This paper presents a hybrid finite volume/finite element method for the incompressible generalized Newtonian fluid flow （Power-Law model）. The collocated （i.e. non-staggered） arrangement of variables is used on t...This paper presents a hybrid finite volume/finite element method for the incompressible generalized Newtonian fluid flow （Power-Law model）. The collocated （i.e. non-staggered） arrangement of variables is used on the unstructured triangular grids, and a fractional step projection method is applied for the velocity-pressure coupling. The cell-centered finite volume method is employed to discretize the momentum equation and the vertex-based finite element for the pressure Poisson equation. The momentum interpolation method is used to suppress unphysical pressure wiggles. Numerical experiments demonstrate that the current hybrid scheme has second order accuracy in both space and time. Results on flows in the lid-driven cavity and between parallel walls for Newtonian and Power-Law models are also in good agreement with the published solutions.展开更多
In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results i...In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results in increased leakage current,decreased breakdown voltage,and lower nonlinearity,ultimately compromising their protective performance.To investigate the evolution in electrical properties during DC aging,this work developed a finite element model based on Voronoi networks and conducted accelerated aging tests on commercial varistors.Throughout the aging process,current-voltage characteristics and Schottky barrier parameters were measured and analyzed.The results indicate that when subjected to constant voltage,current flows through regions with larger grain sizes,forming discharge channels.As aging progresses,the current focus increases on these channels,leading to a decline in the varistor’s overall performance.Furthermore,analysis of the Schottky barrier parameters shows that the changes in electrical performance during aging are non-monotonic.These findings offer theoretical support for understanding the aging mechanisms and condition assessment of modern stable ZnO varistors.展开更多
Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability an...Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability and short service life.To address these issues,low-phenyl silicone rubber was prepared and tested,and the finite element analysis and experimental studies on the sealing performance of its sealing rings were carried out.Design/methodology/approach–The low-temperature resistance and thermal stability of the prepared lowphenyl silicone rubber were studied using low-temperature tensile testing,differential scanning calorimetry,dynamic thermomechanical analysis and thermogravimetric analysis.The sealing performance of the lowphenyl silicone rubber sealing ring was studied by using finite element analysis software abaqus and experiments.Findings–The prepared low-phenyl silicone rubber sealing ring possessed excellent low-temperature resistance and thermal stability.According to the finite element analysis results,the finish of the flange sealing surface and groove outer edge should be ensured,and extrusion damage should be avoided.The sealing rings were more susceptible to damage in high compression ratio and/or low-temperature environments.When the sealing effect was ensured,a small compression ratio should be selected,and rubbers with hardness and elasticity less affected by temperature should be selected.The prepared low-phenyl silicone rubber sealing ring had zero leakage at both room temperature(RT)and�508C.Originality/value–The innovation of this study is that it provides valuable data and experience for the future development of the sealing rings used in the brake pipe flange joints of the railway freight cars in China.展开更多
Total hip arthroplasty for adults with sequelae from childhood hip disorders poses significant challenges due to altered anatomy.The paper published by Oommen et al reviews the essential management strategies for thes...Total hip arthroplasty for adults with sequelae from childhood hip disorders poses significant challenges due to altered anatomy.The paper published by Oommen et al reviews the essential management strategies for these complex cases.This article explores the integration of finite element analysis(FEA)to enhance surgical precision and outcomes.FEA provides detailed biomechanical insights,aiding in preoperative planning,implant design,and surgical technique optimization.By simulating implant configurations and assessing bone quality,FEA helps in customizing implants and evaluating surgical techniques like subtrochanteric shortening osteotomy.Advanced imaging techniques,such as 3D printing,virtual reality,and augmented reality,further enhance total hip arthroplasty precision.Future research should focus on validating FEA models,developing patient-specific simulations,and promoting multidisciplinary collaboration.Integrating FEA and advanced technologies in total hip arthroplasty can improve functional outcomes,reduce complications,and enhance quality of life for patients with childhood hip disorder sequelae.展开更多
In this work,we compute the Grothendieck groups of finite 2-Calabi-Yau triangulated categories with maximal rigid objects which are not cluster tilting.These finite 2-Calabi-Yau triangulated categories are divided int...In this work,we compute the Grothendieck groups of finite 2-Calabi-Yau triangulated categories with maximal rigid objects which are not cluster tilting.These finite 2-Calabi-Yau triangulated categories are divided into,by the work of Amiot[Bull.Soc.Math.France,2007,135(3):435-474](see also[Adv.Math.,2008,217(6):2443-2484]and[J.Algebra,2016,446:426-449]),three classes:type A,type D and type E.展开更多
