This study introduces a novel method for reconstructing the 3D model of aluminum foam using cross-sectional sequence images.Combining precision milling and image acquisition,high-qual-ity cross-sectional images are ob...This study introduces a novel method for reconstructing the 3D model of aluminum foam using cross-sectional sequence images.Combining precision milling and image acquisition,high-qual-ity cross-sectional images are obtained.Pore structures are segmented by the U-shaped network(U-Net)neural network integrated with the Canny edge detection operator,ensuring accurate pore delineation and edge extraction.The trained U-Net achieves 98.55%accuracy.The 2D data are superimposed and processed into 3D point clouds,enabling reconstruction of the pore structure and aluminum skeleton.Analysis of pore 01 shows the cross-sectional area initially increases,and then decreases with milling depth,with a uniform point distribution of 40 per layer.The reconstructed model exhibits a porosity of 77.5%,with section overlap rates between the 2D pore segmentation and the reconstructed model exceeding 96%,confirming high fidelity.Equivalent sphere diameters decrease with size,averaging 1.95 mm.Compression simulations reveal that the stress-strain curve of the 3D reconstruction model of aluminum foam exhibits fluctuations,and the stresses in the reconstruction model concentrate on thin cell walls,leading to localized deformations.This method accurately restores the aluminum foam’s complex internal structure,improving reconstruction preci-sion and simulation reliability.The approach offers a cost-efficient,high-precision technique for optimizing material performance in engineering applications.展开更多
In this review, we highlight some recent methodological and theoretical develop- ments in estimation and testing of large panel data models with cross-sectional dependence. The paper begins with a discussion of issues...In this review, we highlight some recent methodological and theoretical develop- ments in estimation and testing of large panel data models with cross-sectional dependence. The paper begins with a discussion of issues of cross-sectional dependence, and introduces the concepts of weak and strong cross-sectional dependence. Then, the main attention is primarily paid to spatial and factor approaches for modeling cross-sectional dependence for both linear and nonlinear （nonparametric and semiparametric） panel data models. Finally, we conclude with some speculations on future research directions.展开更多
An orthogonal 2D training image is constructed from the geological analysis results of well logs and sedimentary facies;the 2 D probabilities in three directions are obtained through linear pooling method and then agg...An orthogonal 2D training image is constructed from the geological analysis results of well logs and sedimentary facies;the 2 D probabilities in three directions are obtained through linear pooling method and then aggregated by the logarithmic linear pooling to determine the 3 D multi-point pattern probabilities at the unknown points,to realize the reconstruction of a 3 D model from 2D cross-section.To solve the problems of reducing pattern variability in the 2 D training image and increasing sampling uncertainty,an adaptive spatial sampling method is introduced,and an iterative simulation strategy is adopted,in which sample points from the region with higher reliability of the previous simulation results are extracted to be additional condition points in the following simulation to improve the pattern probability sampling stability.The comparison of lateral accretion layer conceptual models shows that the reconstructing algorithm using self-adaptive spatial sampling can improve the accuracy of pattern sampling and rationality of spatial structure characteristics,and accurately reflect the morphology and distribution pattern of the lateral accretion layer.Application of the method in reconstructing the meandering river reservoir of the Cretaceous McMurray Formation in Canada shows that the new method can accurately reproduce the shape,spatial distribution pattern and development features of complex lateral accretion layers in the meandering river reservoir under tide effect.The test by sparse wells shows that the simulation accuracy is above 85%,and the coincidence rate of interpretation and prediction results of newly drilled horizontal wells is up to 80%.展开更多
In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular m...In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular model uses arcs and tangent lines as the yarn flexion shape and selects the circle as the yarn cross-section. Then, a new elliptical cross-section mathematical model is rapidly built by the Jaeobian transformation of the circular model. The Matiab software is used for the 3D simulation. It is shown that 3D simulations of woven fabrics with different weft and warp yarn counts, weft and warp densities, structure phases, weaves and flattening coefficients are successfully realized by Matiab basing on the elliptical mathematical model.展开更多
Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reac...Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reaction cross-section of long-lived fission products based on a tensor model.This tensor model is an extension of the collaborative filtering algorithm used for nuclear data.It is based on tensor decomposition and completion to predict(n,2n)reaction cross-sections;the corresponding EXFOR data are applied as training data.The reliability of the proposed tensor model was validated by comparing the calculations with data from EXFOR and different databases.Predictions were made for long-lived fission products such as^(60)Co,^(79)Se,^(93)Zr,^(107)P,^(126)Sn,and^(137)Cs,which provide a predicted energy range to effectively transmute long-lived fission products into shorter-lived or less radioactive isotopes.This method could be a powerful tool for completing(n,2n)reaction cross-sectional data and shows the possibility of selective transmutation of nuclear waste.展开更多
