This work presents a simple method to functionalise the surface of AZ31 magnesium alloy by applying a duplex MgF_(2)/chitosan coating,which improves its corrosion resistance and provides it with some antibacterial per...This work presents a simple method to functionalise the surface of AZ31 magnesium alloy by applying a duplex MgF_(2)/chitosan coating,which improves its corrosion resistance and provides it with some antibacterial performance.First,the effect of three chitosan solutions with different concentrations on the growth of the bacteria Klebsiella pneumoniae in nutritive medium(TSB)was evaluated by absorbance kinetics experiments,where the chitosan solution at 2%(m/V)was selected for the coating preparation.Before coating application,the AZ31 substrate was pretreated with hydrofluoric acid for 48 hours in order to form a MgF_(2)conversion layer.Subsequently,the coating was applied to the pretreated substrate through the dry-casting method.Samples of the alloy in each surface condition(bare,pretreated,and pretreated+coated with chitosan)were exposed to simulated body fluid(SBF)for 21 days at 37°C,with the solution renewed every 24 hours and the wastes stored.The surfaces were characterised by SEM-EDS,and XPS after the immersion tests,whereas the stored solutions were employed to measure the change in the Mg-ions concentration.Electrochemical impedance spectroscopy and potentiodynamic polarisation were performed in each surface condition to compare their corrosion resistance in SBF.The antibacterial activity of the functionalised surfaces was evaluated by the plate counting method and compared with bare samples.All results were correlated and demonstrate that the modified surface of AZ31 achieved a higher corrosion resistance when it was exposed to SBF,as well as a reduction of the bacterial growth during in vitro tests.展开更多
We study the localized coherent structures ofa generally nonintegrable (2+ 1 )-dimensional KdV equation via a variable separation approach. In a special integrable case, the entrance of some arbitrary functions leads ...We study the localized coherent structures ofa generally nonintegrable (2+ 1 )-dimensional KdV equation via a variable separation approach. In a special integrable case, the entrance of some arbitrary functions leads to abundant coherent structures. However, in the general nonintegrable case, an additional condition has to be introduced for these arbitrary functions. Although the additional condition has been introduced into the solutions of the nonintegrable KdV equation, there still exist many interesting solitary wave structures. Especially, the nonintegrable KdV equation possesses the breather-like localized excitations, and the similar static ring soliton solutions as in the integrable case. Furthermor,in the integrable case, the interaction between two travelling ring solitons is elastic, while in the nonintegrable case we cannot find even the single travelling ring soliton solution.展开更多
Aluminum alloy samples, 6061-T6 and 2219-T42, were exposed to Caribbean seawater for 90 d. The fluctuations of open circuit potential, considered as electrochemical noise (EN), were used to characterize and compare in...Aluminum alloy samples, 6061-T6 and 2219-T42, were exposed to Caribbean seawater for 90 d. The fluctuations of open circuit potential, considered as electrochemical noise (EN), were used to characterize and compare initial pitting events, which appeared on their surfaces. EN analysis was carried out using the power spectral density (PSD) vs frequency. The decrease of the β exponent in PSD graphs indicated a release of spontaneous energy with the progress of pit formation in seawater. The fluctuations were associated with the breakdown and formation of new corrosion layers. The values of β exponent in PSD graphs suggest that corrosion process of AA2219-T42 alloy occurs as a persistent non-stationary process, the dynamics of which is controlled by fractional Brownian motion (fBm), while on AA6061-T6 alloy the corrosion process was dominated by stationary and weakly persistent features, with the contribution of fractional Gaussian noise (fGn). After the exposure in seawater, SEM-EDX analysis revealed insoluble intermetallic particles on the alloys, rich in Cu or Fe and irregularly distributed. The preferential dissolution of Mg and Al occurs from the S-phase (Al2CuMg) of AA2219-T42 alloy.展开更多
A systematic study of the magnetic and structural properties dependence on the particle size was realized.For this,commercial NdFeB powder was separated into five different mean particle sizes using sieves.Besides,fro...A systematic study of the magnetic and structural properties dependence on the particle size was realized.For this,commercial NdFeB powder was separated into five different mean particle sizes using sieves.Besides,from the original powder,eleven samples were also produced by mechanical milling assisted by surfactant,using various milling times.A total of sixteen samples were studied by scanning electron microscopy(SEM),X-ray diffraction(XRD),vibrating sample magnetometry(VSM),and Mdssbauer spectrometry(MS).The particle sizes of the samples vary from the micrometer to the nanometer scale.The crystallite size decreases with decreasing particle size.XRD result indicates that the Nd2Fe14B phase is found in all the samples,and the presence of this phase is also corroborated by MS using six sextets for fitting their spectra,with an additional singlet corresponding to the Nd1.1Fe4B4 phase.The mean hyperfine magnetic field increases with increasing particle size because the magnetic dipolar interaction between the magnetic moment of the particles increases with particle size.From the VSM measurements the magnetic energy density(BH)max values were calculated for different particle sizes,and their maximum value of 34.45 MGOe is obtained for the sample with the particle size of 60μm.展开更多
