Photothermal energy conversion represents a cornerstone process in the renewable energy technologies domain,enabling the capture of solar irradiance and its subsequent transformation into thermal energy.This mechanism...Photothermal energy conversion represents a cornerstone process in the renewable energy technologies domain,enabling the capture of solar irradiance and its subsequent transformation into thermal energy.This mechanism is paramount across many applications,facilitating the exploitation of solar energy for different purposes.The photothermal conversion efficiency and applications are fundamentally contingent upon the characteristics and performance of the materials employed.Consequently,deploying high-caliber materials is essential for optimizing energy capture and utilization.Within this context,photothermal nanomaterials have emerged as pivotal components in various applications,ranging from catalysis and sterilization to medical therapy,desalination,and electric power generation via the photothermal conversion effect.This review endeavors to encapsulate the current research landscape,delineating both the developmental trajectories and application horizons of photothermal conversion materials.It aims to furnish a detailed exposition of the mechanisms underlying photothermal conversion across various materials,shedding light on the principles guiding the design of photothermal nanomaterials.Furthermore,addressing the prevailing challenges and outlooks within the field elucidates potential avenues for future research and identifying priority areas.This review aspires to enrich the understanding of photothermal materials within the framework of energy conversion,offering novel insights and fostering a more profound comprehension of their role and potential in harnessing solar energy.展开更多
In this research work,sol-gel technique was employed to prepare the strontium based spinel ferrite nanoparticles(SrFe_(2)O_(4))with different ratios of terbium(Tb).Different characterization techniques were used to in...In this research work,sol-gel technique was employed to prepare the strontium based spinel ferrite nanoparticles(SrFe_(2)O_(4))with different ratios of terbium(Tb).Different characterization techniques were used to investigate the structural,morphological,dielectric and magnetic properties of the prepared samples.X-ray diffraction(XRD)result suggests that face-centered cube spinel nanocrystalline structure is formed.Crystallite size of the SrFe_(2)O_(4)decreases with rising of Tb ratio.The morphology,shape and size of the SrFe_(2)O_(4)were examined by scanning electron microscopy(SEM)analysis and results reveal inhomogeneous distributions of the nanostructures with high agglomeration.The electrical resistivity of the SrFe_(2)O_(4)increases with rising of Tb ratio,which is confirmed from the cyclic voltammetry.It is observed that dielectric constant of all the samples decreases with the increasing frequency range.It is determined that the dielectric constants of the spinel ferrites are frequency dependent and decrease with increasing the frequency of applied electric field.The magnetic behavior of SrFe_(2)O_(4)with different ratios of Tb was studied and it is found that the saturation magnetization values of samples decrease with increase in the substitution of Tb^(3+)at octahedral sites for Fe^(3+).This decrease in the values of M_(s) is also attributed to spin at surface of nanoparticles.展开更多
Integrating titanium-based implants with the surrounding bone tissue remains challenging.This study aims to explore the impact of different anodization voltages(20−80 V)on the surface topography of two-phase(α/β)Ti ...Integrating titanium-based implants with the surrounding bone tissue remains challenging.This study aims to explore the impact of different anodization voltages(20−80 V)on the surface topography of two-phase(α/β)Ti alloys and to produce TiO_(2) films with enhanced bone formation abilities.Scanning electron microscopy coupled with energy dispersive spectroscopy(SEM−EDS)and atomic force microscopy(AFM)were applied to investigate the morphological,chemical,and surface topography of the prepared alloys and to confirm the growth of hydroxyapatite(HA)on their surfaces.Results disclosed that the surface roughness of TiO_(2) films formed on Ti−6Al−7Nb alloys was superior to that of Ti−6Al−4V alloys.Ti−6Al−7Nb alloy anodized at 80 V had the highest yields of HA after immersion in simulated body fluid with enhanced HA surface coverage.The developed HA layer had a mean thickness of(128.38±18.13)μm,suggesting its potential use as an orthopedic implantable material due to its promising bone integration and,hence,remarkable stability inside the human body.展开更多
In the present research work on TC21 titanium alloy(6.5 Al-3 Mo-1.9 Nb-2.2 Sn-2.2 Zr-1.5 Cr), the effects of cold deformation, solution treatment with different cooling rates and then aging on microstructure, hardness...In the present research work on TC21 titanium alloy(6.5 Al-3 Mo-1.9 Nb-2.2 Sn-2.2 Zr-1.5 Cr), the effects of cold deformation, solution treatment with different cooling rates and then aging on microstructure, hardness and wear property were investigated. A cold deformation at room temperature with 15% reduction in height was applied on annealed samples. The samples were solution-treated at 920 ℃ for 15 min followed by different cooling rates of water quenching(WQ), air cooling(AC) and furnace cooling(FC) to room temperature. Finally, the samples were aged at 590 ℃ for 4 h. Secondary α-platelets precipitated in residual β-phase in the case of solution-treated samples with AC condition and aged ones. The maximum hardness of HV 470 was obtained for WQ + aging condition due to the presence of high amount of residual β-matrix(69%), while the minimum hardness of HV 328 was reported for FC condition. Aging process after solution treatment can considerably enhance the wear property and this enhancement can reach up to about 122% by applying aging after WQ compared with the annealed samples.展开更多
Iron carbides are very promising metallurgical products and can be used for steelmaking process, where it plays as an alternative raw material with significant economic advantages. Also it has many other applications,...Iron carbides are very promising metallurgical products and can be used for steelmaking process, where it plays as an alternative raw material with significant economic advantages. Also it has many other applications, e.g. catalysts, magnets, sensors. The present review investigates the different properties and uses of the iron carbides. The commercial production and the different varieties for the iron carbides synthesis （gaseous carburization, mechanochemical synthesis, laser pyrolysis, plasma pyrolysis, chemical vapor deposition and ion implantation） were reviewed. Also the effect of different factors on the carburization process like gas composition, raw material, temperature, reaction time, catalyst presence and sulfur addition was indicated.展开更多
