Metasurfaces composed of two-dimensional nanopillar arrays can manipulate light fields in desirable ways and exhibit the unique advantage of beam steering.Here,we experimentally demonstrate a metasurface-based wide-an...Metasurfaces composed of two-dimensional nanopillar arrays can manipulate light fields in desirable ways and exhibit the unique advantage of beam steering.Here,we experimentally demonstrate a metasurface-based wide-angle broadband all-dielectric blazed grating with an extreme incident angle of up to 80°,which is achieved by optimizing the wide-angle phase shifts and transmissivities of the unit cells.It exhibits a maximum diffraction efficiency of 72%and a high average efficiency of 64%over a wide range of incident angles from−80° to 45° at 1.55μm.Moreover,the proposed grating has a broad bandwidth of 200 nm(1.45-1.65μm),and average efficiencies of more than 50%can be achieved experimentally over the same incidence angles.Our results may pave the way for the creation of novel and efficient flat optical devices for wavefront control.展开更多
The emergent metagrating,with its unique and flexible beam shaping capabilities,offers new paths to efficient modulation of acoustic waves.In this work,an acoustic metagrating is demonstrated for high-efficiency and w...The emergent metagrating,with its unique and flexible beam shaping capabilities,offers new paths to efficient modulation of acoustic waves.In this work,an acoustic metagrating is demonstrated for high-efficiency and wide-angle anomalous refraction.It is shown that the normal reflection and transmission can be totally suppressed by properly modulating the amplitude and phase characteristics of the metagrating supercells for high-efficiency anomalous refraction.The anomalous refraction behavior is achieved in the wide range of incident angles from 28°to 78°,and the efficiency of-1st order diffraction is higher than 90%by finely designing the metagrating structure.The anomalous refraction behaviors are verified experimentally at incidence angle of 28°,45°,and 78°,respectively.The demonstrated metagrating is anticipated to possess efficient wide-angle composite wavefront engineering applications in such fields as communications.展开更多
The seawater column is typically taken as a homogeneous velocity layer in wide-angle crustal seismic surveys in marine environments. However, heterogeneities in salinity and temperature throughout the seawater layer r...The seawater column is typically taken as a homogeneous velocity layer in wide-angle crustal seismic surveys in marine environments. However, heterogeneities in salinity and temperature throughout the seawater layer result insignificant lateral variations in its seismic velocity, especially in deep marine environments. Failure to compensate for these velocity inhomogeneities will introduce significant artifacts in constructing crustal velocity models using seismic tomography. In this study, we conduct numerical experiments to investigate the impact of heterogeneous seismic velocities in seawater on tomographic inversion for crustal velocity models. Experiments that include lateral variation in seawater velocity demonstrated that the modeled crustal velocities were contaminated by artifacts from tomographic inversions when assuming a homogeneous water layer. To suppress such artifacts, we propose two strategies：（1） simultaneous inversion of water velocities and the crustal velocities;（2） layer-stripping inversion during which to first invert for seawater velocity and then correct the travel times before inverting for crustal velocities. The layer-stripping inversion significantly improves the modeling of variation in seawater velocity when preformed with seismic sensors deployed on the ocean bottom and in the water column. Such strategies improve crustal modeling via wide-angle seismic surveys in deep-marine environment.展开更多
In order to deal with torque pulsation problem caused by traditional control method for brushless DC （BLDC） motor and to achieve high precision and good stability, a novel control strategy is proposed. Compared with...In order to deal with torque pulsation problem caused by traditional control method for brushless DC （BLDC） motor and to achieve high precision and good stability, a novel control strategy is proposed. Compared with the traditional control scheme, by using phase voltage as a control objective and making waveform of phase current approximately quasi-sinusoidal, torque ripple of BLDC motor is reduced from the original 14% to 3.4%, while toque is increased by 3.8%. Furthermore, by detecting zero-crossings of back electromotive force （BEMF） with non-conducting phases, sensorless control is realized. The new control strategy is simple. It can minimize torque ripple, increase torque, and realize sensorless control for BLDC motor. Simulation and experiments show good performance of BLDC motor by using the new control method.展开更多
The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 5...The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 545-kmlong active-source ocean bottom seismometer(OBS)wide-angle reflection/refraction profile in the East China Sea.The P wave velocity model shows that the Moho depth rises significantly,from approximately 30 km in the East China Sea shelf to approximately 16 km in the axis of the Okinawa Trough.The lower crustal high-velocity zone(HVZ)in the southern Okinawa Trough,with V_(p) of 6.8-7.3 km/s,is a remarkable manifestation of the mantle material upwelling and accretion to the lower crust.This confirms that the lower crustal high-velocity mantle accretion is developed in the southern Okinawa Trough.During the process of back-arc extension,the crustal structure of the southern Okinawa Trough is completely invaded and penetrated by the upper mantle material in the axis region.In some areas of the southern central graben,the crust may has broken up and entered the initial stage of seafloor spreading.The discontinuous HVZs in the lower crust in the back-arc region also indicate the migration of spreading centers in the back-arc region since the Cenozoic.The asthenosphere material upwelling in the continent-ocean transition zone is constantly driving the lithosphere eastward for episodic extension,and is causing evident tectonic migration in the Western Pacific back-arc region.展开更多
A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental m...A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.展开更多
