Second-order axially moving systems are common models in the field of dynamics, such as axially moving strings, cables, and belts. In the traditional research work, it is difficult to obtain closed-form solutions for ...Second-order axially moving systems are common models in the field of dynamics, such as axially moving strings, cables, and belts. In the traditional research work, it is difficult to obtain closed-form solutions for the forced vibration when the damping effect and the coupling effect of multiple second-order models are considered.In this paper, Green's function method based on the Laplace transform is used to obtain closed-form solutions for the forced vibration of second-order axially moving systems. By taking the axially moving damping string system and multi-string system connected by springs as examples, the detailed solution methods and the analytical Green's functions of these second-order systems are given. The mode functions and frequency equations are also obtained by the obtained Green's functions. The reliability and convenience of the results are verified by several examples. This paper provides a systematic analytical method for the dynamic analysis of second-order axially moving systems, and the obtained Green's functions are applicable to different second-order systems rather than just string systems. In addition, the work of this paper also has positive significance for the study on the forced vibration of high-order systems.展开更多
A linear ultrasonic motor using longitudinal vibration of bar with varying section is proposed. The lin- ear ultrasonic motor has two varying section bars connected by semi-circumferential structure. Elliptical trajec...A linear ultrasonic motor using longitudinal vibration of bar with varying section is proposed. The lin- ear ultrasonic motor has two varying section bars connected by semi-circumferential structure. Elliptical trajecto- ries of particles are formed on top of the semi-circumferential structure outer surface where a driving foot is locat- ed. And a mover is pushed to move linearly when the driving foot is pressed onto it. Finite element model of sta- tor is built and results of harmonic analysis verify its principle. Moreover, design requirements of the motor are analyzed through finite element analysis and the results of sensitive analysis provide an efficient way to design the type of linear ultrasonic motor. Prototype test shows that the motor can afford load of 10 N at the speed of 100 mm/s.展开更多
This paper deals with the vertical vibration, the horizontal translatory and flexural vibrations of plate gate with a flat bottom under the action of unstable submerged underflow. Based on a non linear resonant oscil...This paper deals with the vertical vibration, the horizontal translatory and flexural vibrations of plate gate with a flat bottom under the action of unstable submerged underflow. Based on a non linear resonant oscillator model by which the coupled excitation mechanism between the unstable vortices and gate motion can be simulated, the differential equations for the three types of gate vibrations are established. The parameters in the equations are determined by model experiments. Then, the steady state non linear responses of the three types of gate vibrations are calculated. The calculation results are in good agreement with the experimental data of gate vibrations with different reduced velocity and gate parameters by previous researchers.展开更多
Due to low damping ratio, fiat permanent magnet linear synchronous motor＇s vibration is difficult to be damped and the accuracy is limited. The vibration suppressing results are not good enough in the existing resear...Due to low damping ratio, fiat permanent magnet linear synchronous motor＇s vibration is difficult to be damped and the accuracy is limited. The vibration suppressing results are not good enough in the existing research because only the longitudinal direction vibration is considered while the normal direction vibration is neglected. The parameters of the direct-axis current controller are set to be the same as those of the quadrature-axis current controller commonly. This causes contradiction between signal noise and response. To suppress the vibration, the electromagnetic force model of the flat permanent magnet synchronous linear motor is formulated first. Through the analysis of the effect that direct-axis current noise and quadrature-axis current noise have on both direction vibration, it can be declared that the conclusion that longitudinal direction vibration is only related to the quadrature-axis current noise while the normal direction vibration is related to both the quadrature-axis current noise and direct-axis current noise. Then, the simulation test on current loop with a low-pass filter is conducted and the results show that the low-pass filter can not suppress the vibration but makes the vibration more severe. So a vibration suppressing strategy that the proportional gain of direct-axis current controller adapted according to quadrature-axis reference current is proposed. This control strategy can suppress motor vibration by suppressing direct-axis current noise. The experiments results about the effect of Kp and Ti on normal direction vibration, longitudinal vibration and the position step response show that this strategy suppresses vibration effectively while the motor＇s motion performance is not affected. The maximum reduction of vibration can be up to 40%. In addition, current test under rated load condition is also conducted and the results show that the control strategy can avoid the conflict between the direct-axis current and the quadrature-axis current under typical load. Adaptive PI control strategy can effectively suppress the flat permanent magnet linear synchronous motor＇s vibration without affecting the motor＇s performance.展开更多
