Mercury is a global pollutant due to its widespread use,emission,and long-range transport（Blum,2013;Pacyna et al.,2010）.It is considered a priority pollutant due to its neurological toxicity,persistence,and bioaccum...Mercury is a global pollutant due to its widespread use,emission,and long-range transport（Blum,2013;Pacyna et al.,2010）.It is considered a priority pollutant due to its neurological toxicity,persistence,and bioaccumulation（Pacyna et al.,2010;Sharma et al.,2015）.Mercury pollution can occur when products that contain mercury are improperly disposed of and mercury is released into the air,water,and soil（Zhang and Wong,2007）.An estimated 22%of the annual world usage of mercury is in electrical equipment such as batteries,thermometers,and discharge lamps,and electronic devices such as monitors and展开更多
Objective To evaluate the environmental quality of Guiyu, Guangdong impacted by the electronic waste recycling industry. Methods The surface water, ground water and sediment samples taken separately from two sites tha...Objective To evaluate the environmental quality of Guiyu, Guangdong impacted by the electronic waste recycling industry. Methods The surface water, ground water and sediment samples taken separately from two sites that recycle E-wastes and other rubbish relevant to the E-waste recycling, and an agricultural area, were analyzed, and the data were used to evaluate the impact of E-waste recycling on the environmental quality of Guiyu based on environmental quality standards in China. Results The concentrations of lead and iron in the surface water samples significantly different in the three locations. The maximum value of lead in the first site was 8 times higher than the threshold of environmental quality standards for surface water. The concentration of iron in polluted sample was 22 times that of the background sample. Manganese and iron also showed a significant difference in ground water samples between the three sites. The amount of iron was 22 times that of the threshold of the quality standard for ground water, and 120 times that of the background sample. Moreover, the results of all the eight heavy metals showed significant differences among the sediment samples. The concentrations of copper, cadmium, nickel, and lead in the polluted samples were above the median benchmarks of National Oceanic and Atmospheric Administration （NOAA）. The copper concentration of 2670 mg/kg was 10 times that of the median benchmark. Conclusion E-waste recycling has led to the severe pollution Guiyu.展开更多
In order to assess the potential health risks of Hg pollution, total mercury（T–Hg） and methyl mercury（Me Hg） concentrations were determined in air, dust, surface soil, crops, poultry,fish and human hair samples f...In order to assess the potential health risks of Hg pollution, total mercury（T–Hg） and methyl mercury（Me Hg） concentrations were determined in air, dust, surface soil, crops, poultry,fish and human hair samples from an electronic waste（e-waste） recycling area in Taizhou,China. High concentrations of T–Hg and Me Hg were found in these multiple matrices, and the mean concentration was 30.7 ng/m3 of T–Hg for atmosphere samples, 3.1 μg/g of T–Hg for soil, 37.6 μg/g of T–Hg for dust, 20.3 ng/g of Me Hg for rice and 178.1 ng/g of Me Hg for fish,suggesting that the e-waste recycling facility was a significant source of Hg. The inorganic Hg（I–Hg） levels（0.84 μg/g） in hair samples of e-waste workers were much higher than that in the reference samples. Pearson＇s correlation coefficients showed that strong positive correlations（p 〈 0.01） between hair I–Hg and time staying in industrial area（r = 0.81） and between Me Hg and fish consumption frequency（r = 0.91）, imply that workers were mainly exposed to Hg vapor through long-time inhalation of contaminated air and dust, while other population mainly exposed to Me Hg through high-frequency fish consumption. The estimated daily intakes of Hg showed that dietary intake was the major Hg exposure source,and Hg intakes from rice and fish were significantly higher than from any other foods. The estimated total daily intakes（TDIs） of Me Hg for both children（696.8 ng/（kg·day）） and adults（381.3 ng/（kg·day）） greatly exceeded the dietary reference dose（Rf D） of 230 ng/（kg·day）,implying greater health risk for humans from Hg exposures around e-waste recycling facilities.展开更多
To achieve a sustainable development in the electronic and electrical equipment(EEE) industry, it is necessary to protect the available natural resources.In addition, to satisfy the increasing demand on EEE, it is nec...To achieve a sustainable development in the electronic and electrical equipment(EEE) industry, it is necessary to protect the available natural resources.In addition, to satisfy the increasing demand on EEE, it is necessary to provide alternative sources of raw materials.In this paper, laptops were imported to Jordan in 2011 as an example to show the potential recovery of metals and precious metals from high grade waste electronic and electrical equipment by conducting a mass flow rate analysis using the STAN program.The results show that considerable amounts of gold, silver, cobalt, palladium,and copper could be recovered.This will reduce the amounts needed from primary natural resources and offset the CO2 emissions produced from mining the primary raw material resources.展开更多
