The fundamental scientific and engineering knowledge concerning the solar power curve,which maps solar irradiance and other auxiliary meteorological variables to photovoltaic output power,has been gathered and put for...The fundamental scientific and engineering knowledge concerning the solar power curve,which maps solar irradiance and other auxiliary meteorological variables to photovoltaic output power,has been gathered and put forward in the preceding tutorial review.Despite the many pages of that review,it was incomplete in the sense that it did not elaborate on the applications of this very important tool of solar energy meteorology.Indeed,solar power curves are ubiquitously needed in a broad spectrum of solar forecasting and solar resource assessment tasks.Hence,this tutorial review should continue from where it left off and present examples concerning the usage of solar power curves.In a nutshell,this tutorial review,together with the preceding one,should elucidate how surface shortwave radiation data,be they ground-based,satelliteretrieved,or model-output,are bridged to various power system operations via solar power curves.展开更多
Over the years,zinc-ion batteries(ZIBs)have attracted attention as a promising next-generation energy storage technology because of their excellent safety,long cycling performance,eco-friendliness,and high-power densi...Over the years,zinc-ion batteries(ZIBs)have attracted attention as a promising next-generation energy storage technology because of their excellent safety,long cycling performance,eco-friendliness,and high-power density.However,issues,such as the corrosion and dissolution of the Zn anode,limited wet-tability,and lack of sufficient nucleation sites for Zn plating,have limited their practical application.The introduction of a protective layer comprising of tellurium(Te)nanobelts onto the surface of Zn anode has emerged as a promising approach to overcome these limitations and improve the electrochemical behav-ior by enhancing the safety and wettability of ZIBs,as well as providing numerous nucleation sites for Zn plating.In the presence of a Te-based protective layer,the energy power density of the surface-engineered Zn anode improved significantly(ranging from 310 to 144 W h kg^(-1),over a power density range of 270 to 1,800 W kg^(-1)),and the lifespan capability was extended.These results demonstrate that the proposed strategy of employing Te nanobelts as a protective layer holds great promise for enhancing the energy storage performance of zIBs,making them even more attractive as a viable energy storage solution forthefuture.展开更多
The performance degradation of micro light-emitting diodes(micro-LEDs)is closely associated with the deterioration of sidewall passivation layers under prolonged electrical bias.We investigate reliability improvements...The performance degradation of micro light-emitting diodes(micro-LEDs)is closely associated with the deterioration of sidewall passivation layers under prolonged electrical bias.We investigate reliability improvements in 20μm×20μm InGaN/GaN blue micro-LEDs by suppressing the formation of an unstable interfacial layer during sidewall passivation.SiO_(2)is deposited on the etched mesa sidewalls using either Sputtering or plasma-enhanced chemical vapor deposition(PECVD).Comparative analysis reveals that PECVD-passivated devices experience more severe performance degradation,primarily due to the increased leakage current.After 100 h of accelerated aging,external quantum efficiency decreases by 44%in PECVD-passivated samples,whereas Sputter-passivated devices exhibit only an11%reduction.This discrepancy is attributed to the formation of a thicker and chemically unstable gallium oxynitride(Ga-O_(X)-N_(1-X))interfacial layer at the SiO_(2)∕GaN-based interface,which facilitates the generation of sidewall defects.Suppressing the formation of this interlayer enhances the crystallinity and structural stability of the passivation layer,thereby mitigating the activation of point defects.Notably,Sputter deposition is more effective in minimizing the formation of Ga-O-N interlayer.These findings emphasize the critical role of achieving low-defect-density sidewall passivation to improve the reliability of micro-LEDs for next-generation high-resolution display applications.展开更多
This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow con...This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow control technique utilizing a tubercle and vortex generator(VG)close to the leading edge was analyzed numerically for a NACA0015 airfoil.In this study,the Shear Stress Transport(SST)turbulence model was employed in the numerical modelling.Numerical modelling was completed using the ANSYS-Fluent 18.2 solver.Analyses were conducted to investigate the flow pattern and understand the underlying LSB control phenomena that enabled the new passive flow control method to provide this significant performance benefit.The findings indicated that the new concept of passive flow control technique suppressed the formation of an LSB at the suction surface of the NACA0015 airfoil,resulting in a higher lift coefficient and improved aerodynamic performance.Improvements in LSB dynamics and aerodynamic performance through the passive flow control method lead to increased energy output and enhanced stability.展开更多
Preparation of hierarchically porous, heteroatom-rich nanostructured carbons through green and scalable routes plays a key role for practical energy storage applications. In this work, naturally abundant lignocellulos...Preparation of hierarchically porous, heteroatom-rich nanostructured carbons through green and scalable routes plays a key role for practical energy storage applications. In this work, naturally abundant lignocellulosic agricultural waste with high initial oxygen content, hazelnut shells, were hydrothermally carbonized and converted into nanostructured ‘hydrochar’. Environmentally benign ceramic/magnesium oxide（Mg O） templating was used to introduce porosity into the hydrochar. Electrochemical performance of the resulting material（HM700） was investigated in aqueous solutions of 1 M H;SO;, 6 M KOH and1 M Na;SO;, using a three-electrode cell. HM700 achieved a high specific capacitance of 323.2 F/g in 1 M H;SO;（at 1 A/g,-0.3 to 0.9 V vs. Ag/Ag Cl） due to the contributions of oxygen heteroatoms（13.5 wt%）to the total capacitance by pseudo-capacitive effect. Moreover, a maximum energy density of 11.1 Wh/kg and a maximum power density of 3686.2 W/kg were attained for the symmetric supercapacitor employing HM700 as electrode material（1 M Na;SO;, E = 2 V）, making the device promising for green supercapacitor applications.展开更多
The discovery of efficient,selective,and stable electrocatalysts can be a key point to produce the largescale chemical fuels via electrochemical CO_(2) reduction(ECR).In this study,an earth-abundant and nontoxic ZnO-b...The discovery of efficient,selective,and stable electrocatalysts can be a key point to produce the largescale chemical fuels via electrochemical CO_(2) reduction(ECR).In this study,an earth-abundant and nontoxic ZnO-based electrocatalyst was developed for use in gas-diffusion electrodes(GDE),and the effect of nitrogen(N)doping on the ECR activity of ZnO electrocatalysts was investigated.Initially,a ZnO nanosheet was prepared via the hydrothermal method,and nitridation was performed at different times to control the N-doping content.With an increase in the N-doping content,the morphological properties of the nanosheet changed significantly,namely,the 2D nanosheets transformed into irregularly shaped nanoparticles.Furthermore,the ECR performance of Zn O electrocatalysts with different N-doping content was assessed in 1.0 M KHCO_(3) electrolyte using a gas-diffusion electrode-based ECR cell.While the ECR activity increased after a small amount of N doping,it decreased for higher N doping content.Among them,the N:ZnO-1 h electrocatalysts showed the best CO selectivity,with a faradaic efficiency(FE_(CO))of 92.7%at-0.73 V vs.reversible hydrogen electrode(RHE),which was greater than that of an undoped Zn O electrocatalyst(FE_(CO)of 63.4%at-0.78 V_(RHE)).Also,the N:ZnO-1 h electrocatalyst exhibited outstanding durability for 16 h,with a partial current density of-92.1 mA cm^(-2).This improvement of N:ZnO-1 h electrocatalyst can be explained by density functional theory calculations,demonstrating that this improvement of N:ZnO-1 h electrocatalyst comes from(ⅰ)the optimized active sites lowering the free energy barrier for the rate-determining step(RDS),and(ⅱ)the modification of electronic structure enhancing the electron transfer rate by N doping.展开更多
