The hybrid CO_(2) thermal technique has achieved considerable success globally in extracting residual heavy oil from reserves following a long-term steam stimulation process.Using microscopic visualization experiments...The hybrid CO_(2) thermal technique has achieved considerable success globally in extracting residual heavy oil from reserves following a long-term steam stimulation process.Using microscopic visualization experiments and molecular dynamics(MD)simulations,this study investigates the microscopic enhanced oil recovery(EOR)mechanisms underlying residual oil removal using hybrid CO_(2) thermal systems.Based on the experimental models for the occurrence of heavy oil,this study evaluates the performance of hybrid CO_(2) thermal systems under various conditions using MD simulations.The results demonstrate that introducing CO_(2) molecules into heavy oil can effectively penetrate and decompose dense aggregates that are originally formed on hydrophobic surfaces.A stable miscible hybrid CO_(2) thermal system,with a high effective distribution ratio of CO_(2),proficiently reduces the interaction energies between heavy oil and rock surfaces,as well as within heavy oil.A visualization analysis of the interactions reveals that strong van der Waals(vdW)attractions occur between CO_(2) and heavy oil molecules,effectively promoting the decomposition and swelling of heavy oil.This unlocks the residual oil on the hydrophobic surfaces.Considering the impacts of temperature and CO_(2) concentration,an optimal gas-to-steam injection ratio(here,the CO_(2):steam ratio)ranging between 1:6 and 1:9 is recommended.This study examines the microscopic mechanisms underlying the hybrid CO_(2) thermal technique at a molecular scale,providing a significant theoretical guide for its expanded application in EOR.展开更多
An improved three-dimensional （3-D） experimental visualization methodology is presented tor evaluating the fracture mechanisms of ferritic stainless steels by in-situ tensile testing with an environmental scanning e...An improved three-dimensional （3-D） experimental visualization methodology is presented tor evaluating the fracture mechanisms of ferritic stainless steels by in-situ tensile testing with an environmental scanning electron microscope （ESEM）. The samples were machined with a radial notched shape and a sloped surface. Both planar surface deformation and sloping surface deformation-induced microvoids were observed during dynamic tension experiments, where a greater amount of information could be obtained from the sloping surface. The results showed that microvoids formed at the grain boundaries of highly elongated large grains. The microvoids nucleated in the severely deformed regions grew nearly parallel to the tensile axis, predominantly along the grain boundaries. The microvoids nucleated at the interface of particles and the matrix did not propagate due to the high plasticity of the matrix. The large microvoids propagated and showed a zigzag shape along the grain boundaries,seemingly a consequence of the fracture of the slip bands caused by dislocation pile-ups. The final failure took place due to the reduction of the load-beating area.展开更多
Based on a depth-averaged 2D numerical river model, the flow and sediment movement downstream of the Cuijiaying dam Hanjiang River（China） are investigated. A new technique is employed to achieve synchronous dynamic ...Based on a depth-averaged 2D numerical river model, the flow and sediment movement downstream of the Cuijiaying dam Hanjiang River（China） are investigated. A new technique is employed to achieve synchronous dynamic visualization of topography and velocity field. The calculating results can reflect the relationship between flow and corresponding topography.展开更多
In this article, we present a three-dimensional visualization technique that has been developed in order to establish an interactive immersive environment to visualize the particles in granular materials and dislocati...In this article, we present a three-dimensional visualization technique that has been developed in order to establish an interactive immersive environment to visualize the particles in granular materials and dislocations in crystals. Simple elementary objects often exhibit complex collective behavior. Understanding of such behaviors and developments of coarse-scale theories, often requires insight into collective behavior that can only be obtained through immersive visualization. By displaying the computational results in a virtual environment with three-dimensional perception, one can immerse inside the model and analyze the intricate and very complex behavior of individual particles and dislocations. We built the stereographic images of the models using OpenGL rendering technique and then combine with the Virtual Reality technology in order to immerse in the three-dimensional model. A head mounted display has been used to allow the user to immerse inside the models and a flock of birds tracking device that allows the movements around and within the immersive environment.展开更多
Any tidal defense engineering involves the collection and analysis of massive information about engineering structures and their surrounding environment. Traditional method, which is carried out mainly by means of two...Any tidal defense engineering involves the collection and analysis of massive information about engineering structures and their surrounding environment. Traditional method, which is carried out mainly by means of twodimensional drawings and textures, is not efficient and intuitive enough to analyze the whole project and reflect its spatial relationship. Three-dimensional visual simulation provides an advanced technical means of solving this problem. In this paper, triangular irregular network (TIN) model simplified by non-uniform rational B-splines (NURBS) technique was used to establish the digital terrain model (DTM) of a super large region. Simulation of dynamic water surface was realized by combining noise function with sine wave superposition method. Models of different objects were established with different modeling techniques according to their characteristics. Application of texture mapping technology remarkably improved the authenticity of the models. Taking the tidal defense engineering in the new coastal region of Tianjin as a case study, three-dimensional visual simulation and dynamic roaming of the study area were realized, providing visual analysis and visible demonstration method for the management and emergency decision-making associated with construction.展开更多
To improve fishing gear efficiency, it is important to understand the interactions among sea current, fishing vessel, line hauler, and catches during pelagic longline gear retrieval. In this study, fishing gear config...To improve fishing gear efficiency, it is important to understand the interactions among sea current, fishing vessel, line hauler, and catches during pelagic longline gear retrieval. In this study, fishing gear configuration parameters, operational parameters, and 3 D ocean current data were collected from Indian Ocean. Dynamic models of pelagic longline gear retrieval were built using the lumped mass method and solved using the Euler-Trapezoidal method. From the results, the pulling force of line hauler exerted on the gear was 2800–3600 N. There were no significant differences(P > 0.05) between the time of the hook retrieval measured at sea and that obtained from the simulation. The absolute values of the movement velocity at representative nodes along the X, Y, and Z axes were 0.01–25.5 m s^(-1). These results suggest that the dynamic model of longline fishing gear retrieval can be used to analyze the interactions among sea current, fishing vessel, line hauler, longline gear, and catches, and to acquire the basic data for optimizing the design of the line hauler. Moreover, the model can serve as a reference to study the hydrodynamic performance of other fishing gears during the hauling process.展开更多
