The formation and growth of thermal fatigue crack in chromium wear resistant cast iron was investigated, and the effect of hot deformation on the crack was analyzed by means of optical microscope and scanning electron...The formation and growth of thermal fatigue crack in chromium wear resistant cast iron was investigated, and the effect of hot deformation on the crack was analyzed by means of optical microscope and scanning electron microscope and high frequency induction thermal fatigue tester. The results show that eutectic carbide is the main location and passage for initiation and extension of thermal fatigue cracks, hot deformation can improve the eutectic carbiders morphology and distribution, inhibit the generation and propagation of thermal fatigue cracks. In the experiment, the propagation rate of thermal fatigue crack reduces with the quantity of hot deformation increasing, which was analyzed in the point view of the activation energy of crack propagation.展开更多
The morphology of carbides, as well as the generation and propagation of fatigue cracks in a wear resistant white cast iron after impact fatigue test were observed by means of optical microscope and SEM, and the relat...The morphology of carbides, as well as the generation and propagation of fatigue cracks in a wear resistant white cast iron after impact fatigue test were observed by means of optical microscope and SEM, and the relationship among the content of RE (rare earths) in the wear resistant white cast iron and the heating temperature as well as the length and propagation speed of the fatigue cracks were determined. Based on the obtained results, the effect of RE modification and heat treatment on the impact fatigue property was further studied. Experimental results show that addition of RE can defer the time required for the generation of fatigue cracks, reduce their propagation speed and increase the impact fatigue resistance. The aforesaid effect is more noticeable in case of combined RE modification with heat treatment, which can be attributed to the variation in morphology and the distribution of the eutectic carbide network.展开更多
After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffrac...After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffraction （ XRD ）, energy dispersive spectrum（ EDS ）, transmission electron microscope（TEM） and hardness tester. The results show that the hardfacing layers have higher tempering stability and secondary hardening property. After quenching at 820 ℃ ,the hardness value（ HRC37 ） and the microstructure of the layers are similar to that normalized at 820 - 1 000 ℃. The tempering stability and the hardness increases with increasing quench temperature, which is attributed to the amount of the alloy element in the matrix. These results are very helpful for improving the mechanical properties of the hardfacing layers.展开更多
The effect of adding RE to plating bath on microstructure and corrosion resistance of Ni-Co alloy coatings prepared by pulse reversal current electrodeposition was studied by means of SEM/EDS, electrochemical analysis...The effect of adding RE to plating bath on microstructure and corrosion resistance of Ni-Co alloy coatings prepared by pulse reversal current electrodeposition was studied by means of SEM/EDS, electrochemical analysis and corrosion mass loss etc. The results show that adding proper RE to plating solution can promote the microstructure of coatings compacter, the surface smoother and the crystal finer, and improve the corrosion resistance. The coatings exhibite the highest corrosion resistance when the concentration of RE reaches 0.25 g·L -1. The reason of increasing corrosion resistance by adding RE was also investigated.展开更多
The microstructure and corrosion resistance of the RE-doped electrodeposition Ni coatings fabricated with direct current electrodeposition (DC), pulse current electrodeposition (PC), and pulse reversal current electro...The microstructure and corrosion resistance of the RE-doped electrodeposition Ni coatings fabricated with direct current electrodeposition (DC), pulse current electrodeposition (PC), and pulse reversal current electrodeposition (PRC) were investigated by means of SEM, electrochemical analysis and corrosion mass loss, etc. The results show that the Ni coatings produced with PRC exhibit the highest corrosion resistance among the three kinds of coatings, and the corrosion resistance of the PC coatings is higher than that of the DC coatings. The reason is that the surface of the PRC coatings is compacter, crystal finer compared with the coarse surface of DC and PC coatings.展开更多
The low-energy, multi-impact fracture resistance and the abrasiveness of the cross-rolled low alloy white cast iron grinding balls were studied after heat treatments at residual rolling temperature. Moreover, the mean...The low-energy, multi-impact fracture resistance and the abrasiveness of the cross-rolled low alloy white cast iron grinding balls were studied after heat treatments at residual rolling temperature. Moreover, the means by which they are damaged and characters of the wear surface were analyzed. The results show that high resistance to impact fracture and high abrasiveness can be achieved after appropriate heat treatment at residual rolling temperature. This kind of heat treatment technology has several advantages under low impact and hard abrasive. These results are very useful for determining the optimized heat treatment technology at residual rolling temperatures.展开更多
