Aiming to solve the problem of large discharge and severe pollution of reactive dyeing wastewater for wool fabrics,peroxodisulfate(SPS)was used for the degradation and recycling of dyeing wastewater containing reactiv...Aiming to solve the problem of large discharge and severe pollution of reactive dyeing wastewater for wool fabrics,peroxodisulfate(SPS)was used for the degradation and recycling of dyeing wastewater containing reactive dye Lanasol Red CE.The process of degrading the reactive dye was determined by using the dye residual rate as the evaluation index.The feasibility of reactive dyeing of wool fabrics using recycled dyeing wastewater was confirmed by measuring the dye uptake,exhaustion and fixation rates,as well as color parameters and fastness of the dyed fabrics.The results showed that the appropriate conditions for degrading Lanasol Red CE were 0.2 g/L SPS,an initial pH value of 3 and 100℃for 30 min.Under these conditions,the dye degradation rate was as high as 93.14%.When the recycled dyeing wastewater was used for dyeing of wool fabrics,the exhaustion rate of Lanasol Red CE exceeded 99%,and the fixation rate was higher than that achieved by the conventional dyeing process.Under the same dyeing conditions,the recycled-dyed fabrics appeared darker.When the number of cycles was fewer than five,the effect on color fastness was not obvious.Although the color fastness to rubbing and washing of the fabrics dyed in the 10th cycle decreased by half a grade and 1 grade,respectively,compared to that of the fabrics dyed with the conventional dyeing process,they still met the production requirements.展开更多
Natural dyestuff of luteolin was isolated and used to dye wool fabric in this paper. Ethanol extraction and high-speed countercurrent chromatography (HSCCC) were used to extract and purify the luteolin from the peanut...Natural dyestuff of luteolin was isolated and used to dye wool fabric in this paper. Ethanol extraction and high-speed countercurrent chromatography (HSCCC) were used to extract and purify the luteolin from the peanut shell, and the structure of the isolated luteolin was characterized with FTIR techniques. The interaction between dyestuff and fiber was preliminarily discussed through thermodynamic study and supramolecular structure simulation to explain the intrinsic reasons why the color fastness was low when luteolin was applied to dyeing wool fabric. The extraction condition and purification parameter were as follows: 65% ethanol, ratio of material to liquid 1:20, 80°C, 3 h, chloroform-methanol-water (4/3/2, V/V), 800 rmp/min, 2.0 Mkpa, 0.5 mL/ min and 280 nm. The results of dyeing thermodynamics showed that the sorption isotherm of luteolin on wool fabric was consistent with Nernst model and similar to the disperse dyestuff. With molecular simulation, luteolin and glycin composed 8 stable complexes whose Laplacian values all were greater than 0, which suggested typical hydrogen bonds existing. The complex with three hydrogen bonds was proved the most stable. Both studies on thermodynamics and supramolecular simulation revealed that luteolin on wool fabric mainly depended on the weak hydrogen bonds interaction that determined the low dyefastness.展开更多
This study compares the test results of the FAST (Fabric Assurance by Simple Testing) with those of the KES - F (Kawabata Evaluation Systems for Fabrics) for a range of nineteen light weight wool and wool blend fabric...This study compares the test results of the FAST (Fabric Assurance by Simple Testing) with those of the KES - F (Kawabata Evaluation Systems for Fabrics) for a range of nineteen light weight wool and wool blend fabrics in terms of the low - stress mechanical properties of bending, shear, and tensile deformation. It is found that there are very significant correlations between the corresponding parameters for extensibility and shear rigidity obtained from the test results of the two systems. The correlation between the values of bending rigidity obtained from the two systems is only moderate. Furthermore, for the fabrics tested in this study, the values of bending rigidity, shear rigidity, and extensibility measured using the KES - F instruments are higher than those of the corresponding parameters measured using the FAST instruments. The linear regression equation is given for each pair of corresponding parameter.展开更多
