It is extremely difficult to introduce high-density nano twins during the solidification process of TiAl alloy.In this study,high-density nanotwins are inducted in the as-cast Ti48Al2Cr alloyed by adding Re element.Ph...It is extremely difficult to introduce high-density nano twins during the solidification process of TiAl alloy.In this study,high-density nanotwins are inducted in the as-cast Ti48Al2Cr alloyed by adding Re element.Phase transformation,morphology characteristics of nano twins,compressive and tensile proper-ties,and the related mechanisms have been studied.Results show that B2 phase enriched with Re tends to precipitate along theα_(2)/γinterface within lamellar colony.The stacking fault energy(SFE)ofγphase decreases from 43 mJ/m^(2) to 16 mJ/m^(2) as Re content increases from 0 at.%to 0.6 at.%,decreasing the crit-ical shear stress for twin formation.Compared to the mismatch value ofα_(2)/γinterface(0.004),which of B2/α_(2) and B2/γinterfaces increase to 0.247 and 0.149,respectively.Driven by high interfacial stress,high-density dislocations are generated at the B2/α_(2) interface,providing the dislocation slip channel for the formation of stacking faults(SFs)and nanotwins at the B2/γinterface.Therefore,the mechanism of inducting high-density nanotwins is to reduce the stacking fault energy ofγphase by Re and form highly mismatched B2/α_(2) interface.Compressive strength and the strain increase from 1723 MPa to 2398 MPa and 29%to 39%as Re content increases from 0 at.%to 0.6 at.%,respectively.Tensile strength increases from 356 MPa to 452 MPa without sacrificing plasticity.The improvement in strength and plasticity are attributed to the nano-twinning strengthening and interfacial thermal mismatch strengthening.Forming nanotwins during solidification process serve as the nucleation sites for newly formed twins during de-formation process,increasing the deformation tolerance of TiAl alloy.展开更多
1.Introduction.Ni-Mn-X(X=Ga,In,Sn,or Sb)Heusler alloys have versatile properties[1-4],such as shape memory effect[1],superelastic-ity[5],magnetocaloric effect[3],elastocaloric effect[6],and even multicaloric effect[7]...1.Introduction.Ni-Mn-X(X=Ga,In,Sn,or Sb)Heusler alloys have versatile properties[1-4],such as shape memory effect[1],superelastic-ity[5],magnetocaloric effect[3],elastocaloric effect[6],and even multicaloric effect[7],that indicate their potential for use in actu-ators,sensors,micropumps,energy harvesters,and solid-state re-frigeration[8-10].Among the alloys,Ni-Mn-Sn-based alloys are environment-friendly and cost-effective[6,7,11],and hence,they have received widespread attention.展开更多
A Co-free as-cast AlCrAlCrFe_(2)Ni_(2)medium entropy alloy(MEA)with multi-phases was remelted by fiber laser in this study.The effect of laser remelting on the microstructure,phase distribution and mechanical properti...A Co-free as-cast AlCrAlCrFe_(2)Ni_(2)medium entropy alloy(MEA)with multi-phases was remelted by fiber laser in this study.The effect of laser remelting on the microstructure,phase distribution and mechanical properties was investigated by characterizing the as-cast and the remelted AlCrAlCrFe_(2)Ni_(2)alloy.The laser remelting process resulted in a significant decrease of grain size from about 780μm to 58.89μm(longitudinal section)and 15.87μm(transverse section)and an increase of hardness from 4.72±0.293 GPa to 6.40±0.147 GPa(longitudinal section)and 7.55±0.360 GPa(transverse section).It was also found that the long side plate-like microstructure composed of FCC phase,ordered B2 phase and disordered BCC phase in the as-cast alloy was transformed into nano-size weave-like microstructure consisting of alternating ordered B2 and disordered BCC phases.The mechanical properties were evaluated by the derived stressstrain relationship obtained from nano-indentation tests data.The results showed that the yield stress increased from 661.9 MPa to 1347.6 MPa(longitudinal section)and 1647.2 MPa(transverse section)after remelting.The individual contribution of four potential strengthening mechanisms to the yield strength of the remelted alloy was quantitatively evaluated,including grain boundary strengthening,dislocation strengthening,solid solution strengthening and precipitation strengthening.The calculation results indicated that dislocation and precipitation are dominant strengthening mechanisms in the laser remelted MEA.展开更多