The hybrid vibration isolation, which takes advantages of both the passive and active approaches, has been an important solution for space missions. The objective of this paper is to design a vibration isolation platf...The hybrid vibration isolation, which takes advantages of both the passive and active approaches, has been an important solution for space missions. The objective of this paper is to design a vibration isolation platform for payloads on spacecrafts with the robust, wide bandwidth, and multi-degree-of-freedom(MDOF). The proposed solution is based on a parallel mechanism with six voice-coil motors(VCMs) as the actuators. The linear active disturbance resistance control(LADRC) algorithm is used for the active control. Numerical simulation results show that the vibration isolation platform performs effectively over a wide bandwidth, and the resonance introduced by the passive isolation is eliminated. The system robustness to the uncertainties of the structure is also verified by simulation.展开更多
This paper considers eigenstructure assignment in second-order linear systems via proportional plus derivative feedback. It is shown that the problem is closely related to a type of so-called second-order Sylvester ma...This paper considers eigenstructure assignment in second-order linear systems via proportional plus derivative feedback. It is shown that the problem is closely related to a type of so-called second-order Sylvester matrix equations. Through establishing two general parametric solutions to this type of matrix equations, two complete parametric methods for the proposed eigenstructure assignment problem are presented. Both methods give simple complete parametric expressions for the feedback gains and the closed-loop eigenvector matrices. The first one mainly depends on a series of singular value decompositions, and is thus numerically simple and reliable; the second one utilizes the right factorization of the system, and allows the closed-loop eigenvalues to be set undetermined and sought via certain optimization procedures. An example shows the effectiveness of the proposed approaches. Keywords Second-order linear systems - Eigenstructure assignment - Proportional plus derivative feedback - Parametric solution - Singular value decompoition - Right factorization This work was supported in part by the Chinese Outstanding Youth Foundation (No.69504002).展开更多
Linear vibration table can provide harmonic accelerations to excite the nonlinear error terms of Pendulous Integrating Gyro Accelerometer(PIGA).Integral precession calibration method is proposed to calibrate PIGA on a...Linear vibration table can provide harmonic accelerations to excite the nonlinear error terms of Pendulous Integrating Gyro Accelerometer(PIGA).Integral precession calibration method is proposed to calibrate PIGA on a linear vibration table in this paper.Based on the precise expressions of PIGA’s inputs,the error calibration model of PIGA is established.Precession angular velocity errors of PIGA are suppressed by integer periodic precession and the errors caused by non-integer periods vibrating are compensated.The complete calibration process,including planning,preparation,PIGA testing,and coefficient identification,is designed to optimize the test operations and evaluate the calibration results.The effect of the main errors on calibration uncertainty is analyzed and the relative sensitivity function is proposed to further optimize the test positions.Experimental and simulation results verify that the proposed 10-position calibration method can improve calibration uncertainties after compensating for the related errors.The order of calibration uncertainties of the second-and third-order coefficients are decreased to 10^(-8)(rad.s^(-1))/g^(2)and 10^(-8)(rad.s^(-1))/g3,respectively.Compared with the other two classical calibration methods,the calibration uncertainties of PIGA’s nonlinear error coefficients can be effectively reduced and the proportional residual errors are decreased less than 3×10-6(rad.s^(-1))/g by using the proposed calibration method.展开更多
Blade vibration monitoring can ensure the safe operation of aeroengine rotor blades.Among the methods of blade vibration monitoring,Blade Tip Timing(BTT)method has attracted more and more attention because of its adva...Blade vibration monitoring can ensure the safe operation of aeroengine rotor blades.Among the methods of blade vibration monitoring,Blade Tip Timing(BTT)method has attracted more and more attention because of its advantages of non-contact measurement.However,it is difficult to install the Once-Per-Revolution(OPR)probe in the confined space of aeroengine,and the failure and instability of the OPR signal will reduce the reliability of the blade vibration analysis results,which directly affects the accuracy of the blade vibration parameters identification.The Multi-Probe linear fitting and Time of Arrival(ToA)Linear Correction method based on the BTT(MP-LC-BTT)without OPR is proposed to reduce the errors of single probe linear fitting method for blade vibration displacement analysis.The proposed method can also correct the calculation error of blade vibration displacement due to the nonlinear change of rotation speed,which can improve the analysis accuracy of the blade vibration displacement.A new blade vibration model conforming to the actual vibration characteristics is established,and the effectiveness of the proposed method is verified by numerical simulation.Finally,the reliability and accuracy of the MP-LC-BTT method have been verified by the experiments which include two high-speed blade test-benches and an industrial axial fan.This method can be used in the actual aero-engine monitoring instead of the BTT method with OPR.展开更多
