We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based im...We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based imaging with sub-micrometer spatial and femtosecond temporal resolution,supported by hydrodynamic and particle-in-cell simulations,we reveal how return current density depends precisely on wire diameter,material properties,and incident laser energy.We identify deviations from simple theoretical predictions due to geometrically influenced electron escape dynamics.These results refine and confirm the scaling laws essential for predictive modeling in high-energy-density physics and inertial fusion research.展开更多
In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires...In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires.Microstructure and property analyses in both the cold-drawn and annealed states show that the incorporation of graphene significantly improves the ductility and electrical conductivity of the copper wire.After annealing at 350℃ for 30 minutes,the composite wire demonstrates a tensile strength of 270 MPa and an electrical conductivity of 102.74%IACS,both superior to those of pure copper wire under identical conditions.At 150℃,the electrical conductivity of the annealed composite wire reaches 72.60%IACS,notably higher than the 68.19%IACS of pure copper.The results suggest that graphene is uniformly distributed within the composite wire,with minimal impact on conductivity,while effectively refining the copper grain structure to enhance ductility.Moreover,graphene suppresses copper lattice vibrations at elevated temperatures,reducing the rate of conductivity degradation.展开更多
Wired drill pipe（WDP）technology is one of the most promising data acquisition technologies in today s oil and gas industry.For the first time it allows sensors to be positioned along the drill string which enables c...Wired drill pipe（WDP）technology is one of the most promising data acquisition technologies in today s oil and gas industry.For the first time it allows sensors to be positioned along the drill string which enables collecting and transmitting valuable data not only from the bottom hole assembly（BHA）,but also along the entire length of the wellbore to the drill floor.The technology has received industry acceptance as a viable alternative to the typical logging while drilling（LWD）method.Recently more and more WDP applications can be found in the challenging drilling environments around the world,leading to many innovations to the industry.Nevertheless most of the data acquired from WDP can be noisy and in some circumstances of very poor quality.Diverse factors contribute to the poor data quality.Most common sources include mis-calibrated sensors,sensor drifting,errors during data transmission,or some abnormal conditions in the well,etc.The challenge of improving the data quality has attracted more and more focus from many researchers during the past decade.This paper has proposed a promising solution to address such challenge by making corrections of the raw WDP data and estimating unmeasurable parameters to reveal downhole behaviors.An advanced data processing method,data validation and reconciliation（DVR）has been employed,which makes use of the redundant data from multiple WDP sensors to filter/remove the noise from the measurements and ensures the coherence of all sensors and models.Moreover it has the ability to distinguish the accurate measurements from the inaccurate ones.In addition,the data with improved quality can be used for estimating some crucial parameters in the drilling process which are unmeasurable in the first place,hence provide better model calibrations for integrated well planning and realtime operations.展开更多
Using the adoption and expansion of wired telegraph in China during the late 19^(th) century,this paper investigates the effect of cost reductions for knowledge exchange on China’s industrial growth before the outbre...Using the adoption and expansion of wired telegraph in China during the late 19^(th) century,this paper investigates the effect of cost reductions for knowledge exchange on China’s industrial growth before the outbreak of the War of Resistance Against Japanese Aggression(1931-1945),thus testing Baldwin’s theory of“the Great Convergence”in which developing countries are empowered by information and communication technologies.Based on panel data of 1858-1937,we found that wired telegraph access had a significantly positive effect,as well as a long-term growth effect,on the entry of industrial enterprises.Our mechanism analysis indicates that wired telegraph access accelerated early-stage industrialization in localities by encouraging market integration,human capital accumulation,and auxiliary commercial organizations.Only a few countries firmly asserted their telegraph sovereignty and set up their own workforce educational system during telegraph adoption.This explains why the Great Convergence arising from technology importation only occurred in a small number of countries.Our findings contribute to understanding the source of China’s modern industrial progress,as well as why global inequities remain.展开更多
Based on comprehensive observations of 20 wire icing events during winter from 2019 to 2021,we investigated the characteristics of the icing properties,the atmospheric boundary layer structure,the raindrop size distri...Based on comprehensive observations of 20 wire icing events during winter from 2019 to 2021,we investigated the characteristics of the icing properties,the atmospheric boundary layer structure,the raindrop size distribution,and their associated effects on the ice accretion mechanism in the mountainous region of Southwest China.The maximum ice weight was positively correlated with the duration of ice accretion in the mountainous area.The duration of precipitation accounted for less than 20%of the icing period in the mountainous area,with solid-phase hydrometeors being predominant.Icing events,dominated by freezing rain(FR)and mixed rain–graupel(more than 70%),were characterized by glaze or highdensity mixed icing.The relationship between the melting energy and refreezing energy reflected the distribution characteristics of the proportion of FR under mixed-phase precipitation.The intensity of the warm layer and the dominant precipitation phase significantly affected the variations in the microphysical properties of FR.The melting of large dry snowflakes significantly contributed to FR in the mountainous areas,resulting in smaller generalized intercepts and larger mass-weighted mean diameters in the presence of a stronger warm layer.Under a weaker warm layer,the value of the massweighted mean diameter was significantly smaller because of the inability of large solid particles to melt.Finally,FR in the mountainous area dominated the ice weight during the rapid ice accumulation period.A numerical simulation of FR icing on wires effectively revealed the evolution of disaster-causing icing in mountainous areas.展开更多
The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully ci...The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),respectively.With the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire deposits.Microstructure characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α phases.The mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and discussed.The mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat treatment.No fracture occurred within the interfacial area,further suggesting the robust interface.The findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.展开更多
SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+...SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.展开更多
The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the micr...The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the microstructure feature,texture evolution,mechanical properties,and electrical conductivity of ultrafine wires ranging fromΦ361μm toΦ18μm is performed.Specially,the microstructure feature and texture type covering the whole longitudinal section of ultrafine wires are elaborately characterized.The results show that the average lamella thickness decreases from 1.63μm to 102 nm during the drawing process.Whereas,inhomogeneous texture evolution across different wire sections was observed.The main texture types of copper wires are comprised of<111>,<001>and<112>orientations.Specifically,the peripheral region is primarily dominated by<111>and<112>,while the central region is dominated by<001>and<111>.As the drawing strain increases,the volume fraction of hard orientation<111>with low Schmid factor increases,where notably higher fraction of<111>is resulted from the consumption of<112>and<001>for the wire ofΦ18μm.For drawn copper wire of 18μm,superior properties are obtained with a tensile strength of 729.8 MPa and an electrical conductivity of 86.9%IACS.Furthermore,it is found that grain strengthening,dislocation strengthening,and texture strengthening are three primary strengthening mechanisms of drawn copper wire,while the dislocation density is the main factor on the reducing of conductivity.展开更多
The Kirschner wire(K-wire)is widely used in orthopedic external fixation due to its versatility and clinical effectiveness.However,a significant challenge associated with its use is the potential for bacterial migrati...The Kirschner wire(K-wire)is widely used in orthopedic external fixation due to its versatility and clinical effectiveness.However,a significant challenge associated with its use is the potential for bacterial migration,subsequent infection,and dislodgement as the wire penetrates the skin and bone.This study introduces a novel bioactive material,selenium/calcium silicate(Se/β-CS),achieved by integrating selenium-an essential trace element in the human body-into bioceramic calcium silicate.This integration was accomplished using a combined chemical co-deposition method and redox reaction.Furthermore,a uniform and controllable Se/β-CS coating was applied to the K-wire's surface using the Langmuir-Blodgett technique.This coating gradually releases active components-Si,Ca,and Se-that effectively eliminate bacterial infections and promote osteointegration.The findings of this study offer promising opportunities for the use of robust and multifunctional coating materials on implantable devices,particularly within the fields of orthopedics,transplantation,and surgery.展开更多
Simultaneously improving the strength and electrical conductivity of conducting metallic materials is of great significance,but it still remains a key challenge as the two properties are often mutually exclusive.In th...Simultaneously improving the strength and electrical conductivity of conducting metallic materials is of great significance,but it still remains a key challenge as the two properties are often mutually exclusive.In this study,we demonstrate a“<111>oriented fibrous grains with ultra-high aspect ratio”strategy for breaking such a conflict in Cu wire,which relies on the distinctive spatial distribution of grain boundaries and the highly consistent hard orientation to play their respective roles in suffering loading and conducting,thereby enabling a separate optimization of both strength and electrical conductivity.Therefore,a processing route was designed,involving directional solidification followed by large drawing deformation,to successfully construct fibrous grains with an ultra-high aspect ratio in 596.7 and ultra-high<111>texture proportion over 97%,which achieves Cu wire with a remarkable combination of yield strength in 482.3 MPa and electrical conductivity in 101.63%IACS.Finally,the mechanisms for high strength and high electrical conductivity were quantitatively discussed.展开更多
To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-coolin...To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-cooling recovery stress tests on SMA wire under varying initial strain conditions.The effects of various strains and different energized heating methods on the recovery stress of SMA wires were explored in the single heating tests.The SMA wire was strained from 2%to 8%initially,and two distinct heating approaches were employed:one using a large current interval for rapid heating and one using a small current interval for slower heating.The experimental outcomes reveal that during a single heating cycle,the temperature-recovery stress relationship of SMA wire exhibits three distinct stages:the martensite phase stage,the transition stage from martensite to austenite phase,and the austenite phase stage.Notably,the choice of heating method does not influence the maximum recovery stress value,and the correlation between initial strain and maximum recovery stress is predominantly linear.Moreover,conducting the reciprocating temperature rise and fall performance test is important to better simulate the scenario in practical engineering where multiple recovery stress in SMA wires for structural repair.In this test,two temperature cycling methods were studied:interval rise and fall,as well as direct rise and fall.In the case of utilizing the interval temperature rise and fall method,it was observed that the recovery stress associated with cooling was significantly higher than that corresponding to heating at the same temperature.Furthermore,the recovery stress was lower upon subsequent heating than that measured during the previous heating cycle.Based on the experimental results,a prediction model for the temperature-recovery stress relationship has been proposed to simplify numerical calculations.It is hoped that an approximate temperaturerecovery stress curve can be obtained from the parameters of the SMA wire.The calculated values derived from this model show good alignment with the measured values,indicating its reliability.展开更多
Inside a small shop on Lhasa's Barkhor Street,Namgyal Dorje,a young man born after 1995,delicately embeds copper wire across a wooden board.Although not born into a traditi onal Thangka pain ting family,Namgyal Do...Inside a small shop on Lhasa's Barkhor Street,Namgyal Dorje,a young man born after 1995,delicately embeds copper wire across a wooden board.Although not born into a traditi onal Thangka pain ting family,Namgyal Dorje uses copper wire and enamel glaze to push the boundaries of traditional Thangka art-both in innovation and accessibility.展开更多