In this paper, neutronic analysis in a laser fusion inertial confinement fusion fission energy （LIFE） engine fuelled plutonium and minor actinides using a MCNP codes was investigated. LIFE engine fuel zone contained...In this paper, neutronic analysis in a laser fusion inertial confinement fusion fission energy （LIFE） engine fuelled plutonium and minor actinides using a MCNP codes was investigated. LIFE engine fuel zone contained 10 vol% TRISO particles and 90 vol% natural lithium coolant mixture. TRISO fuel compositions have Mod①： reactor grade plutonium （RG-Pu）, Mod②： weapon grade plutonium （WG-Pu） and Mod③： minor actinides （MAs）. Tritium breeding ratios （TBR） were computed as 1.52, 1.62 and 1.46 for Mod（D, Mod② and Mod③, respectively. The operation period was computed as ~21 years when the reference TBR 〉 1.05 for a self- sustained reactor for all investigated cases. Blanket energy multiplication values （M） were calculated as 4.18, 4.95 and 3.75 for Mod①, Mod② and Mod③, respectively. The bumup （BU） values were obtained as ~1230, ~1550 and ~1060 GWd tM-1, respectively. As a result, the higher BU were provided with using TRISO particles for all cases in LIFE engine.展开更多
As lead halide perovskite(LHP)semiconductors have shown tremendous promise in many application fields,and particularly made strong impact in the solar photovoltaic area,low dimensional quantum dot forms of these perov...As lead halide perovskite(LHP)semiconductors have shown tremendous promise in many application fields,and particularly made strong impact in the solar photovoltaic area,low dimensional quantum dot forms of these perovskites are showing the potential to make distinct marks in the fields of electronics,optoelectronics and photonics.The so-called perovskite quantum dots(PQDs)not only possess the most important features of LHP materials,i.e.,the unusual high defect tolerance,but also demonstrate clear quantum size effects,along with exhibiting desirable optoelectronic properties such as near perfect photoluminescent quantum yield,multiple exciton generation and slow hot-carrier cooling.Here,we review the advantageous properties of these nanoscale perovskites and survey the prospects for diverse applications which include lightemitting devices,solar cells,photocatalysts,lasers,detectors and memristors,emphasizing the distinct superiorities as well as the challenges.展开更多
In this paper,the installation of energy storage systems(EES)and their role in grid peak load shaving in two echelons,their distribution and generation are investigated.First,the optimal placement and capacity of the ...In this paper,the installation of energy storage systems(EES)and their role in grid peak load shaving in two echelons,their distribution and generation are investigated.First,the optimal placement and capacity of the energy storage is taken into consideration,then,the charge-discharge strategy for this equipment is determined.Here,Genetic Algorithm(GA)and Particle Swarm Optimization(PSO)are used to calculate the minimum and maximum load in the network with the presence of energy storage systems.The energy storage systems were utilized in a distribution system with the aid of a peak load shaving approach.Ultimately,the battery charge-discharge is managed at any time during the day,considering the load consumption at each hour.The results depict that the load curve reached a constant state by managing charge-discharge with no significant changes.This shows the significance of such matters in terms of economy and technicality.展开更多
Uttarakhand state comes under special category state where approximately 69.45% population lived in rural area under the population density with varied range of 37 to 607 persons per sq.km. Although Uttarakhand is hav...Uttarakhand state comes under special category state where approximately 69.45% population lived in rural area under the population density with varied range of 37 to 607 persons per sq.km. Although Uttarakhand is having per capita consumption of 1112.29 kWh which is higher than national average per capita consumption of 779 kWh as till date, but remote communities, villages are not able to access clean, cheep and good quality of energy due to uneven terrain, lack of proper transmission & distribution lines [1]. 100% villages are electrified under the RGGVY scheme as per the Ministry of Power Government of India, but due to poor loading of transformer, lack of grid infrastructure and natural calamities, remote house owners are not able to get good quality of power thus affect the livelihood and source of income generation in various means [2]. As Uttarakhand state having future plans to be make state energy sufficient and energy access to all by year 2016-2017, so major ground level initiative have been taken by Government of Uttarakhand. The government of Uttarakhand has incorporated innovative business model to provide good quality of power with non-conventional energy source. Under the initiative invlovement of local people and village level, panchayats have ownership and responsibility to operate these clean energy business model to improve livelihood in remote hilly places of Uttarakhand. Under this analysis, five different type of community models are categorized as Community 1, Community 2, Community 3, Standalone 1 & Standalone 2 for rural &remote communities based on number of unclustered households with the distance covered between 200 m to 20 km, and electrical loads i.e. lighting, fan, mobile chargers, television along with time of day energy consumption patterns. These community models are for remote hilly location where grid integration and distribution lines are not feasible to built due to hilly terrain, low soil strength and huge expenses for expanding power cables for supplying good quality power. The preliminary studies and simulations has been done in HOMER tool by considering the various composite source of power, i.e. Solar PV with battery bank, Solar PV with battery Bank & Generator, and Solar PV along with DG. These three hybrid source of power generation with Solar PV as base source under five different community models, the techno-commercial feasibility has been analyzed in terms of load sharing proposition with Solar PV and battery, DG, Energy production through PV, load consumption per year, Excess and unmet energy monitoring, battery sizing to meet the load during nights, DG operation when the solar energy not available due to weather condition and non availability of sunshine in night. Financial feasibility has been examined in terms of levelized cost of energy, cost summary and O&M cost per year of three integrated sources of energy generation with Solar PV under each community model. Solar PV power plant , which is the best renewable source of energy to cater energy access issue in remote hilly places. The Uttarakhand receives good amout of daily average radiation level of 5.14 - 5.50 kWh/m2/day. Financial feasible community models for different hilly region based on their energy consumption need to be implemented with the help of local community by providing ownership to local people, panchayat, for it not only caters energy access issue but also provides clean, cheep, uninterruptable energy and improves livelihood standard to locals by engaging them into operation maintenance and tariff or rent collection. The study shows that Solar PV power plant with battery bank is the optimal solution considering life cycle cost of hybrid system. It is feasible due to low operation and maintenance cost, price declination of battery and Solar PV module, battery prices at time of replacement.展开更多
Sodium-ion batteries(SIBs)have attracted significant attention in large-scale energy storage system because of their abundant sodium resource and cost-effectiveness.Layered oxide materials are particularly promising a...Sodium-ion batteries(SIBs)have attracted significant attention in large-scale energy storage system because of their abundant sodium resource and cost-effectiveness.Layered oxide materials are particularly promising as SIBs cathodes due to their high theoretical capacities and facile synthesis.However,their practical applications are hindered by the limitations in energy density and cycling stability.The comprehensive understanding of failure mechanisms within bulk structure and at the cathode/electrolyte interface of cathodes is still lacking.In this review,the issues related to bulk phase degradation and surface degradation,such as irreversible phase transitions,cation migration,transition metal dissolution,air/moisture instability,intergranular cracking,interfacial reactions,and reactive oxygen loss,are discussed.The latest advances and strategies to improve the stability of layered oxide cathodes and full cells are provided,as well as our perspectives on the future development of SIBs.展开更多
