The denoising of microseismic signals is a prerequisite for subsequent analysis and research.In this research,a new microseismic signal denoising algorithm called the Black Widow Optimization Algorithm(BWOA)optimized ...The denoising of microseismic signals is a prerequisite for subsequent analysis and research.In this research,a new microseismic signal denoising algorithm called the Black Widow Optimization Algorithm(BWOA)optimized VariationalMode Decomposition(VMD)jointWavelet Threshold Denoising(WTD)algorithm(BVW)is proposed.The BVW algorithm integrates VMD and WTD,both of which are optimized by BWOA.Specifically,this algorithm utilizes VMD to decompose the microseismic signal to be denoised into several Band-Limited IntrinsicMode Functions(BLIMFs).Subsequently,these BLIMFs whose correlation coefficients with the microseismic signal to be denoised are higher than a threshold are selected as the effective mode functions,and the effective mode functions are denoised using WTD to filter out the residual low-and intermediate-frequency noise.Finally,the denoised microseismic signal is obtained through reconstruction.The ideal values of VMD parameters and WTD parameters are acquired by searching with BWOA to achieve the best VMD decomposition performance and solve the problem of relying on experience and requiring a large workload in the application of the WTD algorithm.The outcomes of simulated experiments indicate that this algorithm is capable of achieving good denoising performance under noise of different intensities,and the denoising performance is significantly better than the commonly used VMD and Empirical Mode Decomposition(EMD)algorithms.The BVW algorithm is more efficient in filtering noise,the waveform after denoising is smoother,the amplitude of the waveform is the closest to the original signal,and the signal-to-noise ratio(SNR)and the root mean square error after denoising are more satisfying.The case based on Fankou Lead-Zinc Mine shows that for microseismic signals with different intensities of noise monitored on-site,compared with VMD and EMD,the BVW algorithm ismore efficient in filtering noise,and the SNR after denoising is higher.展开更多
Plant diseases are a major threat that can severely impact the production of agriculture and forestry.This can lead to the disruption of ecosystem functions and health.With its ability to capture continuous narrow-ban...Plant diseases are a major threat that can severely impact the production of agriculture and forestry.This can lead to the disruption of ecosystem functions and health.With its ability to capture continuous narrow-band spectra,hyperspectral technology has become a crucial tool to monitor crop diseases using remote sensing.However,existing continuous wavelet analysis(CWA)methods suffer from feature redundancy issues,while the continuous wavelet projection algorithm(CWPA),an optimization approach for feature selection,has not been fully validated to monitor plant diseases.This study utilized rice bacterial leaf blight(BLB)as an example by evaluating the performance of four wavelet basis functions-Gaussian2,Mexican hat,Meyer,andMorlet-within theCWAandCWPAframeworks.Additionally,the classification models were constructed using the k-nearest neighbors(KNN),randomforest(RF),and Naïve Bayes(NB)algorithms.The results showed the following:(1)Compared to traditional CWA,CWPA significantly reduced the number of required features.Under the CWPA framework,almost all the model combinations achieved maximum classification accuracy with only one feature.In contrast,the CWA framework required three to seven features.(2)Thechoice of wavelet basis functions markedly affected the performance of themodel.Of the four functions tested,the Meyer wavelet demonstrated the best overall performance in both the CWPA and CWA frameworks.(3)Under theCWPAframework,theMeyer-KNNandMeyer-NBcombinations achieved the highest overall accuracy of 93.75%using just one feature.In contrast,under the CWA framework,the CWA-RF combination achieved comparable accuracy(93.75%)but required six features.This study verified the technical advantages of CWPA for monitoring crop diseases,identified an optimal wavelet basis function selection scheme,and provided reliable technical support to precisely monitor BLB in rice(Oryza sativa).Moreover,the proposed methodological framework offers a scalable approach for the early diagnosis and assessment of plant stress,which can contribute to improved accuracy and timeliness when plant stress is monitored.展开更多
To eliminate distortion caused by vertical drift and illusory slopes in atomic force microscopy(AFM)imaging,a lifting-wavelet-based iterative thresholding correction method is proposed in this paper.This method achiev...To eliminate distortion caused by vertical drift and illusory slopes in atomic force microscopy(AFM)imaging,a lifting-wavelet-based iterative thresholding correction method is proposed in this paper.This method achieves high-quality AFM imaging via line-by-line corrections for each distorted profile along the fast axis.The key to this line-by-line correction is to accurately simulate the profile distortion of each scanning row.Therefore,a data preprocessing approach is first developed to roughly filter out most of the height data that impairs the accuracy of distortion modeling.This process is implemented through an internal double-screening mechanism.A line-fitting method is adopted to preliminarily screen out the obvious specimens.Lifting wavelet analysis is then carried out to identify the base parts that are mistakenly filtered out as specimens so as to preserve most of the base profiles and provide a good basis for further distortion modeling.Next,an iterative thresholding algorithm is developed to precisely simulate the profile distortion.By utilizing the roughly screened base profile,the optimal threshold,which is used to screen out the pure bases suitable for distortion modeling,is determined through iteration with a specified error rule.On this basis,the profile distortion is accurately modeled through line fitting on the finely screened base data,and the correction is implemented by subtracting the modeling result from the distorted profile.Finally,the effectiveness of the proposed method is verified through experiments and applications.展开更多
