This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SE...This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.展开更多
This study proposes a novel cyclone separator with a conical inner core to enhance particle classification efficiency in oil and gas wellhead-recovered liquids.Particle motion and force dynamics are analyzed to optimi...This study proposes a novel cyclone separator with a conical inner core to enhance particle classification efficiency in oil and gas wellhead-recovered liquids.Particle motion and force dynamics are analyzed to optimize key structural parameters,including inlet diameter(D_i),overflow pipe diameter(D_(e)),insertion depth(L_(e)),and bottom flow pipe diameter(D_(z)).Numerical simulations employ the Reynolds stress turbulence model,SIMPLEC algorithm,and discrete phase model to evaluate separation performance in a gas-liquid two-phase system.Results indicate that a smaller D_i improves fine particle separation but increases turbulence;an optimal range of D_i/D_(c)=0.35-0.4 is recommended.Larger D_(e) enhances the diversion ratio,aiding fine particle discharge(D_(e)/D_(c)=0.25-0.35).Increased Le facilitates fine particle overflow but induces vortices,whereas a smaller L_(e) stabilizes the bottom flow for larger particle separation(L_(e)/D_(c)=0.5-0.75).A reduced D_(z) enhances centrifugal force and separation efficiency but may cause turbulence;an optimal D_(z)/D_(c) of 0.6-0.65 is suggested for stability.These findings provide valuable design guidelines for improving cyclone separator performance in multiphase flow applications.展开更多
This study investigates the effect of nacelle motions on the rotor performance and drivetrain dynamics of floating offshore wind turbines(FOWTs)through fully coupled aero-hydro-elastic-servo-mooring simulations.Using ...This study investigates the effect of nacelle motions on the rotor performance and drivetrain dynamics of floating offshore wind turbines(FOWTs)through fully coupled aero-hydro-elastic-servo-mooring simulations.Using the National Renewable Energy Laboratory 5 MW monopile-supported offshore wind turbine and the OC4 DeepCwind semisubmersible wind turbine as case studies,the research addresses the complex dynamic responses resulting from the interaction among wind,waves,and turbine structures.Detailed multi-body dynamics models of wind turbines,including drivetrain components,are created within the SIMPACK framework.Meanwhile,the mooring system is modeled using a lumped-mass method.Various operational conditions are simulated through five wind-wave load cases.Results demonstrate that nacelle motions significantly influence rotor speed,thrust,torque,and power output,as well as the dynamic loads on drivetrain components.These findings highlight the need for advanced simulation techniques for the design and optimization of FOWTs to ensure reliable performance and longevity.展开更多
This study addresses the pressing challenge of generating realistic strong ground motion data for simulating earthquakes,a crucial component in pre-earthquake risk assessments and post-earthquake disaster evaluations,...This study addresses the pressing challenge of generating realistic strong ground motion data for simulating earthquakes,a crucial component in pre-earthquake risk assessments and post-earthquake disaster evaluations,particularly suited for regions with limited seismic data.Herein,we report a generative adversarial network(GAN)framework capable of simulating strong ground motions under various environmental conditions using only a small set of real earthquake records.The constructed GAN model generates ground motions based on continuous physical variables such as source distance,site conditions,and magnitude,effectively capturing the complexity and diversity of ground motions under different scenarios.This capability allows the proposed model to approximate real seismic data,making it applicable to a wide range of engineering purposes.Using the Shandong Pingyuan earthquake as an example,a specialized dataset was constructed based on regional real ground motion records.The response spectrum at target locations was obtained through inverse distance-weighted interpolation of actual response spectra,followed by continuous wavelet transform to derive the ground motion time histories at these locations.Through iterative parameter adjustments,the constructed GAN model learned the probability distribution of strong-motion data for this event.The trained model generated three-component ground-motion time histories with clear P-wave and S-wave characteristics,accurately reflecting the non-stationary nature of seismic records.Statistical comparisons between synthetic and real response spectra,waveform envelopes,and peak ground acceleration show a high degree of similarity,underscoring the effectiveness of the model in replicating both the statistical and physical characteristics of real ground motions.These findings validate the feasibility of GANs for generating realistic earthquake data in data-scarce regions,providing a reliable approach for enriching regional ground motion databases.Additionally,the results suggest that GAN-based networks are a powerful tool for building predictive models in seismic hazard analysis.展开更多
The March 28,2025 Myanmar earthquake generated ground shaking that was perceptible throughout Myanmar and adjacent regions.This study simulated three-component ground motions across the affected region using an improv...The March 28,2025 Myanmar earthquake generated ground shaking that was perceptible throughout Myanmar and adjacent regions.This study simulated three-component ground motions across the affected region using an improved stochastic finite-fault method to systematically assess seismic impacts.Observed near-field recordings at MM.NGU station was used to determine the reliability of the theoretically derived stress drop as input for simulation.Far-field recordings constrained the frequency-dependent S-wave quality factors(Q(f)=283.305f^(0.588))for anelastic attenuation modeling.Comparisons of peak accelerations between simulation and empirical ground-motion models showed good agreement at moderate-to-large distances.However,lower near-fault simulations indicate a weaker-than-average source effect.Analysis of simulated instrumental seismic intensity revealed key patterns.Maximum intensity(Ⅹ)occurred in isolated patches within the ruptured fault projection,correlating with shallow high-slip areas.TheⅨ-intensity zone formed a north-south elongated band centered on fault projection.Significant asymmetry inⅧ-intensity distribution perpendicular to the fault strike was observed,with a wider western extension attributed to lower shear-wave velocities west of the fault.Supershear rupture behavior enhanced ground motions,expanding intensity ranges by~20%compared to sub-shear rupture.This study reveals the integrated effects of fault geometry,slip spatial distribution,rupture velocity,and site condition in governing ground motion patterns.展开更多