This paper extends and generalizes the works of [1,2] to allow for cross-sectional dependence in the context of a two-way error components model and consequently develops LM test. The cross-sectional dependence follow...This paper extends and generalizes the works of [1,2] to allow for cross-sectional dependence in the context of a two-way error components model and consequently develops LM test. The cross-sectional dependence follows the first order spatial autoregressive error (SAE) process and is imposed on the remainder disturbances. It is important to note that this paper does not consider alternative forms of spatial lag dependence other than SAE. It also does not allow for endogeneity of the regressors and requires the normality assumption to derive the LM test.展开更多
We demonstrate a possibility of computation of inelastic scattering cross-section in a multi-peripheral model by application of the Laplace method to multidimensional integral over the domain of physical process. Foun...We demonstrate a possibility of computation of inelastic scattering cross-section in a multi-peripheral model by application of the Laplace method to multidimensional integral over the domain of physical process. Founded the constrained maximum point of scattering cross-section integral under condition of the energy-momentum conservation. The integrand is substituted for an expression of Gaussian type in the neighborhood of this point. It made possible to compute this integral numerically. The paper has two parts. The hunting procedure of the constrained maximum point is considered and the properties of this maximum point are discussed in the given part of the paper. It is shown that virtuality of all internal lines of the “comb” diagram reduced at the constrained maximum point with energy growth. In the second part of the paper we give some the arguments in favor of consideration of the mechanism of virtuality reduction as the mechanism of the total hadron scattering cross-section growth, which is not taken into account within the framework of Regge theory.展开更多
We demonstrate a new technique for calculating proton-proton inelastic cross-section, which allows one by application of the Laplace' method replace the integrand in the integral for the scattering amplitude in th...We demonstrate a new technique for calculating proton-proton inelastic cross-section, which allows one by application of the Laplace' method replace the integrand in the integral for the scattering amplitude in the vicinity of the maximum point by expression of Gaussian type. This, in turn, allows us to overcome the computational difficulties for the calculation of the integrals expressing the cross section to sufficiently large numbers of particles. We have managed to overcome these problems in calculating the proton-proton inelastic cross-section for production (n ≤ 8) number of secondary particles in within the framework of φ3 model. As the result the obtained dependence of inelastic cross-section and total scattering cross-section on the energy √s are qualitative agrees with the experimental data. Such description of total cross-section behavior differs considerably from existing now description, where reggeons exchange with the intercept greater than unity is considered.展开更多
We develop a new method for taking into account the interference contributions to proton-proton inelastic cross-section within the framework of the simplest multi-peripheral model based on the self-interacting scalar ...We develop a new method for taking into account the interference contributions to proton-proton inelastic cross-section within the framework of the simplest multi-peripheral model based on the self-interacting scalar φ3 field theory, using Laplace’s method for calculation of each interference contribution. We do not know any works that adopted the inter- ference contributions for inelastic processes. This is due to the generally adopted assumption that the main contribution to the integrals expressing the cross section makes multi-Regge domains with its characteristic strong ordering of secon- dary particles by rapidity. However, in this work, we find what kind of space domains makes a major contribution to the integral and these space domains are not multi-Regge. We demonstrated that because these interference contributions are significant, so they cannot be limited by a small part of them. With the help of the approximate replacement the sum of a huge number of these contributions by the integral were calculated partial cross sections for such numbers of secondary particles for which direct calculation would be impossible. The offered model qualitative agrees with experimental dependence of total scattering cross-section on energy with a characteristic minimum in the range ≈ 10 GeV. However, quantitative agreement was not achieved;we assume that due to the fact that we have examined the simplest diagrams of theory.展开更多
Preforming process would change yarn angle and yarn orientation,its influence on the material properties and material orientations needs to be considered in the performance analysis.However,most current performance mo...Preforming process would change yarn angle and yarn orientation,its influence on the material properties and material orientations needs to be considered in the performance analysis.However,most current performance models fail to account for the preforming effect.An integrated performance model accounting for the impact of preforming has been developed.In this integrated model,part geometry,yarn angle and orientation after preforming of multiple prepreg layers are predicted by Finite Element Analysis(FEA)using a non-orthogonal constitutive law.Experiments were conducted to validate the preforming simulation for a single dome composites structure made by two prepreg layers with different initial fiber orientations.Performance analysis until failure was then conducted for the single dome structure to validate the integrated performance model.Comparison between simulation and experiment shows that not only the failure mode and failure zone,but also the force-displacement curve during compression process are captured correctly by the performance model,demonstrating the effectiveness of the newly proposed model in accounting for the impact of preforming process.展开更多
Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. S...Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. So theoretical analysis, numerical simulation and experimental data are combined to analyze the influence of variable cross-section characteristic on the time history of crater radius. Moreover the relationships between time history of crater radius (as well as mass of BAD) and the thickness of RHA (from 30mm to 70 mm) and the impact velocity of EFP (1650 m/s to 1860 m/s) are also investigated. The results indicate that: 1) being compared to the variable cross-section characteristic is ignored, the theoretical time history of crater radius is in better agreement with the simulation results when the variable cross-section characteristic is considered;2) being compared to the other three conditions of plug, the theoretical mass of BAD is in the best agreement with the simulation results when the shape of plug is frustum of a cone and the angle between generatrix and bottom is 45- and the axial length of mushroom is considered.展开更多
To understand the non-equilibrium morphological adjustment of a river in response to environmental changes,it is essential to(i)accurately identify how past conditions of water and sediment have impacted current morph...To understand the non-equilibrium morphological adjustment of a river in response to environmental changes,it is essential to(i)accurately identify how past conditions of water and sediment have impacted current morphological adjustment of the river,and(ii)establish a corresponding simulation for non-equilibrium conditions.Based on discharge and suspended sediment concentration(SSC)as well as 82 cross-sectional data items for the Huayuankou-Lijin reach of the Lower Yellow River in the period 1965-2015,the process of adjustment of the geometry of the main channel(area,width,depth,and geomorphic coefficient),and its responses to changes in discharge and SSC for different reaches are statistically analyzed.Following this,a delayed response model(DRM)of the geometry of the main channel subjected to variations in discharge and SSC is established using a multi-step analytical model,with the discharge and SSC as the main controlling factors.The results show that the area,width,and depth of the main channel decreased initially,then increased,decreased again,and finally increased again.These features of the geometry of the channel were positively correlated with the 4-year moving average discharge and negatively with the 4-year moving average SSC.The geomorphic coefficient for the Huayuankou-Sunkou reach exhibited a trend of decrease,whereas that of the Sunkou-Lijin reach decreased initially,then increased,decreased again,and finally increased again.Except for the Huayuankou-Gaocun reach in 1965-1999,the coefficient was negatively correlated with the 4-year moving average discharge and positively with SSC.The simulated values of the morphological parameters of the main channel for all sub-reaches obtained using the DRM agreed well with the measured values.This indicates that the DRM can be used to simulate the process of response of the cross-sectional geometry of the main channel to variations in the water and sediment.The results of the model show that the adjustment of the geometry of the main channel was affected by the discharge and the SSC at present(30%)as well as for the previous 7 years(70%).The proposed model offers insights into the mechanism whereby past water and sediment influence the current morphological adjustment of the river,and provides an effective method for predicting the magnitude and trend of the geometry of the main channel under different flow conditions.展开更多
The phenomenon of a material failure varies with its gauge length in use. In the present study, the breaking strengths of J30/C70 and J55/C45 blended yarns spun by the ring spinning technology were investigated with ...The phenomenon of a material failure varies with its gauge length in use. In the present study, the breaking strengths of J30/C70 and J55/C45 blended yarns spun by the ring spinning technology were investigated with the employment of the equations derived from the Weibull theory. The four probability estimators of the Weibull distribution were also evaluated. The results showed that the estimator （2a） was acceptable for calculating the Weibull modulus of the jute/cotton blended yarns. With the exception of breaking strength of the J30/C70 at the gauge length of 200 ram, the breaking strengths of both blended yarn could be predicted accurately by the Eqs. （9） or （10） in this paper.展开更多
Through the development of marine energy,marine cables are the key equipment for transmission of electrical energy between surface platforms and underwater facilities.Fatigue failure is a critical failure mode of mari...Through the development of marine energy,marine cables are the key equipment for transmission of electrical energy between surface platforms and underwater facilities.Fatigue failure is a critical failure mode of marine cables.The bending performance of the cable conductor has a major influence on both bending and fatigue performances of the overall cable structure.To study the influence of different types of the conductor cross-section on the bending performances of marine cable conductors,three types of copper conductors with the same cross-sectional area,i.e.,noncompressed round,compressed round,and shaped wire conductors,were selected.The experimental results demonstrated that the cross-section type significantly affects the bending performances of copper conductors.In particular,the bending stiffness of the shaped wire conductor is the highest among the three conductor types.Four key evaluation parameters,i.e.,the bending stiffness,maximum bending moment,envelope area,and engineering critical slip point,were selected to compare and analyze the bending hysteresis curves of the three copper conductors.The differences in the key evaluation parameters were analyzed based on the structural dimensional parameters,processing methods,and classical bending stiffness theoretical models of the three copper conductor types.The results provide an important theoretical guidance for the structural design and engineering applications of marine cable conductors.展开更多
