The development of catalytic materials for the recycling CO_(2) through a myriad of available processes is an attractive field,especially given the current climate change.While there is increasing publication in this ...The development of catalytic materials for the recycling CO_(2) through a myriad of available processes is an attractive field,especially given the current climate change.While there is increasing publication in this field,the reported catalysts rarely deviate from the traditionally supported metal nanoparticle morphology,with the most simplistic method of enhancement being the addition of more metals to an already complex composition.Encapsulated catalysts,especially yolk@shell catalysts with hollow voids,offer answers to the most prominent issues faced by this field,coking and sintering,and further potential for more advanced phenomena,for example,the confinement effect,to promote selectivity or offer greater protection against coking and sintering.This work serves to demonstrate the current position of catalyst development in the fields of thermal CO_(2) reforming and hydrogenation,summarizing the most recent work available and most common metals used for these reactions,and how yolk@shell catalysts can offer superior performance and survivability in thermal CO_(2) reforming and hydrogenation to the more traditional structure.Furthermore,this work will briefly demonstrate the bespoke nature and highly variable yolk@shell structure.Moreover,this review aims to illuminate the spatial confinement effect and how it enhances yolk@shell structured nanoreactors is presented.展开更多
The catalytic performance is highly related to the catalyst structure.Herein,a series of Ni nanoparticles supported on Y_(2)O_(3) with different morphologies were successfully synthesized via hydrothermal process scre...The catalytic performance is highly related to the catalyst structure.Herein,a series of Ni nanoparticles supported on Y_(2)O_(3) with different morphologies were successfully synthesized via hydrothermal process screening different pH environments.These Ni/Y_(2)O_(3)catalysts were applied to efficiently produce CO_(x)-free H2through ammonia decomposition.We identify a significant impact of Y_(2)O_(3)supports on nickel nanoclusters sizes and dispersion.The experimental results show that Ni/Y11 catalyst achieves 100% ammonia decomposition conversion under a gas hour space velocity(GHSV) of 12,000 ml·h^(-1)·gcat^(-1) and temperature of 650℃.Such a high level of activity over Ni/Y11 catalyst was attributed to a large specific surface area,appropriate alkalinity,and small Ni nanoparticles diameter with high dispersion.展开更多
Experimental results are presented which allow comparison of the electrochemical performance of RuO 2/Ti, Ru 0 3 Sn 0 7 O 2/Ti and Ru 0 3 V 0 7 O 2/Ti catalysts prepared on a titanium substrate by thermal decompositio...Experimental results are presented which allow comparison of the electrochemical performance of RuO 2/Ti, Ru 0 3 Sn 0 7 O 2/Ti and Ru 0 3 V 0 7 O 2/Ti catalysts prepared on a titanium substrate by thermal decomposition from respective precursors. The highest activity for chlorine evolution is observed on the Ru 0 3 V 0 7 O 2/Ti electrode, lower on Ru 0 3 Sn 0 7 O 2/Ti and least on RuO 2/Ti. Voltammograms obtained in the polarisable region are used to characterize the different electrodes. Further more an analysis of the catalytic activity and reaction kinetics of the developed electrodes in NaCl are presented.展开更多
The research results concerning continuous removal of phosphate (V) ions from solutions containing 1.0 or 0.20 mass % of phosphate (V) ions and 0.2 or 0.5 mg/kg of copper (II) ions using magnesium and ammonium ions ad...The research results concerning continuous removal of phosphate (V) ions from solutions containing 1.0 or 0.20 mass % of phosphate (V) ions and 0.2 or 0.5 mg/kg of copper (II) ions using magnesium and ammonium ions addition are presented. Continuous reaction crystallization of struvite MgNH4PO4 × 6H2O ran both under stoichiometric conditions and at 20% excess of magnesium ions (pH 9, t 900 s). It was concluded, that presence of copper (II) ions in a process system influenced product quality moderately advantageously. Mean size of struvite crystals enlarged by ca. 6% only. Lower concentration of phosphate (V) ions and excess of magnesium ions caused, that products of ca. 9% - 13% larger crystal mean size (up to ca.40mm) were removed from the crystallizer. Presence of struvite crystals and copper (II) hydroxide were detected analytically in the products (Cu in a product varied from 6 to 90 mg/kg). Presence of copper (II) ions favored crystallization of struvite in the form of tubular crystals.展开更多
The sonochemical decolorization of Methylene Orange was studied using a 24 kHz Ultrasound device with a 1.4 cm diameter horn. pH, power density, the effects of pH and power density on decolorization were discussed. Th...The sonochemical decolorization of Methylene Orange was studied using a 24 kHz Ultrasound device with a 1.4 cm diameter horn. pH, power density, the effects of pH and power density on decolorization were discussed. The combined effect of radiate time, the initial concentration of dyes and the addition of Fe^2＋ on the decolorization was studied using response surface methodology. The results showed that the factorial central composite design was successfully employed for experimental design and predication of the results. AtpH = 2.8, T=30℃, power denstity= 300 W/L and Fe^2＋ of 2 mg/L, the decolorization percentage of 5 mg/L dye solution reached 96% after 60 mill ultreatment. The rate of decolorization of the dye was greatly improved in the presence of Fe^2＋. The sonolysis of the dye followed first-order kinetics.展开更多
