New complexes of europium,gadolinium and terbium trinitrates with N,N,N’,N’-tetraalkyl substituted phenanthroline diamides were synthesized.The europium complexes were found to be highly efficient in terms of lumine...New complexes of europium,gadolinium and terbium trinitrates with N,N,N’,N’-tetraalkyl substituted phenanthroline diamides were synthesized.The europium complexes were found to be highly efficient in terms of luminescence properties(max quantum yield=67%).The significant influence of the structure of the ligands on the photophysical characteristics of their complexes was demonstrated.Thus,the incorporation of various substituents(Cl,F,O,OH)into the phenanthroline core causes significant changes in the luminescent behavior of the obtained coordination compounds.We observed significant differences in the energy gap between the excited states S_(1)and T_(1),especially in the L2H.Eu(NO_(3))_(3)and L2FOH.Eu(NO_(3))_(3)complexes,which both demonstrated high overall quantum yields(66%and 67%,respectively).Study of the diffuse reflection spectra of terbium complexes suggested the phenomenon of charge transfer,potentially ligand-to-ligand(LLCT)or intra-ligand(ILCT),rather than ligand-to-metal charge transfer(LMCT).These results highlight the complicated relationship between ligand structure,energy transfer mechanisms and quantum yield in rare earth element complexes,shedding light on ways to optimize their luminescent properties.展开更多
Thrust-vectoring capability has become a critical feature for propulsion systems as space missions move from static to dynamic.Thrust-vectoring is a well-developed area of rocket engine science.For electric propulsion...Thrust-vectoring capability has become a critical feature for propulsion systems as space missions move from static to dynamic.Thrust-vectoring is a well-developed area of rocket engine science.For electric propulsion,however,it is an evolving field that has taken a new leap forward in recent years.A review and analysis of thrust-vectoring schemes for electric propulsion systems have been conducted.The scope of this review includes thrust-vectoring schemes that can be implemented for electrostatic,electromagnetic,and beam-driven thrusters.A classification of electric propulsion schemes that provide thrust-vectoring capability is developed.More attention is given to schemes implemented in laboratory prototypes and flight models.The final part is devoted to a discussion on the suitability of different electric propulsion systems with thrust-vectoring capability for modern space mission operations.The thrust-vectoring capability of electric propulsion is necessary for inner and outer space satellites,which are at a disadvantage with conventional unidirectional propulsion systems due to their limited maneuverability.展开更多
Understanding the complex relationship between vegetation change and both natural and anthropogenic factors is a subject of global importance.However,comprehensive explanations of vegetation cover trends across China...Understanding the complex relationship between vegetation change and both natural and anthropogenic factors is a subject of global importance.However,comprehensive explanations of vegetation cover trends across China’s different regions and the dynamic roles of their drivers remain limited.This study analyzed national and regional vegetation change trends from 2000 to 2020 and evaluated the evolving impacts of natural and anthropogenic factors.Results indicate that 44.14%of China’s land experienced significant increase(P<0.05)in vegetation coverage.The Northeast(A1),Southwest(A5),and South China(A8)regions showed extremely significant increases in vegetation cover,with over 65%of vegetation exhibiting extremely significant growth(P<0.01).In contrast,less than 25%of vegetation in Inner Mongolia(A2),Northwest(A3),and the Qinghai-Tibetan Plateau(A4)subregions demonstrated an extremely significant increasing trend(P<0.01).Precipitation(q=0.766)and land use type(q=0.636)were the most influential natural and anthropogenic factors,respectively,with their interaction(q=0.838)dominating national vegetation patterns.On the west side of the Hu Line,vegetation dynamics were mainly limited by arid and semi-arid climates,with precipitation as the dominant factor,though land use measures have contributed to some vegetation improvement.Between 2000 and 2020,the influence of precipitation on vegetation cover increased in regions A3 and A4,with q-values rising by 26.73%and 101.13%,respectively.Additionally,soil type exerted a significant effect(P<0.001)on vegetation cover across all regions,being most pronounced in A2(q=0.692).On the east side of the Hu Line,vegetation growth benefited generally from warm and humid conditions,while local decline in urbanized areas was largely attributable to land use change and economic expansion.Concurrently anthropogenic factors such as land use and population density increasingly influenced vegetation dynamics in eastern urban areas of the Hu Line.Population density and GDP were the most influential factors affecting vegetation cover in region A8,with q-values of 0.443 and 0.380,respectively(P<0.001).Future efforts should maintain the benefits of large-scale ecological projects and harmonize the relationship between urban vegetation and anthropogenic influences.展开更多
