Agricultural waste is a potentially interesting resource due to the compounds present.In this study,cellulose was extracted from corn stalks(Zea mays)and subsequently converted into cellulose acetate(CA).Before the ex...Agricultural waste is a potentially interesting resource due to the compounds present.In this study,cellulose was extracted from corn stalks(Zea mays)and subsequently converted into cellulose acetate(CA).Before the extraction process,the waste sample was characterized by pH,moisture,ash,protein content,total reducing sugars(TRS),carbohydrates,cellulose,hemicellulose,and lignin.Acid and alkaline hydrolysis were performed with different reagents,concentrations,and extraction times.Sulfuric acid(H_(2)SO_(4))and acetic acid(CH_(3)COOH)were used in the acid hydrolysis,while sodium hydroxide(NaOH)was used in the alkaline hydrolysis.Three concentrations(0.62,1.25,2.5)%and two reaction times(60,120)min were established.An ANOVA was performed on the hydrolysis results to determine the existence of significant differences.The extracted cellulose was revalued by acetylation,and finally,the CA was characterized by Fourier Transform Infrared Spectroscopy(FT-IR)spectroscopy.The highest cellulose extraction yield was obtained by alkaline hydrolysis,with an extraction time of 120 min and a yield of 65%.The statistical analysis indicated that the reagent used,its concentration,reaction time,and their interaction significantly affect the process yield.After obtaining CA and performing an infrared analysis of the compound’s structure,it was determined that the byproduct corresponds to CA,demonstrating the possibility of revaluing the waste through the studied process.Future studies could improve the results obtained here to promote the development of biobased products within a circular economy framework.展开更多
The development of catalytic materials for the recycling CO_(2) through a myriad of available processes is an attractive field,especially given the current climate change.While there is increasing publication in this ...The development of catalytic materials for the recycling CO_(2) through a myriad of available processes is an attractive field,especially given the current climate change.While there is increasing publication in this field,the reported catalysts rarely deviate from the traditionally supported metal nanoparticle morphology,with the most simplistic method of enhancement being the addition of more metals to an already complex composition.Encapsulated catalysts,especially yolk@shell catalysts with hollow voids,offer answers to the most prominent issues faced by this field,coking and sintering,and further potential for more advanced phenomena,for example,the confinement effect,to promote selectivity or offer greater protection against coking and sintering.This work serves to demonstrate the current position of catalyst development in the fields of thermal CO_(2) reforming and hydrogenation,summarizing the most recent work available and most common metals used for these reactions,and how yolk@shell catalysts can offer superior performance and survivability in thermal CO_(2) reforming and hydrogenation to the more traditional structure.Furthermore,this work will briefly demonstrate the bespoke nature and highly variable yolk@shell structure.Moreover,this review aims to illuminate the spatial confinement effect and how it enhances yolk@shell structured nanoreactors is presented.展开更多
Experimental results are presented which allow comparison of the electrochemical performance of RuO 2/Ti, Ru 0 3 Sn 0 7 O 2/Ti and Ru 0 3 V 0 7 O 2/Ti catalysts prepared on a titanium substrate by thermal decompositio...Experimental results are presented which allow comparison of the electrochemical performance of RuO 2/Ti, Ru 0 3 Sn 0 7 O 2/Ti and Ru 0 3 V 0 7 O 2/Ti catalysts prepared on a titanium substrate by thermal decomposition from respective precursors. The highest activity for chlorine evolution is observed on the Ru 0 3 V 0 7 O 2/Ti electrode, lower on Ru 0 3 Sn 0 7 O 2/Ti and least on RuO 2/Ti. Voltammograms obtained in the polarisable region are used to characterize the different electrodes. Further more an analysis of the catalytic activity and reaction kinetics of the developed electrodes in NaCl are presented.展开更多
This review presents a comprehensive techno-economic and life-cycle assessment of sustainable aviation fuel(SAF)production from biomass.The critical need for transitioning towards environmentally sustainable alternati...This review presents a comprehensive techno-economic and life-cycle assessment of sustainable aviation fuel(SAF)production from biomass.The critical need for transitioning towards environmentally sustainable alternatives for liquid fuel and aviation industry is first discussed.Key insights encompass the evolutionary progression of biofuel production from first-generation to second-generation biofuels,with a focus on utilizing non-food sources like woody biomass for enhanced sustainability.Available data from the literature on techno-economic assessments of various SAF production pathways are analyzed including production costs,conversion efficiency,and scalability.Moreover,results of lifecycle assessments associated with different SAF production pathways are presented,providing essential insights for decision-making processes.The challenges of scaling up woody biomass-based SAF production are discussed based on the assessment results,and recommendations are proposed to steer stakeholders towards a greener and more sustainable trajectory for aviation operations.展开更多