The wool fabrics were treated with low temperature plasma (LTP) using three different gases, namely (ⅰ) oxygen, (ⅱ) nitrogen and (ⅲ) 25％ hydrogen/75％ nitrogen gas mixture. After LTP treatment, the low stress mech...The wool fabrics were treated with low temperature plasma (LTP) using three different gases, namely (ⅰ) oxygen, (ⅱ) nitrogen and (ⅲ) 25％ hydrogen/75％ nitrogen gas mixture. After LTP treatment, the low stress mechanical properties, surface properties and thermal properties of the fabrics were investigated by kES-F (Kawabata Evaluation System) Instruments composing of KES-FBI for tensile and shear property measurement, KES-FB2 for pure bending measurement, kES-FB3 for compression measurement, KES-FB4 for surface friction and surface roughness measurement, and KES-F7 for thermal property measurement. The first four instruments were used for investigating the charaeterlstlc aspect related to fabrle hand while the last one was mainly for the fabric comfort. The properties of LTP treated fabrics under the effect of different gases were compared with the untreated fabric quantitatively.展开更多
By means of measurement with the FAST instruments, the effect of commercial Synthappret BAP treatment on the tailorability of light-weight wool worsted fabrics has been investigated. It was found that the commercial S...By means of measurement with the FAST instruments, the effect of commercial Synthappret BAP treatment on the tailorability of light-weight wool worsted fabrics has been investigated. It was found that the commercial Synthappret BAP treatment unproved the tailorability of the light-weight wool fabrics mainly by increasing the bending stiffness of the light-weight wool fabrics.展开更多
In this paper,a new resin called Resin M for imparting antifelting properties to wool fabricshas been studied.Resin M may be used by aqueous oxidative/polymer technique.It is provedthat Oxidant A/Resin M treatment can...In this paper,a new resin called Resin M for imparting antifelting properties to wool fabricshas been studied.Resin M may be used by aqueous oxidative/polymer technique.It is provedthat Oxidant A/Resin M treatment can satisfy the machine washable requirement formulated byI.W.S..Resin M is a good agent for antifelting treatment of wool fabrics with proper pretreatment.Oxidant A/Resin M treatment has little influence on dyeing and moisture adsorption properties ofwool fibers.The pilling resistance of the treated fabrics is higher than that of the untreated ones.The strength and the handle of the treated fabrics have little been changed.According to thescanning electron microscope observations,it is recommended that the polymer encapsulation ofindividual fiber also plays an important role in the felting resistance of the treated fabrics though itis well known that the shrink resistance of the treated fabrics is believed to be due to the binding offibers.展开更多
This article describes the synthesis of some novel coumarin compounds to use as acid dyes by using compounds 1 - 4 as starting materials, which were prepared by interaction of 2-hydroxybenzaldehyde with ethyl 3-oxobut...This article describes the synthesis of some novel coumarin compounds to use as acid dyes by using compounds 1 - 4 as starting materials, which were prepared by interaction of 2-hydroxybenzaldehyde with ethyl 3-oxobutanoate, diethylmalonate, 4-nitrobenzenediazonium chloride and 4-sulfobenzenediazonium chloride, respectively. Compound 1 reacted with bromine and 2-cyanoacetohydrazide to give phenacyl bromide derivative 5 and 2-cyanoacetohydrazone derivative 6, respectively. Coupling of compound 6 with equimolar amount of 2-sulfo-4-((4-sulfophenyl) diazenyl)benzenediazonium chloride gave coumarin acid dye 8. Phenacyl bromide derivative 5 re-acted with potassium cyanide in refluxing ethanol to produce compound 7, which on coupling with equimolar amount of 8-hydroxy-6-sulfonaphthalene-2-diazonium chloride and 8-hydroxy-3,6-disulfonaphthalene-1-diazonium chloride gave coumarin acid dyes 9 and 10, respectively. Interaction of compound 2 with 2-amino-5-((4-sulfophenyl)diazenyl)benzenesulfonic acid, benzene-1,4-diamine and 3,3’-dimethoxy-[1,1’-biphenyl]-4,4’-diamine in refluxing ethanol afforded compounds 11, 12 and 14, respectively. Diazonium sulphate of compounds 12 and 14 coupling with 4-amino-5-hydroxynaphthalene-2,7-disulfonic acid gave compounds 13 and 15, respectively. Cyclocondensation of compound 3 with ethyl 3-oxobutanoate, diethyl malonate and malononitrile afforded derivatives of 3-acetyl-2H-chromen-2-one 16, ethyl 2-oxo-2H-chromene-3-carboxylate 17 and 2-imino-2H-chromene-3-carbonitrile 18, respectively. Reaction of sodium benzenesulfonate derivative 4 with ethyl 3-oxobutanoate and hydrazine hydrate gave compounds 19 and 20, respectively. The structures of the newly synthesized compounds were confirmed by elemental analysis, UV/ VIS, IR, 1H NMR and Ms spectral data. The suitability of the prepared dyestuffs for dyeing of wool and silk fabrics has been investigated. The dyed fabric shows good light fastness, very good rubbing, perspiration, washing and excellent sublimation fastness. These dyes have been color shade from blue to violet with very good depth and levelness on fabrics. The dye bath exhaustion and fixation on fabric has been found to be very good.展开更多
