Compacted clays are widely used as barriers in municipal solid waste(MSW)landfills due to their low permeability,and the hydro-mechanical behaviour of such materials can be greatly affected by environmental conditions...Compacted clays are widely used as barriers in municipal solid waste(MSW)landfills due to their low permeability,and the hydro-mechanical behaviour of such materials can be greatly affected by environmental conditions.In this study,a series of wetting-drying(W-D)cycle tests and hydraulic conductivity tests were conducted on compacted red clay-bentonite mixtures.Various concentrations of NaCl solution were introduced during wetting to investigate the chemical effects.Scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP)tests were performed to analyze the evolution of soil microstructure.Results indicate that the compacted mixtures undergo cumulative shrinkage during W-D cycles,reaching an elastic state after three cycles.The hydraulic conductivity decreases as the bentonite content increases,becoming lower than 1×10^(-9)m/s when the bentonite content exceeds 10%,which satisfies the requirement for waste barriers.For a given bentonite content,the relationship between the logarithm of hydraulic conductivity and the void ratio can be well described by a linear regression equation.Additionally,the hydraulic conductivity initially increases and then decreases during the W-D cycles,peaking during the second wetting process.The presence of NaCl solution accelerates microstructural evolution and cumulative shrinkage,particularly in pure red clay.Therefore,adding an appropriate amount of bentonite mitigates the effect of NaCl solution on the volume change.Furthermore,the addition of bentonite exhibits a dual effect:the lubrication effect dominates in the mixtures with low bentonite content,while the filling effect prevails as volume change decreases due to the restriction of aggregates rearrangement when the bentonite content is high enough to fill the macropores.展开更多
The rock masses in the hydro-fluctuation zone of reservoir banks sustain wettingdrying cycles(WDC),thereby affecting the stability of the reservoir bank slope.In this paper,rock masses with argillaceous siltstone and ...The rock masses in the hydro-fluctuation zone of reservoir banks sustain wettingdrying cycles(WDC),thereby affecting the stability of the reservoir bank slope.In this paper,rock masses with argillaceous siltstone and silty mudstone interbedded in Badong Formation were taken as the research object to investigate the variation of strength parameters of soft and hard interbedded rock masses with WDC and dip angle through laboratory experiments and numerical experiments.Some attempts were made to reveal the mechanical properties deterioration mechanism of interbedded rock masses by quantitatively analyzing the contribution of strength parameters deterioration of hard rocks,soft rocks,and bedding planes to the strength parameters deterioration of rock masses.The results indicate that the logarithmic function could be used to describe the deterioration of each strength parameter of both argillaceous siltstone and silty mudstone and bedding plane with the number of WDC.The strength parameters of interbedded rock masses decrease as the number of WDC increases,with the largest decrease after the first cycle and then slowing down in the later cycles.The strength parameters initially decrease and then increase as the dip angles increase.The impact of deteriorated strength parameters of bedding planes and rocks on the deterioration of strength parameters of interbedded rock masses differs significantly with the dip angle,which can be divided into four typical ranges of different controlling factors.展开更多
Cracking affected by wetting-drying cycles is a major cause of shallow failure of soft rock slopes.Knowledge of rock tensile properties and cracking behaviors helps better assess the stability of soft rock slopes.This...Cracking affected by wetting-drying cycles is a major cause of shallow failure of soft rock slopes.Knowledge of rock tensile properties and cracking behaviors helps better assess the stability of soft rock slopes.This study aims to examine the cracking behaviors and tensile strength of silty mudstone under wetting-drying cycles.The wetting-drying cycle and Brazilian splitting tests were performed on silty mudstone considering various cycle number and amplitude.The cracking behaviors of wetting-drying cycles were analyzed by digital image correlation,three-dimensional(3D)scanning technology,and scanning electron microscopy.The results reveal a spiral-like pattern of crack ratio escalation in silty mudstone,with a higher crack ratio observed during drying than wetting.Tensile strength and fracture energy correlate negatively with cycle number or amplitude,with cycle number exerting a more pronounced effect.The variance of the maximum principal strain reflects stages of initial deformation,linear deformation,strain localization,and stable deformation.The formation of strain localization zones reveals the physical process of crack propagation.Crack tip opening displacement progresses through stages of slow growth,exponential growth,and linear growth,delineating the process from crack initiation to stable extension.Failure modes of silty mudstone primarily involve tensile and tensile-shear failure,influenced by the geometric parameters of cracks induced by wetting-drying cycles.Fracture surface roughness and fractal dimension increase with cycle number due to mineral dissolution,physical erosion,and nondirectional crack propagation.Hydration-swelling and dehydration-shrinkage of clay minerals,along with absorption-drying cracking,initiate and merge cracks,leading to degradation of the rock mechanical properties.The findings could provide insights for mitigating shallow cracking of soft rock slopes under wetting-drying cycles.展开更多
Raining and sun-shining processes in natural climate were simulated by water spraying and infrared lightshining alternately as wetting-drying cycles in accelerated durability test. The accelerating effects of the wet-...Raining and sun-shining processes in natural climate were simulated by water spraying and infrared lightshining alternately as wetting-drying cycles in accelerated durability test. The accelerating effects of the wet-ting-drying cycles and the variation of corrosion current density and corrosion potential of steel bar in concrete undersuch conditions were studied. The result shows that the main reason leading to accelerating corrosion of steel bar inconcrete is the wetting-drying cycles, which can cause the increase of corrosion potential difference between the an-ode and cathode of steel bar corrosion cell and the decrease of concrete resistance. Corrosion rate of the steel bar inconcrete under four typical conditions, including wetting-drying cycle, long time submerging in water, long time ex-posure to indoor and outdoor environment were measured and compared. The test results indicate that the corrosionrates under the four typical conditions are in the order of spraying and infrared light shining cycles, outdoor environ-ment, indoor environment, and submerging in water, respectively.展开更多
