An unsteady numerical simulation is conducted to examine the dynamic runback characteristics of a water film flow driven by a boundary layer airflow over a solid surface pertinent to the dynamic glaze ice accretion pr...An unsteady numerical simulation is conducted to examine the dynamic runback characteristics of a water film flow driven by a boundary layer airflow over a solid surface pertinent to the dynamic glaze ice accretion process over aircraft wing surfaces.The multiphase flow simulation results of the wind-driven water runback(WDWR)flow are compared quantitatively with the experimental results in terms of the time-dependent variations of the water film thickness profiles and evolution of the front contact point of the runback water film flow.The underlying mechanism of the intermittent water runback behavior is elucidated by analyzing the time evolution of the airflow velocity and vorticity fields above the runback water film flow over the solid surface.To the best knowledge of the authors,the work presented here is the first successful attempt to numerically examine the transient runback characteristics of WDWR flows.It serves as an excellent benchmark case for the development of best practices to model the important micro-physical processes responsible for the transient water transport over aircraft wing surfaces.展开更多
With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must b...With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures（lock-in-place（LIP）,loss-of-effectiveness（LOE） and float）,flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.展开更多
The morphing wing concept aims to constantly adapt the aerodynamics to different flight stages.The wing is able to adapt to different flight conditions by an adjustable Aspect Ratio(AR)and sweep.A high AR configuratio...The morphing wing concept aims to constantly adapt the aerodynamics to different flight stages.The wing is able to adapt to different flight conditions by an adjustable Aspect Ratio(AR)and sweep.A high AR configuration provides high aerodynamic efficiency,while a low AR configuration,with highly swept wings offers a good maneuverability.Additionally,the flexible membrane allows the wing surface to stretch and contract in-plane as well as the airfoil to adapt to different aerodynamic loads.In the context of this work,the aerodynamic characteristics of a full model with form-adaptive elasto-flexible membrane wings are investigated experimentally.The focus is on the high-lift regime and on the analysis of the aerodynamic coefficients as well as their sensitivities.Especially,the lateral aerodynamic derivatives at asymmetric wing positions are of interest.展开更多
Small and micro unmanned aircraft are the focus of scientific interest due to their wide range of applications.They often operate in a highly unstable flight environment where the application of new morphing wing tech...Small and micro unmanned aircraft are the focus of scientific interest due to their wide range of applications.They often operate in a highly unstable flight environment where the application of new morphing wing technologies offers the opportunity to improve flight characteristics.The investigated concept comprises port and starboard adjustable wings,and an adaptive elastoflexible membrane serves as the lifting surface.The focus is on the benefits of the deforming membrane during the impact of a one-minus-cosine type gust.At a low Reynolds number of Re=264000,the morphing wing model is investigated numerically by unsteady fluid-structure interaction simulations.First,the numerical results are validated by experimental data from force and moment,flow field,and deformation measurements.Second,with the rigid wing as the baseline,the flexible case is investigated,focusing on the advantages of the elastic membrane.For all configurations studied,the maximum amplitude of the lift coefficient under gust load shows good agreement between the experimental and numerical results.During the decay of the gust,they differ more the higher the aspect ratio of the wing.When considering the flow field,the main differences are due to the separation behavior on the upper side of the wing.The flow reattaches earlier in the experiments than in the simulations,which explains the higher lift values observed in the former.Only at one intermediate configuration does the lift amplitude of the rigid configuration exceeds that of the flexible by about 12%,with the elastic membrane resulting in a smaller and more uniform peak load,which is also evident in the wing loading and hence in the root bending moment.展开更多
基金supported by the National Science Foundation(NSF)of the USA(Grant Nos.TIP-2140489,CBET-2313310,and CBET-2415347).