The tensile properties of a series of soybean protein yarns are tested in USTER THINKPAID Ⅲ. A nonlinear viscoelastic model has been proposed to describe the tensile behavior of soybean protein yarns. The model is co...The tensile properties of a series of soybean protein yarns are tested in USTER THINKPAID Ⅲ. A nonlinear viscoelastic model has been proposed to describe the tensile behavior of soybean protein yarns. The model is composed of a Maxwell element, a linear spring and a nonlinear spring. The tensile properties of soybean protein yam are analyzed. The stress-strain curves of the yams are fitted. The average breaking tenacity and specific work of rupture are calculated using the average breaking strain. Comparisons indicate that theoretical predictions conform the experimental results very well.展开更多
Water transport through the pore structure of the knitted fabric can occur only in place where the fiber-water surface attraction force is greater than the water weight in the capillary. To investigate wet permeabilit...Water transport through the pore structure of the knitted fabric can occur only in place where the fiber-water surface attraction force is greater than the water weight in the capillary. To investigate wet permeability of the knitted yarn in the fabric, a liquid transport model is established. The main factors which have significant influences on the liquid transport have been analyzed. It is derived from the argument that the optimal design for the knitted fabric with quick sweat transport property can be obtained.展开更多
In this paper,the vector equation of a generaliseddoubly wound helix was derived.Treloar’s pliedyarn geometry could be obtained as a special case ofthe generalised doubly wound helix.The shortest fi-bre length around...In this paper,the vector equation of a generaliseddoubly wound helix was derived.Treloar’s pliedyarn geometry could be obtained as a special case ofthe generalised doubly wound helix.The shortest fi-bre length around the surface of a helical tube(formed by fibre helices)was determined by apply-ing variational principles.The fibre length as calcu-lated by using Treloar’s geometry was compared in-directly with the shortest possible fibre length at dif-ferent levels of yarn deformation when some of Tre-loar’s rigid geometrical constraints were relaxed.Anew idea based on non-concentric circles was intro-duced to approximate the fibre helix movement in atwo-ply yarn.A torsional model of two-ply yarnwas developed and the theoretical predictions werecompared with some preliminary experimental re-sults.展开更多
Rolling process plays an important role in the manufacture of Bi-based high temperature superconductor tapes, and the plastic flow regularities of the superconducting wires during deformation will directly affect the ...Rolling process plays an important role in the manufacture of Bi-based high temperature superconductor tapes, and the plastic flow regularities of the superconducting wires during deformation will directly affect the ultimate quality of the tapes. In order to investigate the effect of cross-sectional shapes before fiat rolling on the performance and homogeneity of the tapes, some numerical models of Bi-2223/Ag wires with different cross-sectional shapes including circular, square, elliptical and racetrack cross-sections are constructed during the rolling process. By comparing the relative density, logarithmic strain ratio and length-width ratio on the filaments, it is revealed that Bi-2223/Ag wire with special-shaped cross-section can achieve better conductivity than the round wire, in particular, the racetrack cross-sectional wire has the second best performance among four wires. Based on material processability and experimental condition, tri-pass racetrack drawing technique is employed to optimize the process and obtain racetrack cross-sectional wire. The rolling process of Bi-2223/Ag wire with racetrack cross-section causes more intensive deformation of filaments in the center of the tape and achieves the filaments with larger length-width ratio. Also, the deformation distribution of filaments verifies the numerical results. Consequently, the racetrack drawing technique can be utilized for a reference during the mechanical processing and to increase the current transmission capacities of Bi-2223/Ag tapes.展开更多
Modeling the 3D geometric configuration of yarn is the base of building the 3D fabric structure. The surfaces of the yarns are modeled by many facets. To improve the efficiency of modeling, 3D yarn is usually designed...Modeling the 3D geometric configuration of yarn is the base of building the 3D fabric structure. The surfaces of the yarns are modeled by many facets. To improve the efficiency of modeling, 3D yarn is usually designed by Bezier curve, spline curve or B-spline curve on the principle of Computer Graphics. The paper reviews different 3D modeling methods for single yarn from the view of cross-section and central line. Some improvements for a better visual effect such as inserting twist and hairiness are illustrated as well. Based on the single yarn, the folded yarn and some fancy yarns can also be modeled in 3D space as long as the cross-sections of the control sections of the component single yarn are determined. Applications of the various 3D yarns are demonstrated. The advantages and the drawbacks of various methods are explained and compared as well. Comparatively speaking, modeling technology based on spline curve is more convenient and flexible, perhaps it is the most popular tool since it is capable of designing different kinds of yarns mentioned above and gets the maximum support from the different developing platforms such as OpenGL, 3DS-MAX, Solid Works CAD, etc.展开更多
