Based on the monthly precipitation data of 116 meteorological stations in Shandong Province during 1970-2021,standardized precipitation index(SPI)was calculated,and the methods of linear fitting,mutation test and Morl...Based on the monthly precipitation data of 116 meteorological stations in Shandong Province during 1970-2021,standardized precipitation index(SPI)was calculated,and the methods of linear fitting,mutation test and Morlet wavelet analysis were used to analyze the change trend and temporal and spatial distribution characteristics of SPI index in the past 52 years.The results show that there were more normal years in Shandong Province,and the frequency reached 38.46%.There was severe drought in the 1980s and more wet years after 2003.SPI index showed an upward trend in spring,summer and winter but a weak arid trend in autumn.In addition,intense dry weather was more frequent in summer.Spatially,the climate was normal or humid in most areas of Shandong Province.The regions with more wet years were located in the central and northeast Shandong and the peninsula,while the climate was normal in the southwest and north of Shandong.The areas with more dry years were mainly located in the northwest of Shandong Province.There was mainly local and global drought in Shandong Province,and the arid area showed a decreasing trend.In the past 52 years,Shandong Province experienced quasi-4 times of alternation between dry and wet climate.The long period of 21 a was the first main period,and the climate would be still wet in Shandong Province in the future.In terms of mutation,the climate in Shandong Province became humid after 2003,and 2003 was the mutation point.After the abrupt change,the climate changed from gradually drying to wetting.展开更多
Underwater launch is a transient vibration process under the impact load.The hydrodynamic calculation is an important part of equipment research.In this paper,firstly,combining the theory of the Euler-Bernoulli beam a...Underwater launch is a transient vibration process under the impact load.The hydrodynamic calculation is an important part of equipment research.In this paper,firstly,combining the theory of the Euler-Bernoulli beam and the potential flow,the transfer equation of the Euler-Bernoulli beam considering the hydroelastic effect is derived,which expands the application scope of the transfer matrix.The correctness of the transfer matrix for the beam with hydroelastic behaviors is verified by comparison with the results of the finite element analysis.Then the dynamics model of the underwater launch system is established based on the multibody system transfer matrix method,and the beam with hydroelastic behaviors is employed as the external vehicle.Subsequently,the overall transfer and dynamic equation are derived,resulting in the solution of the wet natural frequency and the dynamic response under the impact load.The comparison with experimental data validates the dynamics model and simulation results and ensures its reliability in practical applications.The dynamic of the system demonstrates that the launching interval and adjacent tube effect will exert an influence on the subsequent emission.This research provides a fast and efficient method for the dynamic calculation of the underwater launch system.展开更多
Surface wave plasma(SWP) is a kind of low temperature plasma which can be utilized for material development.In this research,argon and oxygen were used as a working gas for an SWP experiment and the influence of the p...Surface wave plasma(SWP) is a kind of low temperature plasma which can be utilized for material development.In this research,argon and oxygen were used as a working gas for an SWP experiment and the influence of the plasma irradiation on a copper surface was examined.Particular,relation between the spatial characteristics of SWP and wetting characteristics was examined.As a result,it was found that spatial characteristics of the SWP affected the wetting characteristics and the oxidation characteristics.展开更多
Indian hematite fines are normally characterized by high iron grade and minor impurities, which are usually used for sinter fines. With macroscale operations technology of blast furnace in Indian, pellets, as a kind o...Indian hematite fines are normally characterized by high iron grade and minor impurities, which are usually used for sinter fines. With macroscale operations technology of blast furnace in Indian, pellets, as a kind of high-quality materials, attract more and more attention. However, the hematite fines possess the coarse size. Hence, they inevitably need to be further finely ground for pelletizing before balling. The grinding behavior of Indian hematite fines was revealed by conducting the ball milling tests and determining the Bond ball mill work index （Wi）. The results show that Indian hematite fines have an excellent grindability with Wi of only 7.40-7.73 kWh/t, indicating that ball milling is an economically viable way to pretreat Indian hematite fines. Nonetheless, due to poor sedimentation and filtering properties of wet ground products, the dry ball milling is more appropriate to process Indian hematite fines. In addition, the superior quality green balls can be manufactured with dry ground products under the conditions of 0.5% bentonite dosage, 7.5% moisture and balling for 12 min, which further confirmed that the recommended pellet feed preparation technique is reasonable.展开更多
基金Supported by the Special Project for the Grass-roots Units of Shandong Meteorological Bureau(2023SDJC14).
