Molten iron temperature as well as Si, P, and S contents is the most essential molten iron quality （MIQ） indices in the blast furnace （BF） ironmaking, which requires strict monitoring during the whole ironmaking p...Molten iron temperature as well as Si, P, and S contents is the most essential molten iron quality （MIQ） indices in the blast furnace （BF） ironmaking, which requires strict monitoring during the whole ironmaking production. However, these MIQ parameters are difficult to be directly measured online, and large-time delay exists in off-line analysis through laboratory sampling. Focusing on the practical challenge, a data-driven modeling method was presented for the prediction of MIQ using the improved muhivariable incremental random vector functional-link net- works （M-I-RVFLNs）. Compared with the conventional random vector functional-link networks （RVFLNs） and the online sequential RVFLNs, the M-I-RVFLNs have solved the problem of deciding the optimal number of hidden nodes and overcome the overfitting problems. Moreover, the proposed M I RVFLNs model has exhibited the potential for multivariable prediction of the MIQ and improved the terminal condition for the multiple-input multiple-out- put （MIMO） dynamic system, which is suitable for the BF ironmaking process in practice. Ultimately, industrial experiments and contrastive researches have been conducted on the BF No. 2 in Liuzhou Iron and Steel Group Co. Ltd. of China using the proposed method, and the results demonstrate that the established model produces better estima ting accuracy than other MIQ modeling methods.展开更多
In the contemporary era, the proliferation of information technology has led to an unprecedented surge in data generation, with this data being dispersed across a multitude of mobile devices. Facing these situations a...In the contemporary era, the proliferation of information technology has led to an unprecedented surge in data generation, with this data being dispersed across a multitude of mobile devices. Facing these situations and the training of deep learning model that needs great computing power support, the distributed algorithm that can carry out multi-party joint modeling has attracted everyone’s attention. The distributed training mode relieves the huge pressure of centralized model on computer computing power and communication. However, most distributed algorithms currently work in a master-slave mode, often including a central server for coordination, which to some extent will cause communication pressure, data leakage, privacy violations and other issues. To solve these problems, a decentralized fully distributed algorithm based on deep random weight neural network is proposed. The algorithm decomposes the original objective function into several sub-problems under consistency constraints, combines the decentralized average consensus (DAC) and alternating direction method of multipliers (ADMM), and achieves the goal of joint modeling and training through local calculation and communication of each node. Finally, we compare the proposed decentralized algorithm with several centralized deep neural networks with random weights, and experimental results demonstrate the effectiveness of the proposed algorithm.展开更多
We develop a high resolution ground penetrating radar system （LANRCS-GPR） based on the E5071B Vector Network Analyzer （VNA）. This system takes advantage of a wideband and adjustable frequency domain ground penetra...We develop a high resolution ground penetrating radar system （LANRCS-GPR） based on the E5071B Vector Network Analyzer （VNA）. This system takes advantage of a wideband and adjustable frequency domain ground penetrating radar system and adds the characteristics of a network analyzer with ultra-wideband and high precision measurement. It adopts the LAN mode to concatenate system control that reduces construction cost and makes the system easy to expand. The high resolution ground penetrating radar system carries out real time imaging using F-K migration with high calculation efficiency. The experiment results of the system indicate that the LANRCS-GPR system provides high resolution and precision, high signal-to-noise ratio, and great dynamic range. Furthermore, the LANRCS-GPR system is flexible and reliable to operate with easy to expand system functions. The research and development of the LANRCS-GPR provide the theoretical and experimental foundation for future frequency domain ground penetrating radar production and also can serve as an experimental platform with high data gathering precision, enormous information capability, wide application, and convenient operation for electromagnetic wave research and electromagnetic exploration.展开更多
In this paper, a support vector machine-based multi-model predictive control is proposed, in which SVM classification combines well with SVM regression. At first, each working environment is modeled by SVM regression ...In this paper, a support vector machine-based multi-model predictive control is proposed, in which SVM classification combines well with SVM regression. At first, each working environment is modeled by SVM regression and the support vector machine network-based model predictive control （SVMN-MPC） algorithm corresponding to each environment is developed, and then a multi-class SVM model is established to recognize multiple operating conditions. As for control, the current environment is identified by the multi-class SVM model and then the corresponding SVMN-MPC controller is activated at each sampling instant. The proposed modeling, switching and controller design is demonstrated in simulation results.展开更多