Based on the character of the modular self-reconfigurable （MSR） robot, a novel homogeneous and lattice MSR robot, M-Cubes, was designed. Each module unit of the robot has 12 freedoms and is composed of six rotary jo...Based on the character of the modular self-reconfigurable （MSR） robot, a novel homogeneous and lattice MSR robot, M-Cubes, was designed. Each module unit of the robot has 12 freedoms and is composed of six rotary joints and one cubic link. An attached/detached mechanism was designed on the rotary joints. A novel space transmitting system was placed on the inner portion of the cubic link. A motor separately transmitted torque to the six joints which were distributed equally on six surfaces of the cubic link. The example of a basic motion for the module was demonstrated. The result shows that the robot is concise and compact in structure, highly efficient in transmission, credible in connecting, and simple in controlling. At the same time, a simulator is developed to graphically design the system configuration, the reconfiguration process and the motion of cluster modules. The character of local action for the cellular automata （CA） is utilized. Each module is simplified as a cell. The transition rules of the CA are developed to combine with the genetic algorithm （GA） and applied to each module to accomplish distributed control. Simulation proves that the method is effective and feasible.展开更多
The previous study on modeling of the tilt rotor aircraft used to put a premium on the complicated aerodynamic computation, and the research on the motion equations is often constrained to frequently use the oversimpl...The previous study on modeling of the tilt rotor aircraft used to put a premium on the complicated aerodynamic computation, and the research on the motion equations is often constrained to frequently use the oversimplified 6-degree of freedom （DOF） rigid body equations. However, the transfiguration of aircraft during transition stage, is complicated due to the aerodynamic interference and the change of center of gravity （CG）. Moreover, the gyroscopic moment caused by tilting the high-speed revolving rotors seriously interferes with the aircraft attitude. The above-cited 6-DOF single rigid body equations do not take the inertia coupling effects into account during transition. For this sake, the article, reckoning the body, the nacelles and the rotors to be independent entities, establishes a realistic model in the form of multi-body motion equations. First, by applying Newton＇s laws and angular momentum theorem to a mass of elements of the aircraft, the multi-body motion equations in inertial flame as well as in body frame are obtained by integrating over all elements. As the equations are of implicit nonlinear differential type, the consistent initial value problem should be solved. Then, a numerical simulation of the differential equations is conducted by means of the Runge-Kutta-Felhberg integral algorithm. The modeling and the simulation algorithm are verified against the data of XV-15 as an example. The model can be used in the area of flight dynamics, flight control and flight safety of tilt rotor air- craft.展开更多
The design work of motional cable in products is vital due to the difficulty in estimating the potential issues in current researches.In this paper,a physics-based modeling and simulation method for the motional cable...The design work of motional cable in products is vital due to the difficulty in estimating the potential issues in current researches.In this paper,a physics-based modeling and simulation method for the motional cable harness design is presented.The model,based on continuum mechanics,is established by analyzing the force of microelement in equilibrium.During the analysis procedure,three coordinate systems：inertial,Frenet and main-axis coordinate systems are used.By variable substitution and dimensionless processing,the equation set is discretized by differential quadrature method and subsequently becomes an overdetermined nonlinear equation set with boundary conditions solved by Levenberg-Marquardt method.With the profile of motional cable harness obtained from the integral of arithmetic solution,a motion simulation system based on＂path＂and＂profile＂as well as the experimental equipments is built.Using the same parameters as input for the simulation and the real cable harness correspondingly,the issue in designing,such as collision,can be easily found by the simulation system.This research obtains a better result which has no potential collisions by redesign,and the proposed method can be used as an accurate and efficient way in motional cable harness design work.展开更多
In this study, a new mathematical model is developed composed of two parts, including harmonic and polynomial expressions for simulating the dominant velocity pulse of near fault ground motions. Based on a proposed ve...In this study, a new mathematical model is developed composed of two parts, including harmonic and polynomial expressions for simulating the dominant velocity pulse of near fault ground motions. Based on a proposed velocity function, the corresponding expressions for the ground acceleration and displacement time histories are also derived. The proposed model is then fitted using some selected pulse-like near fault ground motions in the Next Generation Attenuation （NGA） project library. The new model is not only simple in form but also simulates the long-period portion of actual velocity near fault records with a high level of precision. It is shown that the proposed model-based elastic response spectra are compatible with the near fault records in the neighborhood of the prevailing frequency of the pulse. The results indicate that the proposed model adequately simulates the components of the time histories. Finally, the energy of the proposed pulse was compared with the energy of the actual record to confirm the compatibility.展开更多
This paper presents a novel approach to model and simulate the multi-support depth-varying seismic motions（MDSMs） within heterogeneous offshore and onshore sites.Based on 1 D wave propagation theory,the three-dimens...This paper presents a novel approach to model and simulate the multi-support depth-varying seismic motions（MDSMs） within heterogeneous offshore and onshore sites.Based on 1 D wave propagation theory,the three-dimensional ground motion transfer functions on the surface or within an offshore or onshore site are derived by considering the effects of seawater and porous soils on the propagation of seismic P waves.Moreover,the depth-varying and spatial variation properties of seismic ground motions are considered in the ground motion simulation.Using the obtained transfer functions at any locations within a site,the offshore or onshore depth-varying seismic motions are stochastically simulated based on the spectral representation method（SRM）.The traditional approaches for simulating spatially varying ground motions are improved and extended to generate MDSMs within multiple offshore and onshore sites.The simulation results show that the PSD functions and coherency losses of the generated MDSMs are compatible with respective target values,which fully validates the effectiveness of the proposed simulation method.The synthesized MDSMs can provide strong support for the precise seismic response prediction and performance-based design of both offshore and onshore large-span engineering structures.展开更多