Additively manufactured(AM)metallic materials commonly possess substantial tensile surface residual stress,which is detrimental to the load-bearing service behavior.Recently,we demonstrated that deep cryogenic treatme...Additively manufactured(AM)metallic materials commonly possess substantial tensile surface residual stress,which is detrimental to the load-bearing service behavior.Recently,we demonstrated that deep cryogenic treatment(DCT)is an effective method for improving the tensile properties of CoCrFeMnNi high-entropy alloy(HEA)samples fabricated by laser melting deposition(LMD),by introducing high compressive residual stress and deformation microstructures without destroying the AM shape.However,carrying out the DCT in a single-step mode does not improve the residual stress gradients inherent from the LMD process,which are undesirable as the mechanical properties will not be homogeneous within the sample.In this work,we show that carrying out the DCT in a cyclic mode with repeated cryogenic cooling and reheating can significantly homogenize the residual stress in LMD-fabricated Co Cr Fe Mn Ni HEA,and improve tensile strength and ductility,compared with single-step DCT of the same cryogenic soaking duration.Under cyclic DCT,the thermal stress is re-elevated to a high value at each cryogenic cooling step,leading to the formation of denser and more intersecting reinforcing crystalline defects and hcp phase transformation,compared to single-step DCT of the same total cryogenic soaking duration in which the thermal stress relaxes towards a low value over time.The enhancement of defect formation in the cyclic mode of DCT also leads to more uniform residual stress distribution in the sample after the DCT.The results here provide important insights on optimizing DCT processes for post-fabrication improvement of mechanical properties of AM metallic net shapes.展开更多
Constructing heterojunctions and hollow multi-shelled structures can render materials with fascinating physicochemical properties,and have been regarded as two promising strategies to overcome the severe shuttling and...Constructing heterojunctions and hollow multi-shelled structures can render materials with fascinating physicochemical properties,and have been regarded as two promising strategies to overcome the severe shuttling and sluggish kinetics of polysulfide in lithium-sulfur(Li-S)batteries.However,a single strategy can only take limited effect.Modulating catalytic hosts with synergistic effects are urgently desired.Herein,Mn_(3)O_(4)-MnS heterogeneous multi-shelled hollow spheres are meticulously designed by controlled sulfuration of Mn2O3 hollow spheres,and then applied as advanced encapsulation hosts for Li-S batteries.Benefiting from the separated spatial confinement by hollow multi-shelled structure,ample exposed active sites and built-in electric field by heterogeneous interface,and synergistic effects between Mn_(3)O_(4)(strong adsorption)and MnS(fast conversion)components,the assembled battery achieves prominent rate capability and decent cyclability(0.016%decay per cycle at 2 C,1000 cycles).More crucially,satisfactory areal capacity reaches up to 7.1 mAh cm^(-2)even with high sulfur loading(8.0 mg cm^(-2))and lean electrolyte(E/S=4.0 pL mg^(-1))conditions.This work will provide inspiration for the rational design of hollow multi-shelled heterostructure for various electrocatalysis applications.展开更多
With the widespread deployment of indoor positioning systems, an unprecedented scale of indoor trajectories is being produced. By considering the inherent uncertainties and the text information contained in such an in...With the widespread deployment of indoor positioning systems, an unprecedented scale of indoor trajectories is being produced. By considering the inherent uncertainties and the text information contained in such an indoor trajectory, a new definition named Indoor Uncertain Semantic Trajectory is defined in this paper. In this paper, we focus on a new primitive, yet quite essential query named Indoor Uncertain Semantic Trajectory Similarity Join (IUST-Join for short), which is to match all similar pairs of indoor uncertain semantic trajectories from two sets. IUST-Join targets a number of essential indoor applications. With these applications in mind, we provide a purposeful definition of an indoor uncertain semantic trajectory