The degradation progress of recycled aggregate concrete(RAC) subjected to sulfate attack under wetting-drying cycles and flexural loading is studied. Three different stress ratios(0, 0.3 and 0.5) were applied in this ...The degradation progress of recycled aggregate concrete(RAC) subjected to sulfate attack under wetting-drying cycles and flexural loading is studied. Three different stress ratios(0, 0.3 and 0.5) were applied in this test. The variations of relative dynamic elastic modulus Erd and water-soluble SO2-4 contents in RAC were used to evaluate degradation progress. The changes in mineral products and microstructures of interior concrete were investigated by means of X-ray diffraction(XRD), the environmental scanning electron microscope(ESEM) and X-ray computed tomography(X-CT). The results indicate that flexural loading accelerates the degradation of RAC under sulfate attack and wetting-drying cycles by expediting the transmission of SO2-4 into interior concrete. Furthermore, the accelerated effect of flexural loading is more obvious with the increase of stress ratio, that is because higher stress ratios can accelerate the extension of microcracks and generate more channels for the transmission of SO2-4. Also, more expansive products(gypsum and ettringite) are generated by the reaction of Ca(OH)2 with SO2-4, which can further accelerate the degradation of RAC.展开更多
Alternating rainfall and evaporation in nature severely impact the shear strength of expansive soils.This study presents an instrument for simulating the effect of wetting–drying cycles on the strength of expansive s...Alternating rainfall and evaporation in nature severely impact the shear strength of expansive soils.This study presents an instrument for simulating the effect of wetting–drying cycles on the strength of expansive soils under different loads,and its testing error is verified.With this instrument,direct shear tests were performed on samples experiencing 0-6 cycles under vertical loads of 0 kPa,5 kPa,15 kPa,and 30 k Pa.The results found that this instrument provides a new method for evaluating the effects of wetting–drying cycles on soils,and this method represents actual engineering conditions more accurately than do preexisting methods.It accurately controls the water content within 1%while simulating the specified loads at different soil depths.Cohesion is significantly affected by wetting–drying cycles,while the friction angle is not as sensitive to these cycles.Decrease in shear strength can be attributed to the fissures in soils caused by wetting–drying cycles.The existence of vertical loads effectively restricts shrinkage fissuring and cohesion attenuation,consequently inhibiting the attenuation of shear strength.展开更多
The microbial-induced calcite precipitation(MICP)technique has been developed as a sustainable methodology for the improvement of the engineering characteristics of sandy soils.However,the efficiency of MICP-treated s...The microbial-induced calcite precipitation(MICP)technique has been developed as a sustainable methodology for the improvement of the engineering characteristics of sandy soils.However,the efficiency of MICP-treated sand has not been well established in the literature considering cyclic loading under undrained conditions.Furthermore,the efficacy of different bacterial strains in enhancing the cyclic properties of MICP-treated sand has not been sufficiently documented.Moreover,the effect of wetting-drying(WD)cycles on the cyclic characteristics of MICP-treated sand is not readily available,which may contribute to the limited adoption of MICP treatment in field applications.In this study,strain-controlled consolidated undrained(CU)cyclic triaxial testing was conducted to evaluate the effects of MICP treatment on standard Ennore sand from India with two bacterial strains:Sporosarcina pasteurii and Bacillus subtilis.The treatment durations of 7 d and 14 d were considered,with an interval of 12 h between treatments.The cyclic characteristics,such as the shear modulus and damping ratio,of the MICP-treated sand with the different bacterial strains have been estimated and compared.Furthermore,the effect of WD cycles on the cyclic characteristics of MICP-treated sand has been evaluated considering 5–15 cycles and aging of samples up to three months.The findings of this study may be helpful in assessing the cyclic characteristics of MICP-treated sand,considering the influence of different bacterial strains,treatment duration,and WD cycles.展开更多
Saline soil is widely distributed in the marine sediments along the coast of the world and the arid-semi-arid areas of the Middle East and Iraq,and calcium sulfate erosion has become one of the important factors affec...Saline soil is widely distributed in the marine sediments along the coast of the world and the arid-semi-arid areas of the Middle East and Iraq,and calcium sulfate erosion has become one of the important factors affecting the durability of concrete in this area.In order to clarify the mechanism of sulfate ion damage to concrete,this paper mainly takes saline soil with high sulfate content in coastal area as well as arid-semi-arid area as the research object,and uses indoor geotechnical test,field test and numerical simulation to study the influence of different dry-wet cycle times on the unconfined compressive strength of concrete test blocks,and puts forward the relationship between the erosion arrival depth and time of sulfate ion in concrete,so as to predict the long-term erosion depth by using the erosion depth of sulfate ion in concrete in short time.The results show that the shorter the erosion time when the erosion reaches a certain depth,and the larger the erosion reaches when the erosion time is the same,the faster the erosion reaches the depth with the increase of erosion time.Compared with rectangular section concrete,circular section concrete penetrates faster.The results of this study can provide a reference for the durability design of concrete in saline soil sites containing sulfate.展开更多