In this study,we used citric acid(CA)as a crosslinking agent,mixed with polyhexamethylene biguanide,to perform a pad-dry-cure treatment on wool fabrics to study its antimicrobial effects and physical properties.
Using the forearm test, the prickle of 26 commercially available light-weight worsted woven wool fabrics and 7 other fiber fabrics were studied under (24±1)℃ temperature and (65±5)% RH conditions. The surfa...Using the forearm test, the prickle of 26 commercially available light-weight worsted woven wool fabrics and 7 other fiber fabrics were studied under (24±1)℃ temperature and (65±5)% RH conditions. The surface fiber diameter of part of the wool fabrics was measured using a microscope. It was found that most of the light-weight worsted woven wool fabrics gave a prickle sensation under the above conditions. The prickle sensation was significantly correlated with the mean fiber diameter of the surface hairiness. It was also found that the prickle of the light-weight worsted woven wool fabrics was significantly correlated with the number of surface fibers which were coarser than 26 μm diameter.展开更多
The use of Dioscorea cirrhosa Lour.in the dyeing of leather and silk have been some 2000 years in China as the natural coloration.Power ultrasound has been explored in the textile coloration.This article aimed at rese...The use of Dioscorea cirrhosa Lour.in the dyeing of leather and silk have been some 2000 years in China as the natural coloration.Power ultrasound has been explored in the textile coloration.This article aimed at researching the ultrasonic efficiency for dyeing wool fabric with Dioscorea cirrhosa Lour.dye in comparison with conventional heating.We get a significant improvement in the color strength values(K/S) at the same condition.The fastness and extent properties of the fabrics treated by ultrasonic were better than those obtained when treated by conventional heating.展开更多
Many of us have the feeling: you step out in a T-shirt on a summer day, and within twenty minutes, your underarms feel damp. There are sweat marks on the clothes, and they are clearly visible. While many debate the me...Many of us have the feeling: you step out in a T-shirt on a summer day, and within twenty minutes, your underarms feel damp. There are sweat marks on the clothes, and they are clearly visible. While many debate the merits of polyester fabric with cool-touch feelingversus cotton as temperatures soar, the apparel world is quietly experiencing a "merino wool trend." A lot of major brands are launching merino wool short-sleeve tees.展开更多
Aiming at the problem that back propagation(BP)neural network predicts the low accuracy rate of fluff fabric after fluffing process,a BP neural network model optimized by particle swarm optimization(PSO)algorithm is p...Aiming at the problem that back propagation(BP)neural network predicts the low accuracy rate of fluff fabric after fluffing process,a BP neural network model optimized by particle swarm optimization(PSO)algorithm is proposed.The sliced image is obtained by the principle of light-cutting imaging.The fluffy region of the adaptive image segmentation is extracted by the Freeman chain code principle.The upper edge coordinate information of the fabric is subjected to one-dimensional discrete wavelet decomposition to obtain high frequency information and low frequency information.After comparison and analysis,the BP neural network was trained by high frequency information,and the PSO algorithm was used to optimize the BP neural network.The optimized BP neural network has better weights and thresholds.The experimental results show that the accuracy of the optimized BP neural network after applying high-frequency information training is 97.96%,which is 3.79%higher than that of the unoptimized BP neural network,and has higher detection accuracy.展开更多