This paper deals with the idea of the orthogonal functions in the equivalent linearization of the nonlinear systems. Block Pulse （BP） function gives effective tools to approximate complex problems. The aim of this w...This paper deals with the idea of the orthogonal functions in the equivalent linearization of the nonlinear systems. Block Pulse （BP） function gives effective tools to approximate complex problems. The aim of this work is on using properties of the BP function as an orthogonal function in process of linearization. The BP functions have been used to propose an equivalent linearization method in the time domain to determine the unknown linearization coefficients. The accuracy of the proposed method compared with the other equivalent linearization approaches, including the regulation linearization and the dual criterion linearization methods. This study exploited the nonlinear Van der Pol oscillator system under stationary random excitation to demonstrate the feasibility of the proposed method. The validity of the analytical method is verified by applying different values of nonlinearity and intensity of excitation. Besides, by comparing the mean-square responses and frequency response functions of the linearized systems for a wide range of nonlinearity depicted the present method is in agreement with other methods.展开更多
A nonlinear seismic analysis method for complex frame structures subjected to sta- tionary random ground excitations is proposed.The nonlinear elasto-plastic behaviors may take place only on a small part of the struct...A nonlinear seismic analysis method for complex frame structures subjected to sta- tionary random ground excitations is proposed.The nonlinear elasto-plastic behaviors may take place only on a small part of the structure.The Bouc-Wen differential equation model is used to model the hysteretic characteristics of the nonlinear components.The Pseudo Excitation Method (PEM)is used in solving the linearized random differential equations to replace the solution of the less efficient Lyapunov equation.Numerical results of a real bridge show that the method proposed is effective for practical engineering analysis.展开更多
In this paper, the normal Luenberger function observer design for second-order descriptor linear systems is considered. It is shown that the main procedure of the design is to solve a so-called second-order generalize...In this paper, the normal Luenberger function observer design for second-order descriptor linear systems is considered. It is shown that the main procedure of the design is to solve a so-called second-order generalized Sylvester-observer matrix equation. Based on an explicit parametric solution to this equation, a parametric solution to the normal Luenberger function observer design problem is given. The design degrees of freedom presented by explicit parameters can be further utilized to achieve some additional design requirements.展开更多
In this research the tail equivalent linearization method(TELM)has been extended to study structures with degrading materials.The responses of such structures to excitations are non-stationary,even if the excitations ...In this research the tail equivalent linearization method(TELM)has been extended to study structures with degrading materials.The responses of such structures to excitations are non-stationary,even if the excitations are stationary.Non-stationary behavior of the system cannot be considered by conventional TELM.Applying the conventional TELM,the only distinction in the design point excitation for two stationary excitations with diff erent durations is in the addition of a zero value part at the beginning of the design point of the longer excitation.This means that the failure probability is the same for the non-stationary systems under excitations with diff erent durations.Therefore,this solution cannot be correct.In this study,in using TELM for systems with degrading materials,hysteretic energy is replaced by average hysteretic energy,calculated by averaging the obtained hysteretic energy of the structure subjected to a few random sample load realization.In this way,the degradation parameters under design point coincide with those under sample load realizations.Since the average of the hysteretic energy is converges very fast,the modifi ed TELM only requires about tens to hundreds solutions of the response in addition to the ordinary calculations of conventional TELM.展开更多
The weakly forced vibration of an axially moving viscoelastic beam is inves- tigated. The viscoelastic material of the beam is constituted by the standard linear solid model with the material time derivative involved....The weakly forced vibration of an axially moving viscoelastic beam is inves- tigated. The viscoelastic material of the beam is constituted by the standard linear solid model with the material time derivative involved. The nonlinear equations governing the transverse vibration are derived from the dynamical, constitutive, and geometrical relations. The method of multiple scales is used to determine the steady-state response. The modulation equation is derived from the solvability condition of eliminating secular terms. Closed-form expressions of the amplitude and existence condition of nontrivial steady-state response are derived from the modulation equation. The stability of non- trivial steady-state response is examined via the Routh-Hurwitz criterion.展开更多