To study the airflow distribution in human nasal cavity during respiration and the characteristic parameters of nasal structure, three-dimensional, anatomically accurate representations of 30 adult nasal cavity models...To study the airflow distribution in human nasal cavity during respiration and the characteristic parameters of nasal structure, three-dimensional, anatomically accurate representations of 30 adult nasal cavity models were recons- tructed based on processed tomography images collected from normal people. The airflow fields in nasal cavities were simulated by fluid dynamics with finite element software ANSYS. The results showed that the difference of human nasal cavity structure led to different airflow distribution in the nasal cavities and variation of the main airstream passing through the common nasal meatus. The nasal resistance in the regions of nasal valve and nasal vestibule accounted for more than half of the overall resistance. The characteristic model of nasal cavity was extracted on the basis of characteristic points and dimensions deduced from the original models. It showed that either the geometric structure or the airflow field of the two kinds of models was similar. The characteristic dimensions were the characteristic parameters of nasal cavity that could properly represent the original model in model studies on nasal cavity.展开更多
Carbon dioxide(CO2),the main gas emitted from fossil burning,is the primary contributor to global warming.Circulating fluidized bed reactor(CFBR)is proved as an energy-efficient method for post-combustion CO2 capture....Carbon dioxide(CO2),the main gas emitted from fossil burning,is the primary contributor to global warming.Circulating fluidized bed reactor(CFBR)is proved as an energy-efficient method for post-combustion CO2 capture.The numerical simulation by computational fluid dynamics(CFD)is believed as a promising tool to study CO2 adsorption process in CFBR.Although three-dimensional(3D)simulations were proved to have better predicting performance with the experimental results,two-dimensional(2D)simulations have been widely reported for qualitative and quantitative studies on gas-solid behavior in CFBR for its higher computational efficiency recently.However,the discrepancies between 2D and 3D simulations have rarely been evaluated by detailed study.Considering that the differences between the 2D and 3D simulations will vary substantially with the changes of independent operating conditions,it is beneficial to lower computational costs to clarify the effects of dimensionality on the numerical CO2 adsorption runs under various operating conditions.In this work,the comparative analysis for CO2 adsorption in 2D and 3D simulations was conducted to enlighten the effects of dimensionality on the hydrodynamics and reaction behaviors,in which the separation rate,species distribution and hydrodynamic characteristics were comparatively studied for both model frames.With both accuracy and computational costs considered,the viable suggestions were provided in selecting appropriate model frame for the studies on optimization of operating conditions,which directly affect the capture and energy efficiencies of cyclic CO2 capture process in CFBR.展开更多
A micro-nano pore three-dimensional visualized real-time physical simulation of natural gas charging, in-situ pore-scale computation, pore network modelling, and apparent permeability evaluation theory were used to in...A micro-nano pore three-dimensional visualized real-time physical simulation of natural gas charging, in-situ pore-scale computation, pore network modelling, and apparent permeability evaluation theory were used to investigate laws of gas and water flow and their distribution, and controlling factors during the gas charging process in low-permeability(tight) sandstone reservoir. By describing features of gas-water flow and distribution and their variations in the micro-nano pore system, it is found that the gas charging in the low permeability(tight) sandstone can be divided into two stages, expansion stage and stable stage. In the expansion stage, the gas flows continuously first into large-sized pores then small-sized pores, and first into centers of the pores then edges of pores;pore-throats greater than 20 μm in radius make up the major pathway for gas charging. With the increase of charging pressure, movable water in the edges of large-sized pores and in the centers of small pores is displaced out successively. Pore-throats of 20-50 μm in radius and pore-throats less than 20 μm in radius dominate the expansion of gas charging channels at different stages of charging in turn, leading to reductions in pore-throat radius, throat length and coordination number of the pathway, which is the main increase stage of gas permeability and gas saturation. Among which, pore-throats 30-50 μm in radius control the increase pattern of gas saturation. In the stable stage, gas charging pathways have expanded to the maximum, so the pathways keep stable in pore-throat radius, throat length, and coordination number, and irreducible water remains in the pore system, the gas phase is in concentrated clusters, while the water phase is in the form of dispersed thin film, and the gas saturation and gas permeability tend stable. Connected pore-throats less than 20 μm in radius control the expansion limit of the charging pathways, the formation of stable gas-water distribution, and the maximum gas saturation. The heterogeneity of connected pore-throats affects the dynamic variations of gas phase charging and gas-water distribution. It can be concluded that the pore-throat configuration and heterogeneity of the micro-nanometer pore system control the dynamic variations of the low-permeability(tight) sandstone gas charging process and gas-water distribution features.展开更多
The dynamic multichannel binocular visual image modeling is studied based on Internet of Things (IoT) Perception Layer, using mobile robot self-organizing network. By employing multigroup mobile robots with binocular ...The dynamic multichannel binocular visual image modeling is studied based on Internet of Things (IoT) Perception Layer, using mobile robot self-organizing network. By employing multigroup mobile robots with binocular visual system, the real visual images of the object will be obtained. Then through the mobile self-organizing network, a three-dimensional model is rebuilt by synthesizing the returned images. On this basis, we formalize a novel algorithm for multichannel binocular visual three-dimensional images based on fast three-dimensional modeling. Compared with the method based on single binocular visual system, the new algorithm can improve the Integrity and accuracy of the dynamic three-dimensional object modeling. The simulation results show that the new method can effectively accelerate the modeling speed, improve the similarity and not increase the data size.展开更多
This paper was to develop a model for simulating the leaf color changes in rice （Oryza sativa L.） based on RGB （red, green, and blue） values. Based on rice experiment data with different cultivars and nitrogen （N...This paper was to develop a model for simulating the leaf color changes in rice （Oryza sativa L.） based on RGB （red, green, and blue） values. Based on rice experiment data with different cultivars and nitrogen （N） rates, the time-course RGB values of each leaf on main stem were collected during the growth period in rice, and a model for simulating the dynamics of leaf color in rice was then developed using quantitative modeling technology. The results showed that the RGB values of leaf color gradually decreased from the initial values （light green） to the steady values （green） during the first stage, remained the steady values （green） during the second stage, then gradually increased to the final values （from green to yellow） during the third stage. The decreasing linear functions, constant functions and increasing linear functions were used to simulate the changes in RGB values of leaf color at the first, second and third stages with growing degree days （GDD）, respectively; two cultivar parameters, MatRGB （leaf color matrix） and AR （a vector composed of the ratio of the cumulative GDD of each stage during color change process of leaf n to that during leaf n drawn under adequate N status）, were introduced to quantify the genetic characters in RGB values of leaf color and in durations of different stages during leaf color change, respectively; FN （N impact factor） was used to quantify the effects of N levels on RGB values of leaf color and on durations of different stages during leaf color change; linear functions were applied to simulate the changes in leaf color along the leaf midvein direction during leaf development process. Validation of the models with the independent experiment dataset exhibited that the root mean square errors （RMSE） between the observed and simulated RGB values were among 8 to 13, the relative RMSE （RRMSE） were among 8 to 10%, the mean absolute differences （da） were among 3.85 to 6.90, and the ratio of da to the mean observation values （Clap） were among 3.04 to 4.90%. In addition, the leaf color model was used to render the leaf color change over growth progress using the technology of visualization, with a good performance on predicting dynamic changes in rice leaf color. These results would provide a technical support for further developing virtual plant during rice growth and development.展开更多
