A self-developed crack-free advanced superalloy ZGH451 fabricated by direct energy deposition(DED)was applied to investigate the microstructure evolution,stress rupture behavior,and deformation mech-anisms at moderate...A self-developed crack-free advanced superalloy ZGH451 fabricated by direct energy deposition(DED)was applied to investigate the microstructure evolution,stress rupture behavior,and deformation mech-anisms at moderate-high temperatures and high-low stress conditions.The high Ta/Al ratio induces large misfit lattice stress and low stacking fault energy of alloy,resulting in approximate cubicγ′phases in dendrites and the formation of initial dislocation tangles.After the stress rupture test at 760℃/780 MPa,high content cubicγ′phases,small size of voids as well as preserved dislocation tangles are observed,showing stable structures with high-stress rupture resistance.High content and suitable size of cubicγ′phases,initial dislocation tangles,and L-C locks hinder the dislocation motion,which decreases the minimum strain rate and prolongs life significantly,forming four stress rupture stages.Hence,the defor-mation mechanism is determined by dislocation piled-up onγ/γ′interface,formation of stacking faults inγ′phases,and dislocations shearingγ′phases.However,the microstructure exhibits uneven struc-tures composed of large sizes of raftedγ′phases and voids at 980℃/260 MPa.The rafted structure and high temperature provide continuous channels and enough energy for dislocation motion,resulting in the increase of minimum strain rate,decline of life,and typic three stress rupture stages,even though there are obstacles to dislocation movement caused by dislocation networks.The deformation mecha-nism transforms to form dislocation networks onγ/γ′interface and dislocations shearingγ′phases.Be-sides,the decomposition of carbides on GBs also depends on temperature,which decomposes into harm-ful chain-like M23 C6 carbides at moderate temperatures and reinforced granular-shaped M6 C carbides at high temperatures.The applied stress always decreases mechanical properties due to its degradation of microstructure induced by elongating the precipitates and defects.展开更多
Centrifugal casting of ductile iron pipe is a high-temperature,semi-continuous production process.However,conducting laboratory research on the solidification process of centrifugal casting of ductile iron pipe presen...Centrifugal casting of ductile iron pipe is a high-temperature,semi-continuous production process.However,conducting laboratory research on the solidification process of centrifugal casting of ductile iron pipe presents significant challenges.In this study,a novel research method was introduced for investigating the solidification process of ductile iron pipe,namely thermal simulation of ductile iron pipe.Comparative research was conducted on the microstructure and properties of the thermal simulation sample and the ductile iron pipe.The findings indicate that the thermal simulation sample and ductile iron pipe exhibit good heat transfer similarity and microstructure similarity.The difference of cooling rate between thermal simulation sample and ductile pipe is less than 0.24℃·s^(-1),and the difference of microstructure content of free cementite,ferrite,and pearlite is less than 5%.The tensile strength of annealed ductile iron pipe is 466 MPa,with an elongation of 16.1%and a Brinell hardness of 156.5 HBW.In comparison,the tensile strength of annealed thermal simulation sample is 482.0 MPa,with an elongation of 15.5%and a Brinell hardness of 159.0 HBW.These results suggest that the thermal simulation experimental research method is both scientific and feasible,offering an objective,reliable,and cost-effective approach to laboratory research on ductile iron pipe.展开更多
Spinal cord injury(SCI)is a debilitating ailment that leads to the loss of motor and sensory functions,often leaving the patient paralyzed below the injury site(Chen et al.,2013).Globally around 250,000-300,000 people...Spinal cord injury(SCI)is a debilitating ailment that leads to the loss of motor and sensory functions,often leaving the patient paralyzed below the injury site(Chen et al.,2013).Globally around 250,000-300,000 people are diagnosed with SCI annually(Singh et al.,2014),and while this number appears quite low,the effect that an SCI has on the patient’s quality of life is drastic,due to the current difficulties to comprehensively treat this illness.The cost of patient care can also be quite costly,amounting to an estimated$1.69 billion in healthcare costs in the USA alone(Mahabaleshwarkar and Khanna,2014).展开更多
Metal sulphide electrocatalyst is considered as one of the most promising low-cost candidates for oxygen evolution reaction(OER).In this work,we report a novel free-standing Cu2S branch array via a facile TiO2-induced...Metal sulphide electrocatalyst is considered as one of the most promising low-cost candidates for oxygen evolution reaction(OER).In this work,we report a novel free-standing Cu2S branch array via a facile TiO2-induced electrodeposition-sulfurization method.Interestingly,cross-linked Cu2S nanoflake branch is strongly anchored on the TiO2 backbone forming high-quality Cu2S/TiO2/Cu2S core-branch arrays.The branch formation mechanism is also proposed.As compared to the pure Cu2S nanowire arrays,the asprepared Cu2S/TiO2/Cu2S core-branch arrays show much better alkaline OER performance with lower overpotential(284 mV at 10 mA cm^-2)and smaller Tafel slope(72 dec-1)as well as enhanced longterm durability mainly due to larger exposed area and more active electrocatalytic sites.Our work provides a new way for construction of advanced metal sulphide electrocatalysts for electrochemical energy conversion.展开更多
As prospective energy storage devices,zinc-ion hybrid capacitors(ZHCs)still suffer from unsatisfactory cathode materials.Herein,the three dimensional(3D)N,B dual-doped carbon quantum dots/reduced graphene oxide(N,B-CQ...As prospective energy storage devices,zinc-ion hybrid capacitors(ZHCs)still suffer from unsatisfactory cathode materials.Herein,the three dimensional(3D)N,B dual-doped carbon quantum dots/reduced graphene oxide(N,B-CQDs/rGO)composite aerogel is prepared via a onepot hydrothermal method.Thanks to the synergism of CQDs modification and N,B dual-doping,the resultant N,B-CQDs/rGO composite aerogel delivers superior electrochemical properties.Furthermore,the as-obtained N,B-CQDs/rGO composite aerogel is served as a cathode for aqueous and flexible quasi-solid-state ZHCs for the first time.Impressively,the aqueous N,B-CQDs/rGO//Zn ZHC manifests a large energy density of 96.2 Wh·kg^(-1)at80 W·kg^(-1)and still remains a high energy density of 54.7Wh·kg^(-1)at a superb power density of 80 kW·kg^(-1).Meanwhile,kinetic analyses are employed to elucidate the prominent power performance,and various ex situ tests are undertaken to explore the energy storage mechanism of aqueous ZHC.More notably,the flexible quasi-solid-state N,B-CQDs/rGO//Zn ZHC displays a desirable energy density(89.1μWh·cm^(-2)),a superior power density(96,000μW·cm^(-2))and exceptional flexible performance.The present study offers a valuable reference for designing and developing advanced cathode materials for aqueous and flexible quasi-solid-state ZHCs.展开更多