Soil aggregate is the basic structural unit of soil,which is the foundation for supporting ecosystem functions,while its composition and stability is significantly affected by the external environment.This study was c...Soil aggregate is the basic structural unit of soil,which is the foundation for supporting ecosystem functions,while its composition and stability is significantly affected by the external environment.This study was conducted to explore the effect of external environment(wetting-drying cycles and acidic conditions)on the soil aggregate distribution and stability and identify the key soil physicochemical factors that affect the soil aggregate stability.The yellow‒brown soil from the Three Gorges Reservoir area(TGRA)was used,and 8 wetting-drying conditions(0,1,2,3,4,5,10 and 15 cycles)were simulated under 4 acidic conditions(pH=3,4,5 and 7).The particle size distribution and soil aggregate stability were determined by wet sieving method,the contribution of environmental factors(acid condition,wetting-drying cycle and their combined action)to the soil aggregate stability was clarified and the key soil physicochemical factors that affect the soil aggregate stability under wetting-drying cycles and acidic conditions were determined by using the Pearson’s correlation analysis,Partial least squares path modeling(PLS‒PM)and multiple linear regression analysis.The results indicate that wetting-drying cycles and acidic conditions have significant effects on the stability of soil aggregates,the soil aggregate stability gradually decreases with increasing number of wetting-drying cycles and it obviously decreases with the increase of acidity.Moreover,the combination of wetting-drying cycles and acidic conditions aggravate the reduction in the soil aggregate stability.The wetting-drying cycles,acidic conditions and their combined effect imposes significant impact on the soil aggregate stability,and the wetting-drying cycles exert the greatest influence.The soil aggregate stability is significantly correlated with the pH,Ca^(2+),Mg^(2+),maximum disintegration index(MDI)and soil bulk density(SBD).The PLS‒PM and multiple linear regression analysis further reveal that the soil aggregate stability is primarily influenced by SBD,Ca^(2+),and MDI.These results offer a scientific basis for understanding the soil aggregate breakdown mechanism and are helpful for clarifying the coupled effect of wetting-drying cycles and acid rain on terrestrial ecosystems in the TGRA.展开更多
The understanding of the weakening mechanism of tensile strength of rock subjected to cyclic wetting-drying is critical for rock engineering.Tensile strength tests were conducted on a total of 35 sandstone specimens w...The understanding of the weakening mechanism of tensile strength of rock subjected to cyclic wetting-drying is critical for rock engineering.Tensile strength tests were conducted on a total of 35 sandstone specimens with different wetting-drying cycles.The crack propagation process and acoustic emission characteristics of the tested samples were obtained through a high-speed camera and acoustic emission system.The results indicate that the tensile strength is observably reduced after cyclic wetting-drying,and the extent of the reduction is not only related to the number of wettingdrying cycle,but also closely related to the clay mineral content of the sample.In addition,as the cycles of wetting-drying increase,the effect of each single cycle on tensile strength get reduced until it becomes constant.Moreover,the crack initiation and penetration time is prolonged as the number of wetting-drying cycle increases,which indicates that cyclic wetting-drying weakens the rock stiffness and enhances the ductility of sandstone.Meanwhile,the acoustic emission characteristics of the tested samples further confirmed the ductile behaviour of the sandstone samples with increasing wetting-drying cycle.Furthermore,through the analysis of the microstructure and mineral composition of the samples with different wetting-drying cycles,it is concluded that the main weakening mechanisms of sandstones containing clay minerals are frictional reduction,chemical and corrosive deterioration.展开更多
The effects of desiccation cracking in clay soils on geotechnical constructions are substantial.This study investigates the viability of utilizing Enzyme-induced calcite precipitation(EICP),a bio inspired approach,as ...The effects of desiccation cracking in clay soils on geotechnical constructions are substantial.This study investigates the viability of utilizing Enzyme-induced calcite precipitation(EICP),a bio inspired approach,as a potential solution for addressing desiccation cracking in fine-grain soils.For the EICP technique,crude soybean extract is employed for the purpose of urea hydrolysis.Multiple fluid samples,including a control sample,a cementation solution containing 1 M urea,0.675 M CaCl_(2),and 4 g/L milk,along with various concentrations of enzyme solutions(3-80 g/L),were tested for the study.To evaluate the surface cracking patterns,the method involved constant monitoring and photo recording using a high-resolution camera aided by image processing software.The results showed that fine-grain soils improved from increased calcite precipitation and decreased desiccation cracking intensity when the EICP method was used.Cementation and enzyme solution with low concentrations(3 g/L and 10 g/L)had similar effects on crack remediation,suggesting a modest influence.In contrast to the sample treated with water,the crack network remained unaltered in this case.CaCO3 precipitation within the void area kept the crack network in place even as the void thickness decreased at increasing enzyme concentrations(30 g/L,50 g/L,and 80 g/L).Wetting and drying cycles were found to decrease the crack ratio,crack width,and crack length in the EICP-treated sample,particularly under higher concentrations of urease enzyme.Lower enzyme concentrations of 3 g/L and 10 g/L have minimal impact on crack remediation but effectively inhibit new crack formation.Furthermore,higher enzyme concentrations result in calcium carbonate precipitates,forming a soil crust and increasing surface roughness.The study aims to enhance understanding of the EICP methodology and to provide novel perspectives on potential uses for soil enhancement.展开更多
Cognitive cycle is a basic procedure of mental activities in cognitive level. Human cognition consists of cascading cycles of recurring brain events. This paper presents a cognitive cycle for the mind model CAM (Consc...Cognitive cycle is a basic procedure of mental activities in cognitive level. Human cognition consists of cascading cycles of recurring brain events. This paper presents a cognitive cycle for the mind model CAM (Consciousness And Memory). Each cognitive cycle perceives the current situation, through motivation phase with reference to ongoing goals, and then composes internal or external action streams to reach the goals in response. We use dynamic description logic which is an extended description logic with action to formalize descriptions and algorithms of cognitive cycle. Two important algorithms, including hierarchical goal and action composition, is proposed in the paper.展开更多
