Objective: To explore the clinical efficacy of shoulder arthroscopic one-knot-two-wire suture bridge technique in the treatment of small and medium-sized rotator cuff tears. Methods: The clinical data of 22 patients w...Objective: To explore the clinical efficacy of shoulder arthroscopic one-knot-two-wire suture bridge technique in the treatment of small and medium-sized rotator cuff tears. Methods: The clinical data of 22 patients with small and medium-sized rotator cuff injuries treated with the one-knot-two-wire suture bridge technique from February 2022 to June 2023 in the Department of Orthopaedics of Jingzhou Hospital Affiliated to Yangtze University were retrospectively analysed, among which 14 cases were male and 8 cases were female;the age ranged from 35 to 68 years old, with an average of (50.86 ± 10.80) years old. All cases underwent an MRI examination of the shoulder joint to understand the type and degree of injury. The duration of the disease ranged from 120 to 166 d, with a mean of (141.23 ± 13.46) d. The evaluation of the operation time, intraoperative bleeding, visual analogue scale (VAS) of pain, Constant-Murley score and Sugaya grading of shoulder MRI were performed at the last follow-up. Results: All 22 patients were followed up for 12 - 18 months, with a mean of (14.68 ± 1.89 d). The operation time was 38 - 58 min, mean (48.18 ± 5.92) min;intraoperative bleeding was 5 - 15 mL, mean (10.00 ± 3.45) mL. All patients achieved normal healing without re-tear, vascular and nerve injury, incision infection, anchor nail loosening and dislodgement and other complications. At the last follow-up, both shoulders were normal in shape and symmetrical on both sides. The VAS score was 0 - 1.2 points, with an average of 0.61 ± 0.42 points, and the Constant-Murley score was 70 - 98 points, with an average of 86.09 ± 8.56 points. The Sugaya classification of MRI examination was 17 cases of grade I, 4 cases of grade II, and 1 case of grade III. Conclusion: One-knot-two-wire suture bridge technique is used for the treatment of small and medium-sized rotator cuff tears with short operative time, low bleeding, and good clinical outcome.展开更多
The high boron alloy surfacing layer was easily cracked due to its insufficient toughness by using hybrid powder/ wire overlaying method. In order to explore the cracked mechanism, the microstructures and the wear res...The high boron alloy surfacing layer was easily cracked due to its insufficient toughness by using hybrid powder/ wire overlaying method. In order to explore the cracked mechanism, the microstructures and the wear resistance of the samples with different boron contents were studied. Further, phases analysis, microhardness, macrohardness and wear test were also carried out. The boron content depended microstructures were observed. The precipitation of the Fe2B, Fe3 （ C, B）, Fe23 （C, B）6 were increased with the increase of boron content. It was found that the wear resistance was independent of the macrohardness as the macrohardness increased firstly and then remained steady at -62 HRC. However, the wear resistance was depended on the boron contents, and which increased with the increase of the boron contents. The abrasive loss mechanism changed from plastic deformation removal to fracture removal.展开更多
This paper introduces the principle of the multi-level method of moments (MoM) and its application in the analysis of the wire-antenna arrays. The multi-level MoM broadens the usage of the iterative methods in the MoM...This paper introduces the principle of the multi-level method of moments (MoM) and its application in the analysis of the wire-antenna arrays. The multi-level MoM broadens the usage of the iterative methods in the MoM. Our numerical results show that when applying it to the wire-antenna array analysis with the consideration of the mutual coupling between elements, it can allow a rapid and accurate evaluation of the current distribution on the antennas, and the computational cost is less, especially when the number of antennas is large.展开更多
The quality of mischmetal wire and rod and the method of adding rare earth into steel are quite important for making high quality steel. This paper proposes a quality specification of wire and rod as well as related a...The quality of mischmetal wire and rod and the method of adding rare earth into steel are quite important for making high quality steel. This paper proposes a quality specification of wire and rod as well as related adding method. The paper also provides principles for selecting raw material and adding method.展开更多