The South Yellow Sea basin is filled with Mesozoic-Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic-Palaeozoic marine sediments.Conventional multi-channel seismic data cannot describe the velocity ...The South Yellow Sea basin is filled with Mesozoic-Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic-Palaeozoic marine sediments.Conventional multi-channel seismic data cannot describe the velocity structure of the marine residual basin in detail,leading to the lack of a deeper understanding of the distribution and lithology owing to strong energy shielding on the top interface of marine sediments.In this study,we present seismic tomography data from ocean bottom seismographs that describe the NEE-trending velocity distributions of the basin.The results indicate that strong velocity variations occur at shallow crustal levels.Horizontal velocity bodies show good correlation with surface geological features,and multi-layer features exist in the vertical velocity framework(depth:0–10 km).The analyses of the velocity model,gravity data,magnetic data,multichannel seismic profiles,and drilling data showed that high-velocity anomalies(>6.5 km/s)of small(thickness:1–2 km)and large(thickness:>5 km)scales were caused by igneous complexes in the multi-layer structure,which were active during the Palaeogene.Possible locations of good Mesozoic and Palaeozoic marine strata are limited to the Central Uplift and the western part of the Northern Depression along the wide-angle ocean bottom seismograph array.Following the Indosinian movement,a strong compression existed in the Northern Depression during the extensional phase that caused the formation of folds in the middle of the survey line.This study is useful for reconstructing the regional tectonic evolution and delineating the distribution of the marine residual basin in the South Yellow Sea basin.展开更多
The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity...The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.展开更多
AIM：To compare the effects of scleral buckling using wide-angle viewing systems（WAVS） with that using indirect ophthalmoscope for the treatment of rhegmatogenous retinal detachment.METHODS：The study was a retrospe...AIM：To compare the effects of scleral buckling using wide-angle viewing systems（WAVS） with that using indirect ophthalmoscope for the treatment of rhegmatogenous retinal detachment.METHODS：The study was a retrospective analyses of the medical records of 94 eyes（94 patients） with rhegmatogenous retinal detachment.Among them,47 eyes underwent scleral buckling using WAVS with endoiiluminator（Group W）,and 47 eyes underwent scleral buckling using indirect ophthalmoscope（Group I）.Surgical durations,primary success rate,best-corrected visual acuities（BCVA）,delayed subretinal fluid absorptions and surgical complications were compared between the two groups.RESULTS：At baseline,there were no statistical differences between the two groups in patient＇s age（P=0.997）,gender（P=0.853）,symptom duration（P=0.216）,BCVA（P=0.389）,refractive error（P=0.167）,intraocular pressure（P=0.595）,the number of retinal breaks（P=0.832）,the extent of retinal detachment（P =0.246）,subretinal demarcation line（P=0.801）,and macular detachment（P=0.811）.The follow-up period was 12 mo.The surgical durations in Group W（with or without encircling buckling） were significant shorter than those in Group I（P〈0.001 respectively）.The primary success rate was94.27%in Group W,which was similar to that in Group I（92.38%,P=0.931）.The BCVA in Group W was better than that in Group I（P〈0.001） at 1-month follow-up visit.However,there were no significant differences between the two groups at 3-month（P=0.221）,6-month（P =0.674）,and 12-month（P=0.363） follow-up visits respectively.Delayed subretinal fluid absorptions were more common in Group I than in Group W at 1-month（P=0.045） follow-up visit,but there were no significant differences between the two groups at 3-month（P=0.111）,6-month（P =1.000） and 12-month follow-up visits respectively.CONCLUSION：Scleral buckling using WAVS can be an alternative choose for rhegmatogenous retinal detachment展开更多
Polarity reversals may occur to transmitted P waves if the incidence angle is greater than the critical incidence angle. We analyze the characteristics of reflection and transmission coefficients under the condition o...Polarity reversals may occur to transmitted P waves if the incidence angle is greater than the critical incidence angle. We analyze the characteristics of reflection and transmission coefficients under the condition of wide incidence angle based on Zoeppritz equations. We find that for specific conditions, as the incidence angle increases, the characteristic curve of the transmitted P-wave coefficient enters the third quadrant from the first quadrant through the origin, which produces a transition in the transmitted P wave and the corresponding coefficient experiences polarity reversal. We derive the incidence angle when the transmitted P-wave coefficient is zero and verify that it equals zero by using finite-difference forward modeling for a single-interface model. We replace the water in the model reservoir by gas and see that the reservoir P-wave velocity and density decrease dramatically. By analyzing the synthetic seismogram of the transmitted P wave in the single-interface model, we show that the gas-saturated reservoir is responsible for polarity reversal.展开更多
In the practical application,a wide-angle absorption with simple structure is still crucial property of metamaterial absorbers(MAs).A single-band infrared MA is introduced to analyze the angle insensitive mechanism.Nu...In the practical application,a wide-angle absorption with simple structure is still crucial property of metamaterial absorbers(MAs).A single-band infrared MA is introduced to analyze the angle insensitive mechanism.Numerical simulation reveals that a perfect absorption peak with 99.9%(7.55μm)is achieved at normal incidence,as well as the absorptivity is respectively 69.7%(7.46μm)and 93.5%(7.46μm)for transverse electric(TE)and transverse magnetic(TM)modes at 70°incidence.By changing substrate thickness,the absorption ratio at 70°is increased to 91%(7.46μm)for TE mode.Our design can also keep the good absorption stability for the geometric parameters.The E z-field distributions for different incident angles are given to investigate the physical mechanism.The designed MA can realize good wide-angle tolerance.This MA owns great applications,including infrared spectroscopy,solar harvester and plasmonic sensors.展开更多
