The paper investigates the response of non-initially stressed Euler-Bernoulli beam to uniform partially distributed moving loads. The governing partial differential equations were analyzed for both moving force and mo...The paper investigates the response of non-initially stressed Euler-Bernoulli beam to uniform partially distributed moving loads. The governing partial differential equations were analyzed for both moving force and moving mass problem in order to determine the behaviour of the system under consideration. The analytical method in terms of series solution and numerical method were used for the governing equation. The effect of various beam observed that the response amplitude due to the moving force is greater than that due to moving mass. It was also found that the response amplitude of the moving force problem with non-initial stress increase as mass of the mass of the load M increases.展开更多
Although the effectiveness of a tuned viscous mass damper(TVMD)as an inerter-based device for vibration control in civil structures has been thoroughly investigated,there is a lack of systematic research regarding the...Although the effectiveness of a tuned viscous mass damper(TVMD)as an inerter-based device for vibration control in civil structures has been thoroughly investigated,there is a lack of systematic research regarding the application of TVMDs for seismic response control of industrial buildings coupled with mechanical equipment.Therefore,this study proposes ungrounded and grounded TVMDs to effectively utilize the mass of the mechanical equipment and fully exploit the capabilities of the inerter element.An optimal design methodology is developed by pursuing the maximum effective damping ratio and seeking the most rational TVMD control scheme.Validation of TVMD control performance is conducted through time-history analysis based on 20 real seismic ground motions recommended by ATC-40,and by providing a barrel mixer industrial building as a real-life numerical example.The results show that both an ungrounded and grounded TVMD can effectively mitigate the seismic response of the primary structure.Compared to the traditional tuned mass damper(TMD),TVMDs can obtain improved control performance for a given equipment mass ratio.Moreover,an ungrounded TVMD and a TMD show similar working mechanisms that tend to release the displacement of equipment to keep their optimal state,whereas equipment displacement for a grounded TVMD should be strictly limited to provide sufficient anti-force.展开更多
There is a need for accurate prediction of heat and mass transfer in aerodynamically designed,non-Newtonian nanofluids across aerodynamically designed,high-flux biomedical micro-devices for thermal management and reac...There is a need for accurate prediction of heat and mass transfer in aerodynamically designed,non-Newtonian nanofluids across aerodynamically designed,high-flux biomedical micro-devices for thermal management and reactive coating processes,but existing work is not uncharacteristically remiss regarding viscoelasticity,radiative heating,viscous dissipation,and homogeneous–heterogeneous reactions within a single scheme that is calibrated.This research investigates the flow of Williamson nanofluid across a dynamically wedged surface under conditions that include viscous dissipation,thermal radiation,and homogeneous-heterogeneous reactions.The paper develops a detailed mathematical approach that utilizes boundary layers to transform partial differential equations into ordinary differential equations using similarity transformations.RK4 is the technique for gaining numerical solutions,but with the addition of ANNs,there is an improvement in prediction accuracy and computational efficiency.The study investigates the influence of wedge angle parameter,along with Weissenberg number,thermal radiation parameter and Brownian motion parameter,and Schmidt number,on velocity distribution,temperature distribution,and concentra-tion distribution.Enhanced Weissenberg numbers enhance viscoelastic responses that modify velocity patterns,but radiation parameters and thermophoresis have key impacts on thermal transfer phenomena.This research develops findings that are of enormous application in aerospace,biomedical(artificial hearts and drug delivery),and industrial cooling technology applications.New findings on non-Newtonian nanofluids under full flow systems are included in this work to enhance heat transfer methods in novel fluid-based systems.展开更多
The present study investigates the flow,heat,and mass transfer analysis in the bioconvection of nanofluid containing motile gyrotactic microorganisms through a semi-porous curved oscillatory channel with a magnetic fi...The present study investigates the flow,heat,and mass transfer analysis in the bioconvection of nanofluid containing motile gyrotactic microorganisms through a semi-porous curved oscillatory channel with a magnetic field.These microorganisms produce density gradients by swimming,which induces macroscopic convection flows in the fluid.This procedure improves the mass and heat transfer,illustrating the interaction between biological activity and fluid dynamics.Furthermore,instead of considering traditional Fourier's and Fick's law the energy and concentration equations are developed by incorporating Cattaneo-Christov double diffusion theory.Moreover,to examine the influence of thermophoresis and Brownian diffusions in the fluid we have adopted the Buongiorno nanofluid model.Due to the oscillation of the surface of the channel,the mathematical development of the considered flow problem is obtained in the form of partial differential equations via the curvilinear coordinate system.The convergent series solution of the governing flow equations is obtained after applying the homotopy analysis method(HAM).The effects of different pertinent flow parameters on velocity,motile microorganism density distribution,concentration,pressure,temperature,and skin friction coefficient are examined and discussed in detail with the help of graphs and tables.It is observed during the current study that the density of microorganisms is enhanced for higher values of Reynolds number,Peclet number,radius of curvature variable,and Lewis number.展开更多
Bubble breakup at T-junction microchannels is the basis for the numbering-up of gas−liquid two-phase flow in parallelized microchannels. This article presents the bubble breakup in viscous liquids at a microfluidic T-...Bubble breakup at T-junction microchannels is the basis for the numbering-up of gas−liquid two-phase flow in parallelized microchannels. This article presents the bubble breakup in viscous liquids at a microfluidic T-junction. Nitrogen is used as the gas phase, and glycerol-water mixtures with different mass concentration of glycerol as the liquid phase. The evolution of the gas−liquid interface during bubble breakup at the microfluidic T-junction is explored. The thinning of the bubble neck includes the squeezing stage and the rapid pinch-off stage. In the squeezing stage, the power law relation is found between the minimum width of the bubble neck and the time, and the values of exponents α1 and α2 are influenced by the viscous force. The values of pre-factors m_(1) and m_(2) are negatively correlated with the capillary number. In the rapid pinch-off stage, the thinning of the bubble neck is predominated by the surface tension, and the minimum width of the bubble neck can be scaled with the remaining time as power-law. The propagation of the bubble tip can be characterized by the power law between the movement distance and the time, with decreasing exponent as increased liquid viscosity.展开更多
Millimeter channel reactors(MCRs)have received increasing attention because of their ability to enhance treatment capacity in addition to the advantages of microchannels.In previous studies,less work has been conducte...Millimeter channel reactors(MCRs)have received increasing attention because of their ability to enhance treatment capacity in addition to the advantages of microchannels.In previous studies,less work has been conducted on the micromixing process and enhancement strategies for non-Newtonian fluids in MCRs.In this study,the micromixing efficiency in MCRs was experimentally investigated using CMC(carboxymethyl cellulose sodium)aqueous solution to simulate a non-Newtonian fluid,and the enhanced mechanism of micromixing efficiency by the addition of internals and rotation was analyzed by computational fluid dynamics(CFD)simulations.The results show that in the conventional channel,increasing the flow rate improves the micromixing efficiency when the CMC concentration is low.However,when the CMC concentration is higher,the higher the flow rate,the lower the micromixing efficiency.The highest micromixing efficiency is obtained for the rotationally coupled inner components,followed by the single rotation and the lowest is for the internals only.CFD simulations reveal that the most effective way to improve the micromixing efficiency of non-Newtonian fluids with shear-thinning behavior is to increase the shear force in the reactor,which effectively reduces the apparent viscosity.These results provide the theoretical foundation for enhancing the micromixing process of non-Newtonian fluids in small-size reactors.展开更多