Low-temperature thermal energy conversions down to exergy zero to electric power must contribute energy sustainability. That is to say, reinforcements of power harvesting technologies from extremely low temperatures l...Low-temperature thermal energy conversions down to exergy zero to electric power must contribute energy sustainability. That is to say, reinforcements of power harvesting technologies from extremely low temperatures less than 373 K might be at least one of minimum roles for the current generations. Then, piezoelectric power harvesting process for recovering low-temperature heats was invented by using a unique biphasic operating medium of an underlying water-insoluble/low-boiling-point medium (i.e. NOVEC manufactured by 3M Japan Ltd.) in small quantity and upper-layered water in large quantity. The higher piezoelectric power harvesting densities were naturally revealed with an increase in heating temperatures. Excessive cooling of the operating medium deteriorated the power harvesting efficiency. The denser operating medium was surpassingly helpful to the higher piezoelectric power harvesting density. Concretely, only about 5% density increase of main operating medium (i.e. water with dissolving alum at 0.10 mol/dm3) came to the champion piezoelectric power harvesting density of 92.6 pW/dm2 in this study, which was about 1.4 times compared to that with the original biphasic medium of pure water together with a small quantity of NOVEC.展开更多
Reaction crystallization of struvite in water solutions containing 0.20 mass % of phosphate(V) ions by magnesium and ammonium ions addition was investigated experimentally. Process was carried out in DTM type crystall...Reaction crystallization of struvite in water solutions containing 0.20 mass % of phosphate(V) ions by magnesium and ammonium ions addition was investigated experimentally. Process was carried out in DTM type crystallizer with liquid jet pump device in 298 K assuming stoichiometric conditions. Struvite crystals of mean size Lm 5.2-23.0 μm were produced depending on pH (9-11) and mean residence time of suspension in a crystallizer τ (900-3600 s). Under these conditions linear growth rate of struvite crystals (SIG MSMPR kinetic model) decreased 2-time with the increase in pH and 3-time with the elongation of mean residence time of crystal suspension from 7.11×10-9 m/s (pH 9, τ900 s) to 1.65×10-9 m/s (pH 11, τ3600 s). Nucleation rate varied within the 7.9×108-1.8×1010 1/(sm3) limits. Struvite product of maximal linear size exceeded 100 μm with 10 vol. % of < 3 μm fraction corresponded to pH 9 and τ3600 s.展开更多
Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently d...Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.展开更多
A laboratory-scale reaction-crystallization process of struvite synthesis from diluted water solution of Mg^2＋, NH^＋ 4 and PO3- ions was studied. The research covered the tests of two original constructions of conti...A laboratory-scale reaction-crystallization process of struvite synthesis from diluted water solution of Mg^2＋, NH^＋ 4 and PO3- ions was studied. The research covered the tests of two original constructions of continuous jet-pump Draft Tube Magma （DTM）-type crystallizers with internal circulation of suspension （upward/downward）. Interactions between constructional, hydrodynamic and kinetic factors were established and discussed. Nucleation and linear growth rates of struvite crystals were calculated on the basis of population density distribution. Kinetic model of idealized Mixed Suspension Mixed Product Removal （MSMPR） crystallizer considering the size-dependent growth mechanism was applied （Rojkowski hyperbolic equation）. For comparison purposes the kinetic data corre- sponded to a simpler, continuous draft tube-type crystallizer equipped with propeller agitator were analyzed. It was concluded that crystal product of larger size was withdrawn from the jet-pump DTM crystallizer of the descending flow of suspension in a mixing chamber.展开更多
Using the technique of microemulsion polymerization with nano-reactor, dysprosium ferrite/polyacrylamide magnetic composite microsphere was prepared by one-step method in a single inverse microemulsion. The structure,...Using the technique of microemulsion polymerization with nano-reactor, dysprosium ferrite/polyacrylamide magnetic composite microsphere was prepared by one-step method in a single inverse microemulsion. The structure, average particle size, morphology of composite microsphere were characterized by FTIR, XRD, TEM and TGA. The magnetic responsibility of composite microsphere was also investigated. The results indicate that the magnetic composite microsphere possess high magnetic responsibility and suspension stability.展开更多
By the virtue of their olfactory,physicochemical,and biological characteristics,essential oils(EOs)have drawn wide attention as additives in daily chemicals like perfume or personal care products.Nevertheless,they are...By the virtue of their olfactory,physicochemical,and biological characteristics,essential oils(EOs)have drawn wide attention as additives in daily chemicals like perfume or personal care products.Nevertheless,they are physicochemically unstable and susceptible to degradation or loss.Microencapsulation offers a feasible strategy to stabilize and prolong release of EO.This review summarizes the recognized benefits and functional properties of various preparation and characterization methods,wherein innovative fabrication strategies and their formation mechanisms are especially emphasized.Progress in combining detecting/measuring technologies with kinetic modelling are discussed,to give an integral approach of controlling the dynamic release of encapsulated EOs.Moreover,new development trends of EOs capsules are also highlighted.展开更多
The performance of CeO2-TiO2 photocatalyst for the photocatalytic reduction of CO2 into methanol was studied under visible light irradiation. The as-prepared catalysts were characterized for their structural, textural...The performance of CeO2-TiO2 photocatalyst for the photocatalytic reduction of CO2 into methanol was studied under visible light irradiation. The as-prepared catalysts were characterized for their structural, textural and optical properties using X-ray diffraction（XRD）, field emission scanning electron microscopy（FESEM）, X-ray photoelectron spectroscopy（XPS）, nitrogen physisorption analysis, UV-vis spectroscopy and photoluminescence（PL） spectroscopy. The characterization results indicated that the presence of CeO2 stabilized the anatase phase of TiO2, decreased its crystallite size, increased the surface area, reduced the band gap energy and lowered the rate of electron-hole pair recombination. The CeO2-TiO2 photocatalyst showed an increased methanol yield of 18.6 μmol/g under visible light irradiation, compared to the bare TiO2（6.0 μmol/g）.展开更多