Firstly,the relationship between the accuracy of low altitude aerial photogrammetry and the field angle of camera is made by a quantitative analysis from the theory.The conclusion that the low altitude photogrammetry ...Firstly,the relationship between the accuracy of low altitude aerial photogrammetry and the field angle of camera is made by a quantitative analysis from the theory.The conclusion that the low altitude photogrammetry should use wide-angle camera as much as possible is done.Then,the limitation of the single lens camera to expand field angle and the combined wide-angle camera existing on the market not suitable for light load of low altitude UAV(Unmanned Aerial Vehicle)due to excessive weight are pointed out.The characteristics of combined wide-angle low altitude light camera with self-calibration and self-stabilization developed by the author are described,especially the principle of self-calibration for the combination of static error and dynamic error.Based on the practice of large scale mapping,a technical procedure in aerial photography by taking with wide-angle camera and large overlap simultaneously for improving the accuracy of low altitude photogrammetry is proposed.The typical engineering produced data is used to verity the above theoretical analysis.A technical route for increasing accuracy of low altitude photogrammetry with combined wide-angle camera is expounded.展开更多
The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a geneti...The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization.展开更多
For potential military applications, a flexible metamaterial absorber(MMA) working on whole K-bands with totalthickness of 3.367 mm, ultra-broadband, polarization-insensitive, and wide-angle stability is presented bas...For potential military applications, a flexible metamaterial absorber(MMA) working on whole K-bands with totalthickness of 3.367 mm, ultra-broadband, polarization-insensitive, and wide-angle stability is presented based on frequencyselective surface(FSS). The absorber is composed of polyvinyl chloride(PVC) layer, polyimide(PI) layer, and poly tetra fluoro ethylene(PTFE) layer, with a sandwich structure of PVC–PI–PTFE–metal plate. Periodic conductive patterns play a crucial role in the absorber, and in traditional, it is designed on the upper surface of PI layer to form LC resonance. Different from commonly absorber, all the patterns are located on the lower surface of the PI layer in this work, and hence the impedance matching and absorptivity are improved in this purposed absorber. The flexible absorber with patterns on lower surface of the PI layer is compared with that on upper surface of the PI layer, the difference and the reasons are explained by absorption mechanism based on equivalent circuit model, and surface current density and electric field distribution are used to analyze resonance peaks. Absorptivity is greater than 90% in a frequency range of 10.47 GHz–45.44 GHz with relative bandwidth of 125.1%, covering the whole Ku, K, Ka, and some of X, U bands, especially containing the whole K bands from 12 GHz to 40 GHz. Radar cross section(RCS) is reduced at least 10 dB in 11.48 GHz–43.87 GHz frequency ranges,and absorption remained about 90% when the incident angle changed from 0°to 55°. The purposed absorber is fabricated,measured, and experiment results show good agreement with theoretical analysis and numerical simulation. After bonded on outer surface of different cylinders with diameters of 200 mm and 100 mm, the absorption of MMA is approximately reduced 10% and 20% respectively, which shows good conformal character with surface of various curvatures. Due to the attractive performance on strong absorption in the whole K-bands, flexible and easy conformal, our design exhibits broad potential application in radar stealth and sensors.展开更多
In this paper, the reactive splitter network and meta-surface are proposed to radiate the wide-beam isolated element pattern and suppress mutual coupling (MC) of the low-profile phased array with the triangular lattic...In this paper, the reactive splitter network and meta-surface are proposed to radiate the wide-beam isolated element pattern and suppress mutual coupling (MC) of the low-profile phased array with the triangular lattice, respectively. Thus, broadband wide-angle impedance matching (WAIM) is imple-mented to promote two-dimensional (2D) wide scanning. For the isolated element, to radiate the wide-beam patterns approximat-ing to the cosine form, two identical slots backed on one sub-strate integrated cavity are excited by the feeding network con-sisting of a reactive splitter and two striplines connected with splitter output paths. For adjacent elements staggered with each other, with the metasurface superstrate, the even-mode cou-pling voltages on the reactive splitter are cancelled out, yielding reduced MC. With the suppression of MC and the compensa-tion of isolated element patterns, WAIM is realized to achieve 2D wide-angle beam steering up to ± 65° in E-plane, ± 45° in H-plane and ± 60° in D-plane from 4.9 GHz to 5.85 GHz.展开更多
Radio antenna arrays have many advantages for astronomical observations,such as high resolution,high sensitivity,multi-target simultaneous observation,and flexible beam formation.Problems surrounding key indices,such ...Radio antenna arrays have many advantages for astronomical observations,such as high resolution,high sensitivity,multi-target simultaneous observation,and flexible beam formation.Problems surrounding key indices,such as sensitivity enhancement,scanning range extension,and sidelobe level suppression,need to be solved urgently.Here,we propose a sparse optimization scheme based on a genetic algorithm for a 64-array element planar radio antenna array.As optimization targets for the iterative process of the genetic algorithm,we use the maximum sidelobe levels and beamwidth of multiple cross-section patterns that pass through the main beam in three-dimensions,with the maximum sidelobe levels of the patterns at several different scanning angles.Element positions are adjusted for iterations,to select the optimal array configuration.Following sparse layout optimization,the simulated 64-element planar radio antenna array shows that the maximum sidelobe level decreases by 1.79 dB,and the beamwidth narrows by 3°.Within the scan range of±30°,after sparse array optimization,all sidelobe levels decrease,and all beamwidths narrow.This performance improvement can potentially enhance the sensitivity and spatial resolution of radio telescope systems.展开更多
In this paper,a method for designing supermassive sparse phased arrays(SMSPAs)known as the unitary modified matrix enhancement and matrix pencil(UMMEMP)method is proposed.In this method,an eigenvalue pairing method,wh...In this paper,a method for designing supermassive sparse phased arrays(SMSPAs)known as the unitary modified matrix enhancement and matrix pencil(UMMEMP)method is proposed.In this method,an eigenvalue pairing method,which is inspired by the modified MEMP,effectively pairs the repeated eigenvalues intractable in the unitary matrix pencil method,and it is more effective in determining the locations of elements in the sparse array.Three numerical examples and a full-wave validation are presented to demonstrate the effectiveness of the method,implemented via SMSPA,in achieving low sidelobe level wide-angle scanning radiation patterns,circular flattop radiation patterns,and ultra wide-angle scanning radiation patterns.展开更多
