期刊文献+
共找到282篇文章
< 1 2 15 >
每页显示 20 50 100
Numerical analysis on the influence of vortex motion in a reverse Stairmand cyclone separator by using LES model 被引量:2
1
作者 Zhu-Wei Gao Zhong-Xin Liu +4 位作者 Yao-Dong Wei Cheng-Xin Li Shi-Hao Wang Xin-Yu Qi Wei Huang 《Petroleum Science》 SCIE CAS CSCD 2022年第2期848-860,共13页
This study aims to analyze the influence of vortex motion in a reverse Stairmand cyclone separator by using LES model.The mathematical analysis indicated that the energy dissipation and the flow characteristics of inc... This study aims to analyze the influence of vortex motion in a reverse Stairmand cyclone separator by using LES model.The mathematical analysis indicated that the energy dissipation and the flow characteristics of incompressible fluid are directly related to on the vortex motion.The results of the Q criterion-based iso-vortex surface could well reflect the tendency of the vortex structure,in which the iso-vortex surface exhibited a distorted distribution rather than around the center axis.At the turning point of velocity vector,vortices were formed and developed,and the point was the center of the local vortex core.In addition,the vortex formed an irregular annular region around the wall at the bottom of vortex finder.The vortex structure near the dust hopper presented a strong distortion.Moreover,there were two rotating flow in the opposite direction within the dust hopper.These phenomena would affect the separation performance,which was significance to cyclone separator. 展开更多
关键词 Numerical simulation Cyclone separator Mathematical analysis vortex motion Local analysis
原文传递
A NUMERICAL STUDY OF THE VORTEX MOTION IN OSCILLATING FLOW AROUND A CIRCULAR CYLINDER AT LOW AND MIDDLE Kc NUMBERS 被引量:1
2
作者 凌国平 凌国灿 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 1994年第3期212-219,共8页
A new hybrid model, which is based on domain decomposition and proposed by the authors is used for calculating the flow around a circular cylinder at low and middle Keulegan-Carpenter numbers (Kc=2~18)respectively.Th... A new hybrid model, which is based on domain decomposition and proposed by the authors is used for calculating the flow around a circular cylinder at low and middle Keulegan-Carpenter numbers (Kc=2~18)respectively.The vortex motion patterns in asymmetric regime,single pair(or transverse)regime and double pair(or diagonal)regime are successfully simulated.The calculated drag and inertial force coefficients are in better agreement with experimental data than other recent computational results. 展开更多
关键词 oscillating flow separated flow vortex motion domain decomposition hybrid method finite difference method vortex method
在线阅读 下载PDF
Role of grain boundary networks in vortex motion in superconducting films 被引量:1
3
作者 刘宇 薛峰 苟晓凡 《Chinese Physics B》 SCIE EI CAS CSCD 2023年第12期528-533,共6页