Buckling failure in submarine cables presents a prevalent challenge in ocean engineering.This work aims to explore the buckling behavior of umbilical cables with damaged sheaths subjected to compression and bending cy...Buckling failure in submarine cables presents a prevalent challenge in ocean engineering.This work aims to explore the buckling behavior of umbilical cables with damaged sheaths subjected to compression and bending cyclic loads.A finite element model is devised,incorporating a singular armor wire,a rigid core,and a damaged sheath.To scrutinize the buckling progression and corresponding deformation,axial compression and bending cyclic loads are introduced.The observations reveal that a reduction in axial compression results in a larger number of cycles before buckling ensues and progressively shifts the buckling position toward the extrados and fixed end.Decreasing the bending radius precipitates a reduction in the buckling cycle number and minimizes the deformation in the armor wire.Furthermore,an empirical model is presented to predict the occurrence of birdcage buckling,providing a means to anticipate buckling events and to estimate the requisite number of cycles leading to buckling.展开更多
Ti-6Al-4V(Ti64)alloys are widely used in the aerospace and automotive industries owing to their excellent high-temperature mechanical properties.This study investigated the creep behavior of Ti64 samples with ultra-lo...Ti-6Al-4V(Ti64)alloys are widely used in the aerospace and automotive industries owing to their excellent high-temperature mechanical properties.This study investigated the creep behavior of Ti64 samples with ultra-lowβcontent(<1%)fabricated by wire arc additive manufacturing(WAAM)under high-temperature and high-stress conditions.The creep properties of the WAAM Ti64 samples were evaluated at 600°C and 700°C with different stresses,and they were analyzed using electron backscattered diffraction(EBSD)and transmission electron microscopy(TEM).Commercially forged Ti64 samples were used as controls to compare their microstructures.As the stress increased,the degree of recrystallization intensified,leading to finer recrystallized grains.After high-temperature deformation,theβcontent in WAAM samples increased from less than 1%to over 8%.The dislocation density was high at low deformations,and the degree of recrystallization was low,suggesting superior creep resistance of the WAAM samples.The stress exponent,EBSD,and TEM analyses confirmed that dislocation movement primarily governs creep deformation in WAAM Ti64.Conversely,the forged samples exhibited easier deformation,lower dislocation density,higher recrystallization,and inferior creep resistance.This research highlights the impact ofβcontent and microstructure on the creep behavior of Ti64.The WAAM Ti64 with ultra-lowβcontent demonstrates enhanced creep resistance compared to commercially forged samples,primarily due to its unique microstructure with closely interconnectedαphases and lowerβ-phase content.展开更多
Combining the advantages of high efficiency,low-pressure drop,and large throughput,the pore arrayenhanced tube-in-tube microchannel(PA-TMC) is a promising microreactor for industrial applications.However,most of the m...Combining the advantages of high efficiency,low-pressure drop,and large throughput,the pore arrayenhanced tube-in-tube microchannel(PA-TMC) is a promising microreactor for industrial applications.However,most of the mass transfer takes place in the upstream pore region,while the contribution of the downstream annulus is limited.In this work,helical wires were introduced into the annulus by adhering to the outer surface of the inner tube.Mixing behavior and mass transfer of liquid-liquid twophase flow in PA-TMC with different helical wires have been systematically studied by a combination of experiments and volume of fluid(VOF) method.The introduction of helical wires improves the overall volumetric mass transfer coefficient KLa by up to 133% and the mass transfer efficiency E by up to 117%.The simulation results show that the helical wire brings extra phase mixing regions and increases the specific interface area,while accelerating the fluid flow and expanding the area of enhanced turbulent dissipation rate.Influences of helical wires in various configurations are compared by the comprehensive index I concerning the pressure drop and mass transfer performance simultaneously and a new correlation between KLa and specific energy consumption φ is proposed.This research deepens the understanding of the mixing behavior and mass transfer in the PA-TMCs and provides practical experience for the process intensification of microchannel reactors.展开更多
The deformation of Cu–20 wt.%Fe alloy wires leads to a significant improvement in mechanical properties and a decrease in electrical conductivity.Simultaneous improvements in strength and conductivity were achieved b...The deformation of Cu–20 wt.%Fe alloy wires leads to a significant improvement in mechanical properties and a decrease in electrical conductivity.Simultaneous improvements in strength and conductivity were achieved by intermediate annealing of drawn Cu–20 wt.%Fe wires.As the annealing temperature increased,the strength of Cu–20 wt.%Fe alloy wire decreased monotonically,but the electrical conductivity first increased and then decreased,reaching its peak value after annealing at 500℃.The decrease in strength is related to dislocation recovery and static recrystallization of Cu and Fe phases,and the increase in electrical conductivity mainly results from the aging precipitation of solid solution Fe.After annealing at 500℃,there was no obvious recrystallization of Cu phase,and many of the nano-Fe particles precipitated from Cu matrix.An annealing temperature of 600℃ induced the recrystallization of Cu matrix and an increase in Fe solid solubility,resulting in a decrease in strength and electrical conductivity.Subsequently,the wires annealed at 500℃ were drawn to 2 mm.Compared with those of the continuously drawn Cu–20 wt.%Fe alloy wires,the deformation ability,strength,and electrical conductivity of Cu–20 wt.%Fe alloy wires subjected to intermediate annealing treatment are significantly greater.This is mainly related to the sufficient precipitation of Fe in Cu matrix and the strengthening of refined Fe fibers parallel to the drawing direction.展开更多
A reasonable process plan is an important basis for implementing wire arc additive and subtractive hybrid manufacturing(ASHM),and a new optimization method is proposed.Firstly,the target parts and machining tools are ...A reasonable process plan is an important basis for implementing wire arc additive and subtractive hybrid manufacturing(ASHM),and a new optimization method is proposed.Firstly,the target parts and machining tools are modeled by level set functions.Secondly,the mathematical model of the additive direction optimization problem is established,and an improved particle swarm optimization algorithm is designed to decide the best additive direction.Then,the two-step strategy is used to plan the hybrid manufacturing alternating sequence.The target parts are directly divided into various processing regions;each processing region is optimized based on manufacturability and manufacturing efficiency,and the optimal hybrid manufacturing alternating sequence is obtained by merging some processing regions.Finally,the method is used to outline the process plan of the designed example model and applied to the actual hybrid manufacturing process of the model.The manufacturing result shows that the method can meet the main considerations in hybrid manufacturing.In addition,the degree of automation of process planning is high,and the dependence on manual intervention is low.展开更多