Metalenses are essential components in terahertz imaging systems.However,without careful design,they show limited field of view and their practical applications are hindered.Here,a wide-angle metalens is proposed whos...Metalenses are essential components in terahertz imaging systems.However,without careful design,they show limited field of view and their practical applications are hindered.Here,a wide-angle metalens is proposed whose structure is optimized for focusing within the incident angles of±25°.Simulation and experiment results show that the focusing efficiency,spot size,and modulation transfer function of this lens are not sensitive to the incident angle.More importantly,this wide-angle metalens follows the ideal Gaussian formula for the object-image relation,which ensures a wider field of view and better contrast in the imaging experiment.展开更多
Based on the principle of super-symmetric lens with quadratic phase gradient transformation, combined with the principle of digital coding of metasurface, we propose a wide-angle coded metalens for focusing control in...Based on the principle of super-symmetric lens with quadratic phase gradient transformation, combined with the principle of digital coding of metasurface, we propose a wide-angle coded metalens for focusing control in two-dimensional space. This metalens achieves focus shift in the x-direction by changing the oblique incidence angle of the incident wave,and focus control in the y-direction by combining with the convolution principle of the digitally coded metasurface to achieve flexible control of light focusing in the two-dimensional plane. The metasurface unit is mainly composed of threelayer of metal structure and two layers of medium, and the transmission phase is obtained by changing the middle layer of metal structure, which in turn obtains the required phase distribution of the metalens. The design of the metalens realizes the function of the lens with a large viewing angle at the x-polarized incidence, and realizes two-dimensional focus control. Experimentally, we prepared the designed coding metalens and tested the focus control function of the wide-angle coding metalens. The experimental results are in good agreement with the design results.展开更多
The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle ref...The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle reflection/refraction as well as deep seismic reflection in the region, which is the first synthetic profile in China, its fine velocity structure and geometric structure from the ground to Moho discontinuity is obtained. The result shows that the crust is obviously layered with a thickness of about 32 km. Basically, it consists of two parts: upper crust and lower crust. The velocity of the upper crust is 5.9-6.2 km/s in which there is a 3-4-km-thick weak low-velocity layer between the depths of 10-15 km, while the velocity of the lower crust in the range of 6.3-7.2 km/s. There exists a strong velocity gradient layer about 3 km thick above the Moho discontinuity whose velocity increases from 6.5 to 7.27 km/s. There exist high-angle normal faults that are small in size and extend only in the shallow crust. These faults are the secondary developed on the hanging wall of westward dipping low-angle normal faults. Thus, their seismogenic ability is limited, however, there exists a high-angle deep fault in the crust from Changle-Zaoan fault zone to seashore fault zone. This deep fault has cut the interface between the upper and lower crusts and Moho discontinuity, and may be the deep structure to trigger destructive earthquake source in future to affect Fuzhou City. These results have advanced the detecting precision of the deep structure in the southeastern coastal seismic zone of the mainland of China. In the aspect of the combined feature of the deep and shallow extensional structures that consist of the westward dipping low-angle normal faults and secondary normal faults on their hanging walls in the upper crust, it is firstly obtained that a united structural interpretation has deepened the knowledge about the deep dynamic process in the southeastern coastal seismic zone. At the same time, in synthetic application of deep seismic detecting methods for deep tectonic background, it possesses a wide referenced meaning to the other regions.展开更多
基金support by the Advanced Integrated Optoelectronics Facility at Tianjin University
文摘Metasurfaces composed of two-dimensional nanopillar arrays can manipulate light fields in desirable ways and exhibit the unique advantage of beam steering.Here,we experimentally demonstrate a metasurface-based wide-angle broadband all-dielectric blazed grating with an extreme incident angle of up to 80°,which is achieved by optimizing the wide-angle phase shifts and transmissivities of the unit cells.It exhibits a maximum diffraction efficiency of 72%and a high average efficiency of 64%over a wide range of incident angles from−80° to 45° at 1.55μm.Moreover,the proposed grating has a broad bandwidth of 200 nm(1.45-1.65μm),and average efficiencies of more than 50%can be achieved experimentally over the same incidence angles.Our results may pave the way for the creation of novel and efficient flat optical devices for wavefront control.
基金Project supported by the National Key Research and Development Program of China(Grant Nos.2023YFB3811400 and 2022YFB3806000)the National Natural Science Foundation of China(Grant No.12074314)+1 种基金the Science and Technology New Star Program of Shaanxi Province,China(Grant No.2023KJXX-148)the Fundamental Research Funds for the Central Universities。
文摘The emergent metagrating,with its unique and flexible beam shaping capabilities,offers new paths to efficient modulation of acoustic waves.In this work,an acoustic metagrating is demonstrated for high-efficiency and wide-angle anomalous refraction.It is shown that the normal reflection and transmission can be totally suppressed by properly modulating the amplitude and phase characteristics of the metagrating supercells for high-efficiency anomalous refraction.The anomalous refraction behavior is achieved in the wide range of incident angles from 28°to 78°,and the efficiency of-1st order diffraction is higher than 90%by finely designing the metagrating structure.The anomalous refraction behaviors are verified experimentally at incidence angle of 28°,45°,and 78°,respectively.The demonstrated metagrating is anticipated to possess efficient wide-angle composite wavefront engineering applications in such fields as communications.