Considering the noise problem of the acquisition signals frommechanical transmission systems,a novel denoising method is proposed that combines Variational Mode Decomposition(VMD)with wavelet thresholding.The key inno...Considering the noise problem of the acquisition signals frommechanical transmission systems,a novel denoising method is proposed that combines Variational Mode Decomposition(VMD)with wavelet thresholding.The key innovation of this method lies in the optimization of VMD parameters K and α using the improved Horned Lizard Optimization Algorithm(IHLOA).An inertia weight parameter is introduced into the random walk strategy of HLOA,and the related formula is improved.The acquisition signal can be adaptively decomposed into some Intrinsic Mode Functions(IMFs),and the high-noise IMFs are identified based on a correlation coefficient-variance method.Further noise reduction is achieved using wavelet thresholding.The proposed method is validated using simulated signals and experimental signals,and simulation results indicate that the proposed method surpasses original VMD,Empirical Mode Decomposition(EMD),and wavelet thresholding in terms of Signal-to-Noise Ratio(SNR)and Root Mean Square Error(RMSE),and experimental results indicate that the proposedmethod can effectively remove noise in terms of three evaluationmetrics.Furthermore,comparedwith FeatureModeDecomposition(FMD)andMultichannel Singular Spectrum Analysis(MSSA),this method has a better envelope spectrum.This method not only provides a solution for noise reduction in signal processing but also holds significant potential for applications in structural health monitoring and fault diagnosis.展开更多
The optimal attitude control of an underactuated spacecraft is investigated in this paper. The flywheels of the spacecraft can somehow only provide control inputs in two independent directions. The dynamic equations a...The optimal attitude control of an underactuated spacecraft is investigated in this paper. The flywheels of the spacecraft can somehow only provide control inputs in two independent directions. The dynamic equations are formulated for the spacecraft under a nonholonomic constraint resulting from the constant time-rate of the total angular momentum of the system. The reorientation of such underactuated spacecraft is transformed into an optimal control problem. A genetic algorithm is proposed to derive the control laws of the two flywheels angle velocity inputs. The control laws are approximated by the discrete orthogonal wavelets. The numerical simulations indicate that the genetic algorithm with the wavelet approximation is an effective approach to deal with the optimal reorientation of underactuated spacecraft.展开更多
Wind speed forecasting is of great importance for wind farm management and plays an important role in grid integration. Wind speed is volatile in nature and therefore it is difficult to predict with a single model. In...Wind speed forecasting is of great importance for wind farm management and plays an important role in grid integration. Wind speed is volatile in nature and therefore it is difficult to predict with a single model. In this study, three hybrid multi-step wind speed forecasting models are developed and compared — with each other and with earlier proposed wind speed forecasting models. The three models are based on wavelet decomposition(WD), the Cuckoo search(CS) optimization algorithm, and a wavelet neural network(WNN). They are referred to as CS-WD-ANN(artificial neural network), CS-WNN, and CS-WD-WNN, respectively. Wind speed data from two wind farms located in Shandong, eastern China, are used in this study. The simulation result indicates that CS-WD-WNN outperforms the other two models, with minimum statistical errors. Comparison with earlier models shows that CS-WD-WNN still performs best, with the smallest statistical errors. The employment of the CS optimization algorithm in the models shows improvement compared with the earlier models.展开更多
Spectroscopy can be used for detecting crop characteristics. A goal of crop spectrum analysis is to extract effective features from spectral data for establishing a detection model. An ideal spectral feature set shoul...Spectroscopy can be used for detecting crop characteristics. A goal of crop spectrum analysis is to extract effective features from spectral data for establishing a detection model. An ideal spectral feature set should have high sensitivity to target parameters but low information redundancy among features.However, feature-selection methods that satisfy both requirements are lacking. To address this issue,in this study, a novel method, the continuous wavelet projections algorithm(CWPA), was developed,which has advantages of both continuous wavelet analysis(CWA) and the successive projections algorithm(SPA) for generating optimal spectral feature set for crop detection. Three datasets collected for crop stress detection and retrieval of biochemical properties were used to validate the CWPA under both classification and regression scenarios. The CWPA generated a feature set with fewer features yet achieving accuracy comparable to or even higher than those of CWA and SPA. With only two to three features identified by CWPA, an overall accuracy of 98% in classifying tea plant stresses was achieved, and high coefficients of determination were obtained in retrieving corn leaf chlorophyll content(R^(2)= 0.8521)and equivalent water thickness(R^(2)= 0.9508). The mechanism of the CWPA ensures that the novel algorithm discovers the most sensitive features while retaining complementarity among features. Its ability to reduce the data dimension suggests its potential for crop monitoring and phenotyping with hyperspectral data.展开更多
