a Cartesian mesh.
基金supported by National Research Foundation of Korea(NRF)grant funded by Ministry of Science and ICT(MSIT)(2021R1A2C3004420,2021M3H4A1A02055684,and 2020R1C1C1012256)the DGIST R&D Program of the Ministry of Science and ICT(21-CoE-ET-01)Basic Science Research Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Education(2021R1A6A3A14038599).
文摘For efficient colloidal quantum dot(CQD)solar cells(CQD-SCs),thiol-passivated p-type CQDs are generally used as a hole-transporting material(HTM);however,there are issues with the control of optoelectrical properties,low thiol passivation rate,and poor morphology with a power conversion efficiency(PCE)of approximately 11%.Although polymeric HTMs have been introduced to address these issues,maximizing efficiency and achieving green-solvent processability and thermal stability for commercialization is necessary.Here,we synthesize a novel benzodifuran(BDF)-based HTM(asy-ranPBTBDF)showing an electron-deficient state,low steric hindrance,and low planarity compared to those of a typical benzodithiophene(BDT)-based HTM(asy-ranPBTBDT).BDF properties lead to deep high occupied molecular orbital(HOMO)levels,closeπ-πstacking,excellent solubility,and amorphous properties related to efficiency,green-solvent processability,and thermal stability.With these benefits,the asy-ranPBTBDF-based CQD-SC showed enhanced open-circuit voltage(Voc)(0.65 V)and PCE(13.29%)compared to those of the asy-ranPBTBDT-based device(0.63 V and 12.22%)in toxic processes with chlorobenzene.The asy-ranPBTBDF-based CQD-SC showed a PCE of 12.51%in a green-solvent process with 2-methylanisole and improved thermal stability at 80℃(83.8%retaining after 24 h)owing to less lateral crystallization than the asy-ranPBTBDT-based device(60.8%retaining after 24 h).
基金financial assistance from the SERB Core Research Grant(Grant No.CRG/2022/000897)Department of Science and Technology(DST/NM/NT/2019/205(G))+1 种基金Minor Research Project Grant,Jain University(JU/MRP/CNMS/29/2023)CSR acknowledges National Research Foundation of Korea for the Brain Pool program funded by the Ministry of Science and ICT,South Korea(Grant No.RS-2023-00222186).
文摘The Janus MoSSe and alloy MoS_(x)Se_((1-x)),belonging to the family of two-dimensional(2D)transition metal dichalcogenides(TMDs),have gained significant attention for their potential applications in nanotechnology.The unique asymmetric structure of Janus MoSSe provides intriguing possibilities for tailored applications.The alloy MoS_(x)Se_((1-x))offers a tunable composition,allowing for the fine-tuning of the properties to meet specific requirements.These materials exhibit remarkable mechanical,electrical,and optical properties,including a tunable band gap,high absorption coefficient,and photoconductivity.The vibrational and magnetic properties also make it a promising candidate for nanoscale sensing and magnetic storage applications.Properties of these materials can be precisely controlled through different approaches such as size-dependent properties,phase engineering,doping,alloying,defect and vacancy engineering,intercalation,morphology,and heterojunction or hybridisation.Various synthesis methods for 2D Janus MoSSe and alloy MoS_(x)Se_((1-x))are discussed,including hydro/solvothermal,chemical vapour transport,chemical vapour deposition,physical vapour depositio,and other approaches.The review also presents the latest advancements in Janus and alloy MoSSe-based applications,such as chemical and gas sensors,surface-enhanced Raman spectroscopy,field emission,and energy storage.Moreover,the review highlights the challenges and future directions in the research of these materials,including the need for improved synthesis methods,understanding of their stability,and exploration of new applications.Despite the early stages of research,both the MoSSe-based materials have shown significant potential in various fields,and this review provides valuable insights for researchers and engineers interested in exploring its potential.
