Background: There is emerging evidence that the increased susceptibility to developing alcohol and substance use dis- orders in those with a family history of Alcohol Dependence (AD) may be related to structural diffe...Background: There is emerging evidence that the increased susceptibility to developing alcohol and substance use dis- orders in those with a family history of Alcohol Dependence (AD) may be related to structural differences in brain circuits that influence the salience of rewards or modify the efficiency of information processing. Externalizing disorders of childhood including Attention Deficit Hyperactivity Disorder, Conduct and Oppositional Disorders are a prominent feature of those with a positive family history. The caudate nuclei have been implicated in both the salience of rewards and in the pathophysiology of alcohol dependence and these often antecedent childhood disorders. Methods: Adolescent/young adult high and low-risk for AD offspring (N = 130) were studied using magnetic resonance imaging. Volumes of the caudate nucleus were obtained using manual tracing with BRAINS2 software and neuropsychological functioning determined. Childhood disorders were assessed as part of a long-term longitudinal follow-up that includes young adult assessment. Dopaminergic variation was assessed using genotypic variation in the catechol-O-methyltransferase (COMT) and DRD2 genes. Results: High-risk subjects showed poorer Working Memory functioning. Caudate volume did not differ between high and low-risk subjects, but those with externalizing disorders of childhood showed reduced caudate volume. Variation in COMT and DRD2 genes was associated with Working Memory performance and caudate volume. Conclusions: Caudate volume is reduced in association with externalizing disorders of childhood/adolescence. Working Memory deficits appear in familial high-risk offspring and those with externalizing disorders of childhood. The dopaminergic system appears to be involved in both working memory performance and externalizing disorders of childhood.展开更多
With the civilization and modernization of human society,occupational health has emerged as a fundamental goal of social justice,as highlighted in the United Nations'Sustainable Development Goals(SDGs)since 2016.S...With the civilization and modernization of human society,occupational health has emerged as a fundamental goal of social justice,as highlighted in the United Nations'Sustainable Development Goals(SDGs)since 2016.Specifically,"SDG Goal 1:No Poverty","SDG 3:Good Health and Well-being",and"SDG 8:Decent Work and Economic Growth",are interconnected with other SDGs to support the pursuit of occupational health.展开更多
Coronavirus is a Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) caused by a novel coronavirus belonging to the family Coronaviridae. The disease was first discovered in December 2019 in Wuhan City, Hubei...Coronavirus is a Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) caused by a novel coronavirus belonging to the family Coronaviridae. The disease was first discovered in December 2019 in Wuhan City, Hubei Province, China. A few months later, the disease spread all over the world and became an epidemic. The infection for most people is mild to moderate but in Vulnerable groups, if they have the infections, they might experience severe COVID-19. Saudi Arabia initiated its response plan early, and all sectors and agencies worked in an integrated way to combat the disease. It has maintained proper communication during the pandemic and ensured community involvement, epidemiologic surveillance, and activation of rapid response teams. The COVID-19 pandemic significantly affected daily lives. Schools and daycares were closed, education was online, traveling stopped, work was suspended, gathering in social activities and practicing religious rituals, like praying or doing Umrah or Hajj, were banded. Changing lifestyles as a response to COVID-19 impacted whole communities with different categories of children, parents, and families. Women usually take the majority of daily responsibilities. The sudden change in lifestyle during COVID-19 put pressure on mothers, especially those who are working to balance work and family obligations. This study aims to identify the impact of Coronavirus disease 2019 on working mothers in Saudi Arabia. Method: Data of the study was collected through survey posted on social media and analyzed through Excel. It focuses on five aspects: health, lifestyle, social relations, work production and financial status. Our target population was working mothers in Saudi Arabia aged at least 25 years. Results: In this study, all factors affected working mothers categorized under two groups: Social Economic Status and Work suspension. For Social Economic Status factors, we find five factors which are monthly income, main breadwinner, number of children at school age, type of housing, and type of work. Almost all mothers include spiritual activities to their routine to cope with stress during this period. About half of our sample have negative impact on their mental health because they are the main breadwinner, and mothers with a smaller number of children at school age have more challenges to cope up. We found that mothers who own a house or work at governmental sector have better outcome of health. After analyzing data related to Work suspension, we found that mothers who have work support have better management for life circumstances, however their health outcomes were negatively affected. In addition, mothers working at education sector have the highest positive impact among other sectors. Our data shows that working mothers’ abilities to follow up with their children decreased. This study recommends that there is need to invest more in working mothers’ research and supportive programs and ensure collaboration globally to address working mothers’ needs and share experiences.展开更多
The working group on design and evaluation of intelligent system ergonomics,under SAC/TC 7,Ergonomics,was officially established in Qingdao city,Shandong province on June 18.The launching ceremony was jointly organize...The working group on design and evaluation of intelligent system ergonomics,under SAC/TC 7,Ergonomics,was officially established in Qingdao city,Shandong province on June 18.The launching ceremony was jointly organized by the Sub-institute of Fundamental Standardization of CNIS and China Standard Certification Co.,Ltd.It was attended by more than 60 experts and industry representatives in fields such as smart home technology,intelligent driving,wearable devices,medical health,and nuclear engineering.展开更多
The performance and efficiency of hydraulic excavators heavily depend on the design and optimization of their working devices.The working device,which consists of the boom,arm,and bucket,plays a crucial role in determ...The performance and efficiency of hydraulic excavators heavily depend on the design and optimization of their working devices.The working device,which consists of the boom,arm,and bucket,plays a crucial role in determining the machine's digging capacity,stability,and overall operational efficiency.This paper presents a comprehensive study on the dynamics simulation and optimization of hydraulic excavator working devices.The paper outlines the fundamental principles of dynamic modeling,incorporating multi-body dynamics and hydraulic system analysis.It further explores various simulation techniques to evaluate the performance of the working device under varying operational conditions,including load and hydraulic system effects.The study also addresses performance optimization,focusing on multi-objective optimization methods that balance multiple factors such as energy efficiency,speed,and load capacity.Additionally,the paper discusses key factors influencing performance,such as mechanical design,material properties,and operational conditions.The results of the dynamic simulations and optimization analyses demonstrate potential improvements in operational efficiency and system stability,providing a valuable framework for the design and enhancement of hydraulic excavator working devices.展开更多