We study the vortex dynamics of the polycrystalline superconductors in the presence of both random point defects and the generated grain boundary(GB) networks with Voronoi diagram. The synergistic effect of adjacent G... We study the vortex dynamics of the polycrystalline superconductors in the presence of both random point defects and the generated grain boundary(GB) networks with Voronoi diagram. The synergistic effect of adjacent GBs on restricting the vortex motion in intragranular region is proposed and the corresponding intensity factor of the synergistic effect which characterizes the strength of the synergistic restriction of adjacent grain boundaries is also determined in the present work.The interconnected GBs offer easy-flow channels for vortices in addition to pinning effects on the vortices. The combined channels and the vortex flow patterns in the superconducting film are analyzed in detail from molecular dynamics simulations. Furthermore, it is discovered that the critical current increases with the decrease of magnetic field intensity,temperature, and the average grain size. The large number of vortices results in the enhanced repulsive interaction forcing the vortices to move out from the GBs. The thermal depinning from GBs leads to the lower Lorentz force range. The increase of the grain size causes the number of GBs to decrease. In summary, these effects leads the critical current to become a decreasing function of magnetic field, temperature, and grain size. 展开更多
关键词 grain boundary network Voronoi tessellation synergistic effect intensity factor of synergistic effect vortex motion combined channels
原文传递
Barrier or easy-flow channel: The role of grain boundary acting on vortex motion in type-Ⅱ superconductors 被引量:1
4
作者 Yu Liu Xiao-Fan Gou Feng Xue 《Chinese Physics B》 SCIE EI CAS CSCD 2021年第9期499-505,共7页
Grain boundaries(GBs),as extremely anisotropic pinning defects,have a strong impact on vortex motion in type-Ⅱsuperconductors,and further on the macro level dominates the superconductivity for example the critical cu... Grain boundaries(GBs),as extremely anisotropic pinning defects,have a strong impact on vortex motion in type-Ⅱsuperconductors,and further on the macro level dominates the superconductivity for example the critical current density.Many previous studies indicated that mostly GB plays the role of a strong barrier for vortex motion,while an easy-flow channel just under some certain conditions.In order to thoroughly make clear of the questions of what is exactly the role of GB on vortex motion and how it works,in this article we developed a large scale molecular dynamic model and revealed the action of GB on vortex motion in type-Ⅱsuperconductors.The most significant finding is that the role of GB on vortex motion can be changeable from a barrier to an easy-flow channel,and which is intrinsically determined by the competition effect correlated with its action on vortex between in the GB and no-GB regions.Such the competition effect essentially depends on the attributes of both the GB(described