similarity metric named IUS. To process IUST-Join more efficiently, both an inverted index on indoor uncertain semantic trajectories named 3IST and the first acceleration strategy are proposed to form a filtering-and-verification framework, where most invalid pairs of indoor uncertain semantic trajectories are pruned at quite low computation cost. And based on this filtering-and-verification framework, we present a highly-efficient algorithm named Indoor Uncertain Semantic Trajectory Similarity Join Processing (USP for short). In addition, lots of novel and effective acceleration strategies are proposed and embedded in the USP algorithm. Thanks to these techniques, both the time complexity and the time overhead of the USP algorithm are further reduced. The results of extensive experiments demonstrate the superior performance of the proposed work.展开更多
Even in their bulk forms,complex alloys like high-entropy alloys(HEAs)exhibit favorable activity and stability as electrocatalysts for the oxygen evolution reaction(OER).However,the underlying reasons are not yet full...Even in their bulk forms,complex alloys like high-entropy alloys(HEAs)exhibit favorable activity and stability as electrocatalysts for the oxygen evolution reaction(OER).However,the underlying reasons are not yet fully understood.In a family of Mo-doped CrFeCoNi-based HEAs,we have identified three crucial factors that govern their performance:(i)homogeneous solid solution phase of HEAs helps to maintain high-valence states of metals;(ii)surface reconstruction results in a hybrid material comprising amorphous domains and percolated crystalline structures;(iii)diversity of active intermediate species(M–O,M–OOH,and,notably,the abundance of superoxideμ–OO),which display stronger adsorption capacity on the reconstructed surface.These results are revealing due to their resemblance to findings in other families of electrocatalysts for OER,as well as their unique features specific to HEAs.In line with these factors,a CrFeCoNiMo0.2 bulk integrated electrode displays a low overpotential of 215 mV,rapid kinetics,and long-term stability of over 90 d.Bulk HEAs hold great potential for industrial applications.展开更多
基金supported by the National Natural Science Foundation of China(No.U21A2042)the National Nature Fund Youth Fund Project of China(No.52101038)Young Elite Scientists Sponsorship Program by CAST(No.2021QNRC001).
文摘It is extremely difficult to introduce high-density nano twins during the solidification process of TiAl alloy.In this study,high-density nanotwins are inducted in the as-cast Ti48Al2Cr alloyed by adding Re element.Phase transformation,morphology characteristics of nano twins,compressive and tensile proper-ties,and the related mechanisms have been studied.Results show that B2 phase enriched with Re tends to precipitate along theα_(2)/γinterface within lamellar colony.The stacking fault energy(SFE)ofγphase decreases from 43 mJ/m^(2) to 16 mJ/m^(2) as Re content increases from 0 at.%to 0.6 at.%,decreasing the crit-ical shear stress for twin formation.Compared to the mismatch value ofα_(2)/γinterface(0.004),which of B2/α_(2) and B2/γinterfaces increase to 0.247 and 0.149,respectively.Driven by high interfacial stress,high-density dislocations are generated at the B2/α_(2) interface,providing the dislocation slip channel for the formation of stacking faults(SFs)and nanotwins at the B2/γinterface.Therefore,the mechanism of inducting high-density nanotwins is to reduce the stacking fault energy ofγphase by Re and form highly mismatched B2/α_(2) interface.Compressive strength and the strain increase from 1723 MPa to 2398 MPa and 29%to 39%as Re content increases from 0 at.%to 0.6 at.%,respectively.Tensile strength increases from 356 MPa to 452 MPa without sacrificing plasticity.The improvement in strength and plasticity are attributed to the nano-twinning strengthening and interfacial thermal mismatch strengthening.Forming nanotwins during solidification process serve as the nucleation sites for newly formed twins during de-formation process,increasing the deformation tolerance of TiAl alloy.
基金supported by the National Key R&D Pro-gram of China(No.2022YFB3805701)National Natural Science Foundation of China(NSFC)(No.52371182,51701052,52192592,52192593)+1 种基金Young Elite Scientists Sponsorship Program by CAST(No.2019QNRC001)the Heilongjiang Touyan Innovation Team Program.
