The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospher...The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospheric winds.In this study,we used the red-line measurements of MIGHTI to compare with the results estimated by Horizontal Wind Model 14(HWM14).The data selected included both the geomagnetic quiet period(December 2019 to August 2022)and the geomagnetic storm on August 26-28,2021.During the geomagnetic quiet period,the estimations of neutral winds from HWM14 showed relatively good agreement with the observations from ICON.According to the ICON observations,near the equator,zonal winds reverse from westward to eastward at around 06:00 local time(LT)at higher altitudes,and the stronger westward winds appear at later LTs at lower altitudes.At around 16:00 LT,eastward winds at 300 km reverse to westward,and vertical gradients of zonal winds similar to those at sunrise hours can be observed.In the middle latitudes,zonal winds reverse about 2-4 h earlier.Meridional winds vary more significantly than zonal winds with seasonal and latitudinal variations.According to the ICON observations,in the northern low latitudes,vertical reversals of meridional winds are found at 08:00-13:00 LT from 300 to 160 km and at around 18:00 LT from 300 to 200 km during the June solstice.Similar reversals of meridional winds are found at 04:00-07:00 LT from 300 to 160 km and at 22:00-02:00 LT from 270 to 200 km during the December solstice.In the southern low latitudes,meridional wind reversals occur at 08:00-11:00 LT from 200 to 160 km and at 21:00-02:00 LT from 300 to 200 km during the June solstice.During the December solstice,reversals of the meridional wind appear at 20:00-01:00 LT below 200 km and at 06:00-11:00 LT from 300 to 160 km.In the northern middle latitudes,the northward winds are dominant at 08:00-14:00 LT at 230 km during the June solstice.Northward winds persist until 16:00 LT at 160 and 300 km.During the December solstice,the northward winds are dominant from 06:00 to 21:00 LT.The vertical variations in neutral winds during the geomagnetic storm on August 26-28 were analyzed in detail.Both meridional and zonal winds during the active geomagnetic period observed by ICON show distinguishable vertical shear structures at different stages of the storm.On the dayside,during the main phase,the peak velocities of westward winds extend from a higher altitude to a lower altitude,whereas during the recovery phase,the peak velocities of the westward winds extend from lower altitudes to higher altitudes.The velocities of the southward winds are stronger at lower altitudes during the storm.These vertical structures of horizontal winds during the storm could not be reproduced by the HWM14 wind estimations,and the overall response to the storm of the horizontal winds in the low and middle latitudes is underestimated by HWM14.The ICON observations provide a good dataset for improving the HWM wind estimations in the middle and upper atmosphere,especially the vertical variations.展开更多
Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Cu...Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Currently,there is no commercial vaccine or specific treatment available to prevent ZIKV infection.Therefore,controlling the epidemic's spread relies on preventing mosquitoes from transmitting the virus.Although various studies have explored the transmission of ZIKV between mosquitoes and vertebrate hosts,comprehensive research on potential mosquito-to-mosquito transmission of ZIKV remains limited.In this study,we conducted systematic laboratory investigations to assess the ability of ZIKV to spread among mosquitoes,and to evaluate the impact of ZIKV infection on mosquito development.Our findings revealed that ZIKV can be transmitted between Aedes aegypti mosquitoes both vertically and horizontally,through oviposition and contact between mosquitoes of the same or opposite sex.Additionally,we observed that ZIKV infection resulted in a reduction in the number of mosquito eggs but an increase in their size.The widespread distribution of ZIKV in infected mosquitoes and the altered levels of hormone related genes following viral infection were noted,which may contribute to viral transmission among mosquitoes and affect mosquito development.This research provides systematic experimental evidence of ZIKV transmission among mosquitoes,which is crucial for developing novel strategies to disrupt the spread of orthoflaviviruses and other mosquitoborne pathogens.展开更多
Elucidating the mechanisms underlying community assembly remains a central question in community ecology,especially in aquatic ecosystems disrupted by human activities.Understanding the causes and consequences of comm...Elucidating the mechanisms underlying community assembly remains a central question in community ecology,especially in aquatic ecosystems disrupted by human activities.Understanding the causes and consequences of community responses to changing environment is essential for revealing the ecological effects of anthropogenic disturbances and proposing practical strategies for ecological restoration.While stochastic dispersal and species sorting are known to influence local biological communities,most studies have focused on horizontal dispersal,often neglecting the vertical exchange of organisms between planktonic and sedimentary communities when studying stochastic dispersal.We used a highly disturbed urban river in Beijing as a model system to investigate the relative roles of stochastic dispersal versus species sorting driven by local pollution,as well as two components of stochastic dispersal,vertical exchange and horizontal dispersal,in structuring local bacterial communities.Our integrated analyses of planktonic and sedimentary bacterial communities revealed that,despite different spatial patterns along the river,both types of bacterial communities were primarily shaped by stochastic dispersal processes rather than species sorting influenced by the environmental gradient.Notably,in addition to the effect of horizontal dispersal along the river,the vertical exchange between planktonic and sedimentary bacterial communities significantly contributed to the formation of local communities.These findings suggest that both vertical exchange and horizontal dispersal should be considered when assessing the role of stochastic dispersal in shaping local community structure in microbial communities.展开更多
BACKGROUND Lateral window approach for sinus floor lift is commonly used for vertical bone augmentation in cases when the residual bone height is less than 5 mm.However,managing cases becomes more challenging when a m...BACKGROUND Lateral window approach for sinus floor lift is commonly used for vertical bone augmentation in cases when the residual bone height is less than 5 mm.However,managing cases becomes more challenging when a maxillary sinus pseudocyst is present or when there is insufficient bone width.In this case,we utilized the bone window prepared during the lateral window sinus lift as a shell for horizontal bone augmentation.This allowed for simultaneous horizontal and vertical bone augmentation immediately after the removal of the maxillary sinus pseudocyst.CASE SUMMARY A 28-year-old female presented to our clinic with the chief complaint of missing upper left posterior teeth.Intraoral examination showed a horizontal deficiency of the alveolar ridge contour.The height of the alveolar bone was approximately 3.6 mm on cone beam computed tomography(CBCT).And a typical well-defined'dome-shaped'lesion in maxillary sinus was observed on CBCT imaging.The lateral bony window was prepared using a piezo-ultrasonic device,then the bony window was fixed to the buccal side of the 26 alveolar ridge using a titanium screw with a length of 10 mm and a diameter of 1.5 mm.The space between the bony window and the alveolar ridge was filled with Bio-Oss,covered with a Bio-Gide collagen membrane,and subsequently sutured.Nine months later,the patient’s bone width increased from 4.8 to 10.5 mm,and the bone height increased from 3.6 to 15.6 mm.Subsequently,a Straumann^(■)4.1 mm×10 mm implant was placed.The final all-ceramic crown restoration was completed four months later,and both clinical and radiographic examinations showed that the implant was successful,and the patient was satisfied with the results.CONCLUSION The bone block harvested from the lateral window sinus lift can be used for simultaneous horizontal bone augmentation acting as a shell for good two-dimensional bone augmentation.展开更多