The Intergovernmental Panel on Climate Change(IPCC)recognises the pivotal role of renewable energies in the future energy system and the achievement of the zero-emission target.The implementation of renewables should ...The Intergovernmental Panel on Climate Change(IPCC)recognises the pivotal role of renewable energies in the future energy system and the achievement of the zero-emission target.The implementation of renewables should provide major opportunities and enable a more secure and decentralised energy supply system.Renewable fuels provide long-term solutions for the transport sector,particularly for applications where fuels with high energy density are required.In addition,it helps reducing the carbon footprint of these sectors in the long-term.Information on biomass characteristics feedstock is essential for scaling-up gasification from the laboratory to industrial-scale.This review deals with the transformation biogenic residues into a valuable bioenergy carrier like biomethanol as the liquid sunshine based on the combination of modified mature technologies such as gasification with other innovative solutions such as membranes and microchannel reactors.Tar abatement is a critical process in product gas upgrading since tars compromise downstream processes and equipment,for this,membrane technology for upgrading syngas quality is discussed in this paper.Microchannel reactor technology with the design of state-of-the-art multifunctional catalysts provides a path to develop decentralised biomethanol synthesis from biogenic residues.Finally,the development of a process chain for the production of(i)methanol as an intermediate energy carrier,(ii)electricity and(iii)heat for decentralised applications based on biomass feedstock flexible gasification,gas upgrading and methanol synthesis is analysed.展开更多
The sonochemical decolorization of Methylene Orange was studied using a 24 kHz Ultrasound device with a 1.4 cm diameter horn. pH, power density, the effects of pH and power density on decolorization were discussed. Th...The sonochemical decolorization of Methylene Orange was studied using a 24 kHz Ultrasound device with a 1.4 cm diameter horn. pH, power density, the effects of pH and power density on decolorization were discussed. The combined effect of radiate time, the initial concentration of dyes and the addition of Fe^2＋ on the decolorization was studied using response surface methodology. The results showed that the factorial central composite design was successfully employed for experimental design and predication of the results. AtpH = 2.8, T=30℃, power denstity= 300 W/L and Fe^2＋ of 2 mg/L, the decolorization percentage of 5 mg/L dye solution reached 96% after 60 mill ultreatment. The rate of decolorization of the dye was greatly improved in the presence of Fe^2＋. The sonolysis of the dye followed first-order kinetics.展开更多
The increasing anthropogenic emissions of greenhouse gases(GHG)is encouraging extensive research in CO_(2)utilisation.Dry reforming of methane(DRM)depicts a viable strategy to convert both CO_(2)and CH4into syngas,a w...The increasing anthropogenic emissions of greenhouse gases(GHG)is encouraging extensive research in CO_(2)utilisation.Dry reforming of methane(DRM)depicts a viable strategy to convert both CO_(2)and CH4into syngas,a worthwhile chemical intermediate.Among the different active phases for DRM,the use of nickel as catalyst is economically favourable,but typically deactivates due to sintering and carbon deposition.The stabilisation of Ni at different loadings in cerium zirconate inorganic complex structures is investigated in this work as strategy to develop robust Ni-based DRM catalysts.XRD and TPR-H2analyses confirmed the existence of different phases according to the Ni loading in these materials.Besides,superficial Ni is observed as well as the existence of a CeNiO_(3)perovskite structure.The catalytic activity was tested,proving that 10 wt.%Ni loading is the optimum which maximises conversion.This catalyst was also tested in long-term stability experiments at 600and 800℃in order to study the potential deactivation issues at two different temperatures.At 600℃,carbon formation is the main cause of catalytic deactivation,whereas a robust stability is shown at 800℃,observing no sintering of the active phase evidencing the success of this strategy rendering a new family of economically appealing CO_(2)and biogas mixtures upgrading catalysts.展开更多
Confronting the severe health threats and environmental impacts of Cr(Ⅵ) in aquatic environments demands innovative and effective remediation approaches. In this study, Graphene oxide(GO)-decorated poly(dimethyl amin...Confronting the severe health threats and environmental impacts of Cr(Ⅵ) in aquatic environments demands innovative and effective remediation approaches. In this study, Graphene oxide(GO)-decorated poly(dimethyl amino ethyl methacrylate)(PDMAEMA) brush nanocomposites(GOP1, GOP2, GOP3, and GOP4) were fabricated using atom transfer radical polymerization(ATRP) by the “graft from” method.The resulting nanocomposites were utilized for removing Cr(Ⅵ) with good adsorption performance due to the electrostatic interaction of protonated nitrogen groups in the brush chains with negatively charged particles in the solution. The kinetic model of pseudo-second-order best represented the contaminants' adsorption characteristics. The Weber-Morris model further indicated that surface adsorption and intraparticle diffusion mechanisms primarily controlled the adsorption procedure. Additionally, the Langmuir and Temkin isotherm models were found to most accurately represent the adsorption characteristics of the pollutants on the nanocomposites, and GOP4 can achieve the maximum adsorption capacity of 164.4 mg·g^(-1). The adsorbents' capacity maintains above 85% after five cycles of adsorption-desorption. The nanocomposites in this study demonstrate promising potential for eliminating Cr(Ⅵ) from aqueous solutions.展开更多
