Owing to the advantages of wire-driven parallel manipulator, a new wire-driven parallel suspension system for airplane model in low-speed wind tunnel is constructed, and the methods to measure and calculate the aerody...Owing to the advantages of wire-driven parallel manipulator, a new wire-driven parallel suspension system for airplane model in low-speed wind tunnel is constructed, and the methods to measure and calculate the aerodynamic parameters of the airplane model are studied. In detail, a static model of the wire-driven parallel suspension is analyzed, a mathematical model for describ- ing the aerodynamic loads exerted on the scale model is constructed and a calculation method for obtaining the aerodynamic parameters of the model by measuring the tension of wires is presented. Moreover, the measurement system for wire tension and its corresponding data acquisition system are designed and built. Thereafter, the wire-driven parallel suspension system is placed in an open return circuit low-speed wind tunnel for wind tunnel tests to acquire data of each wire tension when the airplane model is at different attitudes and different wind speeds. A group of curves about the parameters for aerodynamic load exerted on the airplane model are obtained at different wind speeds after the acquired data are analyzed. The research results validate the feasibility of using a wire-driven parallel manipulator as the suspension system for low-speed wind ttmnel tests.展开更多
Combining the computational fluid dynamics-based numerical simulation with the forced vibration technique for extraction of aerodynamic derivatives, an approach for calculating the aerodynamic derivatives and the crit...Combining the computational fluid dynamics-based numerical simulation with the forced vibration technique for extraction of aerodynamic derivatives, an approach for calculating the aerodynamic derivatives and the critical flutter wind speed for long-span bridges is presented in this paper. The RNG k-ε turbulent model is introduced to establish the governing equations, including the continuity equation and the Navier-Stokes equations, for solving the wind flow field around a two-dimensional bridge section. To illustrate the effectiveness and accuracy of the proposed approach, a simple application to the Hume Bridge in China is provided, and the numerical results show that the aerodynamic derivatives and the critical flutter wind speed obtained agree well with the wind tunnel test results.展开更多
This paper develops the modeling of wind speed by Weibull distribution in the intention to evaluate wind energy potential and help for designing small wind energy plant in Batouri in Cameroon. The Weibull distribution...This paper develops the modeling of wind speed by Weibull distribution in the intention to evaluate wind energy potential and help for designing small wind energy plant in Batouri in Cameroon. The Weibull distribution model was developed using wind speed data collected from a metrological station at the small Airport of Batouri. Four numerical methods (Moment method, Graphical method, Empirical method and Energy pattern factor method) were used to estimate weibull parameters K and C. The application of these four methods is effective using a sample wind speed data set. With some statistical analysis, a comparison of the accuracy of each method is also performed. The study helps to determine that Energy pattern factor method is the most effective (K = 3.8262 and C = 2.4659).展开更多
Focusing on aerodynamic characteristics of rigid coaxial rotor of a high-speed helicopter in hover and forward flight, a wind tunnel test is conducted in the 8 m ? 6 m low-speed straightflow wind tunnel of China Aerod...Focusing on aerodynamic characteristics of rigid coaxial rotor of a high-speed helicopter in hover and forward flight, a wind tunnel test is conducted in the 8 m ? 6 m low-speed straightflow wind tunnel of China Aerodynamics Research and Development Center. In the experiment,a 4 m diameter composite model rigid coaxial rotor is designed and manufactured, and firstorder flapping frequency ratio of the blade is 1.796 to ensure sufficient stiffness at the blade root.Rotor aerodynamic performance is measured under hovering and high advance ratio conditions.Also, the numerical method is used to calculate aerodynamic characteristics in typical states of the rigid coaxial rotor for analysis purpose. The rotor lift-drag ratio and lateral lift offset in the experiment are emphatically analyzed for the rigid coaxial rotor. The results indicate that in forward flight condition, the rotor lift-drag ratio first increases and then decreases with the increment of advance ratio and lift offset. When advance ratio remains constant, with the increment of lift offset, the lift-drag ratio of rigid coaxial rotor first increases and then decreases.展开更多
基金National Natural Science Foundation of China (50475099)
文摘Owing to the advantages of wire-driven parallel manipulator, a new wire-driven parallel suspension system for airplane model in low-speed wind tunnel is constructed, and the methods to measure and calculate the aerodynamic parameters of the airplane model are studied. In detail, a static model of the wire-driven parallel suspension is analyzed, a mathematical model for describ- ing the aerodynamic loads exerted on the scale model is constructed and a calculation method for obtaining the aerodynamic parameters of the model by measuring the tension of wires is presented. Moreover, the measurement system for wire tension and its corresponding data acquisition system are designed and built. Thereafter, the wire-driven parallel suspension system is placed in an open return circuit low-speed wind tunnel for wind tunnel tests to acquire data of each wire tension when the airplane model is at different attitudes and different wind speeds. A group of curves about the parameters for aerodynamic load exerted on the airplane model are obtained at different wind speeds after the acquired data are analyzed. The research results validate the feasibility of using a wire-driven parallel manipulator as the suspension system for low-speed wind ttmnel tests.
基金National Natural Science Foundation of China Under Grant No. 50278029
文摘Combining the computational fluid dynamics-based numerical simulation with the forced vibration technique for extraction of aerodynamic derivatives, an approach for calculating the aerodynamic derivatives and the critical flutter wind speed for long-span bridges is presented in this paper. The RNG k-ε turbulent model is introduced to establish the governing equations, including the continuity equation and the Navier-Stokes equations, for solving the wind flow field around a two-dimensional bridge section. To illustrate the effectiveness and accuracy of the proposed approach, a simple application to the Hume Bridge in China is provided, and the numerical results show that the aerodynamic derivatives and the critical flutter wind speed obtained agree well with the wind tunnel test results.
文摘This paper develops the modeling of wind speed by Weibull distribution in the intention to evaluate wind energy potential and help for designing small wind energy plant in Batouri in Cameroon. The Weibull distribution model was developed using wind speed data collected from a metrological station at the small Airport of Batouri. Four numerical methods (Moment method, Graphical method, Empirical method and Energy pattern factor method) were used to estimate weibull parameters K and C. The application of these four methods is effective using a sample wind speed data set. With some statistical analysis, a comparison of the accuracy of each method is also performed. The study helps to determine that Energy pattern factor method is the most effective (K = 3.8262 and C = 2.4659).
文摘Focusing on aerodynamic characteristics of rigid coaxial rotor of a high-speed helicopter in hover and forward flight, a wind tunnel test is conducted in the 8 m ? 6 m low-speed straightflow wind tunnel of China Aerodynamics Research and Development Center. In the experiment,a 4 m diameter composite model rigid coaxial rotor is designed and manufactured, and firstorder flapping frequency ratio of the blade is 1.796 to ensure sufficient stiffness at the blade root.Rotor aerodynamic performance is measured under hovering and high advance ratio conditions.Also, the numerical method is used to calculate aerodynamic characteristics in typical states of the rigid coaxial rotor for analysis purpose. The rotor lift-drag ratio and lateral lift offset in the experiment are emphatically analyzed for the rigid coaxial rotor. The results indicate that in forward flight condition, the rotor lift-drag ratio first increases and then decreases with the increment of advance ratio and lift offset. When advance ratio remains constant, with the increment of lift offset, the lift-drag ratio of rigid coaxial rotor first increases and then decreases.