Anions in the electrolyte are usually ignored in conventional"rocking-chair"batteries because only cationic de-/intercalation is considered.An ingenious scheme combining LiMn_(0.7)Fe_(0.3)PO_(4)(LMFP@C)and g...Anions in the electrolyte are usually ignored in conventional"rocking-chair"batteries because only cationic de-/intercalation is considered.An ingenious scheme combining LiMn_(0.7)Fe_(0.3)PO_(4)(LMFP@C)and graphite as a hybrid cathode for lithium-ion batteries(LIBs)is elaborately designed in order to exploit the potential value of anions for battery performance.The hybrid cathode has a higher conductivity and energy density than any of the individual components,allowing for the co-utilization of cations and an-ions through the de-/intercalation of Li^(+)and PF_(6)−over a wide voltage range.The optimal compound with a weight mix ratio of LMFP@C:graphite=5:1 can deliver the highest specific capacity of nearly 140 mA h/g at 0.1 C and the highest voltage plateau of around 4.95 V by adjusting the appropriate mixing ratio.In addition,cyclic voltammetry was used to investigate the electrode kinetics of Li^(+)and PF_(6)−dif-fusion in the hybrid compound at various scan rates.In situ X-ray diffraction is also performed to further demonstrate the structural evolution of the hybrid cathode during the charge/discharge process.展开更多
Graphite as a promising anode candidate of K-ion batteries(KIBs)has been increasingly studied currently,but corresponding rate performance and cycling stability are usually inferior to amorphous carbon materials.To pr...Graphite as a promising anode candidate of K-ion batteries(KIBs)has been increasingly studied currently,but corresponding rate performance and cycling stability are usually inferior to amorphous carbon materials.To protect the layer structure and further boost performance,tempura-like carbon/carbon nanocomposite of graphite@pitch-derived S-doped carbon(G@PSC)is designed and prepared by a facile and low-temperature modified molten salt method.This robust encapsulation structure makes their respective advantages complementary to each other,showing mutual promotion of electrochemical performances caused by synergy effect.As a result,the G@PSC electrode is applied in KIBs,delivering impressive rate capabilities(465,408,370,332,290,and 227 m A h g^(-1)at 0.05,0.2,0.5,1,2,and 5 A g^(-1))and ultralong cyclic stability(163 m A g^(-1)remaining even after 8000 cycles at 2 A g^(-1)).On basis of ex-situ studies,the sectionalized K-storage mechanism with adsorption(pseudocapacitance caused by S doping)-intercalation(pitch-derived carbon and graphite)pattern is revealed.Moreover,the exact insights into remarkable rate performances are taken by electrochemical kinetics tests and density functional theory calculation.In a word,this study adopts a facile method to synthesize high-performance carbon/carbon nanocomposite and is of practical significance for development of carbonaceous anode in KIBs.展开更多
1.Introduction Zirconium(Zr)and its alloys show great applications in nuclear and chemical industry thanks to their appropriate mechanical properties,low thermal neutron absorption cross-section and excellent corrosio...1.Introduction Zirconium(Zr)and its alloys show great applications in nuclear and chemical industry thanks to their appropriate mechanical properties,low thermal neutron absorption cross-section and excellent corrosion resistance[1–3].Zr displays three different crystal structures on the temperature-pressure phase diagram:the hexagonal close-packed structure(HCP,α-Zr),the body centered cubic structure(BCC,β-Zr)and the simple hexagonal structure(ω-Zr).展开更多
Mechanism of FCC→HCP reverse phase transformation in face-centered cubic zirconium(FCC-Zr)along with a concomitant 70.5°rotation ofα-Zr matrix were investigated in zircaloy-4(Zr-4)cladding tube by using transmi...Mechanism of FCC→HCP reverse phase transformation in face-centered cubic zirconium(FCC-Zr)along with a concomitant 70.5°rotation ofα-Zr matrix were investigated in zircaloy-4(Zr-4)cladding tube by using transmission electron microscopy(TEM).Results showed that the interaction among a secondary phase particle(SPP)and three FCC-Zr grains resulted in the formation of cross stacking faults in SPP and exerted a drag force on minor axis of the adjacent FCC-Zr phase.Moreover,when the shear stress along[112]_(FCC-Zr)direction was large enough to initiate the emission of 1/6[112]Shockley partial dislocation on every other(111)_(FCC-Zr)close-packed plane,the stacking sequence would change from ABC ABCA to AB ABABA viz.(0001)planes of the daughter HCP phase.Thus,FCC→HCP reverse phase transformation in FCC-Zr was presented.展开更多
With its unique 3D skeleton structure and exceptional cyclic stability,the Na^(+)superionic conducto(NASICON)-type Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF)has been con sidered as a competitive cathode material for advanced ...With its unique 3D skeleton structure and exceptional cyclic stability,the Na^(+)superionic conducto(NASICON)-type Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF)has been con sidered as a competitive cathode material for advanced Na ion batteries.However,the release of fluorine during th heat treatment leads to the formation of an additional phas Na_(3)V_(2)(PO_(4))_(3)(NVP),which results in a low-voltage plateau and compromises the energy density.Herein,we modulat the local electronic states of the V site by aluminum sub stitution to strengthen the stability of F.The results confirm that the aluminum introduction not only changes the loca electron states of V sites,significantly reducing the for mation of NVP by-product from 6.71 wt%to 1.01 wt%but also effectively reduces the band gap,improving th electronic conductivity of NVPF.The optimized Na_(3)V_(1.9)Al_(0.1)(PO_(4))_(2)F_(3)exhibits higher energy density of 340 Wh·kg^(-1)and excellent rate performance of 106.7 mAh·g^(-1)at 10C compared with the pristine cathode.展开更多
The authors regret that the Fig.S3 in supporting information of this published article needs to be revised.And the BET values are correct and unaffected.All the conclusions in the manuscript are unaffected by this uni...The authors regret that the Fig.S3 in supporting information of this published article needs to be revised.And the BET values are correct and unaffected.All the conclusions in the manuscript are unaffected by this unintentional error.展开更多