This work deals with the degradation of AZ31 and AZ91 magnesium alloys when they are exposed to three types of physiological media for seven days at 37°C:Ringer's,Hanks\and simulated body fluid(SBF)solutions....This work deals with the degradation of AZ31 and AZ91 magnesium alloys when they are exposed to three types of physiological media for seven days at 37°C:Ringer's,Hanks\and simulated body fluid(SBF)solutions.A combination of immersions tests and surface characterisation methods were employed to evaluate the attack on the surface,and the stability of the formed corrosion product layers for each alloy/electrolyte system.Measurements of the Mg-ion released into the electrolytes were also carried out in order to be correlated with the degradation of the alloys.Electrochemical impedance spectroscopy(EIS)and potentiodynamic polarisation(PDP)techniques were employed to compare the performance of the alloys in these different aggressive electrolytes.According to the obtained results,the Mg-alloys exposed to Hanks'media were the less affected,which fact was attributed to a higher stability of the corrosion products layer formed in this medium,in comparison of those formed in Ringer's and SBF solutions.In add让ion,the corrosion damage was lower for AZ91 than for AZ31 alloy in all environments due to its higher Al content.The mass loss rates calculated from both immersion tests and electrochemical methods followed the same trend for comparative purposes between alloys.展开更多
In this article,the bunched transport of photoexcited carriers in a GaAs photoconductive semiconductor switch(PCSS)with interdigitated electrodes is investigated under femtosecond laser excitation.Continuous outputs f...In this article,the bunched transport of photoexcited carriers in a GaAs photoconductive semiconductor switch(PCSS)with interdigitated electrodes is investigated under femtosecond laser excitation.Continuous outputs featuring high gain are obtained for single shots and at 1 kHz by varying the optical excitation energy.An ensemble three-valley Monte Carlo simulation is utilized to investigate the transient characteristics and the dynamic process of photoexcited carriers.It demonstrates that the presence of a plasma channel can be attributed to the bunching of high-density electron–hole pairs,which are transported in the form of a highdensity filamentary current.The results provide a picture of the evolution of photoexcited carriers during transient switching.A photoinduced heat effect is analyzed,which reveals the related failure mechanism of GaAs PCSS at various repetition rates.展开更多
Electrocatalytic oxygen reduction via a two-electron pathway(2e^(-)-ORR)is a promising and eco-friendly route for producing hydrogen peroxide(H_(2)O_(2)).Single-atom catalysts(SACs)typically show excellent selectivity...Electrocatalytic oxygen reduction via a two-electron pathway(2e^(-)-ORR)is a promising and eco-friendly route for producing hydrogen peroxide(H_(2)O_(2)).Single-atom catalysts(SACs)typically show excellent selectivity towards 2e^(-)-ORR due to their unique electronic structures and geometrical configurations.The very low density of single-atom active centers,however,often leads to unsatisfactory H_(2)O_(2)yield rate,significantly inhibiting their practical feasibility.Addressing this,we herein introduce fluorine as a secondary doping element into conventional SACs,which does not directly coordinate with the singleatom metal centers but synergize with them in a remote manner.This strategy effectively activates the surrounding carbon atoms and converts them into highly active sites for 2e^(-)-ORR.Consequently,a record-high H_(2)O_(2)yield rate up to 27 mol g^(-1)h^(-1)has been achieved on the Mo–F–C catalyst,with high Faradaic efficiency of 90%.Density functional theory calculations further confirm the very kinetically facile 2e^(-)-ORR over these additional active sites and the superiority of Mo as the single-atom center to others.This strategy thus not only provides a high-performance electrocatalyst for 2e^(-)-ORR but also should shed light on new strategies to significantly increase the active centers number of SACs.展开更多
Combining treatment and diagnosis,called theranostics,which is achieved within single nanoparticle is an ultimate goal of many studies.Herein,we developed a new nanotheranostic agent-Nd^(3+)-sensitized upconversion na...Combining treatment and diagnosis,called theranostics,which is achieved within single nanoparticle is an ultimate goal of many studies.Herein,we developed a new nanotheranostic agent-Nd^(3+)-sensitized upconversion nanoparticles core for dual modal imaging(i.e.,upconversion luminescence imaging and magnetic resonance imaging) and antimony nanoshell for photothermal therapy(PTT).The core-shellshell upconversion nanoparticles(NaYF_(4):Yb,Er@NaYF_(4):Yb,Nd@NaGdF_(4):Nd,named as UCNP) were firstly synthesized using thermal decomposition method and then were coated by antimony shell over the surface of UCNP using simple cost and time effective new method.Furthermore,the surface of UCNP@Sb nanostructures was modified with DSPE-PEG in order to enhance the water solubility and biocompatibility.The final nanotheranostic agent,named as UCNP@Sb-PEG,exhibits very low toxicity,good biocompatibility,very good photothermal therapeutic effect,and efficient upconversion luminescence(UCL) imaging of HeLa cells under only one laser(808 nm) irradiation.The antimony shell is quenching the upconversion emission in pristine nanotheranostic agent,but interestingly,the UCL intensity of the agent recovers progressively under 808 nm laser irradiation due to light induced degradability of antimony shell.Besides,high longitudinal relaxivity(r_(1)) obtained from the experiment approves excellent potential of the nanotheranostic agent for T_(1)-weighted magnetic resonance imaging application.展开更多
The catalytic effects of ZrC powder on the dehydrogenation properties of LiAlH4 prepared by designed mixing processes were systematically investigated.The onset dehydrogenation temperatures for the 10 mol% ZrC-doped s...The catalytic effects of ZrC powder on the dehydrogenation properties of LiAlH4 prepared by designed mixing processes were systematically investigated.The onset dehydrogenation temperatures for the 10 mol% ZrC-doped sample are 85.3 and 148.4℃for the first two dehydrogenation stages,decreasing by 90.7 and 57.8℃,respectively,compared with those of the as-received LiAIH4.The isothermal volumetric measurement indicates that adding ZrC powder could significantly enhance the desorption kinetics of LiAlH4.The reaction constant and Avrami index show that the first dehydrogenation stage is controlled by diffusion mechanism with nucleation rate gradually decreasing and the second stage is a freedom nucleation and subsequent growth process.The microstructures and phase transformation characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS) and Fourier transform infrared spectroscopy(FTIR) reveal that the improved desorption behavior of LiAlH4 is primarily due to the high density of surface defects and embedded catalyst particles on the surface of LiAlH4 particles during the high-energy mixing process.展开更多