Direct algorithm of wavelet transform (WT) is the numerical algorithmobtained from the integral formula of WT by directly digitization. Some problems on realizing thealgorithm are studied. Some conclusions on the dire...Direct algorithm of wavelet transform (WT) is the numerical algorithmobtained from the integral formula of WT by directly digitization. Some problems on realizing thealgorithm are studied. Some conclusions on the direct algorithm of discrete wavelet transform (DWT),such as discrete convolution operation formula of wavelet coefficients and wavelet components,sampling principle and technology to wavelets, deciding method for scale range of wavelets, measuresto solve edge effect problem, etc, are obtained. The realization of direct algorithm of continuouswavelet transform (CWT) is also studied. The computing cost of direct algorithm and Mallat algorithmof DWT are still studied, and the computing formulae are obtained. These works are beneficial todeeply understand WT and Mallat algorithm. Examples in the end show that direct algorithm can alsobe applied widely.展开更多
The accurate identification and classification of various power quality disturbances are keys to ensuring high-quality electrical energy. In this study, the statistical characteristics of the disturbance signal of wav...The accurate identification and classification of various power quality disturbances are keys to ensuring high-quality electrical energy. In this study, the statistical characteristics of the disturbance signal of wavelet transform coefficients and wavelet transform energy distribution constitute feature vectors. These vectors are then trained and tested using SVM multi-class algorithms. Experimental results demonstrate that the SVM multi-class algorithms, which use the Gaussian radial basis function, exponential radial basis function, and hyperbolic tangent function as basis functions, are suitable methods for power quality disturbance classification.展开更多
The modeling and optimization of an industrial-scale crude distillation unit （CDU） are addressed. The main spec- ifications and base conditions of CDU are taken from a crude oil refinery in Wuhan, China. For modelin...The modeling and optimization of an industrial-scale crude distillation unit （CDU） are addressed. The main spec- ifications and base conditions of CDU are taken from a crude oil refinery in Wuhan, China. For modeling of a com- plicated CDU, an improved wavelet neural network （WNN） is presented to model the complicated CDU, in which novel parametric updating laws are developed to precisely capture the characteristics of CDU. To address CDU in an economically optimal manner, an economic optimization algorithm under prescribed constraints is presented. By using a combination of WNN-based optimization model and line-up competition algorithm （LCA）, the supe- rior performance of the proposed approach is verified. Compared with the base operating condition, it is validat- ed that the increments of products including kerosene and diesel are up to 20% at least by increasing less than 5% duties of intermediate coolers such as second pump-around （PA2） and third Dump-around （PA3）.展开更多
A theoretical relationship between the wavelet transform and the fast fourier transformation(FFT) methods in broadband wireless signal is proposed for solving the direction of arrivals(DOAs) estimation problem. This l...A theoretical relationship between the wavelet transform and the fast fourier transformation(FFT) methods in broadband wireless signal is proposed for solving the direction of arrivals(DOAs) estimation problem. This leads naturally to the derivation of minimum variance distortionless response(MVDR) algorithm, which combines the benefits of subspace methods with those of wavelet, and spatially smoothed versions are utilized which exhibits good performance against correlated signals. We test the method's performance by simulating and comparing the performance of proposed algorithm, FFT MVDR and MVDR with correlated signals, and an improved performance is obtained.展开更多
An improved wavelet neural network algorithm which combines with particle swarm optimization was proposed to avoid encountering the curse of dimensionality and overcome the shortage in the responding speed and learnin...An improved wavelet neural network algorithm which combines with particle swarm optimization was proposed to avoid encountering the curse of dimensionality and overcome the shortage in the responding speed and learning ability brought about by the traditional models. Based on the operational data provided by a regional power grid in the south of China, the method was used in the actual short term load forecasting. The results show that the average time cost of the proposed method in the experiment process is reduced by 12.2 s, and the precision of the proposed method is increased by 3.43% compared to the traditional wavelet network. Consequently, the improved wavelet neural network forecasting model is better than the traditional wavelet neural network forecasting model in both forecasting effect and network function.展开更多
The dropping off of data during information transmission and the storage device’s damage etc.often leads the sampled data to be non-uniform.The paper, based on the stability theory of irregular wavelet frame and the ...The dropping off of data during information transmission and the storage device’s damage etc.often leads the sampled data to be non-uniform.The paper, based on the stability theory of irregular wavelet frame and the irregular weighted wavelet frame operator,proposed an irregular weighted wavelet fame conjugate gradient iterative algorithm for the reconstruction of non-uniformly sampling signal. Compared the experiment results with the iterative algorithm of the Ref.[5],the new algorithm has remarkable advantages in approximation error,running time and so on.展开更多
