On the basis of the grain boundary equation by HeUman and corresponding analysis of Worner, this article deals with the interaction range between the second-phase particle （SPP） and grain boundary （GB） as viewed f...On the basis of the grain boundary equation by HeUman and corresponding analysis of Worner, this article deals with the interaction range between the second-phase particle （SPP） and grain boundary （GB） as viewed from the applicability of grain boundary equation. Also, a new expression describing the interaction range has been derived, which solves the problem in theory that the interaction range between SPP and GB can only be qualitatively analyzed previously. It is shown that given the interaction position between SPP and GB, the interaction range can be quantitatively determined by use of this expression.展开更多
An optimization solution to roll shifting strategy for alternately rolling campaign is presented. All the strips in a rolling campaign are divided into narrow strips and wide ones, and shifting position of narrow stri...An optimization solution to roll shifting strategy for alternately rolling campaign is presented. All the strips in a rolling campaign are divided into narrow strips and wide ones, and shifting position of narrow strips is obtained by the recursive method, and then shifting position of wide strips is optimized by NSGA-II which is a multiobjective genetic algorithm. For wide strips, a multi-objective optimization model of roll shifting strategy is pro posed, which takes 3 wear contour factors including edge smoothness, body smoothness and edge drop as optimization objectives. The Pareto optimal front of roll shifting strategy can be gained quickly by NSGA-II, which suggests a series of alternative solutions to roll shifting strategy. Analysis shows that the conflict exists among the 3 objectives. The final optimal solution is selected from the Pareto optimal solutions by the weighted-sum decision-making method. Industrial production proves the validity of the solution, and it can improve strip profile of alternately rolling, reduce strip edge wave, and extend the rolling miles of rolling campaigns.展开更多
Powdering/exfoliating of coatings and scratching galvanized steels and high strength steels （HSS）, are the main forms of surface damage in the forming of which result in increased die maintenance cost and scrap rate...Powdering/exfoliating of coatings and scratching galvanized steels and high strength steels （HSS）, are the main forms of surface damage in the forming of which result in increased die maintenance cost and scrap rate. In this study, a special rectangular box was developed to investigate the behavior and characteristics of surface damage in sheet metal forming （SMF） processes. U-channel forming tests were conducted to study the effect of tool hardness on surface damage in the forming of high strength steels and galvanized steels （hot-dip galvanized and galvannealed steels）. Experimental results indicate that sheet deformation mode influences the severity of surface damage in SMF and surface damage occurs easily at the regions where sheet specimen deforms under the action of compressive stress. Die corner is the position where surface damage initiates. For HSS sheet, surface damage is of major interest due to high forming pressure. The HSS and hot-dip galvanized steels show improved ability of damage-resistance with increased hardness of the forming tool. However, for galvannealed steel it is not the forming tool with the highest hardness value that performs best.展开更多
Based on a rolling model, the simulation of strip thickness during cold continuous rolling was made on the platform software Matrix. The simulation system combined the discrete system with continuous system for high s...Based on a rolling model, the simulation of strip thickness during cold continuous rolling was made on the platform software Matrix. The simulation system combined the discrete system with continuous system for high speed and dynamics. Simulation parameters were calculated by differential element method, and the simulation results fit in with practical data very well.展开更多
The paper analyzed the recycle condition and developing trend of used refractories China and other countries, irwluding research achievements of recycles of used refractories such as MgO-C bricks, Al2O3-MgO-C brics, A...The paper analyzed the recycle condition and developing trend of used refractories China and other countries, irwluding research achievements of recycles of used refractories such as MgO-C bricks, Al2O3-MgO-C brics, Al2O3-SiC-C castable and MgO-Cr2O3 bricks. Recycled refractories exhibit the same or even better properties as compared with the original. In addition, prospects for recycle of used refractories are also discusseded.展开更多
