Optimizing plant architecture for specific cultivation methods is essential for enhancing fruit productivity.Unlike indeterminate growth plants,the total productivity of determinate growth plants relies on cumulative ...Optimizing plant architecture for specific cultivation methods is essential for enhancing fruit productivity.Unlike indeterminate growth plants,the total productivity of determinate growth plants relies on cumulative fruit production and synchronized fruit ripening from both main and axillary shoots.Here,we focused on SlD14and SlMAX1,two key genes involved in the regulation of strigolactone(SL)signaling and biosynthesis,with the goal of maximizing yield and syn chronizing fruit ripening by fine-tuning axillary shoot growth.Using clustered regularly interspaced short palindromic repeats(CRISPR)/CRISPR-associated protein 9(Cas9)technology,we found that the sld14,slmax1,and sld14 slmax1mutant plants exhibited reduced plant height and increased axillary shoot proliferation compared to wild-type plants.However,these mutants showed reduced yield and delayed ripening,likely due to a source-sink imbalance caused by excessive axillary shoot development.A weak sld14 allele displayed a milder phenotype,maintaining total fruit yield and harvest index despite smaller individual fruit size.These findings indicate that allelic variation in SL-related genes can influence plant architecture and yield components.Our results suggest that weak or partial alleles may serve as promising targets for tailoring tomato architecture to space-limited cultivation systems.展开更多
This study investigates the width of the secondary eyewall(SE)immediately following its formation in tropical cyclones with surface environmental winds aligned and counter-aligned with environmental vertical wind shea...This study investigates the width of the secondary eyewall(SE)immediately following its formation in tropical cyclones with surface environmental winds aligned and counter-aligned with environmental vertical wind shear(VWS),using idealized numerical experiments.Results reveal that the SE develops greater radial extent when surface winds align with VWS compared to counter-aligned conditions.In alignment configurations,shear-enhanced surface winds on the right flank amplify surface enthalpy fluxes,thereby elevating boundary-layer entropy within the downshear outer-core region.Subsequently,more vigorous outer rainbands develop,inducing marked acceleration of tangential winds in the outer core preceding SE formation.The resultant radial expansion of supergradient winds near the boundary-layer top triggers widespread convective activity immediately beyond the inner core.Progressive axisymmetrization of this convective forcing ultimately generates an expansive SE structure.展开更多
This study investigates the relationship between atmospheric stratification (i.e., static stability given by N^(2)) and the vertical energy transfer of stationary planetary waves, and further illustrates the underlyin...This study investigates the relationship between atmospheric stratification (i.e., static stability given by N^(2)) and the vertical energy transfer of stationary planetary waves, and further illustrates the underlying physical mechanism. Specifically, for the simplified case of constant stratospheric N^(2), the refractive index square of planetary waves has a theoretical tendency to increase first and then decrease with an increased N^(2), whereas the group velocity weakens. Mechanistically, this behavior can be understood as an intensified suppression of vertical isentropic surface displacement caused by meridional heat transport of planetary waves under strong N^(2) conditions. Observational analysis corroborates this finding, demonstrating a reduction in the vertical-propagation velocity of waves with increased N^(2). A linear, quasi- geostrophic, mid-latitude beta-plane model with a constant background westerly wind and a prescribed N^(2) applicable to the stratosphere is used to obtain analytic solutions. In this model, the planetary waves are initiated by steady energy influx from the lower boundary. The analysis indicates that under strong N^(2) conditions, the amplitude of planetary waves can be sufficiently increased by the effective energy convergence due to the slowing vertical energy transfer, resulting in a streamfunction response in this model that contains more energy. For N^(2) with a quasi-linear vertical variation, the results bear a resemblance to the constant case, except that the wave amplitude and oscillating frequency show some vertical variations.展开更多
The vertical heterogeneity of the pore structure in deep coal seams with varying ash yields is a key control for coalbed methane storage and producibility;however,its specific impact on gas adsorption is not clearly d...The vertical heterogeneity of the pore structure in deep coal seams with varying ash yields is a key control for coalbed methane storage and producibility;however,its specific impact on gas adsorption is not clearly defined.The focus of this study is the No.8 coal seam of the Carboniferous Benxi Formation in the Central-Eastern Ordos Basin.By integrating microscopic identification,proximate analysis,gas adsorption(CO_(2),N_(2),and CH_(4)),and the multifractal theory,we quantitatively characterized the nanopore structure(micropores<2 nm and mesopores 2 nm-100 nm)of coal reservoirs with varying ash yields.The results indicate that(1)ash yield is the primary factor that controls the vertical evolution of pore structures in coal seams.In low-ash yield coal seams,the extent of thermal evolution and ash yield jointly constrain the heterogeneity of pore size distribution.In mediumto high-ash yield coal seams,the heterogeneity of pore structure and pore size distribution are predominantly constrained by ash yield.(2)As the ash yield vertically increases,the mesoporous pore volume and specific surface area initially decrease and subsequently increase,while the contribution of micropores to both pore volume and specific surface area continuously diminishes.Consequently,the total pore volume and specific surface area of the coal samples exhibit a two-stage reduction close to an ash yield threshold of approximately 20%.(3)Further,the Langmuir volume for CH_(4)adsorption sharply declines below the 20%threshold,followed by a gradual decrease;in contrast,the Langmuir pressure initially decreases and subsequently increases.Hence,the vertical increase in ash yield constrains the development of pore systems and diminishes pore connectivity,thereby reducing methane adsorption capacity and adversely affecting coalbed methane productivity.(4)Low-ash yield coal reservoirs are characterized by a rapid gas breakthrough and high productivity,whereas medium-ash yield coal reservoirs generally require prolonged depressurization to achieve peak gas production.These findings reveal that in medium-high rank coal,ash yield―and not thermal evolution―is the main factor that controls vertical pore evolution and methane adsorption efficiency.The quantitative ash yield threshold(20%)established in this study provides a practical criterion for evaluating reservoir quality and predicting vertical variations in gas storage potential in the Ordos Basin.展开更多
Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we d...Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.展开更多