Basic concepts and notions of ontological description of domains are implemented in the conceptual model being understandable to ordinary users of this domain. Ontological approach is used for the presentation of soft...Basic concepts and notions of ontological description of domains are implemented in the conceptual model being understandable to ordinary users of this domain. Ontological approach is used for the presentation of software engineering domain—Life Cycle (LC) ISO/IEC 12207 with the aim to automate LC processes and to generate different variants of LC for development systems. And the second aim of Conceptual Model must teach the student to standard process LC, which includes general, organizational and supported processes. These processes are presented in graphical terms of DSL, which are transformed to XML for processing systems in the modern environment (IBM, VS.Net, JAVA and so on). The testing process is given in ontology terms of Protégé systems, and semantics of tasks of this process is implemented in Ruby. Domain ontology LC is displayed by the several students of MIPT Russia and Kiev National University as laboratory practicum course “Software Engineering”.展开更多
The paper presents the change in grain-size composition of lignite under cyclic freezing-thawing (FTC) and wetting-drying (WDC). The article shows that in the spring and autumn periods the lignites can be subjected to...The paper presents the change in grain-size composition of lignite under cyclic freezing-thawing (FTC) and wetting-drying (WDC). The article shows that in the spring and autumn periods the lignites can be subjected to repeated freezing-thawing and wetting-drying, which determines the possibility of changing their grain-size composition and structure. Experimental studies in laboratory conditions on the influence of cyclic freezing-thawing (FTC) and wetting-drying (WDC) on the quality indicators of lignites have been carried out, their granulometric (fractional) composition has been studied. Freezing-thawing cycle conditions are as follows (FTC): minimum exposure temperature: -20°C;maximum: +5°C;relative humidity: 30%;number of processing cycles: 3. Wetting-drying cycles are as follows (WDC): drying temperatures are +20, +40, +60, +80°C, drying time 90 minutes, the coals are further subjected to rain (soaking) for a period of water saturation to humidity of 30% - 40% and dry again. The number of wetting-drying cycles is 3 times. The tests have revealed the destructive effects of FTC and WDC on the samples of lower metamorphic grade coal, and the cycles of wet-dry lead to the much higher yield of fine sizes (-6+0;-13+0 mm) than the cycles of freeze-thaw. Furthermore, it is found that the increase in the yield of fines depends on the heating temperature: coal disintegration proceeds more intensively at a higher temperature of drying.展开更多
Bio-carbonation of reactive MgO has been regarded as a promising and eco-friendly method for construction and demolition waste(CDW)cementation in various geotechnical engineering applications.However,the beneficial ef...Bio-carbonation of reactive MgO has been regarded as a promising and eco-friendly method for construction and demolition waste(CDW)cementation in various geotechnical engineering applications.However,the beneficial effect of bio-carbonation of reactive MgO cemented CDW(BCM-samples)can be altered when exposed to wetting-drying cycles induced by extreme climate changes or groundwater fluctuations.To better understand the durability of BCM-samples and their underlying deterioration mechanisms,a series of BCM-samples was prepared to investigate their physical-mechanical performance and microstructure evolution subjected to the wetting-drying cycles.The results indicated that the wetting-drying cycles can deteriorate the BCM-samples,and their physical-mechanical behaviors change quickly at the cycle beginning and then smoothly after 2 cycles.With the increase in cycling,the apparent deterioration with efflorescence and microcrack development can be observed.The mass loss and water absorption rates increased while the dry density,compressional wave velocity,and unconfined compression strength decreased.Urea pre-hydrolysis treatment can significantly improve the durability of BCM-samples,as the more hydrated magnesia carbonates(HMCs)enhance the cementing effects.After 10 cycles,the UCS of pre-hydrolyzed samples decreased 25.4%to 4.45 MPa,while that of ordinary samples decreased 50.7%to 1.20 MPa.The deterioration of BCM-samples caused by wetting-drying cycles can be attributed to two factors.One of the main factors is the structural integrity changes caused by the rapid loss of soluble material at the initial cycling stages.Another factor is the decrease in cementation induced by the loss of brucite and HMCs at the following cycle stages.展开更多
In order to build the model of the drum level wave action and sloshing, based on the method of modularization modeling, the hydrodynamic model of drum level wave action and sloshing was developed, and dynamic simulati...In order to build the model of the drum level wave action and sloshing, based on the method of modularization modeling, the hydrodynamic model of drum level wave action and sloshing was developed, and dynamic simulation researches were carried out based on the model. The results indicate that both drum level and drum length have functional relations with period of drum level wave action and sloshing. When the drum level decreases or drum length increases, the period of drum level wave action and sloshing increases, density of liquid and number of sub-module division have little influence on the period of drum level wave action and sloshing. The model was validated by the analytical solution theory of liquid’s wave action and sloshing in cuboid container, and the 3D graphics of drum level wave action and sloshing was also obtained. The model can dynamically reflect the rules of wave action and sloshing of water in the container exactly.展开更多
Loess landslides are major hazards in the Chinese Loess Plateau(CLP).The loess in this region is frequently subjected to repeated wetting–drying(W-D)cycles due to climatic factors,which significantly increases the li...Loess landslides are major hazards in the Chinese Loess Plateau(CLP).The loess in this region is frequently subjected to repeated wetting–drying(W-D)cycles due to climatic factors,which significantly increases the likelihood of landslides.Therefore,investigating the shear behavior and microstructural evolution of loess under climate-induced W-D cycles is crucial to understanding the mechanisms of loess landslides.In this study,Malan loess is analyzed using unsaturated triaxial tests,resistivity tests,scanning electron microscopy,and mercury intrusion porosimetry.The test results show that shear strength decreases with increased W-D cycles,and the degradation effect is more pronounced under lower confining pressure.The variations in conductive pathways indicate that electrical resistivity can effectively reflect the structural damage of loess during W-D cycles,which is associated with increased direct point contacts and spaced pores.Aggregation of clay particles and growth of cracks during the W-D cycles can further destabilize the loess microstructure.As the confining pressure increases,crushed particles rearrange and convert spaced pores into intergranular pores.The number and peak intensity of dominant spaced pores decrease,resulting in a more stable structure.This study clarifies the mechanisms of loess landslides under W-D cycles and provides theoretical support for landslide prevention and control in the CLP.展开更多