We report a theoretical analysis of the electronic,optical,and mechanical properties of zinc-blende Ga P semiconductor material.High-temperature impact on the interesting features has been reported.The temperature dep...We report a theoretical analysis of the electronic,optical,and mechanical properties of zinc-blende Ga P semiconductor material.High-temperature impact on the interesting features has been reported.The temperature dependence of sound velocity and phonon frequencies of Ga P has been determined.The pseudopotential technique has been used in our study.The current study can help in our comprehension of how temperature affects the electronic characteristics of Ga P material.Our findings show generally a good accordance with the experiment.The prediction properties could be used in optoelectronic applications in the high-temperature range.展开更多
The transient transport of photo-generated carriers and temporal variation of the built-in field, during triggering in semi-insulating GaAs photoconductive switches, have been investigated by using a special Monte Car...The transient transport of photo-generated carriers and temporal variation of the built-in field, during triggering in semi-insulating GaAs photoconductive switches, have been investigated by using a special Monte Carlo particle simulator. It shows that the built-in field can exceed the intrinsic avalanche field of semi-insulating GaAs under certain optical and electrical conditions. In such a case, local breakdown ionization is considered to be responsible for the transition in GaAs high-gain switching. The optical and electrical triggering thresholds are calculated and the calculated values of optical and electrical thresholds and partial delay time are in agreement with the published experimental data.展开更多
Four parallel GaAs photoconductive semiconductor switches （PCSSs） were triggered simultaneously by four 1064 nm laser beams. The transient characteristics of four linear electrical pulses were investigated. When the...Four parallel GaAs photoconductive semiconductor switches （PCSSs） were triggered simultaneously by four 1064 nm laser beams. The transient characteristics of four linear electrical pulses were investigated. When the energy of four laser beams were 16.4 m J, 15.6 m J, 15.3 m J, and 13.7 m J, respectively, four stable electrical pulses of about 25 ns width and 10 ns rise time were obtained at the same bias voltage of 8 kV. The maximum switching voltage amplitude was 3.8 kV. With the triggering pulse energy and bias voltage kept constant, the three GaAs PCSSs were triggered at 10 Hz laser pulse. The method of synchronization calculation was given, and the synchronization of four parallel GaAs PCSSs was calculated to be 79 ps. The influence of bias voltage and laser energy on the voltage amplitude of electrical pulse was analyzed. Furthermore, relationship between the synchronization and the jitter time was also discussed.展开更多
Photoelectrochemical(PEC)water splitting is recognized as a sustainable strategy for hydrogen generation due to its abundant hydrogen source,utilization of inexhaustible solar energy,high-purity product,and environmen...Photoelectrochemical(PEC)water splitting is recognized as a sustainable strategy for hydrogen generation due to its abundant hydrogen source,utilization of inexhaustible solar energy,high-purity product,and environment-friendly process.To actualize a practical PEC water splitting,it is paramount to develop efficient,stable,safe,and low-cost photoelectrode materials.Recently,graphitic carbon nitride(g-C3N4)has aroused a great interest in the new generation photoelectrode materials because of its unique features,such as suitable band structure for water splitting,a certain range of visible light absorption,nontoxicity,and good stability.Some inherent defects of g-C3N4,however,seriously impair further improvement on PEC performance,including low electronic conductivity,high recombination rate of photogenerated charges,and limited visible light absorption at long wavelength range.Construction of g-C3N4-based nanosized heteroarrays as photoelectrodes has been regarded as a promising strategy to circumvent these inherent limitations and achieve the high-performance PEC water splitting due to the accelerated exciton separation and the reduced combination of photogenerated electrons/holes.Herein,we summarize in detail the latest progress of g-C3N4-based nanosized heteroarrays in PEC water-splitting photoelectrodes.Firstly,the unique advantages of this type of photoelectrodes,including the highly ordered nanoarray architectures and the heterojunctions,are highlighted.Then,different g-C3N4-based nanosized heteroarrays are comprehensively discussed,in terms of their fabrication methods,PEC capacities,and mechanisms,etc.To conclude,the key challenges and possible solutions for future development on g-C3N4-based nanosized heteroarray photoelectrodes are discussed.展开更多
Fast synthesis and screening of materials are vital to the advance of materials science and are an essential component of the Materials Genome Initiative. Here we use copper-oxide superconductors as an example to demo...Fast synthesis and screening of materials are vital to the advance of materials science and are an essential component of the Materials Genome Initiative. Here we use copper-oxide superconductors as an example to demonstrate the power of integrating combinatorial molecular beam epitaxy synthesis with high-throughput electric transport measurements. Leveraging this method, we have generated a phase diagram with more than 800 compositions in order to unravel the doping dependence of interface superconductivity. In another application of the same method, we have studied the superconductorto-insulator quantum phase transition with unprecedented accuracy in tuning the chemical doping level.展开更多