Corresponding to the sliding and the overturning failure,the elementary motion modes of caisson breakwater include the horizontal-rotational oscillation coupled motion,the horizontal sliding-rotational oscillation cou...Corresponding to the sliding and the overturning failure,the elementary motion modes of caisson breakwater include the horizontal-rotational oscillation coupled motion,the horizontal sliding-rotational oscillation coupled motion,the horizontal vibrating-uplift rocking coupled motion,and the horizontal sliding-uplift rocking coupled motion.The motion mode of a caisson will transform from one to another depending on the wave forces and the motion behaviors of the caisson.The numerical models of four motion modes of caisson are developed,and the numerical simulation procedure for joint motion process of various modes of caisson breakwater under wave excitation is presented and tested by a physical model experiment.It is concluded that the simulation procedure is reliable and can be applied to the dynamic stability analysis of caisson breakwaters.展开更多
The flying-wing underwater glider (UG), shaped as a blended wing body, is a new type of underwater vehicle and still requires further research. The shape layout and the configuration of the internal actuators of the f...The flying-wing underwater glider (UG), shaped as a blended wing body, is a new type of underwater vehicle and still requires further research. The shape layout and the configuration of the internal actuators of the flying-wing UG are different from those of "legacy gliders" which have revolving bodies, and these two factors strongly affect the dynamic performance of the vehicle. Considering these differences, we propose a new configuration of the internal actuators for the flying-wing UG and treat the flying-wing UG as a multi-body system when establishing its dynamic model. In this paper, a detailed dynamic model is presented using the Newton-Euler method for the flying-wing UG. Based on the full dynamic model, the effect of the internal actuators on the steady gliding motion of vehicle is studied theoretically, and the relationship between the state parameters of the steady gliding motion and the controlled variables is obtained by solving a set of equilibrium equations. Finally, the behaviors of two classical motion modes of the glider are analyzed based on the simulation. The simulation results demonstrate that the motion performance of the proposed flying-wing UG is satisfactory.展开更多
A new model to simulate spatially correlated earthquake ground motions is developed. In the model, the main factors that characterize three distinct effects of spatial variability, namely, the incoherency effect, the ...A new model to simulate spatially correlated earthquake ground motions is developed. In the model, the main factors that characterize three distinct effects of spatial variability, namely, the incoherency effect, the wave-passage effect and the site-response effect, are taken into account, and corresponding terms/parameters are incorporated into the well known model of uniform ground motions. Some of these terms/parameters can be determined by the root operation, and others can be calculated directly. The proposed model is first verified theoretically, and examples of ground motion simulations are provided as a further illustration. It is proven that the ensemble expected value and the ensemble auto-/cross-spectral density functions of the simulated ground motions are identical to the target spectral density functions. The proposed model can also be used to simulate other correlated stochastic processes, such as wave and wind loads.展开更多
The mass configuration of the buoyancy-driven underwater glider is decomposed and defined. The coupling between the glider body and its internal masses is addressed using the energy law. A glider motion model is estab...The mass configuration of the buoyancy-driven underwater glider is decomposed and defined. The coupling between the glider body and its internal masses is addressed using the energy law. A glider motion model is established, and the corresponding simulation program is derived using MATLAB. The characteristics of the glider motion are explored using this program. The simula- tion results show that the basic characteristic of a buoyancy-driven underwater glider is the periodic alternation of downward and upward motions. The glider's spiral motion can be applied to missions in restricted regions. The glider's horizontal velocity, gliding depth and its motion radius in spiral motion can be changed to meet different application purposes by using different glider parameter designs. The simulation also shows that the model is appropriate and the program has strong simulation functions.展开更多
The motional payloads on stabilized platform must be linked by some cable harnesses with other immobile apparatus.During the operation of stabilized platform,these cable harnesses can create spring disturbance torque ...The motional payloads on stabilized platform must be linked by some cable harnesses with other immobile apparatus.During the operation of stabilized platform,these cable harnesses can create spring disturbance torque which is exerted on the stabilized platform and then reduce the stabilizing precision.None of current studies can deal with the spring disturbance torque problem.To analyze the spring disturbance toque,a dynamic thin rod model is presented for simulating the motional cable harness which is based on the Kirchhoff rod theorem and can consider the geometrically non-linear effects.The internal bending and torsion restoring torques are simulated and then a predictive analysis of the disturbance torque can be performed in motional cable routing design.This model is solved with differential quadrature method（DQM）.By using zeros of the Chebyshev polynomial as the grid points,the arc-coordinate is discretized to obtain a set of ordinary differential equations in time domain which is solved by implied method to obtain the profile and internal force of cable harness.The accuracy of this model is validated by comparing the simulation results and the experiment results（both the spring force and the deformed profile of the motional cable harness）.In the experiment,a special optical measuring instrument based on binocular vision is developed.The comparison of experimental and simulated results shows that the simulation model can represent the real motional cable harness well,and the spring disturbance force simulation results are precise enough for spring disturbance torque analysis.This study will be helpful to obtain an optimized motional cable harness layout design with small spring disturbance torque.展开更多