基金supported by the National Natural Science Foundation of China (No.41230318)the Natural Science Foundation of Shandong Province (No.ZR2014DM006)+1 种基金the China Postdoctoral Science Foundation (No.2015M582138)the Scientific Research Foundation for the Returned Overseas Chinese Scholars,Ministry of Education
文摘The seawater column is typically taken as a homogeneous velocity layer in wide-angle crustal seismic surveys in marine environments. However, heterogeneities in salinity and temperature throughout the seawater layer result insignificant lateral variations in its seismic velocity, especially in deep marine environments. Failure to compensate for these velocity inhomogeneities will introduce significant artifacts in constructing crustal velocity models using seismic tomography. In this study, we conduct numerical experiments to investigate the impact of heterogeneous seismic velocities in seawater on tomographic inversion for crustal velocity models. Experiments that include lateral variation in seawater velocity demonstrated that the modeled crustal velocities were contaminated by artifacts from tomographic inversions when assuming a homogeneous water layer. To suppress such artifacts, we propose two strategies：（1） simultaneous inversion of water velocities and the crustal velocities;（2） layer-stripping inversion during which to first invert for seawater velocity and then correct the travel times before inverting for crustal velocities. The layer-stripping inversion significantly improves the modeling of variation in seawater velocity when preformed with seismic sensors deployed on the ocean bottom and in the water column. Such strategies improve crustal modeling via wide-angle seismic surveys in deep-marine environment.
基金Project supported by the Shanghai Leading Academic Discipline Project (Grant No.T0103)
文摘In order to deal with torque pulsation problem caused by traditional control method for brushless DC （BLDC） motor and to achieve high precision and good stability, a novel control strategy is proposed. Compared with the traditional control scheme, by using phase voltage as a control objective and making waveform of phase current approximately quasi-sinusoidal, torque ripple of BLDC motor is reduced from the original 14% to 3.4%, while toque is increased by 3.8%. Furthermore, by detecting zero-crossings of back electromotive force （BEMF） with non-conducting phases, sensorless control is realized. The new control strategy is simple. It can minimize torque ripple, increase torque, and realize sensorless control for BLDC motor. Simulation and experiments show good performance of BLDC motor by using the new control method.
基金supported by the National Key Basic Research Program of China(Grant No.2013CB429701)the National Natural Science Foundation of China(Grant Nos.41606083,91958210,41606050 and 41210005)+1 种基金AoShan Technological Innovation Projects of National Laboratory for Marine Science and Technology(Qingdao)(2015ASKJ03)National Marine Geological Special Project(DD20190236,DD20190365,DD20190377)。
文摘The marginal sea and back-arc basins in the Western Pacific Ocean have become the focus of tectonics due to their unique tectonic location.To understand the deep crustal structure in the back-arc region,we present a 545-kmlong active-source ocean bottom seismometer(OBS)wide-angle reflection/refraction profile in the East China Sea.The P wave velocity model shows that the Moho depth rises significantly,from approximately 30 km in the East China Sea shelf to approximately 16 km in the axis of the Okinawa Trough.The lower crustal high-velocity zone(HVZ)in the southern Okinawa Trough,with V_(p) of 6.8-7.3 km/s,is a remarkable manifestation of the mantle material upwelling and accretion to the lower crust.This confirms that the lower crustal high-velocity mantle accretion is developed in the southern Okinawa Trough.During the process of back-arc extension,the crustal structure of the southern Okinawa Trough is completely invaded and penetrated by the upper mantle material in the axis region.In some areas of the southern central graben,the crust may has broken up and entered the initial stage of seafloor spreading.The discontinuous HVZs in the lower crust in the back-arc region also indicate the migration of spreading centers in the back-arc region since the Cenozoic.The asthenosphere material upwelling in the continent-ocean transition zone is constantly driving the lithosphere eastward for episodic extension,and is causing evident tectonic migration in the Western Pacific back-arc region.
基金supported by the Chinese Academy of Sciences (KZCX2-YW-132)the National Natural Sciences Foundation of China(40721003, 40830315)
文摘A 400 km-long wide-angle seismic experiment along Lianxian-Gangkou profile in South China was carried out to study contact relationship between southeast continental margin of Yangtze block and northwest continental margin of Cathaysia block. We reconstructed crustal wide-angle reflection structure by the depth-domain pre-stack migration and the crustal velocity model constructed from the traveltime fitting. The wide-angle reflection section shows different reflection （from crystalline basement and Moho） pattern beneath the Yangtze and Cathaysia blocks, and suggests the Wuchuan-Sihui fault is the boundary between them. A cluster of well-developed reflections on Moho and in its underlying topmost mantle probably comes from alternative thin layers, which may be seismic signature of strong interaction between crust and mantle in the tectonic environment of lithosphere extension.
基金The National Natural Science Foundation of China under contract No.41806048the Open Fund of the Hubei Key Laboratory of Marine Geological Resources under contract No.MGR202009+2 种基金the Fund from the Key Laboratory of Deep-Earth Dynamics of Ministry of Natural Resource,Institute of Geology,Chinese Academy of Geological Sciences under contract No.J1901-16the Aoshan Science and Technology Innovation Project of Pilot National Laboratory for Marine Science and Technology(Qingdao)under contract No.2015ASKJ03-Seabed Resourcesthe Fund from the Korea Institute of Ocean Science and Technology(KIOST)under contract No.PE99741.