With the development of computer graphics,the three-dimensional(3D)visualization brings new technological revolution to the traditional cartography.Therefore,the topographic 3D-map emerges to adapt to this technologic...With the development of computer graphics,the three-dimensional(3D)visualization brings new technological revolution to the traditional cartography.Therefore,the topographic 3D-map emerges to adapt to this technological revolution,and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage.The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology,so the research and development of topographic 3D-map will receive greater concern.The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model(DEM)and 3D-models of other DEM-based geographic features.In view of the potential enormous data and the complexity of geographic features,the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis.In addition to the equipment of hardware that are restraining,to a certain extent,the 3D representation,the data organization structure of geographic information will be the core problem of research on 3D-map.Level of detail(LOD),space partitioning,dynamic object loading(DOL)and object culling are core technologies of the dynamic 3D representation.The object-selection,attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system,all of which are based on the data structure of the 3D-model.This paper discusses the basic theories,concepts and cardinal principles of topographic 3D-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD,space partitioning,DOL and object culling.Moreover,such interactive operation functions are explored,in this paper,as spatial query,scene editing and management of topographic 3D-map.Finally,this paper describes briefly the applications of topographic 3D-map in its related fields.展开更多
Along with the development of computer techniques,the application of computer in three-dimensional visualization simulation of plant growth process has been paid more and more attention. Taking Cunninghamia lanceolata...Along with the development of computer techniques,the application of computer in three-dimensional visualization simulation of plant growth process has been paid more and more attention. Taking Cunninghamia lanceolata as an example, the morphological parameters from the perspective of the visual simulation were designed and the trees’ morphological characteristics were analyzed based on the survey data.Combined with IFS(Iterated Function System) under the control of the growth curve,by using Object-oriented design methods, and according to API and model rendering technology provided by DIRECTX9.0,a three-dimensional visualization system on the growth and development of C.lanceolata individual tree were developed on the.NET and DIRECTX9.0 platforms,which realized the static and dynamic three-dimensional visualization simulation.展开更多
Horizontal axis wind turbine(HAWT)often works under yaw due to the stochastic variation of wind direction.Yaw also can be used as one of control methods for load reduction and wake redirection of HAWT.Thus,the aerodyn...Horizontal axis wind turbine(HAWT)often works under yaw due to the stochastic variation of wind direction.Yaw also can be used as one of control methods for load reduction and wake redirection of HAWT.Thus,the aerodynamic performance under yaw is very important to the design of HAWT.For further insight into the highly unsteady characteristics aerodynamics of HAWT under yaw,this paper investigates the unsteady variations of the aerodynamic performance of a small wind turbine under static yawed and yawing process with sliding grid method,as well as the there-dimensional effect on the unsteady characteristics,using unsteady Reynolds-averaged Navier-Stokes(URANS)simulations.The simulation results are validated with experimental data and blade element momentum(BEM)results.The comparisons show that the CFD results have better agreement with the experimental data than both BEM results.The wind turbine power decreases according to a cosine law with the increase of yaw angle.The torque under yaw shows lower frequency fluctuations than the non-yawed condition due to velocity component of rotation and the influence of spinner.Dynamic yawing causes larger fluctuate than static yaw,and the reason is analyzed.The aerodynamic fluctuation becomes more prominent in the retreating side than that in the advancing side for dynamic yawing case.Variations of effective angle of attack and aerodynamic forces along the blade span are analyzed.The biggest loading position moves from middle span to outer span with the increase of yaw angle.Three-dimensional stall effect presents load fluctuations at the inner board of blade,and becomes stronger with the increase of yaw angle.展开更多
A computational particle fluid-dynamics model coupled with an energy-minimization multi-scale(EMMS)drag model was applied to investigate the influence of particle-size distribution on the hydrodynamics of a three-dime...A computational particle fluid-dynamics model coupled with an energy-minimization multi-scale(EMMS)drag model was applied to investigate the influence of particle-size distribution on the hydrodynamics of a three-dimensional full-loop circulating fluidized bed.Different particle systems,including one monodisperse and two polydisperse cases,were investigated.The numerical model was validated by comparing its results with the experimental axial voidage distribution and solid mass flux.The EMMS drag model had a high accuracy in the computational particle fluid-dynamics simulation of the three-dimensional full-loop circulating fluidized bed.The total number of parcels in the system(Np)influenced the axial voidage distribution in the riser,especially at the lower part of the riser.Additional numerical simulation results showed that axial segregation by size was predicted in the two polydisperse cases and the segregation size increased with an increase in the number of size classes.The axial voidage distribution at the lower portion of the riser was significantly influenced by particle-size distribution.However,radial segregation could only be correctly predicted in the upper region of the riser in the polydisperse case of three solid species.展开更多
Three-dimensional finite element models were developed to analyze 304 stainless steel rod and wire hot continuous rolling process with the help of MSC.Marc software. The entire 30-pass deformation process and the actu...Three-dimensional finite element models were developed to analyze 304 stainless steel rod and wire hot continuous rolling process with the help of MSC.Marc software. The entire 30-pass deformation process and the actual parameters of production line were taken into account. Static and dynamic procedures were used to study the continuous rolling process with the aid of the thermo-mechanical coupled FEM of elastic-plasticity. The properties of billets, such as deformation, temperature field and rolling force, were mainly discussed. The simulation results of temperature agree well with the measured values. Comparisons of the analysis results obtained using static implicit method and dynamic implicit method were presented. It is shown that static implicit procedure is more accurate than dynamic implicit procedure and is able to simulate the rolling process with a lower speed, such as a roughing mill. Whereas, dynamic analysis shows a higher efficiency than static analysis and is fit for simulating the rolling process with a higher speed, such as a finishing mill.展开更多