An effective processing method for biomedical images and the Fuzzy C-mean (FCM) algorithm based on the wavelet transform are investigated.By using hierarchical wavelet decomposition, an original image could be decompo...An effective processing method for biomedical images and the Fuzzy C-mean (FCM) algorithm based on the wavelet transform are investigated.By using hierarchical wavelet decomposition, an original image could be decomposed into one lower image and several detail images. The segmentation started at the lowest resolution with the FCM clustering algorithm and the texture feature extracted from various sub-bands. With the improvement of the FCM algorithm, FCM alternation frequency was decreased and the accuracy of segmentation was advanced.展开更多
Based on the brief introduction of the principles of wavelet analysis, this paper gives a summary of several typical wavelet bases from the point of view of perfect reconstruction of signals and emphasizes that design...Based on the brief introduction of the principles of wavelet analysis, this paper gives a summary of several typical wavelet bases from the point of view of perfect reconstruction of signals and emphasizes that designing wavelet bases which are used to decompose the signal into a two-band form is equivalent to designing a two-band filter bank with perfect or nearly perfect property. The generating algorithm corresponding to Daubechies bases and some simulated results are also given in the paper.展开更多
In this paper, algorithms of constructing wavelet filters based on genetic algorithm are studied with emphasis on how to construct the optimal wavelet filters used to compress a given image, due to efficient coding of...In this paper, algorithms of constructing wavelet filters based on genetic algorithm are studied with emphasis on how to construct the optimal wavelet filters used to compress a given image, due to efficient coding of the chromosome and the fitness function, and due to the global optimization algorithm, this method turns out to be perfect for the compression of the images.展开更多
In the ultrasonic detection of defects in friction welded joints, it is difficult to exactly detect some weak bonding defects because of the noise pollution. This paper proposed an improved threshold function based on...In the ultrasonic detection of defects in friction welded joints, it is difficult to exactly detect some weak bonding defects because of the noise pollution. This paper proposed an improved threshold function based on the multi-resolution analysis wavelet threshold de-noising method which was put forward by Donoho and Johnstone, and applied this method in the de-noising of the defective signals. This threshold function overcomes the discontinuous shortcoming of the hard-threshold function and the disadvantage of soft threshold function which causes an invariable deviation between the estimated wavelet coeffwients and the decomposed wavelet coefficients. The improved threshold function is of simple expression and convenient for calculation. The actual test results of defect noise signal show that this improved method can get less mean square error （ MSE ） and higher signal-to-noise ratio of reconstructed signals than those calculated from hard threshold and soft threshold methods. The improved threshold function has excellent de-noising effect.展开更多
An orthogonal wavelet transform fractionally spaced blind equalization algorithm based on the optimization of genetic algorithm(WTFSE-GA) is proposed in viewof the lowconvergence rate,large steady-state mean square er...An orthogonal wavelet transform fractionally spaced blind equalization algorithm based on the optimization of genetic algorithm(WTFSE-GA) is proposed in viewof the lowconvergence rate,large steady-state mean square error and local convergence of traditional constant modulus blind equalization algorithm(CMA).The proposed algorithm can reduce the signal autocorrelation through the orthogonal wavelet transform of input signal of fractionally spaced blind equalizer,and decrease the possibility of CMA local convergence by using the global random search characteristics of genetic algorithm to optimize the equalizer weight vector.The proposed algorithm has the faster convergence rate and smaller mean square error compared with FSE and WT-FSE.The efficiency of the proposed algorithm is proved by computer simulation of underwater acoustic channels.展开更多
Genetic algorithm (GA) based on wavelet transform threshold shrinkage (WTS) and translation-invariant threshold shrinkage (TIS) is introduced into the method of noise reduction, where parameters used in WTS and TIS, s...Genetic algorithm (GA) based on wavelet transform threshold shrinkage (WTS) and translation-invariant threshold shrinkage (TIS) is introduced into the method of noise reduction, where parameters used in WTS and TIS, such as wavelet function, decomposition levels, hard or soft threshold and threshold can be selected automatically. This paper ends by comparing two noise reduction methods on the basis of their denoising performances, computation time, etc. The effectiveness of these methods in-troduced in this paper is validated by the results of analysis of the simulated and real signals.展开更多
基金funded by the National Natural Science Foundation of China(Grant No.51874350)the National Natural Science Foundation of China(Grant No.52304127)+2 种基金the Fundamental Research Funds for the Central Universities of Central South University(Grant No.2020zzts200)the Science Foundation of the Fuzhou University(Grant No.511229)Fuzhou University Testing Fund of Precious Apparatus(Grant No.2024T040).
