Self-injection and acceleration of monoenergetic electron beams from laser wakefield accelerators are first investigated in the highly relativistic regime, using 100 TW class, 27 fs laser pulses. Quasi-monoenergetic m...Self-injection and acceleration of monoenergetic electron beams from laser wakefield accelerators are first investigated in the highly relativistic regime, using 100 TW class, 27 fs laser pulses. Quasi-monoenergetic multi- bunched beams with energies as high as multi-hundredMeV are observed with simultaneous measurements of side-scattering emissions that indicate the formation of self-channelfing and self-injection of electrons into a plasma wake, referred to as a ＇bubble＇. The three-dimensional particle-in-cell simulations confirmed multiple self-injection of electron bunches into the bubble and their beam acceleration with gradient of 1.5 GeV/cm.展开更多
The crystallization behavior of silica-filled polydimethylsiloxane(PDMS)was investigated in detail by^(1)H solid-state nuclear magnetic resonance(^(1)H SS-NMR)in combination with synchrotron radiation wide-angle X-ray...The crystallization behavior of silica-filled polydimethylsiloxane(PDMS)was investigated in detail by^(1)H solid-state nuclear magnetic resonance(^(1)H SS-NMR)in combination with synchrotron radiation wide-angle X-ray scattering(WAXS),and temperature-modulated differential scanning calorimetry(TMDSC)techniques.For neat PDMS,no apparent difference is observed for the crystallinity characterized by^(1)H SS-NMR and WAXS at low-temperature regions.However,upon filler addition,a 15%-35%lower difference in crystallinity is observed measured by^(1)H SS-NMR compared to WAXS.The origin of such mismatch was explored through multi-component structural,dynamics,and chain-order analysis of PDMS samples with different filler fractions.The 1D integrated WAXS results of PDMS with different filler fractions at different temperatures show that the packing structure as well as crystal size basically remain unchanged,but as the filler fraction increases from 0 phr to 60 phr,the rigid component’s dynamics order parameter S_(r)obtained by^(1)H SS-NMR decreases from 0.70 to 0.55.The filler fraction-dependent crystallinity calculated based on S_(r)was compared with experimental values,revealing a behavior of decreasing order in the crystalline region.Combining with the results of accelerated chain dynamics in crystalline region as reflected by T_(2)values,the molecular origin is attributed to the formation of CONDIS crystals,whose conformational order is lost but the position and orientation orders are kept.Such hypothesis is further supported by the TMDSC results,where,as the filler fraction increases from 0 phr to 60 phr,the melting range widens from 8.77 K to 14.56 K,representing a growth of166%.In addition to previous reports related to the condition for forming CONDIS mesophase,i.e.,temperature,pressure,and stretching,the nano-sized filler could also introduce the local conformational disorder for chain packing.展开更多
The Rare Isotope Science Project (RISP) is a research complex consisting of a heavy-ion accelerator, which contains a front-end system, a super-conducting linear accelerator, an isotope separator online (ISOL) system,...The Rare Isotope Science Project (RISP) is a research complex consisting of a heavy-ion accelerator, which contains a front-end system, a super-conducting linear accelerator, an isotope separator online (ISOL) system, and an in-flight system. The original purpose of the post-linear-accelerator (post-linac) section was to accelerate either a stable driver beam derived from an electron cyclotron resonance ion source, or an unstable rare-isotope beam from an ISOL system. The post-linac lattice has now been redesigned using a novel and improved acceleration concept that allows the simultaneous acceleration of both a stable driver beam and a radioisotope beam. To achieve this, the post-linac lattice is set for a mass-to-charge ratio (A/q) that is the average of the two beams. The performance of this simultaneous two-beam acceleration is here assessed using two ion beams: 58Ni^8+ and 132Sn^20+. A beam dynamics simulation was performed using the TRACK and TraceWin codes. The resultant beam dynamics for the new RISP post-linac lattice design are examined. We also estimate the effects of machine errors and their correction on the post-linac lattice.展开更多
The general development of Rheo-NMR during the last four decades as well as selective hyphenated apparatuses is presented.Based on different magnet types,the current review is divided into two categories,namely low-fi...The general development of Rheo-NMR during the last four decades as well as selective hyphenated apparatuses is presented.Based on different magnet types,the current review is divided into two categories,namely low-field and high-field NMR,while the timedomain NMR is normally applied in the former case and the frequency-domain NMR is adopted in the latter one.Depending on different rheometer cells,it can be further divided into tensile and shear mode Rheo-NMR.The combination of various rheometer cells and NMR facility guarantees our acquisition of molecular level structure and dynamics information under flow conditions,which is crucial for our understanding of the molecular origin of complex fluids.A personal perspective is also presented at last to highlight possible development in this direction.展开更多