Wire arc additive manufacturing(WAAM)is one of the most promising approaches to manufacturing large and complex metal components owing to its low cost and high efficiency.However,pores and coarse columnar grains cause...Wire arc additive manufacturing(WAAM)is one of the most promising approaches to manufacturing large and complex metal components owing to its low cost and high efficiency.However,pores and coarse columnar grains caused by thermal accumulation in WAAM significantly decrease the strength and increase the anisotropy,preventing the achievement of both high strength and isotropy.In this study,the strength and anisotropy of AlMg-Sc-Zr alloys were improved by regulating heat input.The results indicated that as the heat input increased from 60 to 99 J/mm,all the components had lower porosity(lower than 0.04%),the size of the Al_(3)(Sc_(1-x),Zr_(x))phases decreased,and the number density increased.The average grain size gradually decreased,and the grain morphologies transformed from coarse equiaxed grain(CEG)+fine equiaxed grain(FEG)to FEG owing to the increase in Al_(3)(Sc_(1-x),Zr_(x))phases with increasing heat input.After heat treatment at 325℃for 6 h,high-density dispersed Al_(3)Sc phases(<10 nm)precipitated.The alloy possessed the highest strength at 79 J/mm,ultimate tensile strength(UTS)of approximately 423±3 MPa,and in-plane anisotropy of approximately 4.3%.At a heat input of 99 J/mm,the in-plane anisotropy decreased to 1.2%and UTS reached 414±5 MPa.The reduction in the CEG prolonged the crack propagation path,which improved the UTS in the vertical direction and reduced the anisotropy.Theoretical calculations indicated that the main strengthening mechanisms were solid solution and precipitation strengthening.This study lays the theoretical foundations for WAAM-processed high-strength and isotropic Al alloy components.展开更多
The article considers a relaxation of the water/polypropylene glycol-425 solution with a lower critical solution temperature(LCST)following its pulsed superheating concerning liquid-liquid and liquid-vapor equilibrium...The article considers a relaxation of the water/polypropylene glycol-425 solution with a lower critical solution temperature(LCST)following its pulsed superheating concerning liquid-liquid and liquid-vapor equilibrium lines,as well as the liquid-liquid spinodal.Superheating was performed using the pulsed heat generation method in a micro-sized wire probe.The main heating mode was the constant(over the pulse length)power mode.Characteristic heating rates ranged from 0.05×10^(5) to 2×10^(5) K/s,while the degree of superheating concerning the spinodal was up to 200 K.The temperature of spontaneous boiling-up and the amplitude of the corresponding signal were monitored as functions of the heating rate set by the power value.The results demonstrate an example of the interaction of liquidliquid and liquid-vapor phase transitions,as well as the spinodal decomposition of a solution with LCST against the background of its unstable states.We proposed a physical model to explain the minimum spontaneous boiling-up temperature revealed within a certain range of heating rates,which is not typical of completely miscible solutions.Further research will focus on establishing a general criterion for the possibility of spinodal decomposition of such solutions under the conditions of rapid heating.展开更多
Wire arc additive manufacturing(WAAM)has emerged as a promising technique for producing large-scale metal components,favoured by high deposition rates,flexibility and low cost.Despite its potential,the complexity of W...Wire arc additive manufacturing(WAAM)has emerged as a promising technique for producing large-scale metal components,favoured by high deposition rates,flexibility and low cost.Despite its potential,the complexity of WAAM processes,which involves intricate thermal dynamics,phase transitions,and metallurgical,mechanical,and chemical interactions,presents considerable challenges in final product qualities.Simulation technologies in WAAM have proven invaluable,providing accurate predictions in key areas such as material properties,defect identification,deposit morphology,and residual stress.These predictions play a critical role in optimising manufacturing strategies for the final product.This paper provides a comprehensive review of the simulation techniques applied in WAAM,tracing developments from 2013 to 2023.Initially,it analyses the current challenges faced by simulation methods in three main areas.Subsequently,the review explores the current modelling approaches and the applications of these simulations.Following this,the paper discusses the present state of WAAM simulation,identifying specific issues inherent to WAAM simulation itself.Finally,through a thorough review of existing literature and related analysis,the paper offers future perspectives on potential advancements in WAAM simulation strategies.展开更多
基金partially supported by the Center for Advanced Systems Understanding(CASUS)financed by Germany’s Federal Ministry of Education and Research(BMBF)+2 种基金the Saxon State Government out of the State Budget approved by the Saxon State Parliamentfunding from the European Union’s Just Transition Fund(JTF)within the project Röntgenlaser-Optimierung der Laserfusion(ROLF),Contract No.5086999001co-financed by the Saxon State Government out of the State Budget approved by the Saxon State Parliament.
文摘We present the first systematic experimental validation of return-current-driven cylindrical implosion scaling in micrometer-sized Cu and Al wires irradiated by J-class femtosecond laser pulses.Employing XFEL-based imaging with sub-micrometer spatial and femtosecond temporal resolution,supported by hydrodynamic and particle-in-cell simulations,we reveal how return current density depends precisely on wire diameter,material properties,and incident laser energy.We identify deviations from simple theoretical predictions due to geometrically influenced electron escape dynamics.These results refine and confirm the scaling laws essential for predictive modeling in high-energy-density physics and inertial fusion research.
基金Funded by Hunan Provincial Natural Science Foundation(No.2023JJ40074)Hunan Provincial Education Department Excellent Youth Project(No.21B0757)Hunan Provincial Engineering Technology Center(No.2022TP2036)。
文摘In this study,multilayer lamination welding was employed to prepare graphene/copper(Gr/Cu)composite billets from graphene-coated copper foils,followed by multi-pass cold drawing to produce Φ1 mm Gr/Cu composite wires.Microstructure and property analyses in both the cold-drawn and annealed states show that the incorporation of graphene significantly improves the ductility and electrical conductivity of the copper wire.After annealing at 350℃ for 30 minutes,the composite wire demonstrates a tensile strength of 270 MPa and an electrical conductivity of 102.74%IACS,both superior to those of pure copper wire under identical conditions.At 150℃,the electrical conductivity of the annealed composite wire reaches 72.60%IACS,notably higher than the 68.19%IACS of pure copper.The results suggest that graphene is uniformly distributed within the composite wire,with minimal impact on conductivity,while effectively refining the copper grain structure to enhance ductility.Moreover,graphene suppresses copper lattice vibrations at elevated temperatures,reducing the rate of conductivity degradation.