A comprehensive understanding of the sediment behavior at the entrance of diversion channels requires complete knowledge of threedimensional(3 D) flow behavior around such structures. Dikes and submerged vanes are typ...A comprehensive understanding of the sediment behavior at the entrance of diversion channels requires complete knowledge of threedimensional(3 D) flow behavior around such structures. Dikes and submerged vanes are typical structures used to control sediment entrainment in the diversion channel. In this study, a 3 D computational fluid dynamic(CFD) code was calibrated with experimental data and used to evaluate flow patterns, the diversion ratio of discharge, the strength of secondary flow, and dimensions of the vortex inside the channel in various dike and submerged vane installation scenarios. Results show that the diversion ratio of discharge in the diversion channel is dependent on the width of the flow separation plate in the main channel. A dike perpendicular to the flow with a narrowing ratio of 0.20 doubles the ratio of diverted discharge in addition to reducing suspended sediment input to the basin, compared with a no-dike situation, by creating the outer arch conditions. A further increase in the narrowing ratio decreases the diverted discharge. In addition, increasing the longitudinal distance between consecutive vanes(Ls) increases the velocity gradient between the vanes and leads to a more severe erosion of the bed, near the vanes.展开更多
Liquid argon flow along a nanochannel is studied using molecular dynamics (MD) simulation in this work.Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) is used as the MD simulator.The effects of redu...Liquid argon flow along a nanochannel is studied using molecular dynamics (MD) simulation in this work.Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) is used as the MD simulator.The effects of reduced forces at 0.5,1.0 and 2.0 on argon flow on system energy in the form of system potential energy,pressure and velocity profile are described.Output in the form of three-dimensional visualization of the system at steady-state condition using Visual Molecular Dynamics (VMD) is provided to describe the dynamics of the argon atoms.The equilibrium state is reached after 16000 time steps.The effects on system energy,pressure and velocity profile due to reduced force of 2.0 (F2) are clearly distinguishable from the other two lower forces where sufficiently high net force along the direction of the nanochannel for F2 renders the attractive and repulsive forces between the argon atoms virtually non-existent.A reduced force of 0.5 (F0.5) provides liquid argon flow that approaches Poiseuille (laminar) flow as clearly shown by the n-shaped average velocity profile.The extension of the present MD model to a more practical application affords scientists and engineers a good option for simulation of other nanofluidic dynamics processes.展开更多
Hydroelectric facilities impact water temperature; low velocities in a reservoir increase residence time and enhance heat exchange in surface layers. In this study, an unsteady three-dimensional model was developed to...Hydroelectric facilities impact water temperature; low velocities in a reservoir increase residence time and enhance heat exchange in surface layers. In this study, an unsteady three-dimensional model was developed to predict the temperatm＇e dynamics in the McNary Dam forebay. The model is based on the open-source code OpenFOAM. RANS equations with the Boussinesq approximation were used to solve the flow field. A： realizable k-ε model that accounts for the production of wind turbulence was developed. Solar radiation and convective heat transfer at the free surface were included. The result of the model was compared with the field data collected on August 18, 2004. Changes in diurnal stratification were adequately predicted by the model. Observed vertical and lateral temperature distributions were accurately captured. Results indicate that the model can be used as a numerical tool to assess structural and operational alternatives to reduce the forebay temperature.展开更多
Various types of geofluids exist in deep and ultra-deep layers in petroliferous basins.The geofluids are much more active under high-temperature and high-pressure(HTHP)conditions,but their properties are unclear.We si...Various types of geofluids exist in deep and ultra-deep layers in petroliferous basins.The geofluids are much more active under high-temperature and high-pressure(HTHP)conditions,but their properties are unclear.We simulated the mixing of different fluids in CH_(4)/C_(3)H_(8)/C_(6)H_(14)/C_(8)H_(18)-water systems and C_(6)H_(14)/C_(8)H_(18)-CO_(2)-H_(2)O systems at temperatures of 25℃ to 425℃ and pressures of 5 MPa to 105 MPa,using an in-situ micron quartz capillary tube thermal simulation system and molecular dynamics numerical simulation software.The mixing processes,patterns,and mechanisms of various fluids were analyzed at microscale under increasing temperature and pressure conditions.The results show that the miscibility of fluids in the different alkane-H_(2)O and alkane-CO_(2)-H_(2)O systems is not instantaneous,but the miscibility degree between different fluid phases increases as the temperature and pressure rise during the experiments.The physical thermal experiments(PTEs)show that the mixing process can be divided into three stages:initial miscibility,segmented dynamic miscibility,and complete miscibility.The molecular dynamics numerical simulations(MDNSs)indicate that the mixing process of fluids in the alkane-H_(2)O and alkane CO_(2)-H_(2)O systems can be divided into seven and eight stages,respectively.The carbon number affects the miscibility of alkanes and water,and the temperature and pressure required to reach the same miscibility stage with water increase with the carbon number(C_(3)H_(8),C_(6)H_(14),CH_(4),C_(8)H_(18)).CO_(2) has a critical bridge role in the miscibility of alkanes and water,and its presence significantly reduces the temperatures required to reach the initial,dynamic,and complete miscibility of alkanes and water.The results are of great significance for analyzing and understanding the miscibility of geofluids in deep and ultra-deep HTHP systems.展开更多
基金financially supported by the National Natural Science Foundation of China(No.U20B6003)the China Scholarship Council(No.202306440015)a project of the China Petroleum&Chemical Corporation(No.P22174)。
文摘The hybrid CO_(2) thermal technique has achieved considerable success globally in extracting residual heavy oil from reserves following a long-term steam stimulation process.Using microscopic visualization experiments and molecular dynamics(MD)simulations,this study investigates the microscopic enhanced oil recovery(EOR)mechanisms underlying residual oil removal using hybrid CO_(2) thermal systems.Based on the experimental models for the occurrence of heavy oil,this study evaluates the performance of hybrid CO_(2) thermal systems under various conditions using MD simulations.The results demonstrate that introducing CO_(2) molecules into heavy oil can effectively penetrate and decompose dense aggregates that are originally formed on hydrophobic surfaces.A stable miscible hybrid CO_(2) thermal system,with a high effective distribution ratio of CO_(2),proficiently reduces the interaction energies between heavy oil and rock surfaces,as well as within heavy oil.A visualization analysis of the interactions reveals that strong van der Waals(vdW)attractions occur between CO_(2) and heavy oil molecules,effectively promoting the decomposition and swelling of heavy oil.This unlocks the residual oil on the hydrophobic surfaces.Considering the impacts of temperature and CO_(2) concentration,an optimal gas-to-steam injection ratio(here,the CO_(2):steam ratio)ranging between 1:6 and 1:9 is recommended.This study examines the microscopic mechanisms underlying the hybrid CO_(2) thermal technique at a molecular scale,providing a significant theoretical guide for its expanded application in EOR.