We present a lattice design and beam dynamics analysis for a 4 GeV low-emittance,high-brilliance synchrotron light source.The lattice consisted of 26 six-bend achromats with 26 long and 26 short straight sections.We p...We present a lattice design and beam dynamics analysis for a 4 GeV low-emittance,high-brilliance synchrotron light source.The lattice consisted of 26 six-bend achromats with 26 long and 26 short straight sections.We present the design results for a hybrid multi-bend achromat(HMBA)lattice with a natural emittance of 168 pm and circumference of 729.3 m.Each cell had 4 longitudinal gradient bendings,2 combined bendings,14 quadrupoles,and 2 families of sextupoles.The lattice was designed to beflexible to provide both nonzero and zero dispersion functions in the long straight section.The two straight sections in each cell had lengths of 5.6 and 1.2 m.To ensure sufficient injection,we optimized the design lattice and dynamic aperture.We investigated the dynamic aperture in the lattice with machine errors,and the results showed that the lattice design provides sufficient dynamic aperture after COD correction for beam injection.We present the results of an injection scheme that demonstrates the space in the injection section and the particle motions of the injected beam.We also present the results of beam tracking after the beam injection to examine the characteristics of the beam injection.The designed HMBA lattice was well optimized in terms of the beam parameters and brilliance as an intermediate light source at 4 GeV and a circumference of 729.3 m.展开更多
The Rare isotope Accelerator Of Newness（RAON） heavy-ion accelerator has been designed for the Rare Isotope Science Project（RISP） in Korea. The RAON will produce heavy-ion beams from 660-MeV-proton to200-MeV/u-uran...The Rare isotope Accelerator Of Newness（RAON） heavy-ion accelerator has been designed for the Rare Isotope Science Project（RISP） in Korea. The RAON will produce heavy-ion beams from 660-MeV-proton to200-MeV/u-uranium with continuous wave（CW） power of 400 k W to support research in various scientific fields.Its system consists of an ECR ion source, LEBTs with 10 ke V/u, CW RFQ accelerator with 81.25 MHz and 500 ke V/u, a MEBT system, and a SC linac. In detail, the driver linac system consists of a Quarter Wave Resonator（QWR） section with 81.25 MHz and a Half Wave Resonator（HWR） section with 162.5 MHz, Linac-1, and a Spoke Cavity section with 325 MHz, Linac-2. These linacs have been designed to optimize the beam parameters to meet the required design goals. At the same time, a light-heavy ion accelerator with high-intensity beam, such as proton,deuteron, and helium beams, is required for experiments. In this paper, we present the design study of the high intensity RFQ for a deuteron beam with energies from 30 ke V/u to 1.5 MeV/u and currents in the m A range. This system is composed of an Penning Ionization Gauge ion source, short LEBT with a RF deflector, and shared SC Linac. In order to increase acceleration efficiency in a short length with low cost, the 2nd harmonic of 162.5 MHz is applied as the operation frequency in the D^＋RFQ design. The D^＋RFQ is designed with 4.97 m, 1.52 bravery factor. Since it operates with 2nd harmonic frequency, the beam should be 50% of the duty factor while the cavity should be operated in CW mode, to protect the downstream linac system. We focus on avoiding emittance growth by the space-charge effect and optimizing the RFQ to achieve a high transmission and low emittance growth. Both the RFQ beam dynamics study and RFQ cavity design study for two and three dimensions will be discussed.展开更多
文摘Self-injection and acceleration of monoenergetic electron beams from laser wakefield accelerators are first investigated in the highly relativistic regime, using 100 TW class, 27 fs laser pulses. Quasi-monoenergetic multi- bunched beams with energies as high as multi-hundredMeV are observed with simultaneous measurements of side-scattering emissions that indicate the formation of self-channelfing and self-injection of electrons into a plasma wake, referred to as a ＇bubble＇. The three-dimensional particle-in-cell simulations confirmed multiple self-injection of electron bunches into the bubble and their beam acceleration with gradient of 1.5 GeV/cm.
基金financially supported by NSAF Joint Fund of China(No.U2030203)the National Natural Science Foundation of China(Nos.51973207 and 51903230)。
文摘The crystallization behavior of silica-filled polydimethylsiloxane(PDMS)was investigated in detail by^(1)H solid-state nuclear magnetic resonance(^(1)H SS-NMR)in combination with synchrotron radiation wide-angle X-ray scattering(WAXS),and temperature-modulated differential scanning calorimetry(TMDSC)techniques.For neat PDMS,no apparent difference is observed for the crystallinity characterized by^(1)H SS-NMR and WAXS at low-temperature regions.However,upon filler addition,a 15%-35%lower difference in crystallinity is observed measured by^(1)H SS-NMR compared to WAXS.The origin of such mismatch was explored through multi-component structural,dynamics,and chain-order analysis of PDMS samples with different filler fractions.The 1D integrated WAXS results of PDMS with different filler fractions at different temperatures show that the packing structure as well as crystal size basically remain unchanged,but as the filler fraction increases from 0 phr to 60 phr,the rigid component’s dynamics order parameter S_(r)obtained by^(1)H SS-NMR decreases from 0.70 to 0.55.The filler fraction-dependent crystallinity calculated based on S_(r)was compared with experimental values,revealing a behavior of decreasing order in the crystalline region.Combining with the results of accelerated chain dynamics in crystalline region as reflected by T_(2)values,the molecular origin is attributed to the formation of CONDIS crystals,whose conformational order is lost but the position and orientation orders are kept.Such hypothesis is further supported by the TMDSC results,where,as the filler fraction increases from 0 phr to 60 phr,the melting range widens from 8.77 K to 14.56 K,representing a growth of166%.In addition to previous reports related to the condition for forming CONDIS mesophase,i.e.,temperature,pressure,and stretching,the nano-sized filler could also introduce the local conformational disorder for chain packing.