In this article, winter clothes, bedding, pillows, mattresses are produced in the Republic of Uzbekistan and used in the export products of foreign countries in domestic market shopping centers;existing nonwoven fabri...In this article, winter clothes, bedding, pillows, mattresses are produced in the Republic of Uzbekistan and used in the export products of foreign countries in domestic market shopping centers;existing nonwoven fabric samples were used as toys, children’s clothing as a heat retainer, a space-filler was selected on the basis of marketing survey analysis. Chemical bonding, processing technology, methods, linear density, thickness, air permeability, hygroscopicity, heat storage and heat transfer properties of the samples were analyzed experimentally based on the preparation methods, the fiber content was compared with the standard technology. The advantages and disadvantages of the samples were studied and recommendations for use in sewing according to consumer requirements were given.展开更多
Plasma etching technique used in the modification of fibres,yarns and fabrics of wool is re-ported.The experimental results show that the method is useful for improving wettability and re-ducing shrinkage of wool,it m...Plasma etching technique used in the modification of fibres,yarns and fabrics of wool is re-ported.The experimental results show that the method is useful for improving wettability and re-ducing shrinkage of wool,it may be used to increase the strength of tops and yarns,and to enhancethe hand and colour of the final products.In addition,the characteristic features of the plasmamodified wool and discussions of possible mechanisms of the action are presented.展开更多
In order to improve the accuracy of using visual methods to detect the quality of fluff fabrics,based on the previous research,this paper proposes a method of rapid classification detection using support vector machin...In order to improve the accuracy of using visual methods to detect the quality of fluff fabrics,based on the previous research,this paper proposes a method of rapid classification detection using support vector machine(SVM).The fabric image is acquired by the principle of light-cut imaging,and the region of interest is extracted by the method of grayscale horizontal projection.The obtained coordinates of the upper edge of the fabric are decomposed into high frequency information and low frequency information by wavelet transform,and the high frequency information is used as a data set for training.After experimental comparison and analysis,the detection rate of the SVM method proposed in this paper is higher than the previously proposed back propagation(BP)neural network and particle swarm optimization BP(PSO-BP)neural network detection methods,and the accuracy rate can reach 99.41%,which can meet the needs of industrial testing.展开更多
基金Youth Foundation of Hebei Province Department of Education Fund,China(No.QN2023090)Opening Project of Textile Ecological Dyeing and Finishing Key Laboratory of Sichuan Province(Chengdu Textile College),China(No.2024DF-AO2)Innovation and Entrepreneurship Training Program for College Students,China(No.202410082023)。
文摘Aiming to solve the problem of large discharge and severe pollution of reactive dyeing wastewater for wool fabrics,peroxodisulfate(SPS)was used for the degradation and recycling of dyeing wastewater containing reactive dye Lanasol Red CE.The process of degrading the reactive dye was determined by using the dye residual rate as the evaluation index.The feasibility of reactive dyeing of wool fabrics using recycled dyeing wastewater was confirmed by measuring the dye uptake,exhaustion and fixation rates,as well as color parameters and fastness of the dyed fabrics.The results showed that the appropriate conditions for degrading Lanasol Red CE were 0.2 g/L SPS,an initial pH value of 3 and 100℃for 30 min.Under these conditions,the dye degradation rate was as high as 93.14%.When the recycled dyeing wastewater was used for dyeing of wool fabrics,the exhaustion rate of Lanasol Red CE exceeded 99%,and the fixation rate was higher than that achieved by the conventional dyeing process.Under the same dyeing conditions,the recycled-dyed fabrics appeared darker.When the number of cycles was fewer than five,the effect on color fastness was not obvious.Although the color fastness to rubbing and washing of the fabrics dyed in the 10th cycle decreased by half a grade and 1 grade,respectively,compared to that of the fabrics dyed with the conventional dyeing process,they still met the production requirements.