The operation of blast furnace using natural gas and oxygen enriched blast （composite blast technology） is considered in many countries to be standard operation for a modern blast furnace particularly in certain cou...The operation of blast furnace using natural gas and oxygen enriched blast （composite blast technology） is considered in many countries to be standard operation for a modern blast furnace particularly in certain countries with cheap and stable supply of natural gas. The theoretical flame temperature （TFT） of combustion and the degree of di-rect reduction of iron oxides （rd） are considered as the main controlling parameters of composite blast technology. The calculated values of these parameters are mainly dependent on the amount of air blast consumption. This amount of air blast is measured before entering into blast stoves, Actually, some of air blast is lost through valves of air stoves. Consequently, the real volume of air blast in the furnace is less than the recorded value by amounts of 5%-15% which is not considered in the estimation of rd and TFT. The purpose is to analyze the different methods for es-timation of air blast inside the blast furnaces and develop a theoretical model to calculate air blast eonsumption with high accuracy. Based on the calculation of air blast consumption, a complete roadmap is demonstrated to change the operation regime parameters of blast furnaces working on composite blast technology.展开更多
Low carbon steels are characterized by good weldability,formability and fracture toughness properties.However,the low strength levels of these steel grades limit their wide applications.On the other hand,increasing th...Low carbon steels are characterized by good weldability,formability and fracture toughness properties.However,the low strength levels of these steel grades limit their wide applications.On the other hand,increasing the strength by increasing the carbon content and alloying elements deteriorates the other properties.In this study,the microalloying technique was used to examine the possibility of attaining low carbon steels with good combination of strength,ductility and impact properties.A low carbon steel microalloyed with single addition of vanadium and another one microalloyed with combined addition of vanadium and titanium were used in this investigation and their properties were compared with non-microalloyed low carbon steel having the same base composition.Furthermore,other two nonmicroalloyed and V-microalloyed steels with higher carbon,silicon and manganese contents were also investigated to reveal the effect of base composition.Tensile,hardness,room and zero temperature Charpy V-notch impact tests were conducted to evaluate the variations in the mechanical properties of low carbon hot forged steel containing vanadium and combinations of vanadium and titanium.In addition,the microstructures of the different investigated steels were observed using both optical microscope and scanning electron microscope.Furthermore,the hardness of the ferrite phase was also determined using micro-hardness technique.The results showed improvement of the mechanical properties of the investigated steels by both single V-and combined V + Ti-microadditions.Tensile,hardness and impact tests results indicated that good combinations of strength,ductility and impact properties can be achieved by V-microalloying addition.Steel with combination of V and Ti microaddition has much higher hardness,yield strength,ultimate tensile strength and impact energy at both room and zero temperatures compared with non-microalloyed and single Vmicroalloyed steels.Higher C,Si and Mn contents result in increasing the strength accompanied with decreasing the impact energy.Scanning electron microscopy and optical microscopy studies revealed grain refinement effect of both Vand V+Ti-microadditions.The micro-hardness measurements of the ferrite phase confirmed the precipitation strengthening effect of microalloying elements.展开更多
This work aimed for pyrite separation from Abu Tartur black shale as a source of sulfur to be an added economic value of Abu Tartur area. The considered samples in the present work were collected from a core drilled i...This work aimed for pyrite separation from Abu Tartur black shale as a source of sulfur to be an added economic value of Abu Tartur area. The considered samples in the present work were collected from a core drilled in Abu Tartur plateau representing the pyrite-rich black shale of the U. Cretaceous age, Sample characterization was carried out using petrographic microscope, XRD, DTA/DTG, C/S and XRF techniques. Clay minerals, silt-sized quartz, calcite, and hematite were the main minerals associating pyr- ite （5.34g）. Liberation behavior of the sample was about 80% below 5 μm. Sample processing was achieved through one-day soaking followed by classification using I inch Mozley hydro-cyclone where about 35.5% by weight went to underflow and 64.5% went to overflow. The underflow product was subjected to an advanced gravity separation process using SB-40 Falcon Concentrator through a CCD statistical design prepared by Design-Expert 6.0 software proposed to opti- mize the separation process through a study for the effects of frequency （Hz） and water pressure （Psi） on both assay and recovery of the sulfur-rich heavy fraction. A heavy concentrate weighed 10.90% with inorganic sulfur content reached 11.37% （21.24% pyrite） with overall recovery （50.01%） was obtained after two cleaning at the optimum conditions.展开更多
P‐doped TiO2 (PTIO) thin‐films with different P contents were prepared using a sol‐gel method. The thin‐film samples were characterized using various techniques. The photocatalytic activity was evaluated by decomp...P‐doped TiO2 (PTIO) thin‐films with different P contents were prepared using a sol‐gel method. The thin‐film samples were characterized using various techniques. The photocatalytic activity was evaluated by decomposing butyl benzyl phthalate under visible‐light irradiation. The results showed that the transformation of anatase to the rutile phase was inhibited and grain growth of TiO2 was prevented by P doping. The results confirm that the doped P atoms existed in two chemical forms, and those incorporated in the TiO2 lattice may play a positive role in photocatalysis. The high photocatalytic activities of the PTIO thin‐films may be the result of extrinsic absorption through the creation of oxygen vacancies, rather than excitation of the intrinsic absorption band of bulk TiO2 . The PTIO can be recycled with little depression of the photocatalytic activity. After six cycles, the photocatalytic activity of the PTIO film was still higher than 98%.展开更多
The effect of Ca addition on modification of primary Mg_(2)Si,hardness and wear behavior in Mg-5 wt.%Si hypereutectic alloy has been investigated.The results showed clearly that without Ca addition,most of primary Mg_...The effect of Ca addition on modification of primary Mg_(2)Si,hardness and wear behavior in Mg-5 wt.%Si hypereutectic alloy has been investigated.The results showed clearly that without Ca addition,most of primary Mg_(2)Si appeared as coarse dendritic morphology with average size of about 215μm.With the addition of 0.1 wt.%Ca,the average size of primary Mg_(2)Si decreased to about 98μm,but their morphologies did not significantly changed.As the addition level of Ca increased to 0.3 wt.%,the average size of primary Mg_(2)Si decreased significantly to about 50μm and their morphologies changed to polyhedral shape.However,with further increasing Ca addition to 0.6 wt.%and 1 wt.%,some needle-like and blocky CaMgSi particles formed and the average size of primary Mg_(2)Si increased slightly,which could described as over-modification.The present work showed that the optimal modification effect could be obtained when the Ca content in the investigated alloy reached 0.3 wt.%.The modification mechanism may be referred mainly due to poisoning effect resulting from the segregation of Ca atoms at the growth front of the Mg_(2)Si and the adsorption effect of some Ca atoms in the Mg_(2)Si crystal growth plane.The 0.3 wt.%Ca-added alloy has the highest hardness value and the best wear resistance among all other alloys.An excessive Ca addition resulted in the formation of some needle-like and blocky CaMgSi particles,which was detrimental to hardness and wear behavior of the 0.6 wt.%and 1 wt.%Ca-added alloys.The wear mechanism of investigated alloys is a mild abrasive oxidative wear with little adhesion.展开更多