Viscoelastic nanofluid flow has drawn substantial interest due to its industrial uses,including research and testing of medical devices,lubrication and tribology,drug delivery systems,and environmental remediation.Thi...Viscoelastic nanofluid flow has drawn substantial interest due to its industrial uses,including research and testing of medical devices,lubrication and tribology,drug delivery systems,and environmental remediation.This work studies nanofluid flow over a viscoelastic boundary layer,focusing on mass and heat transmission.An analysis is performed on the flow traversing a porous sheet undergoing nonlinear stretching.It assesses the consequences of viscous dissipation and thermal radiation.The scientific nanofluid framework laid out by Buongiorno has been exploited.The partial differential equations illustrating the phenomena can be transfigured into ordinary differential equations by utilizing appropriate similarity transformations.The simplified equations are unmasked using the Homotopy Analysis Method(HAM),a semi-analytical approach designed to solve nonlinear ordinary and partial differential equations commonly encountered in numerous scientific and engineering disciplines.Calculations are executed to ascertain the numerical solutions related to temperature,concentration,and velocity fields,accompanied by the skin friction coefficient,local Nusselt number,and local Sherwood number.Visualizations of the results are accompanied by pertinent explanations grounded in scientific principles.The temperature distribution and corresponding thermal layer have been enhanced due to radiative and viscous dissipation characteristics.Additionally,it has been noted that a delay in fluid movement results from an improvement in the porous medium parameter and magnetic field values.A falling trend in the Nusselt number is observed as the Eckert and thermophoresis parameters increase.The current numerical results have been effectively validated against previous difficulties.展开更多
Viscoelastic solids,such as composite propellants,exhibit significant time and rate dependencies,and their fracture processes display high levels of nonlinearity.However,the correlation between crack propagation and v...Viscoelastic solids,such as composite propellants,exhibit significant time and rate dependencies,and their fracture processes display high levels of nonlinearity.However,the correlation between crack propagation and viscoelastic energy dissipation in these materials remains unclear.Therefore,accurately modeling and understanding of their fracture behavior is crucial for relevant engineering applications.This study proposes a novel viscoelastic phase-field model.In the numerical implementation,the adopted adaptive time-stepping iterative strategy effectively accelerates the coupling iteration efficiency between the phase-field and the displacement field.Moreover,all unknown parameters in the model,including the form of the phase-field degradation function,are identified through fitting against experimental data.Based on an introduced scaling factor,themechanical response behaviors of solid propellant dogbone specimens under cyclic loading,relaxation,and tension are analyzed,and the predictive capacity of the model is demonstrated by comparing the experimental data with the simulation results.Finally,modeling results for Mode-I and Mode-II crack propagation in single-edge-notched specimens indicate that the reduction of viscous energy dissipation will significantly increase the fracture growth rate,but under the same boundary conditions,the crack path remains unchanged.展开更多
Non-Darcian flow in rock fractures exhibits significant anisotropic characteristics,which can be affected by mechanical processes,such as cyclic shearing.Understanding the evolution of anisotropic nonDarcian flow is c...Non-Darcian flow in rock fractures exhibits significant anisotropic characteristics,which can be affected by mechanical processes,such as cyclic shearing.Understanding the evolution of anisotropic nonDarcian flow is crucial for characterizing groundwater flow and mass/heat transport in fractured rock masses.In this study,we conducted experiments on non-Darcian flow in single rough fractures under cyclic shearing conditions,aiming to analyze the anisotropic evolution of inertial permeability and viscous permeability.We established quantitative characterization models for the two types of permeability.First,we conducted cyclic shearing experiments on four sets of 24 rough rock fractures,investigating their shear characteristics.Then,we performed 480 non-Darcian flow experiments to analyze the anisotropic evolution of viscous permeability and inertial permeability of these rock fractures.The results showed that viscous permeability exhibited significant differences only in the orthogonal direction,while inertial permeability exhibited differences in both orthogonal and opposite directions.With increase in the shear cycles,the differences in the orthogonal direction gradually increased,while those in opposite direction gradually decreased.Finally,we established characterization equations for the two permeabilities based on the proposed directional geometric parameters and validated the performance of these equations with experimental data.These findings are useful for the quantitative characterization of the evolution of non-Darcian flow in fractures under dynamic loading conditions.展开更多
Focusing on the conversion of pressure energy and internal energy under viscous dissipation,a heat-fluid-solid coupling method is established to study the flow and stress fields of 100 MPa submerged water jets.Results...Focusing on the conversion of pressure energy and internal energy under viscous dissipation,a heat-fluid-solid coupling method is established to study the flow and stress fields of 100 MPa submerged water jets.Results indicate that pressure energy to internal energy conversion primarily occurs at three locations:the nozzle wall,the potential core edge,and the impact wall,with the most intense conversion occurring at the impact wall.The impact temperature of the jet can reach 200℃,and the high-temperature region covers an area more than 4 times that of the high-pressure.Thermal stress can especially amplify erosion stress by more than 100%and expand the erosion area by more than 400%.Therefore,it serves as a dominant factor determining the optimal spray distance and jet angle in hard rock(E≥40 GPa).With increased spray distance or jet angle,impact pressure decreases,while the high-temperature zone moves toward the high-pressure region,thus increasing the overlap between the two regions.This extended overlap enhances the temperature-pressure coupling effect,consequently reducing the threshold pressure for jet-breaking rock.Therefore,the maximum erosion stress increases first and then decreases,and an optimal spray distance and jet angle exist.The optimal jet angle,defined by the maximum tensile stress,decreases with the dimensionless spray distance increase,ranging between 0°and 40°.This temperature-pressure coupling reduces rock-breaking threshold pressure by 15%-75%for elastic moduli of 40-80 GPa,with maximum erosion stress peaking at a dimensionless spray distance of 9 and jet angles of 15°-20°.When the overlap region decreases,the area affected by the temperature and pressure fields increases,leading to an increase in the rock-breaking area.It is important to note that reducing the rock-breaking threshold pressure and increasing the rock-breaking area are mutually exclusive objectives.It is necessary to optimize the design of the spray distance and jet angle according to the on-site rock-breaking requirements.展开更多