Magnesium and its alloys have gained relevance for their light-weight combined with a high value of strength-to-weight ratio,which makes them useful in fields such as aerospace,automotive as well as biomedical enginee...Magnesium and its alloys have gained relevance for their light-weight combined with a high value of strength-to-weight ratio,which makes them useful in fields such as aerospace,automotive as well as biomedical engineering.Unfortunately,the poor corrosion resistance of Mg-alloys limits their wide acceptance.Advanced composite coatings which are self-healing,superhydrophobic anti corrosive,and wear resistant are new synthetic materials for abating these challenges.The superimposed superhydrophobic surfaces help in minimizing their water contact,thus slowing down the electrochemical reactions on the surface of the alloys,while their self-healing characteristics autonomously aid in the repair of any induced micro-crack,defect or damage towards ensuring the metal's long-term protection.In addition,the integration of wear-resistant materials further improves the durability of coatings under mechanical stress.The most recent research efforts have been directed towards the preparation of multifunctional composites,with an emphasis on nanomaterials,functional polymers,and state-of-the-art fabrication techniques in order to take advantage of their synergistic effects.Some of the methods that have so far exhibited promising potentials in fabricating these materials include the sol-gel method,layer-by-layer assembly,and plasma treatments.However,most of the fabricated products are still faced with significant challenges ranging from long-term stability to homogeneous adhesion of the coatings and their scalability for industrial applications.This review discusses the recent progress and the relationship between corrosion inhibition and self-healing efficiencies of wear resistant polymer nanocomposite coatings.Some challenges related to optimizing coating performance were also discussed.In addition,future directions ranging from the consideration of bioinspired designs,novel hybrid nanocomposite materials,and environmentally sustainable solutions integrated with smart protective coatings were also proposed as new wave technologies that can potentially revolutionize the corrosion protection offered by Mg alloys while opening up prospects for improved performance and sustainability.展开更多
Bio-cement and bio-concrete are innovative solutions for sustainable construction, aiming to reduce environmental impact while maintaining the durability and versatility of building materials. Bio-cement is an eco-fri...Bio-cement and bio-concrete are innovative solutions for sustainable construction, aiming to reduce environmental impact while maintaining the durability and versatility of building materials. Bio-cement is an eco-friendly alternative to traditional cement, produced through Microbially Induced Calcium Carbonate Precipitation (MICP), which mimics natural biomineralization processes. This method reduces CO2 emissions and enhances the strength and durability of construction materials. Bio-concrete incorporates bio-cement into concrete, creating a self-healing material. When cracks form in bio-concrete, dormant bacteria within the material become active in the presence of water, producing limestone to fill the cracks, extending the material’s lifespan and reducing the need for repairs. The environmental impact of traditional cement production is significant, with cement generation accounting for up to 8% of global carbon emissions. Creative solutions are needed to develop more sustainable construction materials, with some efforts using modern innovations to make concrete ultra-durable and others turning to science to create affordable bio-cement. The research demonstrates the potential of bio-cement to revolutionize sustainable building practices by offering a low-energy, low-emission alternative to traditional cement while also addressing environmental concerns. The findings suggest promising applications in various construction scenarios, including earthquake-prone areas, by enhancing material durability and longevity through self-repair mechanisms.展开更多
It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimens...It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.展开更多
The objective of this paper is the evaluation of business opportunities attractiveness in RER （renewable-energy resources） within a specific geographic area, and using some concepts of integrated energy-resource pla...The objective of this paper is the evaluation of business opportunities attractiveness in RER （renewable-energy resources） within a specific geographic area, and using some concepts of integrated energy-resource planning. The proposed methodology includes the main figures of economic merit evaluated to each resource assessed, the sensitivity analysis on cash flow, and recommendations of investments to each energy option assessed. A study case is applied within the northwest region of Sao Paulo State （Brazil） for those renewable-energy options. Five options of renewable-energy resources were chosen to be evaluated： three ERs （energy resources） from supply side （small hydro, wind farms and sugarcane bagasse） and two ERs from demand side （replacement of incandescent lighting by fluorescent and replacement of electric showers by central heating systems）. The conclusion is that, only two assessed ERs that have received investment grade were sugarcane biomass and fluorescent lamps replacing incandescent lamps. The rest have restriction due different reasons listed.展开更多
Three-dimensional printing(3DP)offers valuable insight into the characterization of natural rocks and the verification of theoretical models due to its high reproducibility and accurate replication of complex defects ...Three-dimensional printing(3DP)offers valuable insight into the characterization of natural rocks and the verification of theoretical models due to its high reproducibility and accurate replication of complex defects such as cracks and pores.In this study,3DP gypsum samples with different printing directions were subjected to a series of uniaxial compression tests with in situ micro-computed tomography(micro-CT)scanning to quantitatively investigate their mechanical anisotropic properties and damage evolution characteristics.Based on the two-dimensional(2D)CT images obtained at different scanning steps,a novel void ratio variable was derived using the mean value and variance of CT intensity.Additionally,a constitutive model was formulated incorporating the proposed damage variable,utilizing the void ratio variable.The crack evolution and crack morphology of 3DP gypsum samples were obtained and analyzed using the 3D models reconstructed from the CT images.The results indicate that 3DP gypsum samples exhibit mechanical anisotropic characteristics similar to those found in naturally sedimentary rocks.The mechanical anisotropy is attributed to the bedding planes formed between adjacent layers and pillar-like structures along the printing direction formed by CaSO_(4)·2H_(2)O crystals of needle-like morphology.The mean gray intensity of the voids has a positive linear relationship with the threshold value,while the CT variance and void ratio have concave and convex relationships,respectively.The constitutive model can effectively match the stress–strain curves obtained from uniaxial compression experiments.This study provides comprehensive explanations of the failure modes and anisotropic mechanisms of 3DP gypsum samples,which is important for characterizing and understanding the failure mechanism and microstructural evolution of 3DP rocks when modeling natural rock behavior.展开更多