This paper presents a nonlinear micropolar nonclassical continuum theory (MPNCCT) for finite deformation, finite strain deformation physics of thermosviscoelastic solid medium with memory (polymeric micropolar solids)...This paper presents a nonlinear micropolar nonclassical continuum theory (MPNCCT) for finite deformation, finite strain deformation physics of thermosviscoelastic solid medium with memory (polymeric micropolar solids) based on classical rotations cΘand their rates. Contravariant second Piola-Kirchhoff stress and moment tensors, in conjunction with finite deformation measures derived by the authors in recent paper, are utilized in deriving the conservation and balance laws and the constitutive theories based on conjugate pairs in entropy inequality and the representation theorem. This nonlinear MPNCCT for TVES with rheology: 1) incorporates nonlinear ordered rate dissipation mechanism based on Green’s strain rates up to order n;2) also incorporates an additional ordered rate dissipation mechanism due to microconstituents, the viscosity of the medium and the rates of the symmetric part of the rotation gradient (of cΘ) tensor up to order n, referred to as micropolar dissipation or micropolar viscous dissipation mechanism;3) incorporates the primary mechanism of memory or rheology due to long chain molecules of the polymer and the viscosity of the medium by using the contravaraint second Piola-Kirchhoff stress tensor and its rates up to order m, resulting in a relaxation spectrum;4) incorporates second mechanism of memory or rheology due to nonclassical physics, interaction of microconstituents with the viscous medium and long chain molecules by considering rates of the contravariant second Piola-Kirchhoff moment tensor up to order m, resulting in relaxation of second Piola-Kirchhoff moment tensor. This results in another relaxation spectrum for the second Piola-Kirchhoff moment tensor due to microconstituents, referred to as micropolar relaxation spectrum consisting of micropolar relaxation time constants of the material. This nonlinear MPNCCT for TVES with memory is thermodynamically and mathematically consistent, and the mathematical model consisting of conservation and balance laws and the constitutive theories has closure and naturally reduces to linear MPNCCT based on infinitesimal deformation assumption. BMM is the essential balance law for all MPNCCT and is used in the present work as well. In the absence of this balance law, a valid thermodynamically and mathematically consistent nonlinear MPNCCT is not possible. The nonlinear MPNCCT based on rotations (cΘ+αΘ) and αΘ(ignoring cΘ) is not considered due to the fact that even the linear MPNCCT based on these rotations is invalid and is thermodynamically and mathematically inconsistent MPNCCT.展开更多
Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this devic...Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.展开更多
This paper mainly studies the well-posedness of steady incompressible impinging jet flow problem through a 3D axisymmetric finitely long nozzle.This problem originates from the physical phenomena encountered in practi...This paper mainly studies the well-posedness of steady incompressible impinging jet flow problem through a 3D axisymmetric finitely long nozzle.This problem originates from the physical phenomena encountered in practical engineering fields,such as in short take-off and vertical landing(STOVL)aircraft.Nowadays many intricate phenomena associated with impinging jet flows remain inadequately elucidated,which limits the ability to optimize aircraft design.Given a boundary condition in the inlet,the impinging jet problem is transformed into a Bernoulli-type free boundary problem according to the stream function.Then the variational method is used to study the corresponding variational problem with one parameter,thereby the wellposedness is established.The main conclusion is as follows.For a 3D axisymmetric finitely long nozzle and an infinitely long vertical wall,given an axial velocity in the inlet of nozzle,there exists a unique smooth incom‑pressible impinging jet flow such that the free boundary initiates smoothly at the endpoint of the nozzle and extends to infinity along the vertical wall at far fields.The key point is to investigate the regularity of the corner where the nozzle and the vertical axis intersect.展开更多
Design a precision electroplating mechanical structure for automobiles based on finite element analysis method and analyze its mechanical properties.Taking the automobile steering knuckle as the research object,ABAQUS...Design a precision electroplating mechanical structure for automobiles based on finite element analysis method and analyze its mechanical properties.Taking the automobile steering knuckle as the research object,ABAQUS parametric modeling technology is used to construct its three-dimensional geometric model,and geometric simplification is carried out.Two surface treatment processes,HK-35 zinc nickel alloy electroplating and pure zinc electroplating,were designed,and the influence of different coatings on the mechanical properties of steering knuckles was compared and analyzed through numerical simulation.At the same time,standard specimens were prepared for salt spray corrosion testing and scratch method combined strength testing to verify the numerical simulation results.The results showed that under emergency braking and composite working conditions,the peak Von Mises stress of the zinc nickel alloy coating was 119.85 MPa,which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Its equivalent strain value was 652×10^(-6),which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Experimental data confirms that zinc nickel alloy coatings exhibit significant advantages in stress distribution uniformity,strain performance,and load-bearing capacity in high stress zones.The salt spray corrosion test further indicates that the coating has superior corrosion resistance and coating substrate interface bonding strength,which can significantly improve the mechanical stability and long-term reliability of automotive precision electroplating mechanical structures.展开更多
This article presents a micro-structure tensor enhanced elasto-plastic finite element(FE)method to address strength anisotropy in three-dimensional(3D)soil slope stability analysis.The gravity increase method(GIM)is e...This article presents a micro-structure tensor enhanced elasto-plastic finite element(FE)method to address strength anisotropy in three-dimensional(3D)soil slope stability analysis.The gravity increase method(GIM)is employed to analyze the stability of 3D anisotropic soil slopes.The accuracy of the proposed method is first verified against the data in the literature.We then simulate the 3D soil slope with a straight slope surface and the convex and concave slope surfaces with a 90turning corner to study the 3D effect on slope stability and the failure mechanism under anisotropy conditions.Based on our numerical results,the end effect significantly impacts the failure mechanism and safety factor.Anisotropy degree notably affects the safety factor,with higher degrees leading to deeper landslides.For concave slopes,they can be approximated by straight slopes with suitable boundary conditions to assess their stability.Furthermore,a case study of the Saint-Alban test embankment A in Quebec,Canada,is provided to demonstrate the applicability of the proposed FE model.展开更多