The corrosion behavior of a CuCrNiAl alloy with NaCl deposit at 700 and 900℃ was studied by means of metalloscope, XRD, SEM/EDX, and thermogravimetric analysis. The results indicated that the corrosion of the CuCrNiA...The corrosion behavior of a CuCrNiAl alloy with NaCl deposit at 700 and 900℃ was studied by means of metalloscope, XRD, SEM/EDX, and thermogravimetric analysis. The results indicated that the corrosion of the CuCrNiAl alloy beneath the NaCl deposit is severe; the corrosion production is loose and easy to scale off; the Cr phase is easier to erode than the Cu phase, and the contents of Cu and Cr decrease when the content of Ni increases in the matrix of the alloy beneath the corrosion region. The effects of distortion on the corrosion of the CuCrNiAl alloy were discussed, and the acceleration mechanisms of NaCl on the corrosion were also discussed.展开更多
The corrosion behavior of a CuCrNiAl alloy in HCl solutions was studied by means of metallograph, XRD, SEM/EDX and TEM methods. The results show that in low concentration of HCl solutions, Cu of CuCrNiAl alloy is more...The corrosion behavior of a CuCrNiAl alloy in HCl solutions was studied by means of metallograph, XRD, SEM/EDX and TEM methods. The results show that in low concentration of HCl solutions, Cu of CuCrNiAl alloy is more easily subject to corrsion than Cr; the dechromisation of the CuCrNiAl alloy occurs at a certain concentration of HCl solutions, at the same time Al of CuCrNiAl alloy is subject to corrosion also. The dechromisation corrosion occurs initially at the interface between Cr phase and Cu phase, then it gradually extends Cr phase until Cr phase is dissolved completely. It is also revealed that the tendency of dechromisaion of the CuCrNiAl alloy increases with the increase in concentration and temperature of HCl solutions.展开更多
The effect of rare earth elements on eutectic carbide′s morphology of low chromium semi steel in as cast state and after heat treatment was investigated, and accordingly, the thermal fatigue property of this mater...The effect of rare earth elements on eutectic carbide′s morphology of low chromium semi steel in as cast state and after heat treatment was investigated, and accordingly, the thermal fatigue property of this material was studied. The results show that RE can improve the eutectic carbide′s morphology, inhibit the formation and propagation of thermal fatigue cracks, therefore, promote the thermal fatigue property, which is more noticeable in case of the RE modification in combination with heat treatment. The optimal thermal fatigue property can be obtained when treated with 0.2% RE modification as well as normalization at 950 ℃ for 3 h.展开更多
The effect of rare earth elements on dynamics of thermal fatigue crack′s propagation in low alloy white cast iron was studied. The results show that the generation and growth of the thermal fatigue crack can be restr...The effect of rare earth elements on dynamics of thermal fatigue crack′s propagation in low alloy white cast iron was studied. The results show that the generation and growth of the thermal fatigue crack can be restrained and the activation energy for the crack′s propagation can be increased by adding a certain amount of RE, and especially, the restraint for the thermal fatigue crack′s propagation is more evident under the combined action of RE and heat treatment at high working temperatures, which can be attributed to the segregation of RE to interfaces, the participation of granular carbides and the change of eutectic carbide morphology.展开更多
基金ItemSponsored by Guiding Programof Science and Technology Research of Jilin Province of China (20000513)
文摘The formation and growth of thermal fatigue crack in chromium wear resistant cast iron was investigated, and the effect of hot deformation on the crack was analyzed by means of optical microscope and scanning electron microscope and high frequency induction thermal fatigue tester. The results show that eutectic carbide is the main location and passage for initiation and extension of thermal fatigue cracks, hot deformation can improve the eutectic carbiders morphology and distribution, inhibit the generation and propagation of thermal fatigue cracks. In the experiment, the propagation rate of thermal fatigue crack reduces with the quantity of hot deformation increasing, which was analyzed in the point view of the activation energy of crack propagation.
文摘The morphology of carbides, as well as the generation and propagation of fatigue cracks in a wear resistant white cast iron after impact fatigue test were observed by means of optical microscope and SEM, and the relationship among the content of RE (rare earths) in the wear resistant white cast iron and the heating temperature as well as the length and propagation speed of the fatigue cracks were determined. Based on the obtained results, the effect of RE modification and heat treatment on the impact fatigue property was further studied. Experimental results show that addition of RE can defer the time required for the generation of fatigue cracks, reduce their propagation speed and increase the impact fatigue resistance. The aforesaid effect is more noticeable in case of combined RE modification with heat treatment, which can be attributed to the variation in morphology and the distribution of the eutectic carbide network.