Coupled thermo-hydro-mechanical(THM)processes in fractured rock are playing a crucial role in geoscience and geoengineering applications.Diverse and conceptually distinct approaches have emerged over the past decades ...Coupled thermo-hydro-mechanical(THM)processes in fractured rock are playing a crucial role in geoscience and geoengineering applications.Diverse and conceptually distinct approaches have emerged over the past decades in both continuum and discontinuum perspectives leading to significant progress in their comprehending and modeling.This review paper offers an integrated perspective on existing modeling methodologies providing guidance for model selection based on the initial and boundary conditions.By comparing various models,one can better assess the uncertainties in predictions,particularly those related to the conceptual models.The review explores how these methodologies have significantlyenhanced the fundamental understanding of how fractures respond to fluid injection and production,and improved predictive capabilities pertaining to coupled processes within fractured systems.It emphasizes the importance of utilizing advanced computational technologies and thoroughly considering fundamental theories and principles established through past experimental evidence and practical experience.The selection and calibration of model parameters should be based on typical ranges and applied to the specificconditions of applications.The challenges arising from inherent heterogeneity and uncertainties,nonlinear THM coupled processes,scale dependence,and computational limitations in representing fieldscale fractures are discussed.Realizing potential advances on computational capacity calls for methodical conceptualization,mathematical modeling,selection of numerical solution strategies,implementation,and calibration to foster simulation outcomes that intricately reflectthe nuanced complexities of geological phenomena.Future research efforts should focus on innovative approaches to tackle the hurdles and advance the state-of-the-art in this critical fieldof study.展开更多
Ice-assisted synthesis is a facile,effective,and eco-friendly approach for preparing environmental functional materials.The quasi-liquid layer(QLL)or ice grain boundary(IGB)of the ice provides ideal interface-confined...Ice-assisted synthesis is a facile,effective,and eco-friendly approach for preparing environmental functional materials.The quasi-liquid layer(QLL)or ice grain boundary(IGB)of the ice provides ideal interface-confined environments for preparing two-dimensional(2D)sheet-like,three-dimensional(3D)hierarchical porous,polymeric hybrid,and atomically dispersed materials via the in-situ interfacial chemical reactions.Ice-templating physical pretreatment allows directional assembly of preformed materials,sheet exfoliation from bulk materials,transfer or cleaning of 2D materials,uniform dispersion of precursors,and self-assembly of nanoparticles.Additionally,the ice-melting process offers a novel way to prepare nanomaterials of uniform size due to the ultraslow release of reactants from the ice crystals.Furthermore,environmental applications of ice-assisted synthetic materials have been concluded.Advanced membrane materials synthesized based on ice chemistry exhibit superior water permeance,ion selectivity,and disinfection.Also,ice-assisted synthesis has innate advantages for designing environmental functional catalysts or adsorbents dedicated to environmental remediation.Finally,the challenges of the current progress in this field are discussed.展开更多
In aqueous zinc-ion batteries(ZIBs),the separator plays a critical role beyond merely acting as an ionicconductive medium-it directly influences Zn^(2+) flux uniformity,desolvation characteristics,and overall electroc...In aqueous zinc-ion batteries(ZIBs),the separator plays a critical role beyond merely acting as an ionicconductive medium-it directly influences Zn^(2+) flux uniformity,desolvation characteristics,and overall electrochemical reversibility.Therefore,addressing the inherent limitations of conventional separator materials-such as non-uniform ion transport and structural deformation-and introducing surface functionalities are critical for enhancing electrochemical performance.In this study,a polyvinylidene fluoride(PVDF) layer was coated onto the surface of a glass fiber(GF) separator to suppress structural deformation caused by prolonged electrolyte exposure.Furthermore,plasma treatment introduced hydrophilic functional groups onto the PVDF surface,enabling hydrogen bonding with water molecules and suppressing H_(2)O-induced side reactions.An MnO_(2)‖Zn full cell using the FP@GF separator retained ~98 % of its initial capacity after 350 cycles.Even after extensive charge/discharge cycling,the interface between the separator and Zn anode remained clean.Moreover,the MnO_(2)‖Zn full cell maintained a capacity exceeding 101 mAh g^(-1) at 2.0 C after 30 days of storage,approximately twice that of its bare-GF-based counterpart.Thus,this study demonstrates a strategy to overcome the mechanical shortcomings of GF separators and suppress water-induced parasitic reactions in aqueous electrolytes,substantially enhancing the longterm stability of GF-based ZIBs.展开更多
Metal dichalcogenide-based 2D materials,gained considerable attention recently as a hydrogen evolution reaction(HER)electrocatalyst.In this work,we synthesized MoSe_(2)-based electrocatalyst via hydrothermal route wit...Metal dichalcogenide-based 2D materials,gained considerable attention recently as a hydrogen evolution reaction(HER)electrocatalyst.In this work,we synthesized MoSe_(2)-based electrocatalyst via hydrothermal route with varying phase contents(1T/2H)and respective HER performances were evaluated under the acidic media(0.5 M H_(2)SO_(4)),where best HER performance was obtained from the sample consisting of mixed 1T/2H phases,which was directly grown on a carbon paper(167 mV at10 mA cm^(-2))Furthermore,HER performance of electrocatalyst was further improved by in-situ electrodeposition of Pt nanoparticles(0.15 wt%)on the MoSe_(2) surface,which lead to significant enhancement in the HER performances(133 mV at 10 mA cm^(-2)).Finally,we conducted density functional theory calculations to reveal the origin of such enhanced performances when the mixed 1T/2H phases were present,where phase boundary region(1T/2H heterojunction)act as a low energy pathway for H_(2)adsorption and desorption via electron accumulation effect.Moreover,presence of the Pt nanoparticles tunes the electronic states of the MoSe_(2)based catalyst,resulting in the enhanced HER activity at heterointerface of 1T/2H MoSe_(2) while facilitating the hydrogen adsorption and desorption process providing a low energy pathway for HER.These results provide new insight on atomic level understanding of the MoSe_(2) based catalyst for HER application.展开更多
基金supported by the National Natural Science Foundation of China(project no.42375192)supported by the National Natural Science Foundation of China(project no.42030608)+3 种基金China Meteorological Administration Climate Change Special Program(CMA-CCSPproject no.QBZ202315)supported by the National Research,Development and Innovation Fund,project no.OTKA-FK 142702the János Bolyai Research Scholarship。
文摘The fundamental scientific and engineering knowledge concerning the solar power curve,which maps solar irradiance and other auxiliary meteorological variables to photovoltaic output power,has been gathered and put forward in the preceding tutorial review.Despite the many pages of that review,it was incomplete in the sense that it did not elaborate on the applications of this very important tool of solar energy meteorology.Indeed,solar power curves are ubiquitously needed in a broad spectrum of solar forecasting and solar resource assessment tasks.Hence,this tutorial review should continue from where it left off and present examples concerning the usage of solar power curves.In a nutshell,this tutorial review,together with the preceding one,should elucidate how surface shortwave radiation data,be they ground-based,satelliteretrieved,or model-output,are bridged to various power system operations via solar power curves.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)grant funded by the Korea government(MOTIE)(RS-2023-00303581,Multiscale Simulation-Driven Development of Cost-Effective and Stable Aqueous Zn Ion Battery with Energy Density of 110 Wh/L for Energy Storage Systems:A Korea-USA Collaboration)。
文摘Over the years,zinc-ion batteries(ZIBs)have attracted attention as a promising next-generation energy storage technology because of their excellent safety,long cycling performance,eco-friendliness,and high-power density.However,issues,such as the corrosion and dissolution of the Zn anode,limited wet-tability,and lack of sufficient nucleation sites for Zn plating,have limited their practical application.The introduction of a protective layer comprising of tellurium(Te)nanobelts onto the surface of Zn anode has emerged as a promising approach to overcome these limitations and improve the electrochemical behav-ior by enhancing the safety and wettability of ZIBs,as well as providing numerous nucleation sites for Zn plating.In the presence of a Te-based protective layer,the energy power density of the surface-engineered Zn anode improved significantly(ranging from 310 to 144 W h kg^(-1),over a power density range of 270 to 1,800 W kg^(-1)),and the lifespan capability was extended.These results demonstrate that the proposed strategy of employing Te nanobelts as a protective layer holds great promise for enhancing the energy storage performance of zIBs,making them even more attractive as a viable energy storage solution forthefuture.