文摘The South Yellow Sea basin is filled with Mesozoic-Cenozoic continental sediments overlying pre-Palaeozoic and Mesozoic-Palaeozoic marine sediments.Conventional multi-channel seismic data cannot describe the velocity structure of the marine residual basin in detail,leading to the lack of a deeper understanding of the distribution and lithology owing to strong energy shielding on the top interface of marine sediments.In this study,we present seismic tomography data from ocean bottom seismographs that describe the NEE-trending velocity distributions of the basin.The results indicate that strong velocity variations occur at shallow crustal levels.Horizontal velocity bodies show good correlation with surface geological features,and multi-layer features exist in the vertical velocity framework(depth:0–10 km).The analyses of the velocity model,gravity data,magnetic data,multichannel seismic profiles,and drilling data showed that high-velocity anomalies(>6.5 km/s)of small(thickness:1–2 km)and large(thickness:>5 km)scales were caused by igneous complexes in the multi-layer structure,which were active during the Palaeogene.Possible locations of good Mesozoic and Palaeozoic marine strata are limited to the Central Uplift and the western part of the Northern Depression along the wide-angle ocean bottom seismograph array.Following the Indosinian movement,a strong compression existed in the Northern Depression during the extensional phase that caused the formation of folds in the middle of the survey line.This study is useful for reconstructing the regional tectonic evolution and delineating the distribution of the marine residual basin in the South Yellow Sea basin.
文摘The studies of seismic tomography and wide-angle reflection have been carried out to reveal the velocity structUrebeneath the eastern Dabie orogenic belt. The result from the seismic tomography shows the high velocity bodiesmight be positioned to a depth of only about 1 .5 km below sea level within the Dabie ultra-high pressure metamorphic (UHPM) belt; the fan-profile shows the Shuihou-Wuhe fault, the demarcation between the South Dabieand the North Dabie, slopes to the south-west at a dip angle of about 45° in the bottom of upper crust. The wideangle reflection shows the middle crustal boundaries and the complex features from the lower crust.
基金Supported by the Projects of Henan Health and Family Planning Commission(No.2014005)Henan Health Department(No.201304007)Henan Science and Technology Department(No.142102310110)
文摘AIM：To compare the effects of scleral buckling using wide-angle viewing systems（WAVS） with that using indirect ophthalmoscope for the treatment of rhegmatogenous retinal detachment.METHODS：The study was a retrospective analyses of the medical records of 94 eyes（94 patients） with rhegmatogenous retinal detachment.Among them,47 eyes underwent scleral buckling using WAVS with endoiiluminator（Group W）,and 47 eyes underwent scleral buckling using indirect ophthalmoscope（Group I）.Surgical durations,primary success rate,best-corrected visual acuities（BCVA）,delayed subretinal fluid absorptions and surgical complications were compared between the two groups.RESULTS：At baseline,there were no statistical differences between the two groups in patient＇s age（P=0.997）,gender（P=0.853）,symptom duration（P=0.216）,BCVA（P=0.389）,refractive error（P=0.167）,intraocular pressure（P=0.595）,the number of retinal breaks（P=0.832）,the extent of retinal detachment（P =0.246）,subretinal demarcation line（P=0.801）,and macular detachment（P=0.811）.The follow-up period was 12 mo.The surgical durations in Group W（with or without encircling buckling） were significant shorter than those in Group I（P〈0.001 respectively）.The primary success rate was94.27%in Group W,which was similar to that in Group I（92.38%,P=0.931）.The BCVA in Group W was better than that in Group I（P〈0.001） at 1-month follow-up visit.However,there were no significant differences between the two groups at 3-month（P=0.221）,6-month（P =0.674）,and 12-month（P=0.363） follow-up visits respectively.Delayed subretinal fluid absorptions were more common in Group I than in Group W at 1-month（P=0.045） follow-up visit,but there were no significant differences between the two groups at 3-month（P=0.111）,6-month（P =1.000） and 12-month follow-up visits respectively.CONCLUSION：Scleral buckling using WAVS can be an alternative choose for rhegmatogenous retinal detachment
基金the National Natural Science Foundation of China(No.41374123)
文摘Polarity reversals may occur to transmitted P waves if the incidence angle is greater than the critical incidence angle. We analyze the characteristics of reflection and transmission coefficients under the condition of wide incidence angle based on Zoeppritz equations. We find that for specific conditions, as the incidence angle increases, the characteristic curve of the transmitted P-wave coefficient enters the third quadrant from the first quadrant through the origin, which produces a transition in the transmitted P wave and the corresponding coefficient experiences polarity reversal. We derive the incidence angle when the transmitted P-wave coefficient is zero and verify that it equals zero by using finite-difference forward modeling for a single-interface model. We replace the water in the model reservoir by gas and see that the reservoir P-wave velocity and density decrease dramatically. By analyzing the synthetic seismogram of the transmitted P wave in the single-interface model, we show that the gas-saturated reservoir is responsible for polarity reversal.
文摘In the practical application,a wide-angle absorption with simple structure is still crucial property of metamaterial absorbers(MAs).A single-band infrared MA is introduced to analyze the angle insensitive mechanism.Numerical simulation reveals that a perfect absorption peak with 99.9%(7.55μm)is achieved at normal incidence,as well as the absorptivity is respectively 69.7%(7.46μm)and 93.5%(7.46μm)for transverse electric(TE)and transverse magnetic(TM)modes at 70°incidence.By changing substrate thickness,the absorption ratio at 70°is increased to 91%(7.46μm)for TE mode.Our design can also keep the good absorption stability for the geometric parameters.The E z-field distributions for different incident angles are given to investigate the physical mechanism.The designed MA can realize good wide-angle tolerance.This MA owns great applications,including infrared spectroscopy,solar harvester and plasmonic sensors.