Accurately simulating water flow movement in vadose zone is crucial for effective water resources assessment.Richards'equation,which describes the movement of water flow in the vadose zone,is highly nonlinear and ...Accurately simulating water flow movement in vadose zone is crucial for effective water resources assessment.Richards'equation,which describes the movement of water flow in the vadose zone,is highly nonlinear and challenging to solve.Existing numerical methods often face issues such as numerical dispersion,oscillation,and mass non-conservation when spatial and temporal discretization conditions are not appropriately configured.To address these problems and achieve accurate and stable numerical solutions,a finite analytic method based on water content-based Richards'equation(FAM-W)is proposed.The performance of the FAM-W is compared with analytical solutions,Finite Difference Method(FDM),and Finite Analytic Method based on the pressure Head-based Richards'equation(FAM-H).Compared to analytical solution and other numerical methods(FDM and FAM-H),FAM-W demonstrates superior accuracy and efficiency in controlling mass balance errors,regardless of spatial step sizes.This study introduces a novel approach for modelling water flow in the vadose zone,offering significant benefits for water resources management.展开更多
To enhance the computational efficiency of spatio-temporally discretized phase-field models,we present a high-speed solver specifically designed for the Poisson equations,a component frequently used in the numerical c...To enhance the computational efficiency of spatio-temporally discretized phase-field models,we present a high-speed solver specifically designed for the Poisson equations,a component frequently used in the numerical computation of such models.This efficient solver employs algorithms based on discrete cosine transformations(DCT)or discrete sine transformations(DST)and is not restricted by any spatio-temporal schemes.Our proposed methodology is appropriate for a variety of phase-field models and is especially efficient when combined with flow field systems.Meanwhile,this study has conducted an extensive numerical comparison and found that employing DCT and DST techniques not only yields results comparable to those obtained via the Multigrid(MG)method,a conventional approach used in the resolution of the Poisson equations,but also enhances computational efficiency by over 90%.展开更多
A modified inner-element edge-based smoothed finite element method(IES-FEM)is developed and integrated with ABAQUS using a user-defined element(UEL)in this study.Initially,the smoothing domain discretization of IES-FE...A modified inner-element edge-based smoothed finite element method(IES-FEM)is developed and integrated with ABAQUS using a user-defined element(UEL)in this study.Initially,the smoothing domain discretization of IES-FEM is described and compared with ES-FEM.A practical modification of IES-FEM is then introduced that used the technique employed by ES-FEM for the nodal strain calculation.The differences in the strain computation among ES-FEM,IES-FEM,and FEM are then discussed.The modified IES-FEM exhibited superior performance in displacement and a slight advantage in stress compared to FEM using the same mesh according to the results obtained from both the regular and irregular elements.The robustness of the IES-FEM to severely deformed meshes was also verified.展开更多
This study presents a theoretical analysis of the perforation process of finite-thickness metal plates(with a thickness ratio of T_0/D = 0.6–1.5) under normal impact by spherical-nosed projectiles. The model is valid...This study presents a theoretical analysis of the perforation process of finite-thickness metal plates(with a thickness ratio of T_0/D = 0.6–1.5) under normal impact by spherical-nosed projectiles. The model is validated over an impact velocity range of 180–1247 m/s. The entire penetration process is divided into three stages: the crater formation stage, the steady stage, and the shear stage. A thicknessdependent dynamic cavity expansion resistance model is first introduced to quantitatively describe the axial resistance experienced by the projectile during the tip-entry and steady stages. Subsequently, a thickness-related damage parameter is proposed to refine the resistance expression during the transition from the steady stage to the shear stage, thereby eliminating discontinuities in resistance across stages. When the projectile fully perforates the target, the model predicts a gradual decay of resistance to zero as the residual ligament thickness vanishes, which better reflects the actual physical behavior. The model is validated using four sets of experimental conditions. In addition, to illustrate the model's applicability more intuitively, a numerical simulation case from the literature is reproduced, and the resulting resistance-time curve is compared with the model output. The results demonstrate that the proposed model agrees well with experimental data in terms of residual velocity, ballistic limit, and penetration resistance. Finally, a method for adjusting the threshold parameter within the resistance function is provided, and the influence of this coefficient on the model predictions is discussed.展开更多
In this paper,we investigate the Sobolev spaces W^(1,p)(V)and W_(0)^(1,p)(V)on a locally finite graph G=(V,E),which are fundamental tools when we apply the variational methods to partial differential equations on grap...In this paper,we investigate the Sobolev spaces W^(1,p)(V)and W_(0)^(1,p)(V)on a locally finite graph G=(V,E),which are fundamental tools when we apply the variational methods to partial differential equations on graphs.As a key contribution of this note,we show that in general,W^(1,p)(V)≠W_(0)^(1,p)(V)on locally finite graphs,which is different from the situation on Euclidean space RN.展开更多