In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data silos.Vertical Federated Learning(VFL)has emerged as a promising approach...In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data silos.Vertical Federated Learning(VFL)has emerged as a promising approach to facilitate such collaboration,allowing diverse entities to collectively enhance machine learning models without the need to share sensitive training data.However,existing works have highlighted VFL’s susceptibility to privacy inference attacks,where an honest but curious server could potentially reconstruct a client’s raw data from embeddings uploaded by the client.This vulnerability poses a significant threat to VFL-based intelligent railway transportation systems.In this paper,we introduce SensFL,a novel privacy-enhancing method to against privacy inference attacks in VFL.Specifically,SensFL integrates regularization of the sensitivity of embeddings to the original data into the model training process,effectively limiting the information contained in shared embeddings.By reducing the sensitivity of embeddings to the original data,SensFL can effectively resist reverse privacy attacks and prevent the reconstruction of the original data from the embeddings.Extensive experiments were conducted on four distinct datasets and three different models to demonstrate the efficacy of SensFL.Experiment results show that SensFL can effectively mitigate privacy inference attacks while maintaining the accuracy of the primary learning task.These results underscore SensFL’s potential to advance privacy protection technologies within VFL-based intelligent railway systems,addressing critical security concerns in collaborative learning environments.展开更多
Determining earth pressure on jacked pipes is essential for ensuring lining safety and calculating jacking force,especially for deep-buried pipes.To better reflect the soil arching effect resulting from the excavation...Determining earth pressure on jacked pipes is essential for ensuring lining safety and calculating jacking force,especially for deep-buried pipes.To better reflect the soil arching effect resulting from the excavation of rectangular jacked pipes and the distribution of the earth pressure on jacked pipes,we present an analytical solution for predicting the vertical earth pressure on deep-buried rectangular pipe jacking tunnels,incorporating the tunnelling-induced ground loss distribution.Our proposed analytical model consists of the upper multi-layer parabolic soil arch and the lower friction arch.The key parameters(i.e.,width and height of friction arch B and height of parabolic soil arch H 1)are determined according to the existing research,and an analytical solution for K l is derived based on the distribution characteristics of the principal stress rotation angle.With consideration for the transition effect of the mechanical characteristics of the parabolic arch zone,an analytical solution for soil load transfer is derived.The prediction results of our analytical solution are compared with tests and simulation results to validate the effectiveness of the proposed analytical solution.Finally,the effects of different parameters on the soil pressure are discussed.展开更多
Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Cu...Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Currently,there is no commercial vaccine or specific treatment available to prevent ZIKV infection.Therefore,controlling the epidemic's spread relies on preventing mosquitoes from transmitting the virus.Although various studies have explored the transmission of ZIKV between mosquitoes and vertebrate hosts,comprehensive research on potential mosquito-to-mosquito transmission of ZIKV remains limited.In this study,we conducted systematic laboratory investigations to assess the ability of ZIKV to spread among mosquitoes,and to evaluate the impact of ZIKV infection on mosquito development.Our findings revealed that ZIKV can be transmitted between Aedes aegypti mosquitoes both vertically and horizontally,through oviposition and contact between mosquitoes of the same or opposite sex.Additionally,we observed that ZIKV infection resulted in a reduction in the number of mosquito eggs but an increase in their size.The widespread distribution of ZIKV in infected mosquitoes and the altered levels of hormone related genes following viral infection were noted,which may contribute to viral transmission among mosquitoes and affect mosquito development.This research provides systematic experimental evidence of ZIKV transmission among mosquitoes,which is crucial for developing novel strategies to disrupt the spread of orthoflaviviruses and other mosquitoborne pathogens.展开更多
To improve the vertical axis wind turbine(VAWT)design,the angle of attack(AOA)and airfoil data must be treated correctly.The present paper develops a method for determining AOA on a VAWT based on computational fluid d...To improve the vertical axis wind turbine(VAWT)design,the angle of attack(AOA)and airfoil data must be treated correctly.The present paper develops a method for determining AOA on a VAWT based on computational fluid dynamics(CFD)analysis.First,a CFD analysis of a two-bladed VAWT equipped with a NACA 0012 airfoil is conducted.The thrust and power coefficients are validated through experiments.Second,the blade force and velocity data at monitoring points are collected.The AOA at different azimuth angles is determined by removing the blade self-induction at the monitoring point.Then,the lift and drag coefficients as a function of AOA are extracted.Results show that this method is independent of the monitoring points selection located at certain distance to the blades and the extracted dynamic stall hysteresis is more precise than the one with the“usual”method without considering the self-induction from bound vortices.展开更多
Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batterie...Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.展开更多
The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmosphe...The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmospheric pressure,which is primarily variable in the vertical direction.Current atmospheric pressure is either site-specific or has limited spatial coverage,necessitating vertical corrections for broader applicability.This study introduces a model that uses a Gaussian function for the vertical correction of atmospheric pressure when in situ meteorological observations are unavailable.Validation with the fifth-generation European Centre for Medium-Range Weather Forecasts reanalysis(ERA5)reveals an average Bias and RMS for the new model of 0.31 h Pa and 2.96 h Pa,respectively.This corresponds to improvements of 37.5%and 80.3%in terms of RMS compared to two commonly used models(T0and Tvmodels)that require in situ meteorological observations,respectively.Additional validation with radiosonde data shows an average Bias and RMS of 1.85 h Pa and 4.87 h Pa,corresponding to the improvement of 42.8%and 71.1%in RMS compared with T0and Tv models,respectively.These accuracies are sufficient for calculating ZHD to an accuracy of 1 mm by performing atmospheric pressure vertical correction.The new model can correct atmospheric pressure from meteorological stations or numerical weather forecasts to different heights of the troposphere.展开更多
van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type phot...van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type photodetectors are not compatible with large-areaarray fabrication and show unimpressive performance in self-powered mode.Herein,vertical 1D GaN nanorods arrays(NRAs)/2D MoS_(2)/PEDOT:PSS in wafer scale have been proposed for self-powered flexible photodetectors arrays firstly.The as-integrated device without external bias under weak UV illumination exhibits a competitive responsivity of 1.47 A W^(−1)and a high detectivity of 1.2×10^(11)Jones,as well as a fast response speed of 54/71μs,thanks to the strong light absorption of GaN NRAs and the efficient photogenerated carrier separation in type-II heterojunction.Notably,the strain-tunable photodetection performances of device have been demonstrated.Impressively,the device at−0.78%strain and zero bias reveals a significantly enhanced photoresponse with a responsivity of 2.47 A W^(−1),a detectivity of 2.6×10^(11)Jones,and response times of 40/45μs,which are superior to the state-of-the-art self-powered flexible photodetectors.This work presents a valuable avenue to prepare tunable vdWs heterostructures for self-powered flexible photodetection,which performs well in flexible sensors.展开更多