A novel biosorbent was synthesized by grafting bisthiourea(BTU)on a silk sericin(SS)matrix.This biosorbent was denoted as BTU-SS and characterized by Fourier transform infrared spectroscopy(FTIR),zeta potential measur...A novel biosorbent was synthesized by grafting bisthiourea(BTU)on a silk sericin(SS)matrix.This biosorbent was denoted as BTU-SS and characterized by Fourier transform infrared spectroscopy(FTIR),zeta potential measurements,elemental analysis,and X-ray photoelectron spectroscopy(XPS).As revealed by the adsorption experiments,both BTU-SS and SS showed low affinity towards coexisting base metallic ions in Ag(I)-Cu(II)-Zn(II)-Ni(II)-Pb(II)electronic waste leachate mixtures,while their adsorption capacities towards Ag(I)reached 30.5 and 10.4 mg∙g-1 at a pH of 5.0,respectively.BTU-SS showed higher selectivity towards Ag(I)than SS,as revealed by the Ag(I)partition coefficients between the biosorbents and the leachate(16634.6 and 403.3,respectively).As further demonstrated by column experiments,BTU-SS allowed the separation of Ag(I)from an electronic waste leachate.Thermodynamic studies showed that the adsorption of Ag(I)was exothermic and spontaneous,while adsorption kinetic experiments revealed that chemisorption dominated the adsorption process with activation energies of 47.67 and 53.27 kJ∙mol-1 for BTU-SS and SS,respectively.FTIR and XPS analyses of fresh and Ag(I)-loaded BTU-SS further revealed an adsorption mechanism mainly involving electrostatic and coordination interactions.展开更多
The reports about soil environmental contamination from heavy metals in electronic wastes were reviewed. The production, sources and disposition of electronic wastes were introduced. The negative impacts of electronic...The reports about soil environmental contamination from heavy metals in electronic wastes were reviewed. The production, sources and disposition of electronic wastes were introduced. The negative impacts of electronic wastes on the environment were analyzed, and soil pollution from electronic wastes in several typical districts were discussed and summarized.展开更多
In order to assess heavy metals pollution in agricultural soil after renovation in typical e-waste recycling areas, 212 soil samples were col- lected and the mass fractions of 7 kinds of heavy metals （Cd, Cr, Cu, Hg,...In order to assess heavy metals pollution in agricultural soil after renovation in typical e-waste recycling areas, 212 soil samples were col- lected and the mass fractions of 7 kinds of heavy metals （Cd, Cr, Cu, Hg, Ni, Pb and Zn） were analyzed. The results indicated that heavy metals pollution in agricultural soil was commonly existed in the study areas, and the soil was slightly contaminated by Pb but was moderately or critically polluted by Cd and Cu. However, the carcinogenic risk and non-carcinogenic risk status by heavy metals pollution were beyond acceptable levels, and soil remediation was quite necessary. After some investigations of bioremediation, we found that saponin as washing agent could highly strenqthen the behavior of heavy metals desorption from soil ,which had a good prospect of engineering practice.展开更多
Recently, the demand for REEs （rare earth elements） has been heavily increasing, as they are used in many high-tech products （e.g., because of their specific magnetic behavior）. As a result, the supply situation f...Recently, the demand for REEs （rare earth elements） has been heavily increasing, as they are used in many high-tech products （e.g., because of their specific magnetic behavior）. As a result, the supply situation for REEs is worsening and the world market is depending on Chinese exports, so that it may be worthwhile to recycle e-waste （electronic waste） in European countries. This article describes an analytical method to analyze REEs in different kinds of e-waste with the help of a simultaneous ICP-OES （ICP optical emission spectrometer）. The task is challenging because samples show significant differences in terms of major, minor and trace element concentrations. Depending on the field of application, the level of matrix elements and target elements differs completely, resulting in a wide variety of spectral interferences. The method presented in this article allows an accurate quantification of REEs as well as a high sample throughput. In addition to REEs, other elements of economic interest can be determined in the same way. The development of a sample preparation process is another important issue and considered as well.展开更多
In this study, the metal coordination ability of alpha-cyclodextrin (α-CD) was employed to complex gold and thus isolate and extract it from different matrices of acid-digests of electronic waste and soil. The crude ...In this study, the metal coordination ability of alpha-cyclodextrin (α-CD) was employed to complex gold and thus isolate and extract it from different matrices of acid-digests of electronic waste and soil. The crude α-CD used was extracted from cassava and yam starch of the non-edible plant species using E. coli α-cyclodextrin glucanotransferase (α-CGTase), with yields ≥ 62%. The reaction was monitored progressively by ultraviolet-visible spectroscopy and checked with infrared spectroscopy (IR) for the presence of α-CD. The crude α-CD extract without need for purification was refluxed with gold containing-electronic waste and soil predigested in a mixture of NaBr/HNO<sub>3</sub> for 4 - 7 days. Recoveries of up to 22.9% and 70.8% gold were achieved from electronic waste and soil, respectively using 0.1 M α-CD. This approach is cheap, effective, and environmentally benign.展开更多