文摘An improved three-dimensional （3-D） experimental visualization methodology is presented tor evaluating the fracture mechanisms of ferritic stainless steels by in-situ tensile testing with an environmental scanning electron microscope （ESEM）. The samples were machined with a radial notched shape and a sloped surface. Both planar surface deformation and sloping surface deformation-induced microvoids were observed during dynamic tension experiments, where a greater amount of information could be obtained from the sloping surface. The results showed that microvoids formed at the grain boundaries of highly elongated large grains. The microvoids nucleated in the severely deformed regions grew nearly parallel to the tensile axis, predominantly along the grain boundaries. The microvoids nucleated at the interface of particles and the matrix did not propagate due to the high plasticity of the matrix. The large microvoids propagated and showed a zigzag shape along the grain boundaries,seemingly a consequence of the fracture of the slip bands caused by dislocation pile-ups. The final failure took place due to the reduction of the load-beating area.
基金Project supported by the National Key Basic Research Development 973 Program of China (Grant No: 2003CB415200).
文摘Based on a depth-averaged 2D numerical river model, the flow and sediment movement downstream of the Cuijiaying dam Hanjiang River（China） are investigated. A new technique is employed to achieve synchronous dynamic visualization of topography and velocity field. The calculating results can reflect the relationship between flow and corresponding topography.
文摘In this article, we present a three-dimensional visualization technique that has been developed in order to establish an interactive immersive environment to visualize the particles in granular materials and dislocations in crystals. Simple elementary objects often exhibit complex collective behavior. Understanding of such behaviors and developments of coarse-scale theories, often requires insight into collective behavior that can only be obtained through immersive visualization. By displaying the computational results in a virtual environment with three-dimensional perception, one can immerse inside the model and analyze the intricate and very complex behavior of individual particles and dislocations. We built the stereographic images of the models using OpenGL rendering technique and then combine with the Virtual Reality technology in order to immerse in the three-dimensional model. A head mounted display has been used to allow the user to immerse inside the models and a flock of birds tracking device that allows the movements around and within the immersive environment.
基金Supported by Tianjin Research Program of Application Foundation and Advanced Technology (No.12JCZDJC29200)Foundation for Innovative Research Groups of National Natural Science Foundation of China (No.51021004)National Key Technology R&D Program in the 12th Five-Year Plan of China(No.2011BAB10B06)
文摘Any tidal defense engineering involves the collection and analysis of massive information about engineering structures and their surrounding environment. Traditional method, which is carried out mainly by means of twodimensional drawings and textures, is not efficient and intuitive enough to analyze the whole project and reflect its spatial relationship. Three-dimensional visual simulation provides an advanced technical means of solving this problem. In this paper, triangular irregular network (TIN) model simplified by non-uniform rational B-splines (NURBS) technique was used to establish the digital terrain model (DTM) of a super large region. Simulation of dynamic water surface was realized by combining noise function with sine wave superposition method. Models of different objects were established with different modeling techniques according to their characteristics. Application of texture mapping technology remarkably improved the authenticity of the models. Taking the tidal defense engineering in the new coastal region of Tianjin as a case study, three-dimensional visual simulation and dynamic roaming of the study area were realized, providing visual analysis and visible demonstration method for the management and emergency decision-making associated with construction.
基金funded by the National High Technology Research and Development Program of China (No. 2012 AA092302)the Specialized Research Fund for the Doctoral Program of Higher Education (No. 20113104110004)Shanghai Municipal Education Commission Innovation Project (No. 12ZZ168)
文摘To improve fishing gear efficiency, it is important to understand the interactions among sea current, fishing vessel, line hauler, and catches during pelagic longline gear retrieval. In this study, fishing gear configuration parameters, operational parameters, and 3 D ocean current data were collected from Indian Ocean. Dynamic models of pelagic longline gear retrieval were built using the lumped mass method and solved using the Euler-Trapezoidal method. From the results, the pulling force of line hauler exerted on the gear was 2800–3600 N. There were no significant differences(P > 0.05) between the time of the hook retrieval measured at sea and that obtained from the simulation. The absolute values of the movement velocity at representative nodes along the X, Y, and Z axes were 0.01–25.5 m s^(-1). These results suggest that the dynamic model of longline fishing gear retrieval can be used to analyze the interactions among sea current, fishing vessel, line hauler, longline gear, and catches, and to acquire the basic data for optimizing the design of the line hauler. Moreover, the model can serve as a reference to study the hydrodynamic performance of other fishing gears during the hauling process.