Biomass carbon and small redox biomolecules are attractive materials for green,sustainable energy storage devices owing to their environmentally friendly,low-cost,scalable,and novel sources.However,most devices manufa...Biomass carbon and small redox biomolecules are attractive materials for green,sustainable energy storage devices owing to their environmentally friendly,low-cost,scalable,and novel sources.However,most devices manufactured using these materials have low specific capacitance,poor cycle stability,short lifetime,complexity,and low precision of device fabrication.Herein,we report the directed self-assembly of mononuclear anthraquinone(MAQ)derivatives and porous lignin-based graphene oxide(PLGO)into a renewable colloidal gel through noncovalent interactions.These self-assembled gel electrode materials exhibited high capacitance(484.8 F g^(−1) at a current density of 1 A g^(−1))and could be further printed as flexible micro-supercapacitors(FMSCs)with arbitrary patterns and a relatively high resolution on specific substrates.The FMSCs exhibited excellent areal capacitance(43.6 mF cm^(−2)),energy and power densities(6.1μWh cm^(−2) and 50μW cm^(−2),respectively),and cycle stability(>10,000 cycles).Furthermore,the printed FMSCs and integrated FMSC arrays exhibited remarkable flexibility while maintaining a stable capacitance.The proposed approach can be applied to other quinone biomolecules and biomass-based carbon materials.This study provides a basis for fabricating green and sustainable energy storage device architectures with high capacitance,long-term cycling,high scalability,and high precision.展开更多
The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electrom...The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electromagnetic component regulation,layered arrangement structure,and gradient concentration distribution was used to optimize impedance matching and enhance electromagnetic loss.On the microscale,the incorporation of magnetic Ni nanoparticles into MXene nanosheets(Ni@MXene)endows suitable intrinsic permittivity and permeability.On the macroscale,the layered arrangement of Ni@MXene increases the effective interaction area with electromagnetic waves,inducing multiple reflection/scattering effects.On this basis,according to the analysis of absorption,reflection,and transmission(A-R-T)power coefficients of layered composites,the gradient concentration distribution was constructed to realize the impedance matching at low-concentration surface layer,electromagnetic loss at middle concentration interlayer and microwave reflection at high-concentration bottom layer.Consequently,the layered gradient composite(LG5-10-15)achieves complete absorption coverage of X-band at thickness of 2.00-2.20 mm with RL_(min) of-68.67 dB at 9.85 GHz in 2.05 mm,which is 199.0%,12.6%,and 50.6%higher than non-layered,layered and layered descending gradient composites,respectively.Therefore,this work confirms the importance of layered gradient structure in improving absorption performance and broadens the design of high-performance microwave absorption materials.展开更多
Optoelectronic memristor is generating growing research interest for high efficient computing and sensing-memory applications.In this work,an optoelectronic memristor with Au/a-C:Te/Pt structure is developed.Synaptic ...Optoelectronic memristor is generating growing research interest for high efficient computing and sensing-memory applications.In this work,an optoelectronic memristor with Au/a-C:Te/Pt structure is developed.Synaptic functions,i.e.,excita-tory post-synaptic current and pair-pulse facilitation are successfully mimicked with the memristor under electrical and optical stimulations.More importantly,the device exhibited distinguishable response currents by adjusting 4-bit input electrical/opti-cal signals.A multi-mode reservoir computing(RC)system is constructed with the optoelectronic memristors to emulate human tactile-visual fusion recognition and an accuracy of 98.7%is achieved.The optoelectronic memristor provides potential for developing multi-mode RC system.展开更多
The enhancement of the intensity of red upconversion(UC)emission has significant implications for biological applications.In KZnF_(3):Yb^(3+),Er^(3+)which inherently produces high-purity red emission,the introduction ...The enhancement of the intensity of red upconversion(UC)emission has significant implications for biological applications.In KZnF_(3):Yb^(3+),Er^(3+)which inherently produces high-purity red emission,the introduction of Fe^(3+)markedly improves the UC intensity by a factor of 13.The mechanism behind the enhanced UC red luminescence is deduced to originate from the Yb^(3+)-Fe^(3+)dimer,as determined by first principle calculation and analysis of UC luminescence properties.The thermometry performance,based on splitting peaks of red emission,demonstrated enhanced temperature sensitivity at lower ranges.Exploring the photothermal properties,it was observed that temperature exhibited a linear correlation with pump power under a 980 nm laser,achieving levels up to 48℃.This temperature range is ideal for applications in mild photothermal therapy(MPTT).This work elucidates the material’s potential in advanced biological applications,merging optical thermometry and photothermics,indicating its multifunctional utility.展开更多
Herein,we report the self-sacrificial template strategy to design mesoporous layered CeVWO_(x)/TiO_(2)catalysts for the selective catalytic reduction of NO by NH_(3)(NH_(3)-SCR).As-fabricated CeVWO_(x)/TiO_(2)catalyst...Herein,we report the self-sacrificial template strategy to design mesoporous layered CeVWO_(x)/TiO_(2)catalysts for the selective catalytic reduction of NO by NH_(3)(NH_(3)-SCR).As-fabricated CeVWO_(x)/TiO_(2)catalysts with unique mesoporous and layered structure were successfully prepared through the synthesis of Ce,Ti-MOFs by solvothermal method,the impregnation of vanadium and tungsten in Ce,Ti-MOFs and high temperature calcination process.As NH_(3)-SCR catalysts,well-designed CeVWO_(x)/TiO_(2)catalysts exhibit excellent SCR activity with the NO_(x)conversion of over 90%between 210 and 470℃.Meanwhile,CeVWO_(x)/TiO_(2)shows superior tolerance to water vapor and SO_(2).The features of unique mesoporous layered nanostructure,surface acidity,tunable reducibility,active and the strong interaction of active metal oxide and support in CeVWO_(x)/TiO_(2)nanosheets should contribute to the improved SCR performance.In situ diffuse reflection infrared Fourier transform spectroscopy(DRIFTS)analysis indicates that both Langmuir-Hinshelwood(L-H)and Eley-Rideal(E-R)mechanisms are present on the surface of CeVWO_(x)/TiO_(2)at low temperature.This work offers a facile strategy to design and fabricate efficient 2D deNO_x catalyst.展开更多