基金supported by the Samsung Research Funding&Incubation Center of Samsung Electronics under Project No.SRFC-MA2402-05supported by the KENTECH Center for Shared Research Facilities。
文摘The performance degradation of micro light-emitting diodes(micro-LEDs)is closely associated with the deterioration of sidewall passivation layers under prolonged electrical bias.We investigate reliability improvements in 20μm×20μm InGaN/GaN blue micro-LEDs by suppressing the formation of an unstable interfacial layer during sidewall passivation.SiO_(2)is deposited on the etched mesa sidewalls using either Sputtering or plasma-enhanced chemical vapor deposition(PECVD).Comparative analysis reveals that PECVD-passivated devices experience more severe performance degradation,primarily due to the increased leakage current.After 100 h of accelerated aging,external quantum efficiency decreases by 44%in PECVD-passivated samples,whereas Sputter-passivated devices exhibit only an11%reduction.This discrepancy is attributed to the formation of a thicker and chemically unstable gallium oxynitride(Ga-O_(X)-N_(1-X))interfacial layer at the SiO_(2)∕GaN-based interface,which facilitates the generation of sidewall defects.Suppressing the formation of this interlayer enhances the crystallinity and structural stability of the passivation layer,thereby mitigating the activation of point defects.Notably,Sputter deposition is more effective in minimizing the formation of Ga-O-N interlayer.These findings emphasize the critical role of achieving low-defect-density sidewall passivation to improve the reliability of micro-LEDs for next-generation high-resolution display applications.
基金the Scientific Research Projects Unit of Erciyes University under contract no:FDS-2022-11532 and FOA-2025-14773.
文摘This paper examines a model that combines vortex generators and leading-edge tubercles for controlling the laminar separation bubble(LSB)over an airfoil at low Reynolds numbers(Re).This new concept of passive flow control technique utilizing a tubercle and vortex generator(VG)close to the leading edge was analyzed numerically for a NACA0015 airfoil.In this study,the Shear Stress Transport(SST)turbulence model was employed in the numerical modelling.Numerical modelling was completed using the ANSYS-Fluent 18.2 solver.Analyses were conducted to investigate the flow pattern and understand the underlying LSB control phenomena that enabled the new passive flow control method to provide this significant performance benefit.The findings indicated that the new concept of passive flow control technique suppressed the formation of an LSB at the suction surface of the NACA0015 airfoil,resulting in a higher lift coefficient and improved aerodynamic performance.Improvements in LSB dynamics and aerodynamic performance through the passive flow control method lead to increased energy output and enhanced stability.
基金supported by the Scientific and Technological Research Council of Turkey(TüBTAK)under Grant 112T570
文摘Preparation of hierarchically porous, heteroatom-rich nanostructured carbons through green and scalable routes plays a key role for practical energy storage applications. In this work, naturally abundant lignocellulosic agricultural waste with high initial oxygen content, hazelnut shells, were hydrothermally carbonized and converted into nanostructured ‘hydrochar’. Environmentally benign ceramic/magnesium oxide（Mg O） templating was used to introduce porosity into the hydrochar. Electrochemical performance of the resulting material（HM700） was investigated in aqueous solutions of 1 M H;SO;, 6 M KOH and1 M Na;SO;, using a three-electrode cell. HM700 achieved a high specific capacitance of 323.2 F/g in 1 M H;SO;（at 1 A/g,-0.3 to 0.9 V vs. Ag/Ag Cl） due to the contributions of oxygen heteroatoms（13.5 wt%）to the total capacitance by pseudo-capacitive effect. Moreover, a maximum energy density of 11.1 Wh/kg and a maximum power density of 3686.2 W/kg were attained for the symmetric supercapacitor employing HM700 as electrode material（1 M Na;SO;, E = 2 V）, making the device promising for green supercapacitor applications.
基金supported by the Basic Science Research Program through the National Research Foundation of Korea (NRF) (Grant Nos.2018R1A6A1A03024334,2019R1A2C1007637,2021M3I3A1082880,2021R1I1A1A01044174)the Basic Science Research Capacity Enhancement Project through Korea Basic Science Institute (Grant No.2019R1A6C1010024)。
文摘The discovery of efficient,selective,and stable electrocatalysts can be a key point to produce the largescale chemical fuels via electrochemical CO_(2) reduction(ECR).In this study,an earth-abundant and nontoxic ZnO-based electrocatalyst was developed for use in gas-diffusion electrodes(GDE),and the effect of nitrogen(N)doping on the ECR activity of ZnO electrocatalysts was investigated.Initially,a ZnO nanosheet was prepared via the hydrothermal method,and nitridation was performed at different times to control the N-doping content.With an increase in the N-doping content,the morphological properties of the nanosheet changed significantly,namely,the 2D nanosheets transformed into irregularly shaped nanoparticles.Furthermore,the ECR performance of Zn O electrocatalysts with different N-doping content was assessed in 1.0 M KHCO_(3) electrolyte using a gas-diffusion electrode-based ECR cell.While the ECR activity increased after a small amount of N doping,it decreased for higher N doping content.Among them,the N:ZnO-1 h electrocatalysts showed the best CO selectivity,with a faradaic efficiency(FE_(CO))of 92.7%at-0.73 V vs.reversible hydrogen electrode(RHE),which was greater than that of an undoped Zn O electrocatalyst(FE_(CO)of 63.4%at-0.78 V_(RHE)).Also,the N:ZnO-1 h electrocatalyst exhibited outstanding durability for 16 h,with a partial current density of-92.1 mA cm^(-2).This improvement of N:ZnO-1 h electrocatalyst can be explained by density functional theory calculations,demonstrating that this improvement of N:ZnO-1 h electrocatalyst comes from(ⅰ)the optimized active sites lowering the free energy barrier for the rate-determining step(RDS),and(ⅱ)the modification of electronic structure enhancing the electron transfer rate by N doping.
文摘In this paper, neutronic analysis in a laser fusion inertial confinement fusion fission energy （LIFE） engine fuelled plutonium and minor actinides using a MCNP codes was investigated. LIFE engine fuel zone contained 10 vol% TRISO particles and 90 vol% natural lithium coolant mixture. TRISO fuel compositions have Mod①： reactor grade plutonium （RG-Pu）, Mod②： weapon grade plutonium （WG-Pu） and Mod③： minor actinides （MAs）. Tritium breeding ratios （TBR） were computed as 1.52, 1.62 and 1.46 for Mod（D, Mod② and Mod③, respectively. The operation period was computed as ~21 years when the reference TBR 〉 1.05 for a self- sustained reactor for all investigated cases. Blanket energy multiplication values （M） were calculated as 4.18, 4.95 and 3.75 for Mod①, Mod② and Mod③, respectively. The bumup （BU） values were obtained as ~1230, ~1550 and ~1060 GWd tM-1, respectively. As a result, the higher BU were provided with using TRISO particles for all cases in LIFE engine.