Magnetohydrodynamic(MHD)radiative chemically reactive mixed convection flow of a hybrid nanofluid(Al_(2)O_(3)–Cu/H_(2)O)across an inclined,porous,and stretched sheet is examined in this study,along with its unsteady ...Magnetohydrodynamic(MHD)radiative chemically reactive mixed convection flow of a hybrid nanofluid(Al_(2)O_(3)–Cu/H_(2)O)across an inclined,porous,and stretched sheet is examined in this study,along with its unsteady heat and mass transport properties.The hybrid nanofluid’s enhanced heat transfer efficiency is a major benefit in high-performance engineering applications.It is composed of two separate nanoparticles suspended in a base fluid and is chosen for its improved thermal properties.Thermal radiation,chemical reactions,a transverse magnetic field,surface stretching with time,injection or suction through the porous medium,and the effect of inclination,which introduces gravity-induced buoyancy forces,are all important physical phenomena that are taken into account in the analysis.A system of nonlinear ordinary differential equations(ODEs)is derived from the governing partial differential equations for mass,momentum,and energy by applying suitable similarity transformations.This simplifies the modeling procedure.The bvp4c solver in MATLAB is then used to numerically solve these equations.Different governing parameters modify temperature,concentration,and velocity profiles in graphs and tables.These factors include radiation intensity,chemical reaction rate,magnetic field strength,unsteadiness,suction/injection velocity,inclination angle,and nanoparticle concentration.A complex relationship between buoyancy and magnetic factors makes hybrid nanofluids better at heat transmission than regular ones.Thermal systems including cooling technologies,thermal coatings,and electronic heat management benefit from these findings.展开更多
Maximizing the efficiency of thermal engineering equipment involves minimizing entropy generation,which arises from irreversible processes.This study examines thermal transport and entropy generation in viscous flow o...Maximizing the efficiency of thermal engineering equipment involves minimizing entropy generation,which arises from irreversible processes.This study examines thermal transport and entropy generation in viscous flow over a radially stretching disk,incorporating the effects of magnetohydrodynamics(MHD),viscous dissipation,Joule heating,and radiation.Similarity transformations are used to obtain dimensionless nonlinear ordinary differential equations(ODEs)from the governing coupled partial differential equations(PDEs).The converted equations are then solved by using the BVP4C solver in MATLAB.To validate the findings,the results are compared with previously published studies under fixed parameter conditions,demonstrating strong agreement.Various key parameters are analyzed graphically to assess their impact on velocity and temperature distributions.Additionally,Bejan number and entropy generation variations are presented for different physical parameters.The injection parameter(S<0)increases the heat transfer rate,while the suction parameter(S>0)reduces it,exhibiting similar effects on fluid velocity.The magnetic parameter(M)effectively decreases entropy generation within the range of approximately 0≤η≤0.6.Beyond this interval,its influence diminishes as entropy generation values converge,with similar trends observed for the Bejan number.Furthermore,increased thermal radiation intensity is identified as a critical factor in enhancing entropy generation and the Bejan number.展开更多
Styrene-butadiene-styrene(SBS)modified asphalt(SA)has long found effective applications in road construction materials.When combined with fillers,SBS-modified asphalt has demonstrated promising resistance to fatigue c...Styrene-butadiene-styrene(SBS)modified asphalt(SA)has long found effective applications in road construction materials.When combined with fillers,SBS-modified asphalt has demonstrated promising resistance to fatigue cracking caused by temperature fluctuations and aging.In this study,molybdenum disulfide(MoS_(2))and polyphosphoric acid(PPA)were ground in naphthenic oil(NO)and subjected to mechanical activation to create PPAmodified MoS_(2),referred to as OMS-PPA.By blending various ratios of OMS-PPA with SBS-modified asphalt,composite-modified asphalts were successfully developed to enhance their overall properties.To assess the mechanical characteristics and stability of these modified asphalts,various methods were employed,including penetration factor,flow activation energy,fluorescence microscopy,and dynamic shear rheology.Additionally,the short-term aging performance was evaluated using Fourier transform infrared(FTIR)spectroscopy and nanoindentation tests.The results revealed a 3.7%decrease in the penetration-temperature coefficient for SAOMS compared to SA,while 1-SA-OMS-PPA showed an even greater reduction of 7.1%.Furthermore,after short-term aging,carboxyl group generation in SA increased by 5.93%,while SA-OMS exhibited a smaller rise of 1.36%,and 1-SA-OMS-PPA saw an increase of just 0.93%.The study also highlighted significant improvements in the hardness of these materials.The hardness change ratio for SA-OMS decreased by 43.08%,while the ratio for 1-SA-OMS-PPA saw a notable reduction of 65.16% compared to unmodified SA.These findings suggest that OMS-PPA contributed to improvements in temperature sensitivity,particle dispersibility,and resistance to shortterm aging in asphalts.The results hold significant promise for the future development of advanced asphalt-based materials with potential high-value applications in flexible pavements for highways.展开更多
This study rigorously examines the interplay between viscous dissipation,magnetic effects,and thermal radiation on the flow behavior of a non-Newtonian Carreau squeezed fluid passing by a sensor surface within a micro...This study rigorously examines the interplay between viscous dissipation,magnetic effects,and thermal radiation on the flow behavior of a non-Newtonian Carreau squeezed fluid passing by a sensor surface within a micro cantilever channel,aiming to deepen our understanding of heat transport processes in complex fluid dynamics scenarios.The primary objective is to elucidate how physical operational parameters influence both the velocity of fluid flow and its temperature distribution,utilizing a comprehensive numerical approach.Employing a combination of mathematical modeling techniques,including similarity transformation,this investigation transforms complex partial differential equations into more manageable ordinary ones,subsequently solving them using the homotopy perturbation method.By analyzing the obtained solutions and presenting them graphically,alongside detailed analysis,the study sheds light on the pivotal role of significant parameters in shaping fluid movement and energy distribution.Noteworthy observations reveal a substantial increase in fluid velocity with escalating magnetic parameters,while conversely,a contrasting trend emerges in the temperature distribution,highlighting the intricate relationship between magnetic effects,flow dynamics,and thermal behavior in non-Newtonian fluids.Further,the suction velocity enhance both the local skin friction and Nusselt numbers,whereas theWeissenberg number reduces them,opposite to the effect of the power-law index.展开更多
This paper investigates the mechanisms of rock failure related to axial splitting and shear failure due to hoop stresses in cylindrical specimens.The hoop stresses are caused by normal viscous stress.The rheological d...This paper investigates the mechanisms of rock failure related to axial splitting and shear failure due to hoop stresses in cylindrical specimens.The hoop stresses are caused by normal viscous stress.The rheological dynamics theory(RDT)is used,with the mechanical parameters being determined by P-and S-wave velocities.The angle of internal friction is determined by the ratio of Young's modulus and the dynamic modulus,while dynamic viscosity defines cohesion and normal viscous stress.The effect of frequency on cohesion is considered.The initial stress state is defined by the minimum cohesion at the elastic limit when axial splitting can occur.However,as radial cracks grow,the stress state becomes oblique and moves towards the shear plane.The maximum and nonlinear cohesions are defined by the rock parameters under compressive strength when the radial crack depth reaches a critical value.The efficacy and precision of RDT are validated through the presentation of ultrasonic measurements on sandstone and rock specimens sourced from the literature.The results presented in dimensionless diagrams can be utilized in microcrack zones in the absence of lateral pressure in rock masses that have undergone disintegration due to excavation.展开更多