基金supported by grants from the IIT Delhi FIRP program grant (No. MI02081)
文摘Non-thermal plasma has emerged as an effective treatment system against the latest class of highly recalcitrant and toxic environmental pollutants termed emerging contaminants(ECs).In the present work,a detailed experimental study is carried out to evaluate the efficacy of a non-thermal plasma jet with two dyes,Rd.B and Met.Blue,as model contaminants.The plasma jet provided a complete dye decoloration in 30 min with an applied voltage of 6.5 kV_(p-p).·OH,having the highest oxidation potential,acts as the main reactive species,which with direct action on contaminants also acts indirectly by getting converted into H_(2)O_(2)and O_(3).Further,the effect of critical operational parameters viz,sample pH,applied voltage(4.5–6.5 kV_(p-p)),conductivity(5–20 mS cm^(-1)),and sample distance on plasma treatment efficacy was also examined.Out of all the assessed parameters,the applied voltage and sample conductivity was found to be the most significant operating parameters.A high voltage and low conductivity favored the dye decoloration,while the pH effect was not that significant.To understand the influence of plasma discharge gas on treatment efficacy,all the experiments are conducted with argon and helium gases under the fixed geometrical configuration.Both the gases provided a similar dye decoloration efficiency.The DBD plasma system with complete dye removal also rendered maximum mineralization of 73%for Rd.B,and 60%for Met.Blue.Finally,the system's efficiency against the actual ECs(four pharmaceutical compounds,viz,metformin,atenolol,acetaminophen,and ranitidine)and microbial contaminant(E.coli)was also tested.The system showed effectivity in the complete removal of targeted pharmaceuticals and a log2.5 E.coli reduction.The present systematic characterization of dye degradation could be of interest to large communities working towards commercializing plasma treatment systems.
基金supported in part by the JSPS-CAS Core-University Program in the field of Plasma and Nuclear Fusion and the JSPS Grant-in-Aid for Exploratory Research(No.6656287)
文摘On the Large Helical Device （LHD） where nested magnetic surfaces are surrounded by the ergodic field layer, edge transport barrier （ETB） was produced in neutral-beam-injection （NBI） heated plasmas through transition and non-transition processes. The former case is the ETB formation by L-Htransition, where characteristics of L-H transition observed in a tokamak plasma are clearly recognized. The confinement improvement is the modest （- 10%）, compared with the ISS95 international stellarator scaling. The threshold power for the transition is comparable or slightly lower than the ITER scaling law established by tokamaks and compact tori. The ETB is formed inside the ergodic field layer of the vacuum field. The ETB formation destabilizes edge coherent modes such as m/n = 1/1, 2/3 and 1/2, of which rational surfaces are in the magnetic hill. The formed ETB is partially and transiently destroyed by these coherent edge MHD modes and edge localized modes （ELMs） typically observed in Ha signals. The latter ETB is observed in a plasma with large reversed NBI-driven current more than 100 kA at Bt = 1 T. In these plasmas, the edge magnetic shear is enhanced by the current and the rotational transform in the core region is expected to be appreciably reduced. Thus reduced rotational transform in the plasma central region will enhance outward heat and particle fluxes toward ergodic edge layer. The ETB with steep electron temperature gradient up to - 5 keV/m is formed by blocking enhanced outward heat flux.
基金the University Grants Commission,India for providing a Non-NET fellowship。
文摘We study the nonlinear coupling of kinetic Alfvén waves with ion acoustic waves applicable to the Earth’s radiation belt and near-Sun streamer belt solar wind using dynamical equations in the form of modified Zakharov systems.Numerical simulations show the formation of magnetic field filamentary structures associated with density humps and dips which become turbulent at later times,redistributing the energy to higher wavenumbers.The magnetic power spectra exhibit an inertial range Kolmogorov-like spectral index value of-5/3 for k_(⊥)ρ_(i)<1 followed by a steeper dissipation range spectra with indices~-3 for the radiation belt case and~-4 for the nearSun streamer belt solar wind case,here k_(⊥)andρ_(i)represent the wavevector component perpendicular to the background magnetic field and the ion thermal gyroradius,respectively.Applying quasilinear theory in terms of the Fokker-Planck equation in the region of wavenumber turbulent spectra,we find the particle distribution function flattening in the superthermal tail population which is the signature of particle energization and plasma heating.
基金financial assistance provided by IIT Delhi under new faculty start-up grant for establishing the testing facilities at the laboratory in the Department of Energy Science and Engineering.