In order to study the production of porous silica compacts by the combustion of rice husk ash （RHA） for tundish lining, the experimental design technique was used to evaluate the effect of firing temperature, soakin...In order to study the production of porous silica compacts by the combustion of rice husk ash （RHA） for tundish lining, the experimental design technique was used to evaluate the effect of firing temperature, soaking time and compaction pressure on controlling both the porosity degree and compressive strength of rice husk ash compacts. The results revealed that while the porosity degree of the compacts decreased with the increase in the entire studied parameters, the compressive strength exhibited another trend especially at a lower soaking time. At a lower soaking time, the increase in firing temperature led to a slight decrease in compressive strength and then increasing thereafter. The porous silica compacts having 30% porosity and 〉 2.5 MPa compressive strength suitable for tundish lining could be obtained from the combustion of rice husk ash compacts.展开更多
Two different Ti alloys were cast in a graphite mould using vacuum induction skull melting furnace. The first alloy was Ti-6Al-4V and the second was Ti-6Al-4V 0.5Si. Silicon as a grain refiner was added into Ti-6Al-4V...Two different Ti alloys were cast in a graphite mould using vacuum induction skull melting furnace. The first alloy was Ti-6Al-4V and the second was Ti-6Al-4V 0.5Si. Silicon as a grain refiner was added into Ti-6Al-4V alloy, and the effects of Si-addition on the microstructure and properties of the as-cast and swaged alloys were investigated. Hot swaging at 900 °C was performed on the cast samples and then two different thermal treatments were applied. The first treatment was done by heating the swaged samples at 1050 °C to produce fine lamella structure, while the second treatment was carried out at 1050 °C and then decreased the temperature to 800 °C for getting coarse lamella structure. An addition of 0.5% Si to Ti-6Al-4V alloy decreased the grain size of the as-cast sample from 627 to 337 μm. There was an increase in ultimate tensile strength of about 25 MPa for the as-cast Ti-6Al-4V 0.5Si alloy compared to Ti-6Al-4V due to the refinement effect caused by Si addition. A maximum ultimate tensile strength of 1380 MPa and a minimum corrosion rate （1.35×10 6 mm/a in Hank’s solution and 5.78×10 4 mm/a in NaCl solution） were reported for the heat treated fine lamella structure of Ti-6Al-4V 0.5Si alloy. The wear rate was decreased to about 50% by adding 0.5% Si at low sliding speeds and to about 73% at high sliding speeds.展开更多
This work aims at the development of carbon steel AISI 1536 through the microalloying addition of boron. Three grades of this steel with different content of boron up to 0.0055% were melted in 100 kg induction furnace...This work aims at the development of carbon steel AISI 1536 through the microalloying addition of boron. Three grades of this steel with different content of boron up to 0.0055% were melted in 100 kg induction furnace. The pro- duced steels were hardened at 960°C for 30 min., followed by tempering at different temperatures and durations. All hardened steels have martensite phase as illustrated with microstructures and X-ray diffraction. Hardness of all tem- pered steel samples was measured to calculate the activation energies of carbon migration through martensite phase. The results indicated that the activation energies of carbon migration through martensite phase decreases with the in- crease of boron content due to its positive effect on the crystallinity of martensite phase. Also, the results showed that the addition of boron up to 0.0023% can improve the steel properties at the lowest temperature and tempered time.展开更多
Ultrafine grained steels with grain sizes below about 1 μm offer the prospect of high strength and high toughness with traditional steel compositions. These materials are currently the subject of extensive research e...Ultrafine grained steels with grain sizes below about 1 μm offer the prospect of high strength and high toughness with traditional steel compositions. These materials are currently the subject of extensive research efforts worldwide. Alloy design is one of the first considered issues, while designing new steel with targeted mechanical properties. However, the alloying content of steel does not fully determine the mechanical properties, but manufacturing procedure, hot rolling and cooling parameters, heat treatment parameters etc. are also of vital importance. For instance, same steel with different processing conditions can exhibit rather large variations in properties. To be precise, chemical composition with the processing parameters determines the microstructure, which in turn determines the properties of the steel. Steel is defined as an iron alloy containing C, Mn and Si that are generally used as alloying elements in steel. Micro-alloying elements such as Nb, Ti V, and B, are considered to be effective, causing strengthening as well as microstructural refinement in small quantities below 0.1 wt% (therefore these are called micro-alloy elements) and are quite generally used in ultrafine grain steel. Substitution alloying elements, such as Mo, Ni, Cr and Cu are alloyed to suppress phase transformation temperatures, i.e. for reaching certain level of strengthening, since the strength of steel structures strongly depends on the phase transformation temperature. Accordingly, the alloy design of ultrafine grains steels with different structures generally relies on: i) carbon levels, ii) sufficient alloying to obtain the desired transformation temperature and iii) micro-alloying technology in conjunction with Thermo Mechanical Controlled Processes (TMCP). Also, both advanced thermo-mechanical processes and severe plastic deformation strategies are used to produce ultrafine grained steels. Both approaches are suited to produce submicron grain structures with attractive mechanical properties. This overview describes the various techniques to fabricate ultrafine grained steels.展开更多
