To coordinate the various access technologies in the 4G communication system,intelligent vertical handoff algorithms are required.This paper mainly deals with a novel vertical handoff decision algorithm based on fuzzy...To coordinate the various access technologies in the 4G communication system,intelligent vertical handoff algorithms are required.This paper mainly deals with a novel vertical handoff decision algorithm based on fuzzy logic with the aid of grey theory and dynamic weights adaptation.The grey prediction theory(GPT) takes 4 sampled received signal strengths as input parameters,and calculates the predicted received signal strength in order to reduce the call dropping probability.The fuzzy logic theory based quantitative decision algorithm takes 3 quality of service(QoS)metric,received signal strength(RSS),available bandwidth(BW),and monetary cost (MC)of candidate networks as input parameters.The weight of each QoS metrics is adjusted along with the networks changing to trace the network condition.The final optimized vertical handoff decision is made by comparing the quantitative decision values of the candidate networks.Simulation results demonstrate that the proposed algorithm provides high performance in heterogeneous as well as homogeneous network environments.展开更多
Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ri...Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ring's position is asymmetrical.All of these cause that the ring's dimensions cannot be measured directly.Through analyzing the relationships among the dimensions of ring blanks,the positions of rolls and the ring's inner and outer diameter,the soft measurement model of ring's dimensions is established based on the radial basis function neural network(RBFNN).A mass of data samples are obtained from VHRR finite element(FE) simulations to train and test the soft measurement NN model,and the model's structure parameters are deduced and optimized by genetic algorithm(GA).Finally,the soft measurement system of ring's dimensions is established and validated by the VHRR experiments.The ring's dimensions were measured artificially and calculated by the soft measurement NN model.The results show that the calculation values of GA-RBFNN model are close to the artificial measurement data.In addition,the calculation accuracy of GA-RBFNN model is higher than that of RBFNN model.The research results suggest that the soft measurement NN model has high precision and flexibility.The research can provide practical methods and theoretical guidance for the accurate measurement of VHRR process.展开更多
To eliminate distortion caused by vertical drift and illusory slopes in atomic force microscopy(AFM)imaging,a lifting-wavelet-based iterative thresholding correction method is proposed in this paper.This method achiev...To eliminate distortion caused by vertical drift and illusory slopes in atomic force microscopy(AFM)imaging,a lifting-wavelet-based iterative thresholding correction method is proposed in this paper.This method achieves high-quality AFM imaging via line-by-line corrections for each distorted profile along the fast axis.The key to this line-by-line correction is to accurately simulate the profile distortion of each scanning row.Therefore,a data preprocessing approach is first developed to roughly filter out most of the height data that impairs the accuracy of distortion modeling.This process is implemented through an internal double-screening mechanism.A line-fitting method is adopted to preliminarily screen out the obvious specimens.Lifting wavelet analysis is then carried out to identify the base parts that are mistakenly filtered out as specimens so as to preserve most of the base profiles and provide a good basis for further distortion modeling.Next,an iterative thresholding algorithm is developed to precisely simulate the profile distortion.By utilizing the roughly screened base profile,the optimal threshold,which is used to screen out the pure bases suitable for distortion modeling,is determined through iteration with a specified error rule.On this basis,the profile distortion is accurately modeled through line fitting on the finely screened base data,and the correction is implemented by subtracting the modeling result from the distorted profile.Finally,the effectiveness of the proposed method is verified through experiments and applications.展开更多
In this paper.Active Disturbance Rejection Control(ADRC)is utilized in the pitch control of a vertical take-off and landing fixed-wing Unmanned Aerial Vehicle(UAV)to address the problem of height fluctuation during th...In this paper.Active Disturbance Rejection Control(ADRC)is utilized in the pitch control of a vertical take-off and landing fixed-wing Unmanned Aerial Vehicle(UAV)to address the problem of height fluctuation during the transition from hover to level flight.Considering the difficulty of parameter tuning of ADRC as well as the requirement of accuracy and rapidity of the controller,a Multi-Strategy Pigeon-Inspired Optimization(MSPIO)algorithm is employed.Particle Swarm Optimization(PSO),Genetic Algorithm(GA),the basic Pigeon-Inspired Optimization(PIO),and an improved PIO algorithm CMPIO are compared.In addition,the optimized ADRC control system is compared with the pure Proportional-Integral-Derivative(PID)control system and the non-optimized ADRC control system.The effectiveness of the designed control strategy for forward transition is verified and the faster convergence speed and better exploitation ability of the proposed MSPIO algorithm are confirmed by simulation results.展开更多