In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data silos.Vertical Federated Learning(VFL)has emerged as a promising approach...In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data silos.Vertical Federated Learning(VFL)has emerged as a promising approach to facilitate such collaboration,allowing diverse entities to collectively enhance machine learning models without the need to share sensitive training data.However,existing works have highlighted VFL’s susceptibility to privacy inference attacks,where an honest but curious server could potentially reconstruct a client’s raw data from embeddings uploaded by the client.This vulnerability poses a significant threat to VFL-based intelligent railway transportation systems.In this paper,we introduce SensFL,a novel privacy-enhancing method to against privacy inference attacks in VFL.Specifically,SensFL integrates regularization of the sensitivity of embeddings to the original data into the model training process,effectively limiting the information contained in shared embeddings.By reducing the sensitivity of embeddings to the original data,SensFL can effectively resist reverse privacy attacks and prevent the reconstruction of the original data from the embeddings.Extensive experiments were conducted on four distinct datasets and three different models to demonstrate the efficacy of SensFL.Experiment results show that SensFL can effectively mitigate privacy inference attacks while maintaining the accuracy of the primary learning task.These results underscore SensFL’s potential to advance privacy protection technologies within VFL-based intelligent railway systems,addressing critical security concerns in collaborative learning environments.展开更多
To improve the vertical axis wind turbine(VAWT)design,the angle of attack(AOA)and airfoil data must be treated correctly.The present paper develops a method for determining AOA on a VAWT based on computational fluid d...To improve the vertical axis wind turbine(VAWT)design,the angle of attack(AOA)and airfoil data must be treated correctly.The present paper develops a method for determining AOA on a VAWT based on computational fluid dynamics(CFD)analysis.First,a CFD analysis of a two-bladed VAWT equipped with a NACA 0012 airfoil is conducted.The thrust and power coefficients are validated through experiments.Second,the blade force and velocity data at monitoring points are collected.The AOA at different azimuth angles is determined by removing the blade self-induction at the monitoring point.Then,the lift and drag coefficients as a function of AOA are extracted.Results show that this method is independent of the monitoring points selection located at certain distance to the blades and the extracted dynamic stall hysteresis is more precise than the one with the“usual”method without considering the self-induction from bound vortices.展开更多
The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmosphe...The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmospheric pressure,which is primarily variable in the vertical direction.Current atmospheric pressure is either site-specific or has limited spatial coverage,necessitating vertical corrections for broader applicability.This study introduces a model that uses a Gaussian function for the vertical correction of atmospheric pressure when in situ meteorological observations are unavailable.Validation with the fifth-generation European Centre for Medium-Range Weather Forecasts reanalysis(ERA5)reveals an average Bias and RMS for the new model of 0.31 h Pa and 2.96 h Pa,respectively.This corresponds to improvements of 37.5%and 80.3%in terms of RMS compared to two commonly used models(T0and Tvmodels)that require in situ meteorological observations,respectively.Additional validation with radiosonde data shows an average Bias and RMS of 1.85 h Pa and 4.87 h Pa,corresponding to the improvement of 42.8%and 71.1%in RMS compared with T0and Tv models,respectively.These accuracies are sufficient for calculating ZHD to an accuracy of 1 mm by performing atmospheric pressure vertical correction.The new model can correct atmospheric pressure from meteorological stations or numerical weather forecasts to different heights of the troposphere.展开更多
Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stre...Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stress,the three-dimensional(3D)stress tensors at 89 measuring points determined using an improved overcoring technique in nine mines in China were adopted,a newly defined characteristic parameter C_(ERP)was proposed as an indicator for evaluating the structural properties of rock masses,and a fuzzy relation matrix was established using the information distribution method.The results indicate that both the vertical stress and horizontal stress exhibit a good linear growth relationship with depth.There is no remarkable correlation between the elastic modulus,Poisson's ratio and depth,and the distribution of data points is scattered and messy.Moreover,there is no obvious relationship between the rock quality designation(RQD)and depth.The maximum horizontal stress σ_(H) is a function of rock properties,showing a certain linear relationship with the C_(ERP)at the same depth.In addition,the overall change trend of σ_(H) determined by the established fuzzy identification method is to increase with the increase of C_(ERP).The fuzzy identification method also demonstrates a relatively detailed local relationship betweenσ_H and C_(ERP),and the predicted curve rises in a fluctuating way,which is in accord well with the measured stress data.展开更多
van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type phot...van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type photodetectors are not compatible with large-areaarray fabrication and show unimpressive performance in self-powered mode.Herein,vertical 1D GaN nanorods arrays(NRAs)/2D MoS_(2)/PEDOT:PSS in wafer scale have been proposed for self-powered flexible photodetectors arrays firstly.The as-integrated device without external bias under weak UV illumination exhibits a competitive responsivity of 1.47 A W^(−1)and a high detectivity of 1.2×10^(11)Jones,as well as a fast response speed of 54/71μs,thanks to the strong light absorption of GaN NRAs and the efficient photogenerated carrier separation in type-II heterojunction.Notably,the strain-tunable photodetection performances of device have been demonstrated.Impressively,the device at−0.78%strain and zero bias reveals a significantly enhanced photoresponse with a responsivity of 2.47 A W^(−1),a detectivity of 2.6×10^(11)Jones,and response times of 40/45μs,which are superior to the state-of-the-art self-powered flexible photodetectors.This work presents a valuable avenue to prepare tunable vdWs heterostructures for self-powered flexible photodetection,which performs well in flexible sensors.展开更多
The China Spallation Neutron Source(CSNS)is the fourth pulsed accelerator-driven neutron source in the world,and it achieved its design target of 100 kW in 2020.The planned China Spallation Neutron Source Phase II(CSN...The China Spallation Neutron Source(CSNS)is the fourth pulsed accelerator-driven neutron source in the world,and it achieved its design target of 100 kW in 2020.The planned China Spallation Neutron Source Phase II(CSNS-II)commenced in 2024.The CSNS-II linac design primarily involves the addition of a radio-frequency ion source and a section of a superconducting linear accelerator composed of two types of superconducting cavities,namely double-spoke and six-cell elliptical cavities,after the drift tube linac(DTL).The development of the double-spoke superconducting cavity began in early 2021,and by January 2023,the welding,post-processing,and vertical tests of two 324 MHz double-spoke cavity prototypes were completed,with vertical test gradients of 11.6 and 15 MV/m,and Q_(0)≥3×10^(10)@E_(acc)≤10 MV/m.The R&D of the cryomodule began in January 2022.In October 2023,the clean assembly of the double-spoke cavity string and cold mass installation of the cryomodule commenced,with the installation of the cryomodule and valve box completing in two months.In January 2024,a horizontal test of the cryomodule was completed,making it the first double-spoke cavity cryomodule in China.The test results showed that the maximum gradients of the two superconducting cavities at a pulse width of 4 ms and repetition frequency of 25 Hz were 12.8 and 15.2 MV/m,respectively.This article provides a detailed introduction to the double-spoke superconducting cavity,tuner,coupler,and cryomodule,elaborates on the clean assembly of the cavity string and cold mass installation of the cryomodule,and provides a detailed analysis of the horizontal test results.展开更多