This review presents a comprehensive techno-economic and life-cycle assessment of sustainable aviation fuel(SAF)production from biomass.The critical need for transitioning towards environmentally sustainable alternati...This review presents a comprehensive techno-economic and life-cycle assessment of sustainable aviation fuel(SAF)production from biomass.The critical need for transitioning towards environmentally sustainable alternatives for liquid fuel and aviation industry is first discussed.Key insights encompass the evolutionary progression of biofuel production from first-generation to second-generation biofuels,with a focus on utilizing non-food sources like woody biomass for enhanced sustainability.Available data from the literature on techno-economic assessments of various SAF production pathways are analyzed including production costs,conversion efficiency,and scalability.Moreover,results of lifecycle assessments associated with different SAF production pathways are presented,providing essential insights for decision-making processes.The challenges of scaling up woody biomass-based SAF production are discussed based on the assessment results,and recommendations are proposed to steer stakeholders towards a greener and more sustainable trajectory for aviation operations.展开更多
Metal sulfides such as Bismuth sulfide(Bi2 S3) hold immense potential to be promoted as anode materials for lithium-ion batteries(LIBs),owing to their high theoretical gravimetric and volumetric capacities.However,the...Metal sulfides such as Bismuth sulfide(Bi2 S3) hold immense potential to be promoted as anode materials for lithium-ion batteries(LIBs),owing to their high theoretical gravimetric and volumetric capacities.However,the poor electrical conductivity and volume expansion during cycling hinder the practical applications of Bi2 S3.In this work,we used pyrrole and glucose as carbon source to design the surface carbon coating on the surface of Bi2 S3 particles,to improve the structural stability of Bi2 S3.Two composite materials were synthesized-Bi2 S3 coated with nitrogen doped carbon(Bi2 S3@NC),and Bi2 S3 coated with carbon(Bi2 S3@C).When used as anode active materials,both Bi2 S3@NC and Bi2 S3@C showed improved performance compared to Bi2 S3,which confirms surface carbon coating as an effective and scalable way for the modification of Bi2 S3 material.The electrode based on Bi2 S3@NC materials demonstrated higher performance than that of Bi2 S3@C,with an initial discha rge capacity of 1126.5 mA h/g,good cycling stability(500 mA h/g after 200 cycles at 200 mA/g) and excellent rate capability.Finally,Li storage and migration mechanisms in Bi2 S3 are revealed using first principle density functional theory calculations.展开更多
This paper reports the measurements of enthalpies of natural gas hydrates in typical natural gas mixture containing methane, ethane, propane and iso-butane at pressure in the vicinity of 2000 kPa (300 psi) and 6900 kP...This paper reports the measurements of enthalpies of natural gas hydrates in typical natural gas mixture containing methane, ethane, propane and iso-butane at pressure in the vicinity of 2000 kPa (300 psi) and 6900 kPa(1000psi). The measurements were made in a multi-cell differential scanning calorimeter using modified high pressure cells. The enthalpy of water and the enthalpy of dissociation of the gas hydrate were determined from the calorimeter response during slow temperature scanning at constant pressure. The amount of gas released from the dissociation of hydrate was determined from the pumped volume of the high pressure pump. The occupation ratio (mole ratio) of the water to gas and the enthalpy of hydrate formation are subject to uncertainty of 1.5%.The results show that the enthalpy of hydrate formation and the occupation ratio are essentially independent of pressure.展开更多
The conversion of biomass-derived products to fine chemicals and fuels is extremely important for the utilization of renewable energy sources.Water is not only a by-product formed during the hydrogenation of biomass-d...The conversion of biomass-derived products to fine chemicals and fuels is extremely important for the utilization of renewable energy sources.Water is not only a by-product formed during the hydrogenation of biomass-derived oxygenated chemicals,but also an inexpensive and nontoxic solvent.The instability of solid catalysts for aqueous-phase reactions caused by metal leaching and the collapse of a catalyst support represents a significant challenge.In this work,various catalyst stabilization strategies including the nanospace and interfacial confinements that prevent sintering and leaching of metal nanoparticles as well as modification methods for increasing the support stability are summarized and systemically discussed.In addition,feasible approaches to designing stable and efficient heterogeneous catalysts for aqueous-phase reactions are proposed.展开更多
Objective:To evaluate the antibacterial activity of essential oil from Trigonella foenumgraecum seeds powder,and identify the compounds from the extracted oil.Methods:The seeds powder of Trigonella foenum-graecum was ...Objective:To evaluate the antibacterial activity of essential oil from Trigonella foenumgraecum seeds powder,and identify the compounds from the extracted oil.Methods:The seeds powder of Trigonella foenum-graecum was subjected to Clevenger extractor.Seven strains of bacteria were used to test antibacterial activity of the extract.The activity against bacteria was tested by disk diffusion method using Whatman No.1filter paper.Gas chromatography mass spectrometry analysis was performed with an Agilent7890/5975B-gas chromatography/mass selective detector.Results:The hydrodistillation of seeds powder yielded 0.285%(v/w)of oil.Disk diffusion of the oil showed bactericidal activity against both Gram negative and Gram positive bacteria of tasted strains.The inhibition zone ranged from(8±0)mm to(15.0±0.7)mm depending on microbial strains.Gas chromatography mass spectrometry analysis showed14 different compounds.The total compounds represented 80.96%of the oil.Conclusions:The antibacterial activity is due to the effects of different biological active compounds present in the extract.Identification of the compounds may help to develop new effective antimicrobial agent(s).Further researches on purification,characterization and toxicology of the active compounds are needed.展开更多