A method combining finite difference method(FDM)and k-means clustering algorithm which can determine the threshold of rock bridge generation is proposed.Jointed slope models with different joint coalescence coefficien...A method combining finite difference method(FDM)and k-means clustering algorithm which can determine the threshold of rock bridge generation is proposed.Jointed slope models with different joint coalescence coefficients(k)are constructed based on FDM.The rock bridge area was divided through k-means algorithm and the optimal number of clusters was determined by sum of squared errors(SSE)and elbow method.The influence of maximum principal stress and stress change rate as clustering indexes on the clustering results of rock bridges was compared by using Euclidean distance.The results show that using stress change rate as clustering index is more effective.When the joint coalescence coefficient is less than 0.6,there is no significant stress concentration in the middle area of adjacent joints,that is,no generation of rock bridge.In addition,the range of rock bridge is affected by the coalescence coefficient(k),the relative position of joints and the parameters of weak interlayer.展开更多
As a key national project,a newly built plateau railway features a large proportion of tunnels and high construction difficulty.To reduce the voids in the secondary lining of tunnels and address issues such as ineffec...As a key national project,a newly built plateau railway features a large proportion of tunnels and high construction difficulty.To reduce the voids in the secondary lining of tunnels and address issues such as ineffective vibration of the vault,vault voiding,and the inability to monitor the casting status during tunnel lining construction with ordinary lining trolleys,a new smart lining trolley with large clearance that integrates functions such as vibration,automatic casting,and pressure monitoring has been developed.This was achieved by combining the functional design of the new smart lining trolley,comparing traditional construction techniques,and introducing information-based and intelligent design concepts.Through simulation calculations using finite element software modeling,it is verified that the structural stiffness,strength,and other performance parameters of the smart lining trolley meet the technical design requirements.展开更多
Identifying the damage and fracture properties of nuclear graphite materials and accurately simulating them are crucial when designing graphite core structures.To simulate the damage evolution and crack propagation of...Identifying the damage and fracture properties of nuclear graphite materials and accurately simulating them are crucial when designing graphite core structures.To simulate the damage evolution and crack propagation of graphite under stress in a finite element model,compression tests on disks and three-point bending tests on center-notched beams for fine-grained graphite(CDI-1D and IG11 graphite)were conducted.During these tests,digital image correlation and electronic speckle pattern interferometry techniques were utilized to observe the surface full-field displacements of the specimens.A segmented finite element inverse analysis method was developed to characterize the graphite’s damage evolution by quantifying the reduction in Young’s modulus with tensile and compressive strains in disk specimens.The fracture energy and bilinear tensile softening curve of the graphite were determined by comparing the load–displacement responses of the three-point bending tests and the finite element simulation.Finally,by combining the identified damage laws with a fracture criterion based on fracture energy,a damage–fracture model was established and used to simulate tensile tests on L-shaped specimens with different fillet radii.Simulations indicate that the damage area at the fillet expands with increasing radius,creating a blunting effect that enhances the load-bearing capacity of the specimens.This damage–fracture model can be applied to simulate graphite components in core structures.展开更多
This study generalizes the classical Taylor-Sedov framework to analyze finitesource spherical blast waves propagating through both uniform and power-law density media. Previous analyses have predominantly focused on t...This study generalizes the classical Taylor-Sedov framework to analyze finitesource spherical blast waves propagating through both uniform and power-law density media. Previous analyses have predominantly focused on the effects of varying initial conditions on blast dynamics. In contrast, this study investigates the primary shock wave evolution within different ambient gases, demonstrating the critical dependence on the initial density ratio between the blast sphere and the ambient medium, as well as the ambient density profile. We derive new scaling laws based on the density ratio, which accurately predict the dimensionless main shock distance. Furthermore, we systematically examine, for the first time, the conditions for uniform volume expansion, uniform surface area growth, and uniform shock wave propagation in power-law density media, revealing a key scaling relation associated with the power-law exponent. Numerical simulations validate these novel theoretical predictions, demonstrating excellent agreement with the normalized solutions. These findings provide new insights into blast wave dynamics in inhomogeneous media and have implications for astrophysical and laboratory plasma environments.展开更多
To effectively address the challenge where the speed of tunnel lining construction struggles to match that of tunnel face and inverted arch construction,and to enhance the quality of secondary lining,a new type of ske...To effectively address the challenge where the speed of tunnel lining construction struggles to match that of tunnel face and inverted arch construction,and to enhance the quality of secondary lining,a new type of skeleton-free,traversing secondary lining trolley has been developed.This trolley features a set of gantries paired with two sets of formwork.The formwork adopts a multi-segment hinged and strengthened design,ensuring its own strength can meet the requirements of secondary lining concrete pouring without relying on the support of the gantries.When retracted,the formwork can be transported by the gantries through another set of formwork in the supporting state,enabling early formwork support,effectively accelerating the construction progress of the tunnel’s secondary lining,and extending the maintenance time of the secondary lining with the formwork.Finite element software modeling was used for simulation calculations,and the results indicate that the structural strength,stiffness,and other performance parameters of the new secondary lining trolley meet the design requirements,verifying the rationality of the design.展开更多
基金supported by the National Natural Science Foundation of China (10771134).