In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates t...In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates the vertical growth process of strike-slip faults through field outcrop observations in the Keping area,interpretation of seismic data from the Fuman Oilfield,Tarim Basim,NW China,and structural physical simulation experiments.The results are obtained mainly in four aspects.First,field outcrops and ultra-deep seismic profiles indicate a three-layer structure within the strike-slip fault,consisting of fault core,fracture zone and primary rock.The fault core can be classified into three parts vertically:fracture-cavity unit,fault clay and breccia zone.The distribution of fracture-cavity units demonstrates a distinct pattern of vertical stratification,owing to the structural characteristics and growth process of the slip-strike fault.Second,the ultra-deep seismic profiles show multiple fracture-cavity units in the strike-slip fault zone.These units can be classified into four types:top fractured,middle connected,deep terminated,and intra-layer fractured.Third,structural physical simulation experiments and ultra-deep seismic data interpretation reveal that the strike-slip faults have evolved vertically in three stages:segmental rupture,vertical growth,and connection and extension.The particle image velocimetry detection demonstrates that the initial fracture of the fault zone occurred at the top or bottom and then evolved into cavities gradually along with the fault growth,accompanied by the emergence of new fractures in the middle part of the strata,which subsequently connected with the deep and shallow cavities to form a complete fault zone.Fourth,the ultra-deep carbonate strata primarily develop three types of fractured-cavity reservoirs:flower-shaped fracture,large and deep fault and staggered overlap.The first two types are larger in size with better reservoir conditions,suggesting a significant exploration potential.展开更多
The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospher...The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospheric winds.In this study,we used the red-line measurements of MIGHTI to compare with the results estimated by Horizontal Wind Model 14(HWM14).The data selected included both the geomagnetic quiet period(December 2019 to August 2022)and the geomagnetic storm on August 26-28,2021.During the geomagnetic quiet period,the estimations of neutral winds from HWM14 showed relatively good agreement with the observations from ICON.According to the ICON observations,near the equator,zonal winds reverse from westward to eastward at around 06:00 local time(LT)at higher altitudes,and the stronger westward winds appear at later LTs at lower altitudes.At around 16:00 LT,eastward winds at 300 km reverse to westward,and vertical gradients of zonal winds similar to those at sunrise hours can be observed.In the middle latitudes,zonal winds reverse about 2-4 h earlier.Meridional winds vary more significantly than zonal winds with seasonal and latitudinal variations.According to the ICON observations,in the northern low latitudes,vertical reversals of meridional winds are found at 08:00-13:00 LT from 300 to 160 km and at around 18:00 LT from 300 to 200 km during the June solstice.Similar reversals of meridional winds are found at 04:00-07:00 LT from 300 to 160 km and at 22:00-02:00 LT from 270 to 200 km during the December solstice.In the southern low latitudes,meridional wind reversals occur at 08:00-11:00 LT from 200 to 160 km and at 21:00-02:00 LT from 300 to 200 km during the June solstice.During the December solstice,reversals of the meridional wind appear at 20:00-01:00 LT below 200 km and at 06:00-11:00 LT from 300 to 160 km.In the northern middle latitudes,the northward winds are dominant at 08:00-14:00 LT at 230 km during the June solstice.Northward winds persist until 16:00 LT at 160 and 300 km.During the December solstice,the northward winds are dominant from 06:00 to 21:00 LT.The vertical variations in neutral winds during the geomagnetic storm on August 26-28 were analyzed in detail.Both meridional and zonal winds during the active geomagnetic period observed by ICON show distinguishable vertical shear structures at different stages of the storm.On the dayside,during the main phase,the peak velocities of westward winds extend from a higher altitude to a lower altitude,whereas during the recovery phase,the peak velocities of the westward winds extend from lower altitudes to higher altitudes.The velocities of the southward winds are stronger at lower altitudes during the storm.These vertical structures of horizontal winds during the storm could not be reproduced by the HWM14 wind estimations,and the overall response to the storm of the horizontal winds in the low and middle latitudes is underestimated by HWM14.The ICON observations provide a good dataset for improving the HWM wind estimations in the middle and upper atmosphere,especially the vertical variations.展开更多
BACKGROUND Wound management is an essential part of emergency medicine practice.A good suture technique should deal a complex irregular traumatic wound without any complications of dehiscence/gaping,infection,delayed ...BACKGROUND Wound management is an essential part of emergency medicine practice.A good suture technique should deal a complex irregular traumatic wound without any complications of dehiscence/gaping,infection,delayed wound healing,frequent dressings and further stay in hospital.There is no ideal technique of suturing for any wound.In pursuit of the new techniques,we have introduced a new suturing technique called combined oblique and vertical everting running(COVER)stitch which has showed good healing with less complications.AIM To compare the outcomes between the COVER stitch and conventional suturing group.METHODS In this study,we included 40 cases which were divided into two groups.Group 1 patients were managed by COVER stitch,and group 2 patients underwent conventional suturing for their wounds.The outcomes were measured in terms of scar quality,suturing duration and length of suture material used,suturing related complications and suture removal time which were compared by t-test usingχ^(2) test.RESULTS Better results were seen in COVER stitch than the conventional suturing.COVER group had significantly better results in terms of time taken for suture,amount suture material used and time taken for suture removal compared to the conventional group.No wound related complications were seen in this group.Moreover,scar formed was also better in COVER group.CONCLUSION COVER stitch is another new technique which can be used to deal simple to complex wounds and it is an emerging idea with good healthy scars with less complications.展开更多
This article presents four techniques for assessing verticality:the plumb line approach,the total station distance technique,the three-point centering method,and the centroid method.Given the significant error associa...This article presents four techniques for assessing verticality:the plumb line approach,the total station distance technique,the three-point centering method,and the centroid method.Given the significant error associated with the total station horizontal distance technique when measuring circular piers,this paper proposes the centroid method.This method calculates verticality by determining the coordinates of the center points at both ends of the pier.Experimental findings indicate that the centroid method achieves accuracy in measuring the verticality of circular piers comparable to the three-point centering method,while offering a faster inspection process.Furthermore,the paper explores the concept of composite verticality and validates the effectiveness of the centroid method in measuring composite verticality and its practical applications through comparative experiments.展开更多