Revealing the structure evolution of interfacial active species during a dynamic catalytic process is a challenging but pivotal issue for the rational design of high-performance catalysts.Here,we successfully prepare ...Revealing the structure evolution of interfacial active species during a dynamic catalytic process is a challenging but pivotal issue for the rational design of high-performance catalysts.Here,we successfully prepare sub-nanometric Pt clusters(~0.8 nm)encapsulated within the defects of CeO_(2)nanorods via an in-situ defect engineering methodology.The as-prepared Pt@d-CeO_(2)catalyst significantly boosts the activity and stability in the water-gas shift(WGS)reaction compared to other analogs.Based on controlled experiments and complementary(in-situ)spectroscopic studies,a reversible encapsulation induced by active site transformation between the Pt^(2+)-terminal hydroxyl and Pt^(δ+)-O vacancy species at the interface is revealed,which enables to evoke the enhanced performance.Our findings not only offer practical guidance for the design of high-efficiency catalysts but also bring a new understanding of the exceptional performance of WGS in a holistic view,which shows a great application potential in materials and catalysis.展开更多
Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently d...Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.展开更多
Rechargeable aqueous zinc(Zn)-metal batteries hold great promise for next-generation energy storage systems.However,their practical application is hindered by several challenges,including dendrite formation,corrosion,...Rechargeable aqueous zinc(Zn)-metal batteries hold great promise for next-generation energy storage systems.However,their practical application is hindered by several challenges,including dendrite formation,corrosion,and the competing hydrogen evolution reaction.To address these issues,we designed and fabricated a composite protective layer for Zn anodes by integrating carbon nanotubes(CNTs)with chitosan through a simple and scalable scraping process.The CNTs ensure uniform electric field distribution due to their high electrical conductivity,while protonated chitosan regulates ion transport and suppresses dendrite formation at the anode interface.The chitosan/CNTs composite layer also facilitates smooth Zn^(2+)deposition,enhancing the stability and reversibility of the Zn anode.As a result,the chitosan/CNTs@Zn anode demonstrates exceptional cycling stability,achieving over 3000 h of plating/stripping with minimal degradation.When paired with a V_(2)O_(5)cathode,the composite-protected anode significantly improves the cycle stability and energy density of the full cell.Techno-economic analysis confirms that batteries incorporating the chitosan/CNTs protective layer outperform those with bare Zn anodes in terms of energy density and overall performance under optimized conditions.This work provides a scalable and sustainable strategy to overcome the critical challenges of aqueous Zn-metal batteries,paving the way for their practical application in next-generation energy storage systems.展开更多
A laboratory-scale reaction-crystallization process of struvite synthesis from diluted water solution of Mg^2＋, NH^＋ 4 and PO3- ions was studied. The research covered the tests of two original constructions of conti...A laboratory-scale reaction-crystallization process of struvite synthesis from diluted water solution of Mg^2＋, NH^＋ 4 and PO3- ions was studied. The research covered the tests of two original constructions of continuous jet-pump Draft Tube Magma （DTM）-type crystallizers with internal circulation of suspension （upward/downward）. Interactions between constructional, hydrodynamic and kinetic factors were established and discussed. Nucleation and linear growth rates of struvite crystals were calculated on the basis of population density distribution. Kinetic model of idealized Mixed Suspension Mixed Product Removal （MSMPR） crystallizer considering the size-dependent growth mechanism was applied （Rojkowski hyperbolic equation）. For comparison purposes the kinetic data corre- sponded to a simpler, continuous draft tube-type crystallizer equipped with propeller agitator were analyzed. It was concluded that crystal product of larger size was withdrawn from the jet-pump DTM crystallizer of the descending flow of suspension in a mixing chamber.展开更多
Using the technique of microemulsion polymerization with nano-reactor, dysprosium ferrite/polyacrylamide magnetic composite microsphere was prepared by one-step method in a single inverse microemulsion. The structure,...Using the technique of microemulsion polymerization with nano-reactor, dysprosium ferrite/polyacrylamide magnetic composite microsphere was prepared by one-step method in a single inverse microemulsion. The structure, average particle size, morphology of composite microsphere were characterized by FTIR, XRD, TEM and TGA. The magnetic responsibility of composite microsphere was also investigated. The results indicate that the magnetic composite microsphere possess high magnetic responsibility and suspension stability.展开更多
The performance of CeO2-TiO2 photocatalyst for the photocatalytic reduction of CO2 into methanol was studied under visible light irradiation. The as-prepared catalysts were characterized for their structural, textural...The performance of CeO2-TiO2 photocatalyst for the photocatalytic reduction of CO2 into methanol was studied under visible light irradiation. The as-prepared catalysts were characterized for their structural, textural and optical properties using X-ray diffraction（XRD）, field emission scanning electron microscopy（FESEM）, X-ray photoelectron spectroscopy（XPS）, nitrogen physisorption analysis, UV-vis spectroscopy and photoluminescence（PL） spectroscopy. The characterization results indicated that the presence of CeO2 stabilized the anatase phase of TiO2, decreased its crystallite size, increased the surface area, reduced the band gap energy and lowered the rate of electron-hole pair recombination. The CeO2-TiO2 photocatalyst showed an increased methanol yield of 18.6 μmol/g under visible light irradiation, compared to the bare TiO2（6.0 μmol/g）.展开更多