文摘This paper presents a hybrid finite volume/finite element method for the incompressible generalized Newtonian fluid flow （Power-Law model）. The collocated （i.e. non-staggered） arrangement of variables is used on the unstructured triangular grids, and a fractional step projection method is applied for the velocity-pressure coupling. The cell-centered finite volume method is employed to discretize the momentum equation and the vertex-based finite element for the pressure Poisson equation. The momentum interpolation method is used to suppress unphysical pressure wiggles. Numerical experiments demonstrate that the current hybrid scheme has second order accuracy in both space and time. Results on flows in the lid-driven cavity and between parallel walls for Newtonian and Power-Law models are also in good agreement with the published solutions.
文摘In modern ZnO varistors,traditional aging mechanisms based on increased power consumption are no longer relevant due to reduced power consumption during DC aging.Prolonged exposure to both AC and DC voltages results in increased leakage current,decreased breakdown voltage,and lower nonlinearity,ultimately compromising their protective performance.To investigate the evolution in electrical properties during DC aging,this work developed a finite element model based on Voronoi networks and conducted accelerated aging tests on commercial varistors.Throughout the aging process,current-voltage characteristics and Schottky barrier parameters were measured and analyzed.The results indicate that when subjected to constant voltage,current flows through regions with larger grain sizes,forming discharge channels.As aging progresses,the current focus increases on these channels,leading to a decline in the varistor’s overall performance.Furthermore,analysis of the Schottky barrier parameters shows that the changes in electrical performance during aging are non-monotonic.These findings offer theoretical support for understanding the aging mechanisms and condition assessment of modern stable ZnO varistors.
基金supported by the Science and Technology Research and Development Plan of the China State Railway Group Company Limited(No.Q2023J012).
文摘Purpose–The brake pipe system was an essential braking component of the railway freight trains,but the existing E-type sealing rings had problems such as insufficient low-temperature resistance,poor heat stability and short service life.To address these issues,low-phenyl silicone rubber was prepared and tested,and the finite element analysis and experimental studies on the sealing performance of its sealing rings were carried out.Design/methodology/approach–The low-temperature resistance and thermal stability of the prepared lowphenyl silicone rubber were studied using low-temperature tensile testing,differential scanning calorimetry,dynamic thermomechanical analysis and thermogravimetric analysis.The sealing performance of the lowphenyl silicone rubber sealing ring was studied by using finite element analysis software abaqus and experiments.Findings–The prepared low-phenyl silicone rubber sealing ring possessed excellent low-temperature resistance and thermal stability.According to the finite element analysis results,the finish of the flange sealing surface and groove outer edge should be ensured,and extrusion damage should be avoided.The sealing rings were more susceptible to damage in high compression ratio and/or low-temperature environments.When the sealing effect was ensured,a small compression ratio should be selected,and rubbers with hardness and elasticity less affected by temperature should be selected.The prepared low-phenyl silicone rubber sealing ring had zero leakage at both room temperature(RT)and�508C.Originality/value–The innovation of this study is that it provides valuable data and experience for the future development of the sealing rings used in the brake pipe flange joints of the railway freight cars in China.
文摘Total hip arthroplasty for adults with sequelae from childhood hip disorders poses significant challenges due to altered anatomy.The paper published by Oommen et al reviews the essential management strategies for these complex cases.This article explores the integration of finite element analysis(FEA)to enhance surgical precision and outcomes.FEA provides detailed biomechanical insights,aiding in preoperative planning,implant design,and surgical technique optimization.By simulating implant configurations and assessing bone quality,FEA helps in customizing implants and evaluating surgical techniques like subtrochanteric shortening osteotomy.Advanced imaging techniques,such as 3D printing,virtual reality,and augmented reality,further enhance total hip arthroplasty precision.Future research should focus on validating FEA models,developing patient-specific simulations,and promoting multidisciplinary collaboration.Integrating FEA and advanced technologies in total hip arthroplasty can improve functional outcomes,reduce complications,and enhance quality of life for patients with childhood hip disorder sequelae.
文摘In this work,we compute the Grothendieck groups of finite 2-Calabi-Yau triangulated categories with maximal rigid objects which are not cluster tilting.These finite 2-Calabi-Yau triangulated categories are divided into,by the work of Amiot[Bull.Soc.Math.France,2007,135(3):435-474](see also[Adv.Math.,2008,217(6):2443-2484]and[J.Algebra,2016,446:426-449]),three classes:type A,type D and type E.