During high speed tool steel production up to 0.2 wt % silicon is added, primarily to react with oxygen e.g. silicon acts as a de-oxidizer. If more than 0.2 wt % silicon is added, it serves to improve the deep hardeni...During high speed tool steel production up to 0.2 wt % silicon is added, primarily to react with oxygen e.g. silicon acts as a de-oxidizer. If more than 0.2 wt % silicon is added, it serves to improve the deep hardening properties. An addition up to ~1 wt % silicon provides hardness and improves temper-stability but reduces the ductility. At high concentration, silicon causes embrittlement. Alloying with silicon raises the solubility of carbon in the matrix and hence the as-quenched hardness. It has virtually no influence on the carbide distribution, but it promotes the formation of M6C type carbides. The many essential alloy additions to iron (C, W, Mo, V, Cr, Si) make the high speed tool steel, HSS a complex multi-component system. Its complete experimental investigation would require enormous time and effort. Instead, the CALPHAD method has been successfully used for computation of phase equilibrium the multi-component HSS system. In the present work, the Thermo-Calc program has been applied to the system Fe-C-Cr-W-Mo-V-Si with the thermodynamic information contained in the solid-solution-database of the TCFE. In the present work, some temperature-concentration diagrams for silicon modified AISI M2 steel are presented by calculated quantities (melting and transformation temperatures, amount and compositions of phases). Calculated data are compared with standard AISI M2 high speed tool steel.展开更多
Synthesis of AlN by NH4Cl-assisted direct nitridation of secondary Al resources was studied. Aluminum alloy scrap contained Mg and Zn element was used. Milled Al scrap （-1 mm） was mixed with NH4Cl and heated at 1000...Synthesis of AlN by NH4Cl-assisted direct nitridation of secondary Al resources was studied. Aluminum alloy scrap contained Mg and Zn element was used. Milled Al scrap （-1 mm） was mixed with NH4Cl and heated at 1000℃ for 1 h in presence of 1 L/min N2 flow gas. The nitrided product was evaluated by X-ray diffraction semi-quantitative analysis and scanning electron microscopy （SEM）. Aluminium nitride of 90.5% concentration was obtained with a hexagonal crystalline form. AlN is mostly formed in nano-whisker morphology （50～150 nm） which is homogenously distributed.展开更多
Fe2O3, TiO2, CuO and ZnO powders were mixed according to the formula of （1-x）TiO2 xCuO-Fe2O3 or （1-x）TiO2 xZnO-Fe2O3 （x=0, 0.2 0.4, 0.6, 0.8, 1）, and well ball-milled with H2O for 3 h to ensure homogeneity of th...Fe2O3, TiO2, CuO and ZnO powders were mixed according to the formula of （1-x）TiO2 xCuO-Fe2O3 or （1-x）TiO2 xZnO-Fe2O3 （x=0, 0.2 0.4, 0.6, 0.8, 1）, and well ball-milled with H2O for 3 h to ensure homogeneity of the powdered solids, then fired at 1200℃ for 4 h. The fired samples were reduced at 500℃ with hydrogen gas. The reduced samples were subjected to recalcination at 500℃ in CO2 atmosphere. Both of fired, reduced and calcined samples were characterized by X-ray diffraction, vibrating sample magnetometry, reflected light microscopy and scanning electron microscopy. Different phases were formed after firing of Cu^＋2 or Zn^2＋ substituted Fe2TiO5. Magnetization （Bs） of the formed phases after firing are very low corresponding to diluted magnetic semiconductors （DMS） and increases with increasing the substituted cations （Cu^＋2 or Zn^2＋）. The reduction of the fired samples enhanced the Bs values whereas the reducibility increases with increasing the Cu^＋2 or Zn^2＋ content. Samples show different tendency toward CO2 decomposition which is very important for environmental minimization for CO2.展开更多
Biomass conversion to value-added chemicals has received tremendous attention for solving global warming issues and fossil fuel depletion.5-Hydroxymethylfurfural(HMF)is a key bio-based platform molecule to produce man...Biomass conversion to value-added chemicals has received tremendous attention for solving global warming issues and fossil fuel depletion.5-Hydroxymethylfurfural(HMF)is a key bio-based platform molecule to produce many useful organic chemicals by oxidation,hydrogenation,polymerization,and ring-opening reactions.Among all derivatives,the oxidation product 2,5-furandicarboxylic acid(FDCA)is a promising alternative to petroleum-based terephthalic acid for the synthesis of biodegradable plastics.This review analytically discusses the recent progress in the thermocatalytic,electrocatalytic,and photocatalytic oxidation of HMF into FDCA,including catalyst screening,synthesis processes,and reaction mechanism.Rapid fundamental advances may be possible in non-precious metal and metal-free catalysts that are highly efficient under the base-free conditions,and external field-assisted processes like electrochemical or photoelectrochemical cells.展开更多
This article reports the effect of ageing on the microstructure, martensitic transformation, magnetic properties, and mechanical properties of Ni51FelsGa27Ti4 shape memory alloy. There are five specimens of this alloy...This article reports the effect of ageing on the microstructure, martensitic transformation, magnetic properties, and mechanical properties of Ni51FelsGa27Ti4 shape memory alloy. There are five specimens of this alloy aged at 573 up to 973 K for 3 h per each. This range of ageing temperature greatly affects the microstructure of the alloy. As the ageing temperature increased from 573 up to 973 K, the microstructure of Ni51FelsGa27Ti4 alloy gradually changed from the entirely martensitic matrix at 573 K to the fully austenitic microstructure at 973 K. The volume fraction of precipi- tated Ni3Ti particles increased with the ageing temperature increasing from 573 to 773 K. Further increasing the ageing temperature to 973 K decreased the content of Ni3Ti in the microstructure. The martensitic transformation tempera- ture was decreased steadily by increasing the ageing temperature. The magnetization saturation, remnant magnetization, and coercivity increased with the ageing temperature increasing up to 773 K. A further increase in ageing temperature decreased these raagnetic properties. Moreover, the hardness values were gradually increased at first by increasing the ageing temperature to 773 K, and then dramatically decreased to the lowest value at 973 K.展开更多
The modification of A356 aluminum-silicon alloy using yttrium oxide (Y2O3) was studied. Addition levels of up to 2.5 wt.% Y2O3 were investigated. A premixed powder of Al-30wt.%Y2O3 was added to the melt at about 750℃...The modification of A356 aluminum-silicon alloy using yttrium oxide (Y2O3) was studied. Addition levels of up to 2.5 wt.% Y2O3 were investigated. A premixed powder of Al-30wt.%Y2O3 was added to the melt at about 750℃ using vortex method. Samples were then poured in sand mold. The results showed that evident modification was obtained using the Y2O3 addition. The optimum level was 1.5 wt.%, and was corresponding to a eutectic temperature depression from 568 to 557℃. The eutectic Si particles were refined in length from 44.8 to 8.3 μm, and modified in aspect ratio from 6.8 to 0.98. Higher additions of Y2O3 caused de-modification of the eutectic Si particles. The ductility of the modified specimens was enhanced by more than 20% compared to the unmodified ones. This was associated with a gradual transfer from cleavage to a more ductile mode of fracture.展开更多
基金support from the National Natural Science Foundation of China(22072170,U23A20125)the Zhejiang Provincial Key Research and Development Program(2021C03170).