The spectral representation method （SRM） is widely used to simulate spatially varying ground motions. This study focuses on the approximation approach to the SRM based on root decomposition, which can improve the ef...The spectral representation method （SRM） is widely used to simulate spatially varying ground motions. This study focuses on the approximation approach to the SRM based on root decomposition, which can improve the efficiency of the simulation. The accuracy of the approximation approach may be affected by three factors： matrix for decomposition, distribution of frequency interpolation nodes and elements for interpolation. The influence of these factors on the accuracy of this approach is examined and the following conclusions are drawn. The SRM based on the root decomposition of the lagged coherency matrix exhibits greater accuracy than the SRM based on the root decomposition of the cross spectral matrix. The equal energy distribution of frequency interpolation nodes proposed in this study is more effective than the counter pith with an equal spacing. Elements for interpolation do not have much of an effect on the accuracy, so interpolation of the elements of the decomposed matrix is recommended because it is less complicated from a computational efficiency perspective.展开更多
Simulating the coupled motions of multiple bodies in the time domain is a complex problem because of the strong hydrodynamic interactions and coupled effect of various mechanical connectors. In this study, we investig...Simulating the coupled motions of multiple bodies in the time domain is a complex problem because of the strong hydrodynamic interactions and coupled effect of various mechanical connectors. In this study, we investigate the hydrodynamic responses of three barges moored side-by-side in a floatover operation in the frequency and time domains. In the frequency domain, the damping lid method is adopted to improve the overestimated hydrodynamic coefficients calculated from conventional potential flow theory. A time-domain computing program based on potential flow theory and impulse theory is compiled for analyses that consider multibody hydrodynamic interactions and mechanical effects from lines and fenders. Correspondingly, an experiment is carried out for comparison with the numerical results. All statistics, time series, and power density spectra from decay and irregular wave tests are in a fairly good agreement.展开更多
In order to analyze the spatial maneuverability of the remotely operated underwater vehicle(ROV),the 6-DOF motion mathematic model of the ROV was founded.Hydrodynamics were analyzed by using the Taylor series.The thru...In order to analyze the spatial maneuverability of the remotely operated underwater vehicle(ROV),the 6-DOF motion mathematic model of the ROV was founded.Hydrodynamics were analyzed by using the Taylor series.The thrusters on the ROV were discussed.This paper considers three cases of motion simulation:vertical motion,rotational motion and Z-shape motion.A series of simulation experiments showed that the 6-DOF motion mathematic model was correct and reliable,and also fit with the scene simulation.展开更多
Accurate modeling and simulation of autonomous underwater vehicle （AUV） is essential for autonomous control and maneuverability research. In this paper, a mini AUV- ＂MAUV-Ⅱ＂ was researched and the nonlinear mathe...Accurate modeling and simulation of autonomous underwater vehicle （AUV） is essential for autonomous control and maneuverability research. In this paper, a mini AUV- ＂MAUV-Ⅱ＂ was researched and the nonlinear mathematic model of the AUV in spatial motion was derived based on momentum theorem. The forces acting on AUV were resolved to several modules which were expressed in matrix form. Based on the motion model and combined with virtual reality technology, a motion simulation system was constructed. Considering the characteristic of ＂MAUV-Ⅱ ＂, the heading control and depth control were simulated by adopting S-surface control method. A long distance traveling simulation experiment based on target planning was also done. The simulation results show that the ＂MAUV-Ⅱ＂ has good spatial maneuverability, and verify the feasibility and reliability of control software.展开更多
An integrated dynamic model of China＇s deep ocean mining system is developed and the fast simulation analysis of its longitudinal reciprocating motion operation processes is achieved. The seafloor tracked miner is bu...An integrated dynamic model of China＇s deep ocean mining system is developed and the fast simulation analysis of its longitudinal reciprocating motion operation processes is achieved. The seafloor tracked miner is built as a three-dimensional single-body model with six-degree-of-freedom. The track-terrain interaction is modeled by partitioning the track-terrain interface into a certain number of mesh elements with three mutually perpendicular forces, including the normal force, the longitudinal shear force and the lateral shear force, acting on the center point of each mesh element. The hydrodynamic force of the miner is considered and applied. By considering the operational safety and collection efficiency, two new mining paths for the miner on the seafloor are proposed, which can be simulated with the established single-body dynamic model of the miner. The pipeline subsystem is built as a three-dimensional multi-body discrete element model, which is divided into rigid elements linked by flexible connectors. The flexible connector without mass is represented by six spring-damper elements. The external hydrodynamic forces of the ocean current from the longitudinal and lateral directions are both considered and modeled based on the Morison formula and applied to the mass center of each corresponding discrete rigid element. The mining ship is simplified and represented by a general kinematic point, whose heave motion induced by the ocean waves and the longitudinal and lateral towing motions are considered and applied. By integrating the single-body dynamic model of the miner and the multi-body discrete element dynamic model of the pipeline, and defining the kinematic equations of the mining ship, the integrated dynamic model of the total deep ocean mining system is formed. The longitudinal reciprocating motion operation modes of the total mining system, which combine the active straight-line and turning motions of the miner and the ship, and the passive towed motions of the pipeline, are proposed and simulated with the developed 3D dynamic model. Some critical simulation results are obtained and analyzed, such as the motion trajectories of key subsystems, the velocities of the buoyancy modules and the interaction forces between subsystems, which in a way can provide important theoretical basis and useful technical reference for the practical deep ocean mining system analysis, operation and control.展开更多
基金National Natural Science Foundation of China under Grant Nos.U2139208 and 52278516Key Laboratory of Earthquake Engineering and Engineering Vibration,China Earthquake Administration under Grant No.2024D15Key Laboratory of Soft Soil Characteristic and Engineering Environment,Tianjin Chengjian University under Grant No.2022SCEEKL003。