A variable mass tuned particle absorber is designed for the nonlinear vertical vibration control of the corrugated rolling mill in the composite plate rolling process.Considering the nonlinear damping and nonlinear st...A variable mass tuned particle absorber is designed for the nonlinear vertical vibration control of the corrugated rolling mill in the composite plate rolling process.Considering the nonlinear damping and nonlinear stiffness between the corrugated interface,a three-degree-of-freedom nonlinear vertical vibration mathematical model of corrugated rolling mill based on dynamic vibration absorber control is established.The multi-scale method is used to solve the amplitude–frequency characteristic curve equation of the installed dynamic vibration absorber(DVA)system.The effects of stiffness coefficient and damping coefficient on the amplitude–frequency characteristic curve are analyzed.The expressions of the dynamic developed factor of the corrugated roll are derived,and the influence laws of mass ratio,frequency ratio and damping ratio on the dynamic amplification factor are analyzed.The optimal parameters of the DVA are obtained by adaptive genetic algorithm.The control effect of the DVA on the nonlinear vertical vibration is studied by numerical simulation.The feasibility of the designed dynamic absorber is verified through experiments.The results show that the designed dynamic absorber can effectively suppress the vertical vibration of the corrugated roller.展开更多
A kind of single linked lists named aggregative chain is introduced to the algorithm, thus improving the architecture of FP tree. The new FP tree is a one-way tree and only the pointers that point its parent at each n...A kind of single linked lists named aggregative chain is introduced to the algorithm, thus improving the architecture of FP tree. The new FP tree is a one-way tree and only the pointers that point its parent at each node are kept. Route information of different nodes in a same item are compressed into aggregative chains so that the frequent patterns will be produced in aggregative chains without generating node links and conditional pattern bases. An example of Web key words retrieval is given to analyze and verify the frequent pattern algorithm in this paper.展开更多
The transformation of the magnetization direction and the magnetic fi eld component is one of the important methods in magnetic data processing and transformation,which can be conducted in both wavenumber and spatial ...The transformation of the magnetization direction and the magnetic fi eld component is one of the important methods in magnetic data processing and transformation,which can be conducted in both wavenumber and spatial domains.The transformation method in the wavenumber domain has simpler processing expression and higher processing effi ciency than in the spatial domain;however,they are unstable at low latitude.In this paper,the conclusion that the sum is 0 of two vertical magnetic fi eld components(magnetization inclinations are also perpendicular)in 2D is used for the 3D transformation of the magnetization direction and the magnetic field component.In addition,the transformation method at low latitudes based on vertical relationship(VMT)is proposed,which is an iterative algorithm that converts the transformation of the magnetization direction and the magnetic field component at the low latitude into the high latitude.This method restrains the instability of transformation of constant and variable magnetization direction and magnetic fi eld components in low latitudes.The accuracy,stability,and practicality are verifi ed from synthetic models and real data.展开更多
Two modified BP algorithms related to vertical and horizontal processes are proposed to accelerate iterative low-density parity- check （LDPC） decoding over an additive white Gaussian noise （AWGN） channel, where th...Two modified BP algorithms related to vertical and horizontal processes are proposed to accelerate iterative low-density parity- check （LDPC） decoding over an additive white Gaussian noise （AWGN） channel, where the newly updated extrinsic information is immediately used in the current decoding round. Theoretical analysis and simulation results demonstrate that both the modified approaches provide significant performance improvements over the traditional BP algorithm with almost no additional decoding complexity. The proposed algorithm with modified horizontal process offers even better performance than another algorithm with the modified horizontal process. The two modified BP algorithms are very promising in practical communications since both can achieve an excellent trade-off between the performance and decoding complexity.展开更多
In this research, Computational analysis of the laminar natural convection on vertical surfaces has been in-vestigated. Natural convection is observed when density gradients are present in a fluid acted upon by a grav...In this research, Computational analysis of the laminar natural convection on vertical surfaces has been in-vestigated. Natural convection is observed when density gradients are present in a fluid acted upon by a gravitational field. Our example of this phenomenon is the heated vertical plate exposed to air, which, far from the plate, is motionless. The CFD simulations are carried out using fluent software. Governing equa-tions are solved using a finite volume approach. Coupling between the velocity and pressure is made with SIMPLE algorithm. The resultant system of discretized linear algebraic equations is solved with an alternat-ing direction implicit scheme. Then a configuration of rectangular fins is put in different ways on the surface and natural convection heat transfer coefficient on these no slope surfaces is studied and finally optimization is done.展开更多