In this paper, a dynamic fault model is proposed to predict yarn end breakage in the spinning procedure through investigation of fault characteristics. In view of the principle that uniformity bad in raw material caus...In this paper, a dynamic fault model is proposed to predict yarn end breakage in the spinning procedure through investigation of fault characteristics. In view of the principle that uniformity bad in raw material causes iustable yarn formation, the investigation focuses on the fault characteristic existing in the dynamic tension. Analyzing the dynamic spinning system, the phenomenon of over random shock in a spinning triangle is discovered to be the main physical event prior to yarn end breakage. The fault characteristic is further confirmed by dynamic tests and signal processing, and can be used to make an approach to predicting yarn end breakage. A relative energy feature is defined for evaluating the tendency of yarn end breakage, and its effectiveness is verified by on.line monitoring tests in the laboratory. The research results show that the proposed dynamic fault model has not only an advantage in indicating the presence of fault characteristics, but also great potentials in quantitating fault in online spinning monitoring.展开更多
基金supported by the Key Research and DevelopmentPlan in Shanxi Province of China(No.201803D421045)the Natural Science Foundation of Shanxi Province(No.2021-0302-123104)。
文摘This study introduces a novel method for reconstructing the 3D model of aluminum foam using cross-sectional sequence images.Combining precision milling and image acquisition,high-qual-ity cross-sectional images are obtained.Pore structures are segmented by the U-shaped network(U-Net)neural network integrated with the Canny edge detection operator,ensuring accurate pore delineation and edge extraction.The trained U-Net achieves 98.55%accuracy.The 2D data are superimposed and processed into 3D point clouds,enabling reconstruction of the pore structure and aluminum skeleton.Analysis of pore 01 shows the cross-sectional area initially increases,and then decreases with milling depth,with a uniform point distribution of 40 per layer.The reconstructed model exhibits a porosity of 77.5%,with section overlap rates between the 2D pore segmentation and the reconstructed model exceeding 96%,confirming high fidelity.Equivalent sphere diameters decrease with size,averaging 1.95 mm.Compression simulations reveal that the stress-strain curve of the 3D reconstruction model of aluminum foam exhibits fluctuations,and the stresses in the reconstruction model concentrate on thin cell walls,leading to localized deformations.This method accurately restores the aluminum foam’s complex internal structure,improving reconstruction preci-sion and simulation reliability.The approach offers a cost-efficient,high-precision technique for optimizing material performance in engineering applications.
基金Supported by the National Natural Science Foundation of China(71131008(Key Project)and 71271179)
文摘In this review, we highlight some recent methodological and theoretical develop- ments in estimation and testing of large panel data models with cross-sectional dependence. The paper begins with a discussion of issues of cross-sectional dependence, and introduces the concepts of weak and strong cross-sectional dependence. Then, the main attention is primarily paid to spatial and factor approaches for modeling cross-sectional dependence for both linear and nonlinear （nonparametric and semiparametric） panel data models. Finally, we conclude with some speculations on future research directions.
基金Supported by the China National Science and Technology Major Project(2017ZX05005-004-002,2016ZX05031-002-001)National Natural Science Foundation of China(41872138)Open Foundation of Top Disciplines in Yangtze University(2019KFJJ0818029)。
文摘An orthogonal 2D training image is constructed from the geological analysis results of well logs and sedimentary facies;the 2 D probabilities in three directions are obtained through linear pooling method and then aggregated by the logarithmic linear pooling to determine the 3 D multi-point pattern probabilities at the unknown points,to realize the reconstruction of a 3 D model from 2D cross-section.To solve the problems of reducing pattern variability in the 2 D training image and increasing sampling uncertainty,an adaptive spatial sampling method is introduced,and an iterative simulation strategy is adopted,in which sample points from the region with higher reliability of the previous simulation results are extracted to be additional condition points in the following simulation to improve the pattern probability sampling stability.The comparison of lateral accretion layer conceptual models shows that the reconstructing algorithm using self-adaptive spatial sampling can improve the accuracy of pattern sampling and rationality of spatial structure characteristics,and accurately reflect the morphology and distribution pattern of the lateral accretion layer.Application of the method in reconstructing the meandering river reservoir of the Cretaceous McMurray Formation in Canada shows that the new method can accurately reproduce the shape,spatial distribution pattern and development features of complex lateral accretion layers in the meandering river reservoir under tide effect.The test by sparse wells shows that the simulation accuracy is above 85%,and the coincidence rate of interpretation and prediction results of newly drilled horizontal wells is up to 80%.
文摘In order to give a true reflection of the spatial structure of woven fabric, a circular mathematical model is established based on the Peirce＇s model and the principle of the coordinate transformation. The circular model uses arcs and tangent lines as the yarn flexion shape and selects the circle as the yarn cross-section. Then, a new elliptical cross-section mathematical model is rapidly built by the Jaeobian transformation of the circular model. The Matiab software is used for the 3D simulation. It is shown that 3D simulations of woven fabrics with different weft and warp yarn counts, weft and warp densities, structure phases, weaves and flattening coefficients are successfully realized by Matiab basing on the elliptical mathematical model.