Direct online measurement on product quality of industrial processes is difficult to be realized,which leads to a large number of unlabeled samples in modeling data.Therefore,it needs to employ semi-supervised learnin...Direct online measurement on product quality of industrial processes is difficult to be realized,which leads to a large number of unlabeled samples in modeling data.Therefore,it needs to employ semi-supervised learning(SSL)method to establish the soft sensor model of product quality.Considering the slow time-varying characteristic of industrial processes,the model parameters should be updated smoothly.According to this characteristic,this paper proposes an online adaptive semi-supervised learning algorithm based on random vector functional link network(RVFLN),denoted as OAS-RVFLN.By introducing a L2-fusion term that can be seen a weight deviation constraint,the proposed algorithm unifies the offline and online learning,and achieves smoothness of model parameter update.Empirical evaluations both on benchmark testing functions and datasets reveal that the proposed OAS-RVFLN can outperform the conventional methods in learning speed and accuracy.Finally,the OAS-RVFLN is applied to the coal dense medium separation process in coal industry to estimate the ash content of coal product,which further verifies its effectiveness and potential of industrial application.展开更多
Random vector functional ink(RVFL)networks belong to a class of single hidden layer neural networks in which some parameters are randomly selected.Their network structure in which contains the direct links between inp...Random vector functional ink(RVFL)networks belong to a class of single hidden layer neural networks in which some parameters are randomly selected.Their network structure in which contains the direct links between inputs and outputs is unique,and stability analysis and real-time performance are two difficulties of the control systems based on neural networks.In this paper,combining the advantages of RVFL and the ideas of online sequential extreme learning machine(OS-ELM)and initial-training-free online extreme learning machine(ITFOELM),a novel online learning algorithm which is named as initial-training-free online random vector functional link algo rithm(ITF-ORVFL)is investigated for training RVFL.The link vector of RVFL network can be analytically determined based on sequentially arriving data by ITF-ORVFL with a high learning speed,and the stability for nonlinear systems based on this learning algorithm is analyzed.The experiment results indicate that the proposed ITF-ORVFL is effective in coping with nonparametric uncertainty.展开更多
Of growing amount of food waste, the integrated food waste and waste water treatment was regarded as one of the efficient modeling method. However, the load of food waste to the conventional waste treatment process mi...Of growing amount of food waste, the integrated food waste and waste water treatment was regarded as one of the efficient modeling method. However, the load of food waste to the conventional waste treatment process might lead to the high concentration of total nitrogen（T-N） impact on the effluent water quality. The objective of this study is to establish two machine learning models-artificial neural networks（ANNs） and support vector machines（SVMs）, in order to predict 1-day interval T-N concentration of effluent from a wastewater treatment plant in Ulsan, Korea. Daily water quality data and meteorological data were used and the performance of both models was evaluated in terms of the coefficient of determination（R^2）, Nash-Sutcliff efficiency（NSE）, relative efficiency criteria（d rel）. Additionally, Latin-Hypercube one-factor-at-a-time（LH-OAT） and a pattern search algorithm were applied to sensitivity analysis and model parameter optimization, respectively. Results showed that both models could be effectively applied to the 1-day interval prediction of T-N concentration of effluent. SVM model showed a higher prediction accuracy in the training stage and similar result in the validation stage.However, the sensitivity analysis demonstrated that the ANN model was a superior model for 1-day interval T-N concentration prediction in terms of the cause-and-effect relationship between T-N concentration and modeling input values to integrated food waste and waste water treatment. This study suggested the efficient and robust nonlinear time-series modeling method for an early prediction of the water quality of integrated food waste and waste water treatment process.展开更多
This paper presents a nonlinear model predictive control(NMPC) approach based on support vector machine(SVM) and genetic algorithm(GA) for multiple-input multiple-output(MIMO) nonlinear systems.Individual SVM is used ...This paper presents a nonlinear model predictive control(NMPC) approach based on support vector machine(SVM) and genetic algorithm(GA) for multiple-input multiple-output(MIMO) nonlinear systems.Individual SVM is used to approximate each output of the controlled plant Then the model is used in MPC control scheme to predict the outputs of the controlled plant.The optimal control sequence is calculated using GA with elite preserve strategy.Simulation results of a typical MIMO nonlinear system show that this method has a good ability of set points tracking and disturbance rejection.展开更多
In this paper, dielectric measurements were carried out to obtain conductivity, permittivity (real and imaginary parts) and loss tangent of Dead Sea water. These dielectric properties were measured using two different...In this paper, dielectric measurements were carried out to obtain conductivity, permittivity (real and imaginary parts) and loss tangent of Dead Sea water. These dielectric properties were measured using two different methods: Vector Network Analyzer “VNA” (Dielectric Assessment Kit “DAK”) and Four Probe method, all measurements taken at room temperature (25<span style="font-size:12px;white-space:nowrap;">˚</span>C). The collected data has been analyzed in the frequency range (200 MHz - 9 GHz), by making a comparison between the measured data for Dead Sea water and distilled water, the results have shown that a huge difference in dielectric properties for the two samples. The conductivity of Dead Sea water is much larger than the conductivity of distilled water, which has been expected because of the fact of the high salinity of Dead Sea water.展开更多