基金the National Natural Science Foundation of China(Grant Nos.42372333 and 42072318)the China Scholarship Council(CSC)(Grant No.202306370029)。
文摘Compacted clays are widely used as barriers in municipal solid waste(MSW)landfills due to their low permeability,and the hydro-mechanical behaviour of such materials can be greatly affected by environmental conditions.In this study,a series of wetting-drying(W-D)cycle tests and hydraulic conductivity tests were conducted on compacted red clay-bentonite mixtures.Various concentrations of NaCl solution were introduced during wetting to investigate the chemical effects.Scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP)tests were performed to analyze the evolution of soil microstructure.Results indicate that the compacted mixtures undergo cumulative shrinkage during W-D cycles,reaching an elastic state after three cycles.The hydraulic conductivity decreases as the bentonite content increases,becoming lower than 1×10^(-9)m/s when the bentonite content exceeds 10%,which satisfies the requirement for waste barriers.For a given bentonite content,the relationship between the logarithm of hydraulic conductivity and the void ratio can be well described by a linear regression equation.Additionally,the hydraulic conductivity initially increases and then decreases during the W-D cycles,peaking during the second wetting process.The presence of NaCl solution accelerates microstructural evolution and cumulative shrinkage,particularly in pure red clay.Therefore,adding an appropriate amount of bentonite mitigates the effect of NaCl solution on the volume change.Furthermore,the addition of bentonite exhibits a dual effect:the lubrication effect dominates in the mixtures with low bentonite content,while the filling effect prevails as volume change decreases due to the restriction of aggregates rearrangement when the bentonite content is high enough to fill the macropores.
基金supported by the Chinese National Key R&D Program(No.2022YFC3080200)the Chinese National Natural Science Foundation(No.42090054)。
文摘The rock masses in the hydro-fluctuation zone of reservoir banks sustain wettingdrying cycles(WDC),thereby affecting the stability of the reservoir bank slope.In this paper,rock masses with argillaceous siltstone and silty mudstone interbedded in Badong Formation were taken as the research object to investigate the variation of strength parameters of soft and hard interbedded rock masses with WDC and dip angle through laboratory experiments and numerical experiments.Some attempts were made to reveal the mechanical properties deterioration mechanism of interbedded rock masses by quantitatively analyzing the contribution of strength parameters deterioration of hard rocks,soft rocks,and bedding planes to the strength parameters deterioration of rock masses.The results indicate that the logarithmic function could be used to describe the deterioration of each strength parameter of both argillaceous siltstone and silty mudstone and bedding plane with the number of WDC.The strength parameters of interbedded rock masses decrease as the number of WDC increases,with the largest decrease after the first cycle and then slowing down in the later cycles.The strength parameters initially decrease and then increase as the dip angles increase.The impact of deteriorated strength parameters of bedding planes and rocks on the deterioration of strength parameters of interbedded rock masses differs significantly with the dip angle,which can be divided into four typical ranges of different controlling factors.
基金the financial support by the National Natural Science Foundation of China(Grant No.52108397)“Xiaohe”Science and Technology Talent Special Project(Grant No.2024 TJ-X06)Water Resources Science and Technology Project of Hunan Province(Grant No.XSKJ2023059-41).
文摘Cracking affected by wetting-drying cycles is a major cause of shallow failure of soft rock slopes.Knowledge of rock tensile properties and cracking behaviors helps better assess the stability of soft rock slopes.This study aims to examine the cracking behaviors and tensile strength of silty mudstone under wetting-drying cycles.The wetting-drying cycle and Brazilian splitting tests were performed on silty mudstone considering various cycle number and amplitude.The cracking behaviors of wetting-drying cycles were analyzed by digital image correlation,three-dimensional(3D)scanning technology,and scanning electron microscopy.The results reveal a spiral-like pattern of crack ratio escalation in silty mudstone,with a higher crack ratio observed during drying than wetting.Tensile strength and fracture energy correlate negatively with cycle number or amplitude,with cycle number exerting a more pronounced effect.The variance of the maximum principal strain reflects stages of initial deformation,linear deformation,strain localization,and stable deformation.The formation of strain localization zones reveals the physical process of crack propagation.Crack tip opening displacement progresses through stages of slow growth,exponential growth,and linear growth,delineating the process from crack initiation to stable extension.Failure modes of silty mudstone primarily involve tensile and tensile-shear failure,influenced by the geometric parameters of cracks induced by wetting-drying cycles.Fracture surface roughness and fractal dimension increase with cycle number due to mineral dissolution,physical erosion,and nondirectional crack propagation.Hydration-swelling and dehydration-shrinkage of clay minerals,along with absorption-drying cracking,initiate and merge cracks,leading to degradation of the rock mechanical properties.The findings could provide insights for mitigating shallow cracking of soft rock slopes under wetting-drying cycles.
基金Project(50078054) supported by National Natural Science Foundation of China and Youth Scientific Research Fund of CUMT
文摘Raining and sun-shining processes in natural climate were simulated by water spraying and infrared lightshining alternately as wetting-drying cycles in accelerated durability test. The accelerating effects of the wet-ting-drying cycles and the variation of corrosion current density and corrosion potential of steel bar in concrete undersuch conditions were studied. The result shows that the main reason leading to accelerating corrosion of steel bar inconcrete is the wetting-drying cycles, which can cause the increase of corrosion potential difference between the an-ode and cathode of steel bar corrosion cell and the decrease of concrete resistance. Corrosion rate of the steel bar inconcrete under four typical conditions, including wetting-drying cycle, long time submerging in water, long time ex-posure to indoor and outdoor environment were measured and compared. The test results indicate that the corrosionrates under the four typical conditions are in the order of spraying and infrared light shining cycles, outdoor environ-ment, indoor environment, and submerging in water, respectively.