文摘Photothermal energy conversion represents a cornerstone process in the renewable energy technologies domain,enabling the capture of solar irradiance and its subsequent transformation into thermal energy.This mechanism is paramount across many applications,facilitating the exploitation of solar energy for different purposes.The photothermal conversion efficiency and applications are fundamentally contingent upon the characteristics and performance of the materials employed.Consequently,deploying high-caliber materials is essential for optimizing energy capture and utilization.Within this context,photothermal nanomaterials have emerged as pivotal components in various applications,ranging from catalysis and sterilization to medical therapy,desalination,and electric power generation via the photothermal conversion effect.This review endeavors to encapsulate the current research landscape,delineating both the developmental trajectories and application horizons of photothermal conversion materials.It aims to furnish a detailed exposition of the mechanisms underlying photothermal conversion across various materials,shedding light on the principles guiding the design of photothermal nanomaterials.Furthermore,addressing the prevailing challenges and outlooks within the field elucidates potential avenues for future research and identifying priority areas.This review aspires to enrich the understanding of photothermal materials within the framework of energy conversion,offering novel insights and fostering a more profound comprehension of their role and potential in harnessing solar energy.
基金the Deanship of Scientific Research at King Khalid University for funding this work through Large Groups Project under(RGP.2/111/44)。
文摘In this research work,sol-gel technique was employed to prepare the strontium based spinel ferrite nanoparticles(SrFe_(2)O_(4))with different ratios of terbium(Tb).Different characterization techniques were used to investigate the structural,morphological,dielectric and magnetic properties of the prepared samples.X-ray diffraction(XRD)result suggests that face-centered cube spinel nanocrystalline structure is formed.Crystallite size of the SrFe_(2)O_(4)decreases with rising of Tb ratio.The morphology,shape and size of the SrFe_(2)O_(4)were examined by scanning electron microscopy(SEM)analysis and results reveal inhomogeneous distributions of the nanostructures with high agglomeration.The electrical resistivity of the SrFe_(2)O_(4)increases with rising of Tb ratio,which is confirmed from the cyclic voltammetry.It is observed that dielectric constant of all the samples decreases with the increasing frequency range.It is determined that the dielectric constants of the spinel ferrites are frequency dependent and decrease with increasing the frequency of applied electric field.The magnetic behavior of SrFe_(2)O_(4)with different ratios of Tb was studied and it is found that the saturation magnetization values of samples decrease with increase in the substitution of Tb^(3+)at octahedral sites for Fe^(3+).This decrease in the values of M_(s) is also attributed to spin at surface of nanoparticles.
基金financial support from the Science and Technology Development Fund of Egypt (No.5540)。
文摘Integrating titanium-based implants with the surrounding bone tissue remains challenging.This study aims to explore the impact of different anodization voltages(20−80 V)on the surface topography of two-phase(α/β)Ti alloys and to produce TiO_(2) films with enhanced bone formation abilities.Scanning electron microscopy coupled with energy dispersive spectroscopy(SEM−EDS)and atomic force microscopy(AFM)were applied to investigate the morphological,chemical,and surface topography of the prepared alloys and to confirm the growth of hydroxyapatite(HA)on their surfaces.Results disclosed that the surface roughness of TiO_(2) films formed on Ti−6Al−7Nb alloys was superior to that of Ti−6Al−4V alloys.Ti−6Al−7Nb alloy anodized at 80 V had the highest yields of HA after immersion in simulated body fluid with enhanced HA surface coverage.The developed HA layer had a mean thickness of(128.38±18.13)μm,suggesting its potential use as an orthopedic implantable material due to its promising bone integration and,hence,remarkable stability inside the human body.
文摘In the present research work on TC21 titanium alloy(6.5 Al-3 Mo-1.9 Nb-2.2 Sn-2.2 Zr-1.5 Cr), the effects of cold deformation, solution treatment with different cooling rates and then aging on microstructure, hardness and wear property were investigated. A cold deformation at room temperature with 15% reduction in height was applied on annealed samples. The samples were solution-treated at 920 ℃ for 15 min followed by different cooling rates of water quenching(WQ), air cooling(AC) and furnace cooling(FC) to room temperature. Finally, the samples were aged at 590 ℃ for 4 h. Secondary α-platelets precipitated in residual β-phase in the case of solution-treated samples with AC condition and aged ones. The maximum hardness of HV 470 was obtained for WQ + aging condition due to the presence of high amount of residual β-matrix(69%), while the minimum hardness of HV 328 was reported for FC condition. Aging process after solution treatment can considerably enhance the wear property and this enhancement can reach up to about 122% by applying aging after WQ compared with the annealed samples.