Electroencephalography(EEG),helps to analyze the neuronal activity of a human brain in the form of electrical signals with high temporal resolution in the millisecond range.To extract clean clinical information from E...Electroencephalography(EEG),helps to analyze the neuronal activity of a human brain in the form of electrical signals with high temporal resolution in the millisecond range.To extract clean clinical information from EEG signals,it is essential to remove unwanted artifacts that are due to different causes including at the time of acquisition.In this piece of work,the authors considered the EEG signal contaminated with Electrocardiogram(ECG)artifacts that occurs mostly in cardiac patients.The clean EEG is taken from the openly available Mendeley database whereas the ECG signal is collected from the Physionet database to create artifacts in the EEG signal and verify the proposed algorithm.Being the artifactual signal is non-linear and non-stationary the Random Vector Functional Link Network(RVFLN)model is used in this case.The Machine Learning approach has taken a leading role in every field of current research and RVFLN is one of them.For the proof of adaptive nature,the model is designed with EEG as a reference and artifactual EEG as input.The peaks of ECG signals are evaluated for artifact estimation as the amplitude is higher than the EEG signal.To vary the weight and reduce the error,an exponentially weighted Recursive Least Square(RLS)algorithm is used to design the adaptive filter with the novel RVFLN model.The random vectors are considered in this model with a radial basis function to satisfy the required signal experimentation.It is found that the result is excellent in terms of Mean Square Error(MSE),Normalized Mean Square Error(NMSE),Relative Error(RE),Gain in Signal to Artifact Ratio(GSAR),Signal Noise Ratio(SNR),Information Quantity(IQ),and Improvement in Normalized Power Spectrum(INPS).Also,the proposed method is compared with the earlier methods to show its efficacy.展开更多
Flame detection is a research hotspot in industrial production,and it has been widely used in various fields.Based on the ignition and combustion video sequence,this paper aims to improve the accuracy and unintuitive ...Flame detection is a research hotspot in industrial production,and it has been widely used in various fields.Based on the ignition and combustion video sequence,this paper aims to improve the accuracy and unintuitive detection results of the current flame detection methods of gasifier and industrial boiler.A furnace flame detection model based on support vector machine convolutional neural network(SCNN)is proposed.This algorithm uses the advantages of neural networks in the field of image classification to process flame burning video sequences which needs detailed analysis.Firstly,the support vector machine(SVM)with better small sample classification effect is used to replace the Softmax classification layer of the convolutional neural network(CNN)network.Secondly,a Dropout layer is introduced to improve the generalization ability of the network.Subsequently,the area,frequency and other important parameters of the flame image are analyzed and processed.Eventually,the experimental results show that the flame detection model designed in this paper is more accurate than the CNN model,and the accuracy of the judgment on the flame data set collected in the gasifier furnace reaches 99.53%.After several ignition tests,the furnace flame of the gasifier can be detected in real time.展开更多
Various methods of tyre modelling are implemented from pure theoretical to empirical or semi-empirical models based on experimental results. A new way of representing tyre data obtained from measurements is presented ...Various methods of tyre modelling are implemented from pure theoretical to empirical or semi-empirical models based on experimental results. A new way of representing tyre data obtained from measurements is presented via support vector machines （SVMs）. The feasibility of applying SVMs to steady-state tyre modelling is investigated by comparison with three-layer backpropagation （BP） neural network at pure slip and combined slip. The results indicate SVMs outperform the BP neural network in modelling the tyre characteristics with better generalization performance. The SVMsqyre is implemented in 8-DOF vehicle model for vehicle dynamics simulation by means of the PAC 2002 Magic Formula as reference. The SVMs-tyre can be a competitive and accurate method to model a tyre for vehicle dynamics simuLation.展开更多
To make full use of the gas resource, stabilize the pipe network pressure, and obtain higher economic benefits in the iron and steel industry, the surplus gas prediction and scheduling models were proposed. Before app...To make full use of the gas resource, stabilize the pipe network pressure, and obtain higher economic benefits in the iron and steel industry, the surplus gas prediction and scheduling models were proposed. Before applying the forecasting techniques, a support vector classifier was first used to classify the data, and then the filtering was used to create separate trend and volatility sequences. After forecasting, the Markov chain transition probability matrix was introduced to adjust the residual. Simulation results using surplus gas data from an iron and steel enterprise demonstrate that the constructed SVC-HP-ENN-LSSVM-MC prediction model prediction is accurate, and that the classification accuracy is high under different conditions. Based on this, the scheduling model was constructed for surplus gas operating, and it has been used to investigate the comprehensive measures for managing the operational probabilistic risk and optimize the economic benefit at various working conditions and implementations. It has extended the concepts of traditional surplus gas dispatching systems, and provides a method for enterprises to determine optimal schedules.展开更多