文摘This paper presents a nonlinear micropolar nonclassical continuum theory (MPNCCT) for finite deformation, finite strain deformation physics of thermosviscoelastic solid medium with memory (polymeric micropolar solids) based on classical rotations cΘand their rates. Contravariant second Piola-Kirchhoff stress and moment tensors, in conjunction with finite deformation measures derived by the authors in recent paper, are utilized in deriving the conservation and balance laws and the constitutive theories based on conjugate pairs in entropy inequality and the representation theorem. This nonlinear MPNCCT for TVES with rheology: 1) incorporates nonlinear ordered rate dissipation mechanism based on Green’s strain rates up to order n;2) also incorporates an additional ordered rate dissipation mechanism due to microconstituents, the viscosity of the medium and the rates of the symmetric part of the rotation gradient (of cΘ) tensor up to order n, referred to as micropolar dissipation or micropolar viscous dissipation mechanism;3) incorporates the primary mechanism of memory or rheology due to long chain molecules of the polymer and the viscosity of the medium by using the contravaraint second Piola-Kirchhoff stress tensor and its rates up to order m, resulting in a relaxation spectrum;4) incorporates second mechanism of memory or rheology due to nonclassical physics, interaction of microconstituents with the viscous medium and long chain molecules by considering rates of the contravariant second Piola-Kirchhoff moment tensor up to order m, resulting in relaxation of second Piola-Kirchhoff moment tensor. This results in another relaxation spectrum for the second Piola-Kirchhoff moment tensor due to microconstituents, referred to as micropolar relaxation spectrum consisting of micropolar relaxation time constants of the material. This nonlinear MPNCCT for TVES with memory is thermodynamically and mathematically consistent, and the mathematical model consisting of conservation and balance laws and the constitutive theories has closure and naturally reduces to linear MPNCCT based on infinitesimal deformation assumption. BMM is the essential balance law for all MPNCCT and is used in the present work as well. In the absence of this balance law, a valid thermodynamically and mathematically consistent nonlinear MPNCCT is not possible. The nonlinear MPNCCT based on rotations (cΘ+αΘ) and αΘ(ignoring cΘ) is not considered due to the fact that even the linear MPNCCT based on these rotations is invalid and is thermodynamically and mathematically inconsistent MPNCCT.
文摘Objective: To compare the stress distribution in the periodontal ligament under different orthodontic forces during canine distalization using long-arm brackets, and to determine the optimal force value for this device in orthodontic treatment. Methods: A finite element model was constructed after extracting the mandibular first premolar, and a long-arm bracket with a traction height of 6 mm was placed on the labial side of the mandibular canine. Three working conditions of 50 g, 100 g, and 150 g were simulated, and the magnitude and distribution of von Mises stress in the periodontal ligament were compared for each condition. Results: The maximum von Mises stress in the periodontal ligament was 0.013281 MPa in the 50 g condition, 0.02536 MPa in the 100 g condition, and 0.035549 MPa in the 150 g condition. As the orthodontic force increased, the stress distribution area in the periodontal ligament also expanded. Conclusion: A 100 g orthodontic force is the most suitable when using long-arm brackets, providing a relatively uniform stress distribution in the periodontal ligament and keeping the stress within a reasonable range.
文摘This paper mainly studies the well-posedness of steady incompressible impinging jet flow problem through a 3D axisymmetric finitely long nozzle.This problem originates from the physical phenomena encountered in practical engineering fields,such as in short take-off and vertical landing(STOVL)aircraft.Nowadays many intricate phenomena associated with impinging jet flows remain inadequately elucidated,which limits the ability to optimize aircraft design.Given a boundary condition in the inlet,the impinging jet problem is transformed into a Bernoulli-type free boundary problem according to the stream function.Then the variational method is used to study the corresponding variational problem with one parameter,thereby the wellposedness is established.The main conclusion is as follows.For a 3D axisymmetric finitely long nozzle and an infinitely long vertical wall,given an axial velocity in the inlet of nozzle,there exists a unique smooth incom‑pressible impinging jet flow such that the free boundary initiates smoothly at the endpoint of the nozzle and extends to infinity along the vertical wall at far fields.The key point is to investigate the regularity of the corner where the nozzle and the vertical axis intersect.
文摘Design a precision electroplating mechanical structure for automobiles based on finite element analysis method and analyze its mechanical properties.Taking the automobile steering knuckle as the research object,ABAQUS parametric modeling technology is used to construct its three-dimensional geometric model,and geometric simplification is carried out.Two surface treatment processes,HK-35 zinc nickel alloy electroplating and pure zinc electroplating,were designed,and the influence of different coatings on the mechanical properties of steering knuckles was compared and analyzed through numerical simulation.At the same time,standard specimens were prepared for salt spray corrosion testing and scratch method combined strength testing to verify the numerical simulation results.The results showed that under emergency braking and composite working conditions,the peak Von Mises stress of the zinc nickel alloy coating was 119.85 MPa,which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Its equivalent strain value was 652×10^(-6),which was lower than that of the pure zinc coating and the alkaline electroplated zinc layer.Experimental data confirms that zinc nickel alloy coatings exhibit significant advantages in stress distribution uniformity,strain performance,and load-bearing capacity in high stress zones.The salt spray corrosion test further indicates that the coating has superior corrosion resistance and coating substrate interface bonding strength,which can significantly improve the mechanical stability and long-term reliability of automotive precision electroplating mechanical structures.
基金supported by the National Natural Science Foundation of China(Grant Nos.51890912,51979025 and 52011530189).
文摘This article presents a micro-structure tensor enhanced elasto-plastic finite element(FE)method to address strength anisotropy in three-dimensional(3D)soil slope stability analysis.The gravity increase method(GIM)is employed to analyze the stability of 3D anisotropic soil slopes.The accuracy of the proposed method is first verified against the data in the literature.We then simulate the 3D soil slope with a straight slope surface and the convex and concave slope surfaces with a 90turning corner to study the 3D effect on slope stability and the failure mechanism under anisotropy conditions.Based on our numerical results,the end effect significantly impacts the failure mechanism and safety factor.Anisotropy degree notably affects the safety factor,with higher degrees leading to deeper landslides.For concave slopes,they can be approximated by straight slopes with suitable boundary conditions to assess their stability.Furthermore,a case study of the Saint-Alban test embankment A in Quebec,Canada,is provided to demonstrate the applicability of the proposed FE model.