During the hydraulic fracturing of shale gas in the southern Sichuan Basin,China,field monitoring data have shown that hydraulic fracture(HF)propagation is restricted by height and cannot sufficiently cover vertical p...During the hydraulic fracturing of shale gas in the southern Sichuan Basin,China,field monitoring data have shown that hydraulic fracture(HF)propagation is restricted by height and cannot sufficiently cover vertical pay layers.The geomechanical behavior of gas shale in this region creates heterogeneity between the layers,which is responsible for the height restriction of HF propagation and limits the safe and efficient development of shale gas reservoirs in this region.To study vertical HF propagation,we conducted a series of laboratory hydraulic fracturing experiments under true triaxial loading.Three kinds of heterogeneity factors were tested:stress,elasticity,and interface strength.Analysis of fracture morphology and injection pressure curves resulted in several findings:(1)four types of vertical HF shapes emerged:Ishape,restricted I-shape,T-shape,and H-shape;(2)HF was induced by weakly cemented interface(s)with height limitations,while a layer under larger stress(e.g.,6 MPa)restricted fracture propagation in the middle layers,and heterogeneous elasticity was resistant;(3)regarding the geomechanical status of Changning middle-deep gas shale,interface strength may be more significant than fracture height.This study demonstrates the role of vertical heterogeneity in limiting fracture height and provides theoretical support for hydraulic fracturing optimization in this region.展开更多
Airborne area-array whisk-broom imaging systems typically adopt constant-speed scanning schemes.For large-inertia scanning systems,constant-speed scanning requires substantial time to complete the reversal motion,redu...Airborne area-array whisk-broom imaging systems typically adopt constant-speed scanning schemes.For large-inertia scanning systems,constant-speed scanning requires substantial time to complete the reversal motion,reducing the system's adaptability to high-speed reversal scanning and decreasing scanning efficiency.This study proposes a novel sinusoidal variable-speed roll scanning strategy,which reduces abrupt changes in speed and acceleration,minimizing time loss during reversals.Based on the forward image motion compensation strategy in the pitch direction,we establish a line-of-sight(LOS)position calculation model with vertical flight path correction(VFPC),ensuring that the central LOS of the scanned image remains stable on the same horizontal line,facilitating accurate image stitching in whisk-broom imaging.Through theoretical analysis and simulation experiments,the proposed method improves the scanning efficiency by approximately 18.6%at a 90o whiskbroom imaging angle under the same speed height ratio conditions.The new VFPC method enables wide-field,high-resolution imaging,achieving single-line LOS horizontal stability with an accuracy of better than O.4 mrad.The research is of great significance to promote the further development of airborne area-array whisk-broom imaging technology toward wider fields of view,higher speed height ratios,and greater scanning efficiency.展开更多
Minimizing the footprint and energy consumption of integrated Ⅲ–Ⅴ lasers necessitates tight optical confinement in all three dimensions. Limited by the small index contrast of conventional vertical epitaxy, light c...Minimizing the footprint and energy consumption of integrated Ⅲ–Ⅴ lasers necessitates tight optical confinement in all three dimensions. Limited by the small index contrast of conventional vertical epitaxy, light confinement in the vertical direction is often achieved via undercutting sacrificial layers or transferring onto foreign low-index substrates. In contrast, selective lateral heteroepitaxy enables the architecture of Ⅲ–Ⅴ-on-insulator and supports strong vertical mode confinement.展开更多
Plastic pollution and microplastics in sediments are a growing concern for marine ecosystems worldwide.We examined the vertical distribution and properties of microplastics in beach sediments of Xuwen Coral Reef Natio...Plastic pollution and microplastics in sediments are a growing concern for marine ecosystems worldwide.We examined the vertical distribution and properties of microplastics in beach sediments of Xuwen Coral Reef National Nature Reserve,in Leizhou Peninsula,Zhanjiang,China.Sediment samples were taken in seven locations at 5-cm intervals from the surface to a depth of 30 cm.The vertical distribution of microplastic particles ranged from 0 to 1340 particles per kg on average of 119.05particles per kg.The most prevalent material was fibers(76%),followed by film(12%),fragments(11.2%),and foam(0.8%).The microplastics in size of 1-2 mm constituted the largest percentage(40%)of the total,followed by those in size of<1 mm(26.4%),2-3 mm(21.2%),3-4 mm(9.6%),and 4-5 mm(2.81%).Site S1 observed maximum sizes between 1 and 2 mm,S2 reported higher availability of microplastics with sizes ranging from 0.3 to 1 mm.Six different types of polymers were identified in the investigation,and mostly were polyethylene(PE)and polypropylene(PP).In general,the observation of microplastics in deeper sediments indicates that they have the ability to last for prolonged periods in the marine environment,which may present long-term hazards to benthic creatures.In conclusion,the discovery of microplastics in deep layers of coastal sediments highlights the necessity of minimizing plastic waste and enhancing management strategies to safeguard marine environments.展开更多
基金funded by the National Research Foundation of Korea(NRF)grant from the Ministry of Science and ICT(MSIT),Republic of Korea(Nos.RS-2024-00407469 and RS-2025-00517964)the BK21 FOUR program of Graduate School,Kyung Hee University(GS-1-JO-NON-20240417)。
文摘Optimizing plant architecture for specific cultivation methods is essential for enhancing fruit productivity.Unlike indeterminate growth plants,the total productivity of determinate growth plants relies on cumulative fruit production and synchronized fruit ripening from both main and axillary shoots.Here,we focused on SlD14and SlMAX1,two key genes involved in the regulation of strigolactone(SL)signaling and biosynthesis,with the goal of maximizing yield and syn chronizing fruit ripening by fine-tuning axillary shoot growth.Using clustered regularly interspaced short palindromic repeats(CRISPR)/CRISPR-associated protein 9(Cas9)technology,we found that the sld14,slmax1,and sld14 slmax1mutant plants exhibited reduced plant height and increased axillary shoot proliferation compared to wild-type plants.However,these mutants showed reduced yield and delayed ripening,likely due to a source-sink imbalance caused by excessive axillary shoot development.A weak sld14 allele displayed a milder phenotype,maintaining total fruit yield and harvest index despite smaller individual fruit size.These findings indicate that allelic variation in SL-related genes can influence plant architecture and yield components.Our results suggest that weak or partial alleles may serve as promising targets for tailoring tomato architecture to space-limited cultivation systems.
基金jointly supported by the National Natural Science Foundation of China[grant numbers U2342202,42175005,and 42175016]the Qing Lan Project[grant number R2023Q06]。
文摘This study investigates the width of the secondary eyewall(SE)immediately following its formation in tropical cyclones with surface environmental winds aligned and counter-aligned with environmental vertical wind shear(VWS),using idealized numerical experiments.Results reveal that the SE develops greater radial extent when surface winds align with VWS compared to counter-aligned conditions.In alignment configurations,shear-enhanced surface winds on the right flank amplify surface enthalpy fluxes,thereby elevating boundary-layer entropy within the downshear outer-core region.Subsequently,more vigorous outer rainbands develop,inducing marked acceleration of tangential winds in the outer core preceding SE formation.The resultant radial expansion of supergradient winds near the boundary-layer top triggers widespread convective activity immediately beyond the inner core.Progressive axisymmetrization of this convective forcing ultimately generates an expansive SE structure.
