In the quest to develop high-performance lubrication additives,a novel nanocomposite comprising biodiesel soot modified by silver(Ag/BDS)was synthesized.The tribological behavior of Ag/BDS nanocomposite as an additive...In the quest to develop high-performance lubrication additives,a novel nanocomposite comprising biodiesel soot modified by silver(Ag/BDS)was synthesized.The tribological behavior of Ag/BDS nanocomposite as an additive for liquid paraffin(LP)were systematically investigated using response surface methodology.To elucidate the friction and wear mechanisms associated with the Ag/BDS nanocomposite,various analytical techniques were employed,including scanning electron microscopy with energy-dispersive spectroscopy(SEM/EDS),Raman spectroscopy,and molecular dynamics simulations.The results show that the concentration of Ag/BDS has a significant impact on the tribological properties of LP under different applied loads and sliding speeds.Notably,LP containing 0.25%Ag/BDS shows the most favorable tribological performance and in comparison,to pure LP,the average friction coefficient and average wear volume have been reduced by 42.7%and 21.2%,respectively.The mechanisms underlying the reduction in friction and anti-wear mechanism of Ag/BDS have been attributed to the excellent synergies of Ag and BDS.Specifically,the Ag particles facilitate the incorporation of BDS particles in the formation of uniform boundary lubrication films.展开更多
Lead-free bulk ceramics for advanced pulsed power capacitors show relatively low recoverable energy storage density(Wrec)especially at low electric field condition.To address this challenge,we propose an A-site defect...Lead-free bulk ceramics for advanced pulsed power capacitors show relatively low recoverable energy storage density(Wrec)especially at low electric field condition.To address this challenge,we propose an A-site defect engineering to optimize the electric polarization behavior by disrupting the orderly arrangement of A-site ions,in which Ba_(0.105)Na_(0.325)Sr_(0.245−1.5x)□_(0.5x)Bi_(0.325)+xTiO_(3)(BNS_(0.245−1.5x)□_(0.5x)B_(0.325+x)T,x=0,0.02,0.04,0.06,and 0.08)lead-free ceramics are selected as the representative.The BNS_(0.245−1.5x)□_(0.5x)B_(0.325+x)T ceramics are prepared by using pressureless solid-state sintering and achieve large W_(rec)(1.8 J/cm^(3))at a low electric field(@110 kV/cm)when x=0.06.The value of 1.8 J/cm3 is super high as compared to all other W_(rec) in lead-free bulk ceramics under a relatively low electric field(<160 kV/cm).Furthermore,a high dielectric constant of 2930 within 15%fluctuation in a wide temperature range of 40–350℃is also obtained in BNS_(0.245−1.5x)□_(0.5x)B_(0.325+x)T(x=0.06)ceramics.The excellent performances can be attributed to the A-site defect engineering,which can reduce remnant polarization(P_(r))and improve the thermal evolution of polar nanoregions(PNRs).This work confirms that the BNS_(0.245−1.5x)□_(0.5x)B_(0.325+x)T(x=0.06)ceramics are desirable for advanced pulsed power capacitors,and will push the development of a series of Bi0.5Na0.5TiO3(BNT)-based ceramics with high W_(rec) and high-temperature stability.展开更多
In this paper,a Sr^2+and Dy^3+co-doped γ-Ce2S3 red pigment was synthesized via a combination of coprecipitation and sulfurization processes.Mixed oxide was prepared by presintering the coprecipitates,(Ce,Sr,Dy)CO3,fo...In this paper,a Sr^2+and Dy^3+co-doped γ-Ce2S3 red pigment was synthesized via a combination of coprecipitation and sulfurization processes.Mixed oxide was prepared by presintering the coprecipitates,(Ce,Sr,Dy)CO3,followed by high-temperature sulfurization under a CS2 atmosphere.The effects of the sulfurization temperature,time,and doped proportion on the phase composition,color performance and temperature stability of γ-Ce2S3 were systematically studied.The results show that a stable γ-Ce2S3 red pigment can be obtained through Sr^2+and Dy^3+co-doping at 730℃ for 200 min.The diffraction peaks of all the samples shift to higher 2θ values with increasing doping proportion,indicating that part of the Dy^3+species enter the lattice and form a solid solution.The band gap of the samples remains practically constant at 2.01-2.04 eV,which causes their red color.The best red-color quality(L*=37.13,a*=34.77,b*=29.44) is achieved when the pigment has a Dy^3+/Ce^3+molar ratio of 0.15,and the material maintains its excellent red color(L*=31.49 a*=30.94 b*=25.33) after being heated at 410℃ for 30 min.展开更多