Studying immiscible fluid displacement patterns can provide a better understanding of displacement processes within heterogeneous porous media,thereby helping improving oil recovery and optimizing geological CO_(2) se...Studying immiscible fluid displacement patterns can provide a better understanding of displacement processes within heterogeneous porous media,thereby helping improving oil recovery and optimizing geological CO_(2) sequestration.As the injection rate of water displacing oil increases and the displacement pattern transits from capillary fingering to viscous fingering,there is a broad crossover zone between the two that can adversely affect the oil displacement efficiency.While previous studies have utilized phase diagrams to investigate the influence of the viscosity ratio and wettability of the crossover zone,fewer have studied the impact of rock heterogeneity.In this study,we created pore network models with varying degrees of heterogeneity to simulate water flooding at different injection rates.Our model quantifies capillary and viscous fingering characteristics while investigating porous media heterogeneity's role in the crossover zone.Analysis of simulation results reveals that a higher characteristic front flow rate within the crossover zone leads to earlier breakthrough and reduced displacement efficiency.Increased heterogeneity in the porous media raises injection-site pressure,lowers water saturation,and elevates the characteristic front flow rate,thereby expanding the extent of crossover zone.展开更多
To investigate the influence of different longitudinal constraint systems on the longitudinal displacement at the girder ends of a three-tower suspension bridge,this study takes the Cangrong Xunjiang Bridge as an engi...To investigate the influence of different longitudinal constraint systems on the longitudinal displacement at the girder ends of a three-tower suspension bridge,this study takes the Cangrong Xunjiang Bridge as an engineering case for finite element analysis.This bridge employs an unprecedented tower-girder constraintmethod,with all vertical supports placed at the transition piers at both ends.This paper aims to study the characteristics of longitudinal displacement control at the girder ends under this novel structure,relying on finite element(FE)analysis.Initially,based on the Weigh In Motion(WIM)data,a random vehicle load model is generated and applied to the finite elementmodel.Several longitudinal constraint systems are proposed,and their effects on the structural response of the bridge are compared.The most reasonable system,balancing girder-end displacement and transitional pier stress,is selected.Subsequently,the study examines the impact of different viscous damper parameters on key structural response indicators,including cumulative longitudinal displacement at the girder ends,maximum longitudinal displacement at the girder ends,cumulative longitudinal displacement at the pier tops,maximum longitudinal displacement at the pier tops,longitudinal acceleration at the pier tops,and maximum bending moment at the pier bottoms.Finally,the coefficient of variation(CV)-TOPSIS method is used to optimize the viscous damper parameters for multiple objectives.The results show that adding viscous dampers at the side towers,in addition to the existing longitudinal limit bearings at the central tower,can most effectively reduce the response of structural indicators.The changes in these indicators are not entirely consistent with variations in damping coefficient and velocity exponent.The damper parameters significantly influence cumulative longitudinal displacement at the girder ends,cumulative longitudinal displacement at the pier tops,and maximum bending moments at the pier bottoms.The optimal damper parameters are found to be a damping coefficient of 5000 kN/(m/s)0.2 and a velocity exponent of 0.2.展开更多
This study explores free convective heat transfer in an electrically conducting nanofluid flow over a moving semi-infinite flat plate under the influence of an induced magnetic field and viscous dissipation.The veloci...This study explores free convective heat transfer in an electrically conducting nanofluid flow over a moving semi-infinite flat plate under the influence of an induced magnetic field and viscous dissipation.The velocity and magnetic field vectors are aligned at a distance from the plate.The Spectral Relaxation Method(SRM)is used to numerically solve the coupled nonlinear partial differential equations,analyzing the effects of the Eckert number on heat and mass transfer.Various nanofluids containing Cu,Ag,Al_(2)O_(3),and TiO_(2) nanoparticles are examined to assess how external magnetic fields influence fluid behavior.Key parameters,including the nanoparticle volume fraction ϕ,magnetic parameter M,magnetic Prandtl number Prm,and Eckert number Ec,are evaluated for their impact on velocity,induced magnetic field,and heat transfer.Results indicate that increasing the magnetic parameter reduces velocity and magnetic field components in alumina-water nanofluids,while a higher nanoparticle volume fraction enhances the thermal boundary layer.Greater viscous dissipation(Ec)increases temperature,and Al_(2)O_(3) nanofluids exhibit higher speeds than Cu,Ag,and TiO_(2) due to density differences.Silver-water nanofluids,with their higher density,move more slowly.The SRM results closely align with those from Maple,confirming the method’s accuracy.展开更多
The internal solitary wave(ISW)represents a frequent and severe oceanic dynamic phenomenon observed in the South China Sea,exposing marine structures to sudden loads.This paper examines the prediction model of interac...The internal solitary wave(ISW)represents a frequent and severe oceanic dynamic phenomenon observed in the South China Sea,exposing marine structures to sudden loads.This paper examines the prediction model of interaction loads between ISW and FPSO,accounting for varying attack angles and incorporating ISW theories.The research demonstrates that the horizontal and transverse forces on FPSO under internal solitary waves(ISWs)comprise wave pressure difference force and viscous force,while the vertical force primarily consists of vertical wave pressure difference force.The wave pressure difference force is determined using the Froude-Krylov equation.The viscous force is derived from the tangential particle velocity induced by ISW and the viscous coefficient.The viscous coefficient formula is obtained through regression analysis of experimental data with different ISW attack angles.The research reveals that the horizontal viscous coefficient C_(vx)decreases as Reynolds number(R_(e))increases,while the transverse viscous coefficient C_(vy)initially increases and subsequently decreases with the growth of the Keulegan-Carpenter number(KC).Moreover,changes in wave propagation direction significantly affect the extreme magnitudes of both horizontal and transverse forces,and simultaneously modify the transverse force orientation,while having minimal impact on the vertical force.Additionally,the forces increase with the ISW’s amplitude.For horizontal and transverse forces,a thinner upper fluid layer generates larger forces.Comparative analysis of experimental,numerical,and theoretical results indicates strong agreement between theoretical predictions and experimental and numerical outcomes.展开更多
This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This researc...This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This research examines the flow of a three-layered viscous fluid,considering the combined influence of heat and solutal buoyancy driven Rayleigh-Bénard convection,as well as thermal and solutal Marangoni convection.The homotopy perturbation method is used to examine and simulate complex fluid flow and transport phenomena,providing important understanding of the fundamental physics and assisting in the optimization of various battery configurations.The inquiry examines the primary elements that influence Marangoni convection and its impact on battery performance,providing insights on possible enhancements in energy storage devices.The findings indicate that the velocity profiles shown graphically exhibit a prominent core zone characterized by the maximum speed,which progressively decreases as it approaches the walls of the channel.This study enhances our comprehension of fluid dynamics and the transmission of heat and mass in intricate systems,which has substantial ramifications for the advancement of sustainable energy solutions.展开更多
文摘The paper investigates the response of non-initially stressed Euler-Bernoulli beam to uniform partially distributed moving loads. The governing partial differential equations were analyzed for both moving force and moving mass problem in order to determine the behaviour of the system under consideration. The analytical method in terms of series solution and numerical method were used for the governing equation. The effect of various beam observed that the response amplitude due to the moving force is greater than that due to moving mass. It was also found that the response amplitude of the moving force problem with non-initial stress increase as mass of the mass of the load M increases.