The influence of oxide scales on the corrosion behaviors of B510 L hot-rolled steel strips was investigated in this study. Focused ion beams and scanning electron microscopy were used to observe the morphologies of ox...The influence of oxide scales on the corrosion behaviors of B510 L hot-rolled steel strips was investigated in this study. Focused ion beams and scanning electron microscopy were used to observe the morphologies of oxide scales on the surface and cross sections of the hot-rolled steel. Raman spectroscopy and X-ray diffraction were used for the phase analysis of the oxide scales and corrosion products. The corrosion potential and impedance were measured by anodic polarization and electrochemical impedance spectroscopy. According to the results, oxide scales on the hot-rolled strips mainly comprise iron and iron oxides. The correlation between mass gain and test time follows a power exponential rule in the damp-heat test. The corrosion products are found to be mainly composed of γ-Fe OOH, Fe3O4, ？-Fe OOH, and γ-Fe2O3. The contents of the corrosion products are different on the surfaces of the steels with and without oxide scales. The steel with oxide scales is found to show a higher corrosion resistance and lower corrosion rate.展开更多
Co-base refractory alloy coating was prepared on carbon steel substrate by cold spray technology; microstructure and nano-mechenieal property were examined by scanning electron microscope （SEM） and nano indenter ind...Co-base refractory alloy coating was prepared on carbon steel substrate by cold spray technology; microstructure and nano-mechenieal property were examined by scanning electron microscope （SEM） and nano indenter individually. The results showed that about 250 μm Co-base refractory alloy coating could be deposited o11 steel substrate by cold spray technique, interface between coating and substrate was combined well, and the refractory alloy particle had a significant plastic deformation during deposition process; mixing Ni powders into Co-base refractory alloy powders could increase the density and decrease the nano-hardness of coating, the nano-hardness and elastic modulus of refractory alloy coating was higher than 6 GPa and 160 GPa, respectively.展开更多
The optimal tracking performance for integrator and dead time plant in the case where plant uncertainty and control energy constraints are to be considered jointly is inrestigated. Firstly, an average cost function of...The optimal tracking performance for integrator and dead time plant in the case where plant uncertainty and control energy constraints are to be considered jointly is inrestigated. Firstly, an average cost function of the tracking error and the plant input energy over a class of stochastic model errors are defined. Then, we obtain an internal model controller design method that minimizes the average performance and further studies optimal tracking performance for integrator and dead time plant in the simultaneous presence of plant uncertainty and control energy constraint. The results can be used to evaluate optimal tracking performance and control energy in practical designs.展开更多
基金the financial support from the Supporting Plan for New Century Excellent Talents,MOE,China under grant No.NCET-04-0257the National Natural Science Foundation of China(No.50471070)the Natural Science Foundation of Shanxi Province(No.20051050).
文摘On the basis of the grain boundary equation by HeUman and corresponding analysis of Worner, this article deals with the interaction range between the second-phase particle （SPP） and grain boundary （GB） as viewed from the applicability of grain boundary equation. Also, a new expression describing the interaction range has been derived, which solves the problem in theory that the interaction range between SPP and GB can only be qualitatively analyzed previously. It is shown that given the interaction position between SPP and GB, the interaction range can be quantitatively determined by use of this expression.
基金Item Sponsored by National Natural Science Foundation of China(50974039)
文摘An optimization solution to roll shifting strategy for alternately rolling campaign is presented. All the strips in a rolling campaign are divided into narrow strips and wide ones, and shifting position of narrow strips is obtained by the recursive method, and then shifting position of wide strips is optimized by NSGA-II which is a multiobjective genetic algorithm. For wide strips, a multi-objective optimization model of roll shifting strategy is pro posed, which takes 3 wear contour factors including edge smoothness, body smoothness and edge drop as optimization objectives. The Pareto optimal front of roll shifting strategy can be gained quickly by NSGA-II, which suggests a series of alternative solutions to roll shifting strategy. Analysis shows that the conflict exists among the 3 objectives. The final optimal solution is selected from the Pareto optimal solutions by the weighted-sum decision-making method. Industrial production proves the validity of the solution, and it can improve strip profile of alternately rolling, reduce strip edge wave, and extend the rolling miles of rolling campaigns.