文摘The denoising of microseismic signals is a prerequisite for subsequent analysis and research.In this research,a new microseismic signal denoising algorithm called the Black Widow Optimization Algorithm(BWOA)optimized VariationalMode Decomposition(VMD)jointWavelet Threshold Denoising(WTD)algorithm(BVW)is proposed.The BVW algorithm integrates VMD and WTD,both of which are optimized by BWOA.Specifically,this algorithm utilizes VMD to decompose the microseismic signal to be denoised into several Band-Limited IntrinsicMode Functions(BLIMFs).Subsequently,these BLIMFs whose correlation coefficients with the microseismic signal to be denoised are higher than a threshold are selected as the effective mode functions,and the effective mode functions are denoised using WTD to filter out the residual low-and intermediate-frequency noise.Finally,the denoised microseismic signal is obtained through reconstruction.The ideal values of VMD parameters and WTD parameters are acquired by searching with BWOA to achieve the best VMD decomposition performance and solve the problem of relying on experience and requiring a large workload in the application of the WTD algorithm.The outcomes of simulated experiments indicate that this algorithm is capable of achieving good denoising performance under noise of different intensities,and the denoising performance is significantly better than the commonly used VMD and Empirical Mode Decomposition(EMD)algorithms.The BVW algorithm is more efficient in filtering noise,the waveform after denoising is smoother,the amplitude of the waveform is the closest to the original signal,and the signal-to-noise ratio(SNR)and the root mean square error after denoising are more satisfying.The case based on Fankou Lead-Zinc Mine shows that for microseismic signals with different intensities of noise monitored on-site,compared with VMD and EMD,the BVW algorithm ismore efficient in filtering noise,and the SNR after denoising is higher.
基金supported by the‘Pioneer’and‘Leading Goose’R&D Program of Zhejiang(Grant No.2023C02018)Zhejiang Provincial Natural Science Foundation of China(Grant No.LTGN23D010002)+2 种基金National Natural Science Foundation of China(Grant No.42371385)Funds of the Natural Science Foundation of Hangzhou(Grant No.2024SZRYBD010001)Nanxun Scholars Program of ZJWEU(Grant No.RC2022010755).
文摘Plant diseases are a major threat that can severely impact the production of agriculture and forestry.This can lead to the disruption of ecosystem functions and health.With its ability to capture continuous narrow-band spectra,hyperspectral technology has become a crucial tool to monitor crop diseases using remote sensing.However,existing continuous wavelet analysis(CWA)methods suffer from feature redundancy issues,while the continuous wavelet projection algorithm(CWPA),an optimization approach for feature selection,has not been fully validated to monitor plant diseases.This study utilized rice bacterial leaf blight(BLB)as an example by evaluating the performance of four wavelet basis functions-Gaussian2,Mexican hat,Meyer,andMorlet-within theCWAandCWPAframeworks.Additionally,the classification models were constructed using the k-nearest neighbors(KNN),randomforest(RF),and Naïve Bayes(NB)algorithms.The results showed the following:(1)Compared to traditional CWA,CWPA significantly reduced the number of required features.Under the CWPA framework,almost all the model combinations achieved maximum classification accuracy with only one feature.In contrast,the CWA framework required three to seven features.(2)Thechoice of wavelet basis functions markedly affected the performance of themodel.Of the four functions tested,the Meyer wavelet demonstrated the best overall performance in both the CWPA and CWA frameworks.(3)Under theCWPAframework,theMeyer-KNNandMeyer-NBcombinations achieved the highest overall accuracy of 93.75%using just one feature.In contrast,under the CWA framework,the CWA-RF combination achieved comparable accuracy(93.75%)but required six features.This study verified the technical advantages of CWPA for monitoring crop diseases,identified an optimal wavelet basis function selection scheme,and provided reliable technical support to precisely monitor BLB in rice(Oryza sativa).Moreover,the proposed methodological framework offers a scalable approach for the early diagnosis and assessment of plant stress,which can contribute to improved accuracy and timeliness when plant stress is monitored.