In this study,K+-doped γ-Ce2 S3 was successfully prepared via a gas-solid reaction method using CeO2,K2 CO3,and CS2 as raw materials.The effects of the suitable sulfide system and different molar ratios of K to Ce(nK...In this study,K+-doped γ-Ce2 S3 was successfully prepared via a gas-solid reaction method using CeO2,K2 CO3,and CS2 as raw materials.The effects of the suitable sulfide system and different molar ratios of K to Ce(nK/Ce=0-0.30) on the phase composition,crystal structure,chromaticity and thermal stability ofγ-Ce2 S3 were systematically investigated.Pure γ-Ce2 S3 was obtained by calcining the doped samples at840℃ for 150 min.After calcination at the same temperature the undoped K+samples exhibit a pure α-phase.Samples with a K/Ce molar ratio(nK/Ce) of 0.10-0.25 comprise only the γ-phase;and when nK/Ce exceeds 0.25,a new heterogeneous phase,KCeS2,emerges.For values of nK/Ce in the range of0-0.25,the γ-Ce2 S3 lattice parameters gradually increases with increasing K+ content.When nK/Ceexceedes 0.25,the lattice parameters remains unchanged.As nK/Ce increased,the synthesized color gradually changes from red to orange—red and finally,to yellow.The redness value a* reaches the maximum(L*=33.86,a*=36.68,b*=38.15) when nK/Ce=0.10,The nK/Ce=0.10 composition continues to exhibit the y-phase after heat treatment at 420℃ for 10 min in air.The K+doping fills the internal vacancies of γ-Ce2 S3 and formed a solid solution,which is beneficial for the stability of its lattice,thus improving the thermal stability of γ-Ce2 S3(from 350 to 420℃).展开更多
Dielectric ceramic capacitors,with the advantages of high power density,fast chargedischarge capability,excellent fatigue endurance,and good high temperature stability,have been acknowledged to be promising candidates...Dielectric ceramic capacitors,with the advantages of high power density,fast chargedischarge capability,excellent fatigue endurance,and good high temperature stability,have been acknowledged to be promising candidates for solid-state pulse power systems.This review investigates the energy storage performances of linear dielectric,relaxor ferroelectric,and antiferroelectric from the viewpoint of chemical modification,macro/microstructural design,and electrical property optimization.Research progress of ceramic bulks and films for Pb-based and/or Pb-free systems is summarized.Finally,we propose the perspectives on the development of energy storage ceramics for pulse power capacitors in the future.展开更多
(Ba0.3Sr0.7)x(Bi0.5Na0.5)1-xTiO3(BSxBNT,x=0.3–V0.8)ceramics were prepared to investigate their structure,dielectric and ferroelectric properties.BSxBNT ceramics possess pure perovskite structure accompanied from a te...(Ba0.3Sr0.7)x(Bi0.5Na0.5)1-xTiO3(BSxBNT,x=0.3–V0.8)ceramics were prepared to investigate their structure,dielectric and ferroelectric properties.BSxBNT ceramics possess pure perovskite structure accompanied from a tetragonal symmetry to pseudo-cubic one with the increase of x value,being confirmed by X-ray diffraction(XRD)and Raman results.The Tm corresponding to a temperature in the vicinity of maximum dielectric constant gradually decreases from 110℃(x=0.3)to-45℃(x=0.8),across Tm=36℃(x=0.5)with a maximum dielectric constant(ɛr=5920@1 kHz)around room temperature.The saturated polarization Ps gradually while the remnant polarization Pr sharply decreases with the increase of x value,making the P-E hysteresis loop of BSxBNT ceramics goes slim.A maximum difference between Ps and Pr(Ps-Pr)is obtained for BSxBNT ceramics with x=0.5,at which a high recoverable energy density(Wrec=1.04 J/cm3)is achieved under an applied electric field of 100 kV/cm with an efficiency ofη=77%.Meanwhile,the varied temperature P-E loops,fatigue measurements,and electric breakdown characteristics for the sample with x=0.5 indicate that it is promising for pulsed power energy storage capacitor candidate materials.展开更多