基金supported by the National Natural Science Foundation of China(No.42372287 and No.U24A20178)the Fundamental Research Funds for the Central Universities CHD(No.2024SHEEAR002)+3 种基金the Fund Program for the Scientific Activities of Selected Returned Overseas Professionals in Shaanxi Province(No.2020024)the China Postdoctoral Science Foundation(GZC20232955,2024M753472,and 2024MD763937)the Science-Technology Foundation for Young Scientists of Gansu Province,China(No.24JRRA097)the Study of biodiversity survey and limiting factor analysis of Yinkentala(2023ZL01).
文摘Accurately simulating water flow movement in vadose zone is crucial for effective water resources assessment.Richards'equation,which describes the movement of water flow in the vadose zone,is highly nonlinear and challenging to solve.Existing numerical methods often face issues such as numerical dispersion,oscillation,and mass non-conservation when spatial and temporal discretization conditions are not appropriately configured.To address these problems and achieve accurate and stable numerical solutions,a finite analytic method based on water content-based Richards'equation(FAM-W)is proposed.The performance of the FAM-W is compared with analytical solutions,Finite Difference Method(FDM),and Finite Analytic Method based on the pressure Head-based Richards'equation(FAM-H).Compared to analytical solution and other numerical methods(FDM and FAM-H),FAM-W demonstrates superior accuracy and efficiency in controlling mass balance errors,regardless of spatial step sizes.This study introduces a novel approach for modelling water flow in the vadose zone,offering significant benefits for water resources management.
基金Supported by Shanxi Province Natural Science Research(202203021212249)Special/Youth Foundation of Taiyuan University of Technology(2022QN101)+3 种基金National Natural Science Foundation of China(12301556)Research Project Supported by Shanxi Scholarship Council of China(2021-029)International Cooperation Base and Platform Project of Shanxi Province(202104041101019)Basic Research Plan of Shanxi Province(202203021211129)。
文摘To enhance the computational efficiency of spatio-temporally discretized phase-field models,we present a high-speed solver specifically designed for the Poisson equations,a component frequently used in the numerical computation of such models.This efficient solver employs algorithms based on discrete cosine transformations(DCT)or discrete sine transformations(DST)and is not restricted by any spatio-temporal schemes.Our proposed methodology is appropriate for a variety of phase-field models and is especially efficient when combined with flow field systems.Meanwhile,this study has conducted an extensive numerical comparison and found that employing DCT and DST techniques not only yields results comparable to those obtained via the Multigrid(MG)method,a conventional approach used in the resolution of the Poisson equations,but also enhances computational efficiency by over 90%.
基金the National Natural Science Foundation of China(No.11672238)the 111 Project(No.BP0719007)the Shaanxi Province Natural Science Foundation(No.2020JZ-06)for the financial support.
文摘A modified inner-element edge-based smoothed finite element method(IES-FEM)is developed and integrated with ABAQUS using a user-defined element(UEL)in this study.Initially,the smoothing domain discretization of IES-FEM is described and compared with ES-FEM.A practical modification of IES-FEM is then introduced that used the technique employed by ES-FEM for the nodal strain calculation.The differences in the strain computation among ES-FEM,IES-FEM,and FEM are then discussed.The modified IES-FEM exhibited superior performance in displacement and a slight advantage in stress compared to FEM using the same mesh according to the results obtained from both the regular and irregular elements.The robustness of the IES-FEM to severely deformed meshes was also verified.
基金supported by the National Natural Science Foundation of China (Grant Nos.U2341244,12172179,11772160)。
文摘This study presents a theoretical analysis of the perforation process of finite-thickness metal plates(with a thickness ratio of T_0/D = 0.6–1.5) under normal impact by spherical-nosed projectiles. The model is validated over an impact velocity range of 180–1247 m/s. The entire penetration process is divided into three stages: the crater formation stage, the steady stage, and the shear stage. A thicknessdependent dynamic cavity expansion resistance model is first introduced to quantitatively describe the axial resistance experienced by the projectile during the tip-entry and steady stages. Subsequently, a thickness-related damage parameter is proposed to refine the resistance expression during the transition from the steady stage to the shear stage, thereby eliminating discontinuities in resistance across stages. When the projectile fully perforates the target, the model predicts a gradual decay of resistance to zero as the residual ligament thickness vanishes, which better reflects the actual physical behavior. The model is validated using four sets of experimental conditions. In addition, to illustrate the model's applicability more intuitively, a numerical simulation case from the literature is reproduced, and the resulting resistance-time curve is compared with the model output. The results demonstrate that the proposed model agrees well with experimental data in terms of residual velocity, ballistic limit, and penetration resistance. Finally, a method for adjusting the threshold parameter within the resistance function is provided, and the influence of this coefficient on the model predictions is discussed.
基金supported by the National Key R and D Program of China(2020YFA0713100)the National Natural Science Foundation of China(12271039)the Open Project Program(K202303)of Key Laboratory of Mathematics and Complex Systems,Beijing Normal University。
文摘In this paper,we investigate the Sobolev spaces W^(1,p)(V)and W_(0)^(1,p)(V)on a locally finite graph G=(V,E),which are fundamental tools when we apply the variational methods to partial differential equations on graphs.As a key contribution of this note,we show that in general,W^(1,p)(V)≠W_(0)^(1,p)(V)on locally finite graphs,which is different from the situation on Euclidean space RN.