基金National Natural Science Foundation of China under Grant Nos.52408327 and 52278306Key Research and Development Program of Hunan Province,China under Grant No.2022SK2096+3 种基金Science and Technology Progress and Innovation Project of the Department of Transportation of Hunan Province,China under Grant No.201912Natural Science Foundation of Hunan Province,China under Grant No.2024JJ6198Scientific Research Project of the Education Department of Hunan Province,China under Grant No.25A0645Emergency Management Science and Technology Project of the Emergency Management Department of Hunan Province,China under Grant No.yjtkjxm_202406。
文摘Although the effectiveness of a tuned viscous mass damper(TVMD)as an inerter-based device for vibration control in civil structures has been thoroughly investigated,there is a lack of systematic research regarding the application of TVMDs for seismic response control of industrial buildings coupled with mechanical equipment.Therefore,this study proposes ungrounded and grounded TVMDs to effectively utilize the mass of the mechanical equipment and fully exploit the capabilities of the inerter element.An optimal design methodology is developed by pursuing the maximum effective damping ratio and seeking the most rational TVMD control scheme.Validation of TVMD control performance is conducted through time-history analysis based on 20 real seismic ground motions recommended by ATC-40,and by providing a barrel mixer industrial building as a real-life numerical example.The results show that both an ungrounded and grounded TVMD can effectively mitigate the seismic response of the primary structure.Compared to the traditional tuned mass damper(TMD),TVMDs can obtain improved control performance for a given equipment mass ratio.Moreover,an ungrounded TVMD and a TMD show similar working mechanisms that tend to release the displacement of equipment to keep their optimal state,whereas equipment displacement for a grounded TVMD should be strictly limited to provide sufficient anti-force.
基金supported by the Korea Institute of Energy Technology Evaluation and Planning(KETEP)and the Ministry of Trade,Industry&Energy(MOTIE)of the Republic of Korea(No.RS-2025-02315209).
文摘There is a need for accurate prediction of heat and mass transfer in aerodynamically designed,non-Newtonian nanofluids across aerodynamically designed,high-flux biomedical micro-devices for thermal management and reactive coating processes,but existing work is not uncharacteristically remiss regarding viscoelasticity,radiative heating,viscous dissipation,and homogeneous–heterogeneous reactions within a single scheme that is calibrated.This research investigates the flow of Williamson nanofluid across a dynamically wedged surface under conditions that include viscous dissipation,thermal radiation,and homogeneous-heterogeneous reactions.The paper develops a detailed mathematical approach that utilizes boundary layers to transform partial differential equations into ordinary differential equations using similarity transformations.RK4 is the technique for gaining numerical solutions,but with the addition of ANNs,there is an improvement in prediction accuracy and computational efficiency.The study investigates the influence of wedge angle parameter,along with Weissenberg number,thermal radiation parameter and Brownian motion parameter,and Schmidt number,on velocity distribution,temperature distribution,and concentra-tion distribution.Enhanced Weissenberg numbers enhance viscoelastic responses that modify velocity patterns,but radiation parameters and thermophoresis have key impacts on thermal transfer phenomena.This research develops findings that are of enormous application in aerospace,biomedical(artificial hearts and drug delivery),and industrial cooling technology applications.New findings on non-Newtonian nanofluids under full flow systems are included in this work to enhance heat transfer methods in novel fluid-based systems.
文摘The present study investigates the flow,heat,and mass transfer analysis in the bioconvection of nanofluid containing motile gyrotactic microorganisms through a semi-porous curved oscillatory channel with a magnetic field.These microorganisms produce density gradients by swimming,which induces macroscopic convection flows in the fluid.This procedure improves the mass and heat transfer,illustrating the interaction between biological activity and fluid dynamics.Furthermore,instead of considering traditional Fourier's and Fick's law the energy and concentration equations are developed by incorporating Cattaneo-Christov double diffusion theory.Moreover,to examine the influence of thermophoresis and Brownian diffusions in the fluid we have adopted the Buongiorno nanofluid model.Due to the oscillation of the surface of the channel,the mathematical development of the considered flow problem is obtained in the form of partial differential equations via the curvilinear coordinate system.The convergent series solution of the governing flow equations is obtained after applying the homotopy analysis method(HAM).The effects of different pertinent flow parameters on velocity,motile microorganism density distribution,concentration,pressure,temperature,and skin friction coefficient are examined and discussed in detail with the help of graphs and tables.It is observed during the current study that the density of microorganisms is enhanced for higher values of Reynolds number,Peclet number,radius of curvature variable,and Lewis number.
基金supports for this project from State Key Laboratory of Chemical Safety(SKLCS–2024001)are gratefully acknowledged。
文摘Bubble breakup at T-junction microchannels is the basis for the numbering-up of gas−liquid two-phase flow in parallelized microchannels. This article presents the bubble breakup in viscous liquids at a microfluidic T-junction. Nitrogen is used as the gas phase, and glycerol-water mixtures with different mass concentration of glycerol as the liquid phase. The evolution of the gas−liquid interface during bubble breakup at the microfluidic T-junction is explored. The thinning of the bubble neck includes the squeezing stage and the rapid pinch-off stage. In the squeezing stage, the power law relation is found between the minimum width of the bubble neck and the time, and the values of exponents α1 and α2 are influenced by the viscous force. The values of pre-factors m_(1) and m_(2) are negatively correlated with the capillary number. In the rapid pinch-off stage, the thinning of the bubble neck is predominated by the surface tension, and the minimum width of the bubble neck can be scaled with the remaining time as power-law. The propagation of the bubble tip can be characterized by the power law between the movement distance and the time, with decreasing exponent as increased liquid viscosity.
基金supported by the National Natural Science Foundation of China(22078009)National Key Research Program of China(2021YFC3001102,2021YFC3001100).
