The experiments on wing-body junction and wake flow were carried cul in alow-turbulence level wind tunnel. Intensive measurements of various flow parameters,such as the distributions of the pressure on the surfaces of...The experiments on wing-body junction and wake flow were carried cul in alow-turbulence level wind tunnel. Intensive measurements of various flow parameters,such as the distributions of the pressure on the surfaces of the airfoil and the plate wall,the mean and the fluctuating velocities, as well as the turbulent kinetic energy, u'v' andu'w'etc., were performed. The results indicate that the secondary flow entrains the highvelocity low-turbulence fluid into the boundary layer and the wake vortex dominates thewake flow. Some regions of negative eddy viscosity are also found in the wake flow.展开更多
Wing-body junction turbulence flow is simulated by using RANS equation and boundary fitted coordinate technique. Three order differential scheme is used in the computation of convection term and two layers turbulence ...Wing-body junction turbulence flow is simulated by using RANS equation and boundary fitted coordinate technique. Three order differential scheme is used in the computation of convection term and two layers turbulence model are employed in the calculation.展开更多
To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. ...To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.展开更多
Synthetic analysis is conducted to the wind tunnel experiment results of zero lift drag coefficient and lift coefficient for large aspect ratio winged rigid body.By means of wind tunnel experiment data,the dynamics mo...Synthetic analysis is conducted to the wind tunnel experiment results of zero lift drag coefficient and lift coefficient for large aspect ratio winged rigid body.By means of wind tunnel experiment data,the dynamics model of the zero lift drag coefficient and lift coefficient for the large aspect ratio winged rigid body is amended.The research indicates that the change trends of zero lift drag coefficient and lift coefficient to Mach number are similar.The calculation result and wind tunnel experiment data all verify the validity of the amended dynamics model by which to estimate the zero lift drag coefficient and lift coefficient for the large aspect ratio winged rigid body,and thus providing some technical reference to aerodynamics character analysis of the same types of winged rigid body.展开更多
The aerodynamic interaction between the contralateral wings and between the body and wings of a model insect are studied, by using the method of numerically solving the Navier-Stokes equations over moving overset grid...The aerodynamic interaction between the contralateral wings and between the body and wings of a model insect are studied, by using the method of numerically solving the Navier-Stokes equations over moving overset grids, under typical hovering and forward flight conditions. Both the interaction between the contralateral wings and the interaction between the body and wings are very weak, e.g. at hovering, changes in aerodynamic forces of a wing due to the present of the other wing are less than 3% and changes in aerodynamic forces of the wings due to presence of the body are less than 2%. The reason for this is as following. During each down- or up-stroke, a wing produces a vortex ring, which induces a relatively large jet-like flow inside the ring but very small flow outside the ring. The vortex rings of the left and right wings are on the two sides of the body. Thus one wing is outside vortex ring of the other wing and the body is outside the vortex rings of the left and right wings, resulting in the weak interactions.展开更多
In this paper, we study the aerodynamic interactions between the contralateral wings and between the body and wings of a model insect, when the insect is hovering and has various translational and rotational motions, ...In this paper, we study the aerodynamic interactions between the contralateral wings and between the body and wings of a model insect, when the insect is hovering and has various translational and rotational motions, using the method numerically solving the Navier-Stokes equations over moving overset grids. The aerodynamic interactional effects are identified by compar-ing the results of a complete model insect, the corresponding wing pair, single wing and body without the wings. Horizontal, vertical and lateral translations and roll, pitch and yaw rotations at small speeds are considered. The results indicate that for the motions considered, both the interaction between the contralateral wings and the interaction between the body and wings are weak. The changes in the forces and moments of a wing due to the contralateral wing interaction, of the wings due to the pres-ence of the body, and of the body due to the presence of the wings are generally less than 4.5%. Results show that aerodynamic forces of wings and body can be measured or computed separately in the analysis of flight stability and control of hovering in-sects.展开更多