Numerical simulations are conducted to improve the energy acquisition efficiency of H-type vertical axis wind turbines through the optimization of the related blade airfoil aerodynamic performance.The Bézier curve...Numerical simulations are conducted to improve the energy acquisition efficiency of H-type vertical axis wind turbines through the optimization of the related blade airfoil aerodynamic performance.The Bézier curve is initi-ally used tofit the curve profile of a NACA2412 airfoil,and the moving asymptote algorithm is then exploited to optimize the design of the considered H-type vertical-axis wind-turbine blade airfoil for a certain attack angle.The results show that the maximum lift coefficient of the optimized airfoil is 8.33%higher than that of the original airfoil.The maximum lift-to-drag ratio of the optimized airfoil exceeds the maximum lift-to-drag ratio of the ori-ginal airfoil by 11.22%.Moreover,the power coefficient is increased by 12.19%and the torque coefficient of the wind turbine is significantly improved.展开更多
Korean characters consist of 2 dimensional distributed consonantal and vowel graphemes. The purpose of reducing the 2 dimensional characteristics of Korean characters to linear arrangements at early stage of character...Korean characters consist of 2 dimensional distributed consonantal and vowel graphemes. The purpose of reducing the 2 dimensional characteristics of Korean characters to linear arrangements at early stage of character recognition is to decrease the complexity of following recognition task. By defining the identification codes for the vowel graphemes of Korean characters, the rules for combination of vowel graphemes are established, and a recognition algorithm based on the rules for combination of vowel graphemes, is therefore proposed for vertical vowel graphemes. The algorithm has been proved feasilbe through demonstrating simulations.展开更多
The vertical two-dimensional non-hydrostatic pressure models with multiple layers can make prediction more accurate than those obtained by the hydrostatic pres- sure assumption. However, they are time-consuming and un...The vertical two-dimensional non-hydrostatic pressure models with multiple layers can make prediction more accurate than those obtained by the hydrostatic pres- sure assumption. However, they are time-consuming and unstable, which makes them unsuitable for wider application. In this study, an efficient model with a single layer is developed. Decomposing the pressure into the hydrostatic and dynamic components and integrating the x-momentum equation from the bottom to the free surface can yield a horizontal momentum equation, in which the terms relevant to the dynamic pressure are discretized semi-implicitly. The convective terms in the vertical momentum equation are ignored, and the rest of the equation is approximated with the Keller-box scheme. The velocities expressed as the unknown dynamic pressure are substituted into the continuity equation, resulting in a tri-diagonal linear system solved by the Thomas algorithm. The validation of solitary and sinusoidal waves indicates that the present model can provide comparable results to the models with multiple layers but at much lower computation cost.展开更多
In this paper, the laminar heat transfer of natural convection on vertical surfaces is investigated. Most of the studies on natural convection have been considered constantly whereas velocity and temperature domain, d...In this paper, the laminar heat transfer of natural convection on vertical surfaces is investigated. Most of the studies on natural convection have been considered constantly whereas velocity and temperature domain, do not change with time, transient one are used a lot. Governing equations are solved using a finite volume approach. The convective terms are discretized using the power-law scheme, whereas for diffusive terms the central difference is employed. Coupling between the velocity and pressure is made with SIMPLE algorithm. The resultant system of discretized linear algebraic equations is solved with an alternating direction implicit scheme. Then a configuration of rectangular fins is put in different ways on the surface and heat transfer of natural convection on these surfaces without sliding is studied and finally optimization is investigated.展开更多
The data in Mobile Edge Computing(MEC)contains tremendousmarket value,and data sharing canmaximize the usefulness of the data.However,certain data is quite sensitive,and sharing it directly may violate privacy.Vertica...The data in Mobile Edge Computing(MEC)contains tremendousmarket value,and data sharing canmaximize the usefulness of the data.However,certain data is quite sensitive,and sharing it directly may violate privacy.Vertical Federated Learning(VFL)is a secure distributed machine learning framework that completes joint model training by passing encryptedmodel parameters rather than raw data,so there is no data privacy leakage during the training process.Therefore,the VFL can build a bridge between data demander and owner to realize data sharing while protecting data privacy.Typically,the VFL requires a third party for key distribution and decryption of training results.In this article,we employ the consortium blockchain instead of the traditional third party and design a VFL architecture based on the consortium blockchain for data sharing in MEC.More specifically,we propose a V-Raft consensus algorithm based on Verifiable Random Functions(VRFs),which is a variant of the Raft.The VRaft is able to elect leader quickly and stably to assist data demander and owner to complete data sharing by VFL.Moreover,we apply secret sharing todistribute the private key to avoid the situationwhere the training result cannot be decrypted if the leader crashes.Finally,we analyzed the performance of the V-Raft and carried out simulation experiments,and the results show that compared with Raft,the V-Raft has higher efficiency and better scalability.展开更多