基金supported by the Key Laboratory of Nuclear Data foundation(No.JCKY2022201C157)。
文摘Interest has recently emerged in potential applications of(n,2n)reactions of unstable nuclei.Challenges have arisen because of the scarcity of experimental cross-sectional data.This study aims to predict the(n,2n)reaction cross-section of long-lived fission products based on a tensor model.This tensor model is an extension of the collaborative filtering algorithm used for nuclear data.It is based on tensor decomposition and completion to predict(n,2n)reaction cross-sections;the corresponding EXFOR data are applied as training data.The reliability of the proposed tensor model was validated by comparing the calculations with data from EXFOR and different databases.Predictions were made for long-lived fission products such as^(60)Co,^(79)Se,^(93)Zr,^(107)P,^(126)Sn,and^(137)Cs,which provide a predicted energy range to effectively transmute long-lived fission products into shorter-lived or less radioactive isotopes.This method could be a powerful tool for completing(n,2n)reaction cross-sectional data and shows the possibility of selective transmutation of nuclear waste.
文摘This paper extends and generalizes the works of [1,2] to allow for cross-sectional dependence in the context of a two-way error components model and consequently develops LM test. The cross-sectional dependence follows the first order spatial autoregressive error (SAE) process and is imposed on the remainder disturbances. It is important to note that this paper does not consider alternative forms of spatial lag dependence other than SAE. It also does not allow for endogeneity of the regressors and requires the normality assumption to derive the LM test.
文摘We demonstrate a possibility of computation of inelastic scattering cross-section in a multi-peripheral model by application of the Laplace method to multidimensional integral over the domain of physical process. Founded the constrained maximum point of scattering cross-section integral under condition of the energy-momentum conservation. The integrand is substituted for an expression of Gaussian type in the neighborhood of this point. It made possible to compute this integral numerically. The paper has two parts. The hunting procedure of the constrained maximum point is considered and the properties of this maximum point are discussed in the given part of the paper. It is shown that virtuality of all internal lines of the “comb” diagram reduced at the constrained maximum point with energy growth. In the second part of the paper we give some the arguments in favor of consideration of the mechanism of virtuality reduction as the mechanism of the total hadron scattering cross-section growth, which is not taken into account within the framework of Regge theory.
文摘We demonstrate a new technique for calculating proton-proton inelastic cross-section, which allows one by application of the Laplace' method replace the integrand in the integral for the scattering amplitude in the vicinity of the maximum point by expression of Gaussian type. This, in turn, allows us to overcome the computational difficulties for the calculation of the integrals expressing the cross section to sufficiently large numbers of particles. We have managed to overcome these problems in calculating the proton-proton inelastic cross-section for production (n ≤ 8) number of secondary particles in within the framework of φ3 model. As the result the obtained dependence of inelastic cross-section and total scattering cross-section on the energy √s are qualitative agrees with the experimental data. Such description of total cross-section behavior differs considerably from existing now description, where reggeons exchange with the intercept greater than unity is considered.
文摘We develop a new method for taking into account the interference contributions to proton-proton inelastic cross-section within the framework of the simplest multi-peripheral model based on the self-interacting scalar φ3 field theory, using Laplace’s method for calculation of each interference contribution. We do not know any works that adopted the inter- ference contributions for inelastic processes. This is due to the generally adopted assumption that the main contribution to the integrals expressing the cross section makes multi-Regge domains with its characteristic strong ordering of secon- dary particles by rapidity. However, in this work, we find what kind of space domains makes a major contribution to the integral and these space domains are not multi-Regge. We demonstrated that because these interference contributions are significant, so they cannot be limited by a small part of them. With the help of the approximate replacement the sum of a huge number of these contributions by the integral were calculated partial cross sections for such numbers of secondary particles for which direct calculation would be impossible. The offered model qualitative agrees with experimental dependence of total scattering cross-section on energy with a characteristic minimum in the range ≈ 10 GeV. However, quantitative agreement was not achieved;we assume that due to the fact that we have examined the simplest diagrams of theory.
基金the financial support from the Young Fund of Natural Science Foundation of Shaanxi Province,China(Nos.2020JQ-121 and 2020JQ-701)the Direct Grant for Research,China(No.4055130)from the Chinese University of Hong Kong,China。
文摘Preforming process would change yarn angle and yarn orientation,its influence on the material properties and material orientations needs to be considered in the performance analysis.However,most current performance models fail to account for the preforming effect.An integrated performance model accounting for the impact of preforming has been developed.In this integrated model,part geometry,yarn angle and orientation after preforming of multiple prepreg layers are predicted by Finite Element Analysis(FEA)using a non-orthogonal constitutive law.Experiments were conducted to validate the preforming simulation for a single dome composites structure made by two prepreg layers with different initial fiber orientations.Performance analysis until failure was then conducted for the single dome structure to validate the integrated performance model.Comparison between simulation and experiment shows that not only the failure mode and failure zone,but also the force-displacement curve during compression process are captured correctly by the performance model,demonstrating the effectiveness of the newly proposed model in accounting for the impact of preforming process.