基金supported by University of Stavanger, NorwaySINTEF,the Center for Integrated Operations in the Petroleum Industry and the management of National Oilwell Varco Intelli Serv
文摘Wired drill pipe（WDP）technology is one of the most promising data acquisition technologies in today s oil and gas industry.For the first time it allows sensors to be positioned along the drill string which enables collecting and transmitting valuable data not only from the bottom hole assembly（BHA）,but also along the entire length of the wellbore to the drill floor.The technology has received industry acceptance as a viable alternative to the typical logging while drilling（LWD）method.Recently more and more WDP applications can be found in the challenging drilling environments around the world,leading to many innovations to the industry.Nevertheless most of the data acquired from WDP can be noisy and in some circumstances of very poor quality.Diverse factors contribute to the poor data quality.Most common sources include mis-calibrated sensors,sensor drifting,errors during data transmission,or some abnormal conditions in the well,etc.The challenge of improving the data quality has attracted more and more focus from many researchers during the past decade.This paper has proposed a promising solution to address such challenge by making corrections of the raw WDP data and estimating unmeasurable parameters to reveal downhole behaviors.An advanced data processing method,data validation and reconciliation（DVR）has been employed,which makes use of the redundant data from multiple WDP sensors to filter/remove the noise from the measurements and ensures the coherence of all sensors and models.Moreover it has the ability to distinguish the accurate measurements from the inaccurate ones.In addition,the data with improved quality can be used for estimating some crucial parameters in the drilling process which are unmeasurable in the first place,hence provide better model calibrations for integrated well planning and realtime operations.
基金supported by the General Project of the National Social Science Fund of China(Grant No.NSSFC)“Research on the Changes of Modern East Asian Order”(Grant No.18BSS028).
文摘Using the adoption and expansion of wired telegraph in China during the late 19^(th) century,this paper investigates the effect of cost reductions for knowledge exchange on China’s industrial growth before the outbreak of the War of Resistance Against Japanese Aggression(1931-1945),thus testing Baldwin’s theory of“the Great Convergence”in which developing countries are empowered by information and communication technologies.Based on panel data of 1858-1937,we found that wired telegraph access had a significantly positive effect,as well as a long-term growth effect,on the entry of industrial enterprises.Our mechanism analysis indicates that wired telegraph access accelerated early-stage industrialization in localities by encouraging market integration,human capital accumulation,and auxiliary commercial organizations.Only a few countries firmly asserted their telegraph sovereignty and set up their own workforce educational system during telegraph adoption.This explains why the Great Convergence arising from technology importation only occurred in a small number of countries.Our findings contribute to understanding the source of China’s modern industrial progress,as well as why global inequities remain.
基金funded by the National Natural Science Foundation of China(Grant No.42325503)the Hubei Provincial Natural Science Foundation and the Meteorological Innovation and Development Project of China(Grant Nos.2023AFD096 and 2022CFD122)+1 种基金the Natural Science Foundation of Wuhan(Grant No.2024020901030454)the Beijige Foundation of NJIAS(Grant No.BJG202304)。
文摘Based on comprehensive observations of 20 wire icing events during winter from 2019 to 2021,we investigated the characteristics of the icing properties,the atmospheric boundary layer structure,the raindrop size distribution,and their associated effects on the ice accretion mechanism in the mountainous region of Southwest China.The maximum ice weight was positively correlated with the duration of ice accretion in the mountainous area.The duration of precipitation accounted for less than 20%of the icing period in the mountainous area,with solid-phase hydrometeors being predominant.Icing events,dominated by freezing rain(FR)and mixed rain–graupel(more than 70%),were characterized by glaze or highdensity mixed icing.The relationship between the melting energy and refreezing energy reflected the distribution characteristics of the proportion of FR under mixed-phase precipitation.The intensity of the warm layer and the dominant precipitation phase significantly affected the variations in the microphysical properties of FR.The melting of large dry snowflakes significantly contributed to FR in the mountainous areas,resulting in smaller generalized intercepts and larger mass-weighted mean diameters in the presence of a stronger warm layer.Under a weaker warm layer,the value of the massweighted mean diameter was significantly smaller because of the inability of large solid particles to melt.Finally,FR in the mountainous area dominated the ice weight during the rapid ice accumulation period.A numerical simulation of FR icing on wires effectively revealed the evolution of disaster-causing icing in mountainous areas.
基金financially supported by the Agency for Science,Technology and Research(A*Star),Republic of Singapore,under the Aerospace Consortium Cycle 12“Characterization of the Effect of Wire and Powder Deposited Materials”(No.A1815a0078)。
文摘The feasibility of manufacturing Ti-6Al-4V samples through a combination of laser-aided additive manufacturing with powder(LAAM_(p))and wire(LAAM_(w))was explored.A process study was first conducted to successfully circumvent defects in Ti-6Al-4V deposits for LAAM_(p) and LAAM_(w),respectively.With the optimized process parameters,robust interfaces were achieved between powder/wire deposits and the forged substrate,as well as between powder and wire deposits.Microstructure characterization results revealed the epitaxial prior β grains in the deposited Ti-6Al-4V,wherein the powder deposit was dominated by a finerα′microstructure and the wire deposit was characterized by lamellar α phases.The mechanisms of microstructure formation and correlation with mechanical behavior were analyzed and discussed.The mechanical properties of the interfacial samples can meet the requirements of the relevant Aerospace Material Specifications(AMS 6932)even without post heat treatment.No fracture occurred within the interfacial area,further suggesting the robust interface.The findings of this study highlighted the feasibility of combining LAAM_(p) and LAAM_(w) in the direct manufacturing of Ti-6Al-4V parts in accordance with the required dimensional resolution and deposition rate,together with sound strength and ductility balance in the as-built condition.
文摘SS316L alloy coupled with Inconel625 alloy were combined with Ti6Al4V or Inconel718 alloy through wire arc additive manufacturing technique to manufacture functionally graded materials(FGMs).Two FGMs,namely 60%SS316L+20%Inconel625+20%Ti6Al4V composite and 60%SS316L+20%Inconel625+20%Inconel718 composite,were prepared.The tensile strength,elongation,yield strength,hardness,cross section area of the parent material,and composition were analysed.Results illustrate that the 60%SS316L+20%Inconel625+20%Inconel718 composite has better mechanical properties than 60%SS316L+20%Inconel625+20%Ti6Al4V composite,and the comprehensive properties of 60%SS316L+20%Inconel 625+20%Ti6Al4V composite are better than those of the parent material SS316L.Hence,the composite of 60%SS316L+20%Inconel625+20%Inconel718 is optimal.Due to its high strength,the 60%SS316L+20%Inconel625+20%Inconel718 composite has great application potential in the field of high pressure pneumatic tool and defence tool.