During multi-pass conventional spinning, roller paths combined with the forward and the backward pass are usually used to improve the material formability. In order to understand the backward spinning process properly...During multi-pass conventional spinning, roller paths combined with the forward and the backward pass are usually used to improve the material formability. In order to understand the backward spinning process properly, the backward roller paths of hemispherical parts with aluminum alloy 2024-O are analyzed. Finite element model with parameterized conventional spinning roller paths, which are based on quadratic Bezier curves, is developed to explore the evolution of the stress, strain and thinning during the backward processes. Analysis of the simulation results reveals stress and strain features of backward pass spinning. According to the findings, the application of the backward pass can obviously improve the uniformity of wall thickness. Furthermore, references of the parameters in future backward path design are provided.展开更多
The features of carrier-based aircraft’s navigation systems during the approach and landing phases are investigated.A new adaptive Kalman filter with unknown state noise statistics is proposed to improve the accuracy...The features of carrier-based aircraft’s navigation systems during the approach and landing phases are investigated.A new adaptive Kalman filter with unknown state noise statistics is proposed to improve the accuracy of the INS/GNSS integrated navigation system.The adaptive filtering algorithm aims to estimate and adapt the unknown state noise covariance Q in high dynamic conditions,when the measurement noise covariance R is assumed to be known empirically in advance.The new adaptive Kalman filter based on the innovation sequence and pseudo-measurement vector approach makes it more effective to estimate and adapt Q.The simulation results and semi-physical experiments show that the application of the proposed adaptive Kalman filter can guarantee a higher estimation accuracy of the state variables.展开更多
Ti/Cu/Ti laminated composites were fabricated by corrugated rolling(CR) and flat rolling(FR) method.Microstructure and mechanical properties of CR and FR laminated composites were investigated by scanning electron mic...Ti/Cu/Ti laminated composites were fabricated by corrugated rolling(CR) and flat rolling(FR) method.Microstructure and mechanical properties of CR and FR laminated composites were investigated by scanning electron microscopy, numerical simulation methods, peel and tensile examinations. The effect of CR and FR was comparatively analyzed. The results showed that the CR and FR laminated composites exhibited different effective plastic strain distributions of the Ti layer and Cu layer at the interface. The recrystallization texture, prismatic texture and pyramidal texture were developed in the Ti layer by CR, while the R-Goss texture and shear texture were developed in the Cu layer by CR. The typical deformation texture components were developed in the Ti layer and Cu layer of FR laminated composites. The CR laminated composites had higher bond strength, tensile strength and ductility.展开更多
Terahertz(THz)technology offers novel opportunities in biology and medicine,thanks to the unique features of THzwave interactions with tissues and cells.Among them,we particularly notice strong sensitivity of THz wave...Terahertz(THz)technology offers novel opportunities in biology and medicine,thanks to the unique features of THzwave interactions with tissues and cells.Among them,we particularly notice strong sensitivity of THz waves to the tissue water,as a medium for biochemical reactions and a main endogenous marker for THz spectroscopy and imaging.Tissues of the brain have an exceptionally high content of water.This factor,along with the features of the structural organization and biochemistry of neuronal and glial tissues,makes the brain an exciting subject to study in the THz range.In this paper,progress and prospects of THz technology in neurodiagnostics are overviewed,including diagnosis of neurodegenerative disease,myelin deficit,tumors of the central nervous system(with an emphasis on brain gliomas),and traumatic brain injuries.Fundamental and applied challenges in study of the THz-wave–brain tissue interactions and development of the THz biomedical tools and systems for neurodiagnostics are discussed.展开更多
In the case of valuable cold-rolled Cu/Al clad plates,billet surface treatment before rolling is a significant process that can affect the bonding efficiency and quality.While the current studies primarily focus on th...In the case of valuable cold-rolled Cu/Al clad plates,billet surface treatment before rolling is a significant process that can affect the bonding efficiency and quality.While the current studies primarily focus on the influence of rolling parameters,insufficient attention has been paid to surface treatment.In this study,the effects of mechanical surface treatment on the bonding mechanism and bonding properties of cold-rolled Cu/Al clad plates were investigated.The results showed that different mechanical surface treatments have significant effects on the surface morphology,roughness,and residual stress.In addition,the effect of surface mechanical treatment on bonding quality was also observed to be critical.When the grinding direction was consistent with the rolling direction(RD),the bonding quality of the Cu/Al clad plates was significantly improved.After surface treatment along the RD for 20 s,the Cu/Al clad plates showed the highest shear strength(78 MPa),approximately four times as high as that of the unpolished samples.Simultaneously,the peel strength of this process was also significantly higher than that achieved via the other processes.Finally,on the basis of the surface morphology,roughness,and residual stress,the effect of surface treatment on the bonding mechanism and bonding properties of Cu/Al clad plates was analyzed.This study proposes a deeper understanding of the bonding behavior and bonding mechanism for cold rolled clad plates processed via mechanical surface treatment.展开更多