BACKGROUND Working memory serves as a fundamental cognitive function that substantially impacts performance in various cognitive tasks.Extensive neurophysiological research has established that theta oscillations(4-8 ...BACKGROUND Working memory serves as a fundamental cognitive function that substantially impacts performance in various cognitive tasks.Extensive neurophysiological research has established that theta oscillations(4-8 Hz)play an essential role in supporting working memory operations.Theta-band transcranial alternating current stimulation(tACS)offers a potential mechanism for working memory enhancement through direct modulation of these fundamental neural oscillations.Nevertheless,current empirical evidence shows substantial variability in the observed effects of theta-tACS across studies.AIM To conduct a systematic review and meta-analysis evaluating the effects of thetatACS on working memory performance in healthy adults.METHODS A systematic literature search was performed on PubMed,EMBASE,and Web of Science up to March 10,2025.Effect sizes were computed using Hedges’g with 95%confidence intervals(CIs),with separate meta-analyses for all included studies and for distinct working memory paradigms[n-back and delayed matchto-sample(DMTS)tasks]to examine potential task-specific effects.Subgroup analyses and meta-regression were performed to evaluate the influence of key moderating variables.RESULTS The systematic review included 21 studies(67 effect sizes).Initial meta-analysis showed theta-tACS moderately improved working memory(Hedges’g=0.405,95%CI:0.212-0.598).However,this effect became nonsignificant after correcting for publication bias(trim-and-fill adjusted Hedges’g=0.082,95%CI:-0.052 to 0.217).Task-specific analyses revealed significant benefits in n-back tasks(Hedges’g=0.463,95%CI:0.193-0.733)but not in DMTS tasks(Hedges’g=0.257,95%CI:-0.186 to 0.553).Moderator analyses showed that performance in n-back tasks was influenced by stimulation frequency(P=0.001),concurrent status(P=0.014),task modality(P=0.005),and duration(P=0.013),whereas only the region of targeted stimulation(P=0.012)moderated DMTS tasks.CONCLUSION Theta-tACS enhances working memory in healthy adults,with effects modulated by the task type and protocol parameters,offering dual implications for cognitive enhancement and clinical interventions.展开更多
Social working memory(SWM)—the ability to maintain and manipulate social information in the brain—plays a crucial role in social interactions.However,research on SWM is still in its infancy and is often treated as a...Social working memory(SWM)—the ability to maintain and manipulate social information in the brain—plays a crucial role in social interactions.However,research on SWM is still in its infancy and is often treated as a unitary construct.In the present study,we propose that SWM can be conceptualized as having two relatively independent components:"externally oriented SWM"(e-SWM)and"internally oriented SWM"(i-SWM).To test this external–internal hypothesis,participants were tasked with memorizing and ranking either facial expressions(e-SWM)or personality traits(i-SWM)associated with images of faces.We then examined the neural correlates of these two SWM components and their functional roles in empathy.The results showed distinct activations as the e-SWM task activated the postcentral and precentral gyri while the i-SWM task activated the precuneus/posterior cingulate cortex and superior frontal gyrus.Distinct multivariate activation patterns were also found within the dorsal medial prefrontal cortex in the two tasks.Moreover,partial least squares analyses combining brain activation and individual differences in empathy showed that e-SWM and i-SWM brain activities were mainly correlated with affective empathy and cognitive empathy,respectively.These findings implicate distinct brain processes as well as functional roles of the two types of SWM,providing support for the internal–external hypothesis of SWM.展开更多
Working memory is a core cognitive function that supports goal-directed behavior and complex thought.We developed a spatial working memory and attention test on paired symbols(SWAPS)which has been proved to be a usefu...Working memory is a core cognitive function that supports goal-directed behavior and complex thought.We developed a spatial working memory and attention test on paired symbols(SWAPS)which has been proved to be a useful and valid tool for spatial working memory and attention studies in the fields of cognitive psychology,education,and psychiatry.The repeated administration of working memory capacity tests is common in clinical and research settings.Studies suggest that repeated cognitive tests may improve the performance scores also known as retest effects.The systematic investigation of retest effects in SWAPS is critical for interpreting scientific results,but it is still not fully developed.To address this,we recruited 77 college students aged 18–21 years and used SWAPS comprising 72 trials with different memory loads,learning time,and delay span.We repeated the test once a week for five weeks to investigate the retest effects of SWAPS.There were significant retest effects in the first two tests:the accuracy of the SWAPS tests significantly increased,and then stabilized.These findings provide useful information for researchers to appropriately use or interpret the repeated working memory tests.Further experiments are still needed to clarify the factors that mediate the retest effects,and find out the cognitive mechanism that influences the retest effects.展开更多
The optimization of working fluids in single-well coaxial geothermal systems presents a critical pathway for advancing the use of enhanced geothermal systems(EGS)in renewable energy applications.This study evaluates t...The optimization of working fluids in single-well coaxial geothermal systems presents a critical pathway for advancing the use of enhanced geothermal systems(EGS)in renewable energy applications.This study evaluates the thermo-hydraulic performance of three working fluids(H_(2)O,CO_(2),and H_(2))in a single-well coaxial geothermal system,focusing on the effects of their injection temperatures.Using a 3D finite element model in COMSOL Multiphysics,simulations were conducted at three injection temperatures(17℃,27℃,40℃)under constant mass flow rates.The results reveal that hydrogen significantly outperforms water and carbon dioxide,achieving a 297.77% and 5453.76% higher thermal output,respectively.Notably,the heat transfer efficiency is significantly improved when the injected working fluids are at 40℃,compared to 27℃;this demonstrates a positive correlation between injection temperature and thermal recovery.Though water systems exhibit better geological compatibility,the superior thermal properties of hydrogen position it as a promising alternative-despite potential subsurface challenges.This study provides critical insights for advancing the application of high-efficiency geothermal systems as well as the development of non-aqueous working fluids,thus contributing to the sustainable utilization of geothermal energy.展开更多