Graphene oxide is a very high capacity adsorbent due to its functional groups and π-π interactions with other compounds. Adsorption capacity of graphene oxide, however, can be further enhanced by having synergistic ...Graphene oxide is a very high capacity adsorbent due to its functional groups and π-π interactions with other compounds. Adsorption capacity of graphene oxide, however, can be further enhanced by having synergistic effects through the use of mixed-matrix composite. In this study, silica-decorated graphene oxide(SGO) was used as a high-efficiency adsorbent to remove Congo red(CR) and Cadmium(Ⅱ) from aqueous solutions. The effects of solution initial concentration(20 to 120 mg/l), solution pH(pH 2 to 7), adsorption duration(0 to 140 min) and temperature(298 to 323 K) were measured in order to optimize the adsorption conditions using the SGO adsorbent. Morphological analysis indicated that the silica nanoparticles could be dispersed uniformly on the graphene oxide surfaces. The maximum capacities of adsorbent for effective removal of Cd(Ⅱ) and CR were 43.45 and 333.33 mg/g based on Freundlich and Langmuir isotherms, respectively. Langmuir and Freundlich isotherms displayed the highest values of Q max for CR and Cd(Ⅱ) adsorption in this study, which indicated monolayer adsorption of CR and multilayer adsorption of Cd(II) onto the SGO, respectively. Thermodynamic study showed that the enthalpy( H) and Gibbs free energy( G) values of the adsorption process for both pollutants were negative, suggesting that the process was spontaneous and exothermic in nature. This study showed active sites of SGO( π-π, hydroxyl, carboxyl, ketone, silane-based functional groups) contributed to an enormous enhancement in simultaneous removal of CR and Cd(Ⅱ) from an aqueous solu-tion, Therefore, SGO can be considered as a promising adsorbent for future water pollution control and removal of hazardous materials from aqueous solutions.展开更多
The goal of this research was to determine the impact of nonionic surfactants on drag reduction effect in water and metal oxide nanofluid. Two nonionic surfactants （Rokacet 07 and Rokanol KT） and copper（II） oxide ...The goal of this research was to determine the impact of nonionic surfactants on drag reduction effect in water and metal oxide nanofluid. Two nonionic surfactants （Rokacet 07 and Rokanol KT） and copper（II） oxide wa- ter-based nanofluid were examined. Friction factors in a 4 mm diameter pipe for the Reynolds number between 8000 and 50000 were determined. Results showed that addition of nonionic surfactants caused the decrease of fric- tion factor in water and nanofluid. The drag reduction effect was similar in both cases. Presence of nanoparticles in the system has no great influence on drag reduction effect.展开更多
In this study, we investigated the essential role of feed solution pH so as to gain insights into the transport mechanisms of succinic acid concentration by osmotically-driven forward osmosis （FO） process. FO perfor...In this study, we investigated the essential role of feed solution pH so as to gain insights into the transport mechanisms of succinic acid concentration by osmotically-driven forward osmosis （FO） process. FO performances including water flux and bidirectional transport of succinate and chloride anions were systematically examined using cellulose triacetate-based FO membrane. Additionally, real seawater was explored as draw solution. Experimental results revealed that the pH-dependent speciation of succinic acid can affect the FO performances. Ionization of succinic acid at higher solution pH enhanced the osmotic pressure of feed solution, thus leading to lower water flux performance. A strong effect was pointed out on the succinate rejection for which nearly 100% rejections were achieved at pH above its pKa2 value. The rejection of succinate increased in the following order of chemical form： C2H4C2O4H2 〈 C2H4C2OH- 〈 C2H4C2O24-. With real seawater as the draw solution, low to moderate water fluxes （〈4 L. m- 2. h- 1 ） were observed. The divalent succinate anion was highly retained in the feed side despite differences in the succinic acid feed concentration at pH of approximately 6.90.展开更多
基金Financial support was provided by the Chinese Academy of Sciences–The World Academy of Sciences(CAS-TWAS)president fellowship。
文摘The development of catalytic materials for the recycling CO_(2) through a myriad of available processes is an attractive field,especially given the current climate change.While there is increasing publication in this field,the reported catalysts rarely deviate from the traditionally supported metal nanoparticle morphology,with the most simplistic method of enhancement being the addition of more metals to an already complex composition.Encapsulated catalysts,especially yolk@shell catalysts with hollow voids,offer answers to the most prominent issues faced by this field,coking and sintering,and further potential for more advanced phenomena,for example,the confinement effect,to promote selectivity or offer greater protection against coking and sintering.This work serves to demonstrate the current position of catalyst development in the fields of thermal CO_(2) reforming and hydrogenation,summarizing the most recent work available and most common metals used for these reactions,and how yolk@shell catalysts can offer superior performance and survivability in thermal CO_(2) reforming and hydrogenation to the more traditional structure.Furthermore,this work will briefly demonstrate the bespoke nature and highly variable yolk@shell structure.Moreover,this review aims to illuminate the spatial confinement effect and how it enhances yolk@shell structured nanoreactors is presented.