文摘Based on the monthly precipitation data of 116 meteorological stations in Shandong Province during 1970-2021,standardized precipitation index(SPI)was calculated,and the methods of linear fitting,mutation test and Morlet wavelet analysis were used to analyze the change trend and temporal and spatial distribution characteristics of SPI index in the past 52 years.The results show that there were more normal years in Shandong Province,and the frequency reached 38.46%.There was severe drought in the 1980s and more wet years after 2003.SPI index showed an upward trend in spring,summer and winter but a weak arid trend in autumn.In addition,intense dry weather was more frequent in summer.Spatially,the climate was normal or humid in most areas of Shandong Province.The regions with more wet years were located in the central and northeast Shandong and the peninsula,while the climate was normal in the southwest and north of Shandong.The areas with more dry years were mainly located in the northwest of Shandong Province.There was mainly local and global drought in Shandong Province,and the arid area showed a decreasing trend.In the past 52 years,Shandong Province experienced quasi-4 times of alternation between dry and wet climate.The long period of 21 a was the first main period,and the climate would be still wet in Shandong Province in the future.In terms of mutation,the climate in Shandong Province became humid after 2003,and 2003 was the mutation point.After the abrupt change,the climate changed from gradually drying to wetting.
基金supported by the National Natural Science Foundation of China(Grant No.92266201).
文摘Underwater launch is a transient vibration process under the impact load.The hydrodynamic calculation is an important part of equipment research.In this paper,firstly,combining the theory of the Euler-Bernoulli beam and the potential flow,the transfer equation of the Euler-Bernoulli beam considering the hydroelastic effect is derived,which expands the application scope of the transfer matrix.The correctness of the transfer matrix for the beam with hydroelastic behaviors is verified by comparison with the results of the finite element analysis.Then the dynamics model of the underwater launch system is established based on the multibody system transfer matrix method,and the beam with hydroelastic behaviors is employed as the external vehicle.Subsequently,the overall transfer and dynamic equation are derived,resulting in the solution of the wet natural frequency and the dynamic response under the impact load.The comparison with experimental data validates the dynamics model and simulation results and ensures its reliability in practical applications.The dynamic of the system demonstrates that the launching interval and adjacent tube effect will exert an influence on the subsequent emission.This research provides a fast and efficient method for the dynamic calculation of the underwater launch system.
文摘Surface wave plasma(SWP) is a kind of low temperature plasma which can be utilized for material development.In this research,argon and oxygen were used as a working gas for an SWP experiment and the influence of the plasma irradiation on a copper surface was examined.Particular,relation between the spatial characteristics of SWP and wetting characteristics was examined.As a result,it was found that spatial characteristics of the SWP affected the wetting characteristics and the oxidation characteristics.
基金The authors would like to acknowledge the Analytical and Testing Center of Central South University to supply the facilities to fulfill the measurements. The authors also wish to express their thanks to the National Natural Science Foundation of China （No. 51474161） and Hunan Provincial Innovation Foundation for Postgraduate （CX2017B056） for the financial support of this research.
文摘Indian hematite fines are normally characterized by high iron grade and minor impurities, which are usually used for sinter fines. With macroscale operations technology of blast furnace in Indian, pellets, as a kind of high-quality materials, attract more and more attention. However, the hematite fines possess the coarse size. Hence, they inevitably need to be further finely ground for pelletizing before balling. The grinding behavior of Indian hematite fines was revealed by conducting the ball milling tests and determining the Bond ball mill work index （Wi）. The results show that Indian hematite fines have an excellent grindability with Wi of only 7.40-7.73 kWh/t, indicating that ball milling is an economically viable way to pretreat Indian hematite fines. Nonetheless, due to poor sedimentation and filtering properties of wet ground products, the dry ball milling is more appropriate to process Indian hematite fines. In addition, the superior quality green balls can be manufactured with dry ground products under the conditions of 0.5% bentonite dosage, 7.5% moisture and balling for 12 min, which further confirmed that the recommended pellet feed preparation technique is reasonable.