A simple method for disturbance decoupling for matrix second-order linear systems is proposed directly in matrix second-order framework via Luenberger function observers based on complete parametric eigenstructure ass...A simple method for disturbance decoupling for matrix second-order linear systems is proposed directly in matrix second-order framework via Luenberger function observers based on complete parametric eigenstructure assignment. By introducing the H2 norm of the transfer function from disturbance to estimation error, sufficient and necessary conditions for disturbance decoupling in matrix second-order linear systems are established and are arranged into constraints on the design parameters via Luenberger function observers in terms of the closed-loop eigenvalues and the group of design parameters provided by the eigenstructure assignment approach. Therefore, the disturbance decoupling problem is converted into an eigenstructure assignment problem with extra parameter constraints. A simple example is investigated to show the effect and simplicity of the approach.展开更多
The main purpose of this article is to study the existence theories of global meromorphic solutions for some second-order linear differential equations with meromorphic coefficients, which perfect the solution theory ...The main purpose of this article is to study the existence theories of global meromorphic solutions for some second-order linear differential equations with meromorphic coefficients, which perfect the solution theory of such equations.展开更多
The non-linear forced vibration of axially moving viscoelastic beams excited by the vibration of the supporting foundation is investigated. A non-linear partial-differential equation governing the transverse motion is...The non-linear forced vibration of axially moving viscoelastic beams excited by the vibration of the supporting foundation is investigated. A non-linear partial-differential equation governing the transverse motion is derived from the dynamical, constitutive equations and geometrical relations. By referring to the quasi-static stretch assumption, the partial-differential non-linearity is reduced to an integro-partial-differential one. The method of multiple scales is directly applied to the governing equations with the two types of non-linearity, respectively. The amplitude of near- and exact-resonant steady state is analyzed by use of the solvability condition of eliminating secular terms. Numerical results are presented to show the contributions of foundation vibration amplitude, viscoelastic damping, and nonlinearity to the response amplitude for the first and the second mode.展开更多
In order to clarify the mechanism and main influencing factors of the vibration energy coupling transmission with a dual-piston structure,a thermodynamic and dynamic coupling model of the free piston linear generator(...In order to clarify the mechanism and main influencing factors of the vibration energy coupling transmission with a dual-piston structure,a thermodynamic and dynamic coupling model of the free piston linear generator(FPLG)was established.The system energy conversion,vibration energy coupling transmission,and influencing factors were studied in detail.The coupling transmission paths and the secondary influence mechanism from in-cylinder combustion on vibration energy transmission were obtained.In addition,the influence of the movement characteristics of the dual-piston on the vibration energy transmission was studied,and the typical parameter variation law was obtained,which provides theoretical guidance for the subsequent vibration reduction design of the FPLG.展开更多
In this paper, the nonlinear free vibration behaviors of the piezoelectric semiconductor(PS) doubly-curved shell resting on the Pasternak foundation are studied within the framework of the nonlinear drift-diffusion(NL...In this paper, the nonlinear free vibration behaviors of the piezoelectric semiconductor(PS) doubly-curved shell resting on the Pasternak foundation are studied within the framework of the nonlinear drift-diffusion(NLDD) model and the first-order shear deformation theory. The nonlinear constitutive relations are presented, and the strain energy, kinetic energy, and virtual work of the PS doubly-curved shell are derived.Based on Hamilton's principle as well as the condition of charge continuity, the nonlinear governing equations are achieved, and then these equations are solved by means of an efficient iteration method. Several numerical examples are given to show the effect of the nonlinear drift current, elastic foundation parameters as well as geometric parameters on the nonlinear vibration frequency, and the damping characteristic of the PS doublycurved shell. The main innovations of the manuscript are that the difference between the linearized drift-diffusion(LDD) model and the NLDD model is revealed, and an effective method is proposed to select a proper initial electron concentration for the LDD model.展开更多
Energy preservation is one of the key components in developing eco-friendly machines.In industry,the majority of machines lose a considerable amount of energy through mechanical vibrations.However,the wasted energy th...Energy preservation is one of the key components in developing eco-friendly machines.In industry,the majority of machines lose a considerable amount of energy through mechanical vibrations.However,the wasted energy through vibration can be utilized as a renewable energy source to compensate for the overall energy loss.The research work presented in this paper discusses the ability to design a linear power generator utilizing Nd Fe-B magnets,which can generate energy through mechanical vibrations.A pilot model was developed and simulated to understand the efficiency and limitation.The results showed that the model could reduce 14% rotor bulk with a marginal impact on the current generation.展开更多