基金financially supported by the National Natural Science Foundation of China (Nos.21868016, 21763018,22005296 and 21875096)the Key Laboratory for Environment and Energy Catalysis of Jiangxi Province (No. 20181BCD40004)+1 种基金the Natural Science Foundation of Jiangxi Province (No.20181BAB203016)the Graduate Students Innovation Special Foundation of Jiangxi Province (No.YC2021-B014)。
文摘The catalytic performance is highly related to the catalyst structure.Herein,a series of Ni nanoparticles supported on Y_(2)O_(3) with different morphologies were successfully synthesized via hydrothermal process screening different pH environments.These Ni/Y_(2)O_(3)catalysts were applied to efficiently produce CO_(x)-free H2through ammonia decomposition.We identify a significant impact of Y_(2)O_(3)supports on nickel nanoclusters sizes and dispersion.The experimental results show that Ni/Y11 catalyst achieves 100% ammonia decomposition conversion under a gas hour space velocity(GHSV) of 12,000 ml·h^(-1)·gcat^(-1) and temperature of 650℃.Such a high level of activity over Ni/Y11 catalyst was attributed to a large specific surface area,appropriate alkalinity,and small Ni nanoparticles diameter with high dispersion.
文摘Experimental results are presented which allow comparison of the electrochemical performance of RuO 2/Ti, Ru 0 3 Sn 0 7 O 2/Ti and Ru 0 3 V 0 7 O 2/Ti catalysts prepared on a titanium substrate by thermal decomposition from respective precursors. The highest activity for chlorine evolution is observed on the Ru 0 3 V 0 7 O 2/Ti electrode, lower on Ru 0 3 Sn 0 7 O 2/Ti and least on RuO 2/Ti. Voltammograms obtained in the polarisable region are used to characterize the different electrodes. Further more an analysis of the catalytic activity and reaction kinetics of the developed electrodes in NaCl are presented.
文摘The research results concerning continuous removal of phosphate (V) ions from solutions containing 1.0 or 0.20 mass % of phosphate (V) ions and 0.2 or 0.5 mg/kg of copper (II) ions using magnesium and ammonium ions addition are presented. Continuous reaction crystallization of struvite MgNH4PO4 × 6H2O ran both under stoichiometric conditions and at 20% excess of magnesium ions (pH 9, t 900 s). It was concluded, that presence of copper (II) ions in a process system influenced product quality moderately advantageously. Mean size of struvite crystals enlarged by ca. 6% only. Lower concentration of phosphate (V) ions and excess of magnesium ions caused, that products of ca. 9% - 13% larger crystal mean size (up to ca.40mm) were removed from the crystallizer. Presence of struvite crystals and copper (II) hydroxide were detected analytically in the products (Cu in a product varied from 6 to 90 mg/kg). Presence of copper (II) ions favored crystallization of struvite in the form of tubular crystals.
文摘The sonochemical decolorization of Methylene Orange was studied using a 24 kHz Ultrasound device with a 1.4 cm diameter horn. pH, power density, the effects of pH and power density on decolorization were discussed. The combined effect of radiate time, the initial concentration of dyes and the addition of Fe^2＋ on the decolorization was studied using response surface methodology. The results showed that the factorial central composite design was successfully employed for experimental design and predication of the results. AtpH = 2.8, T=30℃, power denstity= 300 W/L and Fe^2＋ of 2 mg/L, the decolorization percentage of 5 mg/L dye solution reached 96% after 60 mill ultreatment. The rate of decolorization of the dye was greatly improved in the presence of Fe^2＋. The sonolysis of the dye followed first-order kinetics.