Recently, there is a growing interest in seismic qualification of ridges, buildings and mechanical equipment worldwide due to increase of accidents caused by earthquake. Severe earthquake can bring serious problems in...Recently, there is a growing interest in seismic qualification of ridges, buildings and mechanical equipment worldwide due to increase of accidents caused by earthquake. Severe earthquake can bring serious problems in the wind turbines and eventually lead to an interruption to their electric power supply. To overcome and prevent these undesirable problems, structural design optimization of a small vertical axis wind turbine has performed, in this study, for seismic qualification and lightweight by using a Genetic Algorithm (GA) subject to some design constraints such as the maximum stress limit, maximum deformation limit, and seismic acceleration gain limit. Also, the structural design optimizations were conducted for the four different initial design variable sets to confirm robustness of the optimization algorithm used. As a result, all the optimization results for the 4 different initial designs showed good agreement with each other properly. Thus the structural design optimization of a small vertical-axis wind turbine could be successfully accomplished.展开更多
With the increasing deployment of Unmanned Aerial Vehicle-Hangar(UAV-H)clusters in dynamic environments such as disaster response and precision agriculture,existing networking schemes often struggle with adaptability ...With the increasing deployment of Unmanned Aerial Vehicle-Hangar(UAV-H)clusters in dynamic environments such as disaster response and precision agriculture,existing networking schemes often struggle with adaptability to complex scenarios,while traditional Vertical Handoff(VHO)algorithms fail to fully address the unique challenges of UAV-H systems,including high-speed mobility and limited computational resources.To bridge this gap,this paper proposes a heterogeneous network architecture integrating 5th Generation Mobile Communication Technology(5G)cellular networks and self-organizing mesh networks for UAV-H clusters,accompanied by a novel VHO algorithm.The proposed algorithm leverages Multi-Attribute Decision-Making(MADM)theory combined with Genetic Algorithm(GA)optimization,incorporating edge computing to enable real-time decision-making and offload computational tasks efficiently.By constructing a utility function through attribute and weight matrices,the algorithm ensures UAV-H clusters dynamically select the optimal network access with the highest utility value.Simulation results demonstrate that the proposed method reduces network handoff times by 26.13%compared to the Decision Tree VHO(DT-VHO),effectively mitigating the ping-pong effect,and enhancing total system throughput by 19.99%under the same conditions.In terms of handoff delay,it outperforms the Artificial Neural Network VHO(ANN-VHO),significantly improving the Quality of Service(QoS).Finally,real-world hardware platform experiments validate the algorithm’s feasibility and superior performance in practical UAV-H cluster operations.This work provides a robust solution for seamless network connectivity in high-mobility UAV clusters,offering critical support for emerging applications requiring reliable and efficient wireless communication.展开更多
Based on the model of the same degree of all nodes we proposed before, a new algorithm, the so-called “spread all over vertices” （SAV） algorithm, is proposed for generating small-world properties from a regular ri...Based on the model of the same degree of all nodes we proposed before, a new algorithm, the so-called “spread all over vertices” （SAV） algorithm, is proposed for generating small-world properties from a regular ring lattices. During randomly rewiring connections the SAV is used to keep the unchanged number of links. Comparing the SAV algorithm with the Watts-Strogatz model and the “spread all over boundaries” algorithm, three methods can have the same topological properties of the small world networks. These results offer diverse formation of small world networks. It is helpful to the research of some applications for dynamics of mutual oscillator inside nodes and interacting automata associated with networks.展开更多
基金the National Natural Science Foundation of China(Nos.60832009,60872017 and 60772100)
文摘To coordinate the various access technologies in the 4G communication system,intelligent vertical handoff algorithms are required.This paper mainly deals with a novel vertical handoff decision algorithm based on fuzzy logic with the aid of grey theory and dynamic weights adaptation.The grey prediction theory(GPT) takes 4 sampled received signal strengths as input parameters,and calculates the predicted received signal strength in order to reduce the call dropping probability.The fuzzy logic theory based quantitative decision algorithm takes 3 quality of service(QoS)metric,received signal strength(RSS),available bandwidth(BW),and monetary cost (MC)of candidate networks as input parameters.The weight of each QoS metrics is adjusted along with the networks changing to trace the network condition.The final optimized vertical handoff decision is made by comparing the quantitative decision values of the candidate networks.Simulation results demonstrate that the proposed algorithm provides high performance in heterogeneous as well as homogeneous network environments.