Relaxor ferroelectric ceramics have very high dielectric constant(e)but relatively low electrical breakdown strength(Eb),while glass-ceramics exhibit higher E,due to the more uniformly dispersed amorphous phases and s...Relaxor ferroelectric ceramics have very high dielectric constant(e)but relatively low electrical breakdown strength(Eb),while glass-ceramics exhibit higher E,due to the more uniformly dispersed amorphous phases and submicrocrystals/nanocrystals inside.How to effectively combine the advantages of both relaxor ferroelectric ceramics and glass-ceramics is of great significance for the development of new dielectric materials with high energy storage performance.In this work,we firstly prepared BaO-SrO-Bi_(2)O_(3)-Na_(2)0-TiO_(2)-Al_(2)O_(3)-SiO_(2)(abbreviated as GS)glass powders,and then fabricated(Ba_(0.3)Sr_(0.7))_(0.5)(Bi_(0.5)Na_(0.5))_(0.5)TiO_(3)+x wt%GS ceramic composites(abbreviated as BSo.sBNT-xGS,x=0,2,6,10,14,16,and 18).Submicrocrystals/nanocrystals with a similar composition to BSo.sBNT were crystalized from the glass,ensuring the formation of uniform core-shell structure in BSo.sBNT-xGS relaxor ferroelectric ceramic/glass-ceramic composites.When the addition amount of GS was 14 wt%,the composite possessed both high&r(>3200 at 1 kHz)and high E,(~170 kV/cm)at room temperature,and their recoverable energy storage density and efficiency were Wrec=2.1 J/cm’and n=65.2%,respectively.The BSo.sBNT-14GS composite also had several attractive properties such as good temperature,frequency,cycle stability,and fast charge-discharge speed.This work provides insights into the relaxor ceramic/glass-ceramic composites for pulsed power capacitors and sheds light on the utilization of the hybrid systems.展开更多
A glass with composition of B_(2)O_(3)-Bi_(2)O_(3)-SiO_(2)-CaO-BaO-Al_(2)O_(3)-ZrO_(2)(BBSZ)modified Ba_(x)Sr_(1-x)TiO_(3)(BST,x=0.3 and 0.4)ceramics were prepared by a conventional solid state reaction method abided ...A glass with composition of B_(2)O_(3)-Bi_(2)O_(3)-SiO_(2)-CaO-BaO-Al_(2)O_(3)-ZrO_(2)(BBSZ)modified Ba_(x)Sr_(1-x)TiO_(3)(BST,x=0.3 and 0.4)ceramics were prepared by a conventional solid state reaction method abided by a formula of BST+y%BBSZ(y=0,2,4,7,and 10,in mass).The effect of BBSZ glass content on the structure,dielectric properties and energy storage characteristics of the ceramics was investigated.The dielectric constant reduced but the endurable electrical strength enhanced due to the BBSZ glass addition in BST ceramics.In particular,the dielectric loss of the ceramics at elevated temperature(e.g.200℃)can be strongly suppressed from tanδ>20%to tanδ<3% after BBSZ glass modification.For Ba_(0.3)Sr_(0.7)TiO_(3)+2%BBSZ ceramics,an optimized energy storage density(γ=0.63 J/cm^(3))and efficiency(η=91.6%)under an applied electric field of 160 kV/cm was obtained at room temperature.Meanwhile,the temperature dependent polarization-electric field(P-E)hysteresis loops were measured to evaluate the energy storage characteristics of the ceramics potential for high voltage capacitor application at elevated temperatures.展开更多
Facing the increasingly serious energy and environmental problems,the research and development of new energy storage technology and environment-friendly energy storage materials are imminent.As a typical lead-free fer...Facing the increasingly serious energy and environmental problems,the research and development of new energy storage technology and environment-friendly energy storage materials are imminent.As a typical lead-free ferroelectric with excellent dielectric properties,(Bi,Na)TiO_(3)(BNT)is supposed to be the most potential and competitive environment-friendly ceramic material and has become a research hotspot for dielectric energy storage in recent years.This paper first briefly introduces the basic physical principles and energy storage performance evaluation parameters of dielectric energy storage materials,then summarizes the critical research systems and related progress of BNT-based lead-free energy storage materials(bulk ceramics,films and multilayer ceramics)from the aspects of ions doping modification and multi-component composite optimization,and finally looks forward to the improvement direction and energy storage application prospect of BNT-based lead-free relaxor ferroelectric materials.展开更多
(0:74-x)(Na_(0.5)Bi_(0.5))TiO_(3)-xBaTiO_(3)-0.26SrTiO_(3)(x=0~0.1)(abbreviated as NBT-xBT-ST)lead-free ceramics were fabricated by a solid-state reaction method.The effect of Ba doping amount x on the structure and e...(0:74-x)(Na_(0.5)Bi_(0.5))TiO_(3)-xBaTiO_(3)-0.26SrTiO_(3)(x=0~0.1)(abbreviated as NBT-xBT-ST)lead-free ceramics were fabricated by a solid-state reaction method.The effect of Ba doping amount x on the structure and energy storage properties of NBT-xBT-ST ceramics were investigated.All the NBT-xBT-ST ceramics showed single perovskite structure with a pseudocubic phase.Ba doping effectively suppressed grain growth,in favor of forming small and uniform grains.The ceramics with a composition of x=0.04,an optimized energy storage density(γ=0.47 J/cm^(3))and efficiency(η=48:67%),under an applied electric field of 50 kV/cm,should be a candidate for solid-state compact pulsed power capacitor materials.展开更多