Herein,a novel Janus-structured multifunctional membrane with integrated electromagnetic interference(EMI)shielding and personalized thermal management is fabricated using shear-induced in situ fibrillation and vacuum...Herein,a novel Janus-structured multifunctional membrane with integrated electromagnetic interference(EMI)shielding and personalized thermal management is fabricated using shear-induced in situ fibrillation and vacuum-assisted filtration.Interestingly,within the polytetrafluoroethylene(PTFE)-carbon nanotube(CNT)-Fe_(3)O_(4)layer(FCFe),CNT nanofibers interweave with PTFE fibers to form a stable“silk-like”structure that effectively captures Fe_(3)O_(4)particles.By incorporating a highly conductive MXene layer,the FCFe/MXene(FCFe/M)membrane exhibits excellent electrical/thermal conductivity,mechanical properties,and flame retardancy.Impressively,benefiting from the rational regulation of component proportions and the design of a Janus structure,the FCFe/M membrane with a thickness of only 84.9μm delivers outstanding EMI shielding effectiveness of 44.56 dB in the X-band,with a normalized specific SE reaching 10,421.3 dB cm^(2)g^(-1),which is attributed to the“absorption-reflection-reabsorption”mechanism.Furthermore,the membrane demonstrates low-voltage-driven Joule heating and fast-response photothermal performance.Under the stimulation of a 3 V voltage and an optical power density of 320 mW cm^(-2),the surface temperatures of the FCFe/M membranes can reach up to 140.4 and 145.7℃,respectively.In brief,the FCFe/M membrane with anti-electromagnetic radiation and temperature regulation is an attractive candidate for the next generation of wearable electronics,EMI compatibility,visual heating,thermotherapy,and military and aerospace applications.展开更多
To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based sim...To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.展开更多
With the rapid development of wearable electronic skin technology, flexible strain sensors have shown great application prospects in the fields of human motion and physiological signal detection, medical diagnostics, ...With the rapid development of wearable electronic skin technology, flexible strain sensors have shown great application prospects in the fields of human motion and physiological signal detection, medical diagnostics, and human-computer interaction owing to their outstanding sensing performance. This paper reports a strain sensor with synergistic conductive network, consisting of stable carbon nanotube dispersion (CNT) layer and brittle MXene layer by dip-coating and electrostatic self-assembly method, and breathable three-dimensional (3D) flexible substrate of thermoplastic polyurethane (TPU) fibrous membrane prepared through electrospinning technology. The MXene/CNT@PDA-TPU (MC@p-TPU) flexible strain sensor had excellent air permeability, wide operating range (0–450 %), high sensitivity (Gauge Factor, GFmax = 8089.7), ultra-low detection limit (0.05 %), rapid response and recovery times (40 ms/60 ms), and excellent cycle stability and durability (10,000 cycles). Given its superior strain sensing capabilities, this sensor can be applied in physiological signals detection, human motion pattern recognition, and driving exoskeleton robots. In addition, MC@p-TPU fibrous membrane also exhibited excellent photothermal conversion performance and can be used as a wearable photo-heater, which has far-reaching application potential in the photothermal therapy of human joint diseases.展开更多
Van der Waals(vdW)ferroelectric-semiconductor heterojunction provides reconfigurable band alignment based on optical/electrical-assisted polarization switching,which shows great potential to construct artificial visua...Van der Waals(vdW)ferroelectric-semiconductor heterojunction provides reconfigurable band alignment based on optical/electrical-assisted polarization switching,which shows great potential to construct artificial visual neural systems.However,the mechanical exfoliation fabrication scheme for proof-of-concept demonstrations and fundamental studies is cumbersome and not scalable for practical application.Here,we present a synthetic strategy for the large-scale and high crystallinity growth of planar/verticalα-In_(2)Se_(3)/MoS_(2)heterojunctions by dynamically tuning the growth temperature.Furthermore,based on theα-In_(2)Se_(3)/MoS_(2)heterostructures,photo-synapse devices are designed and fabricated to simulate visual neural systems functions,including multistate storage,optical logic operation,potentiation and depression,paired-pulse facilitation(PPF),short-term memory(STM),long-term memory(LTM),and Learning-Forgetting-Relearning.By coupling the spatiotemporally relevant optical and electric information,the device can mimic the superior biological visual system’s light adaptation and Pavlovian conditioning.This work provides a strategy for dynamically tuning the orientation of ferroelectric-semiconductor heterojunction stacks and will give impetus to applying all-in-one sensing and memory-computing artificial vision systems.展开更多
基金financially supported by the Technology Area Fund of the Basic Strengthening Program(No.2021-JCJQ-JJ-0092)the Science Center for Gas Turbine Project(Project No.P2022-C-Ⅳ-002-001)+2 种基金the Defense Industrial Technology Development Program(No.JCKY2020130C024)the National Key R&D Program of China(Grant No.2021YFB3702503)the National Science and Tech-nology Major Project(No.Y2019-VII-0011-0151).
文摘A self-developed crack-free advanced superalloy ZGH451 fabricated by direct energy deposition(DED)was applied to investigate the microstructure evolution,stress rupture behavior,and deformation mech-anisms at moderate-high temperatures and high-low stress conditions.The high Ta/Al ratio induces large misfit lattice stress and low stacking fault energy of alloy,resulting in approximate cubicγ′phases in dendrites and the formation of initial dislocation tangles.After the stress rupture test at 760℃/780 MPa,high content cubicγ′phases,small size of voids as well as preserved dislocation tangles are observed,showing stable structures with high-stress rupture resistance.High content and suitable size of cubicγ′phases,initial dislocation tangles,and L-C locks hinder the dislocation motion,which decreases the minimum strain rate and prolongs life significantly,forming four stress rupture stages.Hence,the defor-mation mechanism is determined by dislocation piled-up onγ/γ′interface,formation of stacking faults inγ′phases,and dislocations shearingγ′phases.However,the microstructure exhibits uneven struc-tures composed of large sizes of raftedγ′phases and voids at 980℃/260 MPa.The rafted structure and high temperature provide continuous channels and enough energy for dislocation motion,resulting in the increase of minimum strain rate,decline of life,and typic three stress rupture stages,even though there are obstacles to dislocation movement caused by dislocation networks.The deformation mecha-nism transforms to form dislocation networks onγ/γ′interface and dislocations shearingγ′phases.Be-sides,the decomposition of carbides on GBs also depends on temperature,which decomposes into harm-ful chain-like M23 C6 carbides at moderate temperatures and reinforced granular-shaped M6 C carbides at high temperatures.The applied stress always decreases mechanical properties due to its degradation of microstructure induced by elongating the precipitates and defects.