The flow ripple caused by an axial piston pump may lead to pipe vibrations and lower hydraulic component reliability,which are of particular concern in hydraulic systems.The valve plate of the pump is considered the p...The flow ripple caused by an axial piston pump may lead to pipe vibrations and lower hydraulic component reliability,which are of particular concern in hydraulic systems.The valve plate of the pump is considered the part most related to flow ripple,and its structural design is an important topic.In this study,an analytical model for the axial piston pump flow ripple was established and verified using a numerical analysis with computational fluid dynamics(CFD)calculations.Moreover,a parametric analysis of the valve plate was performed to investigate the critical parameters and their ranges.A fast optimization method,the rotation vector optimization method(RVOM),was proposed for the valve plate design and compared with the currently used optimization methods to prove its efficiency.As a constant-pressure pump works in different states of swashplate angle,outlet pressure,and pump speed,an optimization principle for the entire working status was proposed to achieve the overall reduction performance.A test rig for an aircraft hydraulic pump was established,and validation experiments were conducted.It was determined that the optimized pump could achieve reduction at multiple working statuses,and the largest pressure pulsation reduction ratios for the typical speed and speed sweep tests reached 64.7%and 71.7%,respectively.The model and method proposed in this study are proven to be effective and accurate.展开更多
This paper is concerned with a non-intrusive anomaly detection method for carving machine systems with variant working conditions,and a novel unsupervised detection framework that integrates convolutional autoencoder(...This paper is concerned with a non-intrusive anomaly detection method for carving machine systems with variant working conditions,and a novel unsupervised detection framework that integrates convolutional autoencoder(CAE)and Gaussian mixture hidden Markov model(GMHMM)is proposed.Firstly,the built-in sensor information under normal conditions is recorded,and a 1D convolutional autoencoder is employed to compress high-dimensional time series,thereby transforming the anomaly detection problem in high-dimensional space into a density estimation problem in a latent low-dimensional space.Then,two separate estimation networks are utilized to predict the mixture memberships and state transition probabilities for each sample,enabling GMHMM to handle low-dimensional representations and multi-condition information.Furthermore,a cost function comprising CAE reconstruction and GMHMM probability assessment is constructed for the low-dimensional representation generation and subsequent density estimation in an end-to-end fashion,and the joint optimization effectively enhances the anomaly detection performance.Finally,experiments are carried out on a self-developed multi-axis carving machine platform to validate the effectiveness and superiority of the proposed method.展开更多
Working memory is an executive memory process that includes encoding,maintenance,and retrieval.These processes can be modulated by transcranial alternating current stimulation(tACS)with sinusoidal waves.However,little...Working memory is an executive memory process that includes encoding,maintenance,and retrieval.These processes can be modulated by transcranial alternating current stimulation(tACS)with sinusoidal waves.However,little is known about the impact of the rate of current change on working memory.In this study,we aimed to investigate the effects of two types of tACS with different rates of current change on working memory performance and brain activity.We applied a randomized,single-blind design and divided 81 young participants who received triangular wave tACS,sinusoidal wave tACS,or sham stimulation into three groups.Participants performed n-back tasks,and electroencephalograms were recorded before,during,and after active or sham stimulation.Compared to the baseline,working memory performance(accuracy and response time)improved after stimulation under all stimulation conditions.According to drift-diffusion model analysis,triangular wave tACS significantly increased the efficiency of non-target information processing.In addition,compared with sham conditions,triangular wave tACS reduced alpha power oscillations in the occipital lobe throughout the encoding period,while sinusoidal wave tACS increased theta power in the central frontal region only during the later encoding period.The brain network connectivity results showed that triangular wave tACS improved the clustering coefficient,local efficiency,and node degree intensity in the early encoding stage,and these parameters were positively correlated with the non-target drift rate and decision starting point.Our findings on how tACS modulates working memory indicate that triangular wave tACS significantly enhances brain network connectivity during the early encoding stage,demonstrating an improvement in the efficiency of working memory processing.In contrast,sinusoidal wave tACS increased the theta power during the later encoding stage,suggesting its potential critical role in late-stage information processing.These findings provide valuable insights into the potential mechanisms by which tACS modulates working memory.展开更多
Rhythm,as a prominent characteristic of auditory experiences such as speech and music,is known to facilitate attention,yet its contribution to working memory(WM)remains unclear.Here,human participants temporarily reta...Rhythm,as a prominent characteristic of auditory experiences such as speech and music,is known to facilitate attention,yet its contribution to working memory(WM)remains unclear.Here,human participants temporarily retained a 12-tone sequence presented rhythmically or arrhythmically in WM and performed a pitch change-detection task.Behaviorally,while having comparable accuracy,rhythmic tone sequences showed a faster response time and lower response boundaries in decision-making.Electroencephalographic recordings revealed that rhythmic sequences elicited enhanced non-phase-locked beta-band(16 Hz–33 Hz)and theta-band(3 Hz–5 Hz)neural oscillations during sensory encoding and WM retention periods,respectively.Importantly,the two-stage neural signatures were correlated with each other and contributed to behavior.As beta-band and theta-band oscillations denote the engagement of motor systems and WM maintenance,respectively,our findings imply that rhythm facilitates auditory WM through intricate oscillation-based interactions between the motor and auditory systems that facilitate predictive attention to auditory sequences.展开更多
To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The ...To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The yielding resistance enhancement effect(ω)caused by working environment constraints is evaluated through multi-layer composite sleeve hole expansion analysis,forming a theoretical framework for calculating the working yielding force.Laboratory and in-situ pull-out tests are conducted to determine the yielding performance and validate the analytical theory.The main conclusions are:(1)Yielding force and energy-release capacity increase withω,significantly outperforming the unconfined state.(2)In-situ tests under varying rockmass and geostress conditions(F1–F3)determine the yielding force increases to 183.4–290.1,204.0–290.8,and 235.0–327.1 kN.(3)The slight deviation(–12.5%to 6.2%)between the theoretical and measured yielding force confirms that the analytical theory effectively describes the working yielding performance.(4)ωincreases with higher geostress and improved rock mechanical properties,with initial geostress(σ_(0))and elastic modulus of surrounding rock(E_(3))identified as critical parameters.展开更多