The velocity of critical surface at microwave band in laser-induced plasma was measured and the results are presented. The results indicate that the velocity of critical surface with low electron density is larger tha...The velocity of critical surface at microwave band in laser-induced plasma was measured and the results are presented. The results indicate that the velocity of critical surface with low electron density is larger than that with the high one; and the velocity of critical surface increases with the laser power density.展开更多
In this paper, thermoluminescence （TL） properties of rare earth Tb^3＋-doped α-Sr2P2O7 were examined after β-irradiation and photoluminescence （PL） properties of samples were examined for proper excitation. All ...In this paper, thermoluminescence （TL） properties of rare earth Tb^3＋-doped α-Sr2P2O7 were examined after β-irradiation and photoluminescence （PL） properties of samples were examined for proper excitation. All the samples were synthesized by high-temperature combustion method. The X-ray diffraction （XRD） and Fourier transform infrared （FTIR） spectroscopy characterization confirms the formation of pure α-phase with crystallized in orthorhombic structure of samples. The PL emission spectra of all samples exhibit characteristic green emission peaks of Tb^3＋ where the peak at 545 nm has the highest emission intensity for Tb^3＋ con- centration of 5.0 mol%. The TL glow curves of β-irradiated Tb^3＋-doped α-Sr2P2O7 phosphors were recorded at different heating rates of 2, 4, and 6 K.s^-1. TL curves of all sample exhibit combination of two peaks： peak at 420 K shifts toward higher 525 K remains unaffected temperature, while peak at with the increase in Tb^3＋ concentration as well as fading effect. The activation energy and kinetic parameters of the samples were evaluated using thermoluminescence peak shape method.展开更多
Electrocatalytic nitrogen reduction reaction (e NRR) at the ambient conditions is attractive for ammonia(NH_(3)) synthesis due to its energy-efficient and eco-friendly features. However, the extremely strong N≡N trip...Electrocatalytic nitrogen reduction reaction (e NRR) at the ambient conditions is attractive for ammonia(NH_(3)) synthesis due to its energy-efficient and eco-friendly features. However, the extremely strong N≡N triple-bonds in nitrogen molecules and the competitive hydrogen evolution reaction lead to the unsatisfactory NH_(3) yield and the Faradaic efficiency (FE) of e NRR, making the development of high-performance catalysts with adequate active sites and high selectivity essential for further development of e NRR.Addressing this, we herein report a Bi and K dual-doped titanium oxide (BTO@KTO) material, which is prepared by a cation exchange reaction between K_(2)Ti_(4)O_(5) and molten BiCl_(2), for high-performance e NRR catalysts. Benefiting from the controllable molten-salt cation exchange process, a highly active surface containing Bi/K sites and rich oxygen vacancies has been obtained on titanium oxide. Under the synergy of these two merits, an efficient e NRR catalysis, with the NH_(3) yield rate of 32.02 μg h^(-1)mg_(cat)^(-1) and the FE of 12.71%, has been achieved, much superior to that of pristine K_(2)Ti_(4)O_(9). This work thus offers a highperformance electrocatalyst for e NRR, and more importantly, a versatile cation-exchange strategy for efficiently manipulating materials’ functionalities.展开更多
The high activity of metallic magnesium and alloys limits its potential in biomedical applications;in recent years,extensive efforts have been devoted to modulating this reactivity.In this work,we present Mg(OH)_(2) a...The high activity of metallic magnesium and alloys limits its potential in biomedical applications;in recent years,extensive efforts have been devoted to modulating this reactivity.In this work,we present Mg(OH)_(2) and TiO_(2)barrier coatings to reduce the degradation of magnesium alloy(Mg-Ca-Zn)surfaces.These coatings were deposited by the anodization method and the spin-coating technique,respectively.The anodized layer was coated with TiO_(2)generated from the hydrolysis of 3%weight of TTIP(Ti[OCH(CH_(3))_(2)]_(4),Titanium(IV)isopropoxide)in 2-Propanol deposited by the spin-coating method.Studying the degradation in Ringer’s solution by electrochemical impedance spectroscopy and OCP revealed a 98%reduction in pittings in uncoated samples after 14 days of immersion.The p H measurements revealed that the TiO_(2)coating reduced the alkalization of the physiological environment,keeping the pH at 6.0 values.In vitro studies of two types of bacteria(E.coli and S.aureus)exhibited zones of inhibition in the agar and activity bactericidal(kill time test).The mechanisms behind the improved degradation resistance and enhanced antibacterial activity are presented and discussed here.Surface modification with Mg(OH)_(2)/TiO_(2)coatings is a promising strategy to control the biodegradation of magnesium implants for bone regeneration.展开更多
By using the standard truncated Painlevé analysis, a Backlund transformation is used to obtain some new types of multi-soliton solutions of the (2+ 1)-dimensional integrable Konopelchenko-Dubrovsky equation from ...By using the standard truncated Painlevé analysis, a Backlund transformation is used to obtain some new types of multi-soliton solutions of the (2+ 1)-dimensional integrable Konopelchenko-Dubrovsky equation from the trivial vacuum solution.展开更多