文摘Iron carbides are very promising metallurgical products and can be used for steelmaking process, where it plays as an alternative raw material with significant economic advantages. Also it has many other applications, e.g. catalysts, magnets, sensors. The present review investigates the different properties and uses of the iron carbides. The commercial production and the different varieties for the iron carbides synthesis （gaseous carburization, mechanochemical synthesis, laser pyrolysis, plasma pyrolysis, chemical vapor deposition and ion implantation） were reviewed. Also the effect of different factors on the carburization process like gas composition, raw material, temperature, reaction time, catalyst presence and sulfur addition was indicated.
文摘The operation of blast furnace using natural gas and oxygen enriched blast （composite blast technology） is considered in many countries to be standard operation for a modern blast furnace particularly in certain countries with cheap and stable supply of natural gas. The theoretical flame temperature （TFT） of combustion and the degree of di-rect reduction of iron oxides （rd） are considered as the main controlling parameters of composite blast technology. The calculated values of these parameters are mainly dependent on the amount of air blast consumption. This amount of air blast is measured before entering into blast stoves, Actually, some of air blast is lost through valves of air stoves. Consequently, the real volume of air blast in the furnace is less than the recorded value by amounts of 5%-15% which is not considered in the estimation of rd and TFT. The purpose is to analyze the different methods for es-timation of air blast inside the blast furnaces and develop a theoretical model to calculate air blast eonsumption with high accuracy. Based on the calculation of air blast consumption, a complete roadmap is demonstrated to change the operation regime parameters of blast furnaces working on composite blast technology.
文摘Low carbon steels are characterized by good weldability,formability and fracture toughness properties.However,the low strength levels of these steel grades limit their wide applications.On the other hand,increasing the strength by increasing the carbon content and alloying elements deteriorates the other properties.In this study,the microalloying technique was used to examine the possibility of attaining low carbon steels with good combination of strength,ductility and impact properties.A low carbon steel microalloyed with single addition of vanadium and another one microalloyed with combined addition of vanadium and titanium were used in this investigation and their properties were compared with non-microalloyed low carbon steel having the same base composition.Furthermore,other two nonmicroalloyed and V-microalloyed steels with higher carbon,silicon and manganese contents were also investigated to reveal the effect of base composition.Tensile,hardness,room and zero temperature Charpy V-notch impact tests were conducted to evaluate the variations in the mechanical properties of low carbon hot forged steel containing vanadium and combinations of vanadium and titanium.In addition,the microstructures of the different investigated steels were observed using both optical microscope and scanning electron microscope.Furthermore,the hardness of the ferrite phase was also determined using micro-hardness technique.The results showed improvement of the mechanical properties of the investigated steels by both single V-and combined V + Ti-microadditions.Tensile,hardness and impact tests results indicated that good combinations of strength,ductility and impact properties can be achieved by V-microalloying addition.Steel with combination of V and Ti microaddition has much higher hardness,yield strength,ultimate tensile strength and impact energy at both room and zero temperatures compared with non-microalloyed and single Vmicroalloyed steels.Higher C,Si and Mn contents result in increasing the strength accompanied with decreasing the impact energy.Scanning electron microscopy and optical microscopy studies revealed grain refinement effect of both Vand V+Ti-microadditions.The micro-hardness measurements of the ferrite phase confirmed the precipitation strengthening effect of microalloying elements.
基金the financial support of through the SNG program
文摘This work aimed for pyrite separation from Abu Tartur black shale as a source of sulfur to be an added economic value of Abu Tartur area. The considered samples in the present work were collected from a core drilled in Abu Tartur plateau representing the pyrite-rich black shale of the U. Cretaceous age, Sample characterization was carried out using petrographic microscope, XRD, DTA/DTG, C/S and XRF techniques. Clay minerals, silt-sized quartz, calcite, and hematite were the main minerals associating pyr- ite （5.34g）. Liberation behavior of the sample was about 80% below 5 μm. Sample processing was achieved through one-day soaking followed by classification using I inch Mozley hydro-cyclone where about 35.5% by weight went to underflow and 64.5% went to overflow. The underflow product was subjected to an advanced gravity separation process using SB-40 Falcon Concentrator through a CCD statistical design prepared by Design-Expert 6.0 software proposed to opti- mize the separation process through a study for the effects of frequency （Hz） and water pressure （Psi） on both assay and recovery of the sulfur-rich heavy fraction. A heavy concentrate weighed 10.90% with inorganic sulfur content reached 11.37% （21.24% pyrite） with overall recovery （50.01%） was obtained after two cleaning at the optimum conditions.
文摘P‐doped TiO2 (PTIO) thin‐films with different P contents were prepared using a sol‐gel method. The thin‐film samples were characterized using various techniques. The photocatalytic activity was evaluated by decomposing butyl benzyl phthalate under visible‐light irradiation. The results showed that the transformation of anatase to the rutile phase was inhibited and grain growth of TiO2 was prevented by P doping. The results confirm that the doped P atoms existed in two chemical forms, and those incorporated in the TiO2 lattice may play a positive role in photocatalysis. The high photocatalytic activities of the PTIO thin‐films may be the result of extrinsic absorption through the creation of oxygen vacancies, rather than excitation of the intrinsic absorption band of bulk TiO2 . The PTIO can be recycled with little depression of the photocatalytic activity. After six cycles, the photocatalytic activity of the PTIO film was still higher than 98%.