基金supported by the National Natural Science Foundation of China(Grant No.42261134532,42405059,and U2342212)。
文摘This study investigates the relationship between atmospheric stratification (i.e., static stability given by N^(2)) and the vertical energy transfer of stationary planetary waves, and further illustrates the underlying physical mechanism. Specifically, for the simplified case of constant stratospheric N^(2), the refractive index square of planetary waves has a theoretical tendency to increase first and then decrease with an increased N^(2), whereas the group velocity weakens. Mechanistically, this behavior can be understood as an intensified suppression of vertical isentropic surface displacement caused by meridional heat transport of planetary waves under strong N^(2) conditions. Observational analysis corroborates this finding, demonstrating a reduction in the vertical-propagation velocity of waves with increased N^(2). A linear, quasi- geostrophic, mid-latitude beta-plane model with a constant background westerly wind and a prescribed N^(2) applicable to the stratosphere is used to obtain analytic solutions. In this model, the planetary waves are initiated by steady energy influx from the lower boundary. The analysis indicates that under strong N^(2) conditions, the amplitude of planetary waves can be sufficiently increased by the effective energy convergence due to the slowing vertical energy transfer, resulting in a streamfunction response in this model that contains more energy. For N^(2) with a quasi-linear vertical variation, the results bear a resemblance to the constant case, except that the wave amplitude and oscillating frequency show some vertical variations.
基金sponsored by the National Natural Science Foundation of China(Grant No.42202205)Natural Science Foundation of Shandong Province,China(Grant No.ZR2021QD072).-。
文摘The vertical heterogeneity of the pore structure in deep coal seams with varying ash yields is a key control for coalbed methane storage and producibility;however,its specific impact on gas adsorption is not clearly defined.The focus of this study is the No.8 coal seam of the Carboniferous Benxi Formation in the Central-Eastern Ordos Basin.By integrating microscopic identification,proximate analysis,gas adsorption(CO_(2),N_(2),and CH_(4)),and the multifractal theory,we quantitatively characterized the nanopore structure(micropores<2 nm and mesopores 2 nm-100 nm)of coal reservoirs with varying ash yields.The results indicate that(1)ash yield is the primary factor that controls the vertical evolution of pore structures in coal seams.In low-ash yield coal seams,the extent of thermal evolution and ash yield jointly constrain the heterogeneity of pore size distribution.In mediumto high-ash yield coal seams,the heterogeneity of pore structure and pore size distribution are predominantly constrained by ash yield.(2)As the ash yield vertically increases,the mesoporous pore volume and specific surface area initially decrease and subsequently increase,while the contribution of micropores to both pore volume and specific surface area continuously diminishes.Consequently,the total pore volume and specific surface area of the coal samples exhibit a two-stage reduction close to an ash yield threshold of approximately 20%.(3)Further,the Langmuir volume for CH_(4)adsorption sharply declines below the 20%threshold,followed by a gradual decrease;in contrast,the Langmuir pressure initially decreases and subsequently increases.Hence,the vertical increase in ash yield constrains the development of pore systems and diminishes pore connectivity,thereby reducing methane adsorption capacity and adversely affecting coalbed methane productivity.(4)Low-ash yield coal reservoirs are characterized by a rapid gas breakthrough and high productivity,whereas medium-ash yield coal reservoirs generally require prolonged depressurization to achieve peak gas production.These findings reveal that in medium-high rank coal,ash yield―and not thermal evolution―is the main factor that controls vertical pore evolution and methane adsorption efficiency.The quantitative ash yield threshold(20%)established in this study provides a practical criterion for evaluating reservoir quality and predicting vertical variations in gas storage potential in the Ordos Basin.
基金supported by the National Nature Science Foundation of China(62504130)National Key Research and Development Program of China(2018YFB0704100)+1 种基金the Key university laboratory of highly efficient utilization of solar energy and sustainable development of Guangdong(Y01256331)the Technology Development Project of Henan Province(252102240047).
文摘Two-step-processed(TSP)inverted p-i-n perovskite solar cells(PSCs)have demonstrated significant promise in tandem applications.However,the power conversion efficiency(PCE)of TSP p-i-n PSCs rarely exceeds 24%.Here,we demonstrate that TSP perovskite films exhibit a vertically gradient distribution of residual PbI_(2)clusters,which form Schottky heterojunctions with the perovskite,leading to substantial interfacial energy-level mismatches within NiO_(x)-based TSP p-i-n PSCs.These limitations were effectively addressed via a vertical interfacial engineering enabled by dual-interface modification incorporating tin trifluoromethanesulfonate(Sn(OTF)_(2))and 4-Fluorophenylethylamine chloride(F-PEA)at the NiO_(x)/perovskite and perovskite/C60 interfaces,respectively.The functional Sn(OTF)_(2)not only enhances the conductivity of NiO_(x)films but also suppresses ion migration,while inducing the formation of a Pb-Sn mixed perovskite interlayer that precisely regulates the energy level at the NiO_(x)/perovskite interface.Complementally,F-PEA post-treatment effectively converts surface residual PbI_(2)clusters into a 2D perovskite capping layer,which simultaneously passivates surface defects and enhances energy-level alignment at the perovskite/C60 interface.Consequently,the optimized NiO_(x)-based TSP p-i-n PSCs achieve a notable PCE of 25.6%with superior operational stability.This study elucidates the underlying mechanisms limiting the efficiency of TSP p-i-n PSCs,while establishing design principles for these devices targeting 26%efficiency.
基金supported by Systematic Major Project of Shuohuang Railway Development Co.,Ltd.,National Energy Group(Grant Number:SHTL-23-31)Beijing Natural Science Foundation(U22B2027).
文摘In the realm of Intelligent Railway Transportation Systems,effective multi-party collaboration is crucial due to concerns over privacy and data silos.Vertical Federated Learning(VFL)has emerged as a promising approach to facilitate such collaboration,allowing diverse entities to collectively enhance machine learning models without the need to share sensitive training data.However,existing works have highlighted VFL’s susceptibility to privacy inference attacks,where an honest but curious server could potentially reconstruct a client’s raw data from embeddings uploaded by the client.This vulnerability poses a significant threat to VFL-based intelligent railway transportation systems.In this paper,we introduce SensFL,a novel privacy-enhancing method to against privacy inference attacks in VFL.Specifically,SensFL integrates regularization of the sensitivity of embeddings to the original data into the model training process,effectively limiting the information contained in shared embeddings.By reducing the sensitivity of embeddings to the original data,SensFL can effectively resist reverse privacy attacks and prevent the reconstruction of the original data from the embeddings.Extensive experiments were conducted on four distinct datasets and three different models to demonstrate the efficacy of SensFL.Experiment results show that SensFL can effectively mitigate privacy inference attacks while maintaining the accuracy of the primary learning task.These results underscore SensFL’s potential to advance privacy protection technologies within VFL-based intelligent railway systems,addressing critical security concerns in collaborative learning environments.