文摘This study presents an effective hybrid simulation approach for simulating broadband ground motion in complex near-fault locations.The approach utilizes a deterministic approach based on the spectral element method(SEM),which is used to simulate low-frequency ground motion(f<1 Hz)by incorporating an innovative efficient discontinuous Galerkin(DG)method for grid division to accurately model basin sedimentary layers at reduced costs.It also introduces a comprehensive hybrid source model for high-frequency random scattering and a nonlinear analysis module for basin sedimentary layers.Deterministic outcomes are combined with modified three-dimensional stochastic finite fault method(3D-EXSIM)simulations of high-frequency ground motion(f>1 Hz).A fourth-order Butterworth filter with zero phase shift is employed for time-domain filtering of low-and high-frequency time series at a crossover frequency of 1 Hz,merging the low and high-frequency ground motions into a broadband time series.Taking an Ms 6.8 Luding earthquake,as an example,this hybrid method was used for a rapid and efficient simulation analysis of broadband ground motion in the region.The accuracy and efficiency of this hybrid method were verified through comparisons with actually observed station data and empirical attenuation curves.Deterministic method simulation results revealed the effects of mountainous topography,basin effects,nonlinear effects within the basin’s sedimentary layers,and a coupling interaction between the basin and the mountains.The findings are consistent with similar studies,showing that near-fault sedimentary basins significantly focus and amplify strong ground motion,and the soil’s nonlinear behavior in the basin influences ground motion to varying extents at different distances from the fault.The mountainous topography impacts the basin’s response to ground motion,leading to barrier effects.This research provides a scientific foundation for seismic zoning,urban planning,and seismic design in nearfault mountain basin regions.
基金supported by the National Natural Science Foundation of China(52074341)。
文摘This study proposes a novel cyclone separator with a conical inner core to enhance particle classification efficiency in oil and gas wellhead-recovered liquids.Particle motion and force dynamics are analyzed to optimize key structural parameters,including inlet diameter(D_i),overflow pipe diameter(D_(e)),insertion depth(L_(e)),and bottom flow pipe diameter(D_(z)).Numerical simulations employ the Reynolds stress turbulence model,SIMPLEC algorithm,and discrete phase model to evaluate separation performance in a gas-liquid two-phase system.Results indicate that a smaller D_i improves fine particle separation but increases turbulence;an optimal range of D_i/D_(c)=0.35-0.4 is recommended.Larger D_(e) enhances the diversion ratio,aiding fine particle discharge(D_(e)/D_(c)=0.25-0.35).Increased Le facilitates fine particle overflow but induces vortices,whereas a smaller L_(e) stabilizes the bottom flow for larger particle separation(L_(e)/D_(c)=0.5-0.75).A reduced D_(z) enhances centrifugal force and separation efficiency but may cause turbulence;an optimal D_(z)/D_(c) of 0.6-0.65 is suggested for stability.These findings provide valuable design guidelines for improving cyclone separator performance in multiphase flow applications.
基金Supported by the Scientific and Technological Research Program of Chongqing Municipal Education Commission of China(Grant No.:KJQN202301105,KJQN202101550)Scientific Research Fund of Chongqing University of Technology(grant No.2021ZDZ015)National Nature Science Foundation of China(No.:52205052).
文摘This study investigates the effect of nacelle motions on the rotor performance and drivetrain dynamics of floating offshore wind turbines(FOWTs)through fully coupled aero-hydro-elastic-servo-mooring simulations.Using the National Renewable Energy Laboratory 5 MW monopile-supported offshore wind turbine and the OC4 DeepCwind semisubmersible wind turbine as case studies,the research addresses the complex dynamic responses resulting from the interaction among wind,waves,and turbine structures.Detailed multi-body dynamics models of wind turbines,including drivetrain components,are created within the SIMPACK framework.Meanwhile,the mooring system is modeled using a lumped-mass method.Various operational conditions are simulated through five wind-wave load cases.Results demonstrate that nacelle motions significantly influence rotor speed,thrust,torque,and power output,as well as the dynamic loads on drivetrain components.These findings highlight the need for advanced simulation techniques for the design and optimization of FOWTs to ensure reliable performance and longevity.
基金Funded by the National Key Research and Development Program(2022YFC3003502).
文摘This study addresses the pressing challenge of generating realistic strong ground motion data for simulating earthquakes,a crucial component in pre-earthquake risk assessments and post-earthquake disaster evaluations,particularly suited for regions with limited seismic data.Herein,we report a generative adversarial network(GAN)framework capable of simulating strong ground motions under various environmental conditions using only a small set of real earthquake records.The constructed GAN model generates ground motions based on continuous physical variables such as source distance,site conditions,and magnitude,effectively capturing the complexity and diversity of ground motions under different scenarios.This capability allows the proposed model to approximate real seismic data,making it applicable to a wide range of engineering purposes.Using the Shandong Pingyuan earthquake as an example,a specialized dataset was constructed based on regional real ground motion records.The response spectrum at target locations was obtained through inverse distance-weighted interpolation of actual response spectra,followed by continuous wavelet transform to derive the ground motion time histories at these locations.Through iterative parameter adjustments,the constructed GAN model learned the probability distribution of strong-motion data for this event.The trained model generated three-component ground-motion time histories with clear P-wave and S-wave characteristics,accurately reflecting the non-stationary nature of seismic records.Statistical comparisons between synthetic and real response spectra,waveform envelopes,and peak ground acceleration show a high degree of similarity,underscoring the effectiveness of the model in replicating both the statistical and physical characteristics of real ground motions.These findings validate the feasibility of GANs for generating realistic earthquake data in data-scarce regions,providing a reliable approach for enriching regional ground motion databases.Additionally,the results suggest that GAN-based networks are a powerful tool for building predictive models in seismic hazard analysis.