The catalytic performance is highly related to the catalyst structure.Herein,a series of Ni nanoparticles supported on Y_(2)O_(3) with different morphologies were successfully synthesized via hydrothermal process scre...The catalytic performance is highly related to the catalyst structure.Herein,a series of Ni nanoparticles supported on Y_(2)O_(3) with different morphologies were successfully synthesized via hydrothermal process screening different pH environments.These Ni/Y_(2)O_(3)catalysts were applied to efficiently produce CO_(x)-free H2through ammonia decomposition.We identify a significant impact of Y_(2)O_(3)supports on nickel nanoclusters sizes and dispersion.The experimental results show that Ni/Y11 catalyst achieves 100% ammonia decomposition conversion under a gas hour space velocity(GHSV) of 12,000 ml·h^(-1)·gcat^(-1) and temperature of 650℃.Such a high level of activity over Ni/Y11 catalyst was attributed to a large specific surface area,appropriate alkalinity,and small Ni nanoparticles diameter with high dispersion.展开更多
Metal sulfides such as Bismuth sulfide(Bi2 S3) hold immense potential to be promoted as anode materials for lithium-ion batteries(LIBs),owing to their high theoretical gravimetric and volumetric capacities.However,the...Metal sulfides such as Bismuth sulfide(Bi2 S3) hold immense potential to be promoted as anode materials for lithium-ion batteries(LIBs),owing to their high theoretical gravimetric and volumetric capacities.However,the poor electrical conductivity and volume expansion during cycling hinder the practical applications of Bi2 S3.In this work,we used pyrrole and glucose as carbon source to design the surface carbon coating on the surface of Bi2 S3 particles,to improve the structural stability of Bi2 S3.Two composite materials were synthesized-Bi2 S3 coated with nitrogen doped carbon(Bi2 S3@NC),and Bi2 S3 coated with carbon(Bi2 S3@C).When used as anode active materials,both Bi2 S3@NC and Bi2 S3@C showed improved performance compared to Bi2 S3,which confirms surface carbon coating as an effective and scalable way for the modification of Bi2 S3 material.The electrode based on Bi2 S3@NC materials demonstrated higher performance than that of Bi2 S3@C,with an initial discha rge capacity of 1126.5 mA h/g,good cycling stability(500 mA h/g after 200 cycles at 200 mA/g) and excellent rate capability.Finally,Li storage and migration mechanisms in Bi2 S3 are revealed using first principle density functional theory calculations.展开更多
A systematic approach for the steady-state operation analysis of chemical processes is pro-posed.The method affords the possibility of taking operation resilience into consideration during thestage of process design.I...A systematic approach for the steady-state operation analysis of chemical processes is pro-posed.The method affords the possibility of taking operation resilience into consideration during thestage of process design.It may serve the designer as an efficient means for the initial screening ofalternative design schemes.An ideal heat integrated distillation column(HIDiC),without any reboileror condenser attached,is studied throughout this work.It has been found that among the various va-riables concerned with the ideal HIDiC,feed thermal condition appears to be the only factor exertingsignificant influences on the interaction between the top and the bottom control loops.Maximuminteraction is expected when the feed thermal condition approaches 0.5.Total number of stages andheat transfer rate are essential to the system ability of disturbance rejection.Therefore,more stagesand higher heat transfer rate ought to be preferred.But,too many stages and higher heat transfer ratemay increase the load of the展开更多
This paper reports the measurements of enthalpies of natural gas hydrates in typical natural gas mixture containing methane, ethane, propane and iso-butane at pressure in the vicinity of 2000 kPa (300 psi) and 6900 kP...This paper reports the measurements of enthalpies of natural gas hydrates in typical natural gas mixture containing methane, ethane, propane and iso-butane at pressure in the vicinity of 2000 kPa (300 psi) and 6900 kPa(1000psi). The measurements were made in a multi-cell differential scanning calorimeter using modified high pressure cells. The enthalpy of water and the enthalpy of dissociation of the gas hydrate were determined from the calorimeter response during slow temperature scanning at constant pressure. The amount of gas released from the dissociation of hydrate was determined from the pumped volume of the high pressure pump. The occupation ratio (mole ratio) of the water to gas and the enthalpy of hydrate formation are subject to uncertainty of 1.5%.The results show that the enthalpy of hydrate formation and the occupation ratio are essentially independent of pressure.展开更多
The conversion of biomass-derived products to fine chemicals and fuels is extremely important for the utilization of renewable energy sources.Water is not only a by-product formed during the hydrogenation of biomass-d...The conversion of biomass-derived products to fine chemicals and fuels is extremely important for the utilization of renewable energy sources.Water is not only a by-product formed during the hydrogenation of biomass-derived oxygenated chemicals,but also an inexpensive and nontoxic solvent.The instability of solid catalysts for aqueous-phase reactions caused by metal leaching and the collapse of a catalyst support represents a significant challenge.In this work,various catalyst stabilization strategies including the nanospace and interfacial confinements that prevent sintering and leaching of metal nanoparticles as well as modification methods for increasing the support stability are summarized and systemically discussed.In addition,feasible approaches to designing stable and efficient heterogeneous catalysts for aqueous-phase reactions are proposed.展开更多