文摘A disruptive approach to a fundamental process has been applied in a biomass combustion device with two variable speed fans to supply air for gasification and another for combustion processes,separately.Besides,the preheating of secondary air,required for combustion process was also ensured through annulus chamber before being fed into the combustion chamber.The turbulent flow and homogenous mixing were also ensured by controlling the flow rate resulting in the reduced emissions of carbon monoxide(CO)and fine particulate matter(PM 2.5,particulate matter having aerodynamic diameter<2.5 micron).The design approach applied here has also ensured the homogeneous mixing of preheated air with the volatiles,resulted in cleaner combustion.This arrangement has led to the emissions of PM2.5 and CO much better than those of the earlier cookstove models,and very close to that of a liquefied petroleum gas(LPG)stove.Further,the comparative analysis based on the modified star rating of total 15(14 are biomass and another LPG)cookstove models tested using the same standard methodology has been done and presented in this study.Based on the star rating,the performance of the LPG stove was found to be best and assigned as a 5-star product followed by the IITD model(4-star),while the other 13 models got different ratings starting from 1-star to 3-star,respectively.Also,the thermal performance of the IITD cookstove model is found to be the highest,while the emission characteristics are found to be the least among all biomass cookstove models,presented here.
基金provided by Department of Science and Technology,New Delhi,India,under the Water Technology Initiative(WTI)scheme(Project code:DST/TM/WTI/2K15/101(G)).
文摘TiO_(2)-ZnO nanocomposites were synthesized by varying Ti:Zn molar ratio from 1:0.1(TZ-1:0.1)to 1:1(TZ-1:1).With increase in Zn content,from TZ-1:0.1 to TZ-1:0.2,anatase transformed to rutile phase.TZ-1:0.3,which contained a blend of phases,including rutile and anatase TiO_(2),ZnO,and zinc titanates,exhibited the narrowest bandgap(2.5±0.1 e V),and showed the highest photocatalytic activity.TZ-1:1 was predominated by zinc titanates.All the nanocomposites exhibited narrower bandgaps compared to pure TiO_(2)nanoparticles,facilitating visible light activity.This study was designed to explore whether a method targeting the removal of a specific crystalline phase(anatase)influenced the properties and photocatalytic activity of the nanocomposite.Selective dissolution not only removed anatase phase,but also led to significant loss of crystallinity,widened the bandgap,and adversely affected photocatalytic performance,in nanocomposites that contained>80%anatase phase(TZ-1:0.1 and TZ-1:0.2).However,in nanocomposites that contained less of anatase phase(TZ-1:0.3and TZ-1:1),the morphology,bandgap,crystallinity,and the extent of photocatalytic activity at the end of 240 min remained largely unaffected.Photocatalytic activity in TZ-1:0.3 and TZ-1:1 originated from a blend of phases comprising of less photocatalytically active phases,such as rutile TiO_(2),Zn TiO3,and Zn2TiO4,rather than from the anatase phase.The Ti:Zn molar ratio controlled the phases present in TiO_(2)-ZnO nanocomposites,which,in turn,controlled the physicochemical properties and visible light activity.Thus,in nanocomposites that contained a mix of several phases,the properties and photocatalytic activity were not dependent on anatase phase.
基金supported by the Nano&Material Technology Development Program through the National Research Foundation of Korea(NRF)funded by the Ministry of Science and ICT(RS-2024-00446825)by the Technology Innovation Program(RS-2024-00418815)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea).
文摘Rechargeable magnesium batteries(RMBs)are a cutting-edge energy storage solution,with several advantages over the state-of-art lithiumion batteries(LIBs).The use of magnesium(Mg)metal as an anode material provides a much higher gravimetric capacity compared to graphite,which is currently used as the anode material in LIBs.Despite the significant advances in electrolyte,the development of cathode material is limited to materials that operate at low average discharge voltage(<1.0 V vs.Mg/Mg^(2+)),and developing high voltage cathodes remains challenging.Only a few materials have been shown to intercalate Mg^(2+)ions reversibly at high voltage.This review focuses on the structural aspects of cathode material that can operate at high voltage,including the Mg^(2+)intercalation mechanism in relation to its electrochemical properties.The materials are categorized into transition metal oxides and polyanions and subcategorized by the intrinsic Mg^(2+)diffusion path.This review also provides insights into the future development of each material,aiming to stimulate and guide researchers working in this field towards further advancements in high voltage cathodes.