The issue of designing a type of generalized Luenberger observers for matrix second-order linear (MSOL) systems was addressed in the matrix second-order framework. By introducing the concept of stable matrix pair for ...The issue of designing a type of generalized Luenberger observers for matrix second-order linear (MSOL) systems was addressed in the matrix second-order framework. By introducing the concept of stable matrix pair for MSOL systems, sufficient and necessary conditions for the design of the type of generalized Luenberger observers were given under the assumption of controllability and observability of the MSOL system. Based on the proposed conditions and the right coprime factorization of the system, a parametric approach to the design of such type of observers was presented. The proposed approach provides all the degrees of design freedom, which can be further utilized to achieve additional system specifications. A spring-mass system was utilized to show the effect of the proposed method.展开更多
基金Project supported by the National Natural Science Foundation of China (No. 12272323)。
文摘Second-order axially moving systems are common models in the field of dynamics, such as axially moving strings, cables, and belts. In the traditional research work, it is difficult to obtain closed-form solutions for the forced vibration when the damping effect and the coupling effect of multiple second-order models are considered.In this paper, Green's function method based on the Laplace transform is used to obtain closed-form solutions for the forced vibration of second-order axially moving systems. By taking the axially moving damping string system and multi-string system connected by springs as examples, the detailed solution methods and the analytical Green's functions of these second-order systems are given. The mode functions and frequency equations are also obtained by the obtained Green's functions. The reliability and convenience of the results are verified by several examples. This paper provides a systematic analytical method for the dynamic analysis of second-order axially moving systems, and the obtained Green's functions are applicable to different second-order systems rather than just string systems. In addition, the work of this paper also has positive significance for the study on the forced vibration of high-order systems.
基金Supported by the National Natural Science Foundation of China(50735002)~~
文摘A linear ultrasonic motor using longitudinal vibration of bar with varying section is proposed. The lin- ear ultrasonic motor has two varying section bars connected by semi-circumferential structure. Elliptical trajecto- ries of particles are formed on top of the semi-circumferential structure outer surface where a driving foot is locat- ed. And a mover is pushed to move linearly when the driving foot is pressed onto it. Finite element model of sta- tor is built and results of harmonic analysis verify its principle. Moreover, design requirements of the motor are analyzed through finite element analysis and the results of sensitive analysis provide an efficient way to design the type of linear ultrasonic motor. Prototype test shows that the motor can afford load of 10 N at the speed of 100 mm/s.
文摘This paper deals with the vertical vibration, the horizontal translatory and flexural vibrations of plate gate with a flat bottom under the action of unstable submerged underflow. Based on a non linear resonant oscillator model by which the coupled excitation mechanism between the unstable vortices and gate motion can be simulated, the differential equations for the three types of gate vibrations are established. The parameters in the equations are determined by model experiments. Then, the steady state non linear responses of the three types of gate vibrations are calculated. The calculation results are in good agreement with the experimental data of gate vibrations with different reduced velocity and gate parameters by previous researchers.
基金supported by National Science and Technology Major Projects of China (Grant Nos. 2011ZX04016-011,2009ZX04010-022)
文摘Due to low damping ratio, fiat permanent magnet linear synchronous motor＇s vibration is difficult to be damped and the accuracy is limited. The vibration suppressing results are not good enough in the existing research because only the longitudinal direction vibration is considered while the normal direction vibration is neglected. The parameters of the direct-axis current controller are set to be the same as those of the quadrature-axis current controller commonly. This causes contradiction between signal noise and response. To suppress the vibration, the electromagnetic force model of the flat permanent magnet synchronous linear motor is formulated first. Through the analysis of the effect that direct-axis current noise and quadrature-axis current noise have on both direction vibration, it can be declared that the conclusion that longitudinal direction vibration is only related to the quadrature-axis current noise while the normal direction vibration is related to both the quadrature-axis current noise and direct-axis current noise. Then, the simulation test on current loop with a low-pass filter is conducted and the results show that the low-pass filter can not suppress the vibration but makes the vibration more severe. So a vibration suppressing strategy that the proportional gain of direct-axis current controller adapted according to quadrature-axis reference current is proposed. This control strategy can suppress motor vibration by suppressing direct-axis current noise. The experiments results about the effect of Kp and Ti on normal direction vibration, longitudinal vibration and the position step response show that this strategy suppresses vibration effectively while the motor＇s motion performance is not affected. The maximum reduction of vibration can be up to 40%. In addition, current test under rated load condition is also conducted and the results show that the control strategy can avoid the conflict between the direct-axis current and the quadrature-axis current under typical load. Adaptive PI control strategy can effectively suppress the flat permanent magnet linear synchronous motor＇s vibration without affecting the motor＇s performance.