基金National Key R&D Program of China under Grant No.2022YFC3003601。
文摘The March 28,2025 Myanmar earthquake generated ground shaking that was perceptible throughout Myanmar and adjacent regions.This study simulated three-component ground motions across the affected region using an improved stochastic finite-fault method to systematically assess seismic impacts.Observed near-field recordings at MM.NGU station was used to determine the reliability of the theoretically derived stress drop as input for simulation.Far-field recordings constrained the frequency-dependent S-wave quality factors(Q(f)=283.305f^(0.588))for anelastic attenuation modeling.Comparisons of peak accelerations between simulation and empirical ground-motion models showed good agreement at moderate-to-large distances.However,lower near-fault simulations indicate a weaker-than-average source effect.Analysis of simulated instrumental seismic intensity revealed key patterns.Maximum intensity(Ⅹ)occurred in isolated patches within the ruptured fault projection,correlating with shallow high-slip areas.TheⅨ-intensity zone formed a north-south elongated band centered on fault projection.Significant asymmetry inⅧ-intensity distribution perpendicular to the fault strike was observed,with a wider western extension attributed to lower shear-wave velocities west of the fault.Supershear rupture behavior enhanced ground motions,expanding intensity ranges by~20%compared to sub-shear rupture.This study reveals the integrated effects of fault geometry,slip spatial distribution,rupture velocity,and site condition in governing ground motion patterns.
文摘Based on the character of the modular self-reconfigurable （MSR） robot, a novel homogeneous and lattice MSR robot, M-Cubes, was designed. Each module unit of the robot has 12 freedoms and is composed of six rotary joints and one cubic link. An attached/detached mechanism was designed on the rotary joints. A novel space transmitting system was placed on the inner portion of the cubic link. A motor separately transmitted torque to the six joints which were distributed equally on six surfaces of the cubic link. The example of a basic motion for the module was demonstrated. The result shows that the robot is concise and compact in structure, highly efficient in transmission, credible in connecting, and simple in controlling. At the same time, a simulator is developed to graphically design the system configuration, the reconfiguration process and the motion of cluster modules. The character of local action for the cellular automata （CA） is utilized. Each module is simplified as a cell. The transition rules of the CA are developed to combine with the genetic algorithm （GA） and applied to each module to accomplish distributed control. Simulation proves that the method is effective and feasible.
基金Graduate Innovation and Practice Foundation of Beijing University of Aeronautics amd Astronautics
文摘The previous study on modeling of the tilt rotor aircraft used to put a premium on the complicated aerodynamic computation, and the research on the motion equations is often constrained to frequently use the oversimplified 6-degree of freedom （DOF） rigid body equations. However, the transfiguration of aircraft during transition stage, is complicated due to the aerodynamic interference and the change of center of gravity （CG）. Moreover, the gyroscopic moment caused by tilting the high-speed revolving rotors seriously interferes with the aircraft attitude. The above-cited 6-DOF single rigid body equations do not take the inertia coupling effects into account during transition. For this sake, the article, reckoning the body, the nacelles and the rotors to be independent entities, establishes a realistic model in the form of multi-body motion equations. First, by applying Newton＇s laws and angular momentum theorem to a mass of elements of the aircraft, the multi-body motion equations in inertial flame as well as in body frame are obtained by integrating over all elements. As the equations are of implicit nonlinear differential type, the consistent initial value problem should be solved. Then, a numerical simulation of the differential equations is conducted by means of the Runge-Kutta-Felhberg integral algorithm. The modeling and the simulation algorithm are verified against the data of XV-15 as an example. The model can be used in the area of flight dynamics, flight control and flight safety of tilt rotor air- craft.
基金Supported by National Natural Science Foundation of China(Grant No.51275047)
文摘The design work of motional cable in products is vital due to the difficulty in estimating the potential issues in current researches.In this paper,a physics-based modeling and simulation method for the motional cable harness design is presented.The model,based on continuum mechanics,is established by analyzing the force of microelement in equilibrium.During the analysis procedure,three coordinate systems：inertial,Frenet and main-axis coordinate systems are used.By variable substitution and dimensionless processing,the equation set is discretized by differential quadrature method and subsequently becomes an overdetermined nonlinear equation set with boundary conditions solved by Levenberg-Marquardt method.With the profile of motional cable harness obtained from the integral of arithmetic solution,a motion simulation system based on＂path＂and＂profile＂as well as the experimental equipments is built.Using the same parameters as input for the simulation and the real cable harness correspondingly,the issue in designing,such as collision,can be easily found by the simulation system.This research obtains a better result which has no potential collisions by redesign,and the proposed method can be used as an accurate and efficient way in motional cable harness design work.
文摘In this study, a new mathematical model is developed composed of two parts, including harmonic and polynomial expressions for simulating the dominant velocity pulse of near fault ground motions. Based on a proposed velocity function, the corresponding expressions for the ground acceleration and displacement time histories are also derived. The proposed model is then fitted using some selected pulse-like near fault ground motions in the Next Generation Attenuation （NGA） project library. The new model is not only simple in form but also simulates the long-period portion of actual velocity near fault records with a high level of precision. It is shown that the proposed model-based elastic response spectra are compatible with the near fault records in the neighborhood of the prevailing frequency of the pulse. The results indicate that the proposed model adequately simulates the components of the time histories. Finally, the energy of the proposed pulse was compared with the energy of the actual record to confirm the compatibility.