基金Project(51205299)supported by the National Natural Science Foundation of ChinaProject(2015M582643)supported by the China Postdoctoral Science Foundation+2 种基金Project(2014BAA008)supported by the Science and Technology Support Program of Hubei Province,ChinaProject(2014-IV-144)supported by the Fundamental Research Funds for the Central Universities of ChinaProject(2012AAA07-01)supported by the Major Science and Technology Achievements Transformation&Industrialization Program of Hubei Province,China
文摘Vertical hot ring rolling(VHRR) process has the characteristics of nonlinearity,time-variation and being susceptible to disturbance.Furthermore,the ring's growth is quite fast within a short time,and the rolled ring's position is asymmetrical.All of these cause that the ring's dimensions cannot be measured directly.Through analyzing the relationships among the dimensions of ring blanks,the positions of rolls and the ring's inner and outer diameter,the soft measurement model of ring's dimensions is established based on the radial basis function neural network(RBFNN).A mass of data samples are obtained from VHRR finite element(FE) simulations to train and test the soft measurement NN model,and the model's structure parameters are deduced and optimized by genetic algorithm(GA).Finally,the soft measurement system of ring's dimensions is established and validated by the VHRR experiments.The ring's dimensions were measured artificially and calculated by the soft measurement NN model.The results show that the calculation values of GA-RBFNN model are close to the artificial measurement data.In addition,the calculation accuracy of GA-RBFNN model is higher than that of RBFNN model.The research results suggest that the soft measurement NN model has high precision and flexibility.The research can provide practical methods and theoretical guidance for the accurate measurement of VHRR process.
基金supported by the National Natural Science Foundation of China under Grant No.21933006.
文摘To eliminate distortion caused by vertical drift and illusory slopes in atomic force microscopy(AFM)imaging,a lifting-wavelet-based iterative thresholding correction method is proposed in this paper.This method achieves high-quality AFM imaging via line-by-line corrections for each distorted profile along the fast axis.The key to this line-by-line correction is to accurately simulate the profile distortion of each scanning row.Therefore,a data preprocessing approach is first developed to roughly filter out most of the height data that impairs the accuracy of distortion modeling.This process is implemented through an internal double-screening mechanism.A line-fitting method is adopted to preliminarily screen out the obvious specimens.Lifting wavelet analysis is then carried out to identify the base parts that are mistakenly filtered out as specimens so as to preserve most of the base profiles and provide a good basis for further distortion modeling.Next,an iterative thresholding algorithm is developed to precisely simulate the profile distortion.By utilizing the roughly screened base profile,the optimal threshold,which is used to screen out the pure bases suitable for distortion modeling,is determined through iteration with a specified error rule.On this basis,the profile distortion is accurately modeled through line fitting on the finely screened base data,and the correction is implemented by subtracting the modeling result from the distorted profile.Finally,the effectiveness of the proposed method is verified through experiments and applications.
基金supported by Science and Technology Innovation 2030-Key Project of"New Generation Artificial Intelli-gence",China(No.2018AAA0100803)National Natural Science Foundation of China(Nos.U20B2071,91948204,U1913602)Aeronautical Foundation of China(No.20185851022).
文摘In this paper.Active Disturbance Rejection Control(ADRC)is utilized in the pitch control of a vertical take-off and landing fixed-wing Unmanned Aerial Vehicle(UAV)to address the problem of height fluctuation during the transition from hover to level flight.Considering the difficulty of parameter tuning of ADRC as well as the requirement of accuracy and rapidity of the controller,a Multi-Strategy Pigeon-Inspired Optimization(MSPIO)algorithm is employed.Particle Swarm Optimization(PSO),Genetic Algorithm(GA),the basic Pigeon-Inspired Optimization(PIO),and an improved PIO algorithm CMPIO are compared.In addition,the optimized ADRC control system is compared with the pure Proportional-Integral-Derivative(PID)control system and the non-optimized ADRC control system.The effectiveness of the designed control strategy for forward transition is verified and the faster convergence speed and better exploitation ability of the proposed MSPIO algorithm are confirmed by simulation results.