基金the National Natural Science Foundation of China (No. 11572215)the Fundamental Research Funds for the Central Universities (No. N160503002)the China Scholarship Council。
文摘The hybrid vibration isolation, which takes advantages of both the passive and active approaches, has been an important solution for space missions. The objective of this paper is to design a vibration isolation platform for payloads on spacecrafts with the robust, wide bandwidth, and multi-degree-of-freedom(MDOF). The proposed solution is based on a parallel mechanism with six voice-coil motors(VCMs) as the actuators. The linear active disturbance resistance control(LADRC) algorithm is used for the active control. Numerical simulation results show that the vibration isolation platform performs effectively over a wide bandwidth, and the resonance introduced by the passive isolation is eliminated. The system robustness to the uncertainties of the structure is also verified by simulation.
文摘This paper considers eigenstructure assignment in second-order linear systems via proportional plus derivative feedback. It is shown that the problem is closely related to a type of so-called second-order Sylvester matrix equations. Through establishing two general parametric solutions to this type of matrix equations, two complete parametric methods for the proposed eigenstructure assignment problem are presented. Both methods give simple complete parametric expressions for the feedback gains and the closed-loop eigenvector matrices. The first one mainly depends on a series of singular value decompositions, and is thus numerically simple and reliable; the second one utilizes the right factorization of the system, and allows the closed-loop eigenvalues to be set undetermined and sought via certain optimization procedures. An example shows the effectiveness of the proposed approaches. Keywords Second-order linear systems - Eigenstructure assignment - Proportional plus derivative feedback - Parametric solution - Singular value decompoition - Right factorization This work was supported in part by the Chinese Outstanding Youth Foundation (No.69504002).
文摘Linear vibration table can provide harmonic accelerations to excite the nonlinear error terms of Pendulous Integrating Gyro Accelerometer(PIGA).Integral precession calibration method is proposed to calibrate PIGA on a linear vibration table in this paper.Based on the precise expressions of PIGA’s inputs,the error calibration model of PIGA is established.Precession angular velocity errors of PIGA are suppressed by integer periodic precession and the errors caused by non-integer periods vibrating are compensated.The complete calibration process,including planning,preparation,PIGA testing,and coefficient identification,is designed to optimize the test operations and evaluate the calibration results.The effect of the main errors on calibration uncertainty is analyzed and the relative sensitivity function is proposed to further optimize the test positions.Experimental and simulation results verify that the proposed 10-position calibration method can improve calibration uncertainties after compensating for the related errors.The order of calibration uncertainties of the second-and third-order coefficients are decreased to 10^(-8)(rad.s^(-1))/g^(2)and 10^(-8)(rad.s^(-1))/g3,respectively.Compared with the other two classical calibration methods,the calibration uncertainties of PIGA’s nonlinear error coefficients can be effectively reduced and the proportional residual errors are decreased less than 3×10-6(rad.s^(-1))/g by using the proposed calibration method.
基金supports of the National Science and Technology Major Project,China(No.2017-Ⅲ-0009-0035)the Major Program of National Natural Science Foundation of China(No.51790513).
文摘Blade vibration monitoring can ensure the safe operation of aeroengine rotor blades.Among the methods of blade vibration monitoring,Blade Tip Timing(BTT)method has attracted more and more attention because of its advantages of non-contact measurement.However,it is difficult to install the Once-Per-Revolution(OPR)probe in the confined space of aeroengine,and the failure and instability of the OPR signal will reduce the reliability of the blade vibration analysis results,which directly affects the accuracy of the blade vibration parameters identification.The Multi-Probe linear fitting and Time of Arrival(ToA)Linear Correction method based on the BTT(MP-LC-BTT)without OPR is proposed to reduce the errors of single probe linear fitting method for blade vibration displacement analysis.The proposed method can also correct the calculation error of blade vibration displacement due to the nonlinear change of rotation speed,which can improve the analysis accuracy of the blade vibration displacement.A new blade vibration model conforming to the actual vibration characteristics is established,and the effectiveness of the proposed method is verified by numerical simulation.Finally,the reliability and accuracy of the MP-LC-BTT method have been verified by the experiments which include two high-speed blade test-benches and an industrial axial fan.This method can be used in the actual aero-engine monitoring instead of the BTT method with OPR.