文摘Natural dyestuff of luteolin was isolated and used to dye wool fabric in this paper. Ethanol extraction and high-speed countercurrent chromatography (HSCCC) were used to extract and purify the luteolin from the peanut shell, and the structure of the isolated luteolin was characterized with FTIR techniques. The interaction between dyestuff and fiber was preliminarily discussed through thermodynamic study and supramolecular structure simulation to explain the intrinsic reasons why the color fastness was low when luteolin was applied to dyeing wool fabric. The extraction condition and purification parameter were as follows: 65% ethanol, ratio of material to liquid 1:20, 80°C, 3 h, chloroform-methanol-water (4/3/2, V/V), 800 rmp/min, 2.0 Mkpa, 0.5 mL/ min and 280 nm. The results of dyeing thermodynamics showed that the sorption isotherm of luteolin on wool fabric was consistent with Nernst model and similar to the disperse dyestuff. With molecular simulation, luteolin and glycin composed 8 stable complexes whose Laplacian values all were greater than 0, which suggested typical hydrogen bonds existing. The complex with three hydrogen bonds was proved the most stable. Both studies on thermodynamics and supramolecular simulation revealed that luteolin on wool fabric mainly depended on the weak hydrogen bonds interaction that determined the low dyefastness.
基金This project was generously funded by International Wool Secretariat
文摘This study compares the test results of the FAST (Fabric Assurance by Simple Testing) with those of the KES - F (Kawabata Evaluation Systems for Fabrics) for a range of nineteen light weight wool and wool blend fabrics in terms of the low - stress mechanical properties of bending, shear, and tensile deformation. It is found that there are very significant correlations between the corresponding parameters for extensibility and shear rigidity obtained from the test results of the two systems. The correlation between the values of bending rigidity obtained from the two systems is only moderate. Furthermore, for the fabrics tested in this study, the values of bending rigidity, shear rigidity, and extensibility measured using the KES - F instruments are higher than those of the corresponding parameters measured using the FAST instruments. The linear regression equation is given for each pair of corresponding parameter.
文摘The wool fabrics were treated with low temperature plasma (LTP) using three different gases, namely (ⅰ) oxygen, (ⅱ) nitrogen and (ⅲ) 25％ hydrogen/75％ nitrogen gas mixture. After LTP treatment, the low stress mechanical properties, surface properties and thermal properties of the fabrics were investigated by kES-F (Kawabata Evaluation System) Instruments composing of KES-FBI for tensile and shear property measurement, KES-FB2 for pure bending measurement, kES-FB3 for compression measurement, KES-FB4 for surface friction and surface roughness measurement, and KES-F7 for thermal property measurement. The first four instruments were used for investigating the charaeterlstlc aspect related to fabrle hand while the last one was mainly for the fabric comfort. The properties of LTP treated fabrics under the effect of different gases were compared with the untreated fabric quantitatively.
基金This project was generously funded by International Wool Secretariat.
文摘By means of measurement with the FAST instruments, the effect of commercial Synthappret BAP treatment on the tailorability of light-weight wool worsted fabrics has been investigated. It was found that the commercial Synthappret BAP treatment unproved the tailorability of the light-weight wool fabrics mainly by increasing the bending stiffness of the light-weight wool fabrics.
文摘In this paper,a new resin called Resin M for imparting antifelting properties to wool fabricshas been studied.Resin M may be used by aqueous oxidative/polymer technique.It is provedthat Oxidant A/Resin M treatment can satisfy the machine washable requirement formulated byI.W.S..Resin M is a good agent for antifelting treatment of wool fabrics with proper pretreatment.Oxidant A/Resin M treatment has little influence on dyeing and moisture adsorption properties ofwool fibers.The pilling resistance of the treated fabrics is higher than that of the untreated ones.The strength and the handle of the treated fabrics have little been changed.According to thescanning electron microscope observations,it is recommended that the polymer encapsulation ofindividual fiber also plays an important role in the felting resistance of the treated fabrics though itis well known that the shrink resistance of the treated fabrics is believed to be due to the binding offibers.