文摘After different heat treatment processes, the metal compound, the microstructure and the hardness of the C-Cr-W- Mo-V-RE Fe-based hardfacing layers are investigated by means of metallographic microscope, X-ray diffraction （ XRD ）, energy dispersive spectrum（ EDS ）, transmission electron microscope（TEM） and hardness tester. The results show that the hardfacing layers have higher tempering stability and secondary hardening property. After quenching at 820 ℃ ,the hardness value（ HRC37 ） and the microstructure of the layers are similar to that normalized at 820 - 1 000 ℃. The tempering stability and the hardness increases with increasing quench temperature, which is attributed to the amount of the alloy element in the matrix. These results are very helpful for improving the mechanical properties of the hardfacing layers.
文摘The effect of adding RE to plating bath on microstructure and corrosion resistance of Ni-Co alloy coatings prepared by pulse reversal current electrodeposition was studied by means of SEM/EDS, electrochemical analysis and corrosion mass loss etc. The results show that adding proper RE to plating solution can promote the microstructure of coatings compacter, the surface smoother and the crystal finer, and improve the corrosion resistance. The coatings exhibite the highest corrosion resistance when the concentration of RE reaches 0.25 g·L -1. The reason of increasing corrosion resistance by adding RE was also investigated.
文摘The microstructure and corrosion resistance of the RE-doped electrodeposition Ni coatings fabricated with direct current electrodeposition (DC), pulse current electrodeposition (PC), and pulse reversal current electrodeposition (PRC) were investigated by means of SEM, electrochemical analysis and corrosion mass loss, etc. The results show that the Ni coatings produced with PRC exhibit the highest corrosion resistance among the three kinds of coatings, and the corrosion resistance of the PC coatings is higher than that of the DC coatings. The reason is that the surface of the PRC coatings is compacter, crystal finer compared with the coarse surface of DC and PC coatings.
基金Item Sponsored by Guiding Program of Science and Technology Research of Jilin Province of China (20000513)
文摘The low-energy, multi-impact fracture resistance and the abrasiveness of the cross-rolled low alloy white cast iron grinding balls were studied after heat treatments at residual rolling temperature. Moreover, the means by which they are damaged and characters of the wear surface were analyzed. The results show that high resistance to impact fracture and high abrasiveness can be achieved after appropriate heat treatment at residual rolling temperature. This kind of heat treatment technology has several advantages under low impact and hard abrasive. These results are very useful for determining the optimized heat treatment technology at residual rolling temperatures.
文摘The corrosion behavior of a CuCrNiAl alloy with NaCl deposit at 700 and 900℃ was studied by means of metalloscope, XRD, SEM/EDX, and thermogravimetric analysis. The results indicated that the corrosion of the CuCrNiAl alloy beneath the NaCl deposit is severe; the corrosion production is loose and easy to scale off; the Cr phase is easier to erode than the Cu phase, and the contents of Cu and Cr decrease when the content of Ni increases in the matrix of the alloy beneath the corrosion region. The effects of distortion on the corrosion of the CuCrNiAl alloy were discussed, and the acceleration mechanisms of NaCl on the corrosion were also discussed.
文摘The corrosion behavior of a CuCrNiAl alloy in HCl solutions was studied by means of metallograph, XRD, SEM/EDX and TEM methods. The results show that in low concentration of HCl solutions, Cu of CuCrNiAl alloy is more easily subject to corrsion than Cr; the dechromisation of the CuCrNiAl alloy occurs at a certain concentration of HCl solutions, at the same time Al of CuCrNiAl alloy is subject to corrosion also. The dechromisation corrosion occurs initially at the interface between Cr phase and Cu phase, then it gradually extends Cr phase until Cr phase is dissolved completely. It is also revealed that the tendency of dechromisaion of the CuCrNiAl alloy increases with the increase in concentration and temperature of HCl solutions.
文摘The effect of rare earth elements on eutectic carbide′s morphology of low chromium semi steel in as cast state and after heat treatment was investigated, and accordingly, the thermal fatigue property of this material was studied. The results show that RE can improve the eutectic carbide′s morphology, inhibit the formation and propagation of thermal fatigue cracks, therefore, promote the thermal fatigue property, which is more noticeable in case of the RE modification in combination with heat treatment. The optimal thermal fatigue property can be obtained when treated with 0.2% RE modification as well as normalization at 950 ℃ for 3 h.
文摘The effect of rare earth elements on dynamics of thermal fatigue crack′s propagation in low alloy white cast iron was studied. The results show that the generation and growth of the thermal fatigue crack can be restrained and the activation energy for the crack′s propagation can be increased by adding a certain amount of RE, and especially, the restraint for the thermal fatigue crack′s propagation is more evident under the combined action of RE and heat treatment at high working temperatures, which can be attributed to the segregation of RE to interfaces, the participation of granular carbides and the change of eutectic carbide morphology.