This article presents four techniques for assessing verticality:the plumb line approach,the total station distance technique,the three-point centering method,and the centroid method.Given the significant error associa...This article presents four techniques for assessing verticality:the plumb line approach,the total station distance technique,the three-point centering method,and the centroid method.Given the significant error associated with the total station horizontal distance technique when measuring circular piers,this paper proposes the centroid method.This method calculates verticality by determining the coordinates of the center points at both ends of the pier.Experimental findings indicate that the centroid method achieves accuracy in measuring the verticality of circular piers comparable to the three-point centering method,while offering a faster inspection process.Furthermore,the paper explores the concept of composite verticality and validates the effectiveness of the centroid method in measuring composite verticality and its practical applications through comparative experiments.展开更多
Airborne area-array whisk-broom imaging systems typically adopt constant-speed scanning schemes.For large-inertia scanning systems,constant-speed scanning requires substantial time to complete the reversal motion,redu...Airborne area-array whisk-broom imaging systems typically adopt constant-speed scanning schemes.For large-inertia scanning systems,constant-speed scanning requires substantial time to complete the reversal motion,reducing the system's adaptability to high-speed reversal scanning and decreasing scanning efficiency.This study proposes a novel sinusoidal variable-speed roll scanning strategy,which reduces abrupt changes in speed and acceleration,minimizing time loss during reversals.Based on the forward image motion compensation strategy in the pitch direction,we establish a line-of-sight(LOS)position calculation model with vertical flight path correction(VFPC),ensuring that the central LOS of the scanned image remains stable on the same horizontal line,facilitating accurate image stitching in whisk-broom imaging.Through theoretical analysis and simulation experiments,the proposed method improves the scanning efficiency by approximately 18.6%at a 90o whiskbroom imaging angle under the same speed height ratio conditions.The new VFPC method enables wide-field,high-resolution imaging,achieving single-line LOS horizontal stability with an accuracy of better than O.4 mrad.The research is of great significance to promote the further development of airborne area-array whisk-broom imaging technology toward wider fields of view,higher speed height ratios,and greater scanning efficiency.展开更多
The escalating global dissemination of plasmid-mediated antibiotic resistance poses a formidable threat to global health.Conjugation stands as a pivotal mechanism for horizontal gene transfer among bacterial populatio...The escalating global dissemination of plasmid-mediated antibiotic resistance poses a formidable threat to global health.Conjugation stands as a pivotal mechanism for horizontal gene transfer among bacterial populations,facilitating the spread of antibiotic resistance genes(ARGs).Microelectrolysis has garnered attention as an efficacious strategy for mitigating antibiotic concentrations in wastewater,yet its potential impact on ARG horizontal transfer remain largely unexplored.This comprehensive investigation unveils that microelectrolysis not only influences but significantly accelerates the conjugative transfer of ARG-harboring plasmids.Remarkably,this phenomenon is corroborated at the microbial community scale,underscoring its ecological relevance.Alarmingly,the study highlights the vulnerability of intestinalmicroorganisms to acquire antibiotic resistance under electrolytic stimulation,posing heightened risks to both animal and human health.Delving deeper,the study elucidates the underlyingmechanisms responsible for this enhanced conjugative transfer.It reveals that microelectrolysis augments the abundance of mating-competent cells,triggers the generation of reactive oxygen species,inflicts modest membrane damage,and upregulates the expression of genes critical for conjugation.These findings collectively contribute to a more profound comprehension of the environmental dissemination dynamics and associated public health implications of ARGs in the context of wastewater treatment employing microelectrolytic technologies.展开更多
Measurements from a hyperspectral infrared(HIR) sounder onboard a satellite in geostationary orbit not only provide atmospheric thermodynamic information,but also can be used to infer dynamic information with high tem...Measurements from a hyperspectral infrared(HIR) sounder onboard a satellite in geostationary orbit not only provide atmospheric thermodynamic information,but also can be used to infer dynamic information with high temporal resolution.Radiance measurements from the Geostationary Interferometric Infrared Sounder(GIIRS),obtained with 15-min temporal resolution during Typhoon Maria(2018) and 30-min temporal resolution during Typhoon Lekima(2019),were used to derive three-dimensional(3D) horizontal winds by tracking the motion of atmospheric moisture.This work focused on the impact of assimilation of 3D winds on typhoon analyses and forecasts using the operational NWP model of the China Meteorological Administration(CMA-MESO),and improved understanding of the potential benefits of assimilating dynamic information from geostationary sounder data with higher temporal resolution.The standard deviation of the observations minus simulations revealed that the accuracy of the derived 3D winds with 15-min resolution was higher than that of derived winds with 30-min resolution.Experiments showed that the assimilation system can effectively absorb the information of the derived 3D winds,and that dynamic information from clear-sky areas can be transferred to typhoon areas.In typhoon prediction,assimilation of the derived 3D winds had greatest influence on the typhoon track,and less influence on the maximum wind speed.Assimilation of the derived 3D winds reduced the average track error by 17.4% for Typhoon Maria(2018) and by 3.5% for Typhoon Lekima(2019) during their entire 36-h forecasts initiated at different times.Assimilation of GIIRS dynamic information can substantially improve forecasts of heavy precipitation by CMAMESO.Results indicate that the assimilation of dynamic information from high-temporal-resolution geostationary HIR sounder data adds value for improved numerical weather prediction.展开更多
Plastic pollution and microplastics in sediments are a growing concern for marine ecosystems worldwide.We examined the vertical distribution and properties of microplastics in beach sediments of Xuwen Coral Reef Natio...Plastic pollution and microplastics in sediments are a growing concern for marine ecosystems worldwide.We examined the vertical distribution and properties of microplastics in beach sediments of Xuwen Coral Reef National Nature Reserve,in Leizhou Peninsula,Zhanjiang,China.Sediment samples were taken in seven locations at 5-cm intervals from the surface to a depth of 30 cm.The vertical distribution of microplastic particles ranged from 0 to 1340 particles per kg on average of 119.05particles per kg.The most prevalent material was fibers(76%),followed by film(12%),fragments(11.2%),and foam(0.8%).The microplastics in size of 1-2 mm constituted the largest percentage(40%)of the total,followed by those in size of<1 mm(26.4%),2-3 mm(21.2%),3-4 mm(9.6%),and 4-5 mm(2.81%).Site S1 observed maximum sizes between 1 and 2 mm,S2 reported higher availability of microplastics with sizes ranging from 0.3 to 1 mm.Six different types of polymers were identified in the investigation,and mostly were polyethylene(PE)and polypropylene(PP).In general,the observation of microplastics in deeper sediments indicates that they have the ability to last for prolonged periods in the marine environment,which may present long-term hazards to benthic creatures.In conclusion,the discovery of microplastics in deep layers of coastal sediments highlights the necessity of minimizing plastic waste and enhancing management strategies to safeguard marine environments.展开更多