The innovation of technologzv and the improvement of people＇s living standard accelerate the replacement of consumer electronic appliances, resulting in a significant increase of waste household electronic appliances...The innovation of technologzv and the improvement of people＇s living standard accelerate the replacement of consumer electronic appliances, resulting in a significant increase of waste household electronic appliances （WHEA）. To address the environmental problems of WHEA, many countries have enacted legislation according to WHEA management, including collecting, processing and recycling. The regulations on the management of WHEA were also drafted in China and pilot programs of WHEA recycling management encountered difficulties in collecting WHEA. The success of a recycling scheme is dependent on people＇s willingness of participating in the scheme, This paper applies Ajzen＇s theory of planned behavior to seek the main factors to engourage consumers to participate in WHEA recycling management in China. Data from a survey conducted with a sample of 633 consumers show that service motivation is the first predictor of participation behavior intention, followed by environmental behavior attitude, economic motivation, subjective norm. and perceived behavior barrier. Environmental knowledge is found not to be the predictor of behavior intention in this recycling scheme. Study results also suggest that publicity is the key situational factor in the WHEA recycling management. Recycling network and policy have little influence on changing consumers＇ current behavior intention and participation. Implications of the findings are discussed and future research directions are suggested in the end.展开更多
This study assessed the usefulness of the replacement of coarse aggregate partially with electronic waste(e-waste)plastic in lightweight concrete since developing countries have been challenged with management of e-wa...This study assessed the usefulness of the replacement of coarse aggregate partially with electronic waste(e-waste)plastic in lightweight concrete since developing countries have been challenged with management of e-waste as well as high cost of coarse aggregates for concrete production.Coarse aggregates were replaced with e-waste plastic in concrete at 5%,10%,15%,and 20% for a concrete class of C20.The particle size distribution of the e-waste plastic aggregates was determined as well as the slump,compressive strength,water absorption and bulk density of the concrete.Generally,the slump decreased as the e-waste increased.The compressive strengths decreased for the 5%and 10%replacement of coarse aggregates with e-waste but increased for the 15% and 20% replacement of coarse aggregate with e-waste.0% water absorption was obtained for the 15% and 20% e-waste content while the 10%e-waste concrete obtained 0.01% and the 5% e-waste obtaining of 0.013% after 28days of curing.The densities of 5%,10%,15% and 20% e-waste plastic content decreased as compared to the 0% e-waste plastic content.The values of compressive strength obtained showed that coarse aggregate replacements by e-waste plastic at 15% and 20% may be appropriate for lightweight concrete of class C20/25 since compressive strengths ranged between 16.09 Nmm^(-2) and 22.87 Nmm^(-2).This implies that partial replacement of coarse aggregate with e-waste plastic may be useful for lightweight concrete as well as helping in eradicating the environment of the menace of e-waste plastic.展开更多
The waste derived from Electrical and Electronic Equipment (WEEE) is of interest now worldwide, in some countries due to the rapid technological development and in others due to technological dependence through the ac...The waste derived from Electrical and Electronic Equipment (WEEE) is of interest now worldwide, in some countries due to the rapid technological development and in others due to technological dependence through the acquisition of second hand equipment. Therefore it is necessary to implement strategies for the sustainable management of electrical and electronic equipment at the end of its useful life. This paper presents the results of an investigation that was conducted in a city located in the Northwest of Mexico, which seeks to understand the management practices of household WEEE generators. A survey was applied to a representative sample of the population with a confidence level of 90%. Six home appliances were quantified and it was found that approximately 21% of them are disposed directly as part of the household flow of Municipal Solid Waste (MSW), while 79% are storage for a latter sale, repair or reuse. The results obtained support the need to develop evaluations and to implement possible scenarios for the sustainable management of Electrical and Electronic Waste.展开更多
This recycling of printed circuit board (TCI) for the production of metals, given the environmental degradation that can cause toxic substances of these, is the reuse of valuable materials recovered from the TCI, this...This recycling of printed circuit board (TCI) for the production of metals, given the environmental degradation that can cause toxic substances of these, is the reuse of valuable materials recovered from the TCI, this being an economic engine that promotes the recycling of this waste. This paper presents a methodology for evaluating the reaction kinetics and leaching of metals that form the metal substrate, which have environmental and energy advantages, so the generation of new recovery techniques metals from the TCI low environmental and energy impact is increasingly necessary, for it is essential to establish the parameters affecting the reaction rate and identify design alternatives to determine whether or not sustainable, economically viable and that does not pollute. The method adopted was a leaching acid samples, where the full factorial method employed two experimental levels to evaluate the influence of: leaching time, temperature of the aqueous leach solution, reaction kinetics and solid/liquid, on the percentage of metal extraction. Subsequently, the metals are obtained by calcining and smelting the resulting salts by addition of acid liquor.展开更多