Nowadays in the medicalfield,imaging techniques such as Optical Coherence Tomography(OCT)are mainly used to identify retinal diseases.In this paper,the Central Serous Chorio Retinopathy(CSCR)image is analyzed for vari...Nowadays in the medicalfield,imaging techniques such as Optical Coherence Tomography(OCT)are mainly used to identify retinal diseases.In this paper,the Central Serous Chorio Retinopathy(CSCR)image is analyzed for various stages and then compares the difference between CSCR before as well as after treatment using different application methods.Thefirst approach,which was focused on image quality,improves medical image accuracy.An enhancement algorithm was implemented to improve the OCT image contrast and denoise purpose called Boosted Anisotropic Diffusion with an Unsharp Masking Filter(BADWUMF).The classifier used here is tofigure out whether the OCT image is a CSCR case or not.150 images are checked for this research work(75 abnormal from Optical Coherence Tomography Image Retinal Database,in-house clinical database,and 75 normal images).This article explicitly decides that the approaches suggested aid the ophthalmologist with the precise retinal analysis and hence the risk factors to be minimized.The total precision is 90 percent obtained from the Two Class Support Vector Machine(TCSVM)classifier and 93.3 percent is obtained from Shallow Neural Network with the Powell-Beale(SNNWPB)classifier using the MATLAB 2019a program.展开更多
The paper deals with a new VQ+DPCM+DCT algorithm based on Self-Organizing Feature Maps(SOFM) algorithm for image coding. In addition. a Frequency sensitive SOFM (FSOFM) has been also devel-oped. Simulation results sh...The paper deals with a new VQ+DPCM+DCT algorithm based on Self-Organizing Feature Maps(SOFM) algorithm for image coding. In addition. a Frequency sensitive SOFM (FSOFM) has been also devel-oped. Simulation results show that a very good visual quality of the coded image at 0.252 bits/pixel is obtained.展开更多
As a simple,fast,and non-destructive measuring technology,dielectric spectroscopy is usually used to analyze the dielectric properties of agricultural products and food,and then to predict the main components of mater...As a simple,fast,and non-destructive measuring technology,dielectric spectroscopy is usually used to analyze the dielectric properties of agricultural products and food,and then to predict the main components of materials.However,the large and expensive vector network analyzers(VNA)with expensive analysis software applied in measuring dielectric properties make research limited to the laboratory.To acquire dielectric spectra in situ,a model for solving relative complex permittivity was derived,and its performance was validated.Then,a low-cost portable dielectric spectrometer with a mini VNA,a Raspberry Pi,and a coaxial probe as core parts was developed over the frequency range of 100-3000 MHz.The stability and accuracy of the developed spectrometer were tested using milk and juice.The results indicated that the relative errors of the model were within±5%for dielectric constant(ε′)and loss factor(ε″).The coefficients of variation of measuredε′andε″by the developed spectrometer at 100-3000 MHz were less than 1%and 2%,respectively.Compared with the dielectric properties obtained by using a commercial dielectric measurement system,the relative errors of measuredε′andε″were within±3.4%and±6.0%,respectively.This study makes fast,non-destructive,and on-site food quality detection using dielectric spectra possible.展开更多
Forecasting wind speed is an extremely complicated and challenging problem due to its chaotic nature and its dependence on several atmospheric conditions.Although there are several intelligent techniques in the litera...Forecasting wind speed is an extremely complicated and challenging problem due to its chaotic nature and its dependence on several atmospheric conditions.Although there are several intelligent techniques in the literature for wind speed prediction,their accuracies are not yet very reliable.Therefore,in this paper,a new hybrid intelligent technique named the deep mixed kernel random vector functional-link network auto-encoder(AE)is proposed for wind speed prediction.The proposed method eliminates manual tuning of hidden nodes with random weights and biases,providing prediction model generalization and representation learning.This reduces reconstruction error due to the exact inversion of the kernel matrix,unlike the pseudo-inverse in a random vector functional-link network,and short-ens the execution time.Furthermore,the presence of a direct link from the input to the output reduces the complexity of the prediction model and improves the prediction accuracy.The kernel parameters and coefficients of the mixed kernel system are optimized using a new chaotic sine–cosine Levy flight optimization technique.The lowest errors in terms of mean absolute error(0.4139),mean absolute percentage error(4.0081),root mean square error(0.4843),standard deviation error(1.1431)and index of agreement(0.9733)prove the efficiency of the proposed model in comparison with other deep learning models such as deep AEs,deep kernel extreme learning ma-chine AEs,deep kernel random vector functional-link network AEs,benchmark models such as least square support vector machine,autoregressive integrated moving average,extreme learning machines and their hybrid models along with different state-of-the-art methods.展开更多