by the GB strength and angleθ)and no-GB pining regions(by the relative disorder strengthα_(p)/α_(v)).Specifically,for a YBa_(2)Cu_(3)O_(7-x)(YBCO)sample,to obtain a clear knowledge of vortex motion in GB region,we visualized the three typical trajectories of vortices during the three vortex movement stages.Further,in order to understand how GB results in the macro current-carrying property,corresponding to the current-voltage relation of the YBCO conductor,we obtained the average velocity v_(y) of vortices varying with their driving force,which is nearly identical with the previous observations. 展开更多
关键词 type-II superconductors grain boundary(GB) vortex motion competition effect GB strength the relative disorder strengthαp/αv
原文传递
Calculation of the Centrally Symmetric and Vortex Forces Acting on Momentum in Distortion Tensor Field: Explanation of High-Temperature Plasma and Vortex Motions
5
作者 Aleksander Yakovlevich Braginsky 《Journal of Applied Mathematics and Physics》 2019年第4期809-828,共20页
The paper deals with calculation of the centrally symmetric and vortex forces for the momentum of a particle in the distortion tensor field from the action minimum, by analogy with the calculation of forces for a char... The paper deals with calculation of the centrally symmetric and vortex forces for the momentum of a particle in the distortion tensor field from the action minimum, by analogy with the calculation of forces for a charge in an electromagnetic field. It is demonstrated that: 1) The compensating interaction tensor corresponds to the distortion tensor in a solid. 2) The centrally symmetric force of the distortion tensor acts on the momentum as a charge, and is analogous to the Coulomb force. In a gas, it results in change in the momentum value of the molecules exponentially to some extent. The action of this force explains the high-temperature plasma in the gas. 3) The vortex force of the distortion tensor is equivalent to the Peach-Koehler force in a solid. It acts on the momentum flow, similar to the Lorentz magnetic force, and explains the vortex motions in space, in the form of “black holes”, and in the atmosphere, in the form of cyclones and anticyclones. 展开更多
关键词 DISTORTION TENSOR High-Temperature Plasma vortex motions Turbulence Gauge FIELD Explosion of a METEORITE
在线阅读 下载PDF
Analysis of Vortex Motion in Porous Media
6
作者 Beant Singh Chanpreet Singh 《Journal of Electronics Cooling and Thermal Control》 2012年第2期32-34,共3页
In vortex motion fluid moves in curve path and the stream lines are curved. When the fluid flows between curved stream line, the centrifugal forces are setup which is counter balanced by pressure forces acting in the ... In vortex motion fluid moves in curve path and the stream lines are curved. When the fluid flows between curved stream line, the centrifugal forces are setup which is counter balanced by pressure forces acting in the radial direction. The vortex motion has two types