基金financially supported by the National Natural Science Foundation of China(52130109)。
文摘Centrifugal casting of ductile iron pipe is a high-temperature,semi-continuous production process.However,conducting laboratory research on the solidification process of centrifugal casting of ductile iron pipe presents significant challenges.In this study,a novel research method was introduced for investigating the solidification process of ductile iron pipe,namely thermal simulation of ductile iron pipe.Comparative research was conducted on the microstructure and properties of the thermal simulation sample and the ductile iron pipe.The findings indicate that the thermal simulation sample and ductile iron pipe exhibit good heat transfer similarity and microstructure similarity.The difference of cooling rate between thermal simulation sample and ductile pipe is less than 0.24℃·s^(-1),and the difference of microstructure content of free cementite,ferrite,and pearlite is less than 5%.The tensile strength of annealed ductile iron pipe is 466 MPa,with an elongation of 16.1%and a Brinell hardness of 156.5 HBW.In comparison,the tensile strength of annealed thermal simulation sample is 482.0 MPa,with an elongation of 15.5%and a Brinell hardness of 159.0 HBW.These results suggest that the thermal simulation experimental research method is both scientific and feasible,offering an objective,reliable,and cost-effective approach to laboratory research on ductile iron pipe.
基金supported by the Irish Research Council under the Government of Ireland Postdoctoral Fellowship Project ID-GOIPD/2023/1431(to AS).
文摘Spinal cord injury(SCI)is a debilitating ailment that leads to the loss of motor and sensory functions,often leaving the patient paralyzed below the injury site(Chen et al.,2013).Globally around 250,000-300,000 people are diagnosed with SCI annually(Singh et al.,2014),and while this number appears quite low,the effect that an SCI has on the patient’s quality of life is drastic,due to the current difficulties to comprehensively treat this illness.The cost of patient care can also be quite costly,amounting to an estimated$1.69 billion in healthcare costs in the USA alone(Mahabaleshwarkar and Khanna,2014).
基金supported by the National Natural Science Foundation of China(Grant Nos.51728204 and 51772272)Fundamental Research Funds for the Central Universities(Grant No.2018QNA4011)+1 种基金Qianjiang Talents Plan D(QJD1602029)Startup Foundation for Hundred-Talent Program of Zhejiang University
文摘Metal sulphide electrocatalyst is considered as one of the most promising low-cost candidates for oxygen evolution reaction(OER).In this work,we report a novel free-standing Cu2S branch array via a facile TiO2-induced electrodeposition-sulfurization method.Interestingly,cross-linked Cu2S nanoflake branch is strongly anchored on the TiO2 backbone forming high-quality Cu2S/TiO2/Cu2S core-branch arrays.The branch formation mechanism is also proposed.As compared to the pure Cu2S nanowire arrays,the asprepared Cu2S/TiO2/Cu2S core-branch arrays show much better alkaline OER performance with lower overpotential(284 mV at 10 mA cm^-2)and smaller Tafel slope(72 dec-1)as well as enhanced longterm durability mainly due to larger exposed area and more active electrocatalytic sites.Our work provides a new way for construction of advanced metal sulphide electrocatalysts for electrochemical energy conversion.
基金financially supported by the Distinguished Young Scientists of Hunan Province(No.2022JJ10024)the National Natural Science Foundation of China(No.21601057)+1 种基金the Natural Science Foundation of Hunan Province(No.2021JJ30216)Key Projects of Hunan Provincial Education Department(No.22A0412)。
文摘As prospective energy storage devices,zinc-ion hybrid capacitors(ZHCs)still suffer from unsatisfactory cathode materials.Herein,the three dimensional(3D)N,B dual-doped carbon quantum dots/reduced graphene oxide(N,B-CQDs/rGO)composite aerogel is prepared via a onepot hydrothermal method.Thanks to the synergism of CQDs modification and N,B dual-doping,the resultant N,B-CQDs/rGO composite aerogel delivers superior electrochemical properties.Furthermore,the as-obtained N,B-CQDs/rGO composite aerogel is served as a cathode for aqueous and flexible quasi-solid-state ZHCs for the first time.Impressively,the aqueous N,B-CQDs/rGO//Zn ZHC manifests a large energy density of 96.2 Wh·kg^(-1)at80 W·kg^(-1)and still remains a high energy density of 54.7Wh·kg^(-1)at a superb power density of 80 kW·kg^(-1).Meanwhile,kinetic analyses are employed to elucidate the prominent power performance,and various ex situ tests are undertaken to explore the energy storage mechanism of aqueous ZHC.More notably,the flexible quasi-solid-state N,B-CQDs/rGO//Zn ZHC displays a desirable energy density(89.1μWh·cm^(-2)),a superior power density(96,000μW·cm^(-2))and exceptional flexible performance.The present study offers a valuable reference for designing and developing advanced cathode materials for aqueous and flexible quasi-solid-state ZHCs.