Air-rechargeable aqueous Zn-based batteries(ARAZBBs)possess their typical air self-charge advantage.Unfortunately,their further development is beset by two major challenges:an ultrashort air-charge lifespan due to the...Air-rechargeable aqueous Zn-based batteries(ARAZBBs)possess their typical air self-charge advantage.Unfortunately,their further development is beset by two major challenges:an ultrashort air-charge lifespan due to the formation of'dead Zn'(basic zinc salt,BZS)deposited on the cathode surface and the severe corrosion of Zn anode due to continuous consumption of Zn during the air-charge process.Aiming at untying these Gordian knots,herein,an effective dead-zinc activation method of in-situ electrochemical conversion successfully activates'dead zinc'in BZS and repairs the Zn anode simultaneously.Specifically,the specific discharge capacity of as-prepared nitrogen-doped hierarchically porous carbon(NHPC)declines rapidly from 132.4 to 36.8 mAh g^(-1)at 0.2 A g^(-1)after only the 5th air-charge due to a large amount of dead zinc formation.To recover these failed NHPC electrodes,we skillfully draw support from in-situ electrochemical conversion to successfully eliminate BZS on the NHPC during the galvanostatic charging process.More importantly,the method also recovers Zn resources from'dead zinc'to well repair Zn anode,providing a viable solution to address the issue of continuous consumption of Zn.As a result,the air-rechargeable specific capacity of NHPC has been significantly improved from 36.8 to118.9 mAh g^(-1)at 0.2 A g^(-1)by using this effective dead-zinc activation method.Meanwhile,related mechanisms to charge-storage,air-charge,and in-situ electrochemical conversion are clearly revealed by a series of in-/ex-situ tests.This work lays the foundation for the wider practical application of ARAZBBs.展开更多
Ce and W co-doped CaBi_(2)Nb_(2)O_(9) ceramics with chemical formula Ca_(0.96)Ce_(0.04)Bi_(2)Nb_(2-x)W_(x)O_(9)(CCBNW100x,x=0-0.07)are fabricated via conventional solid state sintering method,to investigate the effect...Ce and W co-doped CaBi_(2)Nb_(2)O_(9) ceramics with chemical formula Ca_(0.96)Ce_(0.04)Bi_(2)Nb_(2-x)W_(x)O_(9)(CCBNW100x,x=0-0.07)are fabricated via conventional solid state sintering method,to investigate the effect of W addition on the structure,electrical resistivity,dielectric and piezoelectric properties.A piezoelectric constant d33 of 13.4 pC/N is obtained in CCBN-W2 ceramics,>100% higher than that of pure CaBi_(2)Nb_(2)O_(9)(d_(33)=5.8e6.4 pC/N).Of particular significance is that the electrical resistivity of CCBN-W2 ceramics(r=3.7×109 U cm at 500℃)is three orders of magnitude higher than pure CaBi_(2)Nb_(2)O_(9)(r=2.9×10^(6) U cm at same temperature).All these properties,together with its low dielectric loss(tandδ0.13%)and excellent d33 thermal stability up to 800℃,merit the CCBN-W2 ceramics for high temperature piezoelectric sensing applications.展开更多
基金funded by the National Natural Science Foundation of China(52075141)the Open Project of Anhui Province Key Laboratory of Critical Friction Pair for Advanced Equipment(LCFP-2408)+9 种基金Key Research&Development(R&D)Plan of Anhui Province under Grant(2022a05020019)Support Program for Outstanding Young Talents in Anhui Province Colleges and Universities(gxyq2022079)Excellent Research and Innovation Teams Project of Anhui Province's Universities(2022AH010092)Discipline Construction Quality Improvement Project of Chaohu University(kj22fdzy03,XLZ202307,XLZ202301)School-level Scientific Research Project of Chaohu University(XLY-202112)Scientific Research Planning Project of Anhui Provincial(2022AH051726)Anhui Province University Science and Engineering Teachers'Internship Program in Enterprises(2024jsqygz89)Anhui Province College Students'Innovation and Entrepreneurship Training Program(S202410380020)Anhui Province Postdoctoral Research Project(2024A773)Horizontal Research Project of Chaohu University(hxkt20230006).