文摘The Rare Isotope Science Project (RISP) is a research complex consisting of a heavy-ion accelerator, which contains a front-end system, a super-conducting linear accelerator, an isotope separator online (ISOL) system, and an in-flight system. The original purpose of the post-linear-accelerator (post-linac) section was to accelerate either a stable driver beam derived from an electron cyclotron resonance ion source, or an unstable rare-isotope beam from an ISOL system. The post-linac lattice has now been redesigned using a novel and improved acceleration concept that allows the simultaneous acceleration of both a stable driver beam and a radioisotope beam. To achieve this, the post-linac lattice is set for a mass-to-charge ratio (A/q) that is the average of the two beams. The performance of this simultaneous two-beam acceleration is here assessed using two ion beams: 58Ni^8+ and 132Sn^20+. A beam dynamics simulation was performed using the TRACK and TraceWin codes. The resultant beam dynamics for the new RISP post-linac lattice design are examined. We also estimate the effects of machine errors and their correction on the post-linac lattice.
基金This work was financially supported by the National Natural Science Foundation of China(U20A20256,51973207)the NSAF Joint Fund(U2030203).
文摘The general development of Rheo-NMR during the last four decades as well as selective hyphenated apparatuses is presented.Based on different magnet types,the current review is divided into two categories,namely low-field and high-field NMR,while the timedomain NMR is normally applied in the former case and the frequency-domain NMR is adopted in the latter one.Depending on different rheometer cells,it can be further divided into tensile and shear mode Rheo-NMR.The combination of various rheometer cells and NMR facility guarantees our acquisition of molecular level structure and dynamics information under flow conditions,which is crucial for our understanding of the molecular origin of complex fluids.A personal perspective is also presented at last to highlight possible development in this direction.
文摘We present a lattice design and beam dynamics analysis for a 4 GeV low-emittance,high-brilliance synchrotron light source.The lattice consisted of 26 six-bend achromats with 26 long and 26 short straight sections.We present the design results for a hybrid multi-bend achromat(HMBA)lattice with a natural emittance of 168 pm and circumference of 729.3 m.Each cell had 4 longitudinal gradient bendings,2 combined bendings,14 quadrupoles,and 2 families of sextupoles.The lattice was designed to beflexible to provide both nonzero and zero dispersion functions in the long straight section.The two straight sections in each cell had lengths of 5.6 and 1.2 m.To ensure sufficient injection,we optimized the design lattice and dynamic aperture.We investigated the dynamic aperture in the lattice with machine errors,and the results showed that the lattice design provides sufficient dynamic aperture after COD correction for beam injection.We present the results of an injection scheme that demonstrates the space in the injection section and the particle motions of the injected beam.We also present the results of beam tracking after the beam injection to examine the characteristics of the beam injection.The designed HMBA lattice was well optimized in terms of the beam parameters and brilliance as an intermediate light source at 4 GeV and a circumference of 729.3 m.
基金Supported by Korea University Future Research Grant
文摘The Rare isotope Accelerator Of Newness（RAON） heavy-ion accelerator has been designed for the Rare Isotope Science Project（RISP） in Korea. The RAON will produce heavy-ion beams from 660-MeV-proton to200-MeV/u-uranium with continuous wave（CW） power of 400 k W to support research in various scientific fields.Its system consists of an ECR ion source, LEBTs with 10 ke V/u, CW RFQ accelerator with 81.25 MHz and 500 ke V/u, a MEBT system, and a SC linac. In detail, the driver linac system consists of a Quarter Wave Resonator（QWR） section with 81.25 MHz and a Half Wave Resonator（HWR） section with 162.5 MHz, Linac-1, and a Spoke Cavity section with 325 MHz, Linac-2. These linacs have been designed to optimize the beam parameters to meet the required design goals. At the same time, a light-heavy ion accelerator with high-intensity beam, such as proton,deuteron, and helium beams, is required for experiments. In this paper, we present the design study of the high intensity RFQ for a deuteron beam with energies from 30 ke V/u to 1.5 MeV/u and currents in the m A range. This system is composed of an Penning Ionization Gauge ion source, short LEBT with a RF deflector, and shared SC Linac. In order to increase acceleration efficiency in a short length with low cost, the 2nd harmonic of 162.5 MHz is applied as the operation frequency in the D^＋RFQ design. The D^＋RFQ is designed with 4.97 m, 1.52 bravery factor. Since it operates with 2nd harmonic frequency, the beam should be 50% of the duty factor while the cavity should be operated in CW mode, to protect the downstream linac system. We focus on avoiding emittance growth by the space-charge effect and optimizing the RFQ to achieve a high transmission and low emittance growth. Both the RFQ beam dynamics study and RFQ cavity design study for two and three dimensions will be discussed.