基金The National Natural Science Foundation of China(No.51578141)the Major State Basic Research Development Program of China(No.2015CB655102)China-Japanese Research Cooperative Program-Ministry of Science and Technology in China(No.2016YFE0118200)
文摘The degradation progress of recycled aggregate concrete(RAC) subjected to sulfate attack under wetting-drying cycles and flexural loading is studied. Three different stress ratios(0, 0.3 and 0.5) were applied in this test. The variations of relative dynamic elastic modulus Erd and water-soluble SO2-4 contents in RAC were used to evaluate degradation progress. The changes in mineral products and microstructures of interior concrete were investigated by means of X-ray diffraction(XRD), the environmental scanning electron microscope(ESEM) and X-ray computed tomography(X-CT). The results indicate that flexural loading accelerates the degradation of RAC under sulfate attack and wetting-drying cycles by expediting the transmission of SO2-4 into interior concrete. Furthermore, the accelerated effect of flexural loading is more obvious with the increase of stress ratio, that is because higher stress ratios can accelerate the extension of microcracks and generate more channels for the transmission of SO2-4. Also, more expansive products(gypsum and ettringite) are generated by the reaction of Ca(OH)2 with SO2-4, which can further accelerate the degradation of RAC.
基金provided by the National Natural Science Foundation of China(Grant No.51169005)
文摘Alternating rainfall and evaporation in nature severely impact the shear strength of expansive soils.This study presents an instrument for simulating the effect of wetting–drying cycles on the strength of expansive soils under different loads,and its testing error is verified.With this instrument,direct shear tests were performed on samples experiencing 0-6 cycles under vertical loads of 0 kPa,5 kPa,15 kPa,and 30 k Pa.The results found that this instrument provides a new method for evaluating the effects of wetting–drying cycles on soils,and this method represents actual engineering conditions more accurately than do preexisting methods.It accurately controls the water content within 1%while simulating the specified loads at different soil depths.Cohesion is significantly affected by wetting–drying cycles,while the friction angle is not as sensitive to these cycles.Decrease in shear strength can be attributed to the fissures in soils caused by wetting–drying cycles.The existence of vertical loads effectively restricts shrinkage fissuring and cohesion attenuation,consequently inhibiting the attenuation of shear strength.
基金the financial support provided by the Ministry of Education(MoE),Government of IndiaThe second author acknowledges Coal India Limited for providing financial assistance for the research(Project No.CIL/R&D/01/73/2021).
文摘The microbial-induced calcite precipitation(MICP)technique has been developed as a sustainable methodology for the improvement of the engineering characteristics of sandy soils.However,the efficiency of MICP-treated sand has not been well established in the literature considering cyclic loading under undrained conditions.Furthermore,the efficacy of different bacterial strains in enhancing the cyclic properties of MICP-treated sand has not been sufficiently documented.Moreover,the effect of wetting-drying(WD)cycles on the cyclic characteristics of MICP-treated sand is not readily available,which may contribute to the limited adoption of MICP treatment in field applications.In this study,strain-controlled consolidated undrained(CU)cyclic triaxial testing was conducted to evaluate the effects of MICP treatment on standard Ennore sand from India with two bacterial strains:Sporosarcina pasteurii and Bacillus subtilis.The treatment durations of 7 d and 14 d were considered,with an interval of 12 h between treatments.The cyclic characteristics,such as the shear modulus and damping ratio,of the MICP-treated sand with the different bacterial strains have been estimated and compared.Furthermore,the effect of WD cycles on the cyclic characteristics of MICP-treated sand has been evaluated considering 5–15 cycles and aging of samples up to three months.The findings of this study may be helpful in assessing the cyclic characteristics of MICP-treated sand,considering the influence of different bacterial strains,treatment duration,and WD cycles.
基金supported by the Fundamental Research Funds for the Central Universities(No.201962011)the Laboratory for Marine Geology,Qingdao National Labo-ratory for Marine Science and Technology(No.MGQN LM-KF201804)the National Natural Science Foundation of China(No.41672272).
文摘Saline soil is widely distributed in the marine sediments along the coast of the world and the arid-semi-arid areas of the Middle East and Iraq,and calcium sulfate erosion has become one of the important factors affecting the durability of concrete in this area.In order to clarify the mechanism of sulfate ion damage to concrete,this paper mainly takes saline soil with high sulfate content in coastal area as well as arid-semi-arid area as the research object,and uses indoor geotechnical test,field test and numerical simulation to study the influence of different dry-wet cycle times on the unconfined compressive strength of concrete test blocks,and puts forward the relationship between the erosion arrival depth and time of sulfate ion in concrete,so as to predict the long-term erosion depth by using the erosion depth of sulfate ion in concrete in short time.The results show that the shorter the erosion time when the erosion reaches a certain depth,and the larger the erosion reaches when the erosion time is the same,the faster the erosion reaches the depth with the increase of erosion time.Compared with rectangular section concrete,circular section concrete penetrates faster.The results of this study can provide a reference for the durability design of concrete in saline soil sites containing sulfate.
基金co-funded by the National Natural Science Foundation of China(U204020742277323)+2 种基金the 111 Project of Hubei Province(2021EJD026)the open fund of Key Laboratory of Geological Hazards on Three Gorges Reservoir Area(China Three Gorges University)Ministry of Education(2022KDZ24).