文摘The effect of Ca addition on modification of primary Mg_(2)Si,hardness and wear behavior in Mg-5 wt.%Si hypereutectic alloy has been investigated.The results showed clearly that without Ca addition,most of primary Mg_(2)Si appeared as coarse dendritic morphology with average size of about 215μm.With the addition of 0.1 wt.%Ca,the average size of primary Mg_(2)Si decreased to about 98μm,but their morphologies did not significantly changed.As the addition level of Ca increased to 0.3 wt.%,the average size of primary Mg_(2)Si decreased significantly to about 50μm and their morphologies changed to polyhedral shape.However,with further increasing Ca addition to 0.6 wt.%and 1 wt.%,some needle-like and blocky CaMgSi particles formed and the average size of primary Mg_(2)Si increased slightly,which could described as over-modification.The present work showed that the optimal modification effect could be obtained when the Ca content in the investigated alloy reached 0.3 wt.%.The modification mechanism may be referred mainly due to poisoning effect resulting from the segregation of Ca atoms at the growth front of the Mg_(2)Si and the adsorption effect of some Ca atoms in the Mg_(2)Si crystal growth plane.The 0.3 wt.%Ca-added alloy has the highest hardness value and the best wear resistance among all other alloys.An excessive Ca addition resulted in the formation of some needle-like and blocky CaMgSi particles,which was detrimental to hardness and wear behavior of the 0.6 wt.%and 1 wt.%Ca-added alloys.The wear mechanism of investigated alloys is a mild abrasive oxidative wear with little adhesion.
文摘In order to study the production of porous silica compacts by the combustion of rice husk ash （RHA） for tundish lining, the experimental design technique was used to evaluate the effect of firing temperature, soaking time and compaction pressure on controlling both the porosity degree and compressive strength of rice husk ash compacts. The results revealed that while the porosity degree of the compacts decreased with the increase in the entire studied parameters, the compressive strength exhibited another trend especially at a lower soaking time. At a lower soaking time, the increase in firing temperature led to a slight decrease in compressive strength and then increasing thereafter. The porous silica compacts having 30% porosity and 〉 2.5 MPa compressive strength suitable for tundish lining could be obtained from the combustion of rice husk ash compacts.
文摘Two different Ti alloys were cast in a graphite mould using vacuum induction skull melting furnace. The first alloy was Ti-6Al-4V and the second was Ti-6Al-4V 0.5Si. Silicon as a grain refiner was added into Ti-6Al-4V alloy, and the effects of Si-addition on the microstructure and properties of the as-cast and swaged alloys were investigated. Hot swaging at 900 °C was performed on the cast samples and then two different thermal treatments were applied. The first treatment was done by heating the swaged samples at 1050 °C to produce fine lamella structure, while the second treatment was carried out at 1050 °C and then decreased the temperature to 800 °C for getting coarse lamella structure. An addition of 0.5% Si to Ti-6Al-4V alloy decreased the grain size of the as-cast sample from 627 to 337 μm. There was an increase in ultimate tensile strength of about 25 MPa for the as-cast Ti-6Al-4V 0.5Si alloy compared to Ti-6Al-4V due to the refinement effect caused by Si addition. A maximum ultimate tensile strength of 1380 MPa and a minimum corrosion rate （1.35×10 6 mm/a in Hank’s solution and 5.78×10 4 mm/a in NaCl solution） were reported for the heat treated fine lamella structure of Ti-6Al-4V 0.5Si alloy. The wear rate was decreased to about 50% by adding 0.5% Si at low sliding speeds and to about 73% at high sliding speeds.
文摘This work aims at the development of carbon steel AISI 1536 through the microalloying addition of boron. Three grades of this steel with different content of boron up to 0.0055% were melted in 100 kg induction furnace. The pro- duced steels were hardened at 960°C for 30 min., followed by tempering at different temperatures and durations. All hardened steels have martensite phase as illustrated with microstructures and X-ray diffraction. Hardness of all tem- pered steel samples was measured to calculate the activation energies of carbon migration through martensite phase. The results indicated that the activation energies of carbon migration through martensite phase decreases with the in- crease of boron content due to its positive effect on the crystallinity of martensite phase. Also, the results showed that the addition of boron up to 0.0023% can improve the steel properties at the lowest temperature and tempered time.
文摘Ultrafine grained steels with grain sizes below about 1 μm offer the prospect of high strength and high toughness with traditional steel compositions. These materials are currently the subject of extensive research efforts worldwide. Alloy design is one of the first considered issues, while designing new steel with targeted mechanical properties. However, the alloying content of steel does not fully determine the mechanical properties, but manufacturing procedure, hot rolling and cooling parameters, heat treatment parameters etc. are also of vital importance. For instance, same steel with different processing conditions can exhibit rather large variations in properties. To be precise, chemical composition with the processing parameters determines the microstructure, which in turn determines the properties of the steel. Steel is defined as an iron alloy containing C, Mn and Si that are generally used as alloying elements in steel. Micro-alloying elements such as Nb, Ti V, and B, are considered to be effective, causing strengthening as well as microstructural refinement in small quantities below 0.1 wt% (therefore these are called micro-alloy elements) and are quite generally used in ultrafine grain steel. Substitution alloying elements, such as Mo, Ni, Cr and Cu are alloyed to suppress phase transformation temperatures, i.e. for reaching certain level of strengthening, since the strength of steel structures strongly depends on the phase transformation temperature. Accordingly, the alloy design of ultrafine grains steels with different structures generally relies on: i) carbon levels, ii) sufficient alloying to obtain the desired transformation temperature and iii) micro-alloying technology in conjunction with Thermo Mechanical Controlled Processes (TMCP). Also, both advanced thermo-mechanical processes and severe plastic deformation strategies are used to produce ultrafine grained steels. Both approaches are suited to produce submicron grain structures with attractive mechanical properties. This overview describes the various techniques to fabricate ultrafine grained steels.