基金Project(2022YJS073)supported by the Fundamental Research Funds for the Central Universities,ChinaProject(2024YFE0198500)supported by the National Key Research and Development Program of China:Intergovernmental International Science and Technology Innovation CooperationProject(U2469207)supported by the National Natural Science Foundation Railway Innovation and Development Joint Fund Project,China。
文摘Determining earth pressure on jacked pipes is essential for ensuring lining safety and calculating jacking force,especially for deep-buried pipes.To better reflect the soil arching effect resulting from the excavation of rectangular jacked pipes and the distribution of the earth pressure on jacked pipes,we present an analytical solution for predicting the vertical earth pressure on deep-buried rectangular pipe jacking tunnels,incorporating the tunnelling-induced ground loss distribution.Our proposed analytical model consists of the upper multi-layer parabolic soil arch and the lower friction arch.The key parameters(i.e.,width and height of friction arch B and height of parabolic soil arch H 1)are determined according to the existing research,and an analytical solution for K l is derived based on the distribution characteristics of the principal stress rotation angle.With consideration for the transition effect of the mechanical characteristics of the parabolic arch zone,an analytical solution for soil load transfer is derived.The prediction results of our analytical solution are compared with tests and simulation results to validate the effectiveness of the proposed analytical solution.Finally,the effects of different parameters on the soil pressure are discussed.
基金supported by National Key Research and Development Program of China,China(2024YFD1800102,2022YFD1800105 and 2022YFD1801500)National Natural Science Foundation of China,China(32372993 and 32030107)Fundamental Research Funds for the Central Universities,China(2662023PY005).
文摘Zika virus(ZIKV)is a mosquito-borne virus belonging to the genus Orthoflavivirus,and the family Flaviviridae.It commonly presents with febrile-like symptoms,neurological issues,and pregnancy complications in humans.Currently,there is no commercial vaccine or specific treatment available to prevent ZIKV infection.Therefore,controlling the epidemic's spread relies on preventing mosquitoes from transmitting the virus.Although various studies have explored the transmission of ZIKV between mosquitoes and vertebrate hosts,comprehensive research on potential mosquito-to-mosquito transmission of ZIKV remains limited.In this study,we conducted systematic laboratory investigations to assess the ability of ZIKV to spread among mosquitoes,and to evaluate the impact of ZIKV infection on mosquito development.Our findings revealed that ZIKV can be transmitted between Aedes aegypti mosquitoes both vertically and horizontally,through oviposition and contact between mosquitoes of the same or opposite sex.Additionally,we observed that ZIKV infection resulted in a reduction in the number of mosquito eggs but an increase in their size.The widespread distribution of ZIKV in infected mosquitoes and the altered levels of hormone related genes following viral infection were noted,which may contribute to viral transmission among mosquitoes and affect mosquito development.This research provides systematic experimental evidence of ZIKV transmission among mosquitoes,which is crucial for developing novel strategies to disrupt the spread of orthoflaviviruses and other mosquitoborne pathogens.
文摘To improve the vertical axis wind turbine(VAWT)design,the angle of attack(AOA)and airfoil data must be treated correctly.The present paper develops a method for determining AOA on a VAWT based on computational fluid dynamics(CFD)analysis.First,a CFD analysis of a two-bladed VAWT equipped with a NACA 0012 airfoil is conducted.The thrust and power coefficients are validated through experiments.Second,the blade force and velocity data at monitoring points are collected.The AOA at different azimuth angles is determined by removing the blade self-induction at the monitoring point.Then,the lift and drag coefficients as a function of AOA are extracted.Results show that this method is independent of the monitoring points selection located at certain distance to the blades and the extracted dynamic stall hysteresis is more precise than the one with the“usual”method without considering the self-induction from bound vortices.
基金National Key R&D Program of China,Grant/Award Number:2023YFB2503900National Natural Science Foundation of China,Grant/Award Number:12172143Shenzhen Science and Technology Program,Grant/Award Numbers:JCYJ20220818100418040,JCYJ20220530160816038。
文摘Constructing silicon(Si)-based composite electrodes that possess high energy density,long cycle life,and fast charging capability simultaneously is critical for the development of high performance lithium-ion batteries for mitigating range anxiety and slow charging issues in new energy vehicles.Herein,a thick silicon/carbon composite electrode with vertically aligned channels in the thickness direction(VC-SC)is constructed by employing a bubble formation method.Both experimental characterizations and theoretical simulations confirm that the obtained vertical channel structure can effectively address the problem of sluggish ion transport caused by high tortuosity in conventional thick electrodes,conspicuously enhance reaction kinetics,reduce polarization and side reactions,mitigate stress,increase the utilization of active materials,and promote cycling stability of the thick electrode.Consequently,when paired with LiNi_(0.6)Co_(0.2)Mn_(0.2)O_(2)(NCM622),the VC-SC||NCM622 pouch type full cell(~6.0 mAh cm^(-2))exhibits significantly improved rate performance and capacity retention compared with the SC||NCM622 full cell with the conventional silicon/carbon composite electrode without channels(SC)as the anode.The assembled VC-SC||NCM622 pouch full cell with a high energy density of 490.3 Wh kg^(-1)also reveals a remarkable fast charging capability at a high current density of 2.0 mA cm^(-2),with a capacity retention of 72.0%after 500 cycles.
基金supported by the National Natural Science Foundation of China(42304018)the National Natural Science Foundation of China(42330105,42064002,42074035)+3 种基金the Guangxi Natural Science Foundation of China(Guike AD23026177,2020GXNSFBA297145)the Foundation of Guilin University of Technology(GUTQDJJ6616032)Guangxi Key Laboratory of Spatial Information and Geomatics(21238-21-05)the Innovation Project of Guangxi Graduate Education(YCSW2023341)。
文摘The Zenith Hydrostatic Delay(ZHD)is essential for high-precision Global Navigation Satellite System(GNSS)and Very Long Baseline Interferometry(VLBI)data processing.Accurate estimation of ZHD relies on in situ atmospheric pressure,which is primarily variable in the vertical direction.Current atmospheric pressure is either site-specific or has limited spatial coverage,necessitating vertical corrections for broader applicability.This study introduces a model that uses a Gaussian function for the vertical correction of atmospheric pressure when in situ meteorological observations are unavailable.Validation with the fifth-generation European Centre for Medium-Range Weather Forecasts reanalysis(ERA5)reveals an average Bias and RMS for the new model of 0.31 h Pa and 2.96 h Pa,respectively.This corresponds to improvements of 37.5%and 80.3%in terms of RMS compared to two commonly used models(T0and Tvmodels)that require in situ meteorological observations,respectively.Additional validation with radiosonde data shows an average Bias and RMS of 1.85 h Pa and 4.87 h Pa,corresponding to the improvement of 42.8%and 71.1%in RMS compared with T0and Tv models,respectively.These accuracies are sufficient for calculating ZHD to an accuracy of 1 mm by performing atmospheric pressure vertical correction.The new model can correct atmospheric pressure from meteorological stations or numerical weather forecasts to different heights of the troposphere.