基金supported by the National Natural Science Foundation of China under Grant No.21933006.
文摘To eliminate distortion caused by vertical drift and illusory slopes in atomic force microscopy(AFM)imaging,a lifting-wavelet-based iterative thresholding correction method is proposed in this paper.This method achieves high-quality AFM imaging via line-by-line corrections for each distorted profile along the fast axis.The key to this line-by-line correction is to accurately simulate the profile distortion of each scanning row.Therefore,a data preprocessing approach is first developed to roughly filter out most of the height data that impairs the accuracy of distortion modeling.This process is implemented through an internal double-screening mechanism.A line-fitting method is adopted to preliminarily screen out the obvious specimens.Lifting wavelet analysis is then carried out to identify the base parts that are mistakenly filtered out as specimens so as to preserve most of the base profiles and provide a good basis for further distortion modeling.Next,an iterative thresholding algorithm is developed to precisely simulate the profile distortion.By utilizing the roughly screened base profile,the optimal threshold,which is used to screen out the pure bases suitable for distortion modeling,is determined through iteration with a specified error rule.On this basis,the profile distortion is accurately modeled through line fitting on the finely screened base data,and the correction is implemented by subtracting the modeling result from the distorted profile.Finally,the effectiveness of the proposed method is verified through experiments and applications.
基金supported by Central Guidance on Local Science and Technology Development Fund of Hebei Province(Grant No.226Z1906G)funded by Science Research Project of Hebei Education Department(CXY2024038)+1 种基金funded by Basic Research Project of Shijiazhuang University in Hebei Province(241791157A)National Natural Science Foundation of China(52206224).
文摘Considering the noise problem of the acquisition signals frommechanical transmission systems,a novel denoising method is proposed that combines Variational Mode Decomposition(VMD)with wavelet thresholding.The key innovation of this method lies in the optimization of VMD parameters K and α using the improved Horned Lizard Optimization Algorithm(IHLOA).An inertia weight parameter is introduced into the random walk strategy of HLOA,and the related formula is improved.The acquisition signal can be adaptively decomposed into some Intrinsic Mode Functions(IMFs),and the high-noise IMFs are identified based on a correlation coefficient-variance method.Further noise reduction is achieved using wavelet thresholding.The proposed method is validated using simulated signals and experimental signals,and simulation results indicate that the proposed method surpasses original VMD,Empirical Mode Decomposition(EMD),and wavelet thresholding in terms of Signal-to-Noise Ratio(SNR)and Root Mean Square Error(RMSE),and experimental results indicate that the proposedmethod can effectively remove noise in terms of three evaluationmetrics.Furthermore,comparedwith FeatureModeDecomposition(FMD)andMultichannel Singular Spectrum Analysis(MSSA),this method has a better envelope spectrum.This method not only provides a solution for noise reduction in signal processing but also holds significant potential for applications in structural health monitoring and fault diagnosis.
基金supported by the National Natural Science Foundation of China (10772020)
文摘The optimal attitude control of an underactuated spacecraft is investigated in this paper. The flywheels of the spacecraft can somehow only provide control inputs in two independent directions. The dynamic equations are formulated for the spacecraft under a nonholonomic constraint resulting from the constant time-rate of the total angular momentum of the system. The reorientation of such underactuated spacecraft is transformed into an optimal control problem. A genetic algorithm is proposed to derive the control laws of the two flywheels angle velocity inputs. The control laws are approximated by the discrete orthogonal wavelets. The numerical simulations indicate that the genetic algorithm with the wavelet approximation is an effective approach to deal with the optimal reorientation of underactuated spacecraft.
基金supported by the National Key Research and Development Program of China [grant number2017YFA0604500]
文摘Wind speed forecasting is of great importance for wind farm management and plays an important role in grid integration. Wind speed is volatile in nature and therefore it is difficult to predict with a single model. In this study, three hybrid multi-step wind speed forecasting models are developed and compared — with each other and with earlier proposed wind speed forecasting models. The three models are based on wavelet decomposition(WD), the Cuckoo search(CS) optimization algorithm, and a wavelet neural network(WNN). They are referred to as CS-WD-ANN(artificial neural network), CS-WNN, and CS-WD-WNN, respectively. Wind speed data from two wind farms located in Shandong, eastern China, are used in this study. The simulation result indicates that CS-WD-WNN outperforms the other two models, with minimum statistical errors. Comparison with earlier models shows that CS-WD-WNN still performs best, with the smallest statistical errors. The employment of the CS optimization algorithm in the models shows improvement compared with the earlier models.