文摘During high speed tool steel production up to 0.2 wt % silicon is added, primarily to react with oxygen e.g. silicon acts as a de-oxidizer. If more than 0.2 wt % silicon is added, it serves to improve the deep hardening properties. An addition up to ~1 wt % silicon provides hardness and improves temper-stability but reduces the ductility. At high concentration, silicon causes embrittlement. Alloying with silicon raises the solubility of carbon in the matrix and hence the as-quenched hardness. It has virtually no influence on the carbide distribution, but it promotes the formation of M6C type carbides. The many essential alloy additions to iron (C, W, Mo, V, Cr, Si) make the high speed tool steel, HSS a complex multi-component system. Its complete experimental investigation would require enormous time and effort. Instead, the CALPHAD method has been successfully used for computation of phase equilibrium the multi-component HSS system. In the present work, the Thermo-Calc program has been applied to the system Fe-C-Cr-W-Mo-V-Si with the thermodynamic information contained in the solid-solution-database of the TCFE. In the present work, some temperature-concentration diagrams for silicon modified AISI M2 steel are presented by calculated quantities (melting and transformation temperatures, amount and compositions of phases). Calculated data are compared with standard AISI M2 high speed tool steel.
文摘Synthesis of AlN by NH4Cl-assisted direct nitridation of secondary Al resources was studied. Aluminum alloy scrap contained Mg and Zn element was used. Milled Al scrap （-1 mm） was mixed with NH4Cl and heated at 1000℃ for 1 h in presence of 1 L/min N2 flow gas. The nitrided product was evaluated by X-ray diffraction semi-quantitative analysis and scanning electron microscopy （SEM）. Aluminium nitride of 90.5% concentration was obtained with a hexagonal crystalline form. AlN is mostly formed in nano-whisker morphology （50～150 nm） which is homogenously distributed.
文摘Fe2O3, TiO2, CuO and ZnO powders were mixed according to the formula of （1-x）TiO2 xCuO-Fe2O3 or （1-x）TiO2 xZnO-Fe2O3 （x=0, 0.2 0.4, 0.6, 0.8, 1）, and well ball-milled with H2O for 3 h to ensure homogeneity of the powdered solids, then fired at 1200℃ for 4 h. The fired samples were reduced at 500℃ with hydrogen gas. The reduced samples were subjected to recalcination at 500℃ in CO2 atmosphere. Both of fired, reduced and calcined samples were characterized by X-ray diffraction, vibrating sample magnetometry, reflected light microscopy and scanning electron microscopy. Different phases were formed after firing of Cu^＋2 or Zn^2＋ substituted Fe2TiO5. Magnetization （Bs） of the formed phases after firing are very low corresponding to diluted magnetic semiconductors （DMS） and increases with increasing the substituted cations （Cu^＋2 or Zn^2＋）. The reduction of the fired samples enhanced the Bs values whereas the reducibility increases with increasing the Cu^＋2 or Zn^2＋ content. Samples show different tendency toward CO2 decomposition which is very important for environmental minimization for CO2.
基金supported by Chinese Academy of Sciences(QYZDB-SSW-JSC037)Natural Science Foundation of Zhejiang Province(LY19B030003,LQ19B060002)+1 种基金Ningbo Science and Technology Bureau(2018B10056,2019B10096)Fujian Institute of Innovation(FJCXY18020202)。
文摘Biomass conversion to value-added chemicals has received tremendous attention for solving global warming issues and fossil fuel depletion.5-Hydroxymethylfurfural(HMF)is a key bio-based platform molecule to produce many useful organic chemicals by oxidation,hydrogenation,polymerization,and ring-opening reactions.Among all derivatives,the oxidation product 2,5-furandicarboxylic acid(FDCA)is a promising alternative to petroleum-based terephthalic acid for the synthesis of biodegradable plastics.This review analytically discusses the recent progress in the thermocatalytic,electrocatalytic,and photocatalytic oxidation of HMF into FDCA,including catalyst screening,synthesis processes,and reaction mechanism.Rapid fundamental advances may be possible in non-precious metal and metal-free catalysts that are highly efficient under the base-free conditions,and external field-assisted processes like electrochemical or photoelectrochemical cells.
文摘This article reports the effect of ageing on the microstructure, martensitic transformation, magnetic properties, and mechanical properties of Ni51FelsGa27Ti4 shape memory alloy. There are five specimens of this alloy aged at 573 up to 973 K for 3 h per each. This range of ageing temperature greatly affects the microstructure of the alloy. As the ageing temperature increased from 573 up to 973 K, the microstructure of Ni51FelsGa27Ti4 alloy gradually changed from the entirely martensitic matrix at 573 K to the fully austenitic microstructure at 973 K. The volume fraction of precipi- tated Ni3Ti particles increased with the ageing temperature increasing from 573 to 773 K. Further increasing the ageing temperature to 973 K decreased the content of Ni3Ti in the microstructure. The martensitic transformation tempera- ture was decreased steadily by increasing the ageing temperature. The magnetization saturation, remnant magnetization, and coercivity increased with the ageing temperature increasing up to 773 K. A further increase in ageing temperature decreased these raagnetic properties. Moreover, the hardness values were gradually increased at first by increasing the ageing temperature to 773 K, and then dramatically decreased to the lowest value at 973 K.
基金financial support from the Central Metallurgical Research and Development Institute (CMRDI), Ministry of Scientific Research, Egypt
文摘The modification of A356 aluminum-silicon alloy using yttrium oxide (Y2O3) was studied. Addition levels of up to 2.5 wt.% Y2O3 were investigated. A premixed powder of Al-30wt.%Y2O3 was added to the melt at about 750℃ using vortex method. Samples were then poured in sand mold. The results showed that evident modification was obtained using the Y2O3 addition. The optimum level was 1.5 wt.%, and was corresponding to a eutectic temperature depression from 568 to 557℃. The eutectic Si particles were refined in length from 44.8 to 8.3 μm, and modified in aspect ratio from 6.8 to 0.98. Higher additions of Y2O3 caused de-modification of the eutectic Si particles. The ductility of the modified specimens was enhanced by more than 20% compared to the unmodified ones. This was associated with a gradual transfer from cleavage to a more ductile mode of fracture.