文摘Millimeter channel reactors(MCRs)have received increasing attention because of their ability to enhance treatment capacity in addition to the advantages of microchannels.In previous studies,less work has been conducted on the micromixing process and enhancement strategies for non-Newtonian fluids in MCRs.In this study,the micromixing efficiency in MCRs was experimentally investigated using CMC(carboxymethyl cellulose sodium)aqueous solution to simulate a non-Newtonian fluid,and the enhanced mechanism of micromixing efficiency by the addition of internals and rotation was analyzed by computational fluid dynamics(CFD)simulations.The results show that in the conventional channel,increasing the flow rate improves the micromixing efficiency when the CMC concentration is low.However,when the CMC concentration is higher,the higher the flow rate,the lower the micromixing efficiency.The highest micromixing efficiency is obtained for the rotationally coupled inner components,followed by the single rotation and the lowest is for the internals only.CFD simulations reveal that the most effective way to improve the micromixing efficiency of non-Newtonian fluids with shear-thinning behavior is to increase the shear force in the reactor,which effectively reduces the apparent viscosity.These results provide the theoretical foundation for enhancing the micromixing process of non-Newtonian fluids in small-size reactors.
文摘Viscoelastic nanofluid flow has drawn substantial interest due to its industrial uses,including research and testing of medical devices,lubrication and tribology,drug delivery systems,and environmental remediation.This work studies nanofluid flow over a viscoelastic boundary layer,focusing on mass and heat transmission.An analysis is performed on the flow traversing a porous sheet undergoing nonlinear stretching.It assesses the consequences of viscous dissipation and thermal radiation.The scientific nanofluid framework laid out by Buongiorno has been exploited.The partial differential equations illustrating the phenomena can be transfigured into ordinary differential equations by utilizing appropriate similarity transformations.The simplified equations are unmasked using the Homotopy Analysis Method(HAM),a semi-analytical approach designed to solve nonlinear ordinary and partial differential equations commonly encountered in numerous scientific and engineering disciplines.Calculations are executed to ascertain the numerical solutions related to temperature,concentration,and velocity fields,accompanied by the skin friction coefficient,local Nusselt number,and local Sherwood number.Visualizations of the results are accompanied by pertinent explanations grounded in scientific principles.The temperature distribution and corresponding thermal layer have been enhanced due to radiative and viscous dissipation characteristics.Additionally,it has been noted that a delay in fluid movement results from an improvement in the porous medium parameter and magnetic field values.A falling trend in the Nusselt number is observed as the Eckert and thermophoresis parameters increase.The current numerical results have been effectively validated against previous difficulties.
基金funded by National Natural Science Foundation of China(Grant No.11872372)Graduate Innovation Foundation of Hunan Province of China(Grant No.CX20230018).
文摘Viscoelastic solids,such as composite propellants,exhibit significant time and rate dependencies,and their fracture processes display high levels of nonlinearity.However,the correlation between crack propagation and viscoelastic energy dissipation in these materials remains unclear.Therefore,accurately modeling and understanding of their fracture behavior is crucial for relevant engineering applications.This study proposes a novel viscoelastic phase-field model.In the numerical implementation,the adopted adaptive time-stepping iterative strategy effectively accelerates the coupling iteration efficiency between the phase-field and the displacement field.Moreover,all unknown parameters in the model,including the form of the phase-field degradation function,are identified through fitting against experimental data.Based on an introduced scaling factor,themechanical response behaviors of solid propellant dogbone specimens under cyclic loading,relaxation,and tension are analyzed,and the predictive capacity of the model is demonstrated by comparing the experimental data with the simulation results.Finally,modeling results for Mode-I and Mode-II crack propagation in single-edge-notched specimens indicate that the reduction of viscous energy dissipation will significantly increase the fracture growth rate,but under the same boundary conditions,the crack path remains unchanged.
基金supported by the National Natural Science Foundation of China(Grant No.42202316)the China Postdoctoral Science Foundation(Grant No.2022M712963)the Open Fund of Badong National Observation and Research Station of Geohazards(Grant No.BNORSG-202309).
文摘Non-Darcian flow in rock fractures exhibits significant anisotropic characteristics,which can be affected by mechanical processes,such as cyclic shearing.Understanding the evolution of anisotropic nonDarcian flow is crucial for characterizing groundwater flow and mass/heat transport in fractured rock masses.In this study,we conducted experiments on non-Darcian flow in single rough fractures under cyclic shearing conditions,aiming to analyze the anisotropic evolution of inertial permeability and viscous permeability.We established quantitative characterization models for the two types of permeability.First,we conducted cyclic shearing experiments on four sets of 24 rough rock fractures,investigating their shear characteristics.Then,we performed 480 non-Darcian flow experiments to analyze the anisotropic evolution of viscous permeability and inertial permeability of these rock fractures.The results showed that viscous permeability exhibited significant differences only in the orthogonal direction,while inertial permeability exhibited differences in both orthogonal and opposite directions.With increase in the shear cycles,the differences in the orthogonal direction gradually increased,while those in opposite direction gradually decreased.Finally,we established characterization equations for the two permeabilities based on the proposed directional geometric parameters and validated the performance of these equations with experimental data.These findings are useful for the quantitative characterization of the evolution of non-Darcian flow in fractures under dynamic loading conditions.
基金supported by the National Natural Science Foundation of China(No.52204126)the Shandong Provincial Natural Science Foundation(Nos.ZR2022ME077,ZR2022QE060,and ZR2023ME119).
文摘Focusing on the conversion of pressure energy and internal energy under viscous dissipation,a heat-fluid-solid coupling method is established to study the flow and stress fields of 100 MPa submerged water jets.Results indicate that pressure energy to internal energy conversion primarily occurs at three locations:the nozzle wall,the potential core edge,and the impact wall,with the most intense conversion occurring at the impact wall.The impact temperature of the jet can reach 200℃,and the high-temperature region covers an area more than 4 times that of the high-pressure.Thermal stress can especially amplify erosion stress by more than 100%and expand the erosion area by more than 400%.Therefore,it serves as a dominant factor determining the optimal spray distance and jet angle in hard rock(E≥40 GPa).With increased spray distance or jet angle,impact pressure decreases,while the high-temperature zone moves toward the high-pressure region,thus increasing the overlap between the two regions.This extended overlap enhances the temperature-pressure coupling effect,consequently reducing the threshold pressure for jet-breaking rock.Therefore,the maximum erosion stress increases first and then decreases,and an optimal spray distance and jet angle exist.The optimal jet angle,defined by the maximum tensile stress,decreases with the dimensionless spray distance increase,ranging between 0°and 40°.This temperature-pressure coupling reduces rock-breaking threshold pressure by 15%-75%for elastic moduli of 40-80 GPa,with maximum erosion stress peaking at a dimensionless spray distance of 9 and jet angles of 15°-20°.When the overlap region decreases,the area affected by the temperature and pressure fields increases,leading to an increase in the rock-breaking area.It is important to note that reducing the rock-breaking threshold pressure and increasing the rock-breaking area are mutually exclusive objectives.It is necessary to optimize the design of the spray distance and jet angle according to the on-site rock-breaking requirements.