This paper examines the Shock/Shock Interactions（SSI）between the body and wing of aircraft in supersonic flows.The body is simplified to a flat wedge and the wing is assumed to be a sharp wing.The theoretical spatia...This paper examines the Shock/Shock Interactions（SSI）between the body and wing of aircraft in supersonic flows.The body is simplified to a flat wedge and the wing is assumed to be a sharp wing.The theoretical spatial dimension reduction method,which transforms the 3D problem into a 2D one,is used to analyze the SSI between the body and wing.The temperature and pressure behind the Mach stem induced by the wing and body are obtained,and the wave configurations in the corner are determined.Numerical validations are conducted by solving the inviscid Euler equations in 3D with a Non-oscillatory and Non-free-parameters Dissipative（NND）finite difference scheme.Good agreements between the theoretical and numerical results are obtained.Additionally,the effects of the wedge angle and sweep angle on wave configurations and flow field are considered numerically and theoretically.The influences of wedge angle are significant,whereas the effects of sweep angle on wave configurations are negligible.This paper provides useful information for the design and thermal protection of aircraft in supersonic and hypersonic flows.展开更多
Background: Geographic variation in body size is assumed to reflect adaptation to local environmental conditions. Although Bergmann's rule is usually sufficient to explain such variation in homeotherms, some excep...Background: Geographic variation in body size is assumed to reflect adaptation to local environmental conditions. Although Bergmann's rule is usually sufficient to explain such variation in homeotherms, some exceptions have been documented. The relationship between altitude, latitude and body size, has been well documented for some vertebrate taxa during the past decades. However, relatively little information is available on the effects of climate variables on body size in birds.Methods: We collected the data of 267 adult Eurasian Tree Sparrow(Passer montanus) specimens sampled at 48 localities in China's mainland, and further investigated the relationships between two response variables, body mass and wing length, as well as a suit of explanatory variables, i.e. altitude, latitude, mean annual temperature(MAT), annual precipitation(PRC), annual sunshine hours(SUN), average annual wind speed(WS), air pressure(AP) and relative humidity(RH).Results: Our study showed that(1) although the sexes did not differ significantly in body mass, males had longer wings than females;(2) body mass and wing length were positively correlated with altitude but not with latitude;(3) body mass and wing length were negatively correlated with AP and RH, but not significantly correlated with WS. Body mass was positively correlated with SUN and inversely correlated with MAT. Wing length was not correlated with MAT in either sex, but was positively correlated with SUN and negatively correlated with PRC in male sparrows;(4) variation in body mass could be best explained by AP and SUN, whereas variation in wing length could be explained by RH and AP in both sexes. In addition, variation in male sparrows can be explained by SUN, WS and PRC but not in females.Conclusions: Two different proxies of body size, body mass and wing length, correlated with same geographic factors and different climate factors. These differences may reflect selection for heat conservation in the case of body mass, and for efficient flight in the case of wing length.展开更多
In the paper, we present a detailed analysis of the takeoff mechanics of fruitflies which perform voluntary takeoff flights. Wing and body kinematics of the insects during takeoff were measured using Based on the meas...In the paper, we present a detailed analysis of the takeoff mechanics of fruitflies which perform voluntary takeoff flights. Wing and body kinematics of the insects during takeoff were measured using Based on the measured data, high-speed video techniques. inertia force acting on the insect was computed and aerodynamic force and moment of the wings were calculated by the method of computational fluid dynamics. Subtracting the aerodynamic force and the weight from the inertia force gave the leg force. The following has been shown. In its voluntary takeoff, a fruitfly jumps during the first wingbeat and becomes airborne at the end of the first wingbeat. When it is in the air, the fly has a relatively large ＂initial＂ pitch-up rotational velocity （more than 5 000~/s） resulting from the jumping, but in about 5 wingbeats, the pitch-up rotation is stopped and the fly goes into a quasi-hovering flight. The fly mainly uses the force of jumping legs to lift itself into the air （the force from the flapping wings during the jumping is only about 5%-10% of the leg force）. The main role played by the flapping wings in the takeoff is to produce a pitch-down moment to nullify the large ＂initial＂ pitch-up rotational velocity （otherwise, the fly would have kept pitching-up and quickly fallen down）.展开更多
This paper puts forward a design idea for blended wing body（BWB）.The idea is described as that cruise point,maximum lift to drag point and pitch trim point are in the same flight attitude.According to this design id...This paper puts forward a design idea for blended wing body（BWB）.The idea is described as that cruise point,maximum lift to drag point and pitch trim point are in the same flight attitude.According to this design idea,design objectives and constraints are defined.By applying low and high fidelity aerodynamic analysis tools,BWB aerodynamic design methodology is established by the combination of optimization design and inverse design methods.High lift to drag ratio,pitch trim and acceptable buffet margin can be achieved by this design methodology.For 300-passenger BWB configuration based on static stability design,as compared with initial configuration,the maximum lift to drag ratio and pitch trim are achieved at cruise condition,zero lift pitching moment is positive,and buffet characteristics is well.Fuel burn of 300-passenger BWB configuration is also significantly reduced as compared with conventional civil transports.Because aerodynamic design is carried out under the constraints of BWB design requirements,the design configuration fulfills the demands for interior layout and provides a solid foundation for continuous work.展开更多