基金supported by the National Natural Science Foundation of China(Grant No.52102266,12204167)the China Postdoctoral Science Foundation(2020M680861)+4 种基金the support from the Department of Science and Technology-Science and Engineering Research Board(DST-SERB),Government of India(project no.SRG/2020/000258)CSIR-Indian Institute of Chemical Technology,Hyderabadsupported by the National Research Foundation of Korea(NRF)grant funded by the Korea government(MSIT)(No.2022R1A5A1032539,2022R1C1C1008282)Industrial Strategic Technology Development Program-Alchemist Project(1415180859,Chiral perovskite LED smart contact lens based hyper vision metaverse)funded by the Ministry of Trade,Industry&Energy(MOTIE,Korea)Korea Evaluation Institute of Industrial Technology(KEIT,Korea).
文摘As lead halide perovskite(LHP)semiconductors have shown tremendous promise in many application fields,and particularly made strong impact in the solar photovoltaic area,low dimensional quantum dot forms of these perovskites are showing the potential to make distinct marks in the fields of electronics,optoelectronics and photonics.The so-called perovskite quantum dots(PQDs)not only possess the most important features of LHP materials,i.e.,the unusual high defect tolerance,but also demonstrate clear quantum size effects,along with exhibiting desirable optoelectronic properties such as near perfect photoluminescent quantum yield,multiple exciton generation and slow hot-carrier cooling.Here,we review the advantageous properties of these nanoscale perovskites and survey the prospects for diverse applications which include lightemitting devices,solar cells,photocatalysts,lasers,detectors and memristors,emphasizing the distinct superiorities as well as the challenges.
基金supported in part by an International Research Partnership“Electrical Engineering-Thai French Research Center(EE-TFRC)”under the project framework of the Lorraine Universitéd’Excellence(LUE)in cooperation between Universitéde Lorraine and King Mongkut’s University of Technology North Bangkok and in part by the National Research Council of Thailand(NRCT)under Senior Research Scholar Program under Grant No.N42A640328.
文摘In this paper,the installation of energy storage systems(EES)and their role in grid peak load shaving in two echelons,their distribution and generation are investigated.First,the optimal placement and capacity of the energy storage is taken into consideration,then,the charge-discharge strategy for this equipment is determined.Here,Genetic Algorithm(GA)and Particle Swarm Optimization(PSO)are used to calculate the minimum and maximum load in the network with the presence of energy storage systems.The energy storage systems were utilized in a distribution system with the aid of a peak load shaving approach.Ultimately,the battery charge-discharge is managed at any time during the day,considering the load consumption at each hour.The results depict that the load curve reached a constant state by managing charge-discharge with no significant changes.This shows the significance of such matters in terms of economy and technicality.
文摘Uttarakhand state comes under special category state where approximately 69.45% population lived in rural area under the population density with varied range of 37 to 607 persons per sq.km. Although Uttarakhand is having per capita consumption of 1112.29 kWh which is higher than national average per capita consumption of 779 kWh as till date, but remote communities, villages are not able to access clean, cheep and good quality of energy due to uneven terrain, lack of proper transmission & distribution lines [1]. 100% villages are electrified under the RGGVY scheme as per the Ministry of Power Government of India, but due to poor loading of transformer, lack of grid infrastructure and natural calamities, remote house owners are not able to get good quality of power thus affect the livelihood and source of income generation in various means [2]. As Uttarakhand state having future plans to be make state energy sufficient and energy access to all by year 2016-2017, so major ground level initiative have been taken by Government of Uttarakhand. The government of Uttarakhand has incorporated innovative business model to provide good quality of power with non-conventional energy source. Under the initiative invlovement of local people and village level, panchayats have ownership and responsibility to operate these clean energy business model to improve livelihood in remote hilly places of Uttarakhand. Under this analysis, five different type of community models are categorized as Community 1, Community 2, Community 3, Standalone 1 & Standalone 2 for rural &remote communities based on number of unclustered households with the distance covered between 200 m to 20 km, and electrical loads i.e. lighting, fan, mobile chargers, television along with time of day energy consumption patterns. These community models are for remote hilly location where grid integration and distribution lines are not feasible to built due to hilly terrain, low soil strength and huge expenses for expanding power cables for supplying good quality power. The preliminary studies and simulations has been done in HOMER tool by considering the various composite source of power, i.e. Solar PV with battery bank, Solar PV with battery Bank & Generator, and Solar PV along with DG. These three hybrid source of power generation with Solar PV as base source under five different community models, the techno-commercial feasibility has been analyzed in terms of load sharing proposition with Solar PV and battery, DG, Energy production through PV, load consumption per year, Excess and unmet energy monitoring, battery sizing to meet the load during nights, DG operation when the solar energy not available due to weather condition and non availability of sunshine in night. Financial feasibility has been examined in terms of levelized cost of energy, cost summary and O&M cost per year of three integrated sources of energy generation with Solar PV under each community model. Solar PV power plant , which is the best renewable source of energy to cater energy access issue in remote hilly places. The Uttarakhand receives good amout of daily average radiation level of 5.14 - 5.50 kWh/m2/day. Financial feasible community models for different hilly region based on their energy consumption need to be implemented with the help of local community by providing ownership to local people, panchayat, for it not only caters energy access issue but also provides clean, cheep, uninterruptable energy and improves livelihood standard to locals by engaging them into operation maintenance and tariff or rent collection. The study shows that Solar PV power plant with battery bank is the optimal solution considering life cycle cost of hybrid system. It is feasible due to low operation and maintenance cost, price declination of battery and Solar PV module, battery prices at time of replacement.
基金supported by the National Natural Science Foundation of China(Grant No.W2412060,22325902 and 52171215)the State Key Laboratory of Clean Energy Utilization(Open Fund Project No.ZJUCEU2023002)。
文摘Sodium-ion batteries(SIBs)have attracted significant attention in large-scale energy storage system because of their abundant sodium resource and cost-effectiveness.Layered oxide materials are particularly promising as SIBs cathodes due to their high theoretical capacities and facile synthesis.However,their practical applications are hindered by the limitations in energy density and cycling stability.The comprehensive understanding of failure mechanisms within bulk structure and at the cathode/electrolyte interface of cathodes is still lacking.In this review,the issues related to bulk phase degradation and surface degradation,such as irreversible phase transitions,cation migration,transition metal dissolution,air/moisture instability,intergranular cracking,interfacial reactions,and reactive oxygen loss,are discussed.The latest advances and strategies to improve the stability of layered oxide cathodes and full cells are provided,as well as our perspectives on the future development of SIBs.