基金financially supported by the National Natural Science Foundation of China(No.91963118,and No.52173246)the Science Technology Program of Jilin Province(No.20200201066JC)the 111 Project(No.B13013)。
文摘Anions in the electrolyte are usually ignored in conventional"rocking-chair"batteries because only cationic de-/intercalation is considered.An ingenious scheme combining LiMn_(0.7)Fe_(0.3)PO_(4)(LMFP@C)and graphite as a hybrid cathode for lithium-ion batteries(LIBs)is elaborately designed in order to exploit the potential value of anions for battery performance.The hybrid cathode has a higher conductivity and energy density than any of the individual components,allowing for the co-utilization of cations and an-ions through the de-/intercalation of Li^(+)and PF_(6)−over a wide voltage range.The optimal compound with a weight mix ratio of LMFP@C:graphite=5:1 can deliver the highest specific capacity of nearly 140 mA h/g at 0.1 C and the highest voltage plateau of around 4.95 V by adjusting the appropriate mixing ratio.In addition,cyclic voltammetry was used to investigate the electrode kinetics of Li^(+)and PF_(6)−dif-fusion in the hybrid compound at various scan rates.In situ X-ray diffraction is also performed to further demonstrate the structural evolution of the hybrid cathode during the charge/discharge process.
基金the financial support from the National Natural Science Foundation of China(No.91963118)the 111 Project(No.B13013)supported by the Open Project Program of Key Laboratory of Preparation and Application of Environmental Friendly Materials(Jilin Normal University),Ministry of Education,China(No.2020004)。
文摘Graphite as a promising anode candidate of K-ion batteries(KIBs)has been increasingly studied currently,but corresponding rate performance and cycling stability are usually inferior to amorphous carbon materials.To protect the layer structure and further boost performance,tempura-like carbon/carbon nanocomposite of graphite@pitch-derived S-doped carbon(G@PSC)is designed and prepared by a facile and low-temperature modified molten salt method.This robust encapsulation structure makes their respective advantages complementary to each other,showing mutual promotion of electrochemical performances caused by synergy effect.As a result,the G@PSC electrode is applied in KIBs,delivering impressive rate capabilities(465,408,370,332,290,and 227 m A h g^(-1)at 0.05,0.2,0.5,1,2,and 5 A g^(-1))and ultralong cyclic stability(163 m A g^(-1)remaining even after 8000 cycles at 2 A g^(-1)).On basis of ex-situ studies,the sectionalized K-storage mechanism with adsorption(pseudocapacitance caused by S doping)-intercalation(pitch-derived carbon and graphite)pattern is revealed.Moreover,the exact insights into remarkable rate performances are taken by electrochemical kinetics tests and density functional theory calculation.In a word,this study adopts a facile method to synthesize high-performance carbon/carbon nanocomposite and is of practical significance for development of carbonaceous anode in KIBs.
文摘1.Introduction Zirconium(Zr)and its alloys show great applications in nuclear and chemical industry thanks to their appropriate mechanical properties,low thermal neutron absorption cross-section and excellent corrosion resistance[1–3].Zr displays three different crystal structures on the temperature-pressure phase diagram:the hexagonal close-packed structure(HCP,α-Zr),the body centered cubic structure(BCC,β-Zr)and the simple hexagonal structure(ω-Zr).
基金The authors appreciate Dr.Jinmin Liu and Dr.Xiaolan Wang for TEM measurements.
文摘Mechanism of FCC→HCP reverse phase transformation in face-centered cubic zirconium(FCC-Zr)along with a concomitant 70.5°rotation ofα-Zr matrix were investigated in zircaloy-4(Zr-4)cladding tube by using transmission electron microscopy(TEM).Results showed that the interaction among a secondary phase particle(SPP)and three FCC-Zr grains resulted in the formation of cross stacking faults in SPP and exerted a drag force on minor axis of the adjacent FCC-Zr phase.Moreover,when the shear stress along[112]_(FCC-Zr)direction was large enough to initiate the emission of 1/6[112]Shockley partial dislocation on every other(111)_(FCC-Zr)close-packed plane,the stacking sequence would change from ABC ABCA to AB ABABA viz.(0001)planes of the daughter HCP phase.Thus,FCC→HCP reverse phase transformation in FCC-Zr was presented.
基金supported by the National Natural Science Foundation of China(Nos.52064049 and52372232)the Major Science and Technology Projects of Yunnan Province(No.202302AB080019-3)+1 种基金the National Natural Science Foundation of Yunnan Province(Nos.202301AS070040 and202301AU070209)the Scientific Research Fund Project of Yunnan Provincial Department of Education(No.2023J0033)。
文摘With its unique 3D skeleton structure and exceptional cyclic stability,the Na^(+)superionic conducto(NASICON)-type Na_(3)V_(2)(PO_(4))_(2)F_(3)(NVPF)has been con sidered as a competitive cathode material for advanced Na ion batteries.However,the release of fluorine during th heat treatment leads to the formation of an additional phas Na_(3)V_(2)(PO_(4))_(3)(NVP),which results in a low-voltage plateau and compromises the energy density.Herein,we modulat the local electronic states of the V site by aluminum sub stitution to strengthen the stability of F.The results confirm that the aluminum introduction not only changes the loca electron states of V sites,significantly reducing the for mation of NVP by-product from 6.71 wt%to 1.01 wt%but also effectively reduces the band gap,improving th electronic conductivity of NVPF.The optimized Na_(3)V_(1.9)Al_(0.1)(PO_(4))_(2)F_(3)exhibits higher energy density of 340 Wh·kg^(-1)and excellent rate performance of 106.7 mAh·g^(-1)at 10C compared with the pristine cathode.
文摘The authors regret that the Fig.S3 in supporting information of this published article needs to be revised.And the BET values are correct and unaffected.All the conclusions in the manuscript are unaffected by this unintentional error.
基金supported by the National Natural Science Foundation of China(Grant Nos.21905069 and U21A20307)the Shenzhen Science and Technology Innovation Committee(Grant Nos.ZDSYS20190902093220279,KQTD20170809110344233,GXWD20201230155427003-20200821181245001,GXWD20201230155427003-20200821181809001,and ZX20200151)+1 种基金the Department of Science and Technology of Guangdong Province(Grant No.2020A1515110879)University Stable Support Foundation of Shenzhen(Grant No.GXWD20201230155427003-20200821181809001).