Carbon nitride,an emerging polymeric semiconductor,has attracted attention in research ranging from photocatalysis to photodetection due to its favorable visible light response and high physicochemical stability.For i...Carbon nitride,an emerging polymeric semiconductor,has attracted attention in research ranging from photocatalysis to photodetection due to its favorable visible light response and high physicochemical stability.For its practical device application,the fabrication of high-quality carbon nitride films on substrates is essential.However,conventional methodologies to achieve high polymerization of carbon nitride are often accompanied by its decomposition,significantly compromising the film quality.Herein,we report an ultrafast fabrication of carbon nitride film by laser direct writing(LDW).The instantaneous high temperature and pressure during LDW can efficiently boost the polymerization of carbon nitride and suppress its decomposition,resulting in high-quality carbon nitride film with excellent mechanical stability with the substrate.Due to the efficient photon-to-electron conversion,it exhibits an outstanding photoelectrochemical water splitting and optoelectronic detection capability,even under strong acid/alkaline conditions.This study thus offers a facile and efficient LDW strategy for the rapid fabrication of carbon nitride film photoelectrodes,demonstrating its great feasibility in multifunctional photoelectrical applications,including but not limited to photoelectrochemical water splitting and optoelectronic detection.展开更多
基金CONACYT for his scholarship as a Ph.D.student at CINVESTAV-IPN
文摘This work presents a simple method to functionalise the surface of AZ31 magnesium alloy by applying a duplex MgF_(2)/chitosan coating,which improves its corrosion resistance and provides it with some antibacterial performance.First,the effect of three chitosan solutions with different concentrations on the growth of the bacteria Klebsiella pneumoniae in nutritive medium(TSB)was evaluated by absorbance kinetics experiments,where the chitosan solution at 2%(m/V)was selected for the coating preparation.Before coating application,the AZ31 substrate was pretreated with hydrofluoric acid for 48 hours in order to form a MgF_(2)conversion layer.Subsequently,the coating was applied to the pretreated substrate through the dry-casting method.Samples of the alloy in each surface condition(bare,pretreated,and pretreated+coated with chitosan)were exposed to simulated body fluid(SBF)for 21 days at 37°C,with the solution renewed every 24 hours and the wastes stored.The surfaces were characterised by SEM-EDS,and XPS after the immersion tests,whereas the stored solutions were employed to measure the change in the Mg-ions concentration.Electrochemical impedance spectroscopy and potentiodynamic polarisation were performed in each surface condition to compare their corrosion resistance in SBF.The antibacterial activity of the functionalised surfaces was evaluated by the plate counting method and compared with bare samples.All results were correlated and demonstrate that the modified surface of AZ31 achieved a higher corrosion resistance when it was exposed to SBF,as well as a reduction of the bacterial growth during in vitro tests.
文摘We study the localized coherent structures ofa generally nonintegrable (2+ 1 )-dimensional KdV equation via a variable separation approach. In a special integrable case, the entrance of some arbitrary functions leads to abundant coherent structures. However, in the general nonintegrable case, an additional condition has to be introduced for these arbitrary functions. Although the additional condition has been introduced into the solutions of the nonintegrable KdV equation, there still exist many interesting solitary wave structures. Especially, the nonintegrable KdV equation possesses the breather-like localized excitations, and the similar static ring soliton solutions as in the integrable case. Furthermor,in the integrable case, the interaction between two travelling ring solitons is elastic, while in the nonintegrable case we cannot find even the single travelling ring soliton solution.
基金the partial financial support of this study from CONACYT (Grant 179110)
文摘Aluminum alloy samples, 6061-T6 and 2219-T42, were exposed to Caribbean seawater for 90 d. The fluctuations of open circuit potential, considered as electrochemical noise (EN), were used to characterize and compare initial pitting events, which appeared on their surfaces. EN analysis was carried out using the power spectral density (PSD) vs frequency. The decrease of the β exponent in PSD graphs indicated a release of spontaneous energy with the progress of pit formation in seawater. The fluctuations were associated with the breakdown and formation of new corrosion layers. The values of β exponent in PSD graphs suggest that corrosion process of AA2219-T42 alloy occurs as a persistent non-stationary process, the dynamics of which is controlled by fractional Brownian motion (fBm), while on AA6061-T6 alloy the corrosion process was dominated by stationary and weakly persistent features, with the contribution of fractional Gaussian noise (fGn). After the exposure in seawater, SEM-EDX analysis revealed insoluble intermetallic particles on the alloys, rich in Cu or Fe and irregularly distributed. The preferential dissolution of Mg and Al occurs from the S-phase (Al2CuMg) of AA2219-T42 alloy.
基金Project supported by Colciencias,Colombian Agency,ColombiaUniversidad del Valle,Colombia(110671250407)+1 种基金the projects 691235-INAPEM of the H2020 ProgramW911NF-17-S-0003 US Army。
文摘A systematic study of the magnetic and structural properties dependence on the particle size was realized.For this,commercial NdFeB powder was separated into five different mean particle sizes using sieves.Besides,from the original powder,eleven samples were also produced by mechanical milling assisted by surfactant,using various milling times.A total of sixteen samples were studied by scanning electron microscopy(SEM),X-ray diffraction(XRD),vibrating sample magnetometry(VSM),and Mdssbauer spectrometry(MS).The particle sizes of the samples vary from the micrometer to the nanometer scale.The crystallite size decreases with decreasing particle size.XRD result indicates that the Nd2Fe14B phase is found in all the samples,and the presence of this phase is also corroborated by MS using six sextets for fitting their spectra,with an additional singlet corresponding to the Nd1.1Fe4B4 phase.The mean hyperfine magnetic field increases with increasing particle size because the magnetic dipolar interaction between the magnetic moment of the particles increases with particle size.From the VSM measurements the magnetic energy density(BH)max values were calculated for different particle sizes,and their maximum value of 34.45 MGOe is obtained for the sample with the particle size of 60μm.