基金supported by Institutional Research Fund from Sichuan University(0-1 Innovation Research Project,2023SCUH0002)the Sichuan Science and Technology Program(2024YFHZ0312)+1 种基金the Chengdu Science and Technology Program(2024YF0600012HZ)the National Natural Science Foundation of China(U2166211 and 52177103).
文摘The surge of distributed renewable energy resources has given rise to the emergence of prosumers,facilitating the low-carbon transition of distribution networks.However,flexible prosumers introduce bidirectional power and carbon interaction,increasing the complexity of practical decision-making in distribution networks.To address these challenges,this paper presents a carbon-coupled network charge-guided bi-level interactive optimization method between the distribution system operator and prosumers.In the upper level,a carbon-emission responsibility settlement method that incorporates the impact of peer-to-peer(P2P)trading is proposed,based on a carbon-emission flow model and optimal power flow model,leading to the formulation of carbon-coupled network charges.In the lower level,a decentralized P2P trading mechanism is developed to achieve the clearing of energy and carbon-emission rights.Furthermore,an alternating direction method of multipliers with an adaptive penalty factor is introduced to address the equilibrium of the P2P electricity–carbon coupled market,and an improved bisection method is employed to ensure the convergence of the bi-level interaction.A case study on the modified IEEE 33-bus system demonstrates the effectiveness of the proposed model and methodology.
基金supported by National Research Foundation of Korea(2022M3D1A2054488)Technology Innovation Program(20025736,Development of MICS SoC and platform for in-vivo implantable electroceutical device)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)。
文摘Piezoelectric and triboelectric effects are of growing interest for facilitating high-sensitivity and self-powered tactile sensor applications.The working principles of piezoelectric and triboelectric nanogenerators provide strategies for enhancing output voltage signals to achieve high sensitivity.Increasing the piezoelectric constant and surface triboelectric charge density are key factors in this enhancement.Methods such as annealing processes,doping techniques,grain orientation controls,crystallinity controls,and composite structures can effectively enhance the piezoelectric constant.For increasing triboelectric output,surface plasma treatment,charge injection,microstructuring,control of dielectric constant,and structural modification are effective methods.The fabrication methods present significant opportunities in tactile sensor applications.This review article summarizes the overall piezoelectric and triboelectric fabrication processes from materials to device aspects.It highlights applications in pressure,touch,bending,texture,distance,and material recognition sensors.The conclusion section addresses challenges and research opportunities,such as limited flexibility,stretchability,decoupling from multi-stimuli,multifunctional sensors,and data processing.
基金financially supported by the Institute of Civil Military Technology Cooperation funded by the Defense Acquisition Program Administration and Ministry of Trade,Industry and Energy of Korean government under grant No.22-CM-FC-20the support from the DGIST Supercomputing and Bigdata Center。
文摘With electric vehicles(EVs)emerging as a primary mode of transportation,ensuring their reliable operation in harsh environments is crucial.However,lithium-ion batteries(LIBs)suffer from severe polarization at low temperatures,limiting their operation in cold climates.In addition,difficulties in discovering new battery materials have highlighted a growing demand for innovative electrode designs that achieve high performance,even at low temperatu res.To address this issue,we prepared a thin,resistive,and patterned carbon interlayer on the anode current collector.This carbon-patterned layer(CPL)serves as a self-heating layer to efficiently elevate the entire cell temperature,thus improving the rate capability and cyclability at low temperatures while maintaining the performance at room temperature.Furthermore,we validated the versatile applicability of CPLs to large-format LIB cells through experimental studies and electrochemo-thermal multiphysics modeling and simulations,with the results confirming 11%capacity enhancement in 21,700 cylindrical cells at a 0.5C-rate and-24℃.We expect this electrode design to offer reliable power delivery in harsh climates,thereby potentially expanding the applications of LIBs.
