One-port surface acoustic wave resonators(SAWRs) are fabricated on semi-insulating high-quality bulk GaN and GaN film substrates, respectively. The semi-insulating GaN substrates are grown by hydride vapor phase epita...One-port surface acoustic wave resonators(SAWRs) are fabricated on semi-insulating high-quality bulk GaN and GaN film substrates, respectively. The semi-insulating GaN substrates are grown by hydride vapor phase epitaxy(HVPE)and doped with Fe. The anisotropy of Rayleigh propagation and the electromechanical coupling coefficient in Fe-doped GaN are investigated. The difference in resonance frequency between the SAWs between [1120] GaN and [1100] GaN is about 0.25% for the Rayleigh propagation mode, which is smaller than that of non-intentionally doped GaN film(~1%)reported in the literature. The electromechanical coupling coefficient of Fe-doped GaN is about 3.03%, which is higher than that of non-intentionally doped GaN film. The one-port SAWR fabricated on an 8-μm Fe-doped GaN/sapphire substrate has a quality factor of 2050, and that fabricated on Fe-doped bulk GaN has a quality factor as high as 3650. All of our results indicate that high-quality bulk GaN is a very promising material for application in SAW devices.展开更多
A review concerning the methods of studying and describing wave groups is presented in this paper. After analysing 78 field records collected in the Shijiu Port, China, the measured parameters of wave groups and some ...A review concerning the methods of studying and describing wave groups is presented in this paper. After analysing 78 field records collected in the Shijiu Port, China, the measured parameters of wave groups and some factors describing wave groupness and their variations are given. Moreover, these results are compared with those of theory.展开更多
This paper extends a prediction model for multi-directional random wave transformation based on an energy balance equation by Mase with the consideration of wave shoaling, refraction, diffraction, reflection and break...This paper extends a prediction model for multi-directional random wave transformation based on an energy balance equation by Mase with the consideration of wave shoaling, refraction, diffraction, reflection and breaking. This numerical model is improved by 1) introducing Wen's frequency spectrum and Mitsuyasu's directional function, which are more suitable to the coastal area of China; 2) considering energy dissipation caused by bottom friction, which ensures more accurate results for large-scale and shallow water areas; 3) taking into account a non-linear dispersion relation. Predictions using the extended wave model are carried out to study the feasibility of constructing the Ai Hua yacht port in Qingdao, China, with a comparison between two port layouts in design. Wave fields inside the port for different incident wave directions, water levels and return periods are simulated, and then two kinds of parameters are calculated to evaluate the wave conditions for the two layouts. Analyses show that Layout I is better than Layout II. Calculation results also show that the harbor will be calm for different wave directions under the design water level. On the contrary, the wave conditions do not wholly meet the requirements of a yacht port for ship berthing under the extreme water level. For safety consideration, the elevation of the breakwater might need to be properly increased to prevent wave overtopping under such water level. The extended numerical simulation model may provide an effective approach to computing wave heights in a harbor.展开更多
This paper introduces the calculating procedure of the offshore design waves for the Dayaowan port area of Dalian Port. Some suggestions are proposed about the conventional calculating methods with measured waves data.
This paper presents a new implementation of a millimeter-wave heterodyne receiver based on six-port technology. The six-port model is implemented in Advanced Design System （ADS） using S-parameter measurements for re...This paper presents a new implementation of a millimeter-wave heterodyne receiver based on six-port technology. The six-port model is implemented in Advanced Design System （ADS） using S-parameter measurements for realistic advanced simulation of a short-range 60 GHz wireless link. Millimeter-wave frequency conversion is performed using a six-port down-converter. The second frequency conversion is performed using conventional means because of low IF. A comparison between the proposed receiver and a conventional balanced millimeter-wave mixer shows that the proposed receiver improves conversion loss and I/Q phase stability over the local oscillator （LO） and RF power ranges. The results of demodulating a V-band quadrature phase-shift keying （QPSK） signal at a high data rate of 100 Mb/s-1 Gb/s are discussed. The results of a bit error rate （BER） and error vector magnitude （EVM） analysis prove that the proposed architecture can be successfully used for wireless link transmission up to 10 m.展开更多
-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model te...-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.展开更多