of curved motion. The first type called free vortex type, the fluid moves due to its own natural effect but energy is not added to fluid when moving in curved path. The second type called forced vortex, in which energy is added to fluid. A two dimensional steady laminar free convective flow of viscous incompressible flow in porous media voids is considered. In this paper the motion of fluid is studied while moving in the porous media. It is studied that the motion of the fluid in the porous media is vortex motion at the low Reynolds’s number, where the motion is laminar motion and the fluid obeys the laws of vortex motion. 展开更多
关键词 POROUS MEDIA vortex motion Reynolds’s NUMBER
在线阅读 下载PDF
Modelling of the Vortex-Induced Motion of A Single-Column Platform with Non-Linear Mooring Stiffness Using the Coupled Wake Oscillators 被引量:2
7
作者 HU Xiao-feng ZHANG Xin-shu +1 位作者 YOU Yun-xiang DUAN Jin-long 《China Ocean Engineering》 SCIE EI CSCD 2019年第4期459-467,共9页
A phenomenological model for predicting the vortex-induced motion (VIM) of a single-column platform with non- linear stiffness has been proposed. The VIM model is based on the couple of the Duffing-van der Pol oscilla... A phenomenological model for predicting the vortex-induced motion (VIM) of a single-column platform with non- linear stiffness has been proposed. The VIM model is based on the couple of the Duffing-van der Pol oscillators and the motion equations with non-linear terms. The model with liner stiffness is presented for comparison and their results are compared with the experiments in order to calibrate the model. The computed results show that the predicted VIM amplitudes and periods of oscillation are in qualitative agreements with the experimental data. Compared with the results with linear stiffness, it is found that the application of non-linear stiffness causes the significant reductions in the in-line and transverse motion amplitudes. Under the non-linear stiffness constraint, the lock-in behavior is still identified at 8<Ur<15, and the trajectories of the VIM on the xy plane with eight-figure patterns are maintained. The results with different non-linear geometrically parameters show that both in-line and transverse non-linear characteristics can significantly affect the predict in-line and transverse motion amplitudes. Furthermore, the computed results for different aspect ratios indicate that the in-line and transverse motion amplitudes increase with the growth of aspect ratio, and the range of lock-in region is enlarged for the large aspect ratio. 展开更多
关键词 vortex-induced motion single-column PLATFORM WAKE oscillators NON-LINEAR stiffness
在线阅读 下载PDF
Study on Vortex-Induced Motions of A New Type of Deep Draft Multi-Columns FDPSO 被引量:3
8
作者 GU Jia-yang XIE Yu-lin +3 位作者 ZHAO Yuan LI Wen-juan TAO Yan-wu HUANG Xiang-hong 《China Ocean Engineering》 SCIE EI CSCD 2018年第1期1-13,共13页