基金National Key Research and Development Project(2018YFA0707300)National Natural Science Foundation of China(52205404)Fundamental Research Program of Shanxi Province(202203021212293).
文摘A variable mass tuned particle absorber is designed for the nonlinear vertical vibration control of the corrugated rolling mill in the composite plate rolling process.Considering the nonlinear damping and nonlinear stiffness between the corrugated interface,a three-degree-of-freedom nonlinear vertical vibration mathematical model of corrugated rolling mill based on dynamic vibration absorber control is established.The multi-scale method is used to solve the amplitude–frequency characteristic curve equation of the installed dynamic vibration absorber(DVA)system.The effects of stiffness coefficient and damping coefficient on the amplitude–frequency characteristic curve are analyzed.The expressions of the dynamic developed factor of the corrugated roll are derived,and the influence laws of mass ratio,frequency ratio and damping ratio on the dynamic amplification factor are analyzed.The optimal parameters of the DVA are obtained by adaptive genetic algorithm.The control effect of the DVA on the nonlinear vertical vibration is studied by numerical simulation.The feasibility of the designed dynamic absorber is verified through experiments.The results show that the designed dynamic absorber can effectively suppress the vertical vibration of the corrugated roller.
基金Supported by the Natural Science Foundation ofLiaoning Province (20042020)
文摘A kind of single linked lists named aggregative chain is introduced to the algorithm, thus improving the architecture of FP tree. The new FP tree is a one-way tree and only the pointers that point its parent at each node are kept. Route information of different nodes in a same item are compressed into aggregative chains so that the frequent patterns will be produced in aggregative chains without generating node links and conditional pattern bases. An example of Web key words retrieval is given to analyze and verify the frequent pattern algorithm in this paper.
基金supported by the subject“Study on the Comprehensive Processing and Interpretation Method and Software Development for Aerial Geophysics(No.2017YFC0602202)”from National major Research and Development Project of China(No.2017YFC0602200)。
文摘The transformation of the magnetization direction and the magnetic fi eld component is one of the important methods in magnetic data processing and transformation,which can be conducted in both wavenumber and spatial domains.The transformation method in the wavenumber domain has simpler processing expression and higher processing effi ciency than in the spatial domain;however,they are unstable at low latitude.In this paper,the conclusion that the sum is 0 of two vertical magnetic fi eld components(magnetization inclinations are also perpendicular)in 2D is used for the 3D transformation of the magnetization direction and the magnetic field component.In addition,the transformation method at low latitudes based on vertical relationship(VMT)is proposed,which is an iterative algorithm that converts the transformation of the magnetization direction and the magnetic field component at the low latitude into the high latitude.This method restrains the instability of transformation of constant and variable magnetization direction and magnetic fi eld components in low latitudes.The accuracy,stability,and practicality are verifi ed from synthetic models and real data.
基金National Mobile Communication Research Laboratory,Southeast University(No.W200704),ChinaNatural Science foundation of Jiangsu Province (No.BK2006188),ChinaQuebec-China Joint Research Foundation by McGill University,Montreal,Quebec,Canada
文摘Two modified BP algorithms related to vertical and horizontal processes are proposed to accelerate iterative low-density parity- check （LDPC） decoding over an additive white Gaussian noise （AWGN） channel, where the newly updated extrinsic information is immediately used in the current decoding round. Theoretical analysis and simulation results demonstrate that both the modified approaches provide significant performance improvements over the traditional BP algorithm with almost no additional decoding complexity. The proposed algorithm with modified horizontal process offers even better performance than another algorithm with the modified horizontal process. The two modified BP algorithms are very promising in practical communications since both can achieve an excellent trade-off between the performance and decoding complexity.
文摘In this research, Computational analysis of the laminar natural convection on vertical surfaces has been in-vestigated. Natural convection is observed when density gradients are present in a fluid acted upon by a gravitational field. Our example of this phenomenon is the heated vertical plate exposed to air, which, far from the plate, is motionless. The CFD simulations are carried out using fluent software. Governing equa-tions are solved using a finite volume approach. Coupling between the velocity and pressure is made with SIMPLE algorithm. The resultant system of discretized linear algebraic equations is solved with an alternat-ing direction implicit scheme. Then a configuration of rectangular fins is put in different ways on the surface and natural convection heat transfer coefficient on these no slope surfaces is studied and finally optimization is done.