基金Project supported by“Unveiled the List of Commanders”Key Core Common Technology Projects of Ji’an,ChinaProject(LJKMZ20220591)supported by the Basic Scientific Research Project of the Education Department of Liaoning Province,ChinaProject(CSTB2023NSCQ-LZX0116)supported by the Natural Science Foundation Joint Fund for Innovation and Development Projects of Chongqing,China。
文摘The ultrafine copper wire with a diameter of 18μm is prepared via cold drawing process from the single crystal downcast billet(Φ8 mm),taking a drawing strain to 12.19.In this paper,in-depth investigation of the microstructure feature,texture evolution,mechanical properties,and electrical conductivity of ultrafine wires ranging fromΦ361μm toΦ18μm is performed.Specially,the microstructure feature and texture type covering the whole longitudinal section of ultrafine wires are elaborately characterized.The results show that the average lamella thickness decreases from 1.63μm to 102 nm during the drawing process.Whereas,inhomogeneous texture evolution across different wire sections was observed.The main texture types of copper wires are comprised of<111>,<001>and<112>orientations.Specifically,the peripheral region is primarily dominated by<111>and<112>,while the central region is dominated by<001>and<111>.As the drawing strain increases,the volume fraction of hard orientation<111>with low Schmid factor increases,where notably higher fraction of<111>is resulted from the consumption of<112>and<001>for the wire ofΦ18μm.For drawn copper wire of 18μm,superior properties are obtained with a tensile strength of 729.8 MPa and an electrical conductivity of 86.9%IACS.Furthermore,it is found that grain strengthening,dislocation strengthening,and texture strengthening are three primary strengthening mechanisms of drawn copper wire,while the dislocation density is the main factor on the reducing of conductivity.
基金financially supported by the foundation of the NMPA Key Laboratory for Quality Evaluation of Medical Protective and Implant Devices,the Shandong Provincial Natural Science Foundation(ZR2021MB096)to Huali Niethe Science and Technology Research Project of Shanghai Songjiang District Science and Technology Committee(No.2023SJKWGG063)+4 种基金the Medical Engineering Cross Research Project of Shanghai Jiaotong University(No.YG2022QN074)to Changping Wangthe National Nature Science Foundation of China(No.32371383)the Shanghai 2023“Science and Technology Innovation Action Plan”Biomedical Science and Technology Support Special Project(No.23S31900100)the Foundation of National Center for Translational Medicine(Shanghai)SHU Branch(No.SUITM-202411)to Siyu Nithe Research Center for the Industries of the Future at Westlake University and the Zhejiang Provincial Natural Science Foundation of China(No.2022XHSJJ003)for support.
文摘The Kirschner wire(K-wire)is widely used in orthopedic external fixation due to its versatility and clinical effectiveness.However,a significant challenge associated with its use is the potential for bacterial migration,subsequent infection,and dislodgement as the wire penetrates the skin and bone.This study introduces a novel bioactive material,selenium/calcium silicate(Se/β-CS),achieved by integrating selenium-an essential trace element in the human body-into bioceramic calcium silicate.This integration was accomplished using a combined chemical co-deposition method and redox reaction.Furthermore,a uniform and controllable Se/β-CS coating was applied to the K-wire's surface using the Langmuir-Blodgett technique.This coating gradually releases active components-Si,Ca,and Se-that effectively eliminate bacterial infections and promote osteointegration.The findings of this study offer promising opportunities for the use of robust and multifunctional coating materials on implantable devices,particularly within the fields of orthopedics,transplantation,and surgery.
基金supported by the National Natural Science Foundation of China(NSFC)under Grant Nos.52001313,52130002,52273322,and 52321001IMR Innovation Fund under Grant No.2023-PY05+3 种基金the Natural Science Foundation of Liaoning Province under Grant No.2022-MS-001the China Postdoctoral Science Foundation under Grant No.GZC20232740the Zhongke Technology Achievement Transfer and Transformation Center of Henan Province under Grant No.2024109the Joint Research Project between Chinese Academy of Sciences(CAS)under Grant No.174321KYSB20210002.
文摘Simultaneously improving the strength and electrical conductivity of conducting metallic materials is of great significance,but it still remains a key challenge as the two properties are often mutually exclusive.In this study,we demonstrate a“<111>oriented fibrous grains with ultra-high aspect ratio”strategy for breaking such a conflict in Cu wire,which relies on the distinctive spatial distribution of grain boundaries and the highly consistent hard orientation to play their respective roles in suffering loading and conducting,thereby enabling a separate optimization of both strength and electrical conductivity.Therefore,a processing route was designed,involving directional solidification followed by large drawing deformation,to successfully construct fibrous grains with an ultra-high aspect ratio in 596.7 and ultra-high<111>texture proportion over 97%,which achieves Cu wire with a remarkable combination of yield strength in 482.3 MPa and electrical conductivity in 101.63%IACS.Finally,the mechanisms for high strength and high electrical conductivity were quantitatively discussed.
基金financially supported by National Natural Science Foundation of China(Project No.51878156).
文摘To investigate the performance of utilizing the shape memory effect of SMA(Shape Memory Alloy)wire to generate recovery stress,this paper performed single heating recovery stress tests and reciprocating heating-cooling recovery stress tests on SMA wire under varying initial strain conditions.The effects of various strains and different energized heating methods on the recovery stress of SMA wires were explored in the single heating tests.The SMA wire was strained from 2%to 8%initially,and two distinct heating approaches were employed:one using a large current interval for rapid heating and one using a small current interval for slower heating.The experimental outcomes reveal that during a single heating cycle,the temperature-recovery stress relationship of SMA wire exhibits three distinct stages:the martensite phase stage,the transition stage from martensite to austenite phase,and the austenite phase stage.Notably,the choice of heating method does not influence the maximum recovery stress value,and the correlation between initial strain and maximum recovery stress is predominantly linear.Moreover,conducting the reciprocating temperature rise and fall performance test is important to better simulate the scenario in practical engineering where multiple recovery stress in SMA wires for structural repair.In this test,two temperature cycling methods were studied:interval rise and fall,as well as direct rise and fall.In the case of utilizing the interval temperature rise and fall method,it was observed that the recovery stress associated with cooling was significantly higher than that corresponding to heating at the same temperature.Furthermore,the recovery stress was lower upon subsequent heating than that measured during the previous heating cycle.Based on the experimental results,a prediction model for the temperature-recovery stress relationship has been proposed to simplify numerical calculations.It is hoped that an approximate temperaturerecovery stress curve can be obtained from the parameters of the SMA wire.The calculated values derived from this model show good alignment with the measured values,indicating its reliability.