基金supported by the National Natural Science Foundation of China under grant No. 50605043
文摘Powdering/exfoliating of coatings and scratching galvanized steels and high strength steels （HSS）, are the main forms of surface damage in the forming of which result in increased die maintenance cost and scrap rate. In this study, a special rectangular box was developed to investigate the behavior and characteristics of surface damage in sheet metal forming （SMF） processes. U-channel forming tests were conducted to study the effect of tool hardness on surface damage in the forming of high strength steels and galvanized steels （hot-dip galvanized and galvannealed steels）. Experimental results indicate that sheet deformation mode influences the severity of surface damage in SMF and surface damage occurs easily at the regions where sheet specimen deforms under the action of compressive stress. Die corner is the position where surface damage initiates. For HSS sheet, surface damage is of major interest due to high forming pressure. The HSS and hot-dip galvanized steels show improved ability of damage-resistance with increased hardness of the forming tool. However, for galvannealed steel it is not the forming tool with the highest hardness value that performs best.
文摘Based on a rolling model, the simulation of strip thickness during cold continuous rolling was made on the platform software Matrix. The simulation system combined the discrete system with continuous system for high speed and dynamics. Simulation parameters were calculated by differential element method, and the simulation results fit in with practical data very well.
文摘The paper analyzed the recycle condition and developing trend of used refractories China and other countries, irwluding research achievements of recycles of used refractories such as MgO-C bricks, Al2O3-MgO-C brics, Al2O3-SiC-C castable and MgO-Cr2O3 bricks. Recycled refractories exhibit the same or even better properties as compared with the original. In addition, prospects for recycle of used refractories are also discusseded.
基金supported by the National Natural Science Foundation of China(No.51222106)the Fundamental Research Funds for the Central Universities(No.FRF-TP-14-011C1)+1 种基金the Major State Basic Research Development Program of China(No.2014CB643300)the Beijing Municipal Commission of Education
文摘The influence of oxide scales on the corrosion behaviors of B510 L hot-rolled steel strips was investigated in this study. Focused ion beams and scanning electron microscopy were used to observe the morphologies of oxide scales on the surface and cross sections of the hot-rolled steel. Raman spectroscopy and X-ray diffraction were used for the phase analysis of the oxide scales and corrosion products. The corrosion potential and impedance were measured by anodic polarization and electrochemical impedance spectroscopy. According to the results, oxide scales on the hot-rolled strips mainly comprise iron and iron oxides. The correlation between mass gain and test time follows a power exponential rule in the damp-heat test. The corrosion products are found to be mainly composed of γ-Fe OOH, Fe3O4, ？-Fe OOH, and γ-Fe2O3. The contents of the corrosion products are different on the surfaces of the steels with and without oxide scales. The steel with oxide scales is found to show a higher corrosion resistance and lower corrosion rate.
文摘Co-base refractory alloy coating was prepared on carbon steel substrate by cold spray technology; microstructure and nano-mechenieal property were examined by scanning electron microscope （SEM） and nano indenter individually. The results showed that about 250 μm Co-base refractory alloy coating could be deposited o11 steel substrate by cold spray technique, interface between coating and substrate was combined well, and the refractory alloy particle had a significant plastic deformation during deposition process; mixing Ni powders into Co-base refractory alloy powders could increase the density and decrease the nano-hardness of coating, the nano-hardness and elastic modulus of refractory alloy coating was higher than 6 GPa and 160 GPa, respectively.
基金the High Technology Research and Development (863) Program (2003AA517020).
文摘The optimal tracking performance for integrator and dead time plant in the case where plant uncertainty and control energy constraints are to be considered jointly is inrestigated. Firstly, an average cost function of the tracking error and the plant input energy over a class of stochastic model errors are defined. Then, we obtain an internal model controller design method that minimizes the average performance and further studies optimal tracking performance for integrator and dead time plant in the simultaneous presence of plant uncertainty and control energy constraint. The results can be used to evaluate optimal tracking performance and control energy in practical designs.