基金supported by the National Natural Science Foundation of China(No.42277175)Guangxi Emergency Management Department 2024 Innovation and Technology Research Project,China(No.2024GXYJ006)+2 种基金Hunan Provincial Department of Natural Resources Geological Exploration Project,China(No.2023ZRBSHZ056)The First National Natural Disaster Comprehensive Risk Survey in Hunan Province,China(No.2022-70)Guizhou Provincial Major Scientific and Technological Program,China(No.2023-425).
文摘A method combining finite difference method(FDM)and k-means clustering algorithm which can determine the threshold of rock bridge generation is proposed.Jointed slope models with different joint coalescence coefficients(k)are constructed based on FDM.The rock bridge area was divided through k-means algorithm and the optimal number of clusters was determined by sum of squared errors(SSE)and elbow method.The influence of maximum principal stress and stress change rate as clustering indexes on the clustering results of rock bridges was compared by using Euclidean distance.The results show that using stress change rate as clustering index is more effective.When the joint coalescence coefficient is less than 0.6,there is no significant stress concentration in the middle area of adjacent joints,that is,no generation of rock bridge.In addition,the range of rock bridge is affected by the coalescence coefficient(k),the relative position of joints and the parameters of weak interlayer.
文摘As a key national project,a newly built plateau railway features a large proportion of tunnels and high construction difficulty.To reduce the voids in the secondary lining of tunnels and address issues such as ineffective vibration of the vault,vault voiding,and the inability to monitor the casting status during tunnel lining construction with ordinary lining trolleys,a new smart lining trolley with large clearance that integrates functions such as vibration,automatic casting,and pressure monitoring has been developed.This was achieved by combining the functional design of the new smart lining trolley,comparing traditional construction techniques,and introducing information-based and intelligent design concepts.Through simulation calculations using finite element software modeling,it is verified that the structural stiffness,strength,and other performance parameters of the smart lining trolley meet the technical design requirements.
基金supported by the National Natural Science Foundation of China(No.52278251)Guizhou Provincial Sciences and Technology Projects(ZK[2022]Key 007).
文摘Identifying the damage and fracture properties of nuclear graphite materials and accurately simulating them are crucial when designing graphite core structures.To simulate the damage evolution and crack propagation of graphite under stress in a finite element model,compression tests on disks and three-point bending tests on center-notched beams for fine-grained graphite(CDI-1D and IG11 graphite)were conducted.During these tests,digital image correlation and electronic speckle pattern interferometry techniques were utilized to observe the surface full-field displacements of the specimens.A segmented finite element inverse analysis method was developed to characterize the graphite’s damage evolution by quantifying the reduction in Young’s modulus with tensile and compressive strains in disk specimens.The fracture energy and bilinear tensile softening curve of the graphite were determined by comparing the load–displacement responses of the three-point bending tests and the finite element simulation.Finally,by combining the identified damage laws with a fracture criterion based on fracture energy,a damage–fracture model was established and used to simulate tensile tests on L-shaped specimens with different fillet radii.Simulations indicate that the damage area at the fillet expands with increasing radius,creating a blunting effect that enhances the load-bearing capacity of the specimens.This damage–fracture model can be applied to simulate graphite components in core structures.
基金supported by the National Natural Science Foundation of China(Nos.12422208,12432011,12421002,and 12372220)。
文摘This study generalizes the classical Taylor-Sedov framework to analyze finitesource spherical blast waves propagating through both uniform and power-law density media. Previous analyses have predominantly focused on the effects of varying initial conditions on blast dynamics. In contrast, this study investigates the primary shock wave evolution within different ambient gases, demonstrating the critical dependence on the initial density ratio between the blast sphere and the ambient medium, as well as the ambient density profile. We derive new scaling laws based on the density ratio, which accurately predict the dimensionless main shock distance. Furthermore, we systematically examine, for the first time, the conditions for uniform volume expansion, uniform surface area growth, and uniform shock wave propagation in power-law density media, revealing a key scaling relation associated with the power-law exponent. Numerical simulations validate these novel theoretical predictions, demonstrating excellent agreement with the normalized solutions. These findings provide new insights into blast wave dynamics in inhomogeneous media and have implications for astrophysical and laboratory plasma environments.
文摘To effectively address the challenge where the speed of tunnel lining construction struggles to match that of tunnel face and inverted arch construction,and to enhance the quality of secondary lining,a new type of skeleton-free,traversing secondary lining trolley has been developed.This trolley features a set of gantries paired with two sets of formwork.The formwork adopts a multi-segment hinged and strengthened design,ensuring its own strength can meet the requirements of secondary lining concrete pouring without relying on the support of the gantries.When retracted,the formwork can be transported by the gantries through another set of formwork in the supporting state,enabling early formwork support,effectively accelerating the construction progress of the tunnel’s secondary lining,and extending the maintenance time of the secondary lining with the formwork.Finite element software modeling was used for simulation calculations,and the results indicate that the structural strength,stiffness,and other performance parameters of the new secondary lining trolley meet the design requirements,verifying the rationality of the design.