文摘Inside a small shop on Lhasa's Barkhor Street,Namgyal Dorje,a young man born after 1995,delicately embeds copper wire across a wooden board.Although not born into a traditi onal Thangka pain ting family,Namgyal Dorje uses copper wire and enamel glaze to push the boundaries of traditional Thangka art-both in innovation and accessibility.
基金financially supported by the National Natural Science Foundation of China(Grant No.52471301)the Fujian Province Transportation Science and Technology Project(Grant No.JC202302)the Zhejiang Provincial Natural Science Foundation of China(Grant No.LY24E090003).
文摘Buckling failure in submarine cables presents a prevalent challenge in ocean engineering.This work aims to explore the buckling behavior of umbilical cables with damaged sheaths subjected to compression and bending cyclic loads.A finite element model is devised,incorporating a singular armor wire,a rigid core,and a damaged sheath.To scrutinize the buckling progression and corresponding deformation,axial compression and bending cyclic loads are introduced.The observations reveal that a reduction in axial compression results in a larger number of cycles before buckling ensues and progressively shifts the buckling position toward the extrados and fixed end.Decreasing the bending radius precipitates a reduction in the buckling cycle number and minimizes the deformation in the armor wire.Furthermore,an empirical model is presented to predict the occurrence of birdcage buckling,providing a means to anticipate buckling events and to estimate the requisite number of cycles leading to buckling.
基金supported by the Frontier Technologies R&D Program of Jiangsu(Grant No.BF2024077)Key Research and Development Program of Jiangsu Province(Grant Nos.BE2022069–1,BE2022069–2)+2 种基金National Funded Postdoctoral Researcher Program(Grant No.GZC20240817)Shui Mu Tsinghua Scholar(Grant No.2024SM038)China Postdoctoral Science Foundation(2025M771345).
文摘Ti-6Al-4V(Ti64)alloys are widely used in the aerospace and automotive industries owing to their excellent high-temperature mechanical properties.This study investigated the creep behavior of Ti64 samples with ultra-lowβcontent(<1%)fabricated by wire arc additive manufacturing(WAAM)under high-temperature and high-stress conditions.The creep properties of the WAAM Ti64 samples were evaluated at 600°C and 700°C with different stresses,and they were analyzed using electron backscattered diffraction(EBSD)and transmission electron microscopy(TEM).Commercially forged Ti64 samples were used as controls to compare their microstructures.As the stress increased,the degree of recrystallization intensified,leading to finer recrystallized grains.After high-temperature deformation,theβcontent in WAAM samples increased from less than 1%to over 8%.The dislocation density was high at low deformations,and the degree of recrystallization was low,suggesting superior creep resistance of the WAAM samples.The stress exponent,EBSD,and TEM analyses confirmed that dislocation movement primarily governs creep deformation in WAAM Ti64.Conversely,the forged samples exhibited easier deformation,lower dislocation density,higher recrystallization,and inferior creep resistance.This research highlights the impact ofβcontent and microstructure on the creep behavior of Ti64.The WAAM Ti64 with ultra-lowβcontent demonstrates enhanced creep resistance compared to commercially forged samples,primarily due to its unique microstructure with closely interconnectedαphases and lowerβ-phase content.
基金the National Natural Science Foundation of China(22208320)the Science and Technology Program of Henan Province(212102210044)The Henan Association for Science and Technology Youth Talent Support Program(2022HYTP026).
文摘Combining the advantages of high efficiency,low-pressure drop,and large throughput,the pore arrayenhanced tube-in-tube microchannel(PA-TMC) is a promising microreactor for industrial applications.However,most of the mass transfer takes place in the upstream pore region,while the contribution of the downstream annulus is limited.In this work,helical wires were introduced into the annulus by adhering to the outer surface of the inner tube.Mixing behavior and mass transfer of liquid-liquid twophase flow in PA-TMC with different helical wires have been systematically studied by a combination of experiments and volume of fluid(VOF) method.The introduction of helical wires improves the overall volumetric mass transfer coefficient KLa by up to 133% and the mass transfer efficiency E by up to 117%.The simulation results show that the helical wire brings extra phase mixing regions and increases the specific interface area,while accelerating the fluid flow and expanding the area of enhanced turbulent dissipation rate.Influences of helical wires in various configurations are compared by the comprehensive index I concerning the pressure drop and mass transfer performance simultaneously and a new correlation between KLa and specific energy consumption φ is proposed.This research deepens the understanding of the mixing behavior and mass transfer in the PA-TMCs and provides practical experience for the process intensification of microchannel reactors.
基金support provided by National Natural Science Foundation of China(Nos.52405364 and 52171110)Jiangsu Funding Program for Excellent Postdoctoral Talent+3 种基金JITRI Advanced Materials R&D Co.Ltdsupport by European Union Horizon 2020 Research and Innovation Program(857470)European Regional Development Fund via the Foundation for Polish Science International Research Agenda PLUS program(MAB PLUS/2018/8)The publication was created within the framework of the project of the Minister of Science and Higher Education,Support for the Activities of Centres of Excellence established in Poland under Horizon 2020,under contract No.MEiN/2023/DIR/3795.