Objective:To evaluate the antibacterial activity of essential oil from Trigonella foenumgraecum seeds powder,and identify the compounds from the extracted oil.Methods:The seeds powder of Trigonella foenum-graecum was ...Objective:To evaluate the antibacterial activity of essential oil from Trigonella foenumgraecum seeds powder,and identify the compounds from the extracted oil.Methods:The seeds powder of Trigonella foenum-graecum was subjected to Clevenger extractor.Seven strains of bacteria were used to test antibacterial activity of the extract.The activity against bacteria was tested by disk diffusion method using Whatman No.1filter paper.Gas chromatography mass spectrometry analysis was performed with an Agilent7890/5975B-gas chromatography/mass selective detector.Results:The hydrodistillation of seeds powder yielded 0.285%(v/w)of oil.Disk diffusion of the oil showed bactericidal activity against both Gram negative and Gram positive bacteria of tasted strains.The inhibition zone ranged from(8±0)mm to(15.0±0.7)mm depending on microbial strains.Gas chromatography mass spectrometry analysis showed14 different compounds.The total compounds represented 80.96%of the oil.Conclusions:The antibacterial activity is due to the effects of different biological active compounds present in the extract.Identification of the compounds may help to develop new effective antimicrobial agent(s).Further researches on purification,characterization and toxicology of the active compounds are needed.展开更多
文摘Agricultural waste is a potentially interesting resource due to the compounds present.In this study,cellulose was extracted from corn stalks(Zea mays)and subsequently converted into cellulose acetate(CA).Before the extraction process,the waste sample was characterized by pH,moisture,ash,protein content,total reducing sugars(TRS),carbohydrates,cellulose,hemicellulose,and lignin.Acid and alkaline hydrolysis were performed with different reagents,concentrations,and extraction times.Sulfuric acid(H_(2)SO_(4))and acetic acid(CH_(3)COOH)were used in the acid hydrolysis,while sodium hydroxide(NaOH)was used in the alkaline hydrolysis.Three concentrations(0.62,1.25,2.5)%and two reaction times(60,120)min were established.An ANOVA was performed on the hydrolysis results to determine the existence of significant differences.The extracted cellulose was revalued by acetylation,and finally,the CA was characterized by Fourier Transform Infrared Spectroscopy(FT-IR)spectroscopy.The highest cellulose extraction yield was obtained by alkaline hydrolysis,with an extraction time of 120 min and a yield of 65%.The statistical analysis indicated that the reagent used,its concentration,reaction time,and their interaction significantly affect the process yield.After obtaining CA and performing an infrared analysis of the compound’s structure,it was determined that the byproduct corresponds to CA,demonstrating the possibility of revaluing the waste through the studied process.Future studies could improve the results obtained here to promote the development of biobased products within a circular economy framework.
基金Financial support was provided by the Chinese Academy of Sciences–The World Academy of Sciences(CAS-TWAS)president fellowship。
文摘The development of catalytic materials for the recycling CO_(2) through a myriad of available processes is an attractive field,especially given the current climate change.While there is increasing publication in this field,the reported catalysts rarely deviate from the traditionally supported metal nanoparticle morphology,with the most simplistic method of enhancement being the addition of more metals to an already complex composition.Encapsulated catalysts,especially yolk@shell catalysts with hollow voids,offer answers to the most prominent issues faced by this field,coking and sintering,and further potential for more advanced phenomena,for example,the confinement effect,to promote selectivity or offer greater protection against coking and sintering.This work serves to demonstrate the current position of catalyst development in the fields of thermal CO_(2) reforming and hydrogenation,summarizing the most recent work available and most common metals used for these reactions,and how yolk@shell catalysts can offer superior performance and survivability in thermal CO_(2) reforming and hydrogenation to the more traditional structure.Furthermore,this work will briefly demonstrate the bespoke nature and highly variable yolk@shell structure.Moreover,this review aims to illuminate the spatial confinement effect and how it enhances yolk@shell structured nanoreactors is presented.
文摘Experimental results are presented which allow comparison of the electrochemical performance of RuO 2/Ti, Ru 0 3 Sn 0 7 O 2/Ti and Ru 0 3 V 0 7 O 2/Ti catalysts prepared on a titanium substrate by thermal decomposition from respective precursors. The highest activity for chlorine evolution is observed on the Ru 0 3 V 0 7 O 2/Ti electrode, lower on Ru 0 3 Sn 0 7 O 2/Ti and least on RuO 2/Ti. Voltammograms obtained in the polarisable region are used to characterize the different electrodes. Further more an analysis of the catalytic activity and reaction kinetics of the developed electrodes in NaCl are presented.
文摘This review presents a comprehensive techno-economic and life-cycle assessment of sustainable aviation fuel(SAF)production from biomass.The critical need for transitioning towards environmentally sustainable alternatives for liquid fuel and aviation industry is first discussed.Key insights encompass the evolutionary progression of biofuel production from first-generation to second-generation biofuels,with a focus on utilizing non-food sources like woody biomass for enhanced sustainability.Available data from the literature on techno-economic assessments of various SAF production pathways are analyzed including production costs,conversion efficiency,and scalability.Moreover,results of lifecycle assessments associated with different SAF production pathways are presented,providing essential insights for decision-making processes.The challenges of scaling up woody biomass-based SAF production are discussed based on the assessment results,and recommendations are proposed to steer stakeholders towards a greener and more sustainable trajectory for aviation operations.