Predicting the productivity of multistage fractured horizontal wells plays an important role in exploiting unconventional resources.In recent years,machine learning(ML)models have emerged as a new approach for such st...Predicting the productivity of multistage fractured horizontal wells plays an important role in exploiting unconventional resources.In recent years,machine learning(ML)models have emerged as a new approach for such studies.However,the scarcity of sufficient real data for model training often leads to imprecise predictions,even though the models trained with real data better characterize geological and engineering features.To tackle this issue,we propose an ML model that can obtain reliable results even with a small amount of data samples.Our model integrates the synthetic minority oversampling technique(SMOTE)to expand the data volume,the support vector machine(SVM)for model training,and the particle swarm optimization(PSO)algorithm for optimizing hyperparameters.To enhance the model performance,we conduct feature fusion and dimensionality reduction.Additionally,we examine the influences of different sample sizes and ML models for training.The proposed model demonstrates higher prediction accuracy and generalization ability,achieving a predicted R^(2)value of up to 0.9 for the test set,compared to the traditional ML techniques with an R^(2)of 0.13.This model accurately predicts the production of fractured horizontal wells even with limited samples,supplying an efficient tool for optimizing the production of unconventional resources.Importantly,the model holds the potential applicability to address similar challenges in other fields constrained by scarce data samples.展开更多
Using observations and models from phase 6 of the Coupled Model Intercomparison Project(CMIP6),this study analyzes the performance of CMIP6 models in simulating the vertical structure of the Quasi-Biennial Oscillation...Using observations and models from phase 6 of the Coupled Model Intercomparison Project(CMIP6),this study analyzes the performance of CMIP6 models in simulating the vertical structure of the Quasi-Biennial Oscillation(QBO)and its impacts on eastern China surface air temperature(SAT),with empirical orthogonal function(EOF)analysis.The first leading mode(EOF1)of the QBO leads to an overall cooling/warming over eastern China via the QBO’s subtropical path and Holton-Tan effect,while the second leading mode(EOF2)of the QBO tends to cause an east-west dipole of SAT anomalies between eastern and western China due to a strong Holton-Tan effect.Most models with a self-generated QBO can capture both westerly and easterly QBO anomalies in the mid-lower stratosphere in EOF1 and only westerly anomalies in EOF2.The multi-model ensemble mean can reproduce the eastern China SAT anomalies that are statistically significant and related to EOF1-like QBO events.However,the intensity of these anomalies is relatively weaker,attributable to the weak Pacific response to the subtropical effect of the QBO.In contrast,most models fail to induce a strong Holton-Tan effect and a Northern Annular Mode pattern in the polar region during the EOF2-like QBO events,resulting in weak and insignificant eastern China SAT anomalies on average.Overall,the models with a better representation of polar and Pacific responses to the QBO’s vertical structure exhibit a more reasonable eastern China SAT response,although such a response is weaker than observed.展开更多
Horizontal wells play a crucial role in enhancing shale gas reservoir production.This study employs transient multiphase simulation to investigate the impact of well trajectory on production optimization throughout a ...Horizontal wells play a crucial role in enhancing shale gas reservoir production.This study employs transient multiphase simulation to investigate the impact of well trajectory on production optimization throughout a well’s life cycle.The research uses OLGATM as a simulator to examine six well trajectories:toe-up,toe-down,smooth horizontal,undulated toe-up,undulated toe-down,and undulated horizontal.Initial findings indicate comparable production rates across different trajectories during the early production phase,with toe-up wells showing slightly better performances due to minimal slugging.However,as the reservoir pressure decreases,the well trajectory significantly influences production.Horizontal wells achieve the highest accumulated gas production rates due to minimal liquid holdup and back pressure.Toe-up wells experience early liquid accumulation and severe slugging,leading to increased back pressure and smaller production.The study highlights the positive effects of lateral undulations on toe-up and toe-down wells in terms of liquid unloading,however some emphasis is also put on their adverse influence on horizontal wells.展开更多
In this study,the power generation difference between the east-west and the north-south orientation of the vertically installed heterojunction solar cell(HJT)modules was deeply discussed.East-west oriented HJT module ...In this study,the power generation difference between the east-west and the north-south orientation of the vertically installed heterojunction solar cell(HJT)modules was deeply discussed.East-west oriented HJT module has 30%higher power generation,especially in desert photovoltaic(PV)with a bimodal distribution.While the south-north one has a single peak,the same as normal PV modules.Vertical power generation technology of HJT also has less land occupation,which is of great significance for optimizing the design of photovoltaic systems.展开更多
Cadmium telluride(CdTe),which has a high average atomic number and a unique band structure,is a leading material for room-temperature X/γ-ray detectors.Resistivity and mobility are the two most important properties o...Cadmium telluride(CdTe),which has a high average atomic number and a unique band structure,is a leading material for room-temperature X/γ-ray detectors.Resistivity and mobility are the two most important properties of detector-grade CdTe single crystals.However,despite decades of research,the fabrication of high-resistivity and high-mobility CdTe single crystals faces persistent challenges,primarily because the stoichiometric composition cannot be well controlled owing to the high volatility of Cd under high-temperature conditions.This volatility introduces Te inclusions and cadmium vacancies(V_(Cd))into the as-grown CdTe ingot,which significantly degrades the device performance.In this study,we successfully obtained detector-grade CdTe single crystals by simultaneously employing a Cd reservoir and chlorine(Cl)dopants via a vertical gradient freeze(VGF)method.By installing a Cd reservoir,we can maintain the Cd pressure under the crystal growth conditions,thereby preventing the accumulation of Te in the CdTe ingot.Additionally,the existence of the Cl dopant helps improve the CdTe resistivity by minimizing V_(Cd)density through the formation of an acceptor complex(Cl_(Te)-V_(Cd))^(-1).The crystalline quality of the obtained CdTe(Cl)was evidenced by a reduction in large Te inclusions,high optical transmission(60%),and a sharp absorption edge(1.456 eV).The presence of substitutional Cl dopants,known as Cl_(Te)^(+),simultaneously supports the record high resistivity of 1.5×10^(10)Ω·cm and remarkable electron mobility of 1075±88 cm^(2)V^(-1)s^(-1)simultaneously,has been confirmed by photoluminescence spectroscopy.Moreover,using our crystals,we fabricated a planar detector withμτ_(e)of(1.11±0.04)×10^(-4)cm^(2)∕V,which performed with a decent radiation-detection feature.This study demonstrates that the vapor-pressure-controlled VGF method is a viable technical route for fabricating detector-grade CdTe crystals.展开更多
基金supported by the National Key R&D Program of China (Grant No.2022YFF0503700)the special funds of Hubei Luojia Laboratory (Grant No.220100011)+1 种基金supported by the International Space Science Institute–Beijing(ISSI-BJ) project“The Electromagnetic Data Validation and Scientific Application Research based on CSES Satellite”and ISSI/ISSI-BJ project,“Multi-Scale Magnetosphere–Ionosphere–Thermosphere Interaction.”