基金the National Natural Science Foundation of China (1047202510672036)the Natural Science Foundation of Liaoning Province,China (20032109)
文摘To study the airflow distribution in human nasal cavity during respiration and the characteristic parameters of nasal structure, three-dimensional, anatomically accurate representations of 30 adult nasal cavity models were recons- tructed based on processed tomography images collected from normal people. The airflow fields in nasal cavities were simulated by fluid dynamics with finite element software ANSYS. The results showed that the difference of human nasal cavity structure led to different airflow distribution in the nasal cavities and variation of the main airstream passing through the common nasal meatus. The nasal resistance in the regions of nasal valve and nasal vestibule accounted for more than half of the overall resistance. The characteristic model of nasal cavity was extracted on the basis of characteristic points and dimensions deduced from the original models. It showed that either the geometric structure or the airflow field of the two kinds of models was similar. The characteristic dimensions were the characteristic parameters of nasal cavity that could properly represent the original model in model studies on nasal cavity.
基金supported by the National Natural Science Foundation of China(21506181,21506179)Natural Science Foundation of Hunan Province(2020JJ3033,2019JJ40281,2018SK2027,2018RS3088,2019SK2112)+1 种基金Research Foundation of Education Bureau of Hunan Province(18B088)Hunan Key Laboratory of Environment Friendly Chemical Process Integration and Hunan 2011 Collaborative Innovation Center of Chemical Engineering&Technology with Environmental Benignity and Effective Resource Utilization,State Key Laboratory of High-efficiency Utilization of Coal and Green Chemical Engineering(2020-KF-11).
文摘Carbon dioxide(CO2),the main gas emitted from fossil burning,is the primary contributor to global warming.Circulating fluidized bed reactor(CFBR)is proved as an energy-efficient method for post-combustion CO2 capture.The numerical simulation by computational fluid dynamics(CFD)is believed as a promising tool to study CO2 adsorption process in CFBR.Although three-dimensional(3D)simulations were proved to have better predicting performance with the experimental results,two-dimensional(2D)simulations have been widely reported for qualitative and quantitative studies on gas-solid behavior in CFBR for its higher computational efficiency recently.However,the discrepancies between 2D and 3D simulations have rarely been evaluated by detailed study.Considering that the differences between the 2D and 3D simulations will vary substantially with the changes of independent operating conditions,it is beneficial to lower computational costs to clarify the effects of dimensionality on the numerical CO2 adsorption runs under various operating conditions.In this work,the comparative analysis for CO2 adsorption in 2D and 3D simulations was conducted to enlighten the effects of dimensionality on the hydrodynamics and reaction behaviors,in which the separation rate,species distribution and hydrodynamic characteristics were comparatively studied for both model frames.With both accuracy and computational costs considered,the viable suggestions were provided in selecting appropriate model frame for the studies on optimization of operating conditions,which directly affect the capture and energy efficiencies of cyclic CO2 capture process in CFBR.
基金Supported by the National Natural Science Foundation of China (41330319 and 42072174)Foundation of China University of Petroleum Beijing (2462020XKBH016)Fellowship of China Postdoctoral Science Foundation (2020M680030)。
文摘A micro-nano pore three-dimensional visualized real-time physical simulation of natural gas charging, in-situ pore-scale computation, pore network modelling, and apparent permeability evaluation theory were used to investigate laws of gas and water flow and their distribution, and controlling factors during the gas charging process in low-permeability(tight) sandstone reservoir. By describing features of gas-water flow and distribution and their variations in the micro-nano pore system, it is found that the gas charging in the low permeability(tight) sandstone can be divided into two stages, expansion stage and stable stage. In the expansion stage, the gas flows continuously first into large-sized pores then small-sized pores, and first into centers of the pores then edges of pores;pore-throats greater than 20 μm in radius make up the major pathway for gas charging. With the increase of charging pressure, movable water in the edges of large-sized pores and in the centers of small pores is displaced out successively. Pore-throats of 20-50 μm in radius and pore-throats less than 20 μm in radius dominate the expansion of gas charging channels at different stages of charging in turn, leading to reductions in pore-throat radius, throat length and coordination number of the pathway, which is the main increase stage of gas permeability and gas saturation. Among which, pore-throats 30-50 μm in radius control the increase pattern of gas saturation. In the stable stage, gas charging pathways have expanded to the maximum, so the pathways keep stable in pore-throat radius, throat length, and coordination number, and irreducible water remains in the pore system, the gas phase is in concentrated clusters, while the water phase is in the form of dispersed thin film, and the gas saturation and gas permeability tend stable. Connected pore-throats less than 20 μm in radius control the expansion limit of the charging pathways, the formation of stable gas-water distribution, and the maximum gas saturation. The heterogeneity of connected pore-throats affects the dynamic variations of gas phase charging and gas-water distribution. It can be concluded that the pore-throat configuration and heterogeneity of the micro-nanometer pore system control the dynamic variations of the low-permeability(tight) sandstone gas charging process and gas-water distribution features.
基金supported by HiTech Researchand Development Program of China under Grant No.2007AA10Z235
文摘The dynamic multichannel binocular visual image modeling is studied based on Internet of Things (IoT) Perception Layer, using mobile robot self-organizing network. By employing multigroup mobile robots with binocular visual system, the real visual images of the object will be obtained. Then through the mobile self-organizing network, a three-dimensional model is rebuilt by synthesizing the returned images. On this basis, we formalize a novel algorithm for multichannel binocular visual three-dimensional images based on fast three-dimensional modeling. Compared with the method based on single binocular visual system, the new algorithm can improve the Integrity and accuracy of the dynamic three-dimensional object modeling. The simulation results show that the new method can effectively accelerate the modeling speed, improve the similarity and not increase the data size.