文摘The deformation of Cu–20 wt.%Fe alloy wires leads to a significant improvement in mechanical properties and a decrease in electrical conductivity.Simultaneous improvements in strength and conductivity were achieved by intermediate annealing of drawn Cu–20 wt.%Fe wires.As the annealing temperature increased,the strength of Cu–20 wt.%Fe alloy wire decreased monotonically,but the electrical conductivity first increased and then decreased,reaching its peak value after annealing at 500℃.The decrease in strength is related to dislocation recovery and static recrystallization of Cu and Fe phases,and the increase in electrical conductivity mainly results from the aging precipitation of solid solution Fe.After annealing at 500℃,there was no obvious recrystallization of Cu phase,and many of the nano-Fe particles precipitated from Cu matrix.An annealing temperature of 600℃ induced the recrystallization of Cu matrix and an increase in Fe solid solubility,resulting in a decrease in strength and electrical conductivity.Subsequently,the wires annealed at 500℃ were drawn to 2 mm.Compared with those of the continuously drawn Cu–20 wt.%Fe alloy wires,the deformation ability,strength,and electrical conductivity of Cu–20 wt.%Fe alloy wires subjected to intermediate annealing treatment are significantly greater.This is mainly related to the sufficient precipitation of Fe in Cu matrix and the strengthening of refined Fe fibers parallel to the drawing direction.
基金The National Natural Science Foundation of China(No.52305381)the Natural Science Foundation of Jiangsu Province(No.BK20210351)the Fundamental Research Funds for the Central Universities(No.30923011008).
文摘A reasonable process plan is an important basis for implementing wire arc additive and subtractive hybrid manufacturing(ASHM),and a new optimization method is proposed.Firstly,the target parts and machining tools are modeled by level set functions.Secondly,the mathematical model of the additive direction optimization problem is established,and an improved particle swarm optimization algorithm is designed to decide the best additive direction.Then,the two-step strategy is used to plan the hybrid manufacturing alternating sequence.The target parts are directly divided into various processing regions;each processing region is optimized based on manufacturability and manufacturing efficiency,and the optimal hybrid manufacturing alternating sequence is obtained by merging some processing regions.Finally,the method is used to outline the process plan of the designed example model and applied to the actual hybrid manufacturing process of the model.The manufacturing result shows that the method can meet the main considerations in hybrid manufacturing.In addition,the degree of automation of process planning is high,and the dependence on manual intervention is low.
基金supported by National Key Research and Development Program(Grant No.2024YFB4609700)the National Natural Science Foundation of China(Grant No.52374365)。
文摘Wire arc additive manufacturing(WAAM)is one of the most promising approaches to manufacturing large and complex metal components owing to its low cost and high efficiency.However,pores and coarse columnar grains caused by thermal accumulation in WAAM significantly decrease the strength and increase the anisotropy,preventing the achievement of both high strength and isotropy.In this study,the strength and anisotropy of AlMg-Sc-Zr alloys were improved by regulating heat input.The results indicated that as the heat input increased from 60 to 99 J/mm,all the components had lower porosity(lower than 0.04%),the size of the Al_(3)(Sc_(1-x),Zr_(x))phases decreased,and the number density increased.The average grain size gradually decreased,and the grain morphologies transformed from coarse equiaxed grain(CEG)+fine equiaxed grain(FEG)to FEG owing to the increase in Al_(3)(Sc_(1-x),Zr_(x))phases with increasing heat input.After heat treatment at 325℃for 6 h,high-density dispersed Al_(3)Sc phases(<10 nm)precipitated.The alloy possessed the highest strength at 79 J/mm,ultimate tensile strength(UTS)of approximately 423±3 MPa,and in-plane anisotropy of approximately 4.3%.At a heat input of 99 J/mm,the in-plane anisotropy decreased to 1.2%and UTS reached 414±5 MPa.The reduction in the CEG prolonged the crack propagation path,which improved the UTS in the vertical direction and reduced the anisotropy.Theoretical calculations indicated that the main strengthening mechanisms were solid solution and precipitation strengthening.This study lays the theoretical foundations for WAAM-processed high-strength and isotropic Al alloy components.
基金the expense of a grant of the Russian Science Foundation(project No.23-69-10006),https://rscf.ru/project/23-69-10006/(accessed on 6 May 2025).
文摘The article considers a relaxation of the water/polypropylene glycol-425 solution with a lower critical solution temperature(LCST)following its pulsed superheating concerning liquid-liquid and liquid-vapor equilibrium lines,as well as the liquid-liquid spinodal.Superheating was performed using the pulsed heat generation method in a micro-sized wire probe.The main heating mode was the constant(over the pulse length)power mode.Characteristic heating rates ranged from 0.05×10^(5) to 2×10^(5) K/s,while the degree of superheating concerning the spinodal was up to 200 K.The temperature of spontaneous boiling-up and the amplitude of the corresponding signal were monitored as functions of the heating rate set by the power value.The results demonstrate an example of the interaction of liquidliquid and liquid-vapor phase transitions,as well as the spinodal decomposition of a solution with LCST against the background of its unstable states.We proposed a physical model to explain the minimum spontaneous boiling-up temperature revealed within a certain range of heating rates,which is not typical of completely miscible solutions.Further research will focus on establishing a general criterion for the possibility of spinodal decomposition of such solutions under the conditions of rapid heating.
基金supported in part by China Scholarship Council under Grant 202208200010。
文摘Wire arc additive manufacturing(WAAM)has emerged as a promising technique for producing large-scale metal components,favoured by high deposition rates,flexibility and low cost.Despite its potential,the complexity of WAAM processes,which involves intricate thermal dynamics,phase transitions,and metallurgical,mechanical,and chemical interactions,presents considerable challenges in final product qualities.Simulation technologies in WAAM have proven invaluable,providing accurate predictions in key areas such as material properties,defect identification,deposit morphology,and residual stress.These predictions play a critical role in optimising manufacturing strategies for the final product.This paper provides a comprehensive review of the simulation techniques applied in WAAM,tracing developments from 2013 to 2023.Initially,it analyses the current challenges faced by simulation methods in three main areas.Subsequently,the review explores the current modelling approaches and the applications of these simulations.Following this,the paper discusses the present state of WAAM simulation,identifying specific issues inherent to WAAM simulation itself.Finally,through a thorough review of existing literature and related analysis,the paper offers future perspectives on potential advancements in WAAM simulation strategies.