This paper presents a novel optimization technique for an efficient multi-fidelity model building approach to reduce computational costs for handling aerodynamic shape optimization based on high-fidelity simulation mo...This paper presents a novel optimization technique for an efficient multi-fidelity model building approach to reduce computational costs for handling aerodynamic shape optimization based on high-fidelity simulation models. The wing aerodynamic shape optimization problem is solved by dividing optimization into three steps—modeling 3D（high-fidelity） and 2D（lowfidelity） models, building global meta-models from prominent instead of all variables, and determining robust optimizing shape associated with tuning local meta-models. The adaptive robust design optimization aims to modify the shape optimization process. The sufficient infilling strategy—known as adaptive uniform infilling strategy—determines search space dimensions based on the last optimization results or initial point. Following this, 3D model simulations are used to tune local meta-models. Finally, the global optimization gradient-based method—Adaptive Filter Sequential Quadratic Programing（AFSQP） is utilized to search the neighborhood for a probable optimum point. The effectiveness of the proposed method is investigated by applying it, along with conventional optimization approach-based meta-models, to a Blended Wing Body（BWB） Unmanned Aerial Vehicle（UAV）. The drag coefficient is defined as the objective function, which is subjected to minimum lift coefficient bounds and stability constraints. The simulation results indicate improvement in meta-model accuracy and reduction in computational time of the method introduced in this paper.展开更多
Blended-Wing-Body(BWB)aircraft have a relatively short fuselage and no horizontal tail,and they usually adopt podded engines and a V tail instead of a vertical tail.Generally,BWB aircraft have decreased longitudinal a...Blended-Wing-Body(BWB)aircraft have a relatively short fuselage and no horizontal tail,and they usually adopt podded engines and a V tail instead of a vertical tail.Generally,BWB aircraft have decreased longitudinal and directional static stability and damping.In this paper,the three-axis static and dynamic stability characteristics of an example BWB aircraft with podded engines are studied.According to the differences in flight characteristics of BWB aircraft and conventional aircraft,the different airworthiness requirements for BWB aircraft are analyzed:first,based on current airworthiness regulations and transport aircraft flying quality specification,the relaxation requirement of longitudinal static stability for BWB aircraft is studied;second,the influences of podded engines on longitudinal trim,attitude and trajectory responses and maximum directional control power requirement of BWB aircraft are analyzed;third,the changes in the proportional relationships between the takeoff characteristic speeds of the example BWB aircraft are analyzed.In view of these variations in directional control power requirement and relationships between takeoff characteristic speeds,new recommendations for airworthiness evaluation are proposed for BWB aircraft.The conclusions of this paper are helpful references for configuration design,flight control law design and airworthiness evaluation of BWB aircraft.展开更多
Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley’s design principles...Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley’s design principles has been optimized to the architecture’s limit, which can hardly satisfy the further requirements on green aviation. By past decades’ investigations the BlendedWing-Body(BWB) concept has emerged as a potential solution, which can simultaneously fulfill metrics of noise, emission and fuel burn. The purpose of the present work is to analyze the developments of critical technologies for BWB conceptual design from a historical perspective of technology progress. It was found that the high aerodynamic efficiency of BWB aircraft can be well scaled by the mean aerodynamic chord and wetted aspect ratio, and should be realized with the trade-offs among stability and control and low-speed performance. The structure concepts of non-cylinder pressurized cabin are of high risks on weight prediction and weight penalty. A static stability criterion is recommended and further clear and adequate criteria are required by the evaluations of flying and handling qualities. The difficulties of propulsion and airframe integration are analyzed. The energy to revenue work ratios of well-developed BWB configurations are compared,which are 31.5% and 40% better than that of TAW, using state-of-art engine technology and future engine technology, respectively. Finally, further study aspects are advocated.展开更多