Given the challenge of estimating or calculating quantities of waste electrical and electronic equipment(WEEE)in developing countries,this article focuses on predicting the WEEE generated by Cameroonian small and medi...Given the challenge of estimating or calculating quantities of waste electrical and electronic equipment(WEEE)in developing countries,this article focuses on predicting the WEEE generated by Cameroonian small and medium enterprises(SMEs)that are engaged in ISO 14001:2015 initiatives and consume electrical and electronic equipment(EEE)to enhance their performance and profitability.The methodology employed an exploratory approach involving the application of general equilibrium theory(GET)to contextualize the study and generate relevant parameters for deploying the random forest regression learning algorithm for predictions.Machine learning was applied to 80%of the samples for training,while simulation was conducted on the remaining 20%of samples based on quantities of EEE utilized over a specific period,utilization rates,repair rates,and average lifespans.The results demonstrate that the model’s predicted values are significantly close to the actual quantities of generated WEEE,and the model’s performance was evaluated using the mean squared error(MSE)and yielding satisfactory results.Based on this model,both companies and stakeholders can set realistic objectives for managing companies’WEEE,fostering sustainable socio-environmental practices.展开更多
According to the International energy Agency(IEA),a standard AI-oriented data center consumes as much electricity as 100,000 households.Data centers also use enormous amounts of water to build and cool electrical comp...According to the International energy Agency(IEA),a standard AI-oriented data center consumes as much electricity as 100,000 households.Data centers also use enormous amounts of water to build and cool electrical components and they also create a lot of electronic waste.展开更多
Cyanide is the most widely used reagent in gold production processes. However, cyanide is highly toxic and poses safety haz-ards during transportation and use. Therefore, it is necessary to develop gold leaching reage...Cyanide is the most widely used reagent in gold production processes. However, cyanide is highly toxic and poses safety haz-ards during transportation and use. Therefore, it is necessary to develop gold leaching reagents that can replace cyanide. This paper intro-duces a method for synthesizing a gold leaching reagent. Sodium cyanate is used as the main raw material, with sodium hydroxide and so-dium ferrocyanide used as additives. The gold leaching reagent can be obtained under the conditions of a mass ratio of sodium cyanate,sodium hydroxide, and sodium ferrocyanide of 15:3:1, synthesis temperature of 600℃, and synthesis time of 1 h. This reagent has a goodrecovery effect on gold concentrate and gold-containing electronic waste. The gold leaching rate of roasted desulfurized gold concentratecan reach 87.56%. For the extraction experiments of three types of gold-containing electronic waste, the gold leaching rate can reach over90% after 2 h. Furthermore, the reagent exhibits good selectivity towards gold. Component analysis indicates that the effective compon-ent in the reagent could be sodium isocyanate.展开更多
IBC Advanced Technologies' Molecular Recognition Technology(MRT) products,trade named SuperLig,selectively and rapidly bind with target metal ions to remove them from solution.The MRT process can produce a high pu...IBC Advanced Technologies' Molecular Recognition Technology(MRT) products,trade named SuperLig,selectively and rapidly bind with target metal ions to remove them from solution.The MRT process can produce a high purity separation product of maximum added value at low cost.In this paper,applications of MRT in the precious metals industry,including selective commercial separations involving Au,Pd,Pt,Rh,and Ru,are described and discussed.Application of MRT to the analytical determination of precious metals is presented.Potential use of MRT in recovering precious metals from end-of-life(EOL) products is discussed.展开更多
Accelerated industrialization and urbanization,and unregulated disposal of waste of electric and electronic equipment（e-waste） in China have caused environmental pollution of brominated flame retardants（BFRs）.This...Accelerated industrialization and urbanization,and unregulated disposal of waste of electric and electronic equipment（e-waste） in China have caused environmental pollution of brominated flame retardants（BFRs）.This review summarized the levels,trends,and bioaccumulation characteristics of polybrominated diphenyl ethers（PBDEs） and other potential alternative BFRs including hexabromocyclododecanes（HBCDs）,1,2-bis（2,4,6-dibromophenoxy） ethane（BTBPE） and decabromodiphenylethane（DBDPE） in wildlife from China.PBDE levels in wildlife from China were generally higher than those from other parts in Asia,and were comparable to those from Europe but were lower than those from North America.However,wildlife from the e-waste recycling sites in South China and East China contained much higher PBDEs compared to other reports around the world,suggesting the heavy contamination of PBDEs in these regions.The alternative BFRs were also detected in wildlife,revealing that the animals are exposed to these chemicals,in addition to PBDEs.Temporal trends indicated by levels in marine mammals from South China suggested that PBDE levels increased from the beginning of 1990s to 2000s,but decreased from the middle of 2000s,followed by relatively steady levels.In contrast,HBCDs were found to be continuously increasing from 1997 to 2007,indicating the increasing usage of HBCDs in China in recent years.Compared to PBDE profiles found in other parts,aquatic species and birds from China contained relatively higher contributions of BDE28 and 209,respectively,suggesting the possible different usage pattern of PBDEs.Future works including keeping monitoring at a reasonable scale and frequency to make sure levels near urban centers indicative of population do not increase are needed.Additionally,focus effort on e-waste recycling regions to look for impacts and to determine if regulation/controls are resulting in lower environmental contamination,and incorporation of sentinel species in monitoring efforts are recommended.展开更多