Castex of AS wire is a new technology of near net shape. To study the variation of temperature and velocity of liquid (or semisolid) aluminum during dynamic solidification the numerical simulation was carried out with...Castex of AS wire is a new technology of near net shape. To study the variation of temperature and velocity of liquid (or semisolid) aluminum during dynamic solidification the numerical simulation was carried out with the theory of heat-transfer and hydrodynamics by means of 3-dimensional finite element method. From simulation results, it is found that the variation of temperature and velocityis mainly influenced by the casting temperature of aluminum, rotating speed of Castex wheel and flow of cooling water. Among theseinfluencing factors, the casting temperature distributes most to the length of liquid phase metal. Moreover, the faster the metal solidifies,the higher the metal there moves with the overall trend of descending from the bottom of the wheel to the shoe wall as well as from sidewalls to the center of wheel groove. In comparison with the practical value, the simulation is reliable.展开更多
研究了复杂微细导线电容矩阵提取边界元法(boundary element method,BEM)的边界离散问题以及增强计算精度和数值稳定性的有效措施,分析了开阔边界尺寸、开阔边界离散、导线离散对计算精度的影响以及伪解、矩阵奇异性问题,提出了基于导...研究了复杂微细导线电容矩阵提取边界元法(boundary element method,BEM)的边界离散问题以及增强计算精度和数值稳定性的有效措施,分析了开阔边界尺寸、开阔边界离散、导线离散对计算精度的影响以及伪解、矩阵奇异性问题,提出了基于导线离散迭代和开阔边界迭代两阶段自动迭代边界元算法(automatic iterative boundary element method,AIBEM),并结合实例阐述了全域法和区域分解法两种多层介质问题系数矩阵生成方法。研究结果表明,边界环内生成的系数矩阵存在误差均衡协调问题,对复杂模型需合理选择各线段离散单元数及开阔边界尺寸,通过AIBEM可以获得经济的离散参数,有效避免矩阵奇异性,并提高收敛稳定性。将计算结果与有限元法、解析法、传输线法、矩量法进行了对比分析,证实了算法的可靠性。展开更多
Mg-content cored-wire was used to desulphurize and spheroidize ductile iron melt in industrial experiments. The optimal feeding speed and suitable treatment temperature were determined in the experiments. And cored-wi...Mg-content cored-wire was used to desulphurize and spheroidize ductile iron melt in industrial experiments. The optimal feeding speed and suitable treatment temperature were determined in the experiments. And cored-wire method and pouring method were compared. Conclusions have been drawn that, under these conditions in the experiments, the optimal feeding speed is 15m/min, treatment temperature should be as low as possible, 1400-1450℃ generally; and cored-wire method can act more effective in ductile iron melt desulphurization and spheroid than pouring method.展开更多
文摘Objective: To explore the clinical efficacy of shoulder arthroscopic one-knot-two-wire suture bridge technique in the treatment of small and medium-sized rotator cuff tears. Methods: The clinical data of 22 patients with small and medium-sized rotator cuff injuries treated with the one-knot-two-wire suture bridge technique from February 2022 to June 2023 in the Department of Orthopaedics of Jingzhou Hospital Affiliated to Yangtze University were retrospectively analysed, among which 14 cases were male and 8 cases were female;the age ranged from 35 to 68 years old, with an average of (50.86 ± 10.80) years old. All cases underwent an MRI examination of the shoulder joint to understand the type and degree of injury. The duration of the disease ranged from 120 to 166 d, with a mean of (141.23 ± 13.46) d. The evaluation of the operation time, intraoperative bleeding, visual analogue scale (VAS) of pain, Constant-Murley score and Sugaya grading of shoulder MRI were performed at the last follow-up. Results: All 22 patients were followed up for 12 - 18 months, with a mean of (14.68 ± 1.89 d). The operation time was 38 - 58 min, mean (48.18 ± 5.92) min;intraoperative bleeding was 5 - 15 mL, mean (10.00 ± 3.45) mL. All patients achieved normal healing without re-tear, vascular and nerve injury, incision infection, anchor nail loosening and dislodgement and other complications. At the last follow-up, both shoulders were normal in shape and symmetrical on both sides. The VAS score was 0 - 1.2 points, with an average of 0.61 ± 0.42 points, and the Constant-Murley score was 70 - 98 points, with an average of 86.09 ± 8.56 points. The Sugaya classification of MRI examination was 17 cases of grade I, 4 cases of grade II, and 1 case of grade III. Conclusion: One-knot-two-wire suture bridge technique is used for the treatment of small and medium-sized rotator cuff tears with short operative time, low bleeding, and good clinical outcome.