The optical Vernier effect has garnered significant research attention and found widespread applications in enhancing the measurement sensitivity of optical fiber interferometric sensors.Typically,Vernier sensor inter...The optical Vernier effect has garnered significant research attention and found widespread applications in enhancing the measurement sensitivity of optical fiber interferometric sensors.Typically,Vernier sensor interrogation involves measuring its optical spectrum across a wide wavelength range using a high-precision spectrometer.This process is further complicated by the intricate signal processing required for accurately extracting the Vernier envelope,which can inadvertently introduce errors that compromise sensing performance.In this work,we introduce a novel approach to interrogating Vernier sensors based on a coherent microwave interferenceassisted measurement technique.Instead of measuring the optical spectrum,we acquire the frequency response of the Vernier optical fiber sensor using a vector network analyzer.This response includes a characteristic notch that is highly sensitive to external perturbations.We discuss in detail the underlying physics of coherent microwave interference-based notch generation and the sensing principle.As a proof of concept,we construct a Vernier sensor using two air-gap Fabry–Perot interferometers arranged in parallel,demonstrating high-sensitivity strain sensing through microwave-domain measurements.The introduced technique is straightforward to implement,and the characteristic sensing signal is easy to demodulate and highly sensitive,presenting an excellent solution to the complexities of existing optical Vernier sensor systems.展开更多
Microwave photonics （MWP） is an interdisci- plinary field that combines two different areas of microwave engineering and photonics. It has several key features by transferring signals between the optical domain and ...Microwave photonics （MWP） is an interdisci- plinary field that combines two different areas of microwave engineering and photonics. It has several key features by transferring signals between the optical domain and microwave domain, which leads to the advantages of broad operation bandwidth for generation, processing and distribution of microwave signals and high resolution for optical spectrum measurement. In this paper, we comprehensively review past and current status of MWP in China by introducing the representative works from most of the active MWP research groups. Future prospective is also discussed fi＇om the national strategy to key enabling technology that we have developed.展开更多
The motivation for this study was to investigate the representative volume element （RVE） needed to correlate the nondestructive electromagnetic （EM） measurements with the con- ventional destructive asphalt pavemen...The motivation for this study was to investigate the representative volume element （RVE） needed to correlate the nondestructive electromagnetic （EM） measurements with the con- ventional destructive asphalt pavement quality control measurements. A large pavement rehabilitation contract was used as the test site for the experiment. Pavement cores were drilled from the same locations where the stationary and continuous Ground Penetrating Radar （GPR） measurements were obtained. Laboratory measurements included testing the bulk density of cores using two methods, the surface-saturated dry method and determining bulk density by dimensions. Also, Vector Network Analyzer （VNA） and the through specimen transmission configuration were employed at microwave frequencies to measure the reference dielectric constant of cores using two different footprint areas and therefore vol- ume elements. The RVE for EM measurements turns out to be frequency dependent; therefore in addition to being dependent on asphalt mixture type and method of obtaining bulk density, it is dependent on the resolution of the EM method used. Then, although the average bulk property results agreed with theoretical formulations of higher core air void content giving a lower dielectric constant, for the individual cores there was no correlation for the VNA measurements because the volume element seizes deviated. Similarly, GPR technique was unable to capture the spatial variation of pavement air voids measured from the 150-mm drill cores. More research is needed to determine the usable RVE for asphalt.展开更多
基金Item Sponsored by National Natural Science Foundation of China(61290323,61333007,61473064)Fundamental Research Funds for Central Universities of China(N130108001)+1 种基金National High Technology Research and Development Program of China(2015AA043802)General Project on Scientific Research for Education Department of Liaoning Province of China(L20150186)
文摘Molten iron temperature as well as Si, P, and S contents is the most essential molten iron quality （MIQ） indices in the blast furnace （BF） ironmaking, which requires strict monitoring during the whole ironmaking production. However, these MIQ parameters are difficult to be directly measured online, and large-time delay exists in off-line analysis through laboratory sampling. Focusing on the practical challenge, a data-driven modeling method was presented for the prediction of MIQ using the improved muhivariable incremental random vector functional-link net- works （M-I-RVFLNs）. Compared with the conventional random vector functional-link networks （RVFLNs） and the online sequential RVFLNs, the M-I-RVFLNs have solved the problem of deciding the optimal number of hidden nodes and overcome the overfitting problems. Moreover, the proposed M I RVFLNs model has exhibited the potential for multivariable prediction of the MIQ and improved the terminal condition for the multiple-input multiple-out- put （MIMO） dynamic system, which is suitable for the BF ironmaking process in practice. Ultimately, industrial experiments and contrastive researches have been conducted on the BF No. 2 in Liuzhou Iron and Steel Group Co. Ltd. of China using the proposed method, and the results demonstrate that the established model produces better estima ting accuracy than other MIQ modeling methods.