文摘Low-temperature thermal energy conversions down to exergy zero to electric power must contribute energy sustainability. That is to say, reinforcements of power harvesting technologies from extremely low temperatures less than 373 K might be at least one of minimum roles for the current generations. Then, piezoelectric power harvesting process for recovering low-temperature heats was invented by using a unique biphasic operating medium of an underlying water-insoluble/low-boiling-point medium (i.e. NOVEC manufactured by 3M Japan Ltd.) in small quantity and upper-layered water in large quantity. The higher piezoelectric power harvesting densities were naturally revealed with an increase in heating temperatures. Excessive cooling of the operating medium deteriorated the power harvesting efficiency. The denser operating medium was surpassingly helpful to the higher piezoelectric power harvesting density. Concretely, only about 5% density increase of main operating medium (i.e. water with dissolving alum at 0.10 mol/dm3) came to the champion piezoelectric power harvesting density of 92.6 pW/dm2 in this study, which was about 1.4 times compared to that with the original biphasic medium of pure water together with a small quantity of NOVEC.
文摘Reaction crystallization of struvite in water solutions containing 0.20 mass % of phosphate(V) ions by magnesium and ammonium ions addition was investigated experimentally. Process was carried out in DTM type crystallizer with liquid jet pump device in 298 K assuming stoichiometric conditions. Struvite crystals of mean size Lm 5.2-23.0 μm were produced depending on pH (9-11) and mean residence time of suspension in a crystallizer τ (900-3600 s). Under these conditions linear growth rate of struvite crystals (SIG MSMPR kinetic model) decreased 2-time with the increase in pH and 3-time with the elongation of mean residence time of crystal suspension from 7.11×10-9 m/s (pH 9, τ900 s) to 1.65×10-9 m/s (pH 11, τ3600 s). Nucleation rate varied within the 7.9×108-1.8×1010 1/(sm3) limits. Struvite product of maximal linear size exceeded 100 μm with 10 vol. % of < 3 μm fraction corresponded to pH 9 and τ3600 s.
基金supported in part by the National Science Fund for Distinguished Young Scholars of China(62225303)the National Natural Science Fundation of China(62303039,62433004)+2 种基金the China Postdoctoral Science Foundation(BX20230034,2023M730190)the Fundamental Research Funds for the Central Universities(buctrc202201,QNTD2023-01)the High Performance Computing Platform,College of Information Science and Technology,Beijing University of Chemical Technology
文摘Data-driven process monitoring is an effective approach to assure safe operation of modern manufacturing and energy systems,such as thermal power plants being studied in this work.Industrial processes are inherently dynamic and need to be monitored using dynamic algorithms.Mainstream dynamic algorithms rely on concatenating current measurement with past data.This work proposes a new,alternative dynamic process monitoring algorithm,using dot product feature analysis(DPFA).DPFA computes the dot product of consecutive samples,thus naturally capturing the process dynamics through temporal correlation.At the same time,DPFA's online computational complexity is lower than not just existing dynamic algorithms,but also classical static algorithms(e.g.,principal component analysis and slow feature analysis).The detectability of the new algorithm is analyzed for three types of faults typically seen in process systems:sensor bias,process fault and gain change fault.Through experiments with a numerical example and real data from a thermal power plant,the DPFA algorithm is shown to be superior to the state-of-the-art methods,in terms of better monitoring performance(fault detection rate and false alarm rate)and lower computational complexity.
文摘A laboratory-scale reaction-crystallization process of struvite synthesis from diluted water solution of Mg^2＋, NH^＋ 4 and PO3- ions was studied. The research covered the tests of two original constructions of continuous jet-pump Draft Tube Magma （DTM）-type crystallizers with internal circulation of suspension （upward/downward）. Interactions between constructional, hydrodynamic and kinetic factors were established and discussed. Nucleation and linear growth rates of struvite crystals were calculated on the basis of population density distribution. Kinetic model of idealized Mixed Suspension Mixed Product Removal （MSMPR） crystallizer considering the size-dependent growth mechanism was applied （Rojkowski hyperbolic equation）. For comparison purposes the kinetic data corre- sponded to a simpler, continuous draft tube-type crystallizer equipped with propeller agitator were analyzed. It was concluded that crystal product of larger size was withdrawn from the jet-pump DTM crystallizer of the descending flow of suspension in a mixing chamber.
文摘Using the technique of microemulsion polymerization with nano-reactor, dysprosium ferrite/polyacrylamide magnetic composite microsphere was prepared by one-step method in a single inverse microemulsion. The structure, average particle size, morphology of composite microsphere were characterized by FTIR, XRD, TEM and TGA. The magnetic responsibility of composite microsphere was also investigated. The results indicate that the magnetic composite microsphere possess high magnetic responsibility and suspension stability.