基金supported by the Heilongjiang Province Natural Science Foundation(No.ZD201008)Jiamusi University Scientific Research Project(22Zb201518)State Key Laboratory of Advanced Welding Production Technology Project(AWJ-M13-04)
文摘The high boron alloy surfacing layer was easily cracked due to its insufficient toughness by using hybrid powder/ wire overlaying method. In order to explore the cracked mechanism, the microstructures and the wear resistance of the samples with different boron contents were studied. Further, phases analysis, microhardness, macrohardness and wear test were also carried out. The boron content depended microstructures were observed. The precipitation of the Fe2B, Fe3 （ C, B）, Fe23 （C, B）6 were increased with the increase of boron content. It was found that the wear resistance was independent of the macrohardness as the macrohardness increased firstly and then remained steady at -62 HRC. However, the wear resistance was depended on the boron contents, and which increased with the increase of the boron contents. The abrasive loss mechanism changed from plastic deformation removal to fracture removal.
文摘This paper introduces the principle of the multi-level method of moments (MoM) and its application in the analysis of the wire-antenna arrays. The multi-level MoM broadens the usage of the iterative methods in the MoM. Our numerical results show that when applying it to the wire-antenna array analysis with the consideration of the mutual coupling between elements, it can allow a rapid and accurate evaluation of the current distribution on the antennas, and the computational cost is less, especially when the number of antennas is large.
文摘The quality of mischmetal wire and rod and the method of adding rare earth into steel are quite important for making high quality steel. This paper proposes a quality specification of wire and rod as well as related adding method. The paper also provides principles for selecting raw material and adding method.
文摘Castex of AS wire is a new technology of near net shape. To study the variation of temperature and velocity of liquid (or semisolid) aluminum during dynamic solidification the numerical simulation was carried out with the theory of heat-transfer and hydrodynamics by means of 3-dimensional finite element method. From simulation results, it is found that the variation of temperature and velocityis mainly influenced by the casting temperature of aluminum, rotating speed of Castex wheel and flow of cooling water. Among theseinfluencing factors, the casting temperature distributes most to the length of liquid phase metal. Moreover, the faster the metal solidifies,the higher the metal there moves with the overall trend of descending from the bottom of the wheel to the shoe wall as well as from sidewalls to the center of wheel groove. In comparison with the practical value, the simulation is reliable.
文摘研究了复杂微细导线电容矩阵提取边界元法(boundary element method,BEM)的边界离散问题以及增强计算精度和数值稳定性的有效措施,分析了开阔边界尺寸、开阔边界离散、导线离散对计算精度的影响以及伪解、矩阵奇异性问题,提出了基于导线离散迭代和开阔边界迭代两阶段自动迭代边界元算法(automatic iterative boundary element method,AIBEM),并结合实例阐述了全域法和区域分解法两种多层介质问题系数矩阵生成方法。研究结果表明,边界环内生成的系数矩阵存在误差均衡协调问题,对复杂模型需合理选择各线段离散单元数及开阔边界尺寸,通过AIBEM可以获得经济的离散参数,有效避免矩阵奇异性,并提高收敛稳定性。将计算结果与有限元法、解析法、传输线法、矩量法进行了对比分析,证实了算法的可靠性。
基金the High Technology Research and Development Program of China(No.2002A4336072)
文摘Mg-content cored-wire was used to desulphurize and spheroidize ductile iron melt in industrial experiments. The optimal feeding speed and suitable treatment temperature were determined in the experiments. And cored-wire method and pouring method were compared. Conclusions have been drawn that, under these conditions in the experiments, the optimal feeding speed is 15m/min, treatment temperature should be as low as possible, 1400-1450℃ generally; and cored-wire method can act more effective in ductile iron melt desulphurization and spheroid than pouring method.