A comparison of three hydrometallurgical methods for selective recovery of copper from low-grade electric and electronic wastes was reported. Scraps were smelted to produce Cu？Zn？Sn？Ag alloy. Multiphase material wa...A comparison of three hydrometallurgical methods for selective recovery of copper from low-grade electric and electronic wastes was reported. Scraps were smelted to produce Cu？Zn？Sn？Ag alloy. Multiphase material was analyzed by SEM？EDS and XRD. The alloy was dissolved anodically with simultaneous metal electrodeposition using ammoniacal and sulfuric acid solutions or leached in ammonia？ammonium sulfate solution and then copper electrowinning was carried out. This resulted in the separation of metals, where lead, silver and tin accumulated mainly in the slimes, while copper was transferred to the electrolyte and then recovered on the cathode. The best conditions of the alloy treatment were obtained in the sulfuric acid, where the final product was metal of high purity （99% Cu） at the current efficiency of 90%. Ammoniacal leaching of the alloy led to the accumulation of copper ions in the electrolyte and further metal electrowinning, but the rate of the spontaneous dissolution was low. Anodic dissolution of the alloy in the ammonia？ammonium sulfate solution led to the unfavorable distribution of metals among the slime, electrolyte and cathodic deposit.展开更多
基金Alberta Health,Alberta Innovates,the Canada Research Chairs Programthe Canadian Institutes of Health Researchthe Natural Sciences and Engineering Research Council of Canada for their support
文摘Mercury is a global pollutant due to its widespread use,emission,and long-range transport（Blum,2013;Pacyna et al.,2010）.It is considered a priority pollutant due to its neurological toxicity,persistence,and bioaccumulation（Pacyna et al.,2010;Sharma et al.,2015）.Mercury pollution can occur when products that contain mercury are improperly disposed of and mercury is released into the air,water,and soil（Zhang and Wong,2007）.An estimated 22%of the annual world usage of mercury is in electrical equipment such as batteries,thermometers,and discharge lamps,and electronic devices such as monitors and
文摘Objective To evaluate the environmental quality of Guiyu, Guangdong impacted by the electronic waste recycling industry. Methods The surface water, ground water and sediment samples taken separately from two sites that recycle E-wastes and other rubbish relevant to the E-waste recycling, and an agricultural area, were analyzed, and the data were used to evaluate the impact of E-waste recycling on the environmental quality of Guiyu based on environmental quality standards in China. Results The concentrations of lead and iron in the surface water samples significantly different in the three locations. The maximum value of lead in the first site was 8 times higher than the threshold of environmental quality standards for surface water. The concentration of iron in polluted sample was 22 times that of the background sample. Manganese and iron also showed a significant difference in ground water samples between the three sites. The amount of iron was 22 times that of the threshold of the quality standard for ground water, and 120 times that of the background sample. Moreover, the results of all the eight heavy metals showed significant differences among the sediment samples. The concentrations of copper, cadmium, nickel, and lead in the polluted samples were above the median benchmarks of National Oceanic and Atmospheric Administration （NOAA）. The copper concentration of 2670 mg/kg was 10 times that of the median benchmark. Conclusion E-waste recycling has led to the severe pollution Guiyu.
基金financially supported by the National Natural Science Foundation of China (No.21177087)Chinese Ministry of Science and Technology 973 Project (2013CB430005)
文摘In order to assess the potential health risks of Hg pollution, total mercury（T–Hg） and methyl mercury（Me Hg） concentrations were determined in air, dust, surface soil, crops, poultry,fish and human hair samples from an electronic waste（e-waste） recycling area in Taizhou,China. High concentrations of T–Hg and Me Hg were found in these multiple matrices, and the mean concentration was 30.7 ng/m3 of T–Hg for atmosphere samples, 3.1 μg/g of T–Hg for soil, 37.6 μg/g of T–Hg for dust, 20.3 ng/g of Me Hg for rice and 178.1 ng/g of Me Hg for fish,suggesting that the e-waste recycling facility was a significant source of Hg. The inorganic Hg（I–Hg） levels（0.84 μg/g） in hair samples of e-waste workers were much higher than that in the reference samples. Pearson＇s correlation coefficients showed that strong positive correlations（p 〈 0.01） between hair I–Hg and time staying in industrial area（r = 0.81） and between Me Hg and fish consumption frequency（r = 0.91）, imply that workers were mainly exposed to Hg vapor through long-time inhalation of contaminated air and dust, while other population mainly exposed to Me Hg through high-frequency fish consumption. The estimated daily intakes of Hg showed that dietary intake was the major Hg exposure source,and Hg intakes from rice and fish were significantly higher than from any other foods. The estimated total daily intakes（TDIs） of Me Hg for both children（696.8 ng/（kg·day）） and adults（381.3 ng/（kg·day）） greatly exceeded the dietary reference dose（Rf D） of 230 ng/（kg·day）,implying greater health risk for humans from Hg exposures around e-waste recycling facilities.