Wearable and flexible strain sensors play a pivotal role in comprehensive health monitoring and exercise guidance applications.High sensitivity and wide sensing windows are necessary for effectively monitoring and cap...Wearable and flexible strain sensors play a pivotal role in comprehensive health monitoring and exercise guidance applications.High sensitivity and wide sensing windows are necessary for effectively monitoring and capturing diverse physiological signals,whereas these features are challenging to achieve simultaneously with current sensors.To address this limitation,we developed an innovative sensor modality incorporating synergistic ionic and electronic pathways(SI&EP),enabling both high sensitivity and wide working range.The SI&EP sensor architecture incorporates:(1)a highly conductive wrinklecrack electronic sensing layer to enhance and adjust sensitivity for detecting subtle physiological signals(e.g.,pulse and pronunciation),and(2)a highly stretchable ionic sensing layer to extend the working range for large-scale joint movement monitoring.Through systematically optimizing the structure and conductivity of both layers,the SI&EP sensors simultaneously achieve a high sensitivity of 5805.3 and a wide working range up to 200% strain.This unique combination of high sensitivity and wide working range empowers the SI&EP sensor for comprehensive physiological signal monitoring,scientific exercise guidance,and machine learning-assisted physiological activity recognition.This research presents a new methodology to extend the working range without compromising sensitivity,with potential applications in comprehensive health monitoring and disease rehabilitation training.展开更多
Efficient working capital management(WCM)creates value for both management and shareholders by enhancing cash flows and reducing investment in receivables and inventory.It supports liquidity and minimizes financial di...Efficient working capital management(WCM)creates value for both management and shareholders by enhancing cash flows and reducing investment in receivables and inventory.It supports liquidity and minimizes financial distress risks,aligning with the goal of shareholder value maximization.However,traditional manual approaches to WCM are no longer sufficient due to the rapid and complex changes in economic and business environments.As a result,firms increasingly rely on artificial intelligence(AI)in WCM.AI offers advanced capabilities in prediction,monitoring,and problem-solving by processing vast data,identifying variable relationships,and adapting to change faster than human cognition.This paper explores the fundamentals of WCM and AI,their interconnections,and the strategic opportunities AI introduces to optimize WCM in modern enterprises.展开更多
The influence of hot working on the microstructures of TC11/Ti2 Al Nb dual-alloy joints welded by electron beam welding(EBW) process was investigated. The tensile tests were performed at room temperature for specimens...The influence of hot working on the microstructures of TC11/Ti2 Al Nb dual-alloy joints welded by electron beam welding(EBW) process was investigated. The tensile tests were performed at room temperature for specimens before and after thermal exposure. The results show that the fusion zone of TC11/Ti2 Al Nb dual-alloy joint welded by EBW is mainly composed of β phase. After deformation and heat treatment, the grain boundaries of the as-cast alloy are broken and the fusion zone mainly consists of β, α2and α phases. The fusion zone performs poor property in the tensile test. Specimens before and after thermal exposure all fail in this area under different deformation conditions. The ultimate tensile strength of specimens after heat treatment is up to 1190 MPa at room temperature. The joints by water quenching after deformation have better plasticity with an elongation up to 4.4%. After thermal exposure at 500 °C for 100 h, the tensile strength of the specimen slightly rises while the ductility changes a little. SEM observation shows that the fracture mechanism is predominantly transgranular under different deformation conditions.展开更多
A more accurate analysis method on working modes is proposed by considering the winding terminal voltage and the eondueting power device as state parameters. For the three-phase hybrid excitation doubly salient machi...A more accurate analysis method on working modes is proposed by considering the winding terminal voltage and the eondueting power device as state parameters. For the three-phase hybrid excitation doubly salient machine （HEDSM） motor and its three-phase full-bridge inverter, in the proposed analytical method, all possible working modes are generally listed. Then, with the H_PWM-L_ON control strategy, the working modes are detailed with eorresponding equivalent circuits. Experimental results verify the robustness of the analysis.展开更多
The role of subtransus hot working on microstructure morphology of TA15 titanium alloy plate with elongatedαphases was studied by quantitative metallography on different sections. The results show that the microstruc...The role of subtransus hot working on microstructure morphology of TA15 titanium alloy plate with elongatedαphases was studied by quantitative metallography on different sections. The results show that the microstructure morphology is mainly affected by loading direction. When the sample is compressed along normal direction, microstructure on the section vertical to normal direction has equiaxed primaryαphase but microstructure on the section vertical to rolling direction has strip primaryαphase with long axis along tangential direction. When the sample is compressed along rolling direction, microstructure on the section vertical to normal direction has strip primaryαphase elongated along tangential direction but microstructure on the section vertical to rolling direction consists of strip and irregular broad-band primaryαphase. The strip primaryαphase aspect ratio is smaller at lower temperature due to the dynamic break-down ofαphase. The difference on primaryαphase aspect ratio between different sections decreases after compression along distinct directions in two loading passes, suggesting the improvement of equiaxity of primaryαphase.展开更多
文摘Background: There is emerging evidence that the increased susceptibility to developing alcohol and substance use dis- orders in those with a family history of Alcohol Dependence (AD) may be related to structural differences in brain circuits that influence the salience of rewards or modify the efficiency of information processing. Externalizing disorders of childhood including Attention Deficit Hyperactivity Disorder, Conduct and Oppositional Disorders are a prominent feature of those with a positive family history. The caudate nuclei have been implicated in both the salience of rewards and in the pathophysiology of alcohol dependence and these often antecedent childhood disorders. Methods: Adolescent/young adult high and low-risk for AD offspring (N = 130) were studied using magnetic resonance imaging. Volumes of the caudate nucleus were obtained using manual tracing with BRAINS2 software and neuropsychological functioning determined. Childhood disorders were assessed as part of a long-term longitudinal follow-up that includes young adult assessment. Dopaminergic variation was assessed using genotypic variation in the catechol-O-methyltransferase (COMT) and DRD2 genes. Results: High-risk subjects showed poorer Working Memory functioning. Caudate volume did not differ between high and low-risk subjects, but those with externalizing disorders of childhood showed reduced caudate volume. Variation in COMT and DRD2 genes was associated with Working Memory performance and caudate volume. Conclusions: Caudate volume is reduced in association with externalizing disorders of childhood/adolescence. Working Memory deficits appear in familial high-risk offspring and those with externalizing disorders of childhood. The dopaminergic system appears to be involved in both working memory performance and externalizing disorders of childhood.