文摘In the quest to develop high-performance lubrication additives,a novel nanocomposite comprising biodiesel soot modified by silver(Ag/BDS)was synthesized.The tribological behavior of Ag/BDS nanocomposite as an additive for liquid paraffin(LP)were systematically investigated using response surface methodology.To elucidate the friction and wear mechanisms associated with the Ag/BDS nanocomposite,various analytical techniques were employed,including scanning electron microscopy with energy-dispersive spectroscopy(SEM/EDS),Raman spectroscopy,and molecular dynamics simulations.The results show that the concentration of Ag/BDS has a significant impact on the tribological properties of LP under different applied loads and sliding speeds.Notably,LP containing 0.25%Ag/BDS shows the most favorable tribological performance and in comparison,to pure LP,the average friction coefficient and average wear volume have been reduced by 42.7%and 21.2%,respectively.The mechanisms underlying the reduction in friction and anti-wear mechanism of Ag/BDS have been attributed to the excellent synergies of Ag and BDS.Specifically,the Ag particles facilitate the incorporation of BDS particles in the formation of uniform boundary lubrication films.
基金This work was financially supported by the National Natural Science Foundation of China(No.51767010)the Key Project of Natural Science Foundation of Jiangxi Province of China(No.20212ACB204010)。
文摘Lead-free bulk ceramics for advanced pulsed power capacitors show relatively low recoverable energy storage density(Wrec)especially at low electric field condition.To address this challenge,we propose an A-site defect engineering to optimize the electric polarization behavior by disrupting the orderly arrangement of A-site ions,in which Ba_(0.105)Na_(0.325)Sr_(0.245−1.5x)□_(0.5x)Bi_(0.325)+xTiO_(3)(BNS_(0.245−1.5x)□_(0.5x)B_(0.325+x)T,x=0,0.02,0.04,0.06,and 0.08)lead-free ceramics are selected as the representative.The BNS_(0.245−1.5x)□_(0.5x)B_(0.325+x)T ceramics are prepared by using pressureless solid-state sintering and achieve large W_(rec)(1.8 J/cm^(3))at a low electric field(@110 kV/cm)when x=0.06.The value of 1.8 J/cm3 is super high as compared to all other W_(rec) in lead-free bulk ceramics under a relatively low electric field(<160 kV/cm).Furthermore,a high dielectric constant of 2930 within 15%fluctuation in a wide temperature range of 40–350℃is also obtained in BNS_(0.245−1.5x)□_(0.5x)B_(0.325+x)T(x=0.06)ceramics.The excellent performances can be attributed to the A-site defect engineering,which can reduce remnant polarization(P_(r))and improve the thermal evolution of polar nanoregions(PNRs).This work confirms that the BNS_(0.245−1.5x)□_(0.5x)B_(0.325+x)T(x=0.06)ceramics are desirable for advanced pulsed power capacitors,and will push the development of a series of Bi0.5Na0.5TiO3(BNT)-based ceramics with high W_(rec) and high-temperature stability.
基金supported by the National Natural Science Foundation of China(51462010)the Natural Science Foundation of Jiangxi Province(20161BAB206132,20171ACB20022)the Science and technology program Foundation of Jingdezhen(2017GYZD019-012).