基金financially supported by the National Natural Science Foundation of China(Grant No.11372136)
文摘Analyzing the mass of behind-armor debris (BAD) generated by Rolled Homogeneous Armor (RHA) subjected to normal penetration of variable cross-section Explosively Formed Projectile (EFP) is the purpose of this paper. So theoretical analysis, numerical simulation and experimental data are combined to analyze the influence of variable cross-section characteristic on the time history of crater radius. Moreover the relationships between time history of crater radius (as well as mass of BAD) and the thickness of RHA (from 30mm to 70 mm) and the impact velocity of EFP (1650 m/s to 1860 m/s) are also investigated. The results indicate that: 1) being compared to the variable cross-section characteristic is ignored, the theoretical time history of crater radius is in better agreement with the simulation results when the variable cross-section characteristic is considered;2) being compared to the other three conditions of plug, the theoretical mass of BAD is in the best agreement with the simulation results when the shape of plug is frustum of a cone and the angle between generatrix and bottom is 45- and the axial length of mushroom is considered.
基金Key Program of National Natural Science Foundation of China,No.51639005Central Public-interest Scientific Institution Basal Research Fund of China,No.CKSF2019214/HL,No.CKSF2019411/HL。
文摘To understand the non-equilibrium morphological adjustment of a river in response to environmental changes,it is essential to(i)accurately identify how past conditions of water and sediment have impacted current morphological adjustment of the river,and(ii)establish a corresponding simulation for non-equilibrium conditions.Based on discharge and suspended sediment concentration(SSC)as well as 82 cross-sectional data items for the Huayuankou-Lijin reach of the Lower Yellow River in the period 1965-2015,the process of adjustment of the geometry of the main channel(area,width,depth,and geomorphic coefficient),and its responses to changes in discharge and SSC for different reaches are statistically analyzed.Following this,a delayed response model(DRM)of the geometry of the main channel subjected to variations in discharge and SSC is established using a multi-step analytical model,with the discharge and SSC as the main controlling factors.The results show that the area,width,and depth of the main channel decreased initially,then increased,decreased again,and finally increased again.These features of the geometry of the channel were positively correlated with the 4-year moving average discharge and negatively with the 4-year moving average SSC.The geomorphic coefficient for the Huayuankou-Sunkou reach exhibited a trend of decrease,whereas that of the Sunkou-Lijin reach decreased initially,then increased,decreased again,and finally increased again.Except for the Huayuankou-Gaocun reach in 1965-1999,the coefficient was negatively correlated with the 4-year moving average discharge and positively with SSC.The simulated values of the morphological parameters of the main channel for all sub-reaches obtained using the DRM agreed well with the measured values.This indicates that the DRM can be used to simulate the process of response of the cross-sectional geometry of the main channel to variations in the water and sediment.The results of the model show that the adjustment of the geometry of the main channel was affected by the discharge and the SSC at present(30%)as well as for the previous 7 years(70%).The proposed model offers insights into the mechanism whereby past water and sediment influence the current morphological adjustment of the river,and provides an effective method for predicting the magnitude and trend of the geometry of the main channel under different flow conditions.
基金National Key Technologies R&D Programof China (No.2007BAE41B01)
文摘The phenomenon of a material failure varies with its gauge length in use. In the present study, the breaking strengths of J30/C70 and J55/C45 blended yarns spun by the ring spinning technology were investigated with the employment of the equations derived from the Weibull theory. The four probability estimators of the Weibull distribution were also evaluated. The results showed that the estimator （2a） was acceptable for calculating the Weibull modulus of the jute/cotton blended yarns. With the exception of breaking strength of the J30/C70 at the gauge length of 200 ram, the breaking strengths of both blended yarn could be predicted accurately by the Eqs. （9） or （10） in this paper.
基金financially supported by the National Natural Science Foundation of China(Grant No.U1906233)the Key R&D Program of Shandong Province(Grant No.2019JZZY010801)+1 种基金the Development Projects in Key Areas of Guangdong Province(Grant No.2020B1111040002)the Fundamental Research Funds for the Central Universities(Grant Nos.DUT20ZD213 and DUT20LAB308)。
文摘Through the development of marine energy,marine cables are the key equipment for transmission of electrical energy between surface platforms and underwater facilities.Fatigue failure is a critical failure mode of marine cables.The bending performance of the cable conductor has a major influence on both bending and fatigue performances of the overall cable structure.To study the influence of different types of the conductor cross-section on the bending performances of marine cable conductors,three types of copper conductors with the same cross-sectional area,i.e.,noncompressed round,compressed round,and shaped wire conductors,were selected.The experimental results demonstrated that the cross-section type significantly affects the bending performances of copper conductors.In particular,the bending stiffness of the shaped wire conductor is the highest among the three conductor types.Four key evaluation parameters,i.e.,the bending stiffness,maximum bending moment,envelope area,and engineering critical slip point,were selected to compare and analyze the bending hysteresis curves of the three copper conductors.The differences in the key evaluation parameters were analyzed based on the structural dimensional parameters,processing methods,and classical bending stiffness theoretical models of the three copper conductor types.The results provide an important theoretical guidance for the structural design and engineering applications of marine cable conductors.