基金support for this work has been obtained from the Junta de Andalucía projects with reference P20-00594 co-funded by the European Union FEDER。
文摘The Intergovernmental Panel on Climate Change(IPCC)recognises the pivotal role of renewable energies in the future energy system and the achievement of the zero-emission target.The implementation of renewables should provide major opportunities and enable a more secure and decentralised energy supply system.Renewable fuels provide long-term solutions for the transport sector,particularly for applications where fuels with high energy density are required.In addition,it helps reducing the carbon footprint of these sectors in the long-term.Information on biomass characteristics feedstock is essential for scaling-up gasification from the laboratory to industrial-scale.This review deals with the transformation biogenic residues into a valuable bioenergy carrier like biomethanol as the liquid sunshine based on the combination of modified mature technologies such as gasification with other innovative solutions such as membranes and microchannel reactors.Tar abatement is a critical process in product gas upgrading since tars compromise downstream processes and equipment,for this,membrane technology for upgrading syngas quality is discussed in this paper.Microchannel reactor technology with the design of state-of-the-art multifunctional catalysts provides a path to develop decentralised biomethanol synthesis from biogenic residues.Finally,the development of a process chain for the production of(i)methanol as an intermediate energy carrier,(ii)electricity and(iii)heat for decentralised applications based on biomass feedstock flexible gasification,gas upgrading and methanol synthesis is analysed.
文摘The sonochemical decolorization of Methylene Orange was studied using a 24 kHz Ultrasound device with a 1.4 cm diameter horn. pH, power density, the effects of pH and power density on decolorization were discussed. The combined effect of radiate time, the initial concentration of dyes and the addition of Fe^2＋ on the decolorization was studied using response surface methodology. The results showed that the factorial central composite design was successfully employed for experimental design and predication of the results. AtpH = 2.8, T=30℃, power denstity= 300 W/L and Fe^2＋ of 2 mg/L, the decolorization percentage of 5 mg/L dye solution reached 96% after 60 mill ultreatment. The rate of decolorization of the dye was greatly improved in the presence of Fe^2＋. The sonolysis of the dye followed first-order kinetics.
基金supported by grant PID2019-108502RJ-I00 and grant IJC2019-040560-I both funded by MCIN/AEI/10.13039/501100011033RYC2018-024387-I funded by MCIN/AEI/10.13039/501100011033 and by ESF Investing in your future。
文摘The increasing anthropogenic emissions of greenhouse gases(GHG)is encouraging extensive research in CO_(2)utilisation.Dry reforming of methane(DRM)depicts a viable strategy to convert both CO_(2)and CH4into syngas,a worthwhile chemical intermediate.Among the different active phases for DRM,the use of nickel as catalyst is economically favourable,but typically deactivates due to sintering and carbon deposition.The stabilisation of Ni at different loadings in cerium zirconate inorganic complex structures is investigated in this work as strategy to develop robust Ni-based DRM catalysts.XRD and TPR-H2analyses confirmed the existence of different phases according to the Ni loading in these materials.Besides,superficial Ni is observed as well as the existence of a CeNiO_(3)perovskite structure.The catalytic activity was tested,proving that 10 wt.%Ni loading is the optimum which maximises conversion.This catalyst was also tested in long-term stability experiments at 600and 800℃in order to study the potential deactivation issues at two different temperatures.At 600℃,carbon formation is the main cause of catalytic deactivation,whereas a robust stability is shown at 800℃,observing no sintering of the active phase evidencing the success of this strategy rendering a new family of economically appealing CO_(2)and biogas mixtures upgrading catalysts.
基金the Qatar National Research Fund for funding this work through NPRP(10-0127-170270,acknowledged under the grant code KK-2018-008).
文摘Confronting the severe health threats and environmental impacts of Cr(Ⅵ) in aquatic environments demands innovative and effective remediation approaches. In this study, Graphene oxide(GO)-decorated poly(dimethyl amino ethyl methacrylate)(PDMAEMA) brush nanocomposites(GOP1, GOP2, GOP3, and GOP4) were fabricated using atom transfer radical polymerization(ATRP) by the “graft from” method.The resulting nanocomposites were utilized for removing Cr(Ⅵ) with good adsorption performance due to the electrostatic interaction of protonated nitrogen groups in the brush chains with negatively charged particles in the solution. The kinetic model of pseudo-second-order best represented the contaminants' adsorption characteristics. The Weber-Morris model further indicated that surface adsorption and intraparticle diffusion mechanisms primarily controlled the adsorption procedure. Additionally, the Langmuir and Temkin isotherm models were found to most accurately represent the adsorption characteristics of the pollutants on the nanocomposites, and GOP4 can achieve the maximum adsorption capacity of 164.4 mg·g^(-1). The adsorbents' capacity maintains above 85% after five cycles of adsorption-desorption. The nanocomposites in this study demonstrate promising potential for eliminating Cr(Ⅵ) from aqueous solutions.
文摘Revealing the structure evolution of interfacial active species during a dynamic catalytic process is a challenging but pivotal issue for the rational design of high-performance catalysts.Here,we successfully prepare sub-nanometric Pt clusters(~0.8 nm)encapsulated within the defects of CeO_(2)nanorods via an in-situ defect engineering methodology.The as-prepared Pt@d-CeO_(2)catalyst significantly boosts the activity and stability in the water-gas shift(WGS)reaction compared to other analogs.Based on controlled experiments and complementary(in-situ)spectroscopic studies,a reversible encapsulation induced by active site transformation between the Pt^(2+)-terminal hydroxyl and Pt^(δ+)-O vacancy species at the interface is revealed,which enables to evoke the enhanced performance.Our findings not only offer practical guidance for the design of high-efficiency catalysts but also bring a new understanding of the exceptional performance of WGS in a holistic view,which shows a great application potential in materials and catalysis.