文摘The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospheric winds.In this study,we used the red-line measurements of MIGHTI to compare with the results estimated by Horizontal Wind Model 14(HWM14).The data selected included both the geomagnetic quiet period(December 2019 to August 2022)and the geomagnetic storm on August 26-28,2021.During the geomagnetic quiet period,the estimations of neutral winds from HWM14 showed relatively good agreement with the observations from ICON.According to the ICON observations,near the equator,zonal winds reverse from westward to eastward at around 06:00 local time(LT)at higher altitudes,and the stronger westward winds appear at later LTs at lower altitudes.At around 16:00 LT,eastward winds at 300 km reverse to westward,and vertical gradients of zonal winds similar to those at sunrise hours can be observed.In the middle latitudes,zonal winds reverse about 2-4 h earlier.Meridional winds vary more significantly than zonal winds with seasonal and latitudinal variations.According to the ICON observations,in the northern low latitudes,vertical reversals of meridional winds are found at 08:00-13:00 LT from 300 to 160 km and at around 18:00 LT from 300 to 200 km during the June solstice.Similar reversals of meridional winds are found at 04:00-07:00 LT from 300 to 160 km and at 22:00-02:00 LT from 270 to 200 km during the December solstice.In the southern low latitudes,meridional wind reversals occur at 08:00-11:00 LT from 200 to 160 km and at 21:00-02:00 LT from 300 to 200 km during the June solstice.During the December solstice,reversals of the meridional wind appear at 20:00-01:00 LT below 200 km and at 06:00-11:00 LT from 300 to 160 km.In the northern middle latitudes,the northward winds are dominant at 08:00-14:00 LT at 230 km during the June solstice.Northward winds persist until 16:00 LT at 160 and 300 km.During the December solstice,the northward winds are dominant from 06:00 to 21:00 LT.The vertical variations in neutral winds during the geomagnetic storm on August 26-28 were analyzed in detail.Both meridional and zonal winds during the active geomagnetic period observed by ICON show distinguishable vertical shear structures at different stages of the storm.On the dayside,during the main phase,the peak velocities of westward winds extend from a higher altitude to a lower altitude,whereas during the recovery phase,the peak velocities of the westward winds extend from lower altitudes to higher altitudes.The velocities of the southward winds are stronger at lower altitudes during the storm.These vertical structures of horizontal winds during the storm could not be reproduced by the HWM14 wind estimations,and the overall response to the storm of the horizontal winds in the low and middle latitudes is underestimated by HWM14.The ICON observations provide a good dataset for improving the HWM wind estimations in the middle and upper atmosphere,especially the vertical variations.
基金supported by National Key Research and Development Program of China,China(2024YFD1800102,2022YFD1800105 and 2022YFD1801500)National Natural Science Foundation of China,China(32372993 and 32030107)Fundamental Research Funds for the Central Universities,China(2662023PY005).
文摘Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Currently,there is no commercial vaccine or specific treatment available to prevent ZIKV infection.Therefore,controlling the epidemic's spread relies on preventing mosquitoes from transmitting the virus.Although various studies have explored the transmission of ZIKV between mosquitoes and vertebrate hosts,comprehensive research on potential mosquito-to-mosquito transmission of ZIKV remains limited.In this study,we conducted systematic laboratory investigations to assess the ability of ZIKV to spread among mosquitoes,and to evaluate the impact of ZIKV infection on mosquito development.Our findings revealed that ZIKV can be transmitted between Aedes aegypti mosquitoes both vertically and horizontally,through oviposition and contact between mosquitoes of the same or opposite sex.Additionally,we observed that ZIKV infection resulted in a reduction in the number of mosquito eggs but an increase in their size.The widespread distribution of ZIKV in infected mosquitoes and the altered levels of hormone related genes following viral infection were noted,which may contribute to viral transmission among mosquitoes and affect mosquito development.This research provides systematic experimental evidence of ZIKV transmission among mosquitoes,which is crucial for developing novel strategies to disrupt the spread of orthoflaviviruses and other mosquitoborne pathogens.
基金supported by the National Natural Science Foundation of China(No.32471608)the Open Project of Key Laboratory of Environmental Biotechnology,CAS(No.kf2020002)Yunnan Collaborative Innovation Center for Plateau Lake Ecology and Environmental Health.
文摘Elucidating the mechanisms underlying community assembly remains a central question in community ecology,especially in aquatic ecosystems disrupted by human activities.Understanding the causes and consequences of community responses to changing environment is essential for revealing the ecological effects of anthropogenic disturbances and proposing practical strategies for ecological restoration.While stochastic dispersal and species sorting are known to influence local biological communities,most studies have focused on horizontal dispersal,often neglecting the vertical exchange of organisms between planktonic and sedimentary communities when studying stochastic dispersal.We used a highly disturbed urban river in Beijing as a model system to investigate the relative roles of stochastic dispersal versus species sorting driven by local pollution,as well as two components of stochastic dispersal,vertical exchange and horizontal dispersal,in structuring local bacterial communities.Our integrated analyses of planktonic and sedimentary bacterial communities revealed that,despite different spatial patterns along the river,both types of bacterial communities were primarily shaped by stochastic dispersal processes rather than species sorting influenced by the environmental gradient.Notably,in addition to the effect of horizontal dispersal along the river,the vertical exchange between planktonic and sedimentary bacterial communities significantly contributed to the formation of local communities.These findings suggest that both vertical exchange and horizontal dispersal should be considered when assessing the role of stochastic dispersal in shaping local community structure in microbial communities.
文摘BACKGROUND Lateral window approach for sinus floor lift is commonly used for vertical bone augmentation in cases when the residual bone height is less than 5 mm.However,managing cases becomes more challenging when a maxillary sinus pseudocyst is present or when there is insufficient bone width.In this case,we utilized the bone window prepared during the lateral window sinus lift as a shell for horizontal bone augmentation.This allowed for simultaneous horizontal and vertical bone augmentation immediately after the removal of the maxillary sinus pseudocyst.CASE SUMMARY A 28-year-old female presented to our clinic with the chief complaint of missing upper left posterior teeth.Intraoral examination showed a horizontal deficiency of the alveolar ridge contour.The height of the alveolar bone was approximately 3.6 mm on cone beam computed tomography(CBCT).And a typical well-defined'dome-shaped'lesion in maxillary sinus was observed on CBCT imaging.The lateral bony window was prepared using a piezo-ultrasonic device,then the bony window was fixed to the buccal side of the 26 alveolar ridge using a titanium screw with a length of 10 mm and a diameter of 1.5 mm.The space between the bony window and the alveolar ridge was filled with Bio-Oss,covered with a Bio-Gide collagen membrane,and subsequently sutured.Nine months later,the patient’s bone width increased from 4.8 to 10.5 mm,and the bone height increased from 3.6 to 15.6 mm.Subsequently,a Straumann^(■)4.1 mm×10 mm implant was placed.The final all-ceramic crown restoration was completed four months later,and both clinical and radiographic examinations showed that the implant was successful,and the patient was satisfied with the results.CONCLUSION The bone block harvested from the lateral window sinus lift can be used for simultaneous horizontal bone augmentation acting as a shell for good two-dimensional bone augmentation.
基金supported by Systematic Major Project of Shuohuang Railway Development Co.,Ltd.,National Energy Group(Grant Number:SHTL-23-31)Beijing Natural Science Foundation(U22B2027).