A numerical simulation and an experimental study on vortex-induced motion(VIM) of a new type of deep draft multi-columns floating drilling production, storage and offloading(FDPSO) are presented in this paper. The... A numerical simulation and an experimental study on vortex-induced motion(VIM) of a new type of deep draft multi-columns floating drilling production, storage and offloading(FDPSO) are presented in this paper. The main dimension, the special variable cross-section column and the cabin arrangement of the octagonal pontoon are introduced based on the result. The numerical simulation is adapted to study the effects of current incidence angles and reduced velocities on this platform’s sway motion response. The 300 m water depth equivalent truncated mooring system is adopted for the model tests. The model tests are carried out to check the reliability of numerical simulation. The results consist of surge, sway and yaw motions, as well as motion trajectories. The maximum sway amplitudes for different types of offshore platform is also studied. The main results show that the peak frequencies of sway motion under different current incidence angles and reduced velocities vary around the natural frequency. The analysis result of flow field indicates that the change of distribution of vortex in vertical presents significant influences on the VIM of platform. The trend of sway amplitude ratio curve of this new type FDPSO differs from the other types of platform. Under 45° current incidence angle, the sway amplitude of this new type of FDPSO is much smaller than those of other types of offshore platform at 4.4 ≤ V;≤ 8.9. The typical ‘8’ shape trajectory does not appear in the platform’s motion trajectories. 展开更多
关键词 FDPSO multi-columns vortex-induced motion(VIM) model tests variable cross-section column
在线阅读 下载PDF
Research on the Effects of in-Line Oscillatory Flow on the Vortex-Induced Motions of A Deep Draft Semi-Submersible in Currents
9
作者 WU Fan XIAO Long-fei +1 位作者 LIU Ming-yue TIAN Xin-liang 《China Ocean Engineering》 SCIE EI CSCD 2017年第3期272-283,共12页
A Deep Draft Semi-submersible (DDS) under certain flow conditions could be subjected to Vortex-Induced Motions (VIM), which significantly influences the loads on and life fatigue of the moorings and the risers. To... A Deep Draft Semi-submersible (DDS) under certain flow conditions could be subjected to Vortex-Induced Motions (VIM), which significantly influences the loads on and life fatigue of the moorings and the risers. To investigate the VIM of a DDS with four rectangular section columns in waves coupled with a uniform current, a numerical study using the computational fluid dynamics (CFD) method was conducted. The issues of the VIM of multi-column floaters can be con','eniently converted to the issues of oscillating cylinders in fluid cross flows. This paper looks into the CFD numerical simulation of infinite cylinders having rectangular sections in a two-dimensional sinusoidal time- dependent flow field coupled