基金the National High-Tech R&D Program of China(2013AA100404,2012AA101306-2)the Priority Academic Program Development of Jiangsu Higher Education Institutions of China(PAPD)
文摘This paper was to develop a model for simulating the leaf color changes in rice （Oryza sativa L.） based on RGB （red, green, and blue） values. Based on rice experiment data with different cultivars and nitrogen （N） rates, the time-course RGB values of each leaf on main stem were collected during the growth period in rice, and a model for simulating the dynamics of leaf color in rice was then developed using quantitative modeling technology. The results showed that the RGB values of leaf color gradually decreased from the initial values （light green） to the steady values （green） during the first stage, remained the steady values （green） during the second stage, then gradually increased to the final values （from green to yellow） during the third stage. The decreasing linear functions, constant functions and increasing linear functions were used to simulate the changes in RGB values of leaf color at the first, second and third stages with growing degree days （GDD）, respectively; two cultivar parameters, MatRGB （leaf color matrix） and AR （a vector composed of the ratio of the cumulative GDD of each stage during color change process of leaf n to that during leaf n drawn under adequate N status）, were introduced to quantify the genetic characters in RGB values of leaf color and in durations of different stages during leaf color change, respectively; FN （N impact factor） was used to quantify the effects of N levels on RGB values of leaf color and on durations of different stages during leaf color change; linear functions were applied to simulate the changes in leaf color along the leaf midvein direction during leaf development process. Validation of the models with the independent experiment dataset exhibited that the root mean square errors （RMSE） between the observed and simulated RGB values were among 8 to 13, the relative RMSE （RRMSE） were among 8 to 10%, the mean absolute differences （da） were among 3.85 to 6.90, and the ratio of da to the mean observation values （Clap） were among 3.04 to 4.90%. In addition, the leaf color model was used to render the leaf color change over growth progress using the technology of visualization, with a good performance on predicting dynamic changes in rice leaf color. These results would provide a technical support for further developing virtual plant during rice growth and development.
文摘With the development of computer graphics,the three-dimensional(3D)visualization brings new technological revolution to the traditional cartography.Therefore,the topographic 3D-map emerges to adapt to this technological revolution,and the applications of topographic 3D-map are spread rapidly to other relevant fields due to its incomparable advantage.The researches on digital map and the construction of map database offer strong technical support and abundant data source for this new technology,so the research and development of topographic 3D-map will receive greater concern.The basic data of the topographic 3D-map are rooted mainly in digital map and its basic model is derived from digital elevation model(DEM)and 3D-models of other DEM-based geographic features.In view of the potential enormous data and the complexity of geographic features,the dynamic representation of geographic information becomes the focus of the research of topographic 3D-map and also the prerequisite condition of 3D query and analysis.In addition to the equipment of hardware that are restraining,to a certain extent,the 3D representation,the data organization structure of geographic information will be the core problem of research on 3D-map.Level of detail(LOD),space partitioning,dynamic object loading(DOL)and object culling are core technologies of the dynamic 3D representation.The object-selection,attribute-query and model-editing are important functions and interaction tools for users with 3D-maps provided by topographic 3D-map system,all of which are based on the data structure of the 3D-model.This paper discusses the basic theories,concepts and cardinal principles of topographic 3D-map,expounds the basic way to organize the scene hierarchy of topographic 3D-map based on the node mechanism and studies the dynamic representation technologies of topographic 3D-map based on LOD,space partitioning,DOL and object culling.Moreover,such interactive operation functions are explored,in this paper,as spatial query,scene editing and management of topographic 3D-map.Finally,this paper describes briefly the applications of topographic 3D-map in its related fields.
文摘Along with the development of computer techniques,the application of computer in three-dimensional visualization simulation of plant growth process has been paid more and more attention. Taking Cunninghamia lanceolata as an example, the morphological parameters from the perspective of the visual simulation were designed and the trees’ morphological characteristics were analyzed based on the survey data.Combined with IFS(Iterated Function System) under the control of the growth curve,by using Object-oriented design methods, and according to API and model rendering technology provided by DIRECTX9.0,a three-dimensional visualization system on the growth and development of C.lanceolata individual tree were developed on the.NET and DIRECTX9.0 platforms,which realized the static and dynamic three-dimensional visualization simulation.
基金the National Natural Science Foundation of China(Grants 51876063 and 51576065)the Science and Technology Project of Huaneng Group(Grant HNKJ18-H33)on research and demonstration application of onshore wind energy efficiency improvement technology.
文摘Horizontal axis wind turbine(HAWT)often works under yaw due to the stochastic variation of wind direction.Yaw also can be used as one of control methods for load reduction and wake redirection of HAWT.Thus,the aerodynamic performance under yaw is very important to the design of HAWT.For further insight into the highly unsteady characteristics aerodynamics of HAWT under yaw,this paper investigates the unsteady variations of the aerodynamic performance of a small wind turbine under static yawed and yawing process with sliding grid method,as well as the there-dimensional effect on the unsteady characteristics,using unsteady Reynolds-averaged Navier-Stokes(URANS)simulations.The simulation results are validated with experimental data and blade element momentum(BEM)results.The comparisons show that the CFD results have better agreement with the experimental data than both BEM results.The wind turbine power decreases according to a cosine law with the increase of yaw angle.The torque under yaw shows lower frequency fluctuations than the non-yawed condition due to velocity component of rotation and the influence of spinner.Dynamic yawing causes larger fluctuate than static yaw,and the reason is analyzed.The aerodynamic fluctuation becomes more prominent in the retreating side than that in the advancing side for dynamic yawing case.Variations of effective angle of attack and aerodynamic forces along the blade span are analyzed.The biggest loading position moves from middle span to outer span with the increase of yaw angle.Three-dimensional stall effect presents load fluctuations at the inner board of blade,and becomes stronger with the increase of yaw angle.
基金This work was financially supported by the National Natural Science Foundation of China through contract No.91634109 and No.51676158the National Key Research and Development Program of China(2016YFB0600102).
文摘A computational particle fluid-dynamics model coupled with an energy-minimization multi-scale(EMMS)drag model was applied to investigate the influence of particle-size distribution on the hydrodynamics of a three-dimensional full-loop circulating fluidized bed.Different particle systems,including one monodisperse and two polydisperse cases,were investigated.The numerical model was validated by comparing its results with the experimental axial voidage distribution and solid mass flux.The EMMS drag model had a high accuracy in the computational particle fluid-dynamics simulation of the three-dimensional full-loop circulating fluidized bed.The total number of parcels in the system(Np)influenced the axial voidage distribution in the riser,especially at the lower part of the riser.Additional numerical simulation results showed that axial segregation by size was predicted in the two polydisperse cases and the segregation size increased with an increase in the number of size classes.The axial voidage distribution at the lower portion of the riser was significantly influenced by particle-size distribution.However,radial segregation could only be correctly predicted in the upper region of the riser in the polydisperse case of three solid species.