文摘In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data silos.Vertical Federated Learning(VFL)has emerged as a promising approach to facilitate such collaboration,allowing diverse entities to collectively enhance machine learning models without the need to share sensitive training data.However,existing works have highlighted VFL’s susceptibility to privacy inference attacks,where an honest but curious server could potentially reconstruct a client’s raw data from embeddings uploaded by the client.This vulnerability poses a significant threat to VFL-based intelligent railway transportation systems.In this paper,we introduce SensFL,a novel privacy-enhancing method to against privacy inference attacks in VFL.Specifically,SensFL integrates regularization of the sensitivity of embeddings to the original data into the model training process,effectively limiting the information contained in shared embeddings.By reducing the sensitivity of embeddings to the original data,SensFL can effectively resist reverse privacy attacks and prevent the reconstruction of the original data from the embeddings.Extensive experiments were conducted on four distinct datasets and three different models to demonstrate the efficacy of SensFL.Experiment results show that SensFL can effectively mitigate privacy inference attacks while maintaining the accuracy of the primary learning task.These results underscore SensFL’s potential to advance privacy protection technologies within VFL-based intelligent railway systems,addressing critical security concerns in collaborative learning environments.
文摘To improve the vertical axis wind turbine(VAWT)design,the angle of attack(AOA)and airfoil data must be treated correctly.The present paper develops a method for determining AOA on a VAWT based on computational fluid dynamics(CFD)analysis.First,a CFD analysis of a two-bladed VAWT equipped with a NACA 0012 airfoil is conducted.The thrust and power coefficients are validated through experiments.Second,the blade force and velocity data at monitoring points are collected.The AOA at different azimuth angles is determined by removing the blade self-induction at the monitoring point.Then,the lift and drag coefficients as a function of AOA are extracted.Results show that this method is independent of the monitoring points selection located at certain distance to the blades and the extracted dynamic stall hysteresis is more precise than the one with the“usual”method without considering the self-induction from bound vortices.
基金supported by the National Natural Science Foundation of China(42304018)the National Natural Science Foundation of China(42330105,42064002,42074035)+3 种基金the Guangxi Natural Science Foundation of China(Guike AD23026177,2020GXNSFBA297145)the Foundation of Guilin University of Technology(GUTQDJJ6616032)Guangxi Key Laboratory of Spatial Information and Geomatics(21238-21-05)the Innovation Project of Guangxi Graduate Education(YCSW2023341)。
文摘The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmospheric pressure,which is primarily variable in the vertical direction.Current atmospheric pressure is either site-specific or has limited spatial coverage,necessitating vertical corrections for broader applicability.This study introduces a model that uses a Gaussian function for the vertical correction of atmospheric pressure when in situ meteorological observations are unavailable.Validation with the fifth-generation European Centre for Medium-Range Weather Forecasts reanalysis(ERA5)reveals an average Bias and RMS for the new model of 0.31 h Pa and 2.96 h Pa,respectively.This corresponds to improvements of 37.5%and 80.3%in terms of RMS compared to two commonly used models(T0and Tvmodels)that require in situ meteorological observations,respectively.Additional validation with radiosonde data shows an average Bias and RMS of 1.85 h Pa and 4.87 h Pa,corresponding to the improvement of 42.8%and 71.1%in RMS compared with T0and Tv models,respectively.These accuracies are sufficient for calculating ZHD to an accuracy of 1 mm by performing atmospheric pressure vertical correction.The new model can correct atmospheric pressure from meteorological stations or numerical weather forecasts to different heights of the troposphere.
基金financially supported by the National Natural Science Foundation of China(No.52204084)the Open Research Fund of the State Key Laboratory of Coal Resources and safe Mining,CUMT,China(No.SKLCRSM 23KF004)+3 种基金the Interdisciplinary Research Project for Young Teachers of USTB(Fundamental Research Funds for the Central Universities),China(No.FRF-IDRY-GD22-002)the Fundamental Research Funds for the Central Universities and the Youth Teacher International Exchange and Growth Program,China(No.QNXM20220009)the National Key R&D Program of China(Nos.2022YFC2905600 and 2022 YFC3004601)the Science,Technology&Innovation Project of Xiongan New Area,China(No.2023XAGG0061)。
文摘Understanding the mechanical properties of the lithologies is crucial to accurately determine the horizontal stress magnitude.To investigate the correlation between the rock mass properties and maximum horizontal stress,the three-dimensional(3D)stress tensors at 89 measuring points determined using an improved overcoring technique in nine mines in China were adopted,a newly defined characteristic parameter C_(ERP)was proposed as an indicator for evaluating the structural properties of rock masses,and a fuzzy relation matrix was established using the information distribution method.The results indicate that both the vertical stress and horizontal stress exhibit a good linear growth relationship with depth.There is no remarkable correlation between the elastic modulus,Poisson's ratio and depth,and the distribution of data points is scattered and messy.Moreover,there is no obvious relationship between the rock quality designation(RQD)and depth.The maximum horizontal stress σ_(H) is a function of rock properties,showing a certain linear relationship with the C_(ERP)at the same depth.In addition,the overall change trend of σ_(H) determined by the established fuzzy identification method is to increase with the increase of C_(ERP).The fuzzy identification method also demonstrates a relatively detailed local relationship betweenσ_H and C_(ERP),and the predicted curve rises in a fluctuating way,which is in accord well with the measured stress data.
基金supported by the National Key Research and Development Program of China(No.2022YFB3604500,No.2022YFB3604501)the National Natural Science Foundation of China(No.52172141)the Technology Development Project of Shanxi-Zheda Institude of Advanced Materials and Chemical Engineering(No.2022SX-TD017).
文摘van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type photodetectors are not compatible with large-areaarray fabrication and show unimpressive performance in self-powered mode.Herein,vertical 1D GaN nanorods arrays(NRAs)/2D MoS_(2)/PEDOT:PSS in wafer scale have been proposed for self-powered flexible photodetectors arrays firstly.The as-integrated device without external bias under weak UV illumination exhibits a competitive responsivity of 1.47 A W^(−1)and a high detectivity of 1.2×10^(11)Jones,as well as a fast response speed of 54/71μs,thanks to the strong light absorption of GaN NRAs and the efficient photogenerated carrier separation in type-II heterojunction.Notably,the strain-tunable photodetection performances of device have been demonstrated.Impressively,the device at−0.78%strain and zero bias reveals a significantly enhanced photoresponse with a responsivity of 2.47 A W^(−1),a detectivity of 2.6×10^(11)Jones,and response times of 40/45μs,which are superior to the state-of-the-art self-powered flexible photodetectors.This work presents a valuable avenue to prepare tunable vdWs heterostructures for self-powered flexible photodetection,which performs well in flexible sensors.