with a uniform current. The resulted hydrodynamic forces and motion responses in different oscillatory flows plus currents both aligned in the same direction for the incidence of 135° of the DDS relative to the flow are compared with the ones in current only cases. The results show that the VIM response of this geometric arrangement of a DDS with four rectangular columns in a current combined with oscillatory flows is more evident than that in the current only case. The oscillatory flows and waves have the significant influence on the VIM response, forces and trajectory, in-plane motions of the DDS. 展开更多
关键词 vortex-Induced motion (VIM) deep draft semi-submersible numerical simulation oscillatory flow uniform current
在线阅读 下载PDF
Simulation on motion of particles in vortex merging process
10
作者 黄海明 徐晓亮 《Applied Mathematics and Mechanics(English Edition)》 SCIE EI 2010年第4期461-470,共10页
In a two-phase flow, the vortex merging influences both the flow evolution and the particle motion. With the blobs-splitting-and-merging scheme, the vortex merging is calculated by a corrected core spreading vortex me... In a two-phase flow, the vortex merging influences both the flow evolution and the particle motion. With the blobs-splitting-and-merging scheme, the vortex merging is calculated by a corrected core spreading vortex method (CCSVM). The particle motion in the vortex merging process is calculated according to the particle kinetic model. The results indicate that the particle traces are spiral lines with the same rotation direction as the spinning vortex. The center of the particle group is in agreement with that of the merged vortex. The merging time is determined by the circulation and the initial ratio of the vortex radius and the vortex center distance. Under a certain initial condition, a stretched particle trail is generated, which is determined by the viscosity, the relative position between the particles and the vortex, and the asymmetrical circulation of the two merging vortices. 展开更多
关键词 vortex method vortex merging particle motion particle trail
在线阅读 下载PDF
基于Vortex的6自由度平台洗出运动仿真 被引量:10
11
作者 魏春雨 周晓军 +1 位作者 魏燕定 唐昉 《浙江大学学报(工学版)》 EI CAS CSCD 北大核心 2012年第8期1390-1396,共7页
为了研究并联6自由度平台在车辆驾驶过程中的洗出运动,实现车辆动力学模型和6自由度运动平台模型的联合仿真,提出一种利用Vortex多体动力学软件对6自由度平台进行建模,复现车辆模型运动过程的仿真方法.平台液压油缸初始位姿采用解析法... 为了研究并联6自由度平台在车辆驾驶过程中的洗出运动,实现车辆动力学模型和6自由度运动平台模型的联合仿真,提出一种利用Vortex多体动力学软件对6自由度平台进行建模,复现车辆模型运动过程的仿真方法.平台液压油缸初始位姿采用解析法进行确定,在Matlab/Simulink中实现运动平台的洗出滤波算法和运动学反解算法,利用转弯和直线2种典型运动进行仿真验证.在给定路面上进行虚拟驾驶,Vortex车辆动力学模型解算结果使车辆产生相应的连续运动状态,相关动力学参数经过洗出滤波算法、平台运动学反解运算得到各油缸伸长量,驱动Vortex软件中建立的6自由度运动平台模型.结果表明,利用Vortex软件可以将车辆动力学模型和并联6自由度平台模型进行联合仿真,实现平台洗出运动的可视化. 展开更多
关键词 vortex 并联6自由度平台 洗出滤波算法 洗出运动仿真 车辆动力学模型 模拟器
在线阅读 下载PDF
MOTION ANALYSIS OF A SPINNING SATELLITE SYSTEM WITH OFF-CENTRE TANKS PARTIALLY FILLED WITH LIQUID
12
作者 Wang Zhaolin Liao Min Deng Zhongping(Department of Engineering Mechanics,Tsinghua University) 《Acta Mechanica Sinica》 SCIE EI CAS CSCD 1989年第3期269-277,共9页