文摘In this paper,a Sr^2+and Dy^3+co-doped γ-Ce2S3 red pigment was synthesized via a combination of coprecipitation and sulfurization processes.Mixed oxide was prepared by presintering the coprecipitates,(Ce,Sr,Dy)CO3,followed by high-temperature sulfurization under a CS2 atmosphere.The effects of the sulfurization temperature,time,and doped proportion on the phase composition,color performance and temperature stability of γ-Ce2S3 were systematically studied.The results show that a stable γ-Ce2S3 red pigment can be obtained through Sr^2+and Dy^3+co-doping at 730℃ for 200 min.The diffraction peaks of all the samples shift to higher 2θ values with increasing doping proportion,indicating that part of the Dy^3+species enter the lattice and form a solid solution.The band gap of the samples remains practically constant at 2.01-2.04 eV,which causes their red color.The best red-color quality(L*=37.13,a*=34.77,b*=29.44) is achieved when the pigment has a Dy^3+/Ce^3+molar ratio of 0.15,and the material maintains its excellent red color(L*=31.49 a*=30.94 b*=25.33) after being heated at 410℃ for 30 min.
基金Project supported by National Natural Science Foundation of China (51462010)Natural Science Foundation of Jiangxi Province(20161BAB206132,20171ACB20022)The Innovation fund of Jingdezhen Ceramic Institute (JYC-201803)。
文摘In this study,K+-doped γ-Ce2 S3 was successfully prepared via a gas-solid reaction method using CeO2,K2 CO3,and CS2 as raw materials.The effects of the suitable sulfide system and different molar ratios of K to Ce(nK/Ce=0-0.30) on the phase composition,crystal structure,chromaticity and thermal stability ofγ-Ce2 S3 were systematically investigated.Pure γ-Ce2 S3 was obtained by calcining the doped samples at840℃ for 150 min.After calcination at the same temperature the undoped K+samples exhibit a pure α-phase.Samples with a K/Ce molar ratio(nK/Ce) of 0.10-0.25 comprise only the γ-phase;and when nK/Ce exceeds 0.25,a new heterogeneous phase,KCeS2,emerges.For values of nK/Ce in the range of0-0.25,the γ-Ce2 S3 lattice parameters gradually increases with increasing K+ content.When nK/Ceexceedes 0.25,the lattice parameters remains unchanged.As nK/Ce increased,the synthesized color gradually changes from red to orange—red and finally,to yellow.The redness value a* reaches the maximum(L*=33.86,a*=36.68,b*=38.15) when nK/Ce=0.10,The nK/Ce=0.10 composition continues to exhibit the y-phase after heat treatment at 420℃ for 10 min in air.The K+doping fills the internal vacancies of γ-Ce2 S3 and formed a solid solution,which is beneficial for the stability of its lattice,thus improving the thermal stability of γ-Ce2 S3(from 350 to 420℃).
基金supported by the National Natural Science Foundation of China(51767010).
文摘Dielectric ceramic capacitors,with the advantages of high power density,fast chargedischarge capability,excellent fatigue endurance,and good high temperature stability,have been acknowledged to be promising candidates for solid-state pulse power systems.This review investigates the energy storage performances of linear dielectric,relaxor ferroelectric,and antiferroelectric from the viewpoint of chemical modification,macro/microstructural design,and electrical property optimization.Research progress of ceramic bulks and films for Pb-based and/or Pb-free systems is summarized.Finally,we propose the perspectives on the development of energy storage ceramics for pulse power capacitors in the future.
基金This work was financially supported by National Natural Science Foundation of China(51767010)Science&Technology Key Research Project of Jiangxi Provincial Education Department(GJJ170760)Graduate Student Innovation Fund of Jiangxi Province(YC2018-S295).
文摘(Ba0.3Sr0.7)x(Bi0.5Na0.5)1-xTiO3(BSxBNT,x=0.3–V0.8)ceramics were prepared to investigate their structure,dielectric and ferroelectric properties.BSxBNT ceramics possess pure perovskite structure accompanied from a tetragonal symmetry to pseudo-cubic one with the increase of x value,being confirmed by X-ray diffraction(XRD)and Raman results.The Tm corresponding to a temperature in the vicinity of maximum dielectric constant gradually decreases from 110℃(x=0.3)to-45℃(x=0.8),across Tm=36℃(x=0.5)with a maximum dielectric constant(ɛr=5920@1 kHz)around room temperature.The saturated polarization Ps gradually while the remnant polarization Pr sharply decreases with the increase of x value,making the P-E hysteresis loop of BSxBNT ceramics goes slim.A maximum difference between Ps and Pr(Ps-Pr)is obtained for BSxBNT ceramics with x=0.5,at which a high recoverable energy density(Wrec=1.04 J/cm3)is achieved under an applied electric field of 100 kV/cm with an efficiency ofη=77%.Meanwhile,the varied temperature P-E loops,fatigue measurements,and electric breakdown characteristics for the sample with x=0.5 indicate that it is promising for pulsed power energy storage capacitor candidate materials.