The Blended-Wing-Body(BWB) is an unconventional configuration of aircraft and considered as a potential configuration for future commercial aircraft. One of the difficulties in conceptual design of a BWB aircraft is s...The Blended-Wing-Body(BWB) is an unconventional configuration of aircraft and considered as a potential configuration for future commercial aircraft. One of the difficulties in conceptual design of a BWB aircraft is structural mass prediction due to its unique structural feature. This paper presents a structural mass prediction method for conceptual design of BWB aircraft using a structure analysis and optimization method combined with empirical calibrations. The total BWB structural mass is divided into the ideal load-carrying structural mass, non-ideal mass, and secondary structural mass. Structural finite element analysis and optimization are used to predict the ideal primary structural mass, while the non-ideal mass and secondary structural mass are estimated by empirical methods. A BWB commercial aircraft is used to demonstrate the procedure of the BWB structural mass prediction method. The predicted mass of structural components of the BWB aircraft is presented, and the ratios of the structural component mass to the Maximum TakeOff Mass(MTOM) are discussed. It is found that the ratio of the fuselage mass to the MTOM for the BWB aircraft is much higher than that for a conventional commercial aircraft, and the ratio of the wing mass to the MTOM for the BWB aircraft is slightly lower than that for a conventional aircraft.展开更多
Blended-Wing-Body(BWB) configuration, as an innovative transport concept, has become a worldwide research focus in the field of civil transports development. Relative to the conventional Tube-And-Wing(TAW) configurati...Blended-Wing-Body(BWB) configuration, as an innovative transport concept, has become a worldwide research focus in the field of civil transports development. Relative to the conventional Tube-And-Wing(TAW) configuration, the BWB shows integrated benefits and serves as a most promising candidate for future ‘‘green aviation'. The objective of the present work is to figure out the effects of the stability margin and Thrust Specific Fuel Consumption(TSFC) on the BWB design in the framework of Multi-Disciplinary Optimization(MDO). A physically-based platform was promoted to study the effect static stability margin and engine technology level. Low-order physically based models are applied to the evaluation of the weight and the aerodynamic performance. The modules and methods are illustrated in detail, and the validation of the methods shows feasibility and confidence for the conceptual design of BWB aircrafts. In order to find out the relation between planform changes and the selection of stability and engine technology level, two sets of optimizations are conducted separately. The study proves that these two factors have dominant effects towards the optimized BWB designs in both aerodynamic shapes, weight distribution, which needs to be considered during the MDO design process. A balance diagram analysis is applied to find out a reasonable static stability margin range. It can be concluded that a recommended stability margin of a practical BWB commercial aircraft can be half of that of a conventional TAW design.展开更多
Strong shock waves and flow separation often occur during the integration of nacelle and airframe for blended-wing-bodies with podded engines. To address this problem, this paper presents an integration method with nu...Strong shock waves and flow separation often occur during the integration of nacelle and airframe for blended-wing-bodies with podded engines. To address this problem, this paper presents an integration method with numerical simulations. The philosophy of channeling flow and avoiding the throat effect on the nacelle and airframe is established based on the analysis of flow interference in the initial configuration. A parametric integration design method is proposed from twodimensional plane to three-dimensional space with control mechanisms and selection principles of the key parameters determined by their influences. Results show that strong shock waves and flow separation can be successfully eliminated under the influence of both the reshaped channel and decelerated inflow below the nacelle. Supersonic regions around the nacelle are effectively reduced, concentrating mainly on the lip position. Thus, a significant cruise drag reduction(8.7%) is achieved though the pressure drag of the nacelle increases.展开更多
A rapid method of the trim drag prediction for the blended-wing-body unmanned aerial vehicle(UAV)configuration is proposed.The method consists of four steps.The first step is to parameterizedly model the blended-wing-...A rapid method of the trim drag prediction for the blended-wing-body unmanned aerial vehicle(UAV)configuration is proposed.The method consists of four steps.The first step is to parameterizedly model the blended-wing-body UAV configuration;the second is to analyze the aerodynamics of the geometric model;the third is to create aerodynamic surrogate model;and the final step is to predict the trim drag using the surrogate model.Hence,a tool for trim drag prediction is developed by integration of the four steps.The impacts of the allocation of control surfaces,position of gravity center and planform parameters on the trim drag are investigated by using the tool.Results show that using the control surface in outer wing for trim has an advantage of lower trim drag,and the position of gravity center has a primary impact on the trim drag.Moreover,the planform has secondary impacts on the trim drag.展开更多
文摘The experiments on wing-body junction and wake flow were carried cul in alow-turbulence level wind tunnel. Intensive measurements of various flow parameters,such as the distributions of the pressure on the surfaces of the airfoil and the plate wall,the mean and the fluctuating velocities, as well as the turbulent kinetic energy, u'v' andu'w'etc., were performed. The results indicate that the secondary flow entrains the highvelocity low-turbulence fluid into the boundary layer and the wake vortex dominates thewake flow. Some regions of negative eddy viscosity are also found in the wake flow.