The sloshing problem for a spherical tank partially filled with liquid is analysed in this paper The study is based on the goveming equations of fluid dynamics and the Euler's equations of systems with the influen... The sloshing problem for a spherical tank partially filled with liquid is analysed in this paper The study is based on the goveming equations of fluid dynamics and the Euler's equations of systems with the influences of tank off centering,fluid vortices and the Coriolis'acceleration on the motion states of the systems taken into consideration.In the study,we adopt the concept of uniform vortex motion of fluid gen- eralized by Pfeiffer and apply the boundary element method(BEM)to the calculation of the natural frequence and the velocity field of the liquid sloshing.The motion charateristics of the flow-solid spinning system is then analysed. 展开更多
关键词 liquid sloshing fluid-solid coupling liquid-filled satellite vortex motion
在线阅读 下载PDF
间距比对半潜式海上风力机涡激运动特征影响研究
13
作者 魏东泽 刘祖宏 乔萌娜 《太阳能学报》 北大核心 2026年第2期599-605,共7页
为探究间距比对半潜式海上风力机涡激运动的影响,采用拖曳水池模型试验的方法,开展45°流向下,间距比对于半潜式风力机涡激运动响应幅值、频率以及运动轨迹等关键特征影响的研究,观察到较为明显的涡激运动的3个阶段:非锁定区、锁定... 为探究间距比对半潜式海上风力机涡激运动的影响,采用拖曳水池模型试验的方法,开展45°流向下,间距比对于半潜式风力机涡激运动响应幅值、频率以及运动轨迹等关键特征影响的研究,观察到较为明显的涡激运动的3个阶段:非锁定区、锁定区以及超锁定区,讨论不同阶段中间距比对半潜式风力机横荡、纵荡以及艏摇运动响应幅值的影响,并着重分析各阶段中结构三向运动的耦合关系及运动频率特征。研究表明:间距比是决定半潜式风力机三向运动响应幅值的重要因素,更大的间距比可能导致更为激烈的运动,从而使结构发生疲劳损伤的危害性更大;间距比对结构三向运动耦合关系影响不明显,同时,各间距比结构运动轨迹随约化速度变化规律基本一致。 展开更多
关键词 半潜式海上风力机 间距比 涡激运动 频率 响应幅值 运动轨迹
原文传递
基于Vortex的客滚船拉锚仿真分析 被引量:1
14
作者 宋磊 杨爱华 +3 位作者 杨卓懿 欧书博 李玉山 张冰 《造船技术》 2023年第1期19-23,共5页
针对拉锚试验仿真提出一种分析方法。以某客滚船为研究对象,基于变质量运动学理论,利用SolidWorks和Vortex软件开发、创建一种实时有效的锚系动态仿真方法,并与现场拉锚场景进行比对,以验证该方法的可行性和可靠性,为锚系仿真提供有效参... 针对拉锚试验仿真提出一种分析方法。以某客滚船为研究对象,基于变质量运动学理论,利用SolidWorks和Vortex软件开发、创建一种实时有效的锚系动态仿真方法,并与现场拉锚场景进行比对,以验证该方法的可行性和可靠性,为锚系仿真提供有效参考,并为取代木模试验提供条件。 展开更多
关键词 客滚船 拉锚仿真 vortex软件 锚系运动
在线阅读 下载PDF
基于风-桥-车-人耦合振动的公路悬索桥竖弯涡激振动条件下驾驶员晕动症研究
15
作者 李涵 朱金 +1 位作者 李永乐 高宗余 《振动工程学报》 北大核心 2026年第1期279-290,共12页
为了分析大跨度公路悬索桥发生竖弯涡振时桥上驾驶员的晕动症情况,将一维竖向人体振动模型引入传统的风-车-桥耦合振动模型中,同时采用简谐涡激力模型模拟桥梁的涡振,建立大跨度桥梁涡振条件下的风-桥-车-人耦合振动分析模型,以此计算... 为了分析大跨度公路悬索桥发生竖弯涡振时桥上驾驶员的晕动症情况,将一维竖向人体振动模型引入传统的风-车-桥耦合振动模型中,同时采用简谐涡激力模型模拟桥梁的涡振,建立大跨度桥梁涡振条件下的风-桥-车-人耦合振动分析模型,以此计算人体振动响应。根据国际标准评价法ISO 2631-1:1997(E),提出以人体振动响应为基础的驾驶员晕动症指标计算方法。上述精细化算法所需的计算资源和时间较多,而为了便于实际的工程应用,还提出了一种快速计算驾驶员人体振动响应和晕动症指标的简化算法。基于风-桥-车-人耦合振动模型,以一座大跨度悬索桥为例,分析涡振条件下桥上车辆及驾驶员人体各部位的振动响应。同时,将采用精细化算法和简化算法计算得到的涡振条件下桥上驾驶员的人体振动响应及晕动症指标进行了对比,以验证简化算法的可行性。研究结果表明:在桥梁涡振的激励下,人-车耦合振动效应对车辆自身的振动几乎没有影响;人体与车体以及人体各个部位的振动响应差异随着涡振频率的增加而增加;简化算法的计算效率较高,且对于实际工程而言具有可行性。 展开更多
关键词 桥梁工程 涡激振动 风-桥-车-人耦合振动 晕动症 人体振动模型
在线阅读 下载PDF
考虑水动力升力效应的船舶随浪中纯稳性丧失运动预报分析
16
作者 张晋雅 马宁 +1 位作者 段建文 史琪琪 《中国舰船研究》 北大核心 2026年第1期12-22,共11页