基金National Key R&D Program of China under Grant No.2016YFC0701108the State Key Program of National Natural Science Foundation of China under Grant No.51738007
文摘This paper presents a novel approach to model and simulate the multi-support depth-varying seismic motions（MDSMs） within heterogeneous offshore and onshore sites.Based on 1 D wave propagation theory,the three-dimensional ground motion transfer functions on the surface or within an offshore or onshore site are derived by considering the effects of seawater and porous soils on the propagation of seismic P waves.Moreover,the depth-varying and spatial variation properties of seismic ground motions are considered in the ground motion simulation.Using the obtained transfer functions at any locations within a site,the offshore or onshore depth-varying seismic motions are stochastically simulated based on the spectral representation method（SRM）.The traditional approaches for simulating spatially varying ground motions are improved and extended to generate MDSMs within multiple offshore and onshore sites.The simulation results show that the PSD functions and coherency losses of the generated MDSMs are compatible with respective target values,which fully validates the effectiveness of the proposed simulation method.The synthesized MDSMs can provide strong support for the precise seismic response prediction and performance-based design of both offshore and onshore large-span engineering structures.
基金supported by the National Natural Science Foundation of China(Grant No.50979069)the Science and Technology Project of West China Traffic Construction(Grant No.200632800003-06)
文摘Corresponding to the sliding and the overturning failure,the elementary motion modes of caisson breakwater include the horizontal-rotational oscillation coupled motion,the horizontal sliding-rotational oscillation coupled motion,the horizontal vibrating-uplift rocking coupled motion,and the horizontal sliding-uplift rocking coupled motion.The motion mode of a caisson will transform from one to another depending on the wave forces and the motion behaviors of the caisson.The numerical models of four motion modes of caisson are developed,and the numerical simulation procedure for joint motion process of various modes of caisson breakwater under wave excitation is presented and tested by a physical model experiment.It is concluded that the simulation procedure is reliable and can be applied to the dynamic stability analysis of caisson breakwaters.
文摘The flying-wing underwater glider (UG), shaped as a blended wing body, is a new type of underwater vehicle and still requires further research. The shape layout and the configuration of the internal actuators of the flying-wing UG are different from those of "legacy gliders" which have revolving bodies, and these two factors strongly affect the dynamic performance of the vehicle. Considering these differences, we propose a new configuration of the internal actuators for the flying-wing UG and treat the flying-wing UG as a multi-body system when establishing its dynamic model. In this paper, a detailed dynamic model is presented using the Newton-Euler method for the flying-wing UG. Based on the full dynamic model, the effect of the internal actuators on the steady gliding motion of vehicle is studied theoretically, and the relationship between the state parameters of the steady gliding motion and the controlled variables is obtained by solving a set of equilibrium equations. Finally, the behaviors of two classical motion modes of the glider are analyzed based on the simulation. The simulation results demonstrate that the motion performance of the proposed flying-wing UG is satisfactory.
基金National Natural Science Foundation of China Under Grant No.90815020 and No.50639010
文摘A new model to simulate spatially correlated earthquake ground motions is developed. In the model, the main factors that characterize three distinct effects of spatial variability, namely, the incoherency effect, the wave-passage effect and the site-response effect, are taken into account, and corresponding terms/parameters are incorporated into the well known model of uniform ground motions. Some of these terms/parameters can be determined by the root operation, and others can be calculated directly. The proposed model is first verified theoretically, and examples of ground motion simulations are provided as a further illustration. It is proven that the ensemble expected value and the ensemble auto-/cross-spectral density functions of the simulated ground motions are identical to the target spectral density functions. The proposed model can also be used to simulate other correlated stochastic processes, such as wave and wind loads.
文摘The mass configuration of the buoyancy-driven underwater glider is decomposed and defined. The coupling between the glider body and its internal masses is addressed using the energy law. A glider motion model is established, and the corresponding simulation program is derived using MATLAB. The characteristics of the glider motion are explored using this program. The simula- tion results show that the basic characteristic of a buoyancy-driven underwater glider is the periodic alternation of downward and upward motions. The glider's spiral motion can be applied to missions in restricted regions. The glider's horizontal velocity, gliding depth and its motion radius in spiral motion can be changed to meet different application purposes by using different glider parameter designs. The simulation also shows that the model is appropriate and the program has strong simulation functions.
基金supported by National Natural Science Foundation of China (Grant No. 50805009)
文摘The motional payloads on stabilized platform must be linked by some cable harnesses with other immobile apparatus.During the operation of stabilized platform,these cable harnesses can create spring disturbance torque which is exerted on the stabilized platform and then reduce the stabilizing precision.None of current studies can deal with the spring disturbance torque problem.To analyze the spring disturbance toque,a dynamic thin rod model is presented for simulating the motional cable harness which is based on the Kirchhoff rod theorem and can consider the geometrically non-linear effects.The internal bending and torsion restoring torques are simulated and then a predictive analysis of the disturbance torque can be performed in motional cable routing design.This model is solved with differential quadrature method（DQM）.By using zeros of the Chebyshev polynomial as the grid points,the arc-coordinate is discretized to obtain a set of ordinary differential equations in time domain which is solved by implied method to obtain the profile and internal force of cable harness.The accuracy of this model is validated by comparing the simulation results and the experiment results（both the spring force and the deformed profile of the motional cable harness）.In the experiment,a special optical measuring instrument based on binocular vision is developed.The comparison of experimental and simulated results shows that the simulation model can represent the real motional cable harness well,and the spring disturbance force simulation results are precise enough for spring disturbance torque analysis.This study will be helpful to obtain an optimized motional cable harness layout design with small spring disturbance torque.