文摘The tensile properties of a series of soybean protein yarns are tested in USTER THINKPAID Ⅲ. A nonlinear viscoelastic model has been proposed to describe the tensile behavior of soybean protein yarns. The model is composed of a Maxwell element, a linear spring and a nonlinear spring. The tensile properties of soybean protein yam are analyzed. The stress-strain curves of the yams are fitted. The average breaking tenacity and specific work of rupture are calculated using the average breaking strain. Comparisons indicate that theoretical predictions conform the experimental results very well.
文摘Water transport through the pore structure of the knitted fabric can occur only in place where the fiber-water surface attraction force is greater than the water weight in the capillary. To investigate wet permeability of the knitted yarn in the fabric, a liquid transport model is established. The main factors which have significant influences on the liquid transport have been analyzed. It is derived from the argument that the optimal design for the knitted fabric with quick sweat transport property can be obtained.
文摘In this paper,the vector equation of a generaliseddoubly wound helix was derived.Treloar’s pliedyarn geometry could be obtained as a special case ofthe generalised doubly wound helix.The shortest fi-bre length around the surface of a helical tube(formed by fibre helices)was determined by apply-ing variational principles.The fibre length as calcu-lated by using Treloar’s geometry was compared in-directly with the shortest possible fibre length at dif-ferent levels of yarn deformation when some of Tre-loar’s rigid geometrical constraints were relaxed.Anew idea based on non-concentric circles was intro-duced to approximate the fibre helix movement in atwo-ply yarn.A torsional model of two-ply yarnwas developed and the theoretical predictions werecompared with some preliminary experimental re-sults.
基金supported by Major Program of National Natural Science Foundation of China (Grant No. 50635050)National Natural Science Foundation of China (Grant No. 50575124)
文摘Rolling process plays an important role in the manufacture of Bi-based high temperature superconductor tapes, and the plastic flow regularities of the superconducting wires during deformation will directly affect the ultimate quality of the tapes. In order to investigate the effect of cross-sectional shapes before fiat rolling on the performance and homogeneity of the tapes, some numerical models of Bi-2223/Ag wires with different cross-sectional shapes including circular, square, elliptical and racetrack cross-sections are constructed during the rolling process. By comparing the relative density, logarithmic strain ratio and length-width ratio on the filaments, it is revealed that Bi-2223/Ag wire with special-shaped cross-section can achieve better conductivity than the round wire, in particular, the racetrack cross-sectional wire has the second best performance among four wires. Based on material processability and experimental condition, tri-pass racetrack drawing technique is employed to optimize the process and obtain racetrack cross-sectional wire. The rolling process of Bi-2223/Ag wire with racetrack cross-section causes more intensive deformation of filaments in the center of the tape and achieves the filaments with larger length-width ratio. Also, the deformation distribution of filaments verifies the numerical results. Consequently, the racetrack drawing technique can be utilized for a reference during the mechanical processing and to increase the current transmission capacities of Bi-2223/Ag tapes.
文摘Modeling the 3D geometric configuration of yarn is the base of building the 3D fabric structure. The surfaces of the yarns are modeled by many facets. To improve the efficiency of modeling, 3D yarn is usually designed by Bezier curve, spline curve or B-spline curve on the principle of Computer Graphics. The paper reviews different 3D modeling methods for single yarn from the view of cross-section and central line. Some improvements for a better visual effect such as inserting twist and hairiness are illustrated as well. Based on the single yarn, the folded yarn and some fancy yarns can also be modeled in 3D space as long as the cross-sections of the control sections of the component single yarn are determined. Applications of the various 3D yarns are demonstrated. The advantages and the drawbacks of various methods are explained and compared as well. Comparatively speaking, modeling technology based on spline curve is more convenient and flexible, perhaps it is the most popular tool since it is capable of designing different kinds of yarns mentioned above and gets the maximum support from the different developing platforms such as OpenGL, 3DS-MAX, Solid Works CAD, etc.
文摘In this paper, a dynamic fault model is proposed to predict yarn end breakage in the spinning procedure through investigation of fault characteristics. In view of the principle that uniformity bad in raw material causes iustable yarn formation, the investigation focuses on the fault characteristic existing in the dynamic tension. Analyzing the dynamic spinning system, the phenomenon of over random shock in a spinning triangle is discovered to be the main physical event prior to yarn end breakage. The fault characteristic is further confirmed by dynamic tests and signal processing, and can be used to make an approach to predicting yarn end breakage. A relative energy feature is defined for evaluating the tendency of yarn end breakage, and its effectiveness is verified by on.line monitoring tests in the laboratory. The research results show that the proposed dynamic fault model has not only an advantage in indicating the presence of fault characteristics, but also great potentials in quantitating fault in online spinning monitoring.