The problem of in vrivo photoluminescence diagnostics of the tissues acessible by endoscopes is discussed.The spectral imaging module attachable to conventional rigid and flexible medical endoscopes is developed and d...The problem of in vrivo photoluminescence diagnostics of the tissues acessible by endoscopes is discussed.The spectral imaging module attachable to conventional rigid and flexible medical endoscopes is developed and described.It is based on a double acousto-optical tunable filter(AOTF)and a specialized optical coupling system.The module provides wide field of view(FOV),absence of image distortions,random spectral access,fast spectral image acquisition at any wavelength in the visible range and accurate measurement of reflectance spectrum in each pixel of the image.Images of typical biomedical samples are presented and discussed.Their spectra are compared to the reference data.展开更多
After conducting a critical survey of the different categories of existing heat exchangers,the results of several experiments about the behaviour of a two-phase current in an open channel are reported.The results conf...After conducting a critical survey of the different categories of existing heat exchangers,the results of several experiments about the behaviour of a two-phase current in an open channel are reported.The results confirm the complexity of the problems induced in heat exchangers by flow maldistribution,especially when two-phase flows are considered in multi-channel systems.It is shown that severe misalignment of heat exchangers can lead to a loss of economic performance of more than 25%.Improper distribution of fluid flow causes longer fluid coils to form,and the liquid cochlea can eventually occupy a large space,thereby reducing heat transfer and disrupting the considered biphasic system.The use of a small diameter distribution pipe with properly spaced outlet holes seems to be a promising approach to fix many of these issues.It is found that the current distribution in the channels,in addition to the header pressure distribution,also depends on factors such as the geometry and the initial flow regime in the header.展开更多
To increase accuracy of navigation parameters,a perspective measuring complex with intellectual components is developed.Conception of synthesis optimal structure of the measuring complex is realized basing on a select...To increase accuracy of navigation parameters,a perspective measuring complex with intellectual components is developed.Conception of synthesis optimal structure of the measuring complex is realized basing on a selective method using principles of the functional systems.Selection of measured information is finished by original numeric criterion of observation level of state vector components.Prediction is realized by algorithm of self-organization that makes synthesis of the optimal complication.Therefore mechanism of self-regulation is realized and accuracy of the selective navigation complex is increased.展开更多
In this study, recurrent networks to downscale meteorological fields of the ERA-40 re-analysis dataset with focus on the meso-scale water balance were investigated. Therefore two types of recurrent neural networks wer...In this study, recurrent networks to downscale meteorological fields of the ERA-40 re-analysis dataset with focus on the meso-scale water balance were investigated. Therefore two types of recurrent neural networks were used. The first approach is a coupling between a recurrent neural network and a distributed watershed model and the second a nonlinear autoregressive with exogenous inputs (NARX) network, which directly predicted the component of the water balance. The approaches were deployed for a meso-scale catchment area in the Free State of Saxony, Germany. The results show that the coupled approach did not perform as well as the NARX network. But the meteorological output of the coupled approach already reaches an adequate quality. However the coupled model generates as input for the watershed model insufficient daily precipitation sums and not enough wet days were predicted. Hence the long-term annual cycle of the water balance could not be preserved with acceptable quality in contrary to the NARX approach. The residual storage change term indicates physical restrictions of the plausibility of the neural networks, whereas the physically based correlations among?the components of the water balance were preserved more accurately by the coupled approach.展开更多
Experimental beneficiation processes of quartz concentrate in arc plasma torches of two different types and electric powers were studied. An emission scanning electron microscope and a universal laser analyzer were us...Experimental beneficiation processes of quartz concentrate in arc plasma torches of two different types and electric powers were studied. An emission scanning electron microscope and a universal laser analyzer were used to investigate the structures as well as the size distributions of grains and microparticles. Inductively coupled plasma–mass spectrometry was used to determine the chemical compositions of nonstructural solid-phase mineral impurities in quartz concentrate. Results related to the modified grains' structure and size distribution, the compositions of impurities, and the gas–liquid inclusions in the quartz concentrate were investigated. The total impurities concentrations in the processed grains were found to satisfy the IOTA-STD standard(industry standard for grading high quality fused quartz products). The optimal condition(i.e., the optimal specific plasma enthalpy) for the production of high-purity quartz in arc plasma torches was found to depend on the geological-genetic type and the structural and textural features(i.e., chemical composition and gas–liquid inclusions) of the quartz concentrate.展开更多