文摘To achieve a sustainable development in the electronic and electrical equipment(EEE) industry, it is necessary to protect the available natural resources.In addition, to satisfy the increasing demand on EEE, it is necessary to provide alternative sources of raw materials.In this paper, laptops were imported to Jordan in 2011 as an example to show the potential recovery of metals and precious metals from high grade waste electronic and electrical equipment by conducting a mass flow rate analysis using the STAN program.The results show that considerable amounts of gold, silver, cobalt, palladium,and copper could be recovered.This will reduce the amounts needed from primary natural resources and offset the CO2 emissions produced from mining the primary raw material resources.
基金This work was supported by the Natural Science Foundation of Education Department of Shaanxi Provincial Government(2013JK0873).
文摘A novel biosorbent was synthesized by grafting bisthiourea(BTU)on a silk sericin(SS)matrix.This biosorbent was denoted as BTU-SS and characterized by Fourier transform infrared spectroscopy(FTIR),zeta potential measurements,elemental analysis,and X-ray photoelectron spectroscopy(XPS).As revealed by the adsorption experiments,both BTU-SS and SS showed low affinity towards coexisting base metallic ions in Ag(I)-Cu(II)-Zn(II)-Ni(II)-Pb(II)electronic waste leachate mixtures,while their adsorption capacities towards Ag(I)reached 30.5 and 10.4 mg∙g-1 at a pH of 5.0,respectively.BTU-SS showed higher selectivity towards Ag(I)than SS,as revealed by the Ag(I)partition coefficients between the biosorbents and the leachate(16634.6 and 403.3,respectively).As further demonstrated by column experiments,BTU-SS allowed the separation of Ag(I)from an electronic waste leachate.Thermodynamic studies showed that the adsorption of Ag(I)was exothermic and spontaneous,while adsorption kinetic experiments revealed that chemisorption dominated the adsorption process with activation energies of 47.67 and 53.27 kJ∙mol-1 for BTU-SS and SS,respectively.FTIR and XPS analyses of fresh and Ag(I)-loaded BTU-SS further revealed an adsorption mechanism mainly involving electrostatic and coordination interactions.
基金Supported by the Science and Technology Project of Shantou City([2013]90)Science and Technology Project of Guangdong Province(2013B020700007)
文摘The reports about soil environmental contamination from heavy metals in electronic wastes were reviewed. The production, sources and disposition of electronic wastes were introduced. The negative impacts of electronic wastes on the environment were analyzed, and soil pollution from electronic wastes in several typical districts were discussed and summarized.
基金Supported by Environmental Protection Technology Program in Zhejiang Province,China(2013B017)Taizhou Municipal Science and Technology Project,China(121ky07)
文摘In order to assess heavy metals pollution in agricultural soil after renovation in typical e-waste recycling areas, 212 soil samples were col- lected and the mass fractions of 7 kinds of heavy metals （Cd, Cr, Cu, Hg, Ni, Pb and Zn） were analyzed. The results indicated that heavy metals pollution in agricultural soil was commonly existed in the study areas, and the soil was slightly contaminated by Pb but was moderately or critically polluted by Cd and Cu. However, the carcinogenic risk and non-carcinogenic risk status by heavy metals pollution were beyond acceptable levels, and soil remediation was quite necessary. After some investigations of bioremediation, we found that saponin as washing agent could highly strenqthen the behavior of heavy metals desorption from soil ,which had a good prospect of engineering practice.
文摘Recently, the demand for REEs （rare earth elements） has been heavily increasing, as they are used in many high-tech products （e.g., because of their specific magnetic behavior）. As a result, the supply situation for REEs is worsening and the world market is depending on Chinese exports, so that it may be worthwhile to recycle e-waste （electronic waste） in European countries. This article describes an analytical method to analyze REEs in different kinds of e-waste with the help of a simultaneous ICP-OES （ICP optical emission spectrometer）. The task is challenging because samples show significant differences in terms of major, minor and trace element concentrations. Depending on the field of application, the level of matrix elements and target elements differs completely, resulting in a wide variety of spectral interferences. The method presented in this article allows an accurate quantification of REEs as well as a high sample throughput. In addition to REEs, other elements of economic interest can be determined in the same way. The development of a sample preparation process is another important issue and considered as well.
文摘In this study, the metal coordination ability of alpha-cyclodextrin (α-CD) was employed to complex gold and thus isolate and extract it from different matrices of acid-digests of electronic waste and soil. The crude α-CD used was extracted from cassava and yam starch of the non-edible plant species using E. coli α-cyclodextrin glucanotransferase (α-CGTase), with yields ≥ 62%. The reaction was monitored progressively by ultraviolet-visible spectroscopy and checked with infrared spectroscopy (IR) for the presence of α-CD. The crude α-CD extract without need for purification was refluxed with gold containing-electronic waste and soil predigested in a mixture of NaBr/HNO<sub>3</sub> for 4 - 7 days. Recoveries of up to 22.9% and 70.8% gold were achieved from electronic waste and soil, respectively using 0.1 M α-CD. This approach is cheap, effective, and environmentally benign.