基金supported in part by the National Science Fund for Distinguished Young Scholars of China(62225303)the National Natural Science Fundation of China(62303039,62433004)+2 种基金the China Postdoctoral Science Foundation(BX20230034,2023M730190)the Fundamental Research Funds for the Central Universities(buctrc202201,QNTD2023-01)the High Performance Computing Platform,College of Information Science and Technology,Beijing University of Chemical Technology
文摘Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.
基金supported by the National Natural Science Foundation of China(22279139,62227815,22465026,22469015)the National Key R&D Program of China(2022YFA1504500)+1 种基金the Natural Science Foundation of Inner Mongolia Autonomous Region of China(2024JQ06,2022MS2010,2024MS05005)Inner Mongolia University Postgraduate Scientific Research Innovation Project(11200-5223737)。
文摘Rechargeable aqueous zinc(Zn)-metal batteries hold great promise for next-generation energy storage systems.However,their practical application is hindered by several challenges,including dendrite formation,corrosion,and the competing hydrogen evolution reaction.To address these issues,we designed and fabricated a composite protective layer for Zn anodes by integrating carbon nanotubes(CNTs)with chitosan through a simple and scalable scraping process.The CNTs ensure uniform electric field distribution due to their high electrical conductivity,while protonated chitosan regulates ion transport and suppresses dendrite formation at the anode interface.The chitosan/CNTs composite layer also facilitates smooth Zn^(2+)deposition,enhancing the stability and reversibility of the Zn anode.As a result,the chitosan/CNTs@Zn anode demonstrates exceptional cycling stability,achieving over 3000 h of plating/stripping with minimal degradation.When paired with a V_(2)O_(5)cathode,the composite-protected anode significantly improves the cycle stability and energy density of the full cell.Techno-economic analysis confirms that batteries incorporating the chitosan/CNTs protective layer outperform those with bare Zn anodes in terms of energy density and overall performance under optimized conditions.This work provides a scalable and sustainable strategy to overcome the critical challenges of aqueous Zn-metal batteries,paving the way for their practical application in next-generation energy storage systems.
文摘A laboratory-scale reaction-crystallization process of struvite synthesis from diluted water solution of Mg^2＋, NH^＋ 4 and PO3- ions was studied. The research covered the tests of two original constructions of continuous jet-pump Draft Tube Magma （DTM）-type crystallizers with internal circulation of suspension （upward/downward）. Interactions between constructional, hydrodynamic and kinetic factors were established and discussed. Nucleation and linear growth rates of struvite crystals were calculated on the basis of population density distribution. Kinetic model of idealized Mixed Suspension Mixed Product Removal （MSMPR） crystallizer considering the size-dependent growth mechanism was applied （Rojkowski hyperbolic equation）. For comparison purposes the kinetic data corre- sponded to a simpler, continuous draft tube-type crystallizer equipped with propeller agitator were analyzed. It was concluded that crystal product of larger size was withdrawn from the jet-pump DTM crystallizer of the descending flow of suspension in a mixing chamber.
文摘Using the technique of microemulsion polymerization with nano-reactor, dysprosium ferrite/polyacrylamide magnetic composite microsphere was prepared by one-step method in a single inverse microemulsion. The structure, average particle size, morphology of composite microsphere were characterized by FTIR, XRD, TEM and TGA. The magnetic responsibility of composite microsphere was also investigated. The results indicate that the magnetic composite microsphere possess high magnetic responsibility and suspension stability.
基金the Ministry of Education (MOE), Universiti Kebangsaan Malaysia and Universiti Malaysia Pahang for financial support of this research under RAGS (RDU131418) and FRGS (RDU120112)
文摘The performance of CeO2-TiO2 photocatalyst for the photocatalytic reduction of CO2 into methanol was studied under visible light irradiation. The as-prepared catalysts were characterized for their structural, textural and optical properties using X-ray diffraction（XRD）, field emission scanning electron microscopy（FESEM）, X-ray photoelectron spectroscopy（XPS）, nitrogen physisorption analysis, UV-vis spectroscopy and photoluminescence（PL） spectroscopy. The characterization results indicated that the presence of CeO2 stabilized the anatase phase of TiO2, decreased its crystallite size, increased the surface area, reduced the band gap energy and lowered the rate of electron-hole pair recombination. The CeO2-TiO2 photocatalyst showed an increased methanol yield of 18.6 μmol/g under visible light irradiation, compared to the bare TiO2（6.0 μmol/g）.
基金financially supported by the National Natural Science Foundation of China (Nos.21868016, 21763018,22005296 and 21875096)the Key Laboratory for Environment and Energy Catalysis of Jiangxi Province (No. 20181BCD40004)+1 种基金the Natural Science Foundation of Jiangxi Province (No.20181BAB203016)the Graduate Students Innovation Special Foundation of Jiangxi Province (No.YC2021-B014)。
文摘The catalytic performance is highly related to the catalyst structure.Herein,a series of Ni nanoparticles supported on Y_(2)O_(3) with different morphologies were successfully synthesized via hydrothermal process screening different pH environments.These Ni/Y_(2)O_(3)catalysts were applied to efficiently produce CO_(x)-free H2through ammonia decomposition.We identify a significant impact of Y_(2)O_(3)supports on nickel nanoclusters sizes and dispersion.The experimental results show that Ni/Y11 catalyst achieves 100% ammonia decomposition conversion under a gas hour space velocity(GHSV) of 12,000 ml·h^(-1)·gcat^(-1) and temperature of 650℃.Such a high level of activity over Ni/Y11 catalyst was attributed to a large specific surface area,appropriate alkalinity,and small Ni nanoparticles diameter with high dispersion.