[目的]旨在研究随浪中横倾与航速共同作用下水动力升力效应的影响,提升纯稳性丧失的数值预报精度。[方法]首先,发展基于统一理论的六自由度弱非线性运动模型的数值计算方法,该方法不仅耦合耐波性与操纵性的动力学特征,还通过涡格法(VLM... [目的]旨在研究随浪中横倾与航速共同作用下水动力升力效应的影响,提升纯稳性丧失的数值预报精度。[方法]首先,发展基于统一理论的六自由度弱非线性运动模型的数值计算方法,该方法不仅耦合耐波性与操纵性的动力学特征,还通过涡格法(VLM)引入升力项,以表征横倾角和航速变化所引起的横向流体作用;其次,针对涡格法可能导致升力项高估的问题,采用计算流体力学(CFD)方法,对船舶自航时的涡脱落情况进行定量分析,进而对涡格法所计算的升力项进行修正;最后,将修正后的六自由度运动模型预报结果与公开发表的模型试验数据进行对比验证。[结果]结果显示,当船速增高时,升力对船舶横摇响应具有显著的放大效应;经CFD修正后的升力项可有效降低涡格法的高估偏差,提升六自由度运动模型对船舶随浪非线性横摇运动的预报精度。[结论]所做研究明确了升力效应对船舶随浪非线性横摇运动的影响规律,验证了基于涡格法和CFD修正的六自由度弱非线性运动模型在船舶横摇运动预报中的有效性,可为船舶稳性评估及航行策略制定提供技术支持。 展开更多
关键词 船舶稳性 横摇运动 弱非线性运动模型 六自由度 涡格法 水动力升力 计算流体力学
在线阅读 下载PDF
喷气涡流纺成纱气流场及纤维运动模拟分析和实验
17
作者 付佳琦 吉陈湘 杨瑞华 《纺织学报》 北大核心 2026年第1期89-97,共9页
为明确喷气涡流纺纺纱过程中加捻腔内的气流变化和纤维运动规律,对引纱过程和稳定纺纱过程中的气流和纤维运动进行模拟研究。结果表明:高速旋转气流的卷吸作用使得喷嘴入口形成负压气流吸入纤维,还导致加捻腔出现向上运动的气流,在纤维... 为明确喷气涡流纺纺纱过程中加捻腔内的气流变化和纤维运动规律,对引纱过程和稳定纺纱过程中的气流和纤维运动进行模拟研究。结果表明:高速旋转气流的卷吸作用使得喷嘴入口形成负压气流吸入纤维,还导致加捻腔出现向上运动的气流,在纤维输入通道内形成回流区域。引纱纺纱过程中喷嘴加捻腔内的气流场分布规律与纺纱阶段下的分布规律相似,但是受到空心管内的气流影响,越靠近空心锭口,负压值和气流速度就越大,越靠近导引针,梯度越不明显,在引纱通道内有明显的压力、速度梯度分布。在纺纱过程中纤维在喷嘴内的运动分为4个阶段,分别对应纤维输入通道进出口、加捻腔进出口、空心锭表面停留和引纱管进出口。从纤维输入通道进口到出口纤维速度逐渐增大,进入加捻腔后加速度进一步增大,速度更快,继续向前接触空心锭表面在进入引纱管前,纤维速度逐渐降低,进入引纱管后速度提高并在引纱管出口达到最大;在引纱过程纤维速度变化与此类似。 展开更多
关键词 喷气涡流纺 数值模拟 加捻腔 气流运动 纤维运动 新型纺纱 半自由端纺纱
在线阅读 下载PDF
四川盆地一次暴雨过程的重力波与西南涡关系研究 被引量:2
18
作者 李国平 许一洲 +1 位作者 张晓玉 谢新 《高原山地气象研究》 2025年第1期9-19,共11页
利用ERA5再分析资料、GPM卫星降水产品,对2023年8月25—26日四川盆地一次暴雨过程不同阶段重力波与西南涡的关系进行研究,以期加深重力波与西南涡相互作用机理的认识。结果表明:300 hPa附近有中尺度重力波受切变不稳定和非地转辐合辐散... 利用ERA5再分析资料、GPM卫星降水产品,对2023年8月25—26日四川盆地一次暴雨过程不同阶段重力波与西南涡的关系进行研究,以期加深重力波与西南涡相互作用机理的认识。结果表明:300 hPa附近有中尺度重力波受切变不稳定和非地转辐合辐散机制的影响而激发,与重力波相联系的辐散区东移延伸至四川盆地并触发不稳定能量释放,配合500 hPa弱槽和盆地较好的热力和动力条件,共同导致重力波云带东侧垂直运动快速而强烈发展。重力波以北雨带东移进入四川盆地后,北风加强使原本由南风产生的风切变加大、气旋式环流趋于闭合而生成西南涡。当重力波正位相位于700 hPa西南涡环流内的两个上升运动中心之间时,上升气流向400 hPa以上伸展并形成次级环流圈,由此产生贯穿整个对流层范围的积雨云。当重力波正位相出现在西南涡上升气流的下游高空时,重力波云系得以在下游发展,出现由高层云系产生并向下游延伸的弱降水区。西南涡内上升气流与重力波正位相是否耦合,是重力波云系能否进一步发展以及降水范围能否扩大的关键。 展开更多
关键词 四川盆地 暴雨 重力波 西南涡 上升运动
在线阅读 下载PDF
悬浮隧道支撑锚索在管体运动下的涡激响应
19
作者 易壮鹏 朱灿 刘炎 《交通科学与工程》 2025年第5期108-115,共8页
【目的】针对悬浮隧道这一新型跨江、跨海水下结构,研究其支撑锚索的动力响应问题。【方法】为研究管体运动状态下锚索的涡激响应,利用尾流振子考虑支撑锚索与水流之间的相互作用,依据锚索顶张力与该索支撑范围内净浮力相等的原则确立... 【目的】针对悬浮隧道这一新型跨江、跨海水下结构,研究其支撑锚索的动力响应问题。【方法】为研究管体运动状态下锚索的涡激响应,利用尾流振子考虑支撑锚索与水流之间的相互作用,依据锚索顶张力与该索支撑范围内净浮力相等的原则确立基本结构参数,建立管体运动和水流涡激同时作用时基于欧拉⁃伯努利(Euler⁃Bernoulli)梁的锚索运动微分方程;采用伽辽金(Galerkin)截断实现时间与空间的变量分离,并使用龙格⁃库塔(Runge⁃Kutta)法分析锚索的涡激响应规律与尾流振子的运动规律;阐述锚索湿重及管体运动状态对锚索涡激响应曲线分布规律的影响。【结果】第1阶模态的涡激响应均占主导地位;锚索湿重对涡激响应的影响不可忽略,不考虑湿重会使响应幅值偏小;管体运动状态下锚索涡激响应幅值比管体静止时的幅值大,且振动规律更加复杂;在管体运动和涡激力共同作用下,锚索“拍”周期和振动幅值均比管体静止状态时的大。【结论】研究内容可为悬浮隧道锚索的动力设计与安全防控提供理论参考。 展开更多
关键词 悬浮隧道 支撑锚索 管体运动 涡激响应 锚索湿重
在线阅读 下载PDF
分离式三箱梁涡激振动的风洞试验研究 被引量:1
20
作者 高东来 孟昊 +1 位作者 陈文礼 李惠 《工程力学》 北大核心 2025年第6期228-233,共6页
分离式三箱梁因其卓越的极限跨度和颤振稳定性,已在大跨度桥梁越来越广泛地采用。针对分离式三箱梁对风荷载极其敏感,易发生涡激振动的情况,以国内某座正在筹建的典型大跨度桥梁分离式三箱梁为工程背景,通过风洞测振、测风速及烟线可视... 分离式三箱梁因其卓越的极限跨度和颤振稳定性,已在大跨度桥梁越来越广泛地采用。针对分离式三箱梁对风荷载极其敏感,易发生涡激振动的情况,以国内某座正在筹建的典型大跨度桥梁分离式三箱梁为工程背景,通过风洞测振、测风速及烟线可视化的方法,研究了裸桥状态下分离式三箱梁的涡振特性及绕流场特性。为揭示分离式三箱梁的涡振机理,该文分别遮盖上游间隙、下游间隙、上下游间隙,在0°风攻角下,对比分析了涡振各阶段主梁模型的涡振响应和流场特征。结果表明:分离式三箱梁涡振存在5个阶段(开始阶段、上升第一阶段、上升第二阶段、峰值阶段、衰减阶段),同时伴随2大类旋涡(卡门旋涡、振动诱导涡),上游间隙中的卡门旋涡诱导了涡振的发生,不同位置的振动诱导涡导致了涡振在不同阶段的恶化。 展开更多
关键词 分离式三箱梁 风洞试验 涡激振动 卡门旋涡 振动诱导涡
在线阅读 下载PDF
上一页 1 2 15 下一页 到第
使用帮助 返回顶部