文摘Wing-body junction turbulence flow is simulated by using RANS equation and boundary fitted coordinate technique. Three order differential scheme is used in the computation of convection term and two layers turbulence model are employed in the calculation.
文摘To compute transonic flows over a complex 3D aircraft configuration, a viscous/inviscid interaction method is developed by coupling an integral boundary-layer solver with an Eluer solver in a ＂semi-inverse＂ manner. For the turbulent boundary-layer, an integral method using Green＇s lag equation is coupled with the outer inviscid flow. A blowing velocity approach is used to simulate the displacement effects of the boundary layer. To predict the aerodynamic drag, it is developed a numerical technique called far-field method that is based on the momentum theorem, in which the total drag is divided into three component drags, i.e. viscous, induced and wave-formed. Consequently, it can provide more physical insight into the drag sources than the often-used surface integral technique. The drag decomposition can be achieved with help of the second law of thermodynamics, which implies that entropy increases and total pressure decreases only across shock wave along a streamline of an inviscid non-isentropic flow. This method has been applied to the DLR-F4 wing/body configuration showing results in good agreement with the wind tunnel data.
文摘Synthetic analysis is conducted to the wind tunnel experiment results of zero lift drag coefficient and lift coefficient for large aspect ratio winged rigid body.By means of wind tunnel experiment data,the dynamics model of the zero lift drag coefficient and lift coefficient for the large aspect ratio winged rigid body is amended.The research indicates that the change trends of zero lift drag coefficient and lift coefficient to Mach number are similar.The calculation result and wind tunnel experiment data all verify the validity of the amended dynamics model by which to estimate the zero lift drag coefficient and lift coefficient for the large aspect ratio winged rigid body,and thus providing some technical reference to aerodynamics character analysis of the same types of winged rigid body.
基金supported by the National Natural Science Foundation of China(10732030)the 111 Project (B 07009)
文摘The aerodynamic interaction between the contralateral wings and between the body and wings of a model insect are studied, by using the method of numerically solving the Navier-Stokes equations over moving overset grids, under typical hovering and forward flight conditions. Both the interaction between the contralateral wings and the interaction between the body and wings are very weak, e.g. at hovering, changes in aerodynamic forces of a wing due to the present of the other wing are less than 3% and changes in aerodynamic forces of the wings due to presence of the body are less than 2%. The reason for this is as following. During each down- or up-stroke, a wing produces a vortex ring, which induces a relatively large jet-like flow inside the ring but very small flow outside the ring. The vortex rings of the left and right wings are on the two sides of the body. Thus one wing is outside vortex ring of the other wing and the body is outside the vortex rings of the left and right wings, resulting in the weak interactions.
基金National Natural Science Foundation of China (10732030)"111" Project (B07009)
文摘In this paper, we study the aerodynamic interactions between the contralateral wings and between the body and wings of a model insect, when the insect is hovering and has various translational and rotational motions, using the method numerically solving the Navier-Stokes equations over moving overset grids. The aerodynamic interactional effects are identified by compar-ing the results of a complete model insect, the corresponding wing pair, single wing and body without the wings. Horizontal, vertical and lateral translations and roll, pitch and yaw rotations at small speeds are considered. The results indicate that for the motions considered, both the interaction between the contralateral wings and the interaction between the body and wings are weak. The changes in the forces and moments of a wing due to the contralateral wing interaction, of the wings due to the pres-ence of the body, and of the body due to the presence of the wings are generally less than 4.5%. Results show that aerodynamic forces of wings and body can be measured or computed separately in the analysis of flight stability and control of hovering in-sects.