基金supported by the National Natural Science Foundation of China(52267002)Natural Science Foundation of Jiangxi Province(20212ACB204010)+1 种基金Science&Technology Research Project of Jiangxi Provincial Education Department(GJJ211301)the Graduate Innovation Fund of Jiangxi Province(YC2021-S527).
文摘Relaxor ferroelectric ceramics have very high dielectric constant(e)but relatively low electrical breakdown strength(Eb),while glass-ceramics exhibit higher E,due to the more uniformly dispersed amorphous phases and submicrocrystals/nanocrystals inside.How to effectively combine the advantages of both relaxor ferroelectric ceramics and glass-ceramics is of great significance for the development of new dielectric materials with high energy storage performance.In this work,we firstly prepared BaO-SrO-Bi_(2)O_(3)-Na_(2)0-TiO_(2)-Al_(2)O_(3)-SiO_(2)(abbreviated as GS)glass powders,and then fabricated(Ba_(0.3)Sr_(0.7))_(0.5)(Bi_(0.5)Na_(0.5))_(0.5)TiO_(3)+x wt%GS ceramic composites(abbreviated as BSo.sBNT-xGS,x=0,2,6,10,14,16,and 18).Submicrocrystals/nanocrystals with a similar composition to BSo.sBNT were crystalized from the glass,ensuring the formation of uniform core-shell structure in BSo.sBNT-xGS relaxor ferroelectric ceramic/glass-ceramic composites.When the addition amount of GS was 14 wt%,the composite possessed both high&r(>3200 at 1 kHz)and high E,(~170 kV/cm)at room temperature,and their recoverable energy storage density and efficiency were Wrec=2.1 J/cm’and n=65.2%,respectively.The BSo.sBNT-14GS composite also had several attractive properties such as good temperature,frequency,cycle stability,and fast charge-discharge speed.This work provides insights into the relaxor ceramic/glass-ceramic composites for pulsed power capacitors and sheds light on the utilization of the hybrid systems.
基金supported by National Natural Science Foundation of China(51767010)Science&Technology Key Research Project of Jiangxi Provincial Education Department(GJJ170760).
文摘A glass with composition of B_(2)O_(3)-Bi_(2)O_(3)-SiO_(2)-CaO-BaO-Al_(2)O_(3)-ZrO_(2)(BBSZ)modified Ba_(x)Sr_(1-x)TiO_(3)(BST,x=0.3 and 0.4)ceramics were prepared by a conventional solid state reaction method abided by a formula of BST+y%BBSZ(y=0,2,4,7,and 10,in mass).The effect of BBSZ glass content on the structure,dielectric properties and energy storage characteristics of the ceramics was investigated.The dielectric constant reduced but the endurable electrical strength enhanced due to the BBSZ glass addition in BST ceramics.In particular,the dielectric loss of the ceramics at elevated temperature(e.g.200℃)can be strongly suppressed from tanδ>20%to tanδ<3% after BBSZ glass modification.For Ba_(0.3)Sr_(0.7)TiO_(3)+2%BBSZ ceramics,an optimized energy storage density(γ=0.63 J/cm^(3))and efficiency(η=91.6%)under an applied electric field of 160 kV/cm was obtained at room temperature.Meanwhile,the temperature dependent polarization-electric field(P-E)hysteresis loops were measured to evaluate the energy storage characteristics of the ceramics potential for high voltage capacitor application at elevated temperatures.
基金supported by National Natural Science Foundation of China(52267002)Natural Science Foundation of Jiangxi Province(20212ACB204010)+1 种基金Science&Technology Research Project of Jiangxi Provincial Education Department(GJJ211301)the Graduate Innovation Fund of Jiangxi Province(YC2022-S884).