Statistical analysis was done on simultaneous wave and wind using data recorded by discus-shape wave buoy. The area is located in the southern Caspian Sea near the Anzali Port. Recorded wave data were obtained through...Statistical analysis was done on simultaneous wave and wind using data recorded by discus-shape wave buoy. The area is located in the southern Caspian Sea near the Anzali Port. Recorded wave data were obtained through directional spectrum wave analysis. Recorded wind direction and wind speed were obtained through the related time series as well. For 12-month measurements（May 25 2007-2008）, statistical calculations were done to specify the value of nonlinear auto-correlation of wave and wind using the probability distribution function of wave characteristics and statistical analysis in various time periods. The paper also presents and analyzes the amount of wave energy for the area mentioned on the basis of available database. Analyses showed a suitable comparison between the amounts of wave energy in different seasons. As a result, the best period for the largest amount of wave energy was known. Results showed that in the research period, the mean wave and wind auto correlation were about three hours. Among the probability distribution functions, i.e Weibull, Normal, Lognormal and Rayleigh, ＂Weibull＂ had the best consistency with experimental distribution function shown in different diagrams for each season. Results also showed that the mean wave energy in the research period was about 49.88 k W/m and the maximum density of wave energy was found in February and March, 2010.展开更多
Characteristics of a natural wave cannot be successfully described by only using wave frequency spectra. In the laboratory, natural wave conditions cannot be simulated exactly by a harbor sheltering experiment with ir...Characteristics of a natural wave cannot be successfully described by only using wave frequency spectra. In the laboratory, natural wave conditions cannot be simulated exactly by a harbor sheltering experiment with irregular long-crested waves, especially since the results of diffraction tests with reflection source are often inaccurate. Only a small number of laboratories in the world have possessed a directional spectrum wave producer because of its complication and expension. This paper describes the experiment for multi-directional wave superposition of wave diffraction, with the conventional regular wave producer and one-direction irregular wave producer. The test results are of equal value with that from a directional spectra wave. This method is suitable for rational design of harbor engineering projects and can be adopted in future practice.展开更多
In this paper, the diluting effect of surface waves on a buoyant plume has been measured using a Laser Induced Fluorescence (LIF) technique. The resulting time-averaged, full field concentration maps have allowed quan...In this paper, the diluting effect of surface waves on a buoyant plume has been measured using a Laser Induced Fluorescence (LIF) technique. The resulting time-averaged, full field concentration maps have allowed quantification of enhanced mixing due to surface waves as well as measurement of other plume parameters.展开更多
This paper presents an analysis and validation by advanced system simulation of compact and low-cost six-port transceivers for future wireless local area networks （WLANs） operating at millimeter-wave frequencies. To...This paper presents an analysis and validation by advanced system simulation of compact and low-cost six-port transceivers for future wireless local area networks （WLANs） operating at millimeter-wave frequencies. To obtain realistic simulation results, a six-port model based on the measurement results of a fabricated V-band hybrid coupler, the core component, is used. A frequency-division multiplexing scheme is used by introducing four quadrature phase-shift keying （QPSK） channels in the wireless communication link. The data rate achieved is about 4 Gbit/s. The operating frequency is in the 60-64 GHz unlicensed band. Bit error rate （BER） results are presented, and a comparison is made between single-carrier and multicarrier architectures. The proposed wireless system can be considered an efficient candidate for millimeter-wave communication systems operating at quasi-optical data rates.展开更多
基金Project supported by the National Key Research and Development Program of China(Grant No.2017YFB0403002)the National Science Fund for Distinguished Young Scholars,China(Grant No.Y3CHC11001)the National Natural Science Foundation of China(Grant No.11604368)
文摘One-port surface acoustic wave resonators(SAWRs) are fabricated on semi-insulating high-quality bulk GaN and GaN film substrates, respectively. The semi-insulating GaN substrates are grown by hydride vapor phase epitaxy(HVPE)and doped with Fe. The anisotropy of Rayleigh propagation and the electromechanical coupling coefficient in Fe-doped GaN are investigated. The difference in resonance frequency between the SAWs between [1120] GaN and [1100] GaN is about 0.25% for the Rayleigh propagation mode, which is smaller than that of non-intentionally doped GaN film(~1%)reported in the literature. The electromechanical coupling coefficient of Fe-doped GaN is about 3.03%, which is higher than that of non-intentionally doped GaN film. The one-port SAWR fabricated on an 8-μm Fe-doped GaN/sapphire substrate has a quality factor of 2050, and that fabricated on Fe-doped bulk GaN has a quality factor as high as 3650. All of our results indicate that high-quality bulk GaN is a very promising material for application in SAW devices.
文摘A review concerning the methods of studying and describing wave groups is presented in this paper. After analysing 78 field records collected in the Shijiu Port, China, the measured parameters of wave groups and some factors describing wave groupness and their variations are given. Moreover, these results are compared with those of theory.
