With the rapid integration of renewable energy sources,modern power systems are increasingly challenged by heightened volatility and uncertainty.Doubly-fed variable-speed pumped storage units(DFVS-PSUs)have emerged as...With the rapid integration of renewable energy sources,modern power systems are increasingly challenged by heightened volatility and uncertainty.Doubly-fed variable-speed pumped storage units(DFVS-PSUs)have emerged as promising technologies for mitigating grid oscillations and enhancing system flexibility.However,the excitation converters in DFVS-PSUs are prone to significant issues such as elevated common-mode voltage(CMV)and neutral-point voltage(NPV)fluctuations,which can lead to electromagnetic interference and degrade transient performance.To address these challenges,an optimized virtual space vector pulse width modulation(OVSVPWM)strategy is proposed,aiming to suppress CMV and NPV simultaneously through coordinated multi-objective control.Specifically,a dynamic feedback mechanism is introduced to adjust the balancing factor of basic vectors in the synthesized virtual small vector in real-time,achieving autonomous balancing of the NPV.To address the excessive switching actions introduced by the OVSVPWM strategy,a phase duty ratio-based sequence reconstruction method is adopted,which reduces the total number of switching actions to half of the original.A zero-level buffering scheme is employed to reconstruct the single-phase voltage-level output sequence,achieving peak CMV suppression down to udc/6.Simulation results demonstrate that the proposed strategy significantly improves electromagnetic compatibility and operational stability while maintaining high power quality.展开更多
In this paper,the torque ripple problem of six-phase asymmetrical brushless DC motor(BLDCM)is studied.First,the basic structure of BLDCM is introduced,and the operation principle of six-phase asymmetrical BLDCM that i...In this paper,the torque ripple problem of six-phase asymmetrical brushless DC motor(BLDCM)is studied.First,the basic structure of BLDCM is introduced,and the operation principle of six-phase asymmetrical BLDCM that is studied in the thesis is expounded.Then,the principle of direct torque control(DTC)system of BLDCM is also discussed,and the improved system is proposed,including using the torque hysteresis loop and opening current hysteresis loop,and choosing the improved voltage vector to make the PWM-ON-PWM modulation.Finally,the DTC system simulation model is built,and the system is also tested by the experiment.According to the results of experiment and simulation,the DTC system designed in this thesis can control the six-phase asymmetrical BLDCM stably and reliably,and the problem of high frequency and torque ripple is solved well.展开更多
Diode clamped multi-level inverter （DCMLI） has a wide application prospect in high-voltage and adjustable speed drive systems due to its low stress on switching devices, low harmonic output, and simple structure. Ho...Diode clamped multi-level inverter （DCMLI） has a wide application prospect in high-voltage and adjustable speed drive systems due to its low stress on switching devices, low harmonic output, and simple structure. However, the problem of complexity of selecting vectors and capacitor voltage unbalance needs to be solved when the algorithm of direct torque control （DTC） is implemented on DCMLI. In this paper, a fuzzy DTC system of an induction machine fed by a three-level neutral-point-clamped （NPC） inverter is proposed. After introducing fuzzy logic, optimal selecting switching state is realized by applying various strategies which can distinguish the grade of the errors of stator flux linkage, torque, the neutral-point potential, and the position of stator flux linkage. Consequently, the neutral-point potential unbalance, the dr/dr of output voltage and the switching loss are restrained effectively, and desirable dynamic and steady-state performances of induction machines can be obtained for the DTC scheme. A design method of the fuzzy controller is introduced in detail, and the relevant simulation and experimental results have verified the feasibility of the proposed control algorithm.展开更多
ZVS（zero voltage switching） PWM（pulse width modulation） inverters have attracted much attention recently. The basic idea is to use ZVS circuit as the main circuit of inverter resonance at the beginning of every ca...ZVS（zero voltage switching） PWM（pulse width modulation） inverters have attracted much attention recently. The basic idea is to use ZVS circuit as the main circuit of inverter resonance at the beginning of every carrier period so that each power device can commutate when voltage of the main circuit＇s DC bus line is zero. To ensure the resonant circuit to operate properly, sawtooth with alternate slope （positive or negative） is used as carrier. But the time of zero voltage vectors with such PWM pattern is greatly different from traditional hard-switching PWM pattern. This paper discusses the locus of flux linkage under soft-switching PWM pattern by using space voltage vector. It is pointed out that, under the hard-switching PWM pattern, speed of flux linkage is adjusted by zero space voltage vector. When soft-switching PWM pattern is used, however, effective time of space voltage vector varies considerably, sometimes even without zero space voltage vector. Therefore non-zero space voltage vector has been used to make the speed of flux linkage locus equal to that of hard-switching PWM pattern. The cause of current distortion in soft-switching PWM inverters is also discussed. Based on the flux linkage locus circle, corresponding compensation methods are proposed. Experimental results show that the described method can effectively improve output current waveform of inverter.展开更多
The output current harmonic distortion of a three-level inverter is less than the traditional twolevel inverter.The voltage stress of the semiconductor switch is low.A neutral point potential drift control method is p...The output current harmonic distortion of a three-level inverter is less than the traditional twolevel inverter.The voltage stress of the semiconductor switch is low.A neutral point potential drift control method is proposed to solve the problem of the neutral point potential drift of the three-level inverter.The interaction mechanism between the neutral point potential and the space voltage vector is presented.The small vector output by the inverter is found to be the root cause of the midpoint potential drift.It is found that the fluctuation of the midpoint potential could be suppressed by increasing the capacitance value of the inverter bus voltage stabilizing capacitor.Furthermore,it inhibits the fluctuation of the midpoint potential.The experimental results verify the efficiency and precision of the proposed method.展开更多
文摘With the rapid integration of renewable energy sources,modern power systems are increasingly challenged by heightened volatility and uncertainty.Doubly-fed variable-speed pumped storage units(DFVS-PSUs)have emerged as promising technologies for mitigating grid oscillations and enhancing system flexibility.However,the excitation converters in DFVS-PSUs are prone to significant issues such as elevated common-mode voltage(CMV)and neutral-point voltage(NPV)fluctuations,which can lead to electromagnetic interference and degrade transient performance.To address these challenges,an optimized virtual space vector pulse width modulation(OVSVPWM)strategy is proposed,aiming to suppress CMV and NPV simultaneously through coordinated multi-objective control.Specifically,a dynamic feedback mechanism is introduced to adjust the balancing factor of basic vectors in the synthesized virtual small vector in real-time,achieving autonomous balancing of the NPV.To address the excessive switching actions introduced by the OVSVPWM strategy,a phase duty ratio-based sequence reconstruction method is adopted,which reduces the total number of switching actions to half of the original.A zero-level buffering scheme is employed to reconstruct the single-phase voltage-level output sequence,achieving peak CMV suppression down to udc/6.Simulation results demonstrate that the proposed strategy significantly improves electromagnetic compatibility and operational stability while maintaining high power quality.