文摘Facing the increasingly serious energy and environmental problems,the research and development of new energy storage technology and environment-friendly energy storage materials are imminent.As a typical lead-free ferroelectric with excellent dielectric properties,(Bi,Na)TiO_(3)(BNT)is supposed to be the most potential and competitive environment-friendly ceramic material and has become a research hotspot for dielectric energy storage in recent years.This paper first briefly introduces the basic physical principles and energy storage performance evaluation parameters of dielectric energy storage materials,then summarizes the critical research systems and related progress of BNT-based lead-free energy storage materials(bulk ceramics,films and multilayer ceramics)from the aspects of ions doping modification and multi-component composite optimization,and finally looks forward to the improvement direction and energy storage application prospect of BNT-based lead-free relaxor ferroelectric materials.
基金supported by National Natural Science Foundation of China(Grant No.51767010)and Science&Technology Key Research Project of Jiangxi Provincial Education Department(Grant No.GJJ170760).
文摘(0:74-x)(Na_(0.5)Bi_(0.5))TiO_(3)-xBaTiO_(3)-0.26SrTiO_(3)(x=0~0.1)(abbreviated as NBT-xBT-ST)lead-free ceramics were fabricated by a solid-state reaction method.The effect of Ba doping amount x on the structure and energy storage properties of NBT-xBT-ST ceramics were investigated.All the NBT-xBT-ST ceramics showed single perovskite structure with a pseudocubic phase.Ba doping effectively suppressed grain growth,in favor of forming small and uniform grains.The ceramics with a composition of x=0.04,an optimized energy storage density(γ=0.47 J/cm^(3))and efficiency(η=48:67%),under an applied electric field of 50 kV/cm,should be a candidate for solid-state compact pulsed power capacitor materials.
基金financial support of the National Natural Science Foundation of China(22379063)。
文摘Air-rechargeable aqueous Zn-based batteries(ARAZBBs)possess their typical air self-charge advantage.Unfortunately,their further development is beset by two major challenges:an ultrashort air-charge lifespan due to the formation of'dead Zn'(basic zinc salt,BZS)deposited on the cathode surface and the severe corrosion of Zn anode due to continuous consumption of Zn during the air-charge process.Aiming at untying these Gordian knots,herein,an effective dead-zinc activation method of in-situ electrochemical conversion successfully activates'dead zinc'in BZS and repairs the Zn anode simultaneously.Specifically,the specific discharge capacity of as-prepared nitrogen-doped hierarchically porous carbon(NHPC)declines rapidly from 132.4 to 36.8 mAh g^(-1)at 0.2 A g^(-1)after only the 5th air-charge due to a large amount of dead zinc formation.To recover these failed NHPC electrodes,we skillfully draw support from in-situ electrochemical conversion to successfully eliminate BZS on the NHPC during the galvanostatic charging process.More importantly,the method also recovers Zn resources from'dead zinc'to well repair Zn anode,providing a viable solution to address the issue of continuous consumption of Zn.As a result,the air-rechargeable specific capacity of NHPC has been significantly improved from 36.8 to118.9 mAh g^(-1)at 0.2 A g^(-1)by using this effective dead-zinc activation method.Meanwhile,related mechanisms to charge-storage,air-charge,and in-situ electrochemical conversion are clearly revealed by a series of in-/ex-situ tests.This work lays the foundation for the wider practical application of ARAZBBs.
基金financially supported by National Natural Science Foundation of China(61671224)and Science Foundation of Jiangxi Provincial Education Department of China(GJJ160919)the“Bairen Yuanhang”Project funding supported by Jiangxi Science and Technology Association.
文摘Ce and W co-doped CaBi_(2)Nb_(2)O_(9) ceramics with chemical formula Ca_(0.96)Ce_(0.04)Bi_(2)Nb_(2-x)W_(x)O_(9)(CCBNW100x,x=0-0.07)are fabricated via conventional solid state sintering method,to investigate the effect of W addition on the structure,electrical resistivity,dielectric and piezoelectric properties.A piezoelectric constant d33 of 13.4 pC/N is obtained in CCBN-W2 ceramics,>100% higher than that of pure CaBi_(2)Nb_(2)O_(9)(d_(33)=5.8e6.4 pC/N).Of particular significance is that the electrical resistivity of CCBN-W2 ceramics(r=3.7×109 U cm at 500℃)is three orders of magnitude higher than pure CaBi_(2)Nb_(2)O_(9)(r=2.9×10^(6) U cm at same temperature).All these properties,together with its low dielectric loss(tandδ0.13%)and excellent d33 thermal stability up to 800℃,merit the CCBN-W2 ceramics for high temperature piezoelectric sensing applications.