文摘With the civilization and modernization of human society,occupational health has emerged as a fundamental goal of social justice,as highlighted in the United Nations'Sustainable Development Goals(SDGs)since 2016.Specifically,"SDG Goal 1:No Poverty","SDG 3:Good Health and Well-being",and"SDG 8:Decent Work and Economic Growth",are interconnected with other SDGs to support the pursuit of occupational health.
文摘Coronavirus is a Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) caused by a novel coronavirus belonging to the family Coronaviridae. The disease was first discovered in December 2019 in Wuhan City, Hubei Province, China. A few months later, the disease spread all over the world and became an epidemic. The infection for most people is mild to moderate but in Vulnerable groups, if they have the infections, they might experience severe COVID-19. Saudi Arabia initiated its response plan early, and all sectors and agencies worked in an integrated way to combat the disease. It has maintained proper communication during the pandemic and ensured community involvement, epidemiologic surveillance, and activation of rapid response teams. The COVID-19 pandemic significantly affected daily lives. Schools and daycares were closed, education was online, traveling stopped, work was suspended, gathering in social activities and practicing religious rituals, like praying or doing Umrah or Hajj, were banded. Changing lifestyles as a response to COVID-19 impacted whole communities with different categories of children, parents, and families. Women usually take the majority of daily responsibilities. The sudden change in lifestyle during COVID-19 put pressure on mothers, especially those who are working to balance work and family obligations. This study aims to identify the impact of Coronavirus disease 2019 on working mothers in Saudi Arabia. Method: Data of the study was collected through survey posted on social media and analyzed through Excel. It focuses on five aspects: health, lifestyle, social relations, work production and financial status. Our target population was working mothers in Saudi Arabia aged at least 25 years. Results: In this study, all factors affected working mothers categorized under two groups: Social Economic Status and Work suspension. For Social Economic Status factors, we find five factors which are monthly income, main breadwinner, number of children at school age, type of housing, and type of work. Almost all mothers include spiritual activities to their routine to cope with stress during this period. About half of our sample have negative impact on their mental health because they are the main breadwinner, and mothers with a smaller number of children at school age have more challenges to cope up. We found that mothers who own a house or work at governmental sector have better outcome of health. After analyzing data related to Work suspension, we found that mothers who have work support have better management for life circumstances, however their health outcomes were negatively affected. In addition, mothers working at education sector have the highest positive impact among other sectors. Our data shows that working mothers’ abilities to follow up with their children decreased. This study recommends that there is need to invest more in working mothers’ research and supportive programs and ensure collaboration globally to address working mothers’ needs and share experiences.
文摘The working group on design and evaluation of intelligent system ergonomics,under SAC/TC 7,Ergonomics,was officially established in Qingdao city,Shandong province on June 18.The launching ceremony was jointly organized by the Sub-institute of Fundamental Standardization of CNIS and China Standard Certification Co.,Ltd.It was attended by more than 60 experts and industry representatives in fields such as smart home technology,intelligent driving,wearable devices,medical health,and nuclear engineering.
文摘The performance and efficiency of hydraulic excavators heavily depend on the design and optimization of their working devices.The working device,which consists of the boom,arm,and bucket,plays a crucial role in determining the machine's digging capacity,stability,and overall operational efficiency.This paper presents a comprehensive study on the dynamics simulation and optimization of hydraulic excavator working devices.The paper outlines the fundamental principles of dynamic modeling,incorporating multi-body dynamics and hydraulic system analysis.It further explores various simulation techniques to evaluate the performance of the working device under varying operational conditions,including load and hydraulic system effects.The study also addresses performance optimization,focusing on multi-objective optimization methods that balance multiple factors such as energy efficiency,speed,and load capacity.Additionally,the paper discusses key factors influencing performance,such as mechanical design,material properties,and operational conditions.The results of the dynamic simulations and optimization analyses demonstrate potential improvements in operational efficiency and system stability,providing a valuable framework for the design and enhancement of hydraulic excavator working devices.