基金This work was supported in part by the National Natural Science Foundation of China under Grant61773006。
文摘In this paper,the torque ripple problem of six-phase asymmetrical brushless DC motor(BLDCM)is studied.First,the basic structure of BLDCM is introduced,and the operation principle of six-phase asymmetrical BLDCM that is studied in the thesis is expounded.Then,the principle of direct torque control(DTC)system of BLDCM is also discussed,and the improved system is proposed,including using the torque hysteresis loop and opening current hysteresis loop,and choosing the improved voltage vector to make the PWM-ON-PWM modulation.Finally,the DTC system simulation model is built,and the system is also tested by the experiment.According to the results of experiment and simulation,the DTC system designed in this thesis can control the six-phase asymmetrical BLDCM stably and reliably,and the problem of high frequency and torque ripple is solved well.
文摘Diode clamped multi-level inverter （DCMLI） has a wide application prospect in high-voltage and adjustable speed drive systems due to its low stress on switching devices, low harmonic output, and simple structure. However, the problem of complexity of selecting vectors and capacitor voltage unbalance needs to be solved when the algorithm of direct torque control （DTC） is implemented on DCMLI. In this paper, a fuzzy DTC system of an induction machine fed by a three-level neutral-point-clamped （NPC） inverter is proposed. After introducing fuzzy logic, optimal selecting switching state is realized by applying various strategies which can distinguish the grade of the errors of stator flux linkage, torque, the neutral-point potential, and the position of stator flux linkage. Consequently, the neutral-point potential unbalance, the dr/dr of output voltage and the switching loss are restrained effectively, and desirable dynamic and steady-state performances of induction machines can be obtained for the DTC scheme. A design method of the fuzzy controller is introduced in detail, and the relevant simulation and experimental results have verified the feasibility of the proposed control algorithm.
基金Project supported by Shanghai Leading AcademicDisciplineProject (Grant No .T0103) ,and Shanghai Post Doctoral ScientificResearch Project (Grant No .05R214122)
文摘ZVS（zero voltage switching） PWM（pulse width modulation） inverters have attracted much attention recently. The basic idea is to use ZVS circuit as the main circuit of inverter resonance at the beginning of every carrier period so that each power device can commutate when voltage of the main circuit＇s DC bus line is zero. To ensure the resonant circuit to operate properly, sawtooth with alternate slope （positive or negative） is used as carrier. But the time of zero voltage vectors with such PWM pattern is greatly different from traditional hard-switching PWM pattern. This paper discusses the locus of flux linkage under soft-switching PWM pattern by using space voltage vector. It is pointed out that, under the hard-switching PWM pattern, speed of flux linkage is adjusted by zero space voltage vector. When soft-switching PWM pattern is used, however, effective time of space voltage vector varies considerably, sometimes even without zero space voltage vector. Therefore non-zero space voltage vector has been used to make the speed of flux linkage locus equal to that of hard-switching PWM pattern. The cause of current distortion in soft-switching PWM inverters is also discussed. Based on the flux linkage locus circle, corresponding compensation methods are proposed. Experimental results show that the described method can effectively improve output current waveform of inverter.
基金the National Natural Science Foundation of China(No.51407007)。
文摘The output current harmonic distortion of a three-level inverter is less than the traditional twolevel inverter.The voltage stress of the semiconductor switch is low.A neutral point potential drift control method is proposed to solve the problem of the neutral point potential drift of the three-level inverter.The interaction mechanism between the neutral point potential and the space voltage vector is presented.The small vector output by the inverter is found to be the root cause of the midpoint potential drift.It is found that the fluctuation of the midpoint potential could be suppressed by increasing the capacitance value of the inverter bus voltage stabilizing capacitor.Furthermore,it inhibits the fluctuation of the midpoint potential.The experimental results verify the efficiency and precision of the proposed method.