文摘This paper deals with the idea of the orthogonal functions in the equivalent linearization of the nonlinear systems. Block Pulse （BP） function gives effective tools to approximate complex problems. The aim of this work is on using properties of the BP function as an orthogonal function in process of linearization. The BP functions have been used to propose an equivalent linearization method in the time domain to determine the unknown linearization coefficients. The accuracy of the proposed method compared with the other equivalent linearization approaches, including the regulation linearization and the dual criterion linearization methods. This study exploited the nonlinear Van der Pol oscillator system under stationary random excitation to demonstrate the feasibility of the proposed method. The validity of the analytical method is verified by applying different values of nonlinearity and intensity of excitation. Besides, by comparing the mean-square responses and frequency response functions of the linearized systems for a wide range of nonlinearity depicted the present method is in agreement with other methods.
基金Project supported by the National Natural Science Foundation of China(No.10072015)the National Key Base Research Special Foundation(No.G1999032805).
文摘A nonlinear seismic analysis method for complex frame structures subjected to sta- tionary random ground excitations is proposed.The nonlinear elasto-plastic behaviors may take place only on a small part of the structure.The Bouc-Wen differential equation model is used to model the hysteretic characteristics of the nonlinear components.The Pseudo Excitation Method (PEM)is used in solving the linearized random differential equations to replace the solution of the less efficient Lyapunov equation.Numerical results of a real bridge show that the method proposed is effective for practical engineering analysis.
基金This work was supported by National Natural Science Foundation of China(No.60710002)Program for Changjiang Scholars and Innovative Research Team in University(PCSIRT).
文摘In this paper, the normal Luenberger function observer design for second-order descriptor linear systems is considered. It is shown that the main procedure of the design is to solve a so-called second-order generalized Sylvester-observer matrix equation. Based on an explicit parametric solution to this equation, a parametric solution to the normal Luenberger function observer design problem is given. The design degrees of freedom presented by explicit parameters can be further utilized to achieve some additional design requirements.
文摘In this research the tail equivalent linearization method(TELM)has been extended to study structures with degrading materials.The responses of such structures to excitations are non-stationary,even if the excitations are stationary.Non-stationary behavior of the system cannot be considered by conventional TELM.Applying the conventional TELM,the only distinction in the design point excitation for two stationary excitations with diff erent durations is in the addition of a zero value part at the beginning of the design point of the longer excitation.This means that the failure probability is the same for the non-stationary systems under excitations with diff erent durations.Therefore,this solution cannot be correct.In this study,in using TELM for systems with degrading materials,hysteretic energy is replaced by average hysteretic energy,calculated by averaging the obtained hysteretic energy of the structure subjected to a few random sample load realization.In this way,the degradation parameters under design point coincide with those under sample load realizations.Since the average of the hysteretic energy is converges very fast,the modifi ed TELM only requires about tens to hundreds solutions of the response in addition to the ordinary calculations of conventional TELM.
基金Project supported by the National Natural Science Foundation of China (No.10972143)the Shanghai Municipal Education Commission (No.YYY11040)+2 种基金the Shanghai Leading Academic Discipline Project (No.J51501)the Leading Academic Discipline Project of Shanghai Institute of Technology(No.1020Q121001)the Start Foundation for Introducing Talents of Shanghai Institute of Technology (No.YJ2011-26)
文摘The weakly forced vibration of an axially moving viscoelastic beam is inves- tigated. The viscoelastic material of the beam is constituted by the standard linear solid model with the material time derivative involved. The nonlinear equations governing the transverse vibration are derived from the dynamical, constitutive, and geometrical relations. The method of multiple scales is used to determine the steady-state response. The modulation equation is derived from the solvability condition of eliminating secular terms. Closed-form expressions of the amplitude and existence condition of nontrivial steady-state response are derived from the modulation equation. The stability of non- trivial steady-state response is examined via the Routh-Hurwitz criterion.