文摘Biomass carbon and small redox biomolecules are attractive materials for green,sustainable energy storage devices owing to their environmentally friendly,low-cost,scalable,and novel sources.However,most devices manufactured using these materials have low specific capacitance,poor cycle stability,short lifetime,complexity,and low precision of device fabrication.Herein,we report the directed self-assembly of mononuclear anthraquinone(MAQ)derivatives and porous lignin-based graphene oxide(PLGO)into a renewable colloidal gel through noncovalent interactions.These self-assembled gel electrode materials exhibited high capacitance(484.8 F g^(−1) at a current density of 1 A g^(−1))and could be further printed as flexible micro-supercapacitors(FMSCs)with arbitrary patterns and a relatively high resolution on specific substrates.The FMSCs exhibited excellent areal capacitance(43.6 mF cm^(−2)),energy and power densities(6.1μWh cm^(−2) and 50μW cm^(−2),respectively),and cycle stability(>10,000 cycles).Furthermore,the printed FMSCs and integrated FMSC arrays exhibited remarkable flexibility while maintaining a stable capacitance.The proposed approach can be applied to other quinone biomolecules and biomass-based carbon materials.This study provides a basis for fabricating green and sustainable energy storage device architectures with high capacitance,long-term cycling,high scalability,and high precision.
基金support for this work by Key Research and Development Project of Henan Province(Grant.No.241111232300)the National Natural Science Foundation of China(Grant.No.52273085 and 52303113)the Open Fund of Yaoshan Laboratory(Grant.No.2024003).
文摘The morphological distribution of absorbent in composites is equally important with absorbents for the overall electromagnetic properties,but it is often ignored.Herein,a comprehensive consideration including electromagnetic component regulation,layered arrangement structure,and gradient concentration distribution was used to optimize impedance matching and enhance electromagnetic loss.On the microscale,the incorporation of magnetic Ni nanoparticles into MXene nanosheets(Ni@MXene)endows suitable intrinsic permittivity and permeability.On the macroscale,the layered arrangement of Ni@MXene increases the effective interaction area with electromagnetic waves,inducing multiple reflection/scattering effects.On this basis,according to the analysis of absorption,reflection,and transmission(A-R-T)power coefficients of layered composites,the gradient concentration distribution was constructed to realize the impedance matching at low-concentration surface layer,electromagnetic loss at middle concentration interlayer and microwave reflection at high-concentration bottom layer.Consequently,the layered gradient composite(LG5-10-15)achieves complete absorption coverage of X-band at thickness of 2.00-2.20 mm with RL_(min) of-68.67 dB at 9.85 GHz in 2.05 mm,which is 199.0%,12.6%,and 50.6%higher than non-layered,layered and layered descending gradient composites,respectively.Therefore,this work confirms the importance of layered gradient structure in improving absorption performance and broadens the design of high-performance microwave absorption materials.
基金supported by the"Science and Technology Development Plan Project of Jilin Province,China"(Grant No.20240101018JJ)the Fundamental Research Funds for the Central Universities(Grant No.2412023YQ004)the National Natural Science Foundation of China(Grant Nos.52072065,52272140,52372137,and U23A20568).
文摘Optoelectronic memristor is generating growing research interest for high efficient computing and sensing-memory applications.In this work,an optoelectronic memristor with Au/a-C:Te/Pt structure is developed.Synaptic functions,i.e.,excita-tory post-synaptic current and pair-pulse facilitation are successfully mimicked with the memristor under electrical and optical stimulations.More importantly,the device exhibited distinguishable response currents by adjusting 4-bit input electrical/opti-cal signals.A multi-mode reservoir computing(RC)system is constructed with the optoelectronic memristors to emulate human tactile-visual fusion recognition and an accuracy of 98.7%is achieved.The optoelectronic memristor provides potential for developing multi-mode RC system.
基金supported by the Priority Academic Program Development of Jiangsu Higher Education Institutions(PAPD),"Qinglan Project"Young and Middle-aged Academic Leaders Program of Jiangsu Province,and the National Natural Science Foundation of China(General Program).
文摘The enhancement of the intensity of red upconversion(UC)emission has significant implications for biological applications.In KZnF_(3):Yb^(3+),Er^(3+)which inherently produces high-purity red emission,the introduction of Fe^(3+)markedly improves the UC intensity by a factor of 13.The mechanism behind the enhanced UC red luminescence is deduced to originate from the Yb^(3+)-Fe^(3+)dimer,as determined by first principle calculation and analysis of UC luminescence properties.The thermometry performance,based on splitting peaks of red emission,demonstrated enhanced temperature sensitivity at lower ranges.Exploring the photothermal properties,it was observed that temperature exhibited a linear correlation with pump power under a 980 nm laser,achieving levels up to 48℃.This temperature range is ideal for applications in mild photothermal therapy(MPTT).This work elucidates the material’s potential in advanced biological applications,merging optical thermometry and photothermics,indicating its multifunctional utility.
基金Project supported by National Key Research and Development Plan of China(2021YFB3802003,2022YFB3504102)the Key Research and Development Plan of Jiangsu Province(Social Development,BE2021713)+1 种基金the Six Talent Peaks Project of Jiangsu Province(JNHB-044)the Natural Science Foundation of Jiangsu Province of China(BK20160982)。
文摘Herein,we report the self-sacrificial template strategy to design mesoporous layered CeVWO_(x)/TiO_(2)catalysts for the selective catalytic reduction of NO by NH_(3)(NH_(3)-SCR).As-fabricated CeVWO_(x)/TiO_(2)catalysts with unique mesoporous and layered structure were successfully prepared through the synthesis of Ce,Ti-MOFs by solvothermal method,the impregnation of vanadium and tungsten in Ce,Ti-MOFs and high temperature calcination process.As NH_(3)-SCR catalysts,well-designed CeVWO_(x)/TiO_(2)catalysts exhibit excellent SCR activity with the NO_(x)conversion of over 90%between 210 and 470℃.Meanwhile,CeVWO_(x)/TiO_(2)shows superior tolerance to water vapor and SO_(2).The features of unique mesoporous layered nanostructure,surface acidity,tunable reducibility,active and the strong interaction of active metal oxide and support in CeVWO_(x)/TiO_(2)nanosheets should contribute to the improved SCR performance.In situ diffuse reflection infrared Fourier transform spectroscopy(DRIFTS)analysis indicates that both Langmuir-Hinshelwood(L-H)and Eley-Rideal(E-R)mechanisms are present on the surface of CeVWO_(x)/TiO_(2)at low temperature.This work offers a facile strategy to design and fabricate efficient 2D deNO_x catalyst.