文摘Magnetohydrodynamic(MHD)radiative chemically reactive mixed convection flow of a hybrid nanofluid(Al_(2)O_(3)–Cu/H_(2)O)across an inclined,porous,and stretched sheet is examined in this study,along with its unsteady heat and mass transport properties.The hybrid nanofluid’s enhanced heat transfer efficiency is a major benefit in high-performance engineering applications.It is composed of two separate nanoparticles suspended in a base fluid and is chosen for its improved thermal properties.Thermal radiation,chemical reactions,a transverse magnetic field,surface stretching with time,injection or suction through the porous medium,and the effect of inclination,which introduces gravity-induced buoyancy forces,are all important physical phenomena that are taken into account in the analysis.A system of nonlinear ordinary differential equations(ODEs)is derived from the governing partial differential equations for mass,momentum,and energy by applying suitable similarity transformations.This simplifies the modeling procedure.The bvp4c solver in MATLAB is then used to numerically solve these equations.Different governing parameters modify temperature,concentration,and velocity profiles in graphs and tables.These factors include radiation intensity,chemical reaction rate,magnetic field strength,unsteadiness,suction/injection velocity,inclination angle,and nanoparticle concentration.A complex relationship between buoyancy and magnetic factors makes hybrid nanofluids better at heat transmission than regular ones.Thermal systems including cooling technologies,thermal coatings,and electronic heat management benefit from these findings.
文摘Maximizing the efficiency of thermal engineering equipment involves minimizing entropy generation,which arises from irreversible processes.This study examines thermal transport and entropy generation in viscous flow over a radially stretching disk,incorporating the effects of magnetohydrodynamics(MHD),viscous dissipation,Joule heating,and radiation.Similarity transformations are used to obtain dimensionless nonlinear ordinary differential equations(ODEs)from the governing coupled partial differential equations(PDEs).The converted equations are then solved by using the BVP4C solver in MATLAB.To validate the findings,the results are compared with previously published studies under fixed parameter conditions,demonstrating strong agreement.Various key parameters are analyzed graphically to assess their impact on velocity and temperature distributions.Additionally,Bejan number and entropy generation variations are presented for different physical parameters.The injection parameter(S<0)increases the heat transfer rate,while the suction parameter(S>0)reduces it,exhibiting similar effects on fluid velocity.The magnetic parameter(M)effectively decreases entropy generation within the range of approximately 0≤η≤0.6.Beyond this interval,its influence diminishes as entropy generation values converge,with similar trends observed for the Bejan number.Furthermore,increased thermal radiation intensity is identified as a critical factor in enhancing entropy generation and the Bejan number.
基金financially supported by the Key Research and Development Program of Hubei Province(Nos.2022BCA077 and 2022BCA082).
文摘Styrene-butadiene-styrene(SBS)modified asphalt(SA)has long found effective applications in road construction materials.When combined with fillers,SBS-modified asphalt has demonstrated promising resistance to fatigue cracking caused by temperature fluctuations and aging.In this study,molybdenum disulfide(MoS_(2))and polyphosphoric acid(PPA)were ground in naphthenic oil(NO)and subjected to mechanical activation to create PPAmodified MoS_(2),referred to as OMS-PPA.By blending various ratios of OMS-PPA with SBS-modified asphalt,composite-modified asphalts were successfully developed to enhance their overall properties.To assess the mechanical characteristics and stability of these modified asphalts,various methods were employed,including penetration factor,flow activation energy,fluorescence microscopy,and dynamic shear rheology.Additionally,the short-term aging performance was evaluated using Fourier transform infrared(FTIR)spectroscopy and nanoindentation tests.The results revealed a 3.7%decrease in the penetration-temperature coefficient for SAOMS compared to SA,while 1-SA-OMS-PPA showed an even greater reduction of 7.1%.Furthermore,after short-term aging,carboxyl group generation in SA increased by 5.93%,while SA-OMS exhibited a smaller rise of 1.36%,and 1-SA-OMS-PPA saw an increase of just 0.93%.The study also highlighted significant improvements in the hardness of these materials.The hardness change ratio for SA-OMS decreased by 43.08%,while the ratio for 1-SA-OMS-PPA saw a notable reduction of 65.16% compared to unmodified SA.These findings suggest that OMS-PPA contributed to improvements in temperature sensitivity,particle dispersibility,and resistance to shortterm aging in asphalts.The results hold significant promise for the future development of advanced asphalt-based materials with potential high-value applications in flexible pavements for highways.
文摘This study rigorously examines the interplay between viscous dissipation,magnetic effects,and thermal radiation on the flow behavior of a non-Newtonian Carreau squeezed fluid passing by a sensor surface within a micro cantilever channel,aiming to deepen our understanding of heat transport processes in complex fluid dynamics scenarios.The primary objective is to elucidate how physical operational parameters influence both the velocity of fluid flow and its temperature distribution,utilizing a comprehensive numerical approach.Employing a combination of mathematical modeling techniques,including similarity transformation,this investigation transforms complex partial differential equations into more manageable ordinary ones,subsequently solving them using the homotopy perturbation method.By analyzing the obtained solutions and presenting them graphically,alongside detailed analysis,the study sheds light on the pivotal role of significant parameters in shaping fluid movement and energy distribution.Noteworthy observations reveal a substantial increase in fluid velocity with escalating magnetic parameters,while conversely,a contrasting trend emerges in the temperature distribution,highlighting the intricate relationship between magnetic effects,flow dynamics,and thermal behavior in non-Newtonian fluids.Further,the suction velocity enhance both the local skin friction and Nusselt numbers,whereas theWeissenberg number reduces them,opposite to the effect of the power-law index.
文摘This paper investigates the mechanisms of rock failure related to axial splitting and shear failure due to hoop stresses in cylindrical specimens.The hoop stresses are caused by normal viscous stress.The rheological dynamics theory(RDT)is used,with the mechanical parameters being determined by P-and S-wave velocities.The angle of internal friction is determined by the ratio of Young's modulus and the dynamic modulus,while dynamic viscosity defines cohesion and normal viscous stress.The effect of frequency on cohesion is considered.The initial stress state is defined by the minimum cohesion at the elastic limit when axial splitting can occur.However,as radial cracks grow,the stress state becomes oblique and moves towards the shear plane.The maximum and nonlinear cohesions are defined by the rock parameters under compressive strength when the radial crack depth reaches a critical value.The efficacy and precision of RDT are validated through the presentation of ultrasonic measurements on sandstone and rock specimens sourced from the literature.The results presented in dimensionless diagrams can be utilized in microcrack zones in the absence of lateral pressure in rock masses that have undergone disintegration due to excavation.