文摘The China Spallation Neutron Source(CSNS)is the fourth pulsed accelerator-driven neutron source in the world,and it achieved its design target of 100 kW in 2020.The planned China Spallation Neutron Source Phase II(CSNS-II)commenced in 2024.The CSNS-II linac design primarily involves the addition of a radio-frequency ion source and a section of a superconducting linear accelerator composed of two types of superconducting cavities,namely double-spoke and six-cell elliptical cavities,after the drift tube linac(DTL).The development of the double-spoke superconducting cavity began in early 2021,and by January 2023,the welding,post-processing,and vertical tests of two 324 MHz double-spoke cavity prototypes were completed,with vertical test gradients of 11.6 and 15 MV/m,and Q_(0)≥3×10^(10)@E_(acc)≤10 MV/m.The R&D of the cryomodule began in January 2022.In October 2023,the clean assembly of the double-spoke cavity string and cold mass installation of the cryomodule commenced,with the installation of the cryomodule and valve box completing in two months.In January 2024,a horizontal test of the cryomodule was completed,making it the first double-spoke cavity cryomodule in China.The test results showed that the maximum gradients of the two superconducting cavities at a pulse width of 4 ms and repetition frequency of 25 Hz were 12.8 and 15.2 MV/m,respectively.This article provides a detailed introduction to the double-spoke superconducting cavity,tuner,coupler,and cryomodule,elaborates on the clean assembly of the cavity string and cold mass installation of the cryomodule,and provides a detailed analysis of the horizontal test results.
文摘This article presents four techniques for assessing verticality:the plumb line approach,the total station distance technique,the three-point centering method,and the centroid method.Given the significant error associated with the total station horizontal distance technique when measuring circular piers,this paper proposes the centroid method.This method calculates verticality by determining the coordinates of the center points at both ends of the pier.Experimental findings indicate that the centroid method achieves accuracy in measuring the verticality of circular piers comparable to the three-point centering method,while offering a faster inspection process.Furthermore,the paper explores the concept of composite verticality and validates the effectiveness of the centroid method in measuring composite verticality and its practical applications through comparative experiments.
基金Supported by the National Key Research and Development Program(2023YFC3107602)。
文摘Airborne area-array whisk-broom imaging systems typically adopt constant-speed scanning schemes.For large-inertia scanning systems,constant-speed scanning requires substantial time to complete the reversal motion,reducing the system's adaptability to high-speed reversal scanning and decreasing scanning efficiency.This study proposes a novel sinusoidal variable-speed roll scanning strategy,which reduces abrupt changes in speed and acceleration,minimizing time loss during reversals.Based on the forward image motion compensation strategy in the pitch direction,we establish a line-of-sight(LOS)position calculation model with vertical flight path correction(VFPC),ensuring that the central LOS of the scanned image remains stable on the same horizontal line,facilitating accurate image stitching in whisk-broom imaging.Through theoretical analysis and simulation experiments,the proposed method improves the scanning efficiency by approximately 18.6%at a 90o whiskbroom imaging angle under the same speed height ratio conditions.The new VFPC method enables wide-field,high-resolution imaging,achieving single-line LOS horizontal stability with an accuracy of better than O.4 mrad.The research is of great significance to promote the further development of airborne area-array whisk-broom imaging technology toward wider fields of view,higher speed height ratios,and greater scanning efficiency.
基金supported by Jiangsu Agriculture Science and Technology Innovation Fund(No.CX(22)3001)。
文摘The escalating global dissemination of plasmid-mediated antibiotic resistance poses a formidable threat to global health.Conjugation stands as a pivotal mechanism for horizontal gene transfer among bacterial populations,facilitating the spread of antibiotic resistance genes(ARGs).Microelectrolysis has garnered attention as an efficacious strategy for mitigating antibiotic concentrations in wastewater,yet its potential impact on ARG horizontal transfer remain largely unexplored.This comprehensive investigation unveils that microelectrolysis not only influences but significantly accelerates the conjugative transfer of ARG-harboring plasmids.Remarkably,this phenomenon is corroborated at the microbial community scale,underscoring its ecological relevance.Alarmingly,the study highlights the vulnerability of intestinalmicroorganisms to acquire antibiotic resistance under electrolytic stimulation,posing heightened risks to both animal and human health.Delving deeper,the study elucidates the underlyingmechanisms responsible for this enhanced conjugative transfer.It reveals that microelectrolysis augments the abundance of mating-competent cells,triggers the generation of reactive oxygen species,inflicts modest membrane damage,and upregulates the expression of genes critical for conjugation.These findings collectively contribute to a more profound comprehension of the environmental dissemination dynamics and associated public health implications of ARGs in the context of wastewater treatment employing microelectrolytic technologies.
基金supported by the National Natural Science Foundation of China(Grant No.U2142201)the Fengyun Application Pion eering Project(Grant No.FY-APP-ZX-2022.01)。
文摘Measurements from a hyperspectral infrared(HIR) sounder onboard a satellite in geostationary orbit not only provide atmospheric thermodynamic information,but also can be used to infer dynamic information with high temporal resolution.Radiance measurements from the Geostationary Interferometric Infrared Sounder(GIIRS),obtained with 15-min temporal resolution during Typhoon Maria(2018) and 30-min temporal resolution during Typhoon Lekima(2019),were used to derive three-dimensional(3D) horizontal winds by tracking the motion of atmospheric moisture.This work focused on the impact of assimilation of 3D winds on typhoon analyses and forecasts using the operational NWP model of the China Meteorological Administration(CMA-MESO),and improved understanding of the potential benefits of assimilating dynamic information from geostationary sounder data with higher temporal resolution.The standard deviation of the observations minus simulations revealed that the accuracy of the derived 3D winds with 15-min resolution was higher than that of derived winds with 30-min resolution.Experiments showed that the assimilation system can effectively absorb the information of the derived 3D winds,and that dynamic information from clear-sky areas can be transferred to typhoon areas.In typhoon prediction,assimilation of the derived 3D winds had greatest influence on the typhoon track,and less influence on the maximum wind speed.Assimilation of the derived 3D winds reduced the average track error by 17.4% for Typhoon Maria(2018) and by 3.5% for Typhoon Lekima(2019) during their entire 36-h forecasts initiated at different times.Assimilation of GIIRS dynamic information can substantially improve forecasts of heavy precipitation by CMAMESO.Results indicate that the assimilation of dynamic information from high-temporal-resolution geostationary HIR sounder data adds value for improved numerical weather prediction.
基金Supported by the Southern Marine Science and Engineering Guangdong Laboratory、Zhanjiang(No.ZJW-2019-08)APN、CRRP2019-09MYOnodera、Shinichi Onodera、and the SCS Scholar Grant(No.002029002008/2019)。
文摘Plastic pollution and microplastics in sediments are a growing concern for marine ecosystems worldwide.We examined the vertical distribution and properties of microplastics in beach sediments of Xuwen Coral Reef National Nature Reserve,in Leizhou Peninsula,Zhanjiang,China.Sediment samples were taken in seven locations at 5-cm intervals from the surface to a depth of 30 cm.The vertical distribution of microplastic particles ranged from 0 to 1340 particles per kg on average of 119.05particles per kg.The most prevalent material was fibers(76%),followed by film(12%),fragments(11.2%),and foam(0.8%).The microplastics in size of 1-2 mm constituted the largest percentage(40%)of the total,followed by those in size of<1 mm(26.4%),2-3 mm(21.2%),3-4 mm(9.6%),and 4-5 mm(2.81%).Site S1 observed maximum sizes between 1 and 2 mm,S2 reported higher availability of microplastics with sizes ranging from 0.3 to 1 mm.Six different types of polymers were identified in the investigation,and mostly were polyethylene(PE)and polypropylene(PP).In general,the observation of microplastics in deeper sediments indicates that they have the ability to last for prolonged periods in the marine environment,which may present long-term hazards to benthic creatures.In conclusion,the discovery of microplastics in deep layers of coastal sediments highlights the necessity of minimizing plastic waste and enhancing management strategies to safeguard marine environments.