文摘In the contemporary era, the proliferation of information technology has led to an unprecedented surge in data generation, with this data being dispersed across a multitude of mobile devices. Facing these situations and the training of deep learning model that needs great computing power support, the distributed algorithm that can carry out multi-party joint modeling has attracted everyone’s attention. The distributed training mode relieves the huge pressure of centralized model on computer computing power and communication. However, most distributed algorithms currently work in a master-slave mode, often including a central server for coordination, which to some extent will cause communication pressure, data leakage, privacy violations and other issues. To solve these problems, a decentralized fully distributed algorithm based on deep random weight neural network is proposed. The algorithm decomposes the original objective function into several sub-problems under consistency constraints, combines the decentralized average consensus (DAC) and alternating direction method of multipliers (ADMM), and achieves the goal of joint modeling and training through local calculation and communication of each node. Finally, we compare the proposed decentralized algorithm with several centralized deep neural networks with random weights, and experimental results demonstrate the effectiveness of the proposed algorithm.
基金This project was supported by National Natural Science Foundation of china (No.40474042)
文摘We develop a high resolution ground penetrating radar system （LANRCS-GPR） based on the E5071B Vector Network Analyzer （VNA）. This system takes advantage of a wideband and adjustable frequency domain ground penetrating radar system and adds the characteristics of a network analyzer with ultra-wideband and high precision measurement. It adopts the LAN mode to concatenate system control that reduces construction cost and makes the system easy to expand. The high resolution ground penetrating radar system carries out real time imaging using F-K migration with high calculation efficiency. The experiment results of the system indicate that the LANRCS-GPR system provides high resolution and precision, high signal-to-noise ratio, and great dynamic range. Furthermore, the LANRCS-GPR system is flexible and reliable to operate with easy to expand system functions. The research and development of the LANRCS-GPR provide the theoretical and experimental foundation for future frequency domain ground penetrating radar production and also can serve as an experimental platform with high data gathering precision, enormous information capability, wide application, and convenient operation for electromagnetic wave research and electromagnetic exploration.
基金the 973 Program of China (No.2002CB312200)the National Science Foundation of China (No.60574019)
文摘In this paper, a support vector machine-based multi-model predictive control is proposed, in which SVM classification combines well with SVM regression. At first, each working environment is modeled by SVM regression and the support vector machine network-based model predictive control （SVMN-MPC） algorithm corresponding to each environment is developed, and then a multi-class SVM model is established to recognize multiple operating conditions. As for control, the current environment is identified by the multi-class SVM model and then the corresponding SVMN-MPC controller is activated at each sampling instant. The proposed modeling, switching and controller design is demonstrated in simulation results.