基金supported by the Research and Innovation Fund for Graduate Students of Southwest Petroleum University(No.2022KYCX027)supported by the National Natural Science Foundation for Youth Grant(No.41902157).
文摘Studying immiscible fluid displacement patterns can provide a better understanding of displacement processes within heterogeneous porous media,thereby helping improving oil recovery and optimizing geological CO_(2) sequestration.As the injection rate of water displacing oil increases and the displacement pattern transits from capillary fingering to viscous fingering,there is a broad crossover zone between the two that can adversely affect the oil displacement efficiency.While previous studies have utilized phase diagrams to investigate the influence of the viscosity ratio and wettability of the crossover zone,fewer have studied the impact of rock heterogeneity.In this study,we created pore network models with varying degrees of heterogeneity to simulate water flooding at different injection rates.Our model quantifies capillary and viscous fingering characteristics while investigating porous media heterogeneity's role in the crossover zone.Analysis of simulation results reveals that a higher characteristic front flow rate within the crossover zone leads to earlier breakthrough and reduced displacement efficiency.Increased heterogeneity in the porous media raises injection-site pressure,lowers water saturation,and elevates the characteristic front flow rate,thereby expanding the extent of crossover zone.
基金supported by the National Key Research and Development Program of China(No.2022YFB3706704)the Academician Special Science Research Project of CCCC(No.YSZX-03-2022-01-B).
文摘To investigate the influence of different longitudinal constraint systems on the longitudinal displacement at the girder ends of a three-tower suspension bridge,this study takes the Cangrong Xunjiang Bridge as an engineering case for finite element analysis.This bridge employs an unprecedented tower-girder constraintmethod,with all vertical supports placed at the transition piers at both ends.This paper aims to study the characteristics of longitudinal displacement control at the girder ends under this novel structure,relying on finite element(FE)analysis.Initially,based on the Weigh In Motion(WIM)data,a random vehicle load model is generated and applied to the finite elementmodel.Several longitudinal constraint systems are proposed,and their effects on the structural response of the bridge are compared.The most reasonable system,balancing girder-end displacement and transitional pier stress,is selected.Subsequently,the study examines the impact of different viscous damper parameters on key structural response indicators,including cumulative longitudinal displacement at the girder ends,maximum longitudinal displacement at the girder ends,cumulative longitudinal displacement at the pier tops,maximum longitudinal displacement at the pier tops,longitudinal acceleration at the pier tops,and maximum bending moment at the pier bottoms.Finally,the coefficient of variation(CV)-TOPSIS method is used to optimize the viscous damper parameters for multiple objectives.The results show that adding viscous dampers at the side towers,in addition to the existing longitudinal limit bearings at the central tower,can most effectively reduce the response of structural indicators.The changes in these indicators are not entirely consistent with variations in damping coefficient and velocity exponent.The damper parameters significantly influence cumulative longitudinal displacement at the girder ends,cumulative longitudinal displacement at the pier tops,and maximum bending moments at the pier bottoms.The optimal damper parameters are found to be a damping coefficient of 5000 kN/(m/s)0.2 and a velocity exponent of 0.2.
文摘This study explores free convective heat transfer in an electrically conducting nanofluid flow over a moving semi-infinite flat plate under the influence of an induced magnetic field and viscous dissipation.The velocity and magnetic field vectors are aligned at a distance from the plate.The Spectral Relaxation Method(SRM)is used to numerically solve the coupled nonlinear partial differential equations,analyzing the effects of the Eckert number on heat and mass transfer.Various nanofluids containing Cu,Ag,Al_(2)O_(3),and TiO_(2) nanoparticles are examined to assess how external magnetic fields influence fluid behavior.Key parameters,including the nanoparticle volume fraction ϕ,magnetic parameter M,magnetic Prandtl number Prm,and Eckert number Ec,are evaluated for their impact on velocity,induced magnetic field,and heat transfer.Results indicate that increasing the magnetic parameter reduces velocity and magnetic field components in alumina-water nanofluids,while a higher nanoparticle volume fraction enhances the thermal boundary layer.Greater viscous dissipation(Ec)increases temperature,and Al_(2)O_(3) nanofluids exhibit higher speeds than Cu,Ag,and TiO_(2) due to density differences.Silver-water nanofluids,with their higher density,move more slowly.The SRM results closely align with those from Maple,confirming the method’s accuracy.
基金supported by JUST Start-up Fund for Science Research,the Jiangsu Natural Science Foundation(Grant No.BK20210885).
文摘The internal solitary wave(ISW)represents a frequent and severe oceanic dynamic phenomenon observed in the South China Sea,exposing marine structures to sudden loads.This paper examines the prediction model of interaction loads between ISW and FPSO,accounting for varying attack angles and incorporating ISW theories.The research demonstrates that the horizontal and transverse forces on FPSO under internal solitary waves(ISWs)comprise wave pressure difference force and viscous force,while the vertical force primarily consists of vertical wave pressure difference force.The wave pressure difference force is determined using the Froude-Krylov equation.The viscous force is derived from the tangential particle velocity induced by ISW and the viscous coefficient.The viscous coefficient formula is obtained through regression analysis of experimental data with different ISW attack angles.The research reveals that the horizontal viscous coefficient C_(vx)decreases as Reynolds number(R_(e))increases,while the transverse viscous coefficient C_(vy)initially increases and subsequently decreases with the growth of the Keulegan-Carpenter number(KC).Moreover,changes in wave propagation direction significantly affect the extreme magnitudes of both horizontal and transverse forces,and simultaneously modify the transverse force orientation,while having minimal impact on the vertical force.Additionally,the forces increase with the ISW’s amplitude.For horizontal and transverse forces,a thinner upper fluid layer generates larger forces.Comparative analysis of experimental,numerical,and theoretical results indicates strong agreement between theoretical predictions and experimental and numerical outcomes.
基金Project(52276068)supported by the National Natural Science Foundation of China。
文摘This study examines the intricate occurrences of thermal and solutal Marangoni convection in three-layered flows of viscous fluids,with a particular emphasis on their relevance to renewable energy systems.This research examines the flow of a three-layered viscous fluid,considering the combined influence of heat and solutal buoyancy driven Rayleigh-Bénard convection,as well as thermal and solutal Marangoni convection.The homotopy perturbation method is used to examine and simulate complex fluid flow and transport phenomena,providing important understanding of the fundamental physics and assisting in the optimization of various battery configurations.The inquiry examines the primary elements that influence Marangoni convection and its impact on battery performance,providing insights on possible enhancements in energy storage devices.The findings indicate that the velocity profiles shown graphically exhibit a prominent core zone characterized by the maximum speed,which progressively decreases as it approaches the walls of the channel.This study enhances our comprehension of fluid dynamics and the transmission of heat and mass in intricate systems,which has substantial ramifications for the advancement of sustainable energy solutions.