基金National Natural Science Foundation of China under Grant No.51308191 and Grant No.51278382the Fundamental Research Funds for the Central Universities of China under Grant No.2013B01514+1 种基金the Chang Jiang Scholars Program and the Innovative Research Team Program of the Ministry of Education of China under Grant No.IRT1125the 111 Project(No.B13024)
文摘The spectral representation method （SRM） is widely used to simulate spatially varying ground motions. This study focuses on the approximation approach to the SRM based on root decomposition, which can improve the efficiency of the simulation. The accuracy of the approximation approach may be affected by three factors： matrix for decomposition, distribution of frequency interpolation nodes and elements for interpolation. The influence of these factors on the accuracy of this approach is examined and the following conclusions are drawn. The SRM based on the root decomposition of the lagged coherency matrix exhibits greater accuracy than the SRM based on the root decomposition of the cross spectral matrix. The equal energy distribution of frequency interpolation nodes proposed in this study is more effective than the counter pith with an equal spacing. Elements for interpolation do not have much of an effect on the accuracy, so interpolation of the elements of the decomposed matrix is recommended because it is less complicated from a computational efficiency perspective.
基金financially supported by Lloyd’s Register Foundation(LRF),a UK-registered charity and sole shareholder of Lloyd’s Register Group Ltd.the Youth Innovation Fund of State Key Laboratory of Ocean Engineering(Grant No.GKZD010059-21)
文摘Simulating the coupled motions of multiple bodies in the time domain is a complex problem because of the strong hydrodynamic interactions and coupled effect of various mechanical connectors. In this study, we investigate the hydrodynamic responses of three barges moored side-by-side in a floatover operation in the frequency and time domains. In the frequency domain, the damping lid method is adopted to improve the overestimated hydrodynamic coefficients calculated from conventional potential flow theory. A time-domain computing program based on potential flow theory and impulse theory is compiled for analyses that consider multibody hydrodynamic interactions and mechanical effects from lines and fenders. Correspondingly, an experiment is carried out for comparison with the numerical results. All statistics, time series, and power density spectra from decay and irregular wave tests are in a fairly good agreement.
基金Supported by Major Projects of Science Research of Ministry of Education(311034)
文摘In order to analyze the spatial maneuverability of the remotely operated underwater vehicle(ROV),the 6-DOF motion mathematic model of the ROV was founded.Hydrodynamics were analyzed by using the Taylor series.The thrusters on the ROV were discussed.This paper considers three cases of motion simulation:vertical motion,rotational motion and Z-shape motion.A series of simulation experiments showed that the 6-DOF motion mathematic model was correct and reliable,and also fit with the scene simulation.
基金Supported by National Natural Science Foundation under Grant No.50879014
文摘Accurate modeling and simulation of autonomous underwater vehicle （AUV） is essential for autonomous control and maneuverability research. In this paper, a mini AUV- ＂MAUV-Ⅱ＂ was researched and the nonlinear mathematic model of the AUV in spatial motion was derived based on momentum theorem. The forces acting on AUV were resolved to several modules which were expressed in matrix form. Based on the motion model and combined with virtual reality technology, a motion simulation system was constructed. Considering the characteristic of ＂MAUV-Ⅱ ＂, the heading control and depth control were simulated by adopting S-surface control method. A long distance traveling simulation experiment based on target planning was also done. The simulation results show that the ＂MAUV-Ⅱ＂ has good spatial maneuverability, and verify the feasibility and reliability of control software.
基金supported by the National Natural Science Foundation of China(Grant No.51105386)the National Deep-Sea Technology Project of Development and Research(Grant No.DYXM-115-04-02-01)the Fundamental Research Funds for the Central Universities(Grant No.2011QNZT058)
文摘An integrated dynamic model of China＇s deep ocean mining system is developed and the fast simulation analysis of its longitudinal reciprocating motion operation processes is achieved. The seafloor tracked miner is built as a three-dimensional single-body model with six-degree-of-freedom. The track-terrain interaction is modeled by partitioning the track-terrain interface into a certain number of mesh elements with three mutually perpendicular forces, including the normal force, the longitudinal shear force and the lateral shear force, acting on the center point of each mesh element. The hydrodynamic force of the miner is considered and applied. By considering the operational safety and collection efficiency, two new mining paths for the miner on the seafloor are proposed, which can be simulated with the established single-body dynamic model of the miner. The pipeline subsystem is built as a three-dimensional multi-body discrete element model, which is divided into rigid elements linked by flexible connectors. The flexible connector without mass is represented by six spring-damper elements. The external hydrodynamic forces of the ocean current from the longitudinal and lateral directions are both considered and modeled based on the Morison formula and applied to the mass center of each corresponding discrete rigid element. The mining ship is simplified and represented by a general kinematic point, whose heave motion induced by the ocean waves and the longitudinal and lateral towing motions are considered and applied. By integrating the single-body dynamic model of the miner and the multi-body discrete element dynamic model of the pipeline, and defining the kinematic equations of the mining ship, the integrated dynamic model of the total deep ocean mining system is formed. The longitudinal reciprocating motion operation modes of the total mining system, which combine the active straight-line and turning motions of the miner and the ship, and the passive towed motions of the pipeline, are proposed and simulated with the developed 3D dynamic model. Some critical simulation results are obtained and analyzed, such as the motion trajectories of key subsystems, the velocities of the buoyancy modules and the interaction forces between subsystems, which in a way can provide important theoretical basis and useful technical reference for the practical deep ocean mining system analysis, operation and control.