文摘This work deals with the degradation of AZ31 and AZ91 magnesium alloys when they are exposed to three types of physiological media for seven days at 37°C:Ringer's,Hanks\and simulated body fluid(SBF)solutions.A combination of immersions tests and surface characterisation methods were employed to evaluate the attack on the surface,and the stability of the formed corrosion product layers for each alloy/electrolyte system.Measurements of the Mg-ion released into the electrolytes were also carried out in order to be correlated with the degradation of the alloys.Electrochemical impedance spectroscopy(EIS)and potentiodynamic polarisation(PDP)techniques were employed to compare the performance of the alloys in these different aggressive electrolytes.According to the obtained results,the Mg-alloys exposed to Hanks'media were the less affected,which fact was attributed to a higher stability of the corrosion products layer formed in this medium,in comparison of those formed in Ringer's and SBF solutions.In add让ion,the corrosion damage was lower for AZ91 than for AZ31 alloy in all environments due to its higher Al content.The mass loss rates calculated from both immersion tests and electrochemical methods followed the same trend for comparative purposes between alloys.
基金supported in part by National Natural Science Foundation of China(Nos.51877177 and 52007152)in part by the Scientific Research Program Funded by Shaanxi Provincial Education Department(Nos.21JP085 and 21JP088)+3 种基金the Youth Innovation Team of Shaanxi Universitiesin part by the Natural Science Basic Research Plan of Shaanxi Province(Nos.2021JZ-48 and 2020JM-462)in part by Fellowship of China Postdoctoral Science Foundation(No.2021M702639)in part by Open Research Fund of State Key Laboratory of Pulsed Power Laser Technology(No.SKL2020KF01)。
文摘In this article,the bunched transport of photoexcited carriers in a GaAs photoconductive semiconductor switch(PCSS)with interdigitated electrodes is investigated under femtosecond laser excitation.Continuous outputs featuring high gain are obtained for single shots and at 1 kHz by varying the optical excitation energy.An ensemble three-valley Monte Carlo simulation is utilized to investigate the transient characteristics and the dynamic process of photoexcited carriers.It demonstrates that the presence of a plasma channel can be attributed to the bunching of high-density electron–hole pairs,which are transported in the form of a highdensity filamentary current.The results provide a picture of the evolution of photoexcited carriers during transient switching.A photoinduced heat effect is analyzed,which reveals the related failure mechanism of GaAs PCSS at various repetition rates.
基金supported by the National Natural Science Foundation of China(Nos.22179093 and 21905202)。
文摘Electrocatalytic oxygen reduction via a two-electron pathway(2e^(-)-ORR)is a promising and eco-friendly route for producing hydrogen peroxide(H_(2)O_(2)).Single-atom catalysts(SACs)typically show excellent selectivity towards 2e^(-)-ORR due to their unique electronic structures and geometrical configurations.The very low density of single-atom active centers,however,often leads to unsatisfactory H_(2)O_(2)yield rate,significantly inhibiting their practical feasibility.Addressing this,we herein introduce fluorine as a secondary doping element into conventional SACs,which does not directly coordinate with the singleatom metal centers but synergize with them in a remote manner.This strategy effectively activates the surrounding carbon atoms and converts them into highly active sites for 2e^(-)-ORR.Consequently,a record-high H_(2)O_(2)yield rate up to 27 mol g^(-1)h^(-1)has been achieved on the Mo–F–C catalyst,with high Faradaic efficiency of 90%.Density functional theory calculations further confirm the very kinetically facile 2e^(-)-ORR over these additional active sites and the superiority of Mo as the single-atom center to others.This strategy thus not only provides a high-performance electrocatalyst for 2e^(-)-ORR but also should shed light on new strategies to significantly increase the active centers number of SACs.
基金Project supported by the National Natural Science Foundation of China(51872183)"Shuguang Program"supported by Shanghai Education Development Foundation+1 种基金Shanghai Municipal Education Commission(19SG38)the National Basic Research Program of China(2016YFA0201600)。
文摘Combining treatment and diagnosis,called theranostics,which is achieved within single nanoparticle is an ultimate goal of many studies.Herein,we developed a new nanotheranostic agent-Nd^(3+)-sensitized upconversion nanoparticles core for dual modal imaging(i.e.,upconversion luminescence imaging and magnetic resonance imaging) and antimony nanoshell for photothermal therapy(PTT).The core-shellshell upconversion nanoparticles(NaYF_(4):Yb,Er@NaYF_(4):Yb,Nd@NaGdF_(4):Nd,named as UCNP) were firstly synthesized using thermal decomposition method and then were coated by antimony shell over the surface of UCNP using simple cost and time effective new method.Furthermore,the surface of UCNP@Sb nanostructures was modified with DSPE-PEG in order to enhance the water solubility and biocompatibility.The final nanotheranostic agent,named as UCNP@Sb-PEG,exhibits very low toxicity,good biocompatibility,very good photothermal therapeutic effect,and efficient upconversion luminescence(UCL) imaging of HeLa cells under only one laser(808 nm) irradiation.The antimony shell is quenching the upconversion emission in pristine nanotheranostic agent,but interestingly,the UCL intensity of the agent recovers progressively under 808 nm laser irradiation due to light induced degradability of antimony shell.Besides,high longitudinal relaxivity(r_(1)) obtained from the experiment approves excellent potential of the nanotheranostic agent for T_(1)-weighted magnetic resonance imaging application.