文摘This article describes the synthesis of some novel coumarin compounds to use as acid dyes by using compounds 1 - 4 as starting materials, which were prepared by interaction of 2-hydroxybenzaldehyde with ethyl 3-oxobutanoate, diethylmalonate, 4-nitrobenzenediazonium chloride and 4-sulfobenzenediazonium chloride, respectively. Compound 1 reacted with bromine and 2-cyanoacetohydrazide to give phenacyl bromide derivative 5 and 2-cyanoacetohydrazone derivative 6, respectively. Coupling of compound 6 with equimolar amount of 2-sulfo-4-((4-sulfophenyl) diazenyl)benzenediazonium chloride gave coumarin acid dye 8. Phenacyl bromide derivative 5 re-acted with potassium cyanide in refluxing ethanol to produce compound 7, which on coupling with equimolar amount of 8-hydroxy-6-sulfonaphthalene-2-diazonium chloride and 8-hydroxy-3,6-disulfonaphthalene-1-diazonium chloride gave coumarin acid dyes 9 and 10, respectively. Interaction of compound 2 with 2-amino-5-((4-sulfophenyl)diazenyl)benzenesulfonic acid, benzene-1,4-diamine and 3,3’-dimethoxy-[1,1’-biphenyl]-4,4’-diamine in refluxing ethanol afforded compounds 11, 12 and 14, respectively. Diazonium sulphate of compounds 12 and 14 coupling with 4-amino-5-hydroxynaphthalene-2,7-disulfonic acid gave compounds 13 and 15, respectively. Cyclocondensation of compound 3 with ethyl 3-oxobutanoate, diethyl malonate and malononitrile afforded derivatives of 3-acetyl-2H-chromen-2-one 16, ethyl 2-oxo-2H-chromene-3-carboxylate 17 and 2-imino-2H-chromene-3-carbonitrile 18, respectively. Reaction of sodium benzenesulfonate derivative 4 with ethyl 3-oxobutanoate and hydrazine hydrate gave compounds 19 and 20, respectively. The structures of the newly synthesized compounds were confirmed by elemental analysis, UV/ VIS, IR, 1H NMR and Ms spectral data. The suitability of the prepared dyestuffs for dyeing of wool and silk fabrics has been investigated. The dyed fabric shows good light fastness, very good rubbing, perspiration, washing and excellent sublimation fastness. These dyes have been color shade from blue to violet with very good depth and levelness on fabrics. The dye bath exhaustion and fixation on fabric has been found to be very good.
文摘In this study,we used citric acid(CA)as a crosslinking agent,mixed with polyhexamethylene biguanide,to perform a pad-dry-cure treatment on wool fabrics to study its antimicrobial effects and physical properties.
文摘Using the forearm test, the prickle of 26 commercially available light-weight worsted woven wool fabrics and 7 other fiber fabrics were studied under (24±1)℃ temperature and (65±5)% RH conditions. The surface fiber diameter of part of the wool fabrics was measured using a microscope. It was found that most of the light-weight worsted woven wool fabrics gave a prickle sensation under the above conditions. The prickle sensation was significantly correlated with the mean fiber diameter of the surface hairiness. It was also found that the prickle of the light-weight worsted woven wool fabrics was significantly correlated with the number of surface fibers which were coarser than 26 μm diameter.
文摘The use of Dioscorea cirrhosa Lour.in the dyeing of leather and silk have been some 2000 years in China as the natural coloration.Power ultrasound has been explored in the textile coloration.This article aimed at researching the ultrasonic efficiency for dyeing wool fabric with Dioscorea cirrhosa Lour.dye in comparison with conventional heating.We get a significant improvement in the color strength values(K/S) at the same condition.The fastness and extent properties of the fabrics treated by ultrasonic were better than those obtained when treated by conventional heating.