Testing rocket and space technology objects in ground conditions for resistance to the impact of meteoroids and fragments of space debris can be carried out using shaped charges. To substantiate the design parameters ...Testing rocket and space technology objects in ground conditions for resistance to the impact of meteoroids and fragments of space debris can be carried out using shaped charges. To substantiate the design parameters of shaped charges that ensure the formation of aluminum particles in a wide velocity range(from 2.5 to 16 km/s), numerical modeling of the formation process was carried out within the framework of a two-dimensional axisymmetric problem of continuum mechanics using three different computing codes to increase the reliability of the results. The calculations consider shaped charges with a diameter of 20-100 mm with aluminum liners of various shapes. It is shown that the formation of particles with velocities close to the lower limit of the considered range is ensured by gently sloping segmental liners of degressive thickness. To form higher-velocity particles with velocities over 5 km/s, it is proposed to use combined liners, the jet-forming part of which has the shape of a hemisphere of constant thickness or the shape of a semi-ellipsoid or semi-superellipsoid of rotation of degressive thickness.展开更多
Artificial neural network(ANN) technology was applied to predict weld hot crack susceptibility of the T-type welded joints of aluminum alloys. A primary prediction model was established by training and testing models ...Artificial neural network(ANN) technology was applied to predict weld hot crack susceptibility of the T-type welded joints of aluminum alloys. A primary prediction model was established by training and testing models with different structures and committee models with different numbers of sub models. The models were improved by decreasing the input variables and data-covering space. Then welding hot crack prediction model committee for T-type joints of aluminum plates was developed. Its input parameters include base metal composition, filler metal composition and welding technique, the output parameter is the total length of the weld hot crack. The performance analysis shows that the predicted trend agrees well with the previous research work.展开更多
Studying the vibrational behavior of feed drive systems is important for enhancing the structural performance of computer numerical control(CNC)machines.The preload on the screw and nut position have a great influence...Studying the vibrational behavior of feed drive systems is important for enhancing the structural performance of computer numerical control(CNC)machines.The preload on the screw and nut position have a great influence on the vibration characteristics of the feed drive as two very important operational conditions.Rotational acceleration of the screw also affects the performance of the CNC feed drive when machining small parts.This paper investigates the influence of preload and nut position on the vibration characteristics of the feed drive system of a CNC metal cutting machine in order to be able to eliminate an observed resonance occurred at high rotational speeds of the screw,corresponding to high feed rates.Additionally,rational structural parameters of the feed drive system are selected in order to increase the rotational acceleration for improving the performance of the CNC machine.Experiments and analyses showed that by selecting specific parameters of feed drive system and simultaneously applying a certain value of preload,a 97%increase in rotational acceleration and 30%time reduction considering the vibration resistance at high rotational speeds can be achieved.展开更多
We estimate the thermal properties of unsmooth Si nanowires,considering key factors such as size(diameter),surface texture(roughness)and quantum size effects(phonon states)at different temperatures.For nanowires with ...We estimate the thermal properties of unsmooth Si nanowires,considering key factors such as size(diameter),surface texture(roughness)and quantum size effects(phonon states)at different temperatures.For nanowires with a diameter of less than 20 nm,we highlight the importance of quantum size effects in heat capacity calculations,using dispersion relations derived from the modified frequency equation for the elasticity of a rod.The thermal conductivities of nanowires with diameters of 37,56,and 115nm are predicted using the Fuchs–Sondheimer model and Soffer’s specular parameter.Notably,the roughness parameters are chosen to reflect the technological characteristics of the real surfaces.Our findings reveal that surface texture plays a significant role in thermal conductivity,particularly in the realm of ballistic heat transfer within nanowires.This study provides practical recommendations for developing new thermal management materials.展开更多
Anomalous ion heat transport is analyzed in the T-10 tokamak plasma heated with electron cyclotron resonance heating(ECRH) in second-harmonic extra-ordinary mode. Predictive modeling with empirical scaling for Ohmical...Anomalous ion heat transport is analyzed in the T-10 tokamak plasma heated with electron cyclotron resonance heating(ECRH) in second-harmonic extra-ordinary mode. Predictive modeling with empirical scaling for Ohmical heat conductivity shows that in ECRH plasmas the calculated ion temperature could be overestimated, so an increase of anomalous ion heat transport is required. To study this effect two scans are presented: over the EC resonance position and over the ECRH power. The EC resonance position varies from the high-field side to the low-field side by variation of the toroidal magnetic field. The scan over the heating power is presented with on-axis and mixed ECRH regimes. Discharges with high anomalous ion heat transport are obtained in all considered regimes. In these discharges the power balance ion heat conductivity exceeds the neoclassical level by up to 10 times. The high ion heat transport regimes are distinguished by three parameters: the ratio Te/Ti, the normalized electron density gradient R/■, and the ion–ion collisionality νii~*. The combination of high Te/Ti, high νii~*, and R/■=6-10 results in values of normalized anomalous ion heat fluxes up to 10 times higher than in the low transport scenario.展开更多