基金supported by the Fundamental Research Funds for the Central Universities of China (No. 31020170QD087)
文摘This paper examines the Shock/Shock Interactions（SSI）between the body and wing of aircraft in supersonic flows.The body is simplified to a flat wedge and the wing is assumed to be a sharp wing.The theoretical spatial dimension reduction method,which transforms the 3D problem into a 2D one,is used to analyze the SSI between the body and wing.The temperature and pressure behind the Mach stem induced by the wing and body are obtained,and the wave configurations in the corner are determined.Numerical validations are conducted by solving the inviscid Euler equations in 3D with a Non-oscillatory and Non-free-parameters Dissipative（NND）finite difference scheme.Good agreements between the theoretical and numerical results are obtained.Additionally,the effects of the wedge angle and sweep angle on wave configurations and flow field are considered numerically and theoretically.The influences of wedge angle are significant,whereas the effects of sweep angle on wave configurations are negligible.This paper provides useful information for the design and thermal protection of aircraft in supersonic and hypersonic flows.
基金supported by grants from the National Natural Science Foundation of China (NSFC, 31330073, 31672292)the Natural Science Foundation of the Department of Education, Hebei Province (YQ2014024)
文摘Background: Geographic variation in body size is assumed to reflect adaptation to local environmental conditions. Although Bergmann's rule is usually sufficient to explain such variation in homeotherms, some exceptions have been documented. The relationship between altitude, latitude and body size, has been well documented for some vertebrate taxa during the past decades. However, relatively little information is available on the effects of climate variables on body size in birds.Methods: We collected the data of 267 adult Eurasian Tree Sparrow(Passer montanus) specimens sampled at 48 localities in China's mainland, and further investigated the relationships between two response variables, body mass and wing length, as well as a suit of explanatory variables, i.e. altitude, latitude, mean annual temperature(MAT), annual precipitation(PRC), annual sunshine hours(SUN), average annual wind speed(WS), air pressure(AP) and relative humidity(RH).Results: Our study showed that(1) although the sexes did not differ significantly in body mass, males had longer wings than females;(2) body mass and wing length were positively correlated with altitude but not with latitude;(3) body mass and wing length were negatively correlated with AP and RH, but not significantly correlated with WS. Body mass was positively correlated with SUN and inversely correlated with MAT. Wing length was not correlated with MAT in either sex, but was positively correlated with SUN and negatively correlated with PRC in male sparrows;(4) variation in body mass could be best explained by AP and SUN, whereas variation in wing length could be explained by RH and AP in both sexes. In addition, variation in male sparrows can be explained by SUN, WS and PRC but not in females.Conclusions: Two different proxies of body size, body mass and wing length, correlated with same geographic factors and different climate factors. These differences may reflect selection for heat conservation in the case of body mass, and for efficient flight in the case of wing length.
基金supported by the National Natural Science Foundation of China(11232002)the 111 Project(B07009)
文摘In the paper, we present a detailed analysis of the takeoff mechanics of fruitflies which perform voluntary takeoff flights. Wing and body kinematics of the insects during takeoff were measured using Based on the measured data, high-speed video techniques. inertia force acting on the insect was computed and aerodynamic force and moment of the wings were calculated by the method of computational fluid dynamics. Subtracting the aerodynamic force and the weight from the inertia force gave the leg force. The following has been shown. In its voluntary takeoff, a fruitfly jumps during the first wingbeat and becomes airborne at the end of the first wingbeat. When it is in the air, the fly has a relatively large ＂initial＂ pitch-up rotational velocity （more than 5 000~/s） resulting from the jumping, but in about 5 wingbeats, the pitch-up rotation is stopped and the fly goes into a quasi-hovering flight. The fly mainly uses the force of jumping legs to lift itself into the air （the force from the flapping wings during the jumping is only about 5%-10% of the leg force）. The main role played by the flapping wings in the takeoff is to produce a pitch-down moment to nullify the large ＂initial＂ pitch-up rotational velocity （otherwise, the fly would have kept pitching-up and quickly fallen down）.