基金This work is supported by the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDA16020405)National Natural Science Foundation of China(Nos.21821005,81772417,and 21902160)。
文摘By the virtue of their olfactory,physicochemical,and biological characteristics,essential oils(EOs)have drawn wide attention as additives in daily chemicals like perfume or personal care products.Nevertheless,they are physicochemically unstable and susceptible to degradation or loss.Microencapsulation offers a feasible strategy to stabilize and prolong release of EO.This review summarizes the recognized benefits and functional properties of various preparation and characterization methods,wherein innovative fabrication strategies and their formation mechanisms are especially emphasized.Progress in combining detecting/measuring technologies with kinetic modelling are discussed,to give an integral approach of controlling the dynamic release of encapsulated EOs.Moreover,new development trends of EOs capsules are also highlighted.
基金the Ministry of Education (MOE), Universiti Kebangsaan Malaysia and Universiti Malaysia Pahang for financial support of this research under RAGS (RDU131418) and FRGS (RDU120112)
文摘The performance of CeO2-TiO2 photocatalyst for the photocatalytic reduction of CO2 into methanol was studied under visible light irradiation. The as-prepared catalysts were characterized for their structural, textural and optical properties using X-ray diffraction（XRD）, field emission scanning electron microscopy（FESEM）, X-ray photoelectron spectroscopy（XPS）, nitrogen physisorption analysis, UV-vis spectroscopy and photoluminescence（PL） spectroscopy. The characterization results indicated that the presence of CeO2 stabilized the anatase phase of TiO2, decreased its crystallite size, increased the surface area, reduced the band gap energy and lowered the rate of electron-hole pair recombination. The CeO2-TiO2 photocatalyst showed an increased methanol yield of 18.6 μmol/g under visible light irradiation, compared to the bare TiO2（6.0 μmol/g）.
文摘This review presents a comprehensive techno-economic and life-cycle assessment of sustainable aviation fuel(SAF)production from biomass.The critical need for transitioning towards environmentally sustainable alternatives for liquid fuel and aviation industry is first discussed.Key insights encompass the evolutionary progression of biofuel production from first-generation to second-generation biofuels,with a focus on utilizing non-food sources like woody biomass for enhanced sustainability.Available data from the literature on techno-economic assessments of various SAF production pathways are analyzed including production costs,conversion efficiency,and scalability.Moreover,results of lifecycle assessments associated with different SAF production pathways are presented,providing essential insights for decision-making processes.The challenges of scaling up woody biomass-based SAF production are discussed based on the assessment results,and recommendations are proposed to steer stakeholders towards a greener and more sustainable trajectory for aviation operations.
基金the financial support from the Engineering and Physical Sciences Research Council (EPSRC) in the UK (grant number EP/M027066/1,EP/R021554/1)Athena at HPC Midlands+, which was funded by EPSRC (grant number EP/P020232/1) of the UK+1 种基金Eureka HPC cluster at the University of SurreyUK Materials and Molecular Modelling Hub for computational resources, which are partially funded by EPSRC (EP/P020194/1)。
文摘Metal sulfides such as Bismuth sulfide(Bi2 S3) hold immense potential to be promoted as anode materials for lithium-ion batteries(LIBs),owing to their high theoretical gravimetric and volumetric capacities.However,the poor electrical conductivity and volume expansion during cycling hinder the practical applications of Bi2 S3.In this work,we used pyrrole and glucose as carbon source to design the surface carbon coating on the surface of Bi2 S3 particles,to improve the structural stability of Bi2 S3.Two composite materials were synthesized-Bi2 S3 coated with nitrogen doped carbon(Bi2 S3@NC),and Bi2 S3 coated with carbon(Bi2 S3@C).When used as anode active materials,both Bi2 S3@NC and Bi2 S3@C showed improved performance compared to Bi2 S3,which confirms surface carbon coating as an effective and scalable way for the modification of Bi2 S3 material.The electrode based on Bi2 S3@NC materials demonstrated higher performance than that of Bi2 S3@C,with an initial discha rge capacity of 1126.5 mA h/g,good cycling stability(500 mA h/g after 200 cycles at 200 mA/g) and excellent rate capability.Finally,Li storage and migration mechanisms in Bi2 S3 are revealed using first principle density functional theory calculations.
文摘This paper reports the measurements of enthalpies of natural gas hydrates in typical natural gas mixture containing methane, ethane, propane and iso-butane at pressure in the vicinity of 2000 kPa (300 psi) and 6900 kPa(1000psi). The measurements were made in a multi-cell differential scanning calorimeter using modified high pressure cells. The enthalpy of water and the enthalpy of dissociation of the gas hydrate were determined from the calorimeter response during slow temperature scanning at constant pressure. The amount of gas released from the dissociation of hydrate was determined from the pumped volume of the high pressure pump. The occupation ratio (mole ratio) of the water to gas and the enthalpy of hydrate formation are subject to uncertainty of 1.5%.The results show that the enthalpy of hydrate formation and the occupation ratio are essentially independent of pressure.
文摘The conversion of biomass-derived products to fine chemicals and fuels is extremely important for the utilization of renewable energy sources.Water is not only a by-product formed during the hydrogenation of biomass-derived oxygenated chemicals,but also an inexpensive and nontoxic solvent.The instability of solid catalysts for aqueous-phase reactions caused by metal leaching and the collapse of a catalyst support represents a significant challenge.In this work,various catalyst stabilization strategies including the nanospace and interfacial confinements that prevent sintering and leaching of metal nanoparticles as well as modification methods for increasing the support stability are summarized and systemically discussed.In addition,feasible approaches to designing stable and efficient heterogeneous catalysts for aqueous-phase reactions are proposed.