基金financially supported by the National High Technology Research and Development Program of China (No.2006AA05Z132)the National Natural Science Foundation of China (No.51471054)
文摘The catalytic effects of ZrC powder on the dehydrogenation properties of LiAlH4 prepared by designed mixing processes were systematically investigated.The onset dehydrogenation temperatures for the 10 mol% ZrC-doped sample are 85.3 and 148.4℃for the first two dehydrogenation stages,decreasing by 90.7 and 57.8℃,respectively,compared with those of the as-received LiAIH4.The isothermal volumetric measurement indicates that adding ZrC powder could significantly enhance the desorption kinetics of LiAlH4.The reaction constant and Avrami index show that the first dehydrogenation stage is controlled by diffusion mechanism with nucleation rate gradually decreasing and the second stage is a freedom nucleation and subsequent growth process.The microstructures and phase transformation characterized by scanning electron microscopy(SEM),X-ray diffraction(XRD),X-ray photoelectron spectroscopy(XPS) and Fourier transform infrared spectroscopy(FTIR) reveal that the improved desorption behavior of LiAlH4 is primarily due to the high density of surface defects and embedded catalyst particles on the surface of LiAlH4 particles during the high-energy mixing process.
文摘We report a theoretical analysis of the electronic,optical,and mechanical properties of zinc-blende Ga P semiconductor material.High-temperature impact on the interesting features has been reported.The temperature dependence of sound velocity and phonon frequencies of Ga P has been determined.The pseudopotential technique has been used in our study.The current study can help in our comprehension of how temperature affects the electronic characteristics of Ga P material.Our findings show generally a good accordance with the experiment.The prediction properties could be used in optoelectronic applications in the high-temperature range.
基金Supported by the National Natural Science Foundation of China under Grant No.50077017.
文摘The transient transport of photo-generated carriers and temporal variation of the built-in field, during triggering in semi-insulating GaAs photoconductive switches, have been investigated by using a special Monte Carlo particle simulator. It shows that the built-in field can exceed the intrinsic avalanche field of semi-insulating GaAs under certain optical and electrical conditions. In such a case, local breakdown ionization is considered to be responsible for the transition in GaAs high-gain switching. The optical and electrical triggering thresholds are calculated and the calculated values of optical and electrical thresholds and partial delay time are in agreement with the published experimental data.
基金supported by the Key Project of National Natural Science Foundation of China(No.50837005)the National Science Foundation of China(No.10876026)the Foundation of the State Key Laboratory of Electrical Insulation for Power Equipment(No.EIPE09203)
文摘Four parallel GaAs photoconductive semiconductor switches （PCSSs） were triggered simultaneously by four 1064 nm laser beams. The transient characteristics of four linear electrical pulses were investigated. When the energy of four laser beams were 16.4 m J, 15.6 m J, 15.3 m J, and 13.7 m J, respectively, four stable electrical pulses of about 25 ns width and 10 ns rise time were obtained at the same bias voltage of 8 kV. The maximum switching voltage amplitude was 3.8 kV. With the triggering pulse energy and bias voltage kept constant, the three GaAs PCSSs were triggered at 10 Hz laser pulse. The method of synchronization calculation was given, and the synchronization of four parallel GaAs PCSSs was calculated to be 79 ps. The influence of bias voltage and laser energy on the voltage amplitude of electrical pulse was analyzed. Furthermore, relationship between the synchronization and the jitter time was also discussed.
基金This study was supported by Developed and Applied Funding of Tianjin Normal University(135202XK1702)Program for Innovative Research in the University of Tianjin(TD13-5077)+1 种基金National Natural Science Foundation of China(Number 21905202)Australian Research Council(ARC)through Discovery Early Career Researcher Awards(DECRA,DE170100871).
文摘Photoelectrochemical(PEC)water splitting is recognized as a sustainable strategy for hydrogen generation due to its abundant hydrogen source,utilization of inexhaustible solar energy,high-purity product,and environment-friendly process.To actualize a practical PEC water splitting,it is paramount to develop efficient,stable,safe,and low-cost photoelectrode materials.Recently,graphitic carbon nitride(g-C3N4)has aroused a great interest in the new generation photoelectrode materials because of its unique features,such as suitable band structure for water splitting,a certain range of visible light absorption,nontoxicity,and good stability.Some inherent defects of g-C3N4,however,seriously impair further improvement on PEC performance,including low electronic conductivity,high recombination rate of photogenerated charges,and limited visible light absorption at long wavelength range.Construction of g-C3N4-based nanosized heteroarrays as photoelectrodes has been regarded as a promising strategy to circumvent these inherent limitations and achieve the high-performance PEC water splitting due to the accelerated exciton separation and the reduced combination of photogenerated electrons/holes.Herein,we summarize in detail the latest progress of g-C3N4-based nanosized heteroarrays in PEC water-splitting photoelectrodes.Firstly,the unique advantages of this type of photoelectrodes,including the highly ordered nanoarray architectures and the heterojunctions,are highlighted.Then,different g-C3N4-based nanosized heteroarrays are comprehensively discussed,in terms of their fabrication methods,PEC capacities,and mechanisms,etc.To conclude,the key challenges and possible solutions for future development on g-C3N4-based nanosized heteroarray photoelectrodes are discussed.
文摘Fast synthesis and screening of materials are vital to the advance of materials science and are an essential component of the Materials Genome Initiative. Here we use copper-oxide superconductors as an example to demonstrate the power of integrating combinatorial molecular beam epitaxy synthesis with high-throughput electric transport measurements. Leveraging this method, we have generated a phase diagram with more than 800 compositions in order to unravel the doping dependence of interface superconductivity. In another application of the same method, we have studied the superconductorto-insulator quantum phase transition with unprecedented accuracy in tuning the chemical doping level.
文摘The velocity of critical surface at microwave band in laser-induced plasma was measured and the results are presented. The results indicate that the velocity of critical surface with low electron density is larger than that with the high one; and the velocity of critical surface increases with the laser power density.