基金This study was supported by the following research funding.Natural Science Foundation of Anhui Province,China,Grant Number 1908085ME166Research on the Key Technology of Multipole Grain Sampling and Inspection Equipment Based on Machine Vision,Anhui Provincial Grain Machinery Rural Development Collaborative Technology Service Center,Grant Number GXXT-2022-077+3 种基金Research on the Preparation Process and Application of Biochar Made of Bamboo,Science and Technology Bureau of Chuzhou City,Grant Number 2022ZN014The Development and Industrialization of Fruit Sorting Equipment,Science and Technology Bureau of Chuzhou City,Grant Number 2022ZN016Natural Science Major Project of Anhui Provincial Education Department,Anhui Provincial Education Department,Grant Number 2022AH040238Key Scientific Research Project of Anhui Provincial Education Department,Anhui Provincial Education Department,Grant Number KJ2021A0877.
文摘Numerical simulations are conducted to improve the energy acquisition efficiency of H-type vertical axis wind turbines through the optimization of the related blade airfoil aerodynamic performance.The Bézier curve is initi-ally used tofit the curve profile of a NACA2412 airfoil,and the moving asymptote algorithm is then exploited to optimize the design of the considered H-type vertical-axis wind-turbine blade airfoil for a certain attack angle.The results show that the maximum lift coefficient of the optimized airfoil is 8.33%higher than that of the original airfoil.The maximum lift-to-drag ratio of the optimized airfoil exceeds the maximum lift-to-drag ratio of the ori-ginal airfoil by 11.22%.Moreover,the power coefficient is increased by 12.19%and the torque coefficient of the wind turbine is significantly improved.
文摘Korean characters consist of 2 dimensional distributed consonantal and vowel graphemes. The purpose of reducing the 2 dimensional characteristics of Korean characters to linear arrangements at early stage of character recognition is to decrease the complexity of following recognition task. By defining the identification codes for the vowel graphemes of Korean characters, the rules for combination of vowel graphemes are established, and a recognition algorithm based on the rules for combination of vowel graphemes, is therefore proposed for vertical vowel graphemes. The algorithm has been proved feasilbe through demonstrating simulations.
基金Project supported by the Specialized Research Fund for the Doctoral Program of Higher Education(No. 20110142110064)the Ministry of Water Resources’ Science and Technology Promotion Plan Program (No. TG1316)
文摘The vertical two-dimensional non-hydrostatic pressure models with multiple layers can make prediction more accurate than those obtained by the hydrostatic pres- sure assumption. However, they are time-consuming and unstable, which makes them unsuitable for wider application. In this study, an efficient model with a single layer is developed. Decomposing the pressure into the hydrostatic and dynamic components and integrating the x-momentum equation from the bottom to the free surface can yield a horizontal momentum equation, in which the terms relevant to the dynamic pressure are discretized semi-implicitly. The convective terms in the vertical momentum equation are ignored, and the rest of the equation is approximated with the Keller-box scheme. The velocities expressed as the unknown dynamic pressure are substituted into the continuity equation, resulting in a tri-diagonal linear system solved by the Thomas algorithm. The validation of solitary and sinusoidal waves indicates that the present model can provide comparable results to the models with multiple layers but at much lower computation cost.
文摘In this paper, the laminar heat transfer of natural convection on vertical surfaces is investigated. Most of the studies on natural convection have been considered constantly whereas velocity and temperature domain, do not change with time, transient one are used a lot. Governing equations are solved using a finite volume approach. The convective terms are discretized using the power-law scheme, whereas for diffusive terms the central difference is employed. Coupling between the velocity and pressure is made with SIMPLE algorithm. The resultant system of discretized linear algebraic equations is solved with an alternating direction implicit scheme. Then a configuration of rectangular fins is put in different ways on the surface and heat transfer of natural convection on these surfaces without sliding is studied and finally optimization is investigated.
基金funded by the National Natural Science Foundation(61962009)the National Natural Science Foundation(62202118)+1 种基金Top Technology Talent Project from Guizhou Education Department(Qianjiao ji[2022]073)Foundation of Guangxi Key Laboratory of Cryptography and Information Security(GCIS202118).