文摘An unsteady numerical simulation is conducted to examine the dynamic runback characteristics of a water film flow driven by a boundary layer airflow over a solid surface pertinent to the dynamic glaze ice accretion process over aircraft wing surfaces.The multiphase flow simulation results of the wind-driven water runback(WDWR)flow are compared quantitatively with the experimental results in terms of the time-dependent variations of the water film thickness profiles and evolution of the front contact point of the runback water film flow.The underlying mechanism of the intermittent water runback behavior is elucidated by analyzing the time evolution of the airflow velocity and vorticity fields above the runback water film flow over the solid surface.To the best knowledge of the authors,the work presented here is the first successful attempt to numerically examine the transient runback characteristics of WDWR flows.It serves as an excellent benchmark case for the development of best practices to model the important micro-physical processes responsible for the transient water transport over aircraft wing surfaces.
文摘With control using redundant multiple control surface arrangement and large-deflection drag rudders,a combat flying wing has a higher probability for control surface failures.Therefore,its flight control system must be able to reconfigure after such failures.Considering three types of typical control surface failures（lock-in-place（LIP）,loss-of-effectiveness（LOE） and float）,flight control reconfiguration characteristic and capability of such aircraft types are analyzed.Because of the control surface redundancy,the aircraft using the dynamic inversion flight control law already has a control allocation block.In this paper,its flight control configuration during the above failures is achieved by modifying this block.It is shown that such a reconfigurable flight control design is valid,through numerical simulations of flight attitude control task.Results indicate that,in the circumstances of control surface failures with limited degree and the degradation of the flying quality level,a combat flying wing adopting this flight control reconfiguration approach based on control allocation could guarantee its flight safety and perform some flight combat missions.
基金The research project is funded by the Deutsche Forschungsgemeinschaft(DFG,German Research Foundation)–BR 1511/12-1.Furthermore,the authors thank the team from the Xi’an Jiaotong University for the invitation and the organization of the Smart Aircraft 2019 Conference.
文摘The morphing wing concept aims to constantly adapt the aerodynamics to different flight stages.The wing is able to adapt to different flight conditions by an adjustable Aspect Ratio(AR)and sweep.A high AR configuration provides high aerodynamic efficiency,while a low AR configuration,with highly swept wings offers a good maneuverability.Additionally,the flexible membrane allows the wing surface to stretch and contract in-plane as well as the airfoil to adapt to different aerodynamic loads.In the context of this work,the aerodynamic characteristics of a full model with form-adaptive elasto-flexible membrane wings are investigated experimentally.The focus is on the high-lift regime and on the analysis of the aerodynamic coefficients as well as their sensitivities.Especially,the lateral aerodynamic derivatives at asymmetric wing positions are of interest.
基金funded by the Deutsche Forschungsgemeinschaft(DFG,German Research Foundation)(No.BR 1511/12-1)。
文摘Small and micro unmanned aircraft are the focus of scientific interest due to their wide range of applications.They often operate in a highly unstable flight environment where the application of new morphing wing technologies offers the opportunity to improve flight characteristics.The investigated concept comprises port and starboard adjustable wings,and an adaptive elastoflexible membrane serves as the lifting surface.The focus is on the benefits of the deforming membrane during the impact of a one-minus-cosine type gust.At a low Reynolds number of Re=264000,the morphing wing model is investigated numerically by unsteady fluid-structure interaction simulations.First,the numerical results are validated by experimental data from force and moment,flow field,and deformation measurements.Second,with the rigid wing as the baseline,the flexible case is investigated,focusing on the advantages of the elastic membrane.For all configurations studied,the maximum amplitude of the lift coefficient under gust load shows good agreement between the experimental and numerical results.During the decay of the gust,they differ more the higher the aspect ratio of the wing.When considering the flow field,the main differences are due to the separation behavior on the upper side of the wing.The flow reattaches earlier in the experiments than in the simulations,which explains the higher lift values observed in the former.Only at one intermediate configuration does the lift amplitude of the rigid configuration exceeds that of the flexible by about 12%,with the elastic membrane resulting in a smaller and more uniform peak load,which is also evident in the wing loading and hence in the root bending moment.
