In this research, the dynamic recrystallization （DRX） behavior of an as-cast precipitation hardenable （PH） stainless steel was investigated by conducting hot compression tests at temperatures between 950-1150℃ an...In this research, the dynamic recrystallization （DRX） behavior of an as-cast precipitation hardenable （PH） stainless steel was investigated by conducting hot compression tests at temperatures between 950-1150℃ and under strain rates of 0.001-1 s^-1. The flow stress curves show that the DRX is responsible for flow softening during hot compression. The effects of temperature and strain rate on the strain and stress corresponding to peak point （εp and σp） of flow curve were analyzed individually. It is realized that, they increase with strain rate and decrease with temperature. The relationship between Zener-Hollomon parameter （Z） and εp was investigated and the equation of εp=4.3×10^-4^0.14 was proposed. The strain for the maximum rate of DRX （εmax） was determined under different deformation conditions. Therefore, it is realized that it increases with Z parameter and vise versa. On the basis of obtained results, the equation of εmax=9.5 × 10^-4Z0.12 was proposed.展开更多
The inhibition efficiency of 1,4-bis （2-nitrobenzylidene） thiosemicarbazide （BBTS） on the corrosion of mild steel in 1 mol/L HCI was investigated by potentiodynamic polarization and electrochemical impedance metho...The inhibition efficiency of 1,4-bis （2-nitrobenzylidene） thiosemicarbazide （BBTS） on the corrosion of mild steel in 1 mol/L HCI was investigated by potentiodynamic polarization and electrochemical impedance methods. Inhibition efficiency （IE）, corrosion rate and surface coverage were evaluated at different concentrations of BBTS. The results of the investigation showed that this compound had good inhibiting properties for mild steel corrosion in hydrochloric acid and BBTS was a mixed-type inhibitor. BBTS chemisorbed at the electrode surface obeyed Langmuir adsorption isotherm and formed a stable surface complex on the mild steel surface. The synergistic effect of halide ion in acid solution suggested a co-adsorption of BBTS inhibitor by the adsorbed iodide ion.展开更多
Castor oil is used to synthesize phenolic resin modified polyol. Castor oil, phenolic resin were taken in the molar ratio 0.07：0.027 and diethylene glycol （DEG） was also taken in varying hydroxyl numbers to achieve...Castor oil is used to synthesize phenolic resin modified polyol. Castor oil, phenolic resin were taken in the molar ratio 0.07：0.027 and diethylene glycol （DEG） was also taken in varying hydroxyl numbers to achieve chemical modification in the backbone of synthesized polyol. Physico-chemical properties like acid value, OH value and moisture content of the modified polyol were measured. The prepared phenolic resin blended polyol were reacted with 4, 4-methylene diisocyanate and 2, 4-toluene diisocyanate to formulate the two component polyurethane （PU） coatings. Prepared coating is used to study properties such as gel time, surface dry, tack free and hard surface drying times. It was found that phenolic resin and diethyleneglycol used in synthesizing castor oil based modified polyols show the significant changes in physico-chemical properties of synthesized polyols. The variation in physico-chemical properties of synthesized polyol provide the information for desirable curing of polyurethane systems.展开更多
文摘In this research, the dynamic recrystallization （DRX） behavior of an as-cast precipitation hardenable （PH） stainless steel was investigated by conducting hot compression tests at temperatures between 950-1150℃ and under strain rates of 0.001-1 s^-1. The flow stress curves show that the DRX is responsible for flow softening during hot compression. The effects of temperature and strain rate on the strain and stress corresponding to peak point （εp and σp） of flow curve were analyzed individually. It is realized that, they increase with strain rate and decrease with temperature. The relationship between Zener-Hollomon parameter （Z） and εp was investigated and the equation of εp=4.3×10^-4^0.14 was proposed. The strain for the maximum rate of DRX （εmax） was determined under different deformation conditions. Therefore, it is realized that it increases with Z parameter and vise versa. On the basis of obtained results, the equation of εmax=9.5 × 10^-4Z0.12 was proposed.
基金University Grants Commission (UGC)New Delhi for providing the research fund to carry out this work
文摘The inhibition efficiency of 1,4-bis （2-nitrobenzylidene） thiosemicarbazide （BBTS） on the corrosion of mild steel in 1 mol/L HCI was investigated by potentiodynamic polarization and electrochemical impedance methods. Inhibition efficiency （IE）, corrosion rate and surface coverage were evaluated at different concentrations of BBTS. The results of the investigation showed that this compound had good inhibiting properties for mild steel corrosion in hydrochloric acid and BBTS was a mixed-type inhibitor. BBTS chemisorbed at the electrode surface obeyed Langmuir adsorption isotherm and formed a stable surface complex on the mild steel surface. The synergistic effect of halide ion in acid solution suggested a co-adsorption of BBTS inhibitor by the adsorbed iodide ion.
文摘Castor oil is used to synthesize phenolic resin modified polyol. Castor oil, phenolic resin were taken in the molar ratio 0.07：0.027 and diethylene glycol （DEG） was also taken in varying hydroxyl numbers to achieve chemical modification in the backbone of synthesized polyol. Physico-chemical properties like acid value, OH value and moisture content of the modified polyol were measured. The prepared phenolic resin blended polyol were reacted with 4, 4-methylene diisocyanate and 2, 4-toluene diisocyanate to formulate the two component polyurethane （PU） coatings. Prepared coating is used to study properties such as gel time, surface dry, tack free and hard surface drying times. It was found that phenolic resin and diethyleneglycol used in synthesizing castor oil based modified polyols show the significant changes in physico-chemical properties of synthesized polyols. The variation in physico-chemical properties of synthesized polyol provide the information for desirable curing of polyurethane systems.