文摘Objective:To evaluate the antibacterial activity of essential oil from Trigonella foenumgraecum seeds powder,and identify the compounds from the extracted oil.Methods:The seeds powder of Trigonella foenum-graecum was subjected to Clevenger extractor.Seven strains of bacteria were used to test antibacterial activity of the extract.The activity against bacteria was tested by disk diffusion method using Whatman No.1filter paper.Gas chromatography mass spectrometry analysis was performed with an Agilent7890/5975B-gas chromatography/mass selective detector.Results:The hydrodistillation of seeds powder yielded 0.285%(v/w)of oil.Disk diffusion of the oil showed bactericidal activity against both Gram negative and Gram positive bacteria of tasted strains.The inhibition zone ranged from(8±0)mm to(15.0±0.7)mm depending on microbial strains.Gas chromatography mass spectrometry analysis showed14 different compounds.The total compounds represented 80.96%of the oil.Conclusions:The antibacterial activity is due to the effects of different biological active compounds present in the extract.Identification of the compounds may help to develop new effective antimicrobial agent(s).Further researches on purification,characterization and toxicology of the active compounds are needed.
基金NPRP Grant # 10-0127-170270 from Qatar National Research FundMI-2017-002 grant from Universiti Kebangsaan Malaysia。
文摘Graphene oxide is a very high capacity adsorbent due to its functional groups and π-π interactions with other compounds. Adsorption capacity of graphene oxide, however, can be further enhanced by having synergistic effects through the use of mixed-matrix composite. In this study, silica-decorated graphene oxide(SGO) was used as a high-efficiency adsorbent to remove Congo red(CR) and Cadmium(Ⅱ) from aqueous solutions. The effects of solution initial concentration(20 to 120 mg/l), solution pH(pH 2 to 7), adsorption duration(0 to 140 min) and temperature(298 to 323 K) were measured in order to optimize the adsorption conditions using the SGO adsorbent. Morphological analysis indicated that the silica nanoparticles could be dispersed uniformly on the graphene oxide surfaces. The maximum capacities of adsorbent for effective removal of Cd(Ⅱ) and CR were 43.45 and 333.33 mg/g based on Freundlich and Langmuir isotherms, respectively. Langmuir and Freundlich isotherms displayed the highest values of Q max for CR and Cd(Ⅱ) adsorption in this study, which indicated monolayer adsorption of CR and multilayer adsorption of Cd(II) onto the SGO, respectively. Thermodynamic study showed that the enthalpy( H) and Gibbs free energy( G) values of the adsorption process for both pollutants were negative, suggesting that the process was spontaneous and exothermic in nature. This study showed active sites of SGO( π-π, hydroxyl, carboxyl, ketone, silane-based functional groups) contributed to an enormous enhancement in simultaneous removal of CR and Cd(Ⅱ) from an aqueous solu-tion, Therefore, SGO can be considered as a promising adsorbent for future water pollution control and removal of hazardous materials from aqueous solutions.
基金Supported by the State Committee for Scientific Research(Poland)(NN209764040)Michal Drzazga received the Scholarship under the Project DoktoRIS-Scholarship Program for Innovative Silesia Co-financed by the European Union under the European Social Fund
文摘The goal of this research was to determine the impact of nonionic surfactants on drag reduction effect in water and metal oxide nanofluid. Two nonionic surfactants （Rokacet 07 and Rokanol KT） and copper（II） oxide wa- ter-based nanofluid were examined. Friction factors in a 4 mm diameter pipe for the Reynolds number between 8000 and 50000 were determined. Results showed that addition of nonionic surfactants caused the decrease of fric- tion factor in water and nanofluid. The drag reduction effect was similar in both cases. Presence of nanoparticles in the system has no great influence on drag reduction effect.
基金the financial support for this work provided by the LRGS/2013/UKM-UKM/PT/03 grant from the Ministry of Education Malaysia
文摘In this study, we investigated the essential role of feed solution pH so as to gain insights into the transport mechanisms of succinic acid concentration by osmotically-driven forward osmosis （FO） process. FO performances including water flux and bidirectional transport of succinate and chloride anions were systematically examined using cellulose triacetate-based FO membrane. Additionally, real seawater was explored as draw solution. Experimental results revealed that the pH-dependent speciation of succinic acid can affect the FO performances. Ionization of succinic acid at higher solution pH enhanced the osmotic pressure of feed solution, thus leading to lower water flux performance. A strong effect was pointed out on the succinate rejection for which nearly 100% rejections were achieved at pH above its pKa2 value. The rejection of succinate increased in the following order of chemical form： C2H4C2O4H2 〈 C2H4C2OH- 〈 C2H4C2O24-. With real seawater as the draw solution, low to moderate water fluxes （〈4 L. m- 2. h- 1 ） were observed. The divalent succinate anion was highly retained in the feed side despite differences in the succinic acid feed concentration at pH of approximately 6.90.