基金Supported by Shanghai Municipal Health Commission’s Special Clinical Research Project for the Hygiene Industry,No.20244Y0041Youth Initiation Fund of Naval Medical University,No.2023QN028 and No.2023QN030。
文摘BACKGROUND Working memory serves as a fundamental cognitive function that substantially impacts performance in various cognitive tasks.Extensive neurophysiological research has established that theta oscillations(4-8 Hz)play an essential role in supporting working memory operations.Theta-band transcranial alternating current stimulation(tACS)offers a potential mechanism for working memory enhancement through direct modulation of these fundamental neural oscillations.Nevertheless,current empirical evidence shows substantial variability in the observed effects of theta-tACS across studies.AIM To conduct a systematic review and meta-analysis evaluating the effects of thetatACS on working memory performance in healthy adults.METHODS A systematic literature search was performed on PubMed,EMBASE,and Web of Science up to March 10,2025.Effect sizes were computed using Hedges’g with 95%confidence intervals(CIs),with separate meta-analyses for all included studies and for distinct working memory paradigms[n-back and delayed matchto-sample(DMTS)tasks]to examine potential task-specific effects.Subgroup analyses and meta-regression were performed to evaluate the influence of key moderating variables.RESULTS The systematic review included 21 studies(67 effect sizes).Initial meta-analysis showed theta-tACS moderately improved working memory(Hedges’g=0.405,95%CI:0.212-0.598).However,this effect became nonsignificant after correcting for publication bias(trim-and-fill adjusted Hedges’g=0.082,95%CI:-0.052 to 0.217).Task-specific analyses revealed significant benefits in n-back tasks(Hedges’g=0.463,95%CI:0.193-0.733)but not in DMTS tasks(Hedges’g=0.257,95%CI:-0.186 to 0.553).Moderator analyses showed that performance in n-back tasks was influenced by stimulation frequency(P=0.001),concurrent status(P=0.014),task modality(P=0.005),and duration(P=0.013),whereas only the region of targeted stimulation(P=0.012)moderated DMTS tasks.CONCLUSION Theta-tACS enhances working memory in healthy adults,with effects modulated by the task type and protocol parameters,offering dual implications for cognitive enhancement and clinical interventions.
基金supported by the Key Program of Natural Science Foundation of Zhejiang Province(LZ20C090001)the National Natural Science Foundation of China(32271090,32171031,and 32071044)the China Brain Project(2021ZD0200409).
文摘Social working memory(SWM)—the ability to maintain and manipulate social information in the brain—plays a crucial role in social interactions.However,research on SWM is still in its infancy and is often treated as a unitary construct.In the present study,we propose that SWM can be conceptualized as having two relatively independent components:"externally oriented SWM"(e-SWM)and"internally oriented SWM"(i-SWM).To test this external–internal hypothesis,participants were tasked with memorizing and ranking either facial expressions(e-SWM)or personality traits(i-SWM)associated with images of faces.We then examined the neural correlates of these two SWM components and their functional roles in empathy.The results showed distinct activations as the e-SWM task activated the postcentral and precentral gyri while the i-SWM task activated the precuneus/posterior cingulate cortex and superior frontal gyrus.Distinct multivariate activation patterns were also found within the dorsal medial prefrontal cortex in the two tasks.Moreover,partial least squares analyses combining brain activation and individual differences in empathy showed that e-SWM and i-SWM brain activities were mainly correlated with affective empathy and cognitive empathy,respectively.These findings implicate distinct brain processes as well as functional roles of the two types of SWM,providing support for the internal–external hypothesis of SWM.
基金the National Natural Science Foundation of China(No.91632103)the Shanghai Education Commission Research and Innovation Program(No.2019-01-07-00-02-E00037)+2 种基金the Program of Shanghai Subject Chief Scientist(No.17XD1401700)the Higher Education Disciplinary Innovation Programthe“Eastern Scholar”Project。
文摘Working memory is a core cognitive function that supports goal-directed behavior and complex thought.We developed a spatial working memory and attention test on paired symbols(SWAPS)which has been proved to be a useful and valid tool for spatial working memory and attention studies in the fields of cognitive psychology,education,and psychiatry.The repeated administration of working memory capacity tests is common in clinical and research settings.Studies suggest that repeated cognitive tests may improve the performance scores also known as retest effects.The systematic investigation of retest effects in SWAPS is critical for interpreting scientific results,but it is still not fully developed.To address this,we recruited 77 college students aged 18–21 years and used SWAPS comprising 72 trials with different memory loads,learning time,and delay span.We repeated the test once a week for five weeks to investigate the retest effects of SWAPS.There were significant retest effects in the first two tests:the accuracy of the SWAPS tests significantly increased,and then stabilized.These findings provide useful information for researchers to appropriately use or interpret the repeated working memory tests.Further experiments are still needed to clarify the factors that mediate the retest effects,and find out the cognitive mechanism that influences the retest effects.
基金funded by the China National Administration of Coal Geology Science and Technology Innovation Project"Research on Clean Energy Exploration and Development Technology"(ZMKJ-2021-ZX04)the China National Administration of Coal Geology Special Task Project"Research on Geothermal Resource Exploration and Development Technology"(ZMKJ-2023-JBGS06)。
文摘The optimization of working fluids in single-well coaxial geothermal systems presents a critical pathway for advancing the use of enhanced geothermal systems(EGS)in renewable energy applications.This study evaluates the thermo-hydraulic performance of three working fluids(H_(2)O,CO_(2),and H_(2))in a single-well coaxial geothermal system,focusing on the effects of their injection temperatures.Using a 3D finite element model in COMSOL Multiphysics,simulations were conducted at three injection temperatures(17℃,27℃,40℃)under constant mass flow rates.The results reveal that hydrogen significantly outperforms water and carbon dioxide,achieving a 297.77% and 5453.76% higher thermal output,respectively.Notably,the heat transfer efficiency is significantly improved when the injected working fluids are at 40℃,compared to 27℃;this demonstrates a positive correlation between injection temperature and thermal recovery.Though water systems exhibit better geological compatibility,the superior thermal properties of hydrogen position it as a promising alternative-despite potential subsurface challenges.This study provides critical insights for advancing the application of high-efficiency geothermal systems as well as the development of non-aqueous working fluids,thus contributing to the sustainable utilization of geothermal energy.