基金support from M.V.Lomonosov Moscow State University Program of Development。
文摘New complexes of europium,gadolinium and terbium trinitrates with N,N,N’,N’-tetraalkyl substituted phenanthroline diamides were synthesized.The europium complexes were found to be highly efficient in terms of luminescence properties(max quantum yield=67%).The significant influence of the structure of the ligands on the photophysical characteristics of their complexes was demonstrated.Thus,the incorporation of various substituents(Cl,F,O,OH)into the phenanthroline core causes significant changes in the luminescent behavior of the obtained coordination compounds.We observed significant differences in the energy gap between the excited states S_(1)and T_(1),especially in the L2H.Eu(NO_(3))_(3)and L2FOH.Eu(NO_(3))_(3)complexes,which both demonstrated high overall quantum yields(66%and 67%,respectively).Study of the diffuse reflection spectra of terbium complexes suggested the phenomenon of charge transfer,potentially ligand-to-ligand(LLCT)or intra-ligand(ILCT),rather than ligand-to-metal charge transfer(LMCT).These results highlight the complicated relationship between ligand structure,energy transfer mechanisms and quantum yield in rare earth element complexes,shedding light on ways to optimize their luminescent properties.
基金performed at large-scale research facility"Beam-M"of Bauman Moscow State Technical University following the government task by the Ministry of Science and Higher Education of the Russian Federation(No.FSFN-2024-0007).
文摘Thrust-vectoring capability has become a critical feature for propulsion systems as space missions move from static to dynamic.Thrust-vectoring is a well-developed area of rocket engine science.For electric propulsion,however,it is an evolving field that has taken a new leap forward in recent years.A review and analysis of thrust-vectoring schemes for electric propulsion systems have been conducted.The scope of this review includes thrust-vectoring schemes that can be implemented for electrostatic,electromagnetic,and beam-driven thrusters.A classification of electric propulsion schemes that provide thrust-vectoring capability is developed.More attention is given to schemes implemented in laboratory prototypes and flight models.The final part is devoted to a discussion on the suitability of different electric propulsion systems with thrust-vectoring capability for modern space mission operations.The thrust-vectoring capability of electric propulsion is necessary for inner and outer space satellites,which are at a disadvantage with conventional unidirectional propulsion systems due to their limited maneuverability.
基金Under the auspices of the National Natural Science Foundation of China(No.32371863)Fundamental Research Funds for the Central Universities(No.2572025AW39)。
文摘Understanding the complex relationship between vegetation change and both natural and anthropogenic factors is a subject of global importance.However,comprehensive explanations of vegetation cover trends across China’s different regions and the dynamic roles of their drivers remain limited.This study analyzed national and regional vegetation change trends from 2000 to 2020 and evaluated the evolving impacts of natural and anthropogenic factors.Results indicate that 44.14%of China’s land experienced significant increase(P<0.05)in vegetation coverage.The Northeast(A1),Southwest(A5),and South China(A8)regions showed extremely significant increases in vegetation cover,with over 65%of vegetation exhibiting extremely significant growth(P<0.01).In contrast,less than 25%of vegetation in Inner Mongolia(A2),Northwest(A3),and the Qinghai-Tibetan Plateau(A4)subregions demonstrated an extremely significant increasing trend(P<0.01).Precipitation(q=0.766)and land use type(q=0.636)were the most influential natural and anthropogenic factors,respectively,with their interaction(q=0.838)dominating national vegetation patterns.On the west side of the Hu Line,vegetation dynamics were mainly limited by arid and semi-arid climates,with precipitation as the dominant factor,though land use measures have contributed to some vegetation improvement.Between 2000 and 2020,the influence of precipitation on vegetation cover increased in regions A3 and A4,with q-values rising by 26.73%and 101.13%,respectively.Additionally,soil type exerted a significant effect(P<0.001)on vegetation cover across all regions,being most pronounced in A2(q=0.692).On the east side of the Hu Line,vegetation growth benefited generally from warm and humid conditions,while local decline in urbanized areas was largely attributable to land use change and economic expansion.Concurrently anthropogenic factors such as land use and population density increasingly influenced vegetation dynamics in eastern urban areas of the Hu Line.Population density and GDP were the most influential factors affecting vegetation cover in region A8,with q-values of 0.443 and 0.380,respectively(P<0.001).Future efforts should maintain the benefits of large-scale ecological projects and harmonize the relationship between urban vegetation and anthropogenic influences.