文摘Magnesium and its alloys have gained relevance for their light-weight combined with a high value of strength-to-weight ratio,which makes them useful in fields such as aerospace,automotive as well as biomedical engineering.Unfortunately,the poor corrosion resistance of Mg-alloys limits their wide acceptance.Advanced composite coatings which are self-healing,superhydrophobic anti corrosive,and wear resistant are new synthetic materials for abating these challenges.The superimposed superhydrophobic surfaces help in minimizing their water contact,thus slowing down the electrochemical reactions on the surface of the alloys,while their self-healing characteristics autonomously aid in the repair of any induced micro-crack,defect or damage towards ensuring the metal's long-term protection.In addition,the integration of wear-resistant materials further improves the durability of coatings under mechanical stress.The most recent research efforts have been directed towards the preparation of multifunctional composites,with an emphasis on nanomaterials,functional polymers,and state-of-the-art fabrication techniques in order to take advantage of their synergistic effects.Some of the methods that have so far exhibited promising potentials in fabricating these materials include the sol-gel method,layer-by-layer assembly,and plasma treatments.However,most of the fabricated products are still faced with significant challenges ranging from long-term stability to homogeneous adhesion of the coatings and their scalability for industrial applications.This review discusses the recent progress and the relationship between corrosion inhibition and self-healing efficiencies of wear resistant polymer nanocomposite coatings.Some challenges related to optimizing coating performance were also discussed.In addition,future directions ranging from the consideration of bioinspired designs,novel hybrid nanocomposite materials,and environmentally sustainable solutions integrated with smart protective coatings were also proposed as new wave technologies that can potentially revolutionize the corrosion protection offered by Mg alloys while opening up prospects for improved performance and sustainability.
文摘Bio-cement and bio-concrete are innovative solutions for sustainable construction, aiming to reduce environmental impact while maintaining the durability and versatility of building materials. Bio-cement is an eco-friendly alternative to traditional cement, produced through Microbially Induced Calcium Carbonate Precipitation (MICP), which mimics natural biomineralization processes. This method reduces CO2 emissions and enhances the strength and durability of construction materials. Bio-concrete incorporates bio-cement into concrete, creating a self-healing material. When cracks form in bio-concrete, dormant bacteria within the material become active in the presence of water, producing limestone to fill the cracks, extending the material’s lifespan and reducing the need for repairs. The environmental impact of traditional cement production is significant, with cement generation accounting for up to 8% of global carbon emissions. Creative solutions are needed to develop more sustainable construction materials, with some efforts using modern innovations to make concrete ultra-durable and others turning to science to create affordable bio-cement. The research demonstrates the potential of bio-cement to revolutionize sustainable building practices by offering a low-energy, low-emission alternative to traditional cement while also addressing environmental concerns. The findings suggest promising applications in various construction scenarios, including earthquake-prone areas, by enhancing material durability and longevity through self-repair mechanisms.
基金supported by grants from the Human Resources Development program (Grant No.20204010600250)the Training Program of CCUS for the Green Growth (Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning (KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government (MOTIE).
文摘It is of great importance to obtain precise trace data,as traces are frequently the sole visible and measurable parameter in most outcrops.The manual recognition and detection of traces on high-resolution three-dimensional(3D)models are relatively straightforward but time-consuming.One potential solution to enhance this process is to use machine learning algorithms to detect the 3D traces.In this study,a unique pixel-wise texture mapper algorithm generates a dense point cloud representation of an outcrop with the precise resolution of the original textured 3D model.A virtual digital image rendering was then employed to capture virtual images of selected regions.This technique helps to overcome limitations caused by the surface morphology of the rock mass,such as restricted access,lighting conditions,and shading effects.After AI-powered trace detection on two-dimensional(2D)images,a 3D data structuring technique was applied to the selected trace pixels.In the 3D data structuring,the trace data were structured through 2D thinning,3D reprojection,clustering,segmentation,and segment linking.Finally,the linked segments were exported as 3D polylines,with each polyline in the output corresponding to a trace.The efficacy of the proposed method was assessed using a 3D model of a real-world case study,which was used to compare the results of artificial intelligence(AI)-aided and human intelligence trace detection.Rosette diagrams,which visualize the distribution of trace orientations,confirmed the high similarity between the automatically and manually generated trace maps.In conclusion,the proposed semi-automatic method was easy to use,fast,and accurate in detecting the dominant jointing system of the rock mass.
文摘The objective of this paper is the evaluation of business opportunities attractiveness in RER （renewable-energy resources） within a specific geographic area, and using some concepts of integrated energy-resource planning. The proposed methodology includes the main figures of economic merit evaluated to each resource assessed, the sensitivity analysis on cash flow, and recommendations of investments to each energy option assessed. A study case is applied within the northwest region of Sao Paulo State （Brazil） for those renewable-energy options. Five options of renewable-energy resources were chosen to be evaluated： three ERs （energy resources） from supply side （small hydro, wind farms and sugarcane bagasse） and two ERs from demand side （replacement of incandescent lighting by fluorescent and replacement of electric showers by central heating systems）. The conclusion is that, only two assessed ERs that have received investment grade were sugarcane biomass and fluorescent lamps replacing incandescent lamps. The rest have restriction due different reasons listed.
基金supported by grants from the Human Resources Development program(Grant No.20204010600250)the Training Program of CCUS for the Green Growth(Grant No.20214000000500)by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)funded by the Ministry of Trade,Industry,and Energy of the Korean Government(MOTIE).
文摘Three-dimensional printing(3DP)offers valuable insight into the characterization of natural rocks and the verification of theoretical models due to its high reproducibility and accurate replication of complex defects such as cracks and pores.In this study,3DP gypsum samples with different printing directions were subjected to a series of uniaxial compression tests with in situ micro-computed tomography(micro-CT)scanning to quantitatively investigate their mechanical anisotropic properties and damage evolution characteristics.Based on the two-dimensional(2D)CT images obtained at different scanning steps,a novel void ratio variable was derived using the mean value and variance of CT intensity.Additionally,a constitutive model was formulated incorporating the proposed damage variable,utilizing the void ratio variable.The crack evolution and crack morphology of 3DP gypsum samples were obtained and analyzed using the 3D models reconstructed from the CT images.The results indicate that 3DP gypsum samples exhibit mechanical anisotropic characteristics similar to those found in naturally sedimentary rocks.The mechanical anisotropy is attributed to the bedding planes formed between adjacent layers and pillar-like structures along the printing direction formed by CaSO_(4)·2H_(2)O crystals of needle-like morphology.The mean gray intensity of the voids has a positive linear relationship with the threshold value,while the CT variance and void ratio have concave and convex relationships,respectively.The constitutive model can effectively match the stress–strain curves obtained from uniaxial compression experiments.This study provides comprehensive explanations of the failure modes and anisotropic mechanisms of 3DP gypsum samples,which is important for characterizing and understanding the failure mechanism and microstructural evolution of 3DP rocks when modeling natural rock behavior.
基金funding from the European Research Council(ERC)under the European Union’s Horizon 2020 Research and Innovation Program through the Starting Grant GEoREST(grant agreement No.801809)support by MICIU/AEI/10.13039/501100011033 and by"European Union Next Generation EU/PRTR"through the‘Ramón y Cajal’fellowship(reference RYC2021-032780-I)+9 种基金funding by MICIU/AEI/10.13039/501100011033 and by“ERDF,EU”through the‘HydroPoreII’project(reference PID2022-137652NBC44)support by the Institute for Korea Spent Nuclear Fuel(iKSNF)National Research Foundation of Korea(NRF)grant funded by the Korea government(Ministry of Science and ICT,MSIT)(2021M2E1A1085196)support by the Swedish Radiation Safety(SSM),Swedish Transport Administration(Trafikverket),Swedish Rock Engineering Foundation(BeFo),and Nordic Energy Research(Grant 187658)supported by the US Department of Energy(DOE),the Officeof Nuclear Energy,Spent Fuel and Waste Science and Technology Campaign,and by the US Department of Energy(DOE),the Office of Basic Energy Sciences,Chemical Sciences,Geosciences,and Biosciences Division both under Contract Number DE-AC02-05CH11231 with Lawrence Berkeley National Laboratorysupport from the US National Science Foundation(grant CMMI-2239630)funding from the European Research Council(ERC)under the European Union’s Horizon 2020 research and innovation programme(grant agreement No.101002507)the UK Natural Environment Research Council(NERC)for funding SeisGreen Project(Grant No.NE/W009293/1)which supported this workthe Royal Society UK for supporting this research through fellowship UF160443IMEDEA is an accredited"Maria de Maeztu Excellence Unit"(Grant CEX2021-001198,funded by MICIU/AEI/10.13039/501100011033).