文摘Firstly,the relationship between the accuracy of low altitude aerial photogrammetry and the field angle of camera is made by a quantitative analysis from the theory.The conclusion that the low altitude photogrammetry should use wide-angle camera as much as possible is done.Then,the limitation of the single lens camera to expand field angle and the combined wide-angle camera existing on the market not suitable for light load of low altitude UAV(Unmanned Aerial Vehicle)due to excessive weight are pointed out.The characteristics of combined wide-angle low altitude light camera with self-calibration and self-stabilization developed by the author are described,especially the principle of self-calibration for the combination of static error and dynamic error.Based on the practice of large scale mapping,a technical procedure in aerial photography by taking with wide-angle camera and large overlap simultaneously for improving the accuracy of low altitude photogrammetry is proposed.The typical engineering produced data is used to verity the above theoretical analysis.A technical route for increasing accuracy of low altitude photogrammetry with combined wide-angle camera is expounded.
文摘The design and fabrication of graded-refractive-index （GRIN） antireflection （AR） coatings with wide-angle and broadband characteristics are demonstrated. The optimization of the graded-index profiles with a genetic algorithm is used in the design of the GRIN AR coatings. The average reflectance over a wavelength range from 400 nm to 800 nm and angles of incidence from 0° to 80° could be reduced to only 0.1% by applying an optimized AR coating onto BK7 glass. The optimization of step-graded GRIN AR coating is then further investigated in detail. A two-layer AR coating was deposited by electron beam evaporation with glancing angle deposition technology, and the positional homogeneity was improved by depositing the film from two opposite directions. The microstructure of the AR coating was investigated by scanning electron microscopy, and the residual reflectances of the coating sample are in agreement with theoretical calculations. The optimized GRIN AR coatings are beneficial to increasing the efficiency of light utilization.
基金Project supported by the Fundamental Research Funds for the Central Universities of China (Grant No. JD2020JGPY0010)the China Post-doctoral Science Foundation (Grant No. 2020M671834)the Anhui Province Post-doctoral Science Foundation, China (Grant No. 2020A397)。
文摘For potential military applications, a flexible metamaterial absorber(MMA) working on whole K-bands with totalthickness of 3.367 mm, ultra-broadband, polarization-insensitive, and wide-angle stability is presented based on frequencyselective surface(FSS). The absorber is composed of polyvinyl chloride(PVC) layer, polyimide(PI) layer, and poly tetra fluoro ethylene(PTFE) layer, with a sandwich structure of PVC–PI–PTFE–metal plate. Periodic conductive patterns play a crucial role in the absorber, and in traditional, it is designed on the upper surface of PI layer to form LC resonance. Different from commonly absorber, all the patterns are located on the lower surface of the PI layer in this work, and hence the impedance matching and absorptivity are improved in this purposed absorber. The flexible absorber with patterns on lower surface of the PI layer is compared with that on upper surface of the PI layer, the difference and the reasons are explained by absorption mechanism based on equivalent circuit model, and surface current density and electric field distribution are used to analyze resonance peaks. Absorptivity is greater than 90% in a frequency range of 10.47 GHz–45.44 GHz with relative bandwidth of 125.1%, covering the whole Ku, K, Ka, and some of X, U bands, especially containing the whole K bands from 12 GHz to 40 GHz. Radar cross section(RCS) is reduced at least 10 dB in 11.48 GHz–43.87 GHz frequency ranges,and absorption remained about 90% when the incident angle changed from 0°to 55°. The purposed absorber is fabricated,measured, and experiment results show good agreement with theoretical analysis and numerical simulation. After bonded on outer surface of different cylinders with diameters of 200 mm and 100 mm, the absorption of MMA is approximately reduced 10% and 20% respectively, which shows good conformal character with surface of various curvatures. Due to the attractive performance on strong absorption in the whole K-bands, flexible and easy conformal, our design exhibits broad potential application in radar stealth and sensors.
基金supported by Sichuan Science and Technology Programs(2022NSFSC0547,2022ZYD0109)the 2020 Open Foundation of Key Laboratory of Cognitive Radio and Information Processing,Ministry of Education(Guilin University of Electronic Technology)(CRKL200201).
文摘In this paper, the reactive splitter network and meta-surface are proposed to radiate the wide-beam isolated element pattern and suppress mutual coupling (MC) of the low-profile phased array with the triangular lattice, respectively. Thus, broadband wide-angle impedance matching (WAIM) is imple-mented to promote two-dimensional (2D) wide scanning. For the isolated element, to radiate the wide-beam patterns approximat-ing to the cosine form, two identical slots backed on one sub-strate integrated cavity are excited by the feeding network con-sisting of a reactive splitter and two striplines connected with splitter output paths. For adjacent elements staggered with each other, with the metasurface superstrate, the even-mode cou-pling voltages on the reactive splitter are cancelled out, yielding reduced MC. With the suppression of MC and the compensa-tion of isolated element patterns, WAIM is realized to achieve 2D wide-angle beam steering up to ± 65° in E-plane, ± 45° in H-plane and ± 60° in D-plane from 4.9 GHz to 5.85 GHz.
基金supported by the Ministry of Science and Technology SKA Special Project(2020SKA0110202)the Special Project on Building a Science and Technology Innovation Center for South and Southeast Asia–International Joint Innovation Platform in Yunnan Province:"Yunnan Sino-Malaysian International Joint Laboratory of HF-VHF Advanced Radio Astronomy Technology"(202303AP140003)+4 种基金the National Natural Science Foundation of China (NSFC) Joint Fund for Astronomy (JFA) incubator program (U2031133)the International Partnership Program Project of the International Cooperation Bureau of the Chinese Academy of Sciences:"Belt and Road"Cooperation (114A11KYSB20200001)the Kunming Foreign (International) Cooperation Base Program:"Yunnan Observatory of the Chinese Academy of Sciences-University of Malaya Joint R&D Cooperation Base for Advanced Radio Astronomy Technology"(GHJD-2021022)the China-Malaysia Collaborative Research on Space Remote Sensing and Radio Astronomy Observation of Space Weather at Low and Middle Latitudes under the Key Special Project of the State Key R&D Program of the Ministry of Science and Technology for International Cooperation in Science,Technology and Innovation among Governments (2022YFE0140000)the High-precision calibration method for low-frequency radio interferometric arrays for the SKA project of the Ministry of Science and Technology(2020SKA0110300).