基金Project(2014CB046601)supported by the National Basic Research Program of ChinaProject(51675333)supported by the National Natural Science Foundation of China
文摘During multi-pass conventional spinning, roller paths combined with the forward and the backward pass are usually used to improve the material formability. In order to understand the backward spinning process properly, the backward roller paths of hemispherical parts with aluminum alloy 2024-O are analyzed. Finite element model with parameterized conventional spinning roller paths, which are based on quadratic Bezier curves, is developed to explore the evolution of the stress, strain and thinning during the backward processes. Analysis of the simulation results reveals stress and strain features of backward pass spinning. According to the findings, the application of the backward pass can obviously improve the uniformity of wall thickness. Furthermore, references of the parameters in future backward path design are provided.
基金supported by the project“Component’s digital transformation methods'fundamental research for micro-and nanosystems”(No.#0705-2020-0041).
文摘The features of carrier-based aircraft’s navigation systems during the approach and landing phases are investigated.A new adaptive Kalman filter with unknown state noise statistics is proposed to improve the accuracy of the INS/GNSS integrated navigation system.The adaptive filtering algorithm aims to estimate and adapt the unknown state noise covariance Q in high dynamic conditions,when the measurement noise covariance R is assumed to be known empirically in advance.The new adaptive Kalman filter based on the innovation sequence and pseudo-measurement vector approach makes it more effective to estimate and adapt Q.The simulation results and semi-physical experiments show that the application of the proposed adaptive Kalman filter can guarantee a higher estimation accuracy of the state variables.
基金financially supported by the National Key R&D Program of China (No.2018YFA0707300)the Natural Science Foundation of Shanxi Province,China (No.201801D221131)+2 种基金the National Natural Science Foundation of China (Nos.51905372,51904206,51805359,52075359)Shanxi Province Science and Technology Major Project,China (No.20181102011)China Postdoctoral Science Foundation (No.2020M670705)。
文摘Ti/Cu/Ti laminated composites were fabricated by corrugated rolling(CR) and flat rolling(FR) method.Microstructure and mechanical properties of CR and FR laminated composites were investigated by scanning electron microscopy, numerical simulation methods, peel and tensile examinations. The effect of CR and FR was comparatively analyzed. The results showed that the CR and FR laminated composites exhibited different effective plastic strain distributions of the Ti layer and Cu layer at the interface. The recrystallization texture, prismatic texture and pyramidal texture were developed in the Ti layer by CR, while the R-Goss texture and shear texture were developed in the Cu layer by CR. The typical deformation texture components were developed in the Ti layer and Cu layer of FR laminated composites. The CR laminated composites had higher bond strength, tensile strength and ductility.
基金The work was supported by the Russian Science Foundation,Project#22-22-00596.
文摘Terahertz(THz)technology offers novel opportunities in biology and medicine,thanks to the unique features of THzwave interactions with tissues and cells.Among them,we particularly notice strong sensitivity of THz waves to the tissue water,as a medium for biochemical reactions and a main endogenous marker for THz spectroscopy and imaging.Tissues of the brain have an exceptionally high content of water.This factor,along with the features of the structural organization and biochemistry of neuronal and glial tissues,makes the brain an exciting subject to study in the THz range.In this paper,progress and prospects of THz technology in neurodiagnostics are overviewed,including diagnosis of neurodegenerative disease,myelin deficit,tumors of the central nervous system(with an emphasis on brain gliomas),and traumatic brain injuries.Fundamental and applied challenges in study of the THz-wave–brain tissue interactions and development of the THz biomedical tools and systems for neurodiagnostics are discussed.
基金Supported by Major Program of National Natural Science Foundation of China(Grant No.U1710254)National Natural Science Foundation of China(Grant Nos.51904205,51804215)+3 种基金Shanxi Provincial Science and Technology Major Projects of China(Grant No.20181101008)Shanxi Provincial Natural Science Foundation of China(Grant No.201801D221221)China Postdoctoral Science Foundation(Grant No.2018M641681)Taiyuan Municipal Science and Technology Major Projects of China(Grant No.170203).