基金supported by the National Key Research and Development Program of China(No.2022YFB3604500,No.2022YFB3604501)the National Natural Science Foundation of China(No.52172141)the Technology Development Project of Shanxi-Zheda Institude of Advanced Materials and Chemical Engineering(No.2022SX-TD017).
文摘van der Waals(vdW)heterostructures constructed by lowdimensional(0D,1D,and 2D)materials are emerging as one of the most appealing systems in next-generation flexible photodetection.Currently,hand-stacked vdW-type photodetectors are not compatible with large-areaarray fabrication and show unimpressive performance in self-powered mode.Herein,vertical 1D GaN nanorods arrays(NRAs)/2D MoS_(2)/PEDOT:PSS in wafer scale have been proposed for self-powered flexible photodetectors arrays firstly.The as-integrated device without external bias under weak UV illumination exhibits a competitive responsivity of 1.47 A W^(−1)and a high detectivity of 1.2×10^(11)Jones,as well as a fast response speed of 54/71μs,thanks to the strong light absorption of GaN NRAs and the efficient photogenerated carrier separation in type-II heterojunction.Notably,the strain-tunable photodetection performances of device have been demonstrated.Impressively,the device at−0.78%strain and zero bias reveals a significantly enhanced photoresponse with a responsivity of 2.47 A W^(−1),a detectivity of 2.6×10^(11)Jones,and response times of 40/45μs,which are superior to the state-of-the-art self-powered flexible photodetectors.This work presents a valuable avenue to prepare tunable vdWs heterostructures for self-powered flexible photodetection,which performs well in flexible sensors.
基金Supported by the National Natural Science Foundation of China(42362026)Key R&D Project of Xinjiang Uygur Autonomous Region(2024B01015).
文摘In the ultra-deep strata of the Tarim Basin,the vertical growth process of strike-slip faults remains unclear,and the vertical distribution of fractured-cavity carbonate reservoirs is complex.This paper investigates the vertical growth process of strike-slip faults through field outcrop observations in the Keping area,interpretation of seismic data from the Fuman Oilfield,Tarim Basim,NW China,and structural physical simulation experiments.The results are obtained mainly in four aspects.First,field outcrops and ultra-deep seismic profiles indicate a three-layer structure within the strike-slip fault,consisting of fault core,fracture zone and primary rock.The fault core can be classified into three parts vertically:fracture-cavity unit,fault clay and breccia zone.The distribution of fracture-cavity units demonstrates a distinct pattern of vertical stratification,owing to the structural characteristics and growth process of the slip-strike fault.Second,the ultra-deep seismic profiles show multiple fracture-cavity units in the strike-slip fault zone.These units can be classified into four types:top fractured,middle connected,deep terminated,and intra-layer fractured.Third,structural physical simulation experiments and ultra-deep seismic data interpretation reveal that the strike-slip faults have evolved vertically in three stages:segmental rupture,vertical growth,and connection and extension.The particle image velocimetry detection demonstrates that the initial fracture of the fault zone occurred at the top or bottom and then evolved into cavities gradually along with the fault growth,accompanied by the emergence of new fractures in the middle part of the strata,which subsequently connected with the deep and shallow cavities to form a complete fault zone.Fourth,the ultra-deep carbonate strata primarily develop three types of fractured-cavity reservoirs:flower-shaped fracture,large and deep fault and staggered overlap.The first two types are larger in size with better reservoir conditions,suggesting a significant exploration potential.
基金supported by the National Key R&D Program of China (Grant No.2022YFF0503700)the special funds of Hubei Luojia Laboratory (Grant No.220100011)+1 种基金supported by the International Space Science Institute–Beijing(ISSI-BJ) project“The Electromagnetic Data Validation and Scientific Application Research based on CSES Satellite”and ISSI/ISSI-BJ project,“Multi-Scale Magnetosphere–Ionosphere–Thermosphere Interaction.”
文摘The Michelson Interferometer for Global High-resolution Thermospheric Imaging(MIGHTI)onboard the Ionospheric Connection Explorer(ICON)satellite offers the opportunity to investigate the altitude profile of thermospheric winds.In this study,we used the red-line measurements of MIGHTI to compare with the results estimated by Horizontal Wind Model 14(HWM14).The data selected included both the geomagnetic quiet period(December 2019 to August 2022)and the geomagnetic storm on August 26-28,2021.During the geomagnetic quiet period,the estimations of neutral winds from HWM14 showed relatively good agreement with the observations from ICON.According to the ICON observations,near the equator,zonal winds reverse from westward to eastward at around 06:00 local time(LT)at higher altitudes,and the stronger westward winds appear at later LTs at lower altitudes.At around 16:00 LT,eastward winds at 300 km reverse to westward,and vertical gradients of zonal winds similar to those at sunrise hours can be observed.In the middle latitudes,zonal winds reverse about 2-4 h earlier.Meridional winds vary more significantly than zonal winds with seasonal and latitudinal variations.According to the ICON observations,in the northern low latitudes,vertical reversals of meridional winds are found at 08:00-13:00 LT from 300 to 160 km and at around 18:00 LT from 300 to 200 km during the June solstice.Similar reversals of meridional winds are found at 04:00-07:00 LT from 300 to 160 km and at 22:00-02:00 LT from 270 to 200 km during the December solstice.In the southern low latitudes,meridional wind reversals occur at 08:00-11:00 LT from 200 to 160 km and at 21:00-02:00 LT from 300 to 200 km during the June solstice.During the December solstice,reversals of the meridional wind appear at 20:00-01:00 LT below 200 km and at 06:00-11:00 LT from 300 to 160 km.In the northern middle latitudes,the northward winds are dominant at 08:00-14:00 LT at 230 km during the June solstice.Northward winds persist until 16:00 LT at 160 and 300 km.During the December solstice,the northward winds are dominant from 06:00 to 21:00 LT.The vertical variations in neutral winds during the geomagnetic storm on August 26-28 were analyzed in detail.Both meridional and zonal winds during the active geomagnetic period observed by ICON show distinguishable vertical shear structures at different stages of the storm.On the dayside,during the main phase,the peak velocities of westward winds extend from a higher altitude to a lower altitude,whereas during the recovery phase,the peak velocities of the westward winds extend from lower altitudes to higher altitudes.The velocities of the southward winds are stronger at lower altitudes during the storm.These vertical structures of horizontal winds during the storm could not be reproduced by the HWM14 wind estimations,and the overall response to the storm of the horizontal winds in the low and middle latitudes is underestimated by HWM14.The ICON observations provide a good dataset for improving the HWM wind estimations in the middle and upper atmosphere,especially the vertical variations.