文摘The innovation of technologzv and the improvement of people＇s living standard accelerate the replacement of consumer electronic appliances, resulting in a significant increase of waste household electronic appliances （WHEA）. To address the environmental problems of WHEA, many countries have enacted legislation according to WHEA management, including collecting, processing and recycling. The regulations on the management of WHEA were also drafted in China and pilot programs of WHEA recycling management encountered difficulties in collecting WHEA. The success of a recycling scheme is dependent on people＇s willingness of participating in the scheme, This paper applies Ajzen＇s theory of planned behavior to seek the main factors to engourage consumers to participate in WHEA recycling management in China. Data from a survey conducted with a sample of 633 consumers show that service motivation is the first predictor of participation behavior intention, followed by environmental behavior attitude, economic motivation, subjective norm. and perceived behavior barrier. Environmental knowledge is found not to be the predictor of behavior intention in this recycling scheme. Study results also suggest that publicity is the key situational factor in the WHEA recycling management. Recycling network and policy have little influence on changing consumers＇ current behavior intention and participation. Implications of the findings are discussed and future research directions are suggested in the end.
文摘This study assessed the usefulness of the replacement of coarse aggregate partially with electronic waste(e-waste)plastic in lightweight concrete since developing countries have been challenged with management of e-waste as well as high cost of coarse aggregates for concrete production.Coarse aggregates were replaced with e-waste plastic in concrete at 5%,10%,15%,and 20% for a concrete class of C20.The particle size distribution of the e-waste plastic aggregates was determined as well as the slump,compressive strength,water absorption and bulk density of the concrete.Generally,the slump decreased as the e-waste increased.The compressive strengths decreased for the 5%and 10%replacement of coarse aggregates with e-waste but increased for the 15% and 20% replacement of coarse aggregate with e-waste.0% water absorption was obtained for the 15% and 20% e-waste content while the 10%e-waste concrete obtained 0.01% and the 5% e-waste obtaining of 0.013% after 28days of curing.The densities of 5%,10%,15% and 20% e-waste plastic content decreased as compared to the 0% e-waste plastic content.The values of compressive strength obtained showed that coarse aggregate replacements by e-waste plastic at 15% and 20% may be appropriate for lightweight concrete of class C20/25 since compressive strengths ranged between 16.09 Nmm^(-2) and 22.87 Nmm^(-2).This implies that partial replacement of coarse aggregate with e-waste plastic may be useful for lightweight concrete as well as helping in eradicating the environment of the menace of e-waste plastic.
文摘The waste derived from Electrical and Electronic Equipment (WEEE) is of interest now worldwide, in some countries due to the rapid technological development and in others due to technological dependence through the acquisition of second hand equipment. Therefore it is necessary to implement strategies for the sustainable management of electrical and electronic equipment at the end of its useful life. This paper presents the results of an investigation that was conducted in a city located in the Northwest of Mexico, which seeks to understand the management practices of household WEEE generators. A survey was applied to a representative sample of the population with a confidence level of 90%. Six home appliances were quantified and it was found that approximately 21% of them are disposed directly as part of the household flow of Municipal Solid Waste (MSW), while 79% are storage for a latter sale, repair or reuse. The results obtained support the need to develop evaluations and to implement possible scenarios for the sustainable management of Electrical and Electronic Waste.
文摘This recycling of printed circuit board (TCI) for the production of metals, given the environmental degradation that can cause toxic substances of these, is the reuse of valuable materials recovered from the TCI, this being an economic engine that promotes the recycling of this waste. This paper presents a methodology for evaluating the reaction kinetics and leaching of metals that form the metal substrate, which have environmental and energy advantages, so the generation of new recovery techniques metals from the TCI low environmental and energy impact is increasingly necessary, for it is essential to establish the parameters affecting the reaction rate and identify design alternatives to determine whether or not sustainable, economically viable and that does not pollute. The method adopted was a leaching acid samples, where the full factorial method employed two experimental levels to evaluate the influence of: leaching time, temperature of the aqueous leach solution, reaction kinetics and solid/liquid, on the percentage of metal extraction. Subsequently, the metals are obtained by calcining and smelting the resulting salts by addition of acid liquor.
文摘Given the challenge of estimating or calculating quantities of waste electrical and electronic equipment(WEEE)in developing countries,this article focuses on predicting the WEEE generated by Cameroonian small and medium enterprises(SMEs)that are engaged in ISO 14001:2015 initiatives and consume electrical and electronic equipment(EEE)to enhance their performance and profitability.The methodology employed an exploratory approach involving the application of general equilibrium theory(GET)to contextualize the study and generate relevant parameters for deploying the random forest regression learning algorithm for predictions.Machine learning was applied to 80%of the samples for training,while simulation was conducted on the remaining 20%of samples based on quantities of EEE utilized over a specific period,utilization rates,repair rates,and average lifespans.The results demonstrate that the model’s predicted values are significantly close to the actual quantities of generated WEEE,and the model’s performance was evaluated using the mean squared error(MSE)and yielding satisfactory results.Based on this model,both companies and stakeholders can set realistic objectives for managing companies’WEEE,fostering sustainable socio-environmental practices.