基金supported by the National Natural Science Foundation of China (42071420)the Major Special Project for 2025 Scientific,Technological Innovation (Major Scientific and Technological Task Project in Ningbo City)(2021Z048)the National Key Research and Development Program of China(2019YFE0125300)。
文摘Spectroscopy can be used for detecting crop characteristics. A goal of crop spectrum analysis is to extract effective features from spectral data for establishing a detection model. An ideal spectral feature set should have high sensitivity to target parameters but low information redundancy among features.However, feature-selection methods that satisfy both requirements are lacking. To address this issue,in this study, a novel method, the continuous wavelet projections algorithm(CWPA), was developed,which has advantages of both continuous wavelet analysis(CWA) and the successive projections algorithm(SPA) for generating optimal spectral feature set for crop detection. Three datasets collected for crop stress detection and retrieval of biochemical properties were used to validate the CWPA under both classification and regression scenarios. The CWPA generated a feature set with fewer features yet achieving accuracy comparable to or even higher than those of CWA and SPA. With only two to three features identified by CWPA, an overall accuracy of 98% in classifying tea plant stresses was achieved, and high coefficients of determination were obtained in retrieving corn leaf chlorophyll content(R^(2)= 0.8521)and equivalent water thickness(R^(2)= 0.9508). The mechanism of the CWPA ensures that the novel algorithm discovers the most sensitive features while retaining complementarity among features. Its ability to reduce the data dimension suggests its potential for crop monitoring and phenotyping with hyperspectral data.
基金This project is supported by National Natural Science Foundation of China (No.50135050)
文摘Direct algorithm of wavelet transform (WT) is the numerical algorithmobtained from the integral formula of WT by directly digitization. Some problems on realizing thealgorithm are studied. Some conclusions on the direct algorithm of discrete wavelet transform (DWT),such as discrete convolution operation formula of wavelet coefficients and wavelet components,sampling principle and technology to wavelets, deciding method for scale range of wavelets, measuresto solve edge effect problem, etc, are obtained. The realization of direct algorithm of continuouswavelet transform (CWT) is also studied. The computing cost of direct algorithm and Mallat algorithmof DWT are still studied, and the computing formulae are obtained. These works are beneficial todeeply understand WT and Mallat algorithm. Examples in the end show that direct algorithm can alsobe applied widely.
文摘The accurate identification and classification of various power quality disturbances are keys to ensuring high-quality electrical energy. In this study, the statistical characteristics of the disturbance signal of wavelet transform coefficients and wavelet transform energy distribution constitute feature vectors. These vectors are then trained and tested using SVM multi-class algorithms. Experimental results demonstrate that the SVM multi-class algorithms, which use the Gaussian radial basis function, exponential radial basis function, and hyperbolic tangent function as basis functions, are suitable methods for power quality disturbance classification.
基金Supported by the National Natural Science Foundation of China(No.21376185)
文摘The modeling and optimization of an industrial-scale crude distillation unit （CDU） are addressed. The main spec- ifications and base conditions of CDU are taken from a crude oil refinery in Wuhan, China. For modeling of a com- plicated CDU, an improved wavelet neural network （WNN） is presented to model the complicated CDU, in which novel parametric updating laws are developed to precisely capture the characteristics of CDU. To address CDU in an economically optimal manner, an economic optimization algorithm under prescribed constraints is presented. By using a combination of WNN-based optimization model and line-up competition algorithm （LCA）, the supe- rior performance of the proposed approach is verified. Compared with the base operating condition, it is validat- ed that the increments of products including kerosene and diesel are up to 20% at least by increasing less than 5% duties of intermediate coolers such as second pump-around （PA2） and third Dump-around （PA3）.
基金supported by the Chinese Natural Science Foundation 61401075Central University Business Fee ZYGX2015J106
文摘A theoretical relationship between the wavelet transform and the fast fourier transformation(FFT) methods in broadband wireless signal is proposed for solving the direction of arrivals(DOAs) estimation problem. This leads naturally to the derivation of minimum variance distortionless response(MVDR) algorithm, which combines the benefits of subspace methods with those of wavelet, and spatially smoothed versions are utilized which exhibits good performance against correlated signals. We test the method's performance by simulating and comparing the performance of proposed algorithm, FFT MVDR and MVDR with correlated signals, and an improved performance is obtained.