文摘In this paper, thermoluminescence （TL） properties of rare earth Tb^3＋-doped α-Sr2P2O7 were examined after β-irradiation and photoluminescence （PL） properties of samples were examined for proper excitation. All the samples were synthesized by high-temperature combustion method. The X-ray diffraction （XRD） and Fourier transform infrared （FTIR） spectroscopy characterization confirms the formation of pure α-phase with crystallized in orthorhombic structure of samples. The PL emission spectra of all samples exhibit characteristic green emission peaks of Tb^3＋ where the peak at 545 nm has the highest emission intensity for Tb^3＋ con- centration of 5.0 mol%. The TL glow curves of β-irradiated Tb^3＋-doped α-Sr2P2O7 phosphors were recorded at different heating rates of 2, 4, and 6 K.s^-1. TL curves of all sample exhibit combination of two peaks： peak at 420 K shifts toward higher 525 K remains unaffected temperature, while peak at with the increase in Tb^3＋ concentration as well as fading effect. The activation energy and kinetic parameters of the samples were evaluated using thermoluminescence peak shape method.
基金supported by the National Natural Science Foundation of China (22179093)。
文摘Electrocatalytic nitrogen reduction reaction (e NRR) at the ambient conditions is attractive for ammonia(NH_(3)) synthesis due to its energy-efficient and eco-friendly features. However, the extremely strong N≡N triple-bonds in nitrogen molecules and the competitive hydrogen evolution reaction lead to the unsatisfactory NH_(3) yield and the Faradaic efficiency (FE) of e NRR, making the development of high-performance catalysts with adequate active sites and high selectivity essential for further development of e NRR.Addressing this, we herein report a Bi and K dual-doped titanium oxide (BTO@KTO) material, which is prepared by a cation exchange reaction between K_(2)Ti_(4)O_(5) and molten BiCl_(2), for high-performance e NRR catalysts. Benefiting from the controllable molten-salt cation exchange process, a highly active surface containing Bi/K sites and rich oxygen vacancies has been obtained on titanium oxide. Under the synergy of these two merits, an efficient e NRR catalysis, with the NH_(3) yield rate of 32.02 μg h^(-1)mg_(cat)^(-1) and the FE of 12.71%, has been achieved, much superior to that of pristine K_(2)Ti_(4)O_(9). This work thus offers a highperformance electrocatalyst for e NRR, and more importantly, a versatile cation-exchange strategy for efficiently manipulating materials’ functionalities.
基金financed by the FOMIX-Yucatán 2008-108160,CONACYT LAB-2009-01-123913,292692,294643,188345,and 204822 projectsthe financial support received from CONACYT。
文摘The high activity of metallic magnesium and alloys limits its potential in biomedical applications;in recent years,extensive efforts have been devoted to modulating this reactivity.In this work,we present Mg(OH)_(2) and TiO_(2)barrier coatings to reduce the degradation of magnesium alloy(Mg-Ca-Zn)surfaces.These coatings were deposited by the anodization method and the spin-coating technique,respectively.The anodized layer was coated with TiO_(2)generated from the hydrolysis of 3%weight of TTIP(Ti[OCH(CH_(3))_(2)]_(4),Titanium(IV)isopropoxide)in 2-Propanol deposited by the spin-coating method.Studying the degradation in Ringer’s solution by electrochemical impedance spectroscopy and OCP revealed a 98%reduction in pittings in uncoated samples after 14 days of immersion.The p H measurements revealed that the TiO_(2)coating reduced the alkalization of the physiological environment,keeping the pH at 6.0 values.In vitro studies of two types of bacteria(E.coli and S.aureus)exhibited zones of inhibition in the agar and activity bactericidal(kill time test).The mechanisms behind the improved degradation resistance and enhanced antibacterial activity are presented and discussed here.Surface modification with Mg(OH)_(2)/TiO_(2)coatings is a promising strategy to control the biodegradation of magnesium implants for bone regeneration.
基金Supported by the Outstanding Youth Foundationthe National Natural Science Foundation of Chinathe Doctoral Program of Higher Education.
文摘By using the standard truncated Painlevé analysis, a Backlund transformation is used to obtain some new types of multi-soliton solutions of the (2+ 1)-dimensional integrable Konopelchenko-Dubrovsky equation from the trivial vacuum solution.
基金Australian Research Council,Grant/Award Number:DP200100365National Natural Science Foundation of China,Grant/Award Numbers:21905144,21905202,22002107,22179093+1 种基金Qinghai Provincial Department of Science and Technology,Grant/Award Number:2021-zj-702Tianjin University,Grant/Award Number:2021XZC-0052。
文摘Carbon nitride,an emerging polymeric semiconductor,has attracted attention in research ranging from photocatalysis to photodetection due to its favorable visible light response and high physicochemical stability.For its practical device application,the fabrication of high-quality carbon nitride films on substrates is essential.However,conventional methodologies to achieve high polymerization of carbon nitride are often accompanied by its decomposition,significantly compromising the film quality.Herein,we report an ultrafast fabrication of carbon nitride film by laser direct writing(LDW).The instantaneous high temperature and pressure during LDW can efficiently boost the polymerization of carbon nitride and suppress its decomposition,resulting in high-quality carbon nitride film with excellent mechanical stability with the substrate.Due to the efficient photon-to-electron conversion,it exhibits an outstanding photoelectrochemical water splitting and optoelectronic detection capability,even under strong acid/alkaline conditions.This study thus offers a facile and efficient LDW strategy for the rapid fabrication of carbon nitride film photoelectrodes,demonstrating its great feasibility in multifunctional photoelectrical applications,including but not limited to photoelectrochemical water splitting and optoelectronic detection.