文摘Coupled thermo-hydro-mechanical(THM)processes in fractured rock are playing a crucial role in geoscience and geoengineering applications.Diverse and conceptually distinct approaches have emerged over the past decades in both continuum and discontinuum perspectives leading to significant progress in their comprehending and modeling.This review paper offers an integrated perspective on existing modeling methodologies providing guidance for model selection based on the initial and boundary conditions.By comparing various models,one can better assess the uncertainties in predictions,particularly those related to the conceptual models.The review explores how these methodologies have significantlyenhanced the fundamental understanding of how fractures respond to fluid injection and production,and improved predictive capabilities pertaining to coupled processes within fractured systems.It emphasizes the importance of utilizing advanced computational technologies and thoroughly considering fundamental theories and principles established through past experimental evidence and practical experience.The selection and calibration of model parameters should be based on typical ranges and applied to the specificconditions of applications.The challenges arising from inherent heterogeneity and uncertainties,nonlinear THM coupled processes,scale dependence,and computational limitations in representing fieldscale fractures are discussed.Realizing potential advances on computational capacity calls for methodical conceptualization,mathematical modeling,selection of numerical solution strategies,implementation,and calibration to foster simulation outcomes that intricately reflectthe nuanced complexities of geological phenomena.Future research efforts should focus on innovative approaches to tackle the hurdles and advance the state-of-the-art in this critical fieldof study.
基金supported by National Natural Science Foundation of China(Nos.52170030,52200049)China Postdoctoral Science Foundation(No.2022TQ0089)+2 种基金State Key Laboratory of Urban-rural Water Resource and Environment(Harbin Institute of Technology)(No.2024TS28)Young Scientist Studio of Harbin Institute of TechnologyFundamental Research Funds for the Central Universities。
文摘Ice-assisted synthesis is a facile,effective,and eco-friendly approach for preparing environmental functional materials.The quasi-liquid layer(QLL)or ice grain boundary(IGB)of the ice provides ideal interface-confined environments for preparing two-dimensional(2D)sheet-like,three-dimensional(3D)hierarchical porous,polymeric hybrid,and atomically dispersed materials via the in-situ interfacial chemical reactions.Ice-templating physical pretreatment allows directional assembly of preformed materials,sheet exfoliation from bulk materials,transfer or cleaning of 2D materials,uniform dispersion of precursors,and self-assembly of nanoparticles.Additionally,the ice-melting process offers a novel way to prepare nanomaterials of uniform size due to the ultraslow release of reactants from the ice crystals.Furthermore,environmental applications of ice-assisted synthetic materials have been concluded.Advanced membrane materials synthesized based on ice chemistry exhibit superior water permeance,ion selectivity,and disinfection.Also,ice-assisted synthesis has innate advantages for designing environmental functional catalysts or adsorbents dedicated to environmental remediation.Finally,the challenges of the current progress in this field are discussed.
基金supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government(MSIT)(RS2024-00342112)the Korea Institute of Energy Technology Evaluation and Planning(KETEP) grant funded by the Korea government (MOTIE) (RS-2023-00303581, Multiscale Simulation-Driven Development of Cost-Effective and Stable Aqueous Zn Ion Battery with Energy Density of 110 Wh/L for Energy Storage Systems: A Korea-USA Collaboration)+1 种基金the Technology Innovation Program (RS-2024-00429384) funded by the Ministry of Trade, Industry & Energy(MOTIE, Korea)the Technology Innovation Program (RS-2024-00470022) funded by the Ministry of Trade, Industry & Energy(MOTIE, Korea)。
文摘In aqueous zinc-ion batteries(ZIBs),the separator plays a critical role beyond merely acting as an ionicconductive medium-it directly influences Zn^(2+) flux uniformity,desolvation characteristics,and overall electrochemical reversibility.Therefore,addressing the inherent limitations of conventional separator materials-such as non-uniform ion transport and structural deformation-and introducing surface functionalities are critical for enhancing electrochemical performance.In this study,a polyvinylidene fluoride(PVDF) layer was coated onto the surface of a glass fiber(GF) separator to suppress structural deformation caused by prolonged electrolyte exposure.Furthermore,plasma treatment introduced hydrophilic functional groups onto the PVDF surface,enabling hydrogen bonding with water molecules and suppressing H_(2)O-induced side reactions.An MnO_(2)‖Zn full cell using the FP@GF separator retained ~98 % of its initial capacity after 350 cycles.Even after extensive charge/discharge cycling,the interface between the separator and Zn anode remained clean.Moreover,the MnO_(2)‖Zn full cell maintained a capacity exceeding 101 mAh g^(-1) at 2.0 C after 30 days of storage,approximately twice that of its bare-GF-based counterpart.Thus,this study demonstrates a strategy to overcome the mechanical shortcomings of GF separators and suppress water-induced parasitic reactions in aqueous electrolytes,substantially enhancing the longterm stability of GF-based ZIBs.
基金supported by the GRRC program of Gyeonggi Province(GRRC Sungkyunkwan 2023-B01)the support of Korea Institute of Energy Technology Evaluation and Planning(KETEP)and the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea(No.20224000000100)the research support of KENTECH foundation research grant supported by MOTIE。
文摘Metal dichalcogenide-based 2D materials,gained considerable attention recently as a hydrogen evolution reaction(HER)electrocatalyst.In this work,we synthesized MoSe_(2)-based electrocatalyst via hydrothermal route with varying phase contents(1T/2H)and respective HER performances were evaluated under the acidic media(0.5 M H_(2)SO_(4)),where best HER performance was obtained from the sample consisting of mixed 1T/2H phases,which was directly grown on a carbon paper(167 mV at10 mA cm^(-2))Furthermore,HER performance of electrocatalyst was further improved by in-situ electrodeposition of Pt nanoparticles(0.15 wt%)on the MoSe_(2) surface,which lead to significant enhancement in the HER performances(133 mV at 10 mA cm^(-2)).Finally,we conducted density functional theory calculations to reveal the origin of such enhanced performances when the mixed 1T/2H phases were present,where phase boundary region(1T/2H heterojunction)act as a low energy pathway for H_(2)adsorption and desorption via electron accumulation effect.Moreover,presence of the Pt nanoparticles tunes the electronic states of the MoSe_(2)based catalyst,resulting in the enhanced HER activity at heterointerface of 1T/2H MoSe_(2) while facilitating the hydrogen adsorption and desorption process providing a low energy pathway for HER.These results provide new insight on atomic level understanding of the MoSe_(2) based catalyst for HER application.