文摘The data in Mobile Edge Computing(MEC)contains tremendousmarket value,and data sharing canmaximize the usefulness of the data.However,certain data is quite sensitive,and sharing it directly may violate privacy.Vertical Federated Learning(VFL)is a secure distributed machine learning framework that completes joint model training by passing encryptedmodel parameters rather than raw data,so there is no data privacy leakage during the training process.Therefore,the VFL can build a bridge between data demander and owner to realize data sharing while protecting data privacy.Typically,the VFL requires a third party for key distribution and decryption of training results.In this article,we employ the consortium blockchain instead of the traditional third party and design a VFL architecture based on the consortium blockchain for data sharing in MEC.More specifically,we propose a V-Raft consensus algorithm based on Verifiable Random Functions(VRFs),which is a variant of the Raft.The VRaft is able to elect leader quickly and stably to assist data demander and owner to complete data sharing by VFL.Moreover,we apply secret sharing todistribute the private key to avoid the situationwhere the training result cannot be decrypted if the leader crashes.Finally,we analyzed the performance of the V-Raft and carried out simulation experiments,and the results show that compared with Raft,the V-Raft has higher efficiency and better scalability.
文摘Recently, there is a growing interest in seismic qualification of ridges, buildings and mechanical equipment worldwide due to increase of accidents caused by earthquake. Severe earthquake can bring serious problems in the wind turbines and eventually lead to an interruption to their electric power supply. To overcome and prevent these undesirable problems, structural design optimization of a small vertical axis wind turbine has performed, in this study, for seismic qualification and lightweight by using a Genetic Algorithm (GA) subject to some design constraints such as the maximum stress limit, maximum deformation limit, and seismic acceleration gain limit. Also, the structural design optimizations were conducted for the four different initial design variable sets to confirm robustness of the optimization algorithm used. As a result, all the optimization results for the 4 different initial designs showed good agreement with each other properly. Thus the structural design optimization of a small vertical-axis wind turbine could be successfully accomplished.
基金supported by the Key R&D Plan of Shandong Province(Major Science and Technology Innovation Project)No.2023CXGC0107012024 City-University Integrated Development Strategic Engineering Project No.JNSX2024066.
文摘With the increasing deployment of Unmanned Aerial Vehicle-Hangar(UAV-H)clusters in dynamic environments such as disaster response and precision agriculture,existing networking schemes often struggle with adaptability to complex scenarios,while traditional Vertical Handoff(VHO)algorithms fail to fully address the unique challenges of UAV-H systems,including high-speed mobility and limited computational resources.To bridge this gap,this paper proposes a heterogeneous network architecture integrating 5th Generation Mobile Communication Technology(5G)cellular networks and self-organizing mesh networks for UAV-H clusters,accompanied by a novel VHO algorithm.The proposed algorithm leverages Multi-Attribute Decision-Making(MADM)theory combined with Genetic Algorithm(GA)optimization,incorporating edge computing to enable real-time decision-making and offload computational tasks efficiently.By constructing a utility function through attribute and weight matrices,the algorithm ensures UAV-H clusters dynamically select the optimal network access with the highest utility value.Simulation results demonstrate that the proposed method reduces network handoff times by 26.13%compared to the Decision Tree VHO(DT-VHO),effectively mitigating the ping-pong effect,and enhancing total system throughput by 19.99%under the same conditions.In terms of handoff delay,it outperforms the Artificial Neural Network VHO(ANN-VHO),significantly improving the Quality of Service(QoS).Finally,real-world hardware platform experiments validate the algorithm’s feasibility and superior performance in practical UAV-H cluster operations.This work provides a robust solution for seamless network connectivity in high-mobility UAV clusters,offering critical support for emerging applications requiring reliable and efficient wireless communication.
基金The project supported by the Key Project5 of National Natural Science Foundation of China under Grant No 70431002, and National Natural Science Foundation of China under Grant Nos. 70371068 and 10247005
文摘Based on the model of the same degree of all nodes we proposed before, a new algorithm, the so-called “spread all over vertices” （SAV） algorithm, is proposed for generating small-world properties from a regular ring lattices. During randomly rewiring connections the SAV is used to keep the unchanged number of links. Comparing the SAV algorithm with the Watts-Strogatz model and the “spread all over boundaries” algorithm, three methods can have the same topological properties of the small world networks. These results offer diverse formation of small world networks. It is helpful to the research of some applications for dynamics of mutual oscillator inside nodes and interacting automata associated with networks.