文摘In the case of valuable cold-rolled Cu/Al clad plates,billet surface treatment before rolling is a significant process that can affect the bonding efficiency and quality.While the current studies primarily focus on the influence of rolling parameters,insufficient attention has been paid to surface treatment.In this study,the effects of mechanical surface treatment on the bonding mechanism and bonding properties of cold-rolled Cu/Al clad plates were investigated.The results showed that different mechanical surface treatments have significant effects on the surface morphology,roughness,and residual stress.In addition,the effect of surface mechanical treatment on bonding quality was also observed to be critical.When the grinding direction was consistent with the rolling direction(RD),the bonding quality of the Cu/Al clad plates was significantly improved.After surface treatment along the RD for 20 s,the Cu/Al clad plates showed the highest shear strength(78 MPa),approximately four times as high as that of the unpolished samples.Simultaneously,the peel strength of this process was also significantly higher than that achieved via the other processes.Finally,on the basis of the surface morphology,roughness,and residual stress,the effect of surface treatment on the bonding mechanism and bonding properties of Cu/Al clad plates was analyzed.This study proposes a deeper understanding of the bonding behavior and bonding mechanism for cold rolled clad plates processed via mechanical surface treatment.
基金supported by Grant Nos.13-02-12210 and 14-00-10420 of Russian Foundation of Basic Research.
文摘The problem of in vrivo photoluminescence diagnostics of the tissues acessible by endoscopes is discussed.The spectral imaging module attachable to conventional rigid and flexible medical endoscopes is developed and described.It is based on a double acousto-optical tunable filter(AOTF)and a specialized optical coupling system.The module provides wide field of view(FOV),absence of image distortions,random spectral access,fast spectral image acquisition at any wavelength in the visible range and accurate measurement of reflectance spectrum in each pixel of the image.Images of typical biomedical samples are presented and discussed.Their spectra are compared to the reference data.
文摘After conducting a critical survey of the different categories of existing heat exchangers,the results of several experiments about the behaviour of a two-phase current in an open channel are reported.The results confirm the complexity of the problems induced in heat exchangers by flow maldistribution,especially when two-phase flows are considered in multi-channel systems.It is shown that severe misalignment of heat exchangers can lead to a loss of economic performance of more than 25%.Improper distribution of fluid flow causes longer fluid coils to form,and the liquid cochlea can eventually occupy a large space,thereby reducing heat transfer and disrupting the considered biphasic system.The use of a small diameter distribution pipe with properly spaced outlet holes seems to be a promising approach to fix many of these issues.It is found that the current distribution in the channels,in addition to the header pressure distribution,also depends on factors such as the geometry and the initial flow regime in the header.
文摘To increase accuracy of navigation parameters,a perspective measuring complex with intellectual components is developed.Conception of synthesis optimal structure of the measuring complex is realized basing on a selective method using principles of the functional systems.Selection of measured information is finished by original numeric criterion of observation level of state vector components.Prediction is realized by algorithm of self-organization that makes synthesis of the optimal complication.Therefore mechanism of self-regulation is realized and accuracy of the selective navigation complex is increased.
基金supported by the Erasmus Mundus Action 2 Programme of the European Union and the German Weather Service(DWD)and the Czech Hydrological-Meteorological Service(CHMI).
文摘In this study, recurrent networks to downscale meteorological fields of the ERA-40 re-analysis dataset with focus on the meso-scale water balance were investigated. Therefore two types of recurrent neural networks were used. The first approach is a coupling between a recurrent neural network and a distributed watershed model and the second a nonlinear autoregressive with exogenous inputs (NARX) network, which directly predicted the component of the water balance. The approaches were deployed for a meso-scale catchment area in the Free State of Saxony, Germany. The results show that the coupled approach did not perform as well as the NARX network. But the meteorological output of the coupled approach already reaches an adequate quality. However the coupled model generates as input for the watershed model insufficient daily precipitation sums and not enough wet days were predicted. Hence the long-term annual cycle of the water balance could not be preserved with acceptable quality in contrary to the NARX approach. The residual storage change term indicates physical restrictions of the plausibility of the neural networks, whereas the physically based correlations among?the components of the water balance were preserved more accurately by the coupled approach.
文摘Experimental beneficiation processes of quartz concentrate in arc plasma torches of two different types and electric powers were studied. An emission scanning electron microscope and a universal laser analyzer were used to investigate the structures as well as the size distributions of grains and microparticles. Inductively coupled plasma–mass spectrometry was used to determine the chemical compositions of nonstructural solid-phase mineral impurities in quartz concentrate. Results related to the modified grains' structure and size distribution, the compositions of impurities, and the gas–liquid inclusions in the quartz concentrate were investigated. The total impurities concentrations in the processed grains were found to satisfy the IOTA-STD standard(industry standard for grading high quality fused quartz products). The optimal condition(i.e., the optimal specific plasma enthalpy) for the production of high-purity quartz in arc plasma torches was found to depend on the geological-genetic type and the structural and textural features(i.e., chemical composition and gas–liquid inclusions) of the quartz concentrate.