文摘BACKGROUND Wound management is an essential part of emergency medicine practice.A good suture technique should deal a complex irregular traumatic wound without any complications of dehiscence/gaping,infection,delayed wound healing,frequent dressings and further stay in hospital.There is no ideal technique of suturing for any wound.In pursuit of the new techniques,we have introduced a new suturing technique called combined oblique and vertical everting running(COVER)stitch which has showed good healing with less complications.AIM To compare the outcomes between the COVER stitch and conventional suturing group.METHODS In this study,we included 40 cases which were divided into two groups.Group 1 patients were managed by COVER stitch,and group 2 patients underwent conventional suturing for their wounds.The outcomes were measured in terms of scar quality,suturing duration and length of suture material used,suturing related complications and suture removal time which were compared by t-test usingχ^(2) test.RESULTS Better results were seen in COVER stitch than the conventional suturing.COVER group had significantly better results in terms of time taken for suture,amount suture material used and time taken for suture removal compared to the conventional group.No wound related complications were seen in this group.Moreover,scar formed was also better in COVER group.CONCLUSION COVER stitch is another new technique which can be used to deal simple to complex wounds and it is an emerging idea with good healthy scars with less complications.
文摘This article presents four techniques for assessing verticality:the plumb line approach,the total station distance technique,the three-point centering method,and the centroid method.Given the significant error associated with the total station horizontal distance technique when measuring circular piers,this paper proposes the centroid method.This method calculates verticality by determining the coordinates of the center points at both ends of the pier.Experimental findings indicate that the centroid method achieves accuracy in measuring the verticality of circular piers comparable to the three-point centering method,while offering a faster inspection process.Furthermore,the paper explores the concept of composite verticality and validates the effectiveness of the centroid method in measuring composite verticality and its practical applications through comparative experiments.
基金supported by the National Key R&D Program of China(Grant No:2023YFF0614100)the National Natural Science Foundation of China(Grant Nos:52204005,52192622,52374004)the Science and Technology Project of CNPC,China(Grant No:2023ZZ21).
文摘During the hydraulic fracturing of shale gas in the southern Sichuan Basin,China,field monitoring data have shown that hydraulic fracture(HF)propagation is restricted by height and cannot sufficiently cover vertical pay layers.The geomechanical behavior of gas shale in this region creates heterogeneity between the layers,which is responsible for the height restriction of HF propagation and limits the safe and efficient development of shale gas reservoirs in this region.To study vertical HF propagation,we conducted a series of laboratory hydraulic fracturing experiments under true triaxial loading.Three kinds of heterogeneity factors were tested:stress,elasticity,and interface strength.Analysis of fracture morphology and injection pressure curves resulted in several findings:(1)four types of vertical HF shapes emerged:Ishape,restricted I-shape,T-shape,and H-shape;(2)HF was induced by weakly cemented interface(s)with height limitations,while a layer under larger stress(e.g.,6 MPa)restricted fracture propagation in the middle layers,and heterogeneous elasticity was resistant;(3)regarding the geomechanical status of Changning middle-deep gas shale,interface strength may be more significant than fracture height.This study demonstrates the role of vertical heterogeneity in limiting fracture height and provides theoretical support for hydraulic fracturing optimization in this region.
基金Supported by the National Key Research and Development Program(2023YFC3107602)。
文摘Airborne area-array whisk-broom imaging systems typically adopt constant-speed scanning schemes.For large-inertia scanning systems,constant-speed scanning requires substantial time to complete the reversal motion,reducing the system's adaptability to high-speed reversal scanning and decreasing scanning efficiency.This study proposes a novel sinusoidal variable-speed roll scanning strategy,which reduces abrupt changes in speed and acceleration,minimizing time loss during reversals.Based on the forward image motion compensation strategy in the pitch direction,we establish a line-of-sight(LOS)position calculation model with vertical flight path correction(VFPC),ensuring that the central LOS of the scanned image remains stable on the same horizontal line,facilitating accurate image stitching in whisk-broom imaging.Through theoretical analysis and simulation experiments,the proposed method improves the scanning efficiency by approximately 18.6%at a 90o whiskbroom imaging angle under the same speed height ratio conditions.The new VFPC method enables wide-field,high-resolution imaging,achieving single-line LOS horizontal stability with an accuracy of better than O.4 mrad.The research is of great significance to promote the further development of airborne area-array whisk-broom imaging technology toward wider fields of view,higher speed height ratios,and greater scanning efficiency.
基金National Natural Science Foundation of China(62475289,RLZY20231001-02,62135012)。
文摘Minimizing the footprint and energy consumption of integrated Ⅲ–Ⅴ lasers necessitates tight optical confinement in all three dimensions. Limited by the small index contrast of conventional vertical epitaxy, light confinement in the vertical direction is often achieved via undercutting sacrificial layers or transferring onto foreign low-index substrates. In contrast, selective lateral heteroepitaxy enables the architecture of Ⅲ–Ⅴ-on-insulator and supports strong vertical mode confinement.
基金Supported by the Southern Marine Science and Engineering Guangdong Laboratory、Zhanjiang(No.ZJW-2019-08)APN、CRRP2019-09MYOnodera、Shinichi Onodera、and the SCS Scholar Grant(No.002029002008/2019)。
文摘Plastic pollution and microplastics in sediments are a growing concern for marine ecosystems worldwide.We examined the vertical distribution and properties of microplastics in beach sediments of Xuwen Coral Reef National Nature Reserve,in Leizhou Peninsula,Zhanjiang,China.Sediment samples were taken in seven locations at 5-cm intervals from the surface to a depth of 30 cm.The vertical distribution of microplastic particles ranged from 0 to 1340 particles per kg on average of 119.05particles per kg.The most prevalent material was fibers(76%),followed by film(12%),fragments(11.2%),and foam(0.8%).The microplastics in size of 1-2 mm constituted the largest percentage(40%)of the total,followed by those in size of<1 mm(26.4%),2-3 mm(21.2%),3-4 mm(9.6%),and 4-5 mm(2.81%).Site S1 observed maximum sizes between 1 and 2 mm,S2 reported higher availability of microplastics with sizes ranging from 0.3 to 1 mm.Six different types of polymers were identified in the investigation,and mostly were polyethylene(PE)and polypropylene(PP).In general,the observation of microplastics in deeper sediments indicates that they have the ability to last for prolonged periods in the marine environment,which may present long-term hazards to benthic creatures.In conclusion,the discovery of microplastics in deep layers of coastal sediments highlights the necessity of minimizing plastic waste and enhancing management strategies to safeguard marine environments.