文摘This paper puts forward a design idea for blended wing body（BWB）.The idea is described as that cruise point,maximum lift to drag point and pitch trim point are in the same flight attitude.According to this design idea,design objectives and constraints are defined.By applying low and high fidelity aerodynamic analysis tools,BWB aerodynamic design methodology is established by the combination of optimization design and inverse design methods.High lift to drag ratio,pitch trim and acceptable buffet margin can be achieved by this design methodology.For 300-passenger BWB configuration based on static stability design,as compared with initial configuration,the maximum lift to drag ratio and pitch trim are achieved at cruise condition,zero lift pitching moment is positive,and buffet characteristics is well.Fuel burn of 300-passenger BWB configuration is also significantly reduced as compared with conventional civil transports.Because aerodynamic design is carried out under the constraints of BWB design requirements,the design configuration fulfills the demands for interior layout and provides a solid foundation for continuous work.
文摘This paper presents a novel optimization technique for an efficient multi-fidelity model building approach to reduce computational costs for handling aerodynamic shape optimization based on high-fidelity simulation models. The wing aerodynamic shape optimization problem is solved by dividing optimization into three steps—modeling 3D（high-fidelity） and 2D（lowfidelity） models, building global meta-models from prominent instead of all variables, and determining robust optimizing shape associated with tuning local meta-models. The adaptive robust design optimization aims to modify the shape optimization process. The sufficient infilling strategy—known as adaptive uniform infilling strategy—determines search space dimensions based on the last optimization results or initial point. Following this, 3D model simulations are used to tune local meta-models. Finally, the global optimization gradient-based method—Adaptive Filter Sequential Quadratic Programing（AFSQP） is utilized to search the neighborhood for a probable optimum point. The effectiveness of the proposed method is investigated by applying it, along with conventional optimization approach-based meta-models, to a Blended Wing Body（BWB） Unmanned Aerial Vehicle（UAV）. The drag coefficient is defined as the objective function, which is subjected to minimum lift coefficient bounds and stability constraints. The simulation results indicate improvement in meta-model accuracy and reduction in computational time of the method introduced in this paper.
基金supported by the Fundamental Research Funds for the Central Universities of China (No. YWF-21-BJ-J-935)
文摘Blended-Wing-Body(BWB)aircraft have a relatively short fuselage and no horizontal tail,and they usually adopt podded engines and a V tail instead of a vertical tail.Generally,BWB aircraft have decreased longitudinal and directional static stability and damping.In this paper,the three-axis static and dynamic stability characteristics of an example BWB aircraft with podded engines are studied.According to the differences in flight characteristics of BWB aircraft and conventional aircraft,the different airworthiness requirements for BWB aircraft are analyzed:first,based on current airworthiness regulations and transport aircraft flying quality specification,the relaxation requirement of longitudinal static stability for BWB aircraft is studied;second,the influences of podded engines on longitudinal trim,attitude and trajectory responses and maximum directional control power requirement of BWB aircraft are analyzed;third,the changes in the proportional relationships between the takeoff characteristic speeds of the example BWB aircraft are analyzed.In view of these variations in directional control power requirement and relationships between takeoff characteristic speeds,new recommendations for airworthiness evaluation are proposed for BWB aircraft.The conclusions of this paper are helpful references for configuration design,flight control law design and airworthiness evaluation of BWB aircraft.
基金supported by the Fundamental Research Funds for the Central Universities (Nos. 3102019JC009 and G2016KY0002)
文摘Civil aviation faces great challenges because of its robust projected future growth and potential adverse environmental effects. The classical Tube-And-Wing(TAW) configuration following the Cayley’s design principles has been optimized to the architecture’s limit, which can hardly satisfy the further requirements on green aviation. By past decades’ investigations the BlendedWing-Body(BWB) concept has emerged as a potential solution, which can simultaneously fulfill metrics of noise, emission and fuel burn. The purpose of the present work is to analyze the developments of critical technologies for BWB conceptual design from a historical perspective of technology progress. It was found that the high aerodynamic efficiency of BWB aircraft can be well scaled by the mean aerodynamic chord and wetted aspect ratio, and should be realized with the trade-offs among stability and control and low-speed performance. The structure concepts of non-cylinder pressurized cabin are of high risks on weight prediction and weight penalty. A static stability criterion is recommended and further clear and adequate criteria are required by the evaluations of flying and handling qualities. The difficulties of propulsion and airframe integration are analyzed. The energy to revenue work ratios of well-developed BWB configurations are compared,which are 31.5% and 40% better than that of TAW, using state-of-art engine technology and future engine technology, respectively. Finally, further study aspects are advocated.