文摘Soil aggregate is the basic structural unit of soil,which is the foundation for supporting ecosystem functions,while its composition and stability is significantly affected by the external environment.This study was conducted to explore the effect of external environment(wetting-drying cycles and acidic conditions)on the soil aggregate distribution and stability and identify the key soil physicochemical factors that affect the soil aggregate stability.The yellow‒brown soil from the Three Gorges Reservoir area(TGRA)was used,and 8 wetting-drying conditions(0,1,2,3,4,5,10 and 15 cycles)were simulated under 4 acidic conditions(pH=3,4,5 and 7).The particle size distribution and soil aggregate stability were determined by wet sieving method,the contribution of environmental factors(acid condition,wetting-drying cycle and their combined action)to the soil aggregate stability was clarified and the key soil physicochemical factors that affect the soil aggregate stability under wetting-drying cycles and acidic conditions were determined by using the Pearson’s correlation analysis,Partial least squares path modeling(PLS‒PM)and multiple linear regression analysis.The results indicate that wetting-drying cycles and acidic conditions have significant effects on the stability of soil aggregates,the soil aggregate stability gradually decreases with increasing number of wetting-drying cycles and it obviously decreases with the increase of acidity.Moreover,the combination of wetting-drying cycles and acidic conditions aggravate the reduction in the soil aggregate stability.The wetting-drying cycles,acidic conditions and their combined effect imposes significant impact on the soil aggregate stability,and the wetting-drying cycles exert the greatest influence.The soil aggregate stability is significantly correlated with the pH,Ca^(2+),Mg^(2+),maximum disintegration index(MDI)and soil bulk density(SBD).The PLS‒PM and multiple linear regression analysis further reveal that the soil aggregate stability is primarily influenced by SBD,Ca^(2+),and MDI.These results offer a scientific basis for understanding the soil aggregate breakdown mechanism and are helpful for clarifying the coupled effect of wetting-drying cycles and acid rain on terrestrial ecosystems in the TGRA.
基金Funding for this work was provided by Natural Science Foundation of China(41941018,41402273),the Yue Qi Scholar Program of China University of Mining and Technology.The authors wish to thank the reviewers for careful and constructive suggestions.
文摘The understanding of the weakening mechanism of tensile strength of rock subjected to cyclic wetting-drying is critical for rock engineering.Tensile strength tests were conducted on a total of 35 sandstone specimens with different wetting-drying cycles.The crack propagation process and acoustic emission characteristics of the tested samples were obtained through a high-speed camera and acoustic emission system.The results indicate that the tensile strength is observably reduced after cyclic wetting-drying,and the extent of the reduction is not only related to the number of wettingdrying cycle,but also closely related to the clay mineral content of the sample.In addition,as the cycles of wetting-drying increase,the effect of each single cycle on tensile strength get reduced until it becomes constant.Moreover,the crack initiation and penetration time is prolonged as the number of wetting-drying cycle increases,which indicates that cyclic wetting-drying weakens the rock stiffness and enhances the ductility of sandstone.Meanwhile,the acoustic emission characteristics of the tested samples further confirmed the ductile behaviour of the sandstone samples with increasing wetting-drying cycle.Furthermore,through the analysis of the microstructure and mineral composition of the samples with different wetting-drying cycles,it is concluded that the main weakening mechanisms of sandstones containing clay minerals are frictional reduction,chemical and corrosive deterioration.
基金supported by a subaward from Rutgers University,Center for Advanced Infrastructure&Transportation,under Grant no.69A3551847102 from the U.S.Department of Transportation,Office of the Assistant Secretary for Research and Technology(OST-R).
文摘The effects of desiccation cracking in clay soils on geotechnical constructions are substantial.This study investigates the viability of utilizing Enzyme-induced calcite precipitation(EICP),a bio inspired approach,as a potential solution for addressing desiccation cracking in fine-grain soils.For the EICP technique,crude soybean extract is employed for the purpose of urea hydrolysis.Multiple fluid samples,including a control sample,a cementation solution containing 1 M urea,0.675 M CaCl_(2),and 4 g/L milk,along with various concentrations of enzyme solutions(3-80 g/L),were tested for the study.To evaluate the surface cracking patterns,the method involved constant monitoring and photo recording using a high-resolution camera aided by image processing software.The results showed that fine-grain soils improved from increased calcite precipitation and decreased desiccation cracking intensity when the EICP method was used.Cementation and enzyme solution with low concentrations(3 g/L and 10 g/L)had similar effects on crack remediation,suggesting a modest influence.In contrast to the sample treated with water,the crack network remained unaltered in this case.CaCO3 precipitation within the void area kept the crack network in place even as the void thickness decreased at increasing enzyme concentrations(30 g/L,50 g/L,and 80 g/L).Wetting and drying cycles were found to decrease the crack ratio,crack width,and crack length in the EICP-treated sample,particularly under higher concentrations of urease enzyme.Lower enzyme concentrations of 3 g/L and 10 g/L have minimal impact on crack remediation but effectively inhibit new crack formation.Furthermore,higher enzyme concentrations result in calcium carbonate precipitates,forming a soil crust and increasing surface roughness.The study aims to enhance understanding of the EICP methodology and to provide novel perspectives on potential uses for soil enhancement.
文摘Cognitive cycle is a basic procedure of mental activities in cognitive level. Human cognition consists of cascading cycles of recurring brain events. This paper presents a cognitive cycle for the mind model CAM (Consciousness And Memory). Each cognitive cycle perceives the current situation, through motivation phase with reference to ongoing goals, and then composes internal or external action streams to reach the goals in response. We use dynamic description logic which is an extended description logic with action to formalize descriptions and algorithms of cognitive cycle. Two important algorithms, including hierarchical goal and action composition, is proposed in the paper.