文摘1.Introduction.Ni-Mn-X(X=Ga,In,Sn,or Sb)Heusler alloys have versatile properties[1-4],such as shape memory effect[1],superelastic-ity[5],magnetocaloric effect[3],elastocaloric effect[6],and even multicaloric effect[7],that indicate their potential for use in actu-ators,sensors,micropumps,energy harvesters,and solid-state re-frigeration[8-10].Among the alloys,Ni-Mn-Sn-based alloys are environment-friendly and cost-effective[6,7,11],and hence,they have received widespread attention.
文摘A Co-free as-cast AlCrAlCrFe_(2)Ni_(2)medium entropy alloy(MEA)with multi-phases was remelted by fiber laser in this study.The effect of laser remelting on the microstructure,phase distribution and mechanical properties was investigated by characterizing the as-cast and the remelted AlCrAlCrFe_(2)Ni_(2)alloy.The laser remelting process resulted in a significant decrease of grain size from about 780μm to 58.89μm(longitudinal section)and 15.87μm(transverse section)and an increase of hardness from 4.72±0.293 GPa to 6.40±0.147 GPa(longitudinal section)and 7.55±0.360 GPa(transverse section).It was also found that the long side plate-like microstructure composed of FCC phase,ordered B2 phase and disordered BCC phase in the as-cast alloy was transformed into nano-size weave-like microstructure consisting of alternating ordered B2 and disordered BCC phases.The mechanical properties were evaluated by the derived stressstrain relationship obtained from nano-indentation tests data.The results showed that the yield stress increased from 661.9 MPa to 1347.6 MPa(longitudinal section)and 1647.2 MPa(transverse section)after remelting.The individual contribution of four potential strengthening mechanisms to the yield strength of the remelted alloy was quantitatively evaluated,including grain boundary strengthening,dislocation strengthening,solid solution strengthening and precipitation strengthening.The calculation results indicated that dislocation and precipitation are dominant strengthening mechanisms in the laser remelted MEA.
基金the National Natural Science Foundation of China(Nos.52171154,and 51871076)the National Key Research and Development Programs of China(Nos.2018YFB1105200 and 2019YFA0209904)+1 种基金the Guangdong Province Basic and Applied Research Key Projects(Nos.2020190718102)the National Key R&D Programme,Ministry of Science and Technology of China(No.2019YFA0209)。
文摘Additively manufactured(AM)metallic materials commonly possess substantial tensile surface residual stress,which is detrimental to the load-bearing service behavior.Recently,we demonstrated that deep cryogenic treatment(DCT)is an effective method for improving the tensile properties of CoCrFeMnNi high-entropy alloy(HEA)samples fabricated by laser melting deposition(LMD),by introducing high compressive residual stress and deformation microstructures without destroying the AM shape.However,carrying out the DCT in a single-step mode does not improve the residual stress gradients inherent from the LMD process,which are undesirable as the mechanical properties will not be homogeneous within the sample.In this work,we show that carrying out the DCT in a cyclic mode with repeated cryogenic cooling and reheating can significantly homogenize the residual stress in LMD-fabricated Co Cr Fe Mn Ni HEA,and improve tensile strength and ductility,compared with single-step DCT of the same cryogenic soaking duration.Under cyclic DCT,the thermal stress is re-elevated to a high value at each cryogenic cooling step,leading to the formation of denser and more intersecting reinforcing crystalline defects and hcp phase transformation,compared to single-step DCT of the same total cryogenic soaking duration in which the thermal stress relaxes towards a low value over time.The enhancement of defect formation in the cyclic mode of DCT also leads to more uniform residual stress distribution in the sample after the DCT.The results here provide important insights on optimizing DCT processes for post-fabrication improvement of mechanical properties of AM metallic net shapes.
基金The support from the National Natural Science Foundation of China(No.51971083)the Natural Science Foundation of Heilongjiang Province,China(YQ 2020E007)is gratefully acknowledgedfinancially sponsored by Heilongjiang Touyan Team Program.