基金support from the National Natural Science Foundation of China(NSFC,Grant No.52175341)Shandong Provincial Natural Science Foundation(Grant No.ZR2022JQ24)Funding Project of Jinan City’s New Twenty Items for Colleges and Universities(Grant No.202333038).
文摘Herein,a novel Janus-structured multifunctional membrane with integrated electromagnetic interference(EMI)shielding and personalized thermal management is fabricated using shear-induced in situ fibrillation and vacuum-assisted filtration.Interestingly,within the polytetrafluoroethylene(PTFE)-carbon nanotube(CNT)-Fe_(3)O_(4)layer(FCFe),CNT nanofibers interweave with PTFE fibers to form a stable“silk-like”structure that effectively captures Fe_(3)O_(4)particles.By incorporating a highly conductive MXene layer,the FCFe/MXene(FCFe/M)membrane exhibits excellent electrical/thermal conductivity,mechanical properties,and flame retardancy.Impressively,benefiting from the rational regulation of component proportions and the design of a Janus structure,the FCFe/M membrane with a thickness of only 84.9μm delivers outstanding EMI shielding effectiveness of 44.56 dB in the X-band,with a normalized specific SE reaching 10,421.3 dB cm^(2)g^(-1),which is attributed to the“absorption-reflection-reabsorption”mechanism.Furthermore,the membrane demonstrates low-voltage-driven Joule heating and fast-response photothermal performance.Under the stimulation of a 3 V voltage and an optical power density of 320 mW cm^(-2),the surface temperatures of the FCFe/M membranes can reach up to 140.4 and 145.7℃,respectively.In brief,the FCFe/M membrane with anti-electromagnetic radiation and temperature regulation is an attractive candidate for the next generation of wearable electronics,EMI compatibility,visual heating,thermotherapy,and military and aerospace applications.
基金financially supported by the National Natural Science Foundation of China(Grant Nos.52271317 and 52071149)the Fundamental Research Funds for the Central Universities(HUST:2019kfy XJJS007)。
文摘To address the problems of low accuracy by the CONWEP model and poor efficiency by the Coupled Eulerian-Lagrangian(CEL)method in predicting close-range air blast loads of cylindrical charges,a neural network-based simulation(NNS)method with higher accuracy and better efficiency was proposed.The NNS method consisted of three main steps.First,the parameters of blast loads,including the peak pressures and impulses of cylindrical charges with different aspect ratios(L/D)at different stand-off distances and incident angles were obtained by two-dimensional numerical simulations.Subsequently,incident shape factors of cylindrical charges with arbitrary aspect ratios were predicted by a neural network.Finally,reflected shape factors were derived and implemented into the subroutine of the ABAQUS code to modify the CONWEP model,including modifications of impulse and overpressure.The reliability of the proposed NNS method was verified by related experimental results.Remarkable accuracy improvement was acquired by the proposed NNS method compared with the unmodified CONWEP model.Moreover,huge efficiency superiority was obtained by the proposed NNS method compared with the CEL method.The proposed NNS method showed good accuracy when the scaled distance was greater than 0.2 m/kg^(1/3).It should be noted that there is no need to generate a new dataset again since the blast loads satisfy the similarity law,and the proposed NNS method can be directly used to simulate the blast loads generated by different cylindrical charges.The proposed NNS method with high efficiency and accuracy can be used as an effective method to analyze the dynamic response of structures under blast loads,and it has significant application prospects in designing protective structures.
基金supported by the National Natural Science Foundation of China(Nos.52373093 and 12072325)the Outstanding Youth Fund of Henan Province(No.242300421062)+1 种基金National Key R&D Program of China(No.2019YFA0706802)the 111 project(No.D18023).
文摘With the rapid development of wearable electronic skin technology, flexible strain sensors have shown great application prospects in the fields of human motion and physiological signal detection, medical diagnostics, and human-computer interaction owing to their outstanding sensing performance. This paper reports a strain sensor with synergistic conductive network, consisting of stable carbon nanotube dispersion (CNT) layer and brittle MXene layer by dip-coating and electrostatic self-assembly method, and breathable three-dimensional (3D) flexible substrate of thermoplastic polyurethane (TPU) fibrous membrane prepared through electrospinning technology. The MXene/CNT@PDA-TPU (MC@p-TPU) flexible strain sensor had excellent air permeability, wide operating range (0–450 %), high sensitivity (Gauge Factor, GFmax = 8089.7), ultra-low detection limit (0.05 %), rapid response and recovery times (40 ms/60 ms), and excellent cycle stability and durability (10,000 cycles). Given its superior strain sensing capabilities, this sensor can be applied in physiological signals detection, human motion pattern recognition, and driving exoskeleton robots. In addition, MC@p-TPU fibrous membrane also exhibited excellent photothermal conversion performance and can be used as a wearable photo-heater, which has far-reaching application potential in the photothermal therapy of human joint diseases.
基金supported by the National Natural Science Foundation of China(Nos.52371245,12174237,12241403)the National Key Research and Development Program of China(No.2022YFB3505301).
文摘Van der Waals(vdW)ferroelectric-semiconductor heterojunction provides reconfigurable band alignment based on optical/electrical-assisted polarization switching,which shows great potential to construct artificial visual neural systems.However,the mechanical exfoliation fabrication scheme for proof-of-concept demonstrations and fundamental studies is cumbersome and not scalable for practical application.Here,we present a synthetic strategy for the large-scale and high crystallinity growth of planar/verticalα-In_(2)Se_(3)/MoS_(2)heterojunctions by dynamically tuning the growth temperature.Furthermore,based on theα-In_(2)Se_(3)/MoS_(2)heterostructures,photo-synapse devices are designed and fabricated to simulate visual neural systems functions,including multistate storage,optical logic operation,potentiation and depression,paired-pulse facilitation(PPF),short-term memory(STM),long-term memory(LTM),and Learning-Forgetting-Relearning.By coupling the spatiotemporally relevant optical and electric information,the device can mimic the superior biological visual system’s light adaptation and Pavlovian conditioning.This work provides a strategy for dynamically tuning the orientation of ferroelectric-semiconductor heterojunction stacks and will give impetus to applying all-in-one sensing and memory-computing artificial vision systems.