文摘Three-dimensional finite element models were developed to analyze 304 stainless steel rod and wire hot continuous rolling process with the help of MSC.Marc software. The entire 30-pass deformation process and the actual parameters of production line were taken into account. Static and dynamic procedures were used to study the continuous rolling process with the aid of the thermo-mechanical coupled FEM of elastic-plasticity. The properties of billets, such as deformation, temperature field and rolling force, were mainly discussed. The simulation results of temperature agree well with the measured values. Comparisons of the analysis results obtained using static implicit method and dynamic implicit method were presented. It is shown that static implicit procedure is more accurate than dynamic implicit procedure and is able to simulate the rolling process with a lower speed, such as a roughing mill. Whereas, dynamic analysis shows a higher efficiency than static analysis and is fit for simulating the rolling process with a higher speed, such as a finishing mill.
文摘A comprehensive understanding of the sediment behavior at the entrance of diversion channels requires complete knowledge of threedimensional(3 D) flow behavior around such structures. Dikes and submerged vanes are typical structures used to control sediment entrainment in the diversion channel. In this study, a 3 D computational fluid dynamic(CFD) code was calibrated with experimental data and used to evaluate flow patterns, the diversion ratio of discharge, the strength of secondary flow, and dimensions of the vortex inside the channel in various dike and submerged vane installation scenarios. Results show that the diversion ratio of discharge in the diversion channel is dependent on the width of the flow separation plate in the main channel. A dike perpendicular to the flow with a narrowing ratio of 0.20 doubles the ratio of diverted discharge in addition to reducing suspended sediment input to the basin, compared with a no-dike situation, by creating the outer arch conditions. A further increase in the narrowing ratio decreases the diverted discharge. In addition, increasing the longitudinal distance between consecutive vanes(Ls) increases the velocity gradient between the vanes and leads to a more severe erosion of the bed, near the vanes.
基金Supported by the Academy of Sciences,Malaysia and Ministry of Science and Technology & Innovation
文摘Liquid argon flow along a nanochannel is studied using molecular dynamics (MD) simulation in this work.Large-scale Atomic/Molecular Massively Parallel Simulator (LAMMPS) is used as the MD simulator.The effects of reduced forces at 0.5,1.0 and 2.0 on argon flow on system energy in the form of system potential energy,pressure and velocity profile are described.Output in the form of three-dimensional visualization of the system at steady-state condition using Visual Molecular Dynamics (VMD) is provided to describe the dynamics of the argon atoms.The equilibrium state is reached after 16000 time steps.The effects on system energy,pressure and velocity profile due to reduced force of 2.0 (F2) are clearly distinguishable from the other two lower forces where sufficiently high net force along the direction of the nanochannel for F2 renders the attractive and repulsive forces between the argon atoms virtually non-existent.A reduced force of 0.5 (F0.5) provides liquid argon flow that approaches Poiseuille (laminar) flow as clearly shown by the n-shaped average velocity profile.The extension of the present MD model to a more practical application affords scientists and engineers a good option for simulation of other nanofluidic dynamics processes.
基金supported by Hydro Research Foundation (Grant No. DE-EE0002668)
文摘Hydroelectric facilities impact water temperature; low velocities in a reservoir increase residence time and enhance heat exchange in surface layers. In this study, an unsteady three-dimensional model was developed to predict the temperatm＇e dynamics in the McNary Dam forebay. The model is based on the open-source code OpenFOAM. RANS equations with the Boussinesq approximation were used to solve the flow field. A： realizable k-ε model that accounts for the production of wind turbulence was developed. Solar radiation and convective heat transfer at the free surface were included. The result of the model was compared with the field data collected on August 18, 2004. Changes in diurnal stratification were adequately predicted by the model. Observed vertical and lateral temperature distributions were accurately captured. Results indicate that the model can be used as a numerical tool to assess structural and operational alternatives to reduce the forebay temperature.
基金supported by the National Natural Science Foundation of China(Grant Nos.42222208,41821002)the Special Fund for Taishan Scholar Project(Grant No.tsqn201909061)+1 种基金the Fundamental Research Funds for the Central Universities(Grant No.20CX06067A)Marine S&T Fund of Shandong Province for Pilot National Laboratory for Marine Science and Technology(Qingdao)(Grant No.2021QNLM020001)。
文摘Various types of geofluids exist in deep and ultra-deep layers in petroliferous basins.The geofluids are much more active under high-temperature and high-pressure(HTHP)conditions,but their properties are unclear.We simulated the mixing of different fluids in CH_(4)/C_(3)H_(8)/C_(6)H_(14)/C_(8)H_(18)-water systems and C_(6)H_(14)/C_(8)H_(18)-CO_(2)-H_(2)O systems at temperatures of 25℃ to 425℃ and pressures of 5 MPa to 105 MPa,using an in-situ micron quartz capillary tube thermal simulation system and molecular dynamics numerical simulation software.The mixing processes,patterns,and mechanisms of various fluids were analyzed at microscale under increasing temperature and pressure conditions.The results show that the miscibility of fluids in the different alkane-H_(2)O and alkane-CO_(2)-H_(2)O systems is not instantaneous,but the miscibility degree between different fluid phases increases as the temperature and pressure rise during the experiments.The physical thermal experiments(PTEs)show that the mixing process can be divided into three stages:initial miscibility,segmented dynamic miscibility,and complete miscibility.The molecular dynamics numerical simulations(MDNSs)indicate that the mixing process of fluids in the alkane-H_(2)O and alkane CO_(2)-H_(2)O systems can be divided into seven and eight stages,respectively.The carbon number affects the miscibility of alkanes and water,and the temperature and pressure required to reach the same miscibility stage with water increase with the carbon number(C_(3)H_(8),C_(6)H_(14),CH_(4),C_(8)H_(18)).CO_(2) has a critical bridge role in the miscibility of alkanes and water,and its presence significantly reduces the temperatures required to reach the initial,dynamic,and complete miscibility of alkanes and water.The results are of great significance for analyzing and understanding the miscibility of geofluids in deep and ultra-deep HTHP systems.