基金Supported by National Natural Science Foundation of China(Grant No.51975025)National Key Research and Development Program of China(Grant No.2019YFB2004500)。
文摘The flow ripple caused by an axial piston pump may lead to pipe vibrations and lower hydraulic component reliability,which are of particular concern in hydraulic systems.The valve plate of the pump is considered the part most related to flow ripple,and its structural design is an important topic.In this study,an analytical model for the axial piston pump flow ripple was established and verified using a numerical analysis with computational fluid dynamics(CFD)calculations.Moreover,a parametric analysis of the valve plate was performed to investigate the critical parameters and their ranges.A fast optimization method,the rotation vector optimization method(RVOM),was proposed for the valve plate design and compared with the currently used optimization methods to prove its efficiency.As a constant-pressure pump works in different states of swashplate angle,outlet pressure,and pump speed,an optimization principle for the entire working status was proposed to achieve the overall reduction performance.A test rig for an aircraft hydraulic pump was established,and validation experiments were conducted.It was determined that the optimized pump could achieve reduction at multiple working statuses,and the largest pressure pulsation reduction ratios for the typical speed and speed sweep tests reached 64.7%and 71.7%,respectively.The model and method proposed in this study are proven to be effective and accurate.
基金Supported by the National Natural Science Foundation of China(No.62203390).
文摘This paper is concerned with a non-intrusive anomaly detection method for carving machine systems with variant working conditions,and a novel unsupervised detection framework that integrates convolutional autoencoder(CAE)and Gaussian mixture hidden Markov model(GMHMM)is proposed.Firstly,the built-in sensor information under normal conditions is recorded,and a 1D convolutional autoencoder is employed to compress high-dimensional time series,thereby transforming the anomaly detection problem in high-dimensional space into a density estimation problem in a latent low-dimensional space.Then,two separate estimation networks are utilized to predict the mixture memberships and state transition probabilities for each sample,enabling GMHMM to handle low-dimensional representations and multi-condition information.Furthermore,a cost function comprising CAE reconstruction and GMHMM probability assessment is constructed for the low-dimensional representation generation and subsequent density estimation in an end-to-end fashion,and the joint optimization effectively enhances the anomaly detection performance.Finally,experiments are carried out on a self-developed multi-axis carving machine platform to validate the effectiveness and superiority of the proposed method.
基金supported by the Key-Area Research and Development Program of Guangdong Province(2023B0303030002)the Beijing Natural Science Foundation(IS23114,7242274)+4 种基金the China Postdoctoral Science Foundation(2023TQ0027 and 2024M754099)the STI 2030-Major Projects(2022ZD0208500)the National Natural Science Foundation of China(62336002,82071912,62406025,82202291,62373056,62306035)the Beijing Nova Program(20230484465)the Shenzhen Basic Research Program(JCYJ20241202124804007).
文摘Working memory is an executive memory process that includes encoding,maintenance,and retrieval.These processes can be modulated by transcranial alternating current stimulation(tACS)with sinusoidal waves.However,little is known about the impact of the rate of current change on working memory.In this study,we aimed to investigate the effects of two types of tACS with different rates of current change on working memory performance and brain activity.We applied a randomized,single-blind design and divided 81 young participants who received triangular wave tACS,sinusoidal wave tACS,or sham stimulation into three groups.Participants performed n-back tasks,and electroencephalograms were recorded before,during,and after active or sham stimulation.Compared to the baseline,working memory performance(accuracy and response time)improved after stimulation under all stimulation conditions.According to drift-diffusion model analysis,triangular wave tACS significantly increased the efficiency of non-target information processing.In addition,compared with sham conditions,triangular wave tACS reduced alpha power oscillations in the occipital lobe throughout the encoding period,while sinusoidal wave tACS increased theta power in the central frontal region only during the later encoding period.The brain network connectivity results showed that triangular wave tACS improved the clustering coefficient,local efficiency,and node degree intensity in the early encoding stage,and these parameters were positively correlated with the non-target drift rate and decision starting point.Our findings on how tACS modulates working memory indicate that triangular wave tACS significantly enhances brain network connectivity during the early encoding stage,demonstrating an improvement in the efficiency of working memory processing.In contrast,sinusoidal wave tACS increased the theta power during the later encoding stage,suggesting its potential critical role in late-stage information processing.These findings provide valuable insights into the potential mechanisms by which tACS modulates working memory.
基金supported by the National Natural Science Foundation of China(12171373)supported by the Fundamental Research Funds for the Central Universities of China(GK202207018).
文摘Rhythm,as a prominent characteristic of auditory experiences such as speech and music,is known to facilitate attention,yet its contribution to working memory(WM)remains unclear.Here,human participants temporarily retained a 12-tone sequence presented rhythmically or arrhythmically in WM and performed a pitch change-detection task.Behaviorally,while having comparable accuracy,rhythmic tone sequences showed a faster response time and lower response boundaries in decision-making.Electroencephalographic recordings revealed that rhythmic sequences elicited enhanced non-phase-locked beta-band(16 Hz–33 Hz)and theta-band(3 Hz–5 Hz)neural oscillations during sensory encoding and WM retention periods,respectively.Importantly,the two-stage neural signatures were correlated with each other and contributed to behavior.As beta-band and theta-band oscillations denote the engagement of motor systems and WM maintenance,respectively,our findings imply that rhythm facilitates auditory WM through intricate oscillation-based interactions between the motor and auditory systems that facilitate predictive attention to auditory sequences.