文摘Basic concepts and notions of ontological description of domains are implemented in the conceptual model being understandable to ordinary users of this domain. Ontological approach is used for the presentation of software engineering domain—Life Cycle (LC) ISO/IEC 12207 with the aim to automate LC processes and to generate different variants of LC for development systems. And the second aim of Conceptual Model must teach the student to standard process LC, which includes general, organizational and supported processes. These processes are presented in graphical terms of DSL, which are transformed to XML for processing systems in the modern environment (IBM, VS.Net, JAVA and so on). The testing process is given in ontology terms of Protégé systems, and semantics of tasks of this process is implemented in Ruby. Domain ontology LC is displayed by the several students of MIPT Russia and Kiev National University as laboratory practicum course “Software Engineering”.
文摘The paper presents the change in grain-size composition of lignite under cyclic freezing-thawing (FTC) and wetting-drying (WDC). The article shows that in the spring and autumn periods the lignites can be subjected to repeated freezing-thawing and wetting-drying, which determines the possibility of changing their grain-size composition and structure. Experimental studies in laboratory conditions on the influence of cyclic freezing-thawing (FTC) and wetting-drying (WDC) on the quality indicators of lignites have been carried out, their granulometric (fractional) composition has been studied. Freezing-thawing cycle conditions are as follows (FTC): minimum exposure temperature: -20°C;maximum: +5°C;relative humidity: 30%;number of processing cycles: 3. Wetting-drying cycles are as follows (WDC): drying temperatures are +20, +40, +60, +80°C, drying time 90 minutes, the coals are further subjected to rain (soaking) for a period of water saturation to humidity of 30% - 40% and dry again. The number of wetting-drying cycles is 3 times. The tests have revealed the destructive effects of FTC and WDC on the samples of lower metamorphic grade coal, and the cycles of wet-dry lead to the much higher yield of fine sizes (-6+0;-13+0 mm) than the cycles of freeze-thaw. Furthermore, it is found that the increase in the yield of fines depends on the heating temperature: coal disintegration proceeds more intensively at a higher temperature of drying.
基金supported by the National Natural Science Foundation of China(Grant Nos.42525201 and 42230710).
文摘Bio-carbonation of reactive MgO has been regarded as a promising and eco-friendly method for construction and demolition waste(CDW)cementation in various geotechnical engineering applications.However,the beneficial effect of bio-carbonation of reactive MgO cemented CDW(BCM-samples)can be altered when exposed to wetting-drying cycles induced by extreme climate changes or groundwater fluctuations.To better understand the durability of BCM-samples and their underlying deterioration mechanisms,a series of BCM-samples was prepared to investigate their physical-mechanical performance and microstructure evolution subjected to the wetting-drying cycles.The results indicated that the wetting-drying cycles can deteriorate the BCM-samples,and their physical-mechanical behaviors change quickly at the cycle beginning and then smoothly after 2 cycles.With the increase in cycling,the apparent deterioration with efflorescence and microcrack development can be observed.The mass loss and water absorption rates increased while the dry density,compressional wave velocity,and unconfined compression strength decreased.Urea pre-hydrolysis treatment can significantly improve the durability of BCM-samples,as the more hydrated magnesia carbonates(HMCs)enhance the cementing effects.After 10 cycles,the UCS of pre-hydrolyzed samples decreased 25.4%to 4.45 MPa,while that of ordinary samples decreased 50.7%to 1.20 MPa.The deterioration of BCM-samples caused by wetting-drying cycles can be attributed to two factors.One of the main factors is the structural integrity changes caused by the rapid loss of soluble material at the initial cycling stages.Another factor is the decrease in cementation induced by the loss of brucite and HMCs at the following cycle stages.
基金Project(200310) supported by Edison Research Foundation from General Electric (GE) in USAProject(59976022) supported by the National Natural Science Foundation of China
文摘In order to build the model of the drum level wave action and sloshing, based on the method of modularization modeling, the hydrodynamic model of drum level wave action and sloshing was developed, and dynamic simulation researches were carried out based on the model. The results indicate that both drum level and drum length have functional relations with period of drum level wave action and sloshing. When the drum level decreases or drum length increases, the period of drum level wave action and sloshing increases, density of liquid and number of sub-module division have little influence on the period of drum level wave action and sloshing. The model was validated by the analytical solution theory of liquid’s wave action and sloshing in cuboid container, and the 3D graphics of drum level wave action and sloshing was also obtained. The model can dynamically reflect the rules of wave action and sloshing of water in the container exactly.
基金supported by the National Natural Science Foundation of China(Grant Nos.42177138 and 41907239)the Central Guidance Funds for Local Science and Technology Development of China(Grant No.YDZJSX2025D031).
文摘Loess landslides are major hazards in the Chinese Loess Plateau(CLP).The loess in this region is frequently subjected to repeated wetting–drying(W-D)cycles due to climatic factors,which significantly increases the likelihood of landslides.Therefore,investigating the shear behavior and microstructural evolution of loess under climate-induced W-D cycles is crucial to understanding the mechanisms of loess landslides.In this study,Malan loess is analyzed using unsaturated triaxial tests,resistivity tests,scanning electron microscopy,and mercury intrusion porosimetry.The test results show that shear strength decreases with increased W-D cycles,and the degradation effect is more pronounced under lower confining pressure.The variations in conductive pathways indicate that electrical resistivity can effectively reflect the structural damage of loess during W-D cycles,which is associated with increased direct point contacts and spaced pores.Aggregation of clay particles and growth of cracks during the W-D cycles can further destabilize the loess microstructure.As the confining pressure increases,crushed particles rearrange and convert spaced pores into intergranular pores.The number and peak intensity of dominant spaced pores decrease,resulting in a more stable structure.This study clarifies the mechanisms of loess landslides under W-D cycles and provides theoretical support for landslide prevention and control in the CLP.