文摘Testing rocket and space technology objects in ground conditions for resistance to the impact of meteoroids and fragments of space debris can be carried out using shaped charges. To substantiate the design parameters of shaped charges that ensure the formation of aluminum particles in a wide velocity range(from 2.5 to 16 km/s), numerical modeling of the formation process was carried out within the framework of a two-dimensional axisymmetric problem of continuum mechanics using three different computing codes to increase the reliability of the results. The calculations consider shaped charges with a diameter of 20-100 mm with aluminum liners of various shapes. It is shown that the formation of particles with velocities close to the lower limit of the considered range is ensured by gently sloping segmental liners of degressive thickness. To form higher-velocity particles with velocities over 5 km/s, it is proposed to use combined liners, the jet-forming part of which has the shape of a hemisphere of constant thickness or the shape of a semi-ellipsoid or semi-superellipsoid of rotation of degressive thickness.
文摘Artificial neural network(ANN) technology was applied to predict weld hot crack susceptibility of the T-type welded joints of aluminum alloys. A primary prediction model was established by training and testing models with different structures and committee models with different numbers of sub models. The models were improved by decreasing the input variables and data-covering space. Then welding hot crack prediction model committee for T-type joints of aluminum plates was developed. Its input parameters include base metal composition, filler metal composition and welding technique, the output parameter is the total length of the weld hot crack. The performance analysis shows that the predicted trend agrees well with the previous research work.
文摘Studying the vibrational behavior of feed drive systems is important for enhancing the structural performance of computer numerical control(CNC)machines.The preload on the screw and nut position have a great influence on the vibration characteristics of the feed drive as two very important operational conditions.Rotational acceleration of the screw also affects the performance of the CNC feed drive when machining small parts.This paper investigates the influence of preload and nut position on the vibration characteristics of the feed drive system of a CNC metal cutting machine in order to be able to eliminate an observed resonance occurred at high rotational speeds of the screw,corresponding to high feed rates.Additionally,rational structural parameters of the feed drive system are selected in order to increase the rotational acceleration for improving the performance of the CNC machine.Experiments and analyses showed that by selecting specific parameters of feed drive system and simultaneously applying a certain value of preload,a 97%increase in rotational acceleration and 30%time reduction considering the vibration resistance at high rotational speeds can be achieved.
基金financial support from the China Scholarship Council.
文摘We estimate the thermal properties of unsmooth Si nanowires,considering key factors such as size(diameter),surface texture(roughness)and quantum size effects(phonon states)at different temperatures.For nanowires with a diameter of less than 20 nm,we highlight the importance of quantum size effects in heat capacity calculations,using dispersion relations derived from the modified frequency equation for the elasticity of a rod.The thermal conductivities of nanowires with diameters of 37,56,and 115nm are predicted using the Fuchs–Sondheimer model and Soffer’s specular parameter.Notably,the roughness parameters are chosen to reflect the technological characteristics of the real surfaces.Our findings reveal that surface texture plays a significant role in thermal conductivity,particularly in the realm of ballistic heat transfer within nanowires.This study provides practical recommendations for developing new thermal management materials.
文摘Anomalous ion heat transport is analyzed in the T-10 tokamak plasma heated with electron cyclotron resonance heating(ECRH) in second-harmonic extra-ordinary mode. Predictive modeling with empirical scaling for Ohmical heat conductivity shows that in ECRH plasmas the calculated ion temperature could be overestimated, so an increase of anomalous ion heat transport is required. To study this effect two scans are presented: over the EC resonance position and over the ECRH power. The EC resonance position varies from the high-field side to the low-field side by variation of the toroidal magnetic field. The scan over the heating power is presented with on-axis and mixed ECRH regimes. Discharges with high anomalous ion heat transport are obtained in all considered regimes. In these discharges the power balance ion heat conductivity exceeds the neoclassical level by up to 10 times. The high ion heat transport regimes are distinguished by three parameters: the ratio Te/Ti, the normalized electron density gradient R/■, and the ion–ion collisionality νii~*. The combination of high Te/Ti, high νii~*, and R/■=6-10 results in values of normalized anomalous ion heat fluxes up to 10 times higher than in the low transport scenario.