文摘A simple method for disturbance decoupling for matrix second-order linear systems is proposed directly in matrix second-order framework via Luenberger function observers based on complete parametric eigenstructure assignment. By introducing the H2 norm of the transfer function from disturbance to estimation error, sufficient and necessary conditions for disturbance decoupling in matrix second-order linear systems are established and are arranged into constraints on the design parameters via Luenberger function observers in terms of the closed-loop eigenvalues and the group of design parameters provided by the eigenstructure assignment approach. Therefore, the disturbance decoupling problem is converted into an eigenstructure assignment problem with extra parameter constraints. A simple example is investigated to show the effect and simplicity of the approach.
基金Supported by the National Natural Science Foundation of China(11101096 )Guangdong Natural Science Foundation (S2012010010376, S201204006711)
文摘The main purpose of this article is to study the existence theories of global meromorphic solutions for some second-order linear differential equations with meromorphic coefficients, which perfect the solution theory of such equations.
基金Project supported by the National Natural Science Foundation of China (No. 10472060)Natural Science Founda-tion of Shanghai Municipality (No. 04ZR14058)Doctor Start-up Foundation of Shenyang Institute of Aeronautical Engineering (No. 05YB04).
文摘The non-linear forced vibration of axially moving viscoelastic beams excited by the vibration of the supporting foundation is investigated. A non-linear partial-differential equation governing the transverse motion is derived from the dynamical, constitutive equations and geometrical relations. By referring to the quasi-static stretch assumption, the partial-differential non-linearity is reduced to an integro-partial-differential one. The method of multiple scales is directly applied to the governing equations with the two types of non-linearity, respectively. The amplitude of near- and exact-resonant steady state is analyzed by use of the solvability condition of eliminating secular terms. Numerical results are presented to show the contributions of foundation vibration amplitude, viscoelastic damping, and nonlinearity to the response amplitude for the first and the second mode.
文摘In order to clarify the mechanism and main influencing factors of the vibration energy coupling transmission with a dual-piston structure,a thermodynamic and dynamic coupling model of the free piston linear generator(FPLG)was established.The system energy conversion,vibration energy coupling transmission,and influencing factors were studied in detail.The coupling transmission paths and the secondary influence mechanism from in-cylinder combustion on vibration energy transmission were obtained.In addition,the influence of the movement characteristics of the dual-piston on the vibration energy transmission was studied,and the typical parameter variation law was obtained,which provides theoretical guidance for the subsequent vibration reduction design of the FPLG.
基金Project supported by the National Natural Science Foundation of China (Nos. 12172236, 12202289,and U21A20430)the Science and Technology Research Project of Hebei Education Department of China (No. QN2022083)。
文摘In this paper, the nonlinear free vibration behaviors of the piezoelectric semiconductor(PS) doubly-curved shell resting on the Pasternak foundation are studied within the framework of the nonlinear drift-diffusion(NLDD) model and the first-order shear deformation theory. The nonlinear constitutive relations are presented, and the strain energy, kinetic energy, and virtual work of the PS doubly-curved shell are derived.Based on Hamilton's principle as well as the condition of charge continuity, the nonlinear governing equations are achieved, and then these equations are solved by means of an efficient iteration method. Several numerical examples are given to show the effect of the nonlinear drift current, elastic foundation parameters as well as geometric parameters on the nonlinear vibration frequency, and the damping characteristic of the PS doublycurved shell. The main innovations of the manuscript are that the difference between the linearized drift-diffusion(LDD) model and the NLDD model is revealed, and an effective method is proposed to select a proper initial electron concentration for the LDD model.
文摘Energy preservation is one of the key components in developing eco-friendly machines.In industry,the majority of machines lose a considerable amount of energy through mechanical vibrations.However,the wasted energy through vibration can be utilized as a renewable energy source to compensate for the overall energy loss.The research work presented in this paper discusses the ability to design a linear power generator utilizing Nd Fe-B magnets,which can generate energy through mechanical vibrations.A pilot model was developed and simulated to understand the efficiency and limitation.The results showed that the model could reduce 14% rotor bulk with a marginal impact on the current generation.
文摘The issue of designing a type of generalized Luenberger observers for matrix second-order linear (MSOL) systems was addressed in the matrix second-order framework. By introducing the concept of stable matrix pair for MSOL systems, sufficient and necessary conditions for the design of the type of generalized Luenberger observers were given under the assumption of controllability and observability of the MSOL system. Based on the proposed conditions and the right coprime factorization of the system, a parametric approach to the design of such type of observers was presented. The proposed approach provides all the degrees of design freedom, which can be further utilized to achieve additional system specifications. A spring-mass system was utilized to show the effect of the proposed method.