基金Projects(61603393,61973306)supported in part by the National Natural Science Foundation of ChinaProject(BK20160275)supported by the Natural Science Foundation of Jiangsu Province,China+1 种基金Projects(2015M581885,2018T110571)supported by the Postdoctoral Science Foundation of ChinaProject(PAL-N201706)supported by the Open Project Foundation of State Key Laboratory of Synthetical Automation for Process Industries of Northeastern University,China
文摘Direct online measurement on product quality of industrial processes is difficult to be realized,which leads to a large number of unlabeled samples in modeling data.Therefore,it needs to employ semi-supervised learning(SSL)method to establish the soft sensor model of product quality.Considering the slow time-varying characteristic of industrial processes,the model parameters should be updated smoothly.According to this characteristic,this paper proposes an online adaptive semi-supervised learning algorithm based on random vector functional link network(RVFLN),denoted as OAS-RVFLN.By introducing a L2-fusion term that can be seen a weight deviation constraint,the proposed algorithm unifies the offline and online learning,and achieves smoothness of model parameter update.Empirical evaluations both on benchmark testing functions and datasets reveal that the proposed OAS-RVFLN can outperform the conventional methods in learning speed and accuracy.Finally,the OAS-RVFLN is applied to the coal dense medium separation process in coal industry to estimate the ash content of coal product,which further verifies its effectiveness and potential of industrial application.
基金supported by the Ministry of Science and Technology of China(2018AAA0101000,2017YFF0205306,WQ20141100198)the National Natural Science Foundation of China(91648117)。
文摘Random vector functional ink(RVFL)networks belong to a class of single hidden layer neural networks in which some parameters are randomly selected.Their network structure in which contains the direct links between inputs and outputs is unique,and stability analysis and real-time performance are two difficulties of the control systems based on neural networks.In this paper,combining the advantages of RVFL and the ideas of online sequential extreme learning machine(OS-ELM)and initial-training-free online extreme learning machine(ITFOELM),a novel online learning algorithm which is named as initial-training-free online random vector functional link algo rithm(ITF-ORVFL)is investigated for training RVFL.The link vector of RVFL network can be analytically determined based on sequentially arriving data by ITF-ORVFL with a high learning speed,and the stability for nonlinear systems based on this learning algorithm is analyzed.The experiment results indicate that the proposed ITF-ORVFL is effective in coping with nonparametric uncertainty.
基金supported by a grant (12-TI-C04) from Advanced Water Management Research Program funded by Ministry of Land, Infrastructure and Transport of Korean government
文摘Of growing amount of food waste, the integrated food waste and waste water treatment was regarded as one of the efficient modeling method. However, the load of food waste to the conventional waste treatment process might lead to the high concentration of total nitrogen（T-N） impact on the effluent water quality. The objective of this study is to establish two machine learning models-artificial neural networks（ANNs） and support vector machines（SVMs）, in order to predict 1-day interval T-N concentration of effluent from a wastewater treatment plant in Ulsan, Korea. Daily water quality data and meteorological data were used and the performance of both models was evaluated in terms of the coefficient of determination（R^2）, Nash-Sutcliff efficiency（NSE）, relative efficiency criteria（d rel）. Additionally, Latin-Hypercube one-factor-at-a-time（LH-OAT） and a pattern search algorithm were applied to sensitivity analysis and model parameter optimization, respectively. Results showed that both models could be effectively applied to the 1-day interval prediction of T-N concentration of effluent. SVM model showed a higher prediction accuracy in the training stage and similar result in the validation stage.However, the sensitivity analysis demonstrated that the ANN model was a superior model for 1-day interval T-N concentration prediction in terms of the cause-and-effect relationship between T-N concentration and modeling input values to integrated food waste and waste water treatment. This study suggested the efficient and robust nonlinear time-series modeling method for an early prediction of the water quality of integrated food waste and waste water treatment process.
基金Supported by the National Natural Science Foundation of China(21076179)the National Basic Research Program of China(2012CB720500)
文摘This paper presents a nonlinear model predictive control(NMPC) approach based on support vector machine(SVM) and genetic algorithm(GA) for multiple-input multiple-output(MIMO) nonlinear systems.Individual SVM is used to approximate each output of the controlled plant Then the model is used in MPC control scheme to predict the outputs of the controlled plant.The optimal control sequence is calculated using GA with elite preserve strategy.Simulation results of a typical MIMO nonlinear system show that this method has a good ability of set points tracking and disturbance rejection.
文摘In this paper, dielectric measurements were carried out to obtain conductivity, permittivity (real and imaginary parts) and loss tangent of Dead Sea water. These dielectric properties were measured using two different methods: Vector Network Analyzer “VNA” (Dielectric Assessment Kit “DAK”) and Four Probe method, all measurements taken at room temperature (25<span style="font-size:12px;white-space:nowrap;">˚</span>C). The collected data has been analyzed in the frequency range (200 MHz - 9 GHz), by making a comparison between the measured data for Dead Sea water and distilled water, the results have shown that a huge difference in dielectric properties for the two samples. The conductivity of Dead Sea water is much larger than the conductivity of distilled water, which has been expected because of the fact of the high salinity of Dead Sea water.