基金supported by the National Natural Science Foundation of China (No. 11432007)
文摘The Blended-Wing-Body(BWB) is an unconventional configuration of aircraft and considered as a potential configuration for future commercial aircraft. One of the difficulties in conceptual design of a BWB aircraft is structural mass prediction due to its unique structural feature. This paper presents a structural mass prediction method for conceptual design of BWB aircraft using a structure analysis and optimization method combined with empirical calibrations. The total BWB structural mass is divided into the ideal load-carrying structural mass, non-ideal mass, and secondary structural mass. Structural finite element analysis and optimization are used to predict the ideal primary structural mass, while the non-ideal mass and secondary structural mass are estimated by empirical methods. A BWB commercial aircraft is used to demonstrate the procedure of the BWB structural mass prediction method. The predicted mass of structural components of the BWB aircraft is presented, and the ratios of the structural component mass to the Maximum TakeOff Mass(MTOM) are discussed. It is found that the ratio of the fuselage mass to the MTOM for the BWB aircraft is much higher than that for a conventional commercial aircraft, and the ratio of the wing mass to the MTOM for the BWB aircraft is slightly lower than that for a conventional aircraft.
基金supported by the Fundamental Research Funds for the Central Universities (Nos. 3102019JC009 and G2016KY0002)
文摘Blended-Wing-Body(BWB) configuration, as an innovative transport concept, has become a worldwide research focus in the field of civil transports development. Relative to the conventional Tube-And-Wing(TAW) configuration, the BWB shows integrated benefits and serves as a most promising candidate for future ‘‘green aviation'. The objective of the present work is to figure out the effects of the stability margin and Thrust Specific Fuel Consumption(TSFC) on the BWB design in the framework of Multi-Disciplinary Optimization(MDO). A physically-based platform was promoted to study the effect static stability margin and engine technology level. Low-order physically based models are applied to the evaluation of the weight and the aerodynamic performance. The modules and methods are illustrated in detail, and the validation of the methods shows feasibility and confidence for the conceptual design of BWB aircrafts. In order to find out the relation between planform changes and the selection of stability and engine technology level, two sets of optimizations are conducted separately. The study proves that these two factors have dominant effects towards the optimized BWB designs in both aerodynamic shapes, weight distribution, which needs to be considered during the MDO design process. A balance diagram analysis is applied to find out a reasonable static stability margin range. It can be concluded that a recommended stability margin of a practical BWB commercial aircraft can be half of that of a conventional TAW design.
基金supported by the Fundamental Research Funds for the Central Universities (Nos. 3102019JC009 and G2016KY0002)
文摘Strong shock waves and flow separation often occur during the integration of nacelle and airframe for blended-wing-bodies with podded engines. To address this problem, this paper presents an integration method with numerical simulations. The philosophy of channeling flow and avoiding the throat effect on the nacelle and airframe is established based on the analysis of flow interference in the initial configuration. A parametric integration design method is proposed from twodimensional plane to three-dimensional space with control mechanisms and selection principles of the key parameters determined by their influences. Results show that strong shock waves and flow separation can be successfully eliminated under the influence of both the reshaped channel and decelerated inflow below the nacelle. Supersonic regions around the nacelle are effectively reduced, concentrating mainly on the lip position. Thus, a significant cruise drag reduction(8.7%) is achieved though the pressure drag of the nacelle increases.
基金supported by the National Defense Basic Scientific Research Program of China(No.A2520110006)the Fundamental Research Funds for the Central Universities(Nos.NJ20130001,NJ2012014)
文摘A rapid method of the trim drag prediction for the blended-wing-body unmanned aerial vehicle(UAV)configuration is proposed.The method consists of four steps.The first step is to parameterizedly model the blended-wing-body UAV configuration;the second is to analyze the aerodynamics of the geometric model;the third is to create aerodynamic surrogate model;and the final step is to predict the trim drag using the surrogate model.Hence,a tool for trim drag prediction is developed by integration of the four steps.The impacts of the allocation of control surfaces,position of gravity center and planform parameters on the trim drag are investigated by using the tool.Results show that using the control surface in outer wing for trim has an advantage of lower trim drag,and the position of gravity center has a primary impact on the trim drag.Moreover,the planform has secondary impacts on the trim drag.