基金Project(50579101) supported by the National Natural Science Foundation of China
文摘An improved wavelet neural network algorithm which combines with particle swarm optimization was proposed to avoid encountering the curse of dimensionality and overcome the shortage in the responding speed and learning ability brought about by the traditional models. Based on the operational data provided by a regional power grid in the south of China, the method was used in the actual short term load forecasting. The results show that the average time cost of the proposed method in the experiment process is reduced by 12.2 s, and the precision of the proposed method is increased by 3.43% compared to the traditional wavelet network. Consequently, the improved wavelet neural network forecasting model is better than the traditional wavelet neural network forecasting model in both forecasting effect and network function.
基金supported by Hunan Education Office Foundation under Grant 06C260
文摘The dropping off of data during information transmission and the storage device’s damage etc.often leads the sampled data to be non-uniform.The paper, based on the stability theory of irregular wavelet frame and the irregular weighted wavelet frame operator,proposed an irregular weighted wavelet fame conjugate gradient iterative algorithm for the reconstruction of non-uniformly sampling signal. Compared the experiment results with the iterative algorithm of the Ref.[5],the new algorithm has remarkable advantages in approximation error,running time and so on.
文摘An effective processing method for biomedical images and the Fuzzy C-mean (FCM) algorithm based on the wavelet transform are investigated.By using hierarchical wavelet decomposition, an original image could be decomposed into one lower image and several detail images. The segmentation started at the lowest resolution with the FCM clustering algorithm and the texture feature extracted from various sub-bands. With the improvement of the FCM algorithm, FCM alternation frequency was decreased and the accuracy of segmentation was advanced.
文摘Based on the brief introduction of the principles of wavelet analysis, this paper gives a summary of several typical wavelet bases from the point of view of perfect reconstruction of signals and emphasizes that designing wavelet bases which are used to decompose the signal into a two-band form is equivalent to designing a two-band filter bank with perfect or nearly perfect property. The generating algorithm corresponding to Daubechies bases and some simulated results are also given in the paper.
基金Supported by the Natural Science Foundation of Education of Hunan Province(21010506)
文摘In this paper, algorithms of constructing wavelet filters based on genetic algorithm are studied with emphasis on how to construct the optimal wavelet filters used to compress a given image, due to efficient coding of the chromosome and the fitness function, and due to the global optimization algorithm, this method turns out to be perfect for the compression of the images.
文摘In the ultrasonic detection of defects in friction welded joints, it is difficult to exactly detect some weak bonding defects because of the noise pollution. This paper proposed an improved threshold function based on the multi-resolution analysis wavelet threshold de-noising method which was put forward by Donoho and Johnstone, and applied this method in the de-noising of the defective signals. This threshold function overcomes the discontinuous shortcoming of the hard-threshold function and the disadvantage of soft threshold function which causes an invariable deviation between the estimated wavelet coeffwients and the decomposed wavelet coefficients. The improved threshold function is of simple expression and convenient for calculation. The actual test results of defect noise signal show that this improved method can get less mean square error （ MSE ） and higher signal-to-noise ratio of reconstructed signals than those calculated from hard threshold and soft threshold methods. The improved threshold function has excellent de-noising effect.
基金Sponsored by the Nature Science Foundation of Jiangsu(BK2009410)
文摘An orthogonal wavelet transform fractionally spaced blind equalization algorithm based on the optimization of genetic algorithm(WTFSE-GA) is proposed in viewof the lowconvergence rate,large steady-state mean square error and local convergence of traditional constant modulus blind equalization algorithm(CMA).The proposed algorithm can reduce the signal autocorrelation through the orthogonal wavelet transform of input signal of fractionally spaced blind equalizer,and decrease the possibility of CMA local convergence by using the global random search characteristics of genetic algorithm to optimize the equalizer weight vector.The proposed algorithm has the faster convergence rate and smaller mean square error compared with FSE and WT-FSE.The efficiency of the proposed algorithm is proved by computer simulation of underwater acoustic channels.
基金Project (No. 51446020203JW0401) supported by the State KeyLaboratory of Oceanic Acoustics Foundation, China
文摘Genetic algorithm (GA) based on wavelet transform threshold shrinkage (WTS) and translation-invariant threshold shrinkage (TIS) is introduced into the method of noise reduction, where parameters used in WTS and TIS, such as wavelet function, decomposition levels, hard or soft threshold and threshold can be selected automatically. This paper ends by comparing two noise reduction methods on the basis of their denoising performances, computation time, etc. The effectiveness of these methods in-troduced in this paper is validated by the results of analysis of the simulated and real signals.