文摘Radio antenna arrays have many advantages for astronomical observations,such as high resolution,high sensitivity,multi-target simultaneous observation,and flexible beam formation.Problems surrounding key indices,such as sensitivity enhancement,scanning range extension,and sidelobe level suppression,need to be solved urgently.Here,we propose a sparse optimization scheme based on a genetic algorithm for a 64-array element planar radio antenna array.As optimization targets for the iterative process of the genetic algorithm,we use the maximum sidelobe levels and beamwidth of multiple cross-section patterns that pass through the main beam in three-dimensions,with the maximum sidelobe levels of the patterns at several different scanning angles.Element positions are adjusted for iterations,to select the optimal array configuration.Following sparse layout optimization,the simulated 64-element planar radio antenna array shows that the maximum sidelobe level decreases by 1.79 dB,and the beamwidth narrows by 3°.Within the scan range of±30°,after sparse array optimization,all sidelobe levels decrease,and all beamwidths narrow.This performance improvement can potentially enhance the sensitivity and spatial resolution of radio telescope systems.
文摘In this paper,a method for designing supermassive sparse phased arrays(SMSPAs)known as the unitary modified matrix enhancement and matrix pencil(UMMEMP)method is proposed.In this method,an eigenvalue pairing method,which is inspired by the modified MEMP,effectively pairs the repeated eigenvalues intractable in the unitary matrix pencil method,and it is more effective in determining the locations of elements in the sparse array.Three numerical examples and a full-wave validation are presented to demonstrate the effectiveness of the method,implemented via SMSPA,in achieving low sidelobe level wide-angle scanning radiation patterns,circular flattop radiation patterns,and ultra wide-angle scanning radiation patterns.
文摘Metalenses are essential components in terahertz imaging systems.However,without careful design,they show limited field of view and their practical applications are hindered.Here,a wide-angle metalens is proposed whose structure is optimized for focusing within the incident angles of±25°.Simulation and experiment results show that the focusing efficiency,spot size,and modulation transfer function of this lens are not sensitive to the incident angle.More importantly,this wide-angle metalens follows the ideal Gaussian formula for the object-image relation,which ensures a wider field of view and better contrast in the imaging experiment.
基金supported in part by the Science and technology innovation leading talent project of special support plan for high-level talents in Zhejiang Province(2021R52032)Natural Science Foundation of Zhejiang Province under grant No.LY22F050001+1 种基金Special project for professional degree postgraduates of Zhejiang Provincial Education Department(No.Y202353663,Y202353686)in part by the National Natural Science Foundation of China under grant No.62175224.China Jiliang University Basic Research Expenses.
文摘Based on the principle of super-symmetric lens with quadratic phase gradient transformation, combined with the principle of digital coding of metasurface, we propose a wide-angle coded metalens for focusing control in two-dimensional space. This metalens achieves focus shift in the x-direction by changing the oblique incidence angle of the incident wave,and focus control in the y-direction by combining with the convolution principle of the digitally coded metasurface to achieve flexible control of light focusing in the two-dimensional plane. The metasurface unit is mainly composed of threelayer of metal structure and two layers of medium, and the transmission phase is obtained by changing the middle layer of metal structure, which in turn obtains the required phase distribution of the metalens. The design of the metalens realizes the function of the lens with a large viewing angle at the x-polarized incidence, and realizes two-dimensional focus control. Experimentally, we prepared the designed coding metalens and tested the focus control function of the wide-angle coding metalens. The experimental results are in good agreement with the design results.
文摘The Fuzhou basin and its vicinities are located at the northern end of the southeastern coastal seismic zone of the mainland of China. By the joint explorations of high-resolution seismic refraction and wide-angle reflection/refraction as well as deep seismic reflection in the region, which is the first synthetic profile in China, its fine velocity structure and geometric structure from the ground to Moho discontinuity is obtained. The result shows that the crust is obviously layered with a thickness of about 32 km. Basically, it consists of two parts: upper crust and lower crust. The velocity of the upper crust is 5.9-6.2 km/s in which there is a 3-4-km-thick weak low-velocity layer between the depths of 10-15 km, while the velocity of the lower crust in the range of 6.3-7.2 km/s. There exists a strong velocity gradient layer about 3 km thick above the Moho discontinuity whose velocity increases from 6.5 to 7.27 km/s. There exist high-angle normal faults that are small in size and extend only in the shallow crust. These faults are the secondary developed on the hanging wall of westward dipping low-angle normal faults. Thus, their seismogenic ability is limited, however, there exists a high-angle deep fault in the crust from Changle-Zaoan fault zone to seashore fault zone. This deep fault has cut the interface between the upper and lower crusts and Moho discontinuity, and may be the deep structure to trigger destructive earthquake source in future to affect Fuzhou City. These results have advanced the detecting precision of the deep structure in the southeastern coastal seismic zone of the mainland of China. In the aspect of the combined feature of the deep and shallow extensional structures that consist of the westward dipping low-angle normal faults and secondary normal faults on their hanging walls in the upper crust, it is firstly obtained that a united structural interpretation has deepened the knowledge about the deep dynamic process in the southeastern coastal seismic zone. At the same time, in synthetic application of deep seismic detecting methods for deep tectonic background, it possesses a wide referenced meaning to the other regions.