基金supported by the National Natural Science Foundation of China(Nos.U2468217,U2034205,and 52308391)。
文摘To elucidate the yielding performance of compact yielding anchor cables in working state,a yielding mechanical model incorporating extrusion friction and fastening rotation under confining pressure is constructed.The yielding resistance enhancement effect(ω)caused by working environment constraints is evaluated through multi-layer composite sleeve hole expansion analysis,forming a theoretical framework for calculating the working yielding force.Laboratory and in-situ pull-out tests are conducted to determine the yielding performance and validate the analytical theory.The main conclusions are:(1)Yielding force and energy-release capacity increase withω,significantly outperforming the unconfined state.(2)In-situ tests under varying rockmass and geostress conditions(F1–F3)determine the yielding force increases to 183.4–290.1,204.0–290.8,and 235.0–327.1 kN.(3)The slight deviation(–12.5%to 6.2%)between the theoretical and measured yielding force confirms that the analytical theory effectively describes the working yielding performance.(4)ωincreases with higher geostress and improved rock mechanical properties,with initial geostress(σ_(0))and elastic modulus of surrounding rock(E_(3))identified as critical parameters.
基金supported by the Chengdu Eastern New District Technology Innovation and Research and Development Project(No.2024-DBXQ-KJYF006)the Sichuan Science and Technology Program(No.2024YFFK0133)supported by the“Fundamental Research Funds for the Central Universities of China”and Medical Interdisciplinary Research Key Project of Sichuan University(2022).
文摘Wearable and flexible strain sensors play a pivotal role in comprehensive health monitoring and exercise guidance applications.High sensitivity and wide sensing windows are necessary for effectively monitoring and capturing diverse physiological signals,whereas these features are challenging to achieve simultaneously with current sensors.To address this limitation,we developed an innovative sensor modality incorporating synergistic ionic and electronic pathways(SI&EP),enabling both high sensitivity and wide working range.The SI&EP sensor architecture incorporates:(1)a highly conductive wrinklecrack electronic sensing layer to enhance and adjust sensitivity for detecting subtle physiological signals(e.g.,pulse and pronunciation),and(2)a highly stretchable ionic sensing layer to extend the working range for large-scale joint movement monitoring.Through systematically optimizing the structure and conductivity of both layers,the SI&EP sensors simultaneously achieve a high sensitivity of 5805.3 and a wide working range up to 200% strain.This unique combination of high sensitivity and wide working range empowers the SI&EP sensor for comprehensive physiological signal monitoring,scientific exercise guidance,and machine learning-assisted physiological activity recognition.This research presents a new methodology to extend the working range without compromising sensitivity,with potential applications in comprehensive health monitoring and disease rehabilitation training.
文摘Efficient working capital management(WCM)creates value for both management and shareholders by enhancing cash flows and reducing investment in receivables and inventory.It supports liquidity and minimizes financial distress risks,aligning with the goal of shareholder value maximization.However,traditional manual approaches to WCM are no longer sufficient due to the rapid and complex changes in economic and business environments.As a result,firms increasingly rely on artificial intelligence(AI)in WCM.AI offers advanced capabilities in prediction,monitoring,and problem-solving by processing vast data,identifying variable relationships,and adapting to change faster than human cognition.This paper explores the fundamentals of WCM and AI,their interconnections,and the strategic opportunities AI introduces to optimize WCM in modern enterprises.
基金Project(51175431)supported by the National Natural Science Foundation of China
文摘The influence of hot working on the microstructures of TC11/Ti2 Al Nb dual-alloy joints welded by electron beam welding(EBW) process was investigated. The tensile tests were performed at room temperature for specimens before and after thermal exposure. The results show that the fusion zone of TC11/Ti2 Al Nb dual-alloy joint welded by EBW is mainly composed of β phase. After deformation and heat treatment, the grain boundaries of the as-cast alloy are broken and the fusion zone mainly consists of β, α2and α phases. The fusion zone performs poor property in the tensile test. Specimens before and after thermal exposure all fail in this area under different deformation conditions. The ultimate tensile strength of specimens after heat treatment is up to 1190 MPa at room temperature. The joints by water quenching after deformation have better plasticity with an elongation up to 4.4%. After thermal exposure at 500 °C for 100 h, the tensile strength of the specimen slightly rises while the ductility changes a little. SEM observation shows that the fracture mechanism is predominantly transgranular under different deformation conditions.
文摘A more accurate analysis method on working modes is proposed by considering the winding terminal voltage and the eondueting power device as state parameters. For the three-phase hybrid excitation doubly salient machine （HEDSM） motor and its three-phase full-bridge inverter, in the proposed analytical method, all possible working modes are generally listed. Then, with the H_PWM-L_ON control strategy, the working modes are detailed with eorresponding equivalent circuits. Experimental results verify the robustness of the analysis.
基金Projects (50935007,51205317) supported by the National Natural Science Foundation of ChinaProject (2010CB731701) supported by the National Basic Research Program of ChinaProject (B08040) supported by Research Fund of the 111 Project
文摘The role of subtransus hot working on microstructure morphology of TA15 titanium alloy plate with elongatedαphases was studied by quantitative metallography on different sections. The results show that the microstructure morphology is mainly affected by loading direction. When the sample is compressed along normal direction, microstructure on the section vertical to normal direction has equiaxed primaryαphase but microstructure on the section vertical to rolling direction has strip primaryαphase with long axis along tangential direction. When the sample is compressed along rolling direction, microstructure on the section vertical to normal direction has strip primaryαphase elongated along tangential direction but microstructure on the section vertical to rolling direction consists of strip and irregular broad-band primaryαphase. The strip primaryαphase aspect ratio is smaller at lower temperature due to the dynamic break-down ofαphase. The difference on primaryαphase aspect ratio between different sections decreases after compression along distinct directions in two loading passes, suggesting the improvement of equiaxity of primaryαphase.