基金supported by the National Natural Science Foundation of China(52274055)the Shandong Provincial Natural Science Foundation(ZR2022YQ50)the Taishan Scholar Program of Shandong Province(tsqn202408088)。
文摘Predicting the productivity of multistage fractured horizontal wells plays an important role in exploiting unconventional resources.In recent years,machine learning(ML)models have emerged as a new approach for such studies.However,the scarcity of sufficient real data for model training often leads to imprecise predictions,even though the models trained with real data better characterize geological and engineering features.To tackle this issue,we propose an ML model that can obtain reliable results even with a small amount of data samples.Our model integrates the synthetic minority oversampling technique(SMOTE)to expand the data volume,the support vector machine(SVM)for model training,and the particle swarm optimization(PSO)algorithm for optimizing hyperparameters.To enhance the model performance,we conduct feature fusion and dimensionality reduction.Additionally,we examine the influences of different sample sizes and ML models for training.The proposed model demonstrates higher prediction accuracy and generalization ability,achieving a predicted R^(2)value of up to 0.9 for the test set,compared to the traditional ML techniques with an R^(2)of 0.13.This model accurately predicts the production of fractured horizontal wells even with limited samples,supplying an efficient tool for optimizing the production of unconventional resources.Importantly,the model holds the potential applicability to address similar challenges in other fields constrained by scarce data samples.
基金supported by the National Natural Science Foundation of China(Grant Nos.42120104001,42192563 and 42005010)the Shanghai Sailing Program(Grant No.23YF1401400).
文摘Using observations and models from phase 6 of the Coupled Model Intercomparison Project(CMIP6),this study analyzes the performance of CMIP6 models in simulating the vertical structure of the Quasi-Biennial Oscillation(QBO)and its impacts on eastern China surface air temperature(SAT),with empirical orthogonal function(EOF)analysis.The first leading mode(EOF1)of the QBO leads to an overall cooling/warming over eastern China via the QBO’s subtropical path and Holton-Tan effect,while the second leading mode(EOF2)of the QBO tends to cause an east-west dipole of SAT anomalies between eastern and western China due to a strong Holton-Tan effect.Most models with a self-generated QBO can capture both westerly and easterly QBO anomalies in the mid-lower stratosphere in EOF1 and only westerly anomalies in EOF2.The multi-model ensemble mean can reproduce the eastern China SAT anomalies that are statistically significant and related to EOF1-like QBO events.However,the intensity of these anomalies is relatively weaker,attributable to the weak Pacific response to the subtropical effect of the QBO.In contrast,most models fail to induce a strong Holton-Tan effect and a Northern Annular Mode pattern in the polar region during the EOF2-like QBO events,resulting in weak and insignificant eastern China SAT anomalies on average.Overall,the models with a better representation of polar and Pacific responses to the QBO’s vertical structure exhibit a more reasonable eastern China SAT response,although such a response is weaker than observed.
基金supported by a postdoctoral project from PetroChina Southwest Oil and Gas Field Company,titled“Research on Flow Behavior of Horizontal Shale Gas Wellbore Based on Reservoir-Wellbore Coupling”(Project Number:2024D103-02-08).
文摘Horizontal wells play a crucial role in enhancing shale gas reservoir production.This study employs transient multiphase simulation to investigate the impact of well trajectory on production optimization throughout a well’s life cycle.The research uses OLGATM as a simulator to examine six well trajectories:toe-up,toe-down,smooth horizontal,undulated toe-up,undulated toe-down,and undulated horizontal.Initial findings indicate comparable production rates across different trajectories during the early production phase,with toe-up wells showing slightly better performances due to minimal slugging.However,as the reservoir pressure decreases,the well trajectory significantly influences production.Horizontal wells achieve the highest accumulated gas production rates due to minimal liquid holdup and back pressure.Toe-up wells experience early liquid accumulation and severe slugging,leading to increased back pressure and smaller production.The study highlights the positive effects of lateral undulations on toe-up and toe-down wells in terms of liquid unloading,however some emphasis is also put on their adverse influence on horizontal wells.
文摘In this study,the power generation difference between the east-west and the north-south orientation of the vertically installed heterojunction solar cell(HJT)modules was deeply discussed.East-west oriented HJT module has 30%higher power generation,especially in desert photovoltaic(PV)with a bimodal distribution.While the south-north one has a single peak,the same as normal PV modules.Vertical power generation technology of HJT also has less land occupation,which is of great significance for optimizing the design of photovoltaic systems.
基金supported by the National Key R&D Program(Nos.2023YFE0108500 and 2023YFF0719500)the National Natural Science Foundation of China(Nos.52072300 and 52302199)+2 种基金the Guangdong Basic and Applied Basic Research Foundation(No.2022A1515110538)Key Research and Development Program of Shaanxi(No.2023-GHZD-48)the Fundamental Research Funds for the Central Universities.
文摘Cadmium telluride(CdTe),which has a high average atomic number and a unique band structure,is a leading material for room-temperature X/γ-ray detectors.Resistivity and mobility are the two most important properties of detector-grade CdTe single crystals.However,despite decades of research,the fabrication of high-resistivity and high-mobility CdTe single crystals faces persistent challenges,primarily because the stoichiometric composition cannot be well controlled owing to the high volatility of Cd under high-temperature conditions.This volatility introduces Te inclusions and cadmium vacancies(V_(Cd))into the as-grown CdTe ingot,which significantly degrades the device performance.In this study,we successfully obtained detector-grade CdTe single crystals by simultaneously employing a Cd reservoir and chlorine(Cl)dopants via a vertical gradient freeze(VGF)method.By installing a Cd reservoir,we can maintain the Cd pressure under the crystal growth conditions,thereby preventing the accumulation of Te in the CdTe ingot.Additionally,the existence of the Cl dopant helps improve the CdTe resistivity by minimizing V_(Cd)density through the formation of an acceptor complex(Cl_(Te)-V_(Cd))^(-1).The crystalline quality of the obtained CdTe(Cl)was evidenced by a reduction in large Te inclusions,high optical transmission(60%),and a sharp absorption edge(1.456 eV).The presence of substitutional Cl dopants,known as Cl_(Te)^(+),simultaneously supports the record high resistivity of 1.5×10^(10)Ω·cm and remarkable electron mobility of 1075±88 cm^(2)V^(-1)s^(-1)simultaneously,has been confirmed by photoluminescence spectroscopy.Moreover,using our crystals,we fabricated a planar detector withμτ_(e)of(1.11±0.04)×10^(-4)cm^(2)∕V,which performed with a decent radiation-detection feature.This study demonstrates that the vapor-pressure-controlled VGF method is a viable technical route for fabricating detector-grade CdTe crystals.