文摘According to the International energy Agency(IEA),a standard AI-oriented data center consumes as much electricity as 100,000 households.Data centers also use enormous amounts of water to build and cool electrical components and they also create a lot of electronic waste.
基金financially supported by the National Natural Science Foundation of China (No.51974016)。
文摘Cyanide is the most widely used reagent in gold production processes. However, cyanide is highly toxic and poses safety haz-ards during transportation and use. Therefore, it is necessary to develop gold leaching reagents that can replace cyanide. This paper intro-duces a method for synthesizing a gold leaching reagent. Sodium cyanate is used as the main raw material, with sodium hydroxide and so-dium ferrocyanide used as additives. The gold leaching reagent can be obtained under the conditions of a mass ratio of sodium cyanate,sodium hydroxide, and sodium ferrocyanide of 15:3:1, synthesis temperature of 600℃, and synthesis time of 1 h. This reagent has a goodrecovery effect on gold concentrate and gold-containing electronic waste. The gold leaching rate of roasted desulfurized gold concentratecan reach 87.56%. For the extraction experiments of three types of gold-containing electronic waste, the gold leaching rate can reach over90% after 2 h. Furthermore, the reagent exhibits good selectivity towards gold. Component analysis indicates that the effective compon-ent in the reagent could be sodium isocyanate.
文摘IBC Advanced Technologies' Molecular Recognition Technology(MRT) products,trade named SuperLig,selectively and rapidly bind with target metal ions to remove them from solution.The MRT process can produce a high purity separation product of maximum added value at low cost.In this paper,applications of MRT in the precious metals industry,including selective commercial separations involving Au,Pd,Pt,Rh,and Ru,are described and discussed.Application of MRT to the analytical determination of precious metals is presented.Potential use of MRT in recovering precious metals from end-of-life(EOL) products is discussed.
基金supported by the National Natural Science Foundation of China (No. 41103054,40821003,41073081)the Earmarked Fund of the State Key Laboratory of Organic Geochemistry (No. OGL-200905)
文摘Accelerated industrialization and urbanization,and unregulated disposal of waste of electric and electronic equipment（e-waste） in China have caused environmental pollution of brominated flame retardants（BFRs）.This review summarized the levels,trends,and bioaccumulation characteristics of polybrominated diphenyl ethers（PBDEs） and other potential alternative BFRs including hexabromocyclododecanes（HBCDs）,1,2-bis（2,4,6-dibromophenoxy） ethane（BTBPE） and decabromodiphenylethane（DBDPE） in wildlife from China.PBDE levels in wildlife from China were generally higher than those from other parts in Asia,and were comparable to those from Europe but were lower than those from North America.However,wildlife from the e-waste recycling sites in South China and East China contained much higher PBDEs compared to other reports around the world,suggesting the heavy contamination of PBDEs in these regions.The alternative BFRs were also detected in wildlife,revealing that the animals are exposed to these chemicals,in addition to PBDEs.Temporal trends indicated by levels in marine mammals from South China suggested that PBDE levels increased from the beginning of 1990s to 2000s,but decreased from the middle of 2000s,followed by relatively steady levels.In contrast,HBCDs were found to be continuously increasing from 1997 to 2007,indicating the increasing usage of HBCDs in China in recent years.Compared to PBDE profiles found in other parts,aquatic species and birds from China contained relatively higher contributions of BDE28 and 209,respectively,suggesting the possible different usage pattern of PBDEs.Future works including keeping monitoring at a reasonable scale and frequency to make sure levels near urban centers indicative of population do not increase are needed.Additionally,focus effort on e-waste recycling regions to look for impacts and to determine if regulation/controls are resulting in lower environmental contamination,and incorporation of sentinel species in monitoring efforts are recommended.
基金Project(NNOTECH-2/IN2/18/181960/NCBR)supported by the National Centre for Research and Development,Poland
文摘A comparison of three hydrometallurgical methods for selective recovery of copper from low-grade electric and electronic wastes was reported. Scraps were smelted to produce Cu？Zn？Sn？Ag alloy. Multiphase material was analyzed by SEM？EDS and XRD. The alloy was dissolved anodically with simultaneous metal electrodeposition using ammoniacal and sulfuric acid solutions or leached in ammonia？ammonium sulfate solution and then copper electrowinning was carried out. This resulted in the separation of metals, where lead, silver and tin accumulated mainly in the slimes, while copper was transferred to the electrolyte and then recovered on the cathode. The best conditions of the alloy treatment were obtained in the sulfuric acid, where the final product was metal of high purity （99% Cu） at the current efficiency of 90%. Ammoniacal leaching of the alloy led to the accumulation of copper ions in the electrolyte and further metal electrowinning, but the rate of the spontaneous dissolution was low. Anodic dissolution of the alloy in the ammonia？ammonium sulfate solution led to the unfavorable distribution of metals among the slime, electrolyte and cathodic deposit.