文摘Many of us have the feeling: you step out in a T-shirt on a summer day, and within twenty minutes, your underarms feel damp. There are sweat marks on the clothes, and they are clearly visible. While many debate the merits of polyester fabric with cool-touch feelingversus cotton as temperatures soar, the apparel world is quietly experiencing a "merino wool trend." A lot of major brands are launching merino wool short-sleeve tees.
基金Natural Science Basic Research Plan in Shaanxi Province of China(No.2017JM5141)Shaanxi Provincial Education Department,China(No.17JK0334)+2 种基金Xi’an Polytechnic University Graduate Innovation Fund,China(No.chx2019083)Xi’an Science and Technology Bureau for Research Plan,China(No.201805030YD8CG14(5))Science Foundation for Doctorate Research of Xi’an Polytechnic University,China(No.BS1535)
文摘Aiming at the problem that back propagation(BP)neural network predicts the low accuracy rate of fluff fabric after fluffing process,a BP neural network model optimized by particle swarm optimization(PSO)algorithm is proposed.The sliced image is obtained by the principle of light-cutting imaging.The fluffy region of the adaptive image segmentation is extracted by the Freeman chain code principle.The upper edge coordinate information of the fabric is subjected to one-dimensional discrete wavelet decomposition to obtain high frequency information and low frequency information.After comparison and analysis,the BP neural network was trained by high frequency information,and the PSO algorithm was used to optimize the BP neural network.The optimized BP neural network has better weights and thresholds.The experimental results show that the accuracy of the optimized BP neural network after applying high-frequency information training is 97.96%,which is 3.79%higher than that of the unoptimized BP neural network,and has higher detection accuracy.
文摘In this article, winter clothes, bedding, pillows, mattresses are produced in the Republic of Uzbekistan and used in the export products of foreign countries in domestic market shopping centers;existing nonwoven fabric samples were used as toys, children’s clothing as a heat retainer, a space-filler was selected on the basis of marketing survey analysis. Chemical bonding, processing technology, methods, linear density, thickness, air permeability, hygroscopicity, heat storage and heat transfer properties of the samples were analyzed experimentally based on the preparation methods, the fiber content was compared with the standard technology. The advantages and disadvantages of the samples were studied and recommendations for use in sewing according to consumer requirements were given.
文摘Plasma etching technique used in the modification of fibres,yarns and fabrics of wool is re-ported.The experimental results show that the method is useful for improving wettability and re-ducing shrinkage of wool,it may be used to increase the strength of tops and yarns,and to enhancethe hand and colour of the final products.In addition,the characteristic features of the plasmamodified wool and discussions of possible mechanisms of the action are presented.
基金National Natural Science Foundation of China(No.61701384)Natural Science Basic Research Plan in Shaanxi Province of China(No.2017JM5141)+5 种基金Shaanxi Provincial Education Department,China(No.17JK0334)Xi'an Polytechnic University Graduate Innovation Fund,China(No.chx2019083)Science Foundation for Doctorate Research of Xi'an Polytechnic University,China(No.BS1535)Key Research and Development Program of Shaanxi,China(No.2020GY-172)Technology Innovation Leading Program of Xi'an,China(No.201805030YD8CG14(5))Xi'an Key Laboratory of Modern Intelligent Textile Equipment,China(No.2019220614SYS021CG043)。
文摘In order to improve the accuracy of using visual methods to detect the quality of fluff fabrics,based on the previous research,this paper proposes a method of rapid classification detection using support vector machine(SVM).The fabric image is acquired by the principle of light-cut imaging,and the region of interest is extracted by the method of grayscale horizontal projection.The obtained coordinates of the upper edge of the fabric are decomposed into high frequency information and low frequency information by wavelet transform,and the high frequency information is used as a data set for training.After experimental comparison and analysis,the detection rate of the SVM method proposed in this paper is higher than the previously proposed back propagation(BP)neural network and particle swarm optimization BP(PSO-BP)neural network detection methods,and the accuracy rate can reach 99.41%,which can meet the needs of industrial testing.