基金supported by the National Natural Science Foundation of China (50879085)the Program for New Century Excellent Talents in University(NCET-07-0778)Fundamental Research Funds for the Central Universities (2012QNA4020)
文摘This paper extends a prediction model for multi-directional random wave transformation based on an energy balance equation by Mase with the consideration of wave shoaling, refraction, diffraction, reflection and breaking. This numerical model is improved by 1) introducing Wen's frequency spectrum and Mitsuyasu's directional function, which are more suitable to the coastal area of China; 2) considering energy dissipation caused by bottom friction, which ensures more accurate results for large-scale and shallow water areas; 3) taking into account a non-linear dispersion relation. Predictions using the extended wave model are carried out to study the feasibility of constructing the Ai Hua yacht port in Qingdao, China, with a comparison between two port layouts in design. Wave fields inside the port for different incident wave directions, water levels and return periods are simulated, and then two kinds of parameters are calculated to evaluate the wave conditions for the two layouts. Analyses show that Layout I is better than Layout II. Calculation results also show that the harbor will be calm for different wave directions under the design water level. On the contrary, the wave conditions do not wholly meet the requirements of a yacht port for ship berthing under the extreme water level. For safety consideration, the elevation of the breakwater might need to be properly increased to prevent wave overtopping under such water level. The extended numerical simulation model may provide an effective approach to computing wave heights in a harbor.
文摘This paper introduces the calculating procedure of the offshore design waves for the Dayaowan port area of Dalian Port. Some suggestions are proposed about the conventional calculating methods with measured waves data.
文摘This paper presents a new implementation of a millimeter-wave heterodyne receiver based on six-port technology. The six-port model is implemented in Advanced Design System （ADS） using S-parameter measurements for realistic advanced simulation of a short-range 60 GHz wireless link. Millimeter-wave frequency conversion is performed using a six-port down-converter. The second frequency conversion is performed using conventional means because of low IF. A comparison between the proposed receiver and a conventional balanced millimeter-wave mixer shows that the proposed receiver improves conversion loss and I/Q phase stability over the local oscillator （LO） and RF power ranges. The results of demodulating a V-band quadrature phase-shift keying （QPSK） signal at a high data rate of 100 Mb/s-1 Gb/s are discussed. The results of a bit error rate （BER） and error vector magnitude （EVM） analysis prove that the proposed architecture can be successfully used for wireless link transmission up to 10 m.
文摘-The necessity of using irregular waves, especially multi- directional waves to conduct three-dimensional model tests for port engineering and the test method are described in this paper through an example of model test for a port. The test results show that a deep navigation channel has a large effect on the waves in front of the breakwater near the port entrance and on the wave condition in the port.
文摘Statistical analysis was done on simultaneous wave and wind using data recorded by discus-shape wave buoy. The area is located in the southern Caspian Sea near the Anzali Port. Recorded wave data were obtained through directional spectrum wave analysis. Recorded wind direction and wind speed were obtained through the related time series as well. For 12-month measurements（May 25 2007-2008）, statistical calculations were done to specify the value of nonlinear auto-correlation of wave and wind using the probability distribution function of wave characteristics and statistical analysis in various time periods. The paper also presents and analyzes the amount of wave energy for the area mentioned on the basis of available database. Analyses showed a suitable comparison between the amounts of wave energy in different seasons. As a result, the best period for the largest amount of wave energy was known. Results showed that in the research period, the mean wave and wind auto correlation were about three hours. Among the probability distribution functions, i.e Weibull, Normal, Lognormal and Rayleigh, ＂Weibull＂ had the best consistency with experimental distribution function shown in different diagrams for each season. Results also showed that the mean wave energy in the research period was about 49.88 k W/m and the maximum density of wave energy was found in February and March, 2010.
文摘Characteristics of a natural wave cannot be successfully described by only using wave frequency spectra. In the laboratory, natural wave conditions cannot be simulated exactly by a harbor sheltering experiment with irregular long-crested waves, especially since the results of diffraction tests with reflection source are often inaccurate. Only a small number of laboratories in the world have possessed a directional spectrum wave producer because of its complication and expension. This paper describes the experiment for multi-directional wave superposition of wave diffraction, with the conventional regular wave producer and one-direction irregular wave producer. The test results are of equal value with that from a directional spectra wave. This method is suitable for rational design of harbor engineering projects and can be adopted in future practice.
文摘In this paper, the diluting effect of surface waves on a buoyant plume has been measured using a Laser Induced Fluorescence (LIF) technique. The resulting time-averaged, full field concentration maps have allowed quantification of enhanced mixing due to surface waves as well as measurement of other plume parameters.
文摘This paper presents an analysis and validation by advanced system simulation of compact and low-cost six-port transceivers for future wireless local area networks （WLANs） operating at millimeter-wave frequencies. To obtain realistic simulation results, a six-port model based on the measurement results of a fabricated V-band hybrid coupler, the core component, is used. A frequency-division multiplexing scheme is used by introducing four quadrature phase-shift keying （QPSK） channels in the wireless communication link. The data rate achieved is about 4 Gbit/s. The operating frequency is in the 60-64 GHz unlicensed band. Bit error rate （BER） results are presented, and a comparison is made between single-carrier and multicarrier architectures. The proposed wireless system can be considered an efficient candidate for millimeter-wave communication systems operating at quasi-optical data rates.
