Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and posse...Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and possess conductivity. The present study improved the characteristics of a transparent conductive film that was made of poly(3, 4 ethylenedioxythiophene):poly(styrenesul-fonate) (PEDOT:PSS), an organic conductive material, and that had been prepared using ink-jet printing. To improve the resistance value and visible light transmittance of the film, the film substrate was first cleaned with ultraviolet/ozone treatment, and then the film was annealed after it was deposited on the substrate and dipped into a polar solvent. Consequently, the resistance value of the thin film decreased. However, the surface state of the film changed according to the treatment method and affected its visible light transmittance. Thus, the surface state of the film substrate, the annealing temperature after film deposition, and the dipping treatment with a polar solvent influenced the characteristics of a thin film.展开更多
Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO)...Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO) thin film, which has been generally used as a material for a transparent conductive film, has problems, such as fragility to bending stress and depletion of the resource. The present study used poly(3, 4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS), an organic electroconductive material, and examined the improvement in the resistance value and visible light transmittance of a transparent conductive film produced using the ink-jet method. In previous studies, we reported that, to improve the resistance value and visible light transmittance of a thin film, it was effective to clean the film substrate with ultraviolet/ozone (UV/O<sub>3</sub>) treatment, anneal the film after it was deposited on the substance, and dip the annealed film into a polar solvent. Focusing on the thin film processing between printing operations, the present study improved resistance value and visible light transmittance by examining both the application methods of a polar solvent and the annealing time between printing operations. As a result, the resistance value and visible light transmittance of a PEDOT:PSS thin film were 390.4 Ω and 86.6%, respectively. This film was obtained by applying a polar solvent and performing annealing for 30 min between printing operations. The printing was performed three times.展开更多
For application as a novel ablation therapy of human cancer,the heating property of a needle-shaped Mg-ferrite prepared by a sintering technique was studied in a high-frequency induction field at 370 kHz.When inserted...For application as a novel ablation therapy of human cancer,the heating property of a needle-shaped Mg-ferrite prepared by a sintering technique was studied in a high-frequency induction field at 370 kHz.When inserted into cylindrical clay,the increase in temperature(Δ7)was 31.2℃ for the specimen with a 1.5 mm diameter,while the 1.0mm diameter specimen exhibited a ΔT value of 15.7℃ after the induction time of 1200s.The ΔT exhibited a high value of 57.9℃ during the simultaneous insertion of 3 1.5mm diameter specimens.In the computer simulation images, the relatively lower magnetic flux density and concurrent neghgibly low current density were observed from the surface to the internal regions,being different from the behavior of a ferromagnetic Ni-rod with the same size.展开更多
Flexible devices manufactured using printed electronics have attracted the attention of many researchers. A high-performance transparent conductive film exhibiting high flexibility and elasticity is expected to be dev...Flexible devices manufactured using printed electronics have attracted the attention of many researchers. A high-performance transparent conductive film exhibiting high flexibility and elasticity is expected to be developed because of its need for the creation of flexible devices. An indium tin oxide (ITO) thin film, which has generally been used, has weaknesses such as fragility to bending stress and depletion of the resource. This study focused on poly (3, 4-ethy-lenedioxythiophene)/poly (styrenesulfonate) (PEDOT:PSS), a conductive polymer material, and examined improvement in the resistivity and transmittance of the transparent conductive film produced using an inkjet method. The present study improved the electrical and optical characteristics of the thin film by examining the annealing temperature between printing operations and the application method of a polar solvent. As a result, the resistivity and transmittance of a PEDOT:PSS thin film were 1.49 × 10-3 Ω·cm and 89.2%, respectively. This film was obtained by annealing at 90°C for 30 min and applying a polar solvent, using an inkjet printer, between printing operations. The printing was performed three times.展开更多
文摘Flexible devices produced using organic materials have attracted the attention of many researchers. Important components of these flexible devices include transparent electrodes, which transmit visible light and possess conductivity. The present study improved the characteristics of a transparent conductive film that was made of poly(3, 4 ethylenedioxythiophene):poly(styrenesul-fonate) (PEDOT:PSS), an organic conductive material, and that had been prepared using ink-jet printing. To improve the resistance value and visible light transmittance of the film, the film substrate was first cleaned with ultraviolet/ozone treatment, and then the film was annealed after it was deposited on the substrate and dipped into a polar solvent. Consequently, the resistance value of the thin film decreased. However, the surface state of the film changed according to the treatment method and affected its visible light transmittance. Thus, the surface state of the film substrate, the annealing temperature after film deposition, and the dipping treatment with a polar solvent influenced the characteristics of a thin film.
文摘Recently, a high-performance and low-priced transparent conductive film has been expected to be developed because flexible devices produced using organic materials have been actively studied. An indium tin oxide (ITO) thin film, which has been generally used as a material for a transparent conductive film, has problems, such as fragility to bending stress and depletion of the resource. The present study used poly(3, 4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT:PSS), an organic electroconductive material, and examined the improvement in the resistance value and visible light transmittance of a transparent conductive film produced using the ink-jet method. In previous studies, we reported that, to improve the resistance value and visible light transmittance of a thin film, it was effective to clean the film substrate with ultraviolet/ozone (UV/O<sub>3</sub>) treatment, anneal the film after it was deposited on the substance, and dip the annealed film into a polar solvent. Focusing on the thin film processing between printing operations, the present study improved resistance value and visible light transmittance by examining both the application methods of a polar solvent and the annealing time between printing operations. As a result, the resistance value and visible light transmittance of a PEDOT:PSS thin film were 390.4 Ω and 86.6%, respectively. This film was obtained by applying a polar solvent and performing annealing for 30 min between printing operations. The printing was performed three times.
基金Item Sponsored by a Grant-in-Aid from Ministry of Education,Science,Sports and Culture of Japan[No.23500559:Naohara T]
文摘For application as a novel ablation therapy of human cancer,the heating property of a needle-shaped Mg-ferrite prepared by a sintering technique was studied in a high-frequency induction field at 370 kHz.When inserted into cylindrical clay,the increase in temperature(Δ7)was 31.2℃ for the specimen with a 1.5 mm diameter,while the 1.0mm diameter specimen exhibited a ΔT value of 15.7℃ after the induction time of 1200s.The ΔT exhibited a high value of 57.9℃ during the simultaneous insertion of 3 1.5mm diameter specimens.In the computer simulation images, the relatively lower magnetic flux density and concurrent neghgibly low current density were observed from the surface to the internal regions,being different from the behavior of a ferromagnetic Ni-rod with the same size.
文摘Flexible devices manufactured using printed electronics have attracted the attention of many researchers. A high-performance transparent conductive film exhibiting high flexibility and elasticity is expected to be developed because of its need for the creation of flexible devices. An indium tin oxide (ITO) thin film, which has generally been used, has weaknesses such as fragility to bending stress and depletion of the resource. This study focused on poly (3, 4-ethy-lenedioxythiophene)/poly (styrenesulfonate) (PEDOT:PSS), a conductive polymer material, and examined improvement in the resistivity and transmittance of the transparent conductive film produced using an inkjet method. The present study improved the electrical and optical characteristics of the thin film by examining the annealing temperature between printing operations and the application method of a polar solvent. As a result, the resistivity and transmittance of a PEDOT:PSS thin film were 1.49 × 10-3 Ω·cm and 89.2%, respectively. This film was obtained by annealing at 90°C for 30 min and applying a polar solvent, using an inkjet printer, between printing operations. The printing was performed three times.