文摘Constructing heterojunctions and hollow multi-shelled structures can render materials with fascinating physicochemical properties,and have been regarded as two promising strategies to overcome the severe shuttling and sluggish kinetics of polysulfide in lithium-sulfur(Li-S)batteries.However,a single strategy can only take limited effect.Modulating catalytic hosts with synergistic effects are urgently desired.Herein,Mn_(3)O_(4)-MnS heterogeneous multi-shelled hollow spheres are meticulously designed by controlled sulfuration of Mn2O3 hollow spheres,and then applied as advanced encapsulation hosts for Li-S batteries.Benefiting from the separated spatial confinement by hollow multi-shelled structure,ample exposed active sites and built-in electric field by heterogeneous interface,and synergistic effects between Mn_(3)O_(4)(strong adsorption)and MnS(fast conversion)components,the assembled battery achieves prominent rate capability and decent cyclability(0.016%decay per cycle at 2 C,1000 cycles).More crucially,satisfactory areal capacity reaches up to 7.1 mAh cm^(-2)even with high sulfur loading(8.0 mg cm^(-2))and lean electrolyte(E/S=4.0 pL mg^(-1))conditions.This work will provide inspiration for the rational design of hollow multi-shelled heterostructure for various electrocatalysis applications.
基金supported by the National Natural Science Foundation of China under Grant Nos.U22A2025,U19A2059,61732003,61832003,U1811461,and 62102119the Key Research and Development Projects of the Ministry of Science and Technology of China under Grant No.2019YFB2101902.
文摘With the widespread deployment of indoor positioning systems, an unprecedented scale of indoor trajectories is being produced. By considering the inherent uncertainties and the text information contained in such an indoor trajectory, a new definition named Indoor Uncertain Semantic Trajectory is defined in this paper. In this paper, we focus on a new primitive, yet quite essential query named Indoor Uncertain Semantic Trajectory Similarity Join (IUST-Join for short), which is to match all similar pairs of indoor uncertain semantic trajectories from two sets. IUST-Join targets a number of essential indoor applications. With these applications in mind, we provide a purposeful definition of an indoor uncertain semantic trajectory similarity metric named IUS. To process IUST-Join more efficiently, both an inverted index on indoor uncertain semantic trajectories named 3IST and the first acceleration strategy are proposed to form a filtering-and-verification framework, where most invalid pairs of indoor uncertain semantic trajectories are pruned at quite low computation cost. And based on this filtering-and-verification framework, we present a highly-efficient algorithm named Indoor Uncertain Semantic Trajectory Similarity Join Processing (USP for short). In addition, lots of novel and effective acceleration strategies are proposed and embedded in the USP algorithm. Thanks to these techniques, both the time complexity and the time overhead of the USP algorithm are further reduced. The results of extensive experiments demonstrate the superior performance of the proposed work.
基金work was supported by the National Thousand a Young Talents Program of China,the Fundamental Research Funds for the Central Universities(2018KFYXKJC009)the National Natural Science Foundation of China(51871076)the NSFC of Hubei(Grant 2021CFB420).
文摘Even in their bulk forms,complex alloys like high-entropy alloys(HEAs)exhibit favorable activity and stability as electrocatalysts for the oxygen evolution reaction(OER).However,the underlying reasons are not yet fully understood.In a family of Mo-doped CrFeCoNi-based HEAs,we have identified three crucial factors that govern their performance:(i)homogeneous solid solution phase of HEAs helps to maintain high-valence states of metals;(ii)surface reconstruction results in a hybrid material comprising amorphous domains and percolated crystalline structures;(iii)diversity of active intermediate species(M–O,M–OOH,and,notably,the abundance of superoxideμ–OO),which display stronger adsorption capacity on the reconstructed surface.These results are revealing due to their resemblance to findings in other families of electrocatalysts for OER,as well as their unique features specific to HEAs.In line with these factors,a CrFeCoNiMo0.2 bulk integrated electrode displays a low overpotential of 215 mV,rapid kinetics,and long-term stability of over 90 d.Bulk HEAs hold great potential for industrial applications.