基金the financial support from the Engineering and Physical Sciences Research Council (EPSRC) in the UK (grant number EP/M027066/1,EP/R021554/1)Athena at HPC Midlands+, which was funded by EPSRC (grant number EP/P020232/1) of the UK+1 种基金Eureka HPC cluster at the University of SurreyUK Materials and Molecular Modelling Hub for computational resources, which are partially funded by EPSRC (EP/P020194/1)。
文摘Metal sulfides such as Bismuth sulfide(Bi2 S3) hold immense potential to be promoted as anode materials for lithium-ion batteries(LIBs),owing to their high theoretical gravimetric and volumetric capacities.However,the poor electrical conductivity and volume expansion during cycling hinder the practical applications of Bi2 S3.In this work,we used pyrrole and glucose as carbon source to design the surface carbon coating on the surface of Bi2 S3 particles,to improve the structural stability of Bi2 S3.Two composite materials were synthesized-Bi2 S3 coated with nitrogen doped carbon(Bi2 S3@NC),and Bi2 S3 coated with carbon(Bi2 S3@C).When used as anode active materials,both Bi2 S3@NC and Bi2 S3@C showed improved performance compared to Bi2 S3,which confirms surface carbon coating as an effective and scalable way for the modification of Bi2 S3 material.The electrode based on Bi2 S3@NC materials demonstrated higher performance than that of Bi2 S3@C,with an initial discha rge capacity of 1126.5 mA h/g,good cycling stability(500 mA h/g after 200 cycles at 200 mA/g) and excellent rate capability.Finally,Li storage and migration mechanisms in Bi2 S3 are revealed using first principle density functional theory calculations.
文摘A systematic approach for the steady-state operation analysis of chemical processes is pro-posed.The method affords the possibility of taking operation resilience into consideration during thestage of process design.It may serve the designer as an efficient means for the initial screening ofalternative design schemes.An ideal heat integrated distillation column(HIDiC),without any reboileror condenser attached,is studied throughout this work.It has been found that among the various va-riables concerned with the ideal HIDiC,feed thermal condition appears to be the only factor exertingsignificant influences on the interaction between the top and the bottom control loops.Maximuminteraction is expected when the feed thermal condition approaches 0.5.Total number of stages andheat transfer rate are essential to the system ability of disturbance rejection.Therefore,more stagesand higher heat transfer rate ought to be preferred.But,too many stages and higher heat transfer ratemay increase the load of the
文摘This paper reports the measurements of enthalpies of natural gas hydrates in typical natural gas mixture containing methane, ethane, propane and iso-butane at pressure in the vicinity of 2000 kPa (300 psi) and 6900 kPa(1000psi). The measurements were made in a multi-cell differential scanning calorimeter using modified high pressure cells. The enthalpy of water and the enthalpy of dissociation of the gas hydrate were determined from the calorimeter response during slow temperature scanning at constant pressure. The amount of gas released from the dissociation of hydrate was determined from the pumped volume of the high pressure pump. The occupation ratio (mole ratio) of the water to gas and the enthalpy of hydrate formation are subject to uncertainty of 1.5%.The results show that the enthalpy of hydrate formation and the occupation ratio are essentially independent of pressure.
文摘The conversion of biomass-derived products to fine chemicals and fuels is extremely important for the utilization of renewable energy sources.Water is not only a by-product formed during the hydrogenation of biomass-derived oxygenated chemicals,but also an inexpensive and nontoxic solvent.The instability of solid catalysts for aqueous-phase reactions caused by metal leaching and the collapse of a catalyst support represents a significant challenge.In this work,various catalyst stabilization strategies including the nanospace and interfacial confinements that prevent sintering and leaching of metal nanoparticles as well as modification methods for increasing the support stability are summarized and systemically discussed.In addition,feasible approaches to designing stable and efficient heterogeneous catalysts for aqueous-phase reactions are proposed.
文摘Objective:To evaluate the antibacterial activity of essential oil from Trigonella foenumgraecum seeds powder,and identify the compounds from the extracted oil.Methods:The seeds powder of Trigonella foenum-graecum was subjected to Clevenger extractor.Seven strains of bacteria were used to test antibacterial activity of the extract.The activity against bacteria was tested by disk diffusion method using Whatman No.1filter paper.Gas chromatography mass spectrometry analysis was performed with an Agilent7890/5975B-gas chromatography/mass selective detector.Results:The hydrodistillation of seeds powder yielded 0.285%(v/w)of oil.Disk diffusion of the oil showed bactericidal activity against both Gram negative and Gram positive bacteria of tasted strains.The inhibition zone ranged from(8±0)mm to(15.0±0.7)mm depending on microbial strains.Gas chromatography mass spectrometry analysis showed14 different compounds.The total compounds represented 80.96%of the oil.Conclusions:The antibacterial activity is due to the effects of different biological active compounds present in the extract.Identification of the compounds may help to develop new effective antimicrobial agent(s).Further researches on purification,characterization and toxicology of the active compounds are needed.