文摘Electroencephalography(EEG),helps to analyze the neuronal activity of a human brain in the form of electrical signals with high temporal resolution in the millisecond range.To extract clean clinical information from EEG signals,it is essential to remove unwanted artifacts that are due to different causes including at the time of acquisition.In this piece of work,the authors considered the EEG signal contaminated with Electrocardiogram(ECG)artifacts that occurs mostly in cardiac patients.The clean EEG is taken from the openly available Mendeley database whereas the ECG signal is collected from the Physionet database to create artifacts in the EEG signal and verify the proposed algorithm.Being the artifactual signal is non-linear and non-stationary the Random Vector Functional Link Network(RVFLN)model is used in this case.The Machine Learning approach has taken a leading role in every field of current research and RVFLN is one of them.For the proof of adaptive nature,the model is designed with EEG as a reference and artifactual EEG as input.The peaks of ECG signals are evaluated for artifact estimation as the amplitude is higher than the EEG signal.To vary the weight and reduce the error,an exponentially weighted Recursive Least Square(RLS)algorithm is used to design the adaptive filter with the novel RVFLN model.The random vectors are considered in this model with a radial basis function to satisfy the required signal experimentation.It is found that the result is excellent in terms of Mean Square Error(MSE),Normalized Mean Square Error(NMSE),Relative Error(RE),Gain in Signal to Artifact Ratio(GSAR),Signal Noise Ratio(SNR),Information Quantity(IQ),and Improvement in Normalized Power Spectrum(INPS).Also,the proposed method is compared with the earlier methods to show its efficacy.
基金Supported by Shaanxi Province Key Research and Development Project(No.2021GY-280)Shaanxi Province Natural Science Basic ResearchProgram Project(No.2021JM-459)National Natural Science Foundation of China(No.61834005,61772417,61802304,61602377,61634004)。
文摘Flame detection is a research hotspot in industrial production,and it has been widely used in various fields.Based on the ignition and combustion video sequence,this paper aims to improve the accuracy and unintuitive detection results of the current flame detection methods of gasifier and industrial boiler.A furnace flame detection model based on support vector machine convolutional neural network(SCNN)is proposed.This algorithm uses the advantages of neural networks in the field of image classification to process flame burning video sequences which needs detailed analysis.Firstly,the support vector machine(SVM)with better small sample classification effect is used to replace the Softmax classification layer of the convolutional neural network(CNN)network.Secondly,a Dropout layer is introduced to improve the generalization ability of the network.Subsequently,the area,frequency and other important parameters of the flame image are analyzed and processed.Eventually,the experimental results show that the flame detection model designed in this paper is more accurate than the CNN model,and the accuracy of the judgment on the flame data set collected in the gasifier furnace reaches 99.53%.After several ignition tests,the furnace flame of the gasifier can be detected in real time.
基金This project is supported by Shanghai Automobile Industry Corporation Technology Foundation, China(No.0224).
文摘Various methods of tyre modelling are implemented from pure theoretical to empirical or semi-empirical models based on experimental results. A new way of representing tyre data obtained from measurements is presented via support vector machines （SVMs）. The feasibility of applying SVMs to steady-state tyre modelling is investigated by comparison with three-layer backpropagation （BP） neural network at pure slip and combined slip. The results indicate SVMs outperform the BP neural network in modelling the tyre characteristics with better generalization performance. The SVMsqyre is implemented in 8-DOF vehicle model for vehicle dynamics simulation by means of the PAC 2002 Magic Formula as reference. The SVMs-tyre can be a competitive and accurate method to model a tyre for vehicle dynamics simuLation.
基金Project(51204082)supported by the National Natural Science Foundation of ChinaProject(KKSY201458118)supported by the Talent Cultivation Project of Kuning University of Science and Technology,China
文摘To make full use of the gas resource, stabilize the pipe network pressure, and obtain higher economic benefits in the iron and steel industry, the surplus gas prediction and scheduling models were proposed. Before applying the forecasting techniques, a support vector classifier was first used to classify the data, and then the filtering was used to create separate trend and volatility sequences. After forecasting, the Markov chain transition probability matrix was introduced to adjust the residual. Simulation results using surplus gas data from an iron and steel enterprise demonstrate that the constructed SVC-HP-ENN-LSSVM-MC prediction model prediction is accurate, and that the classification accuracy is high under different conditions. Based on this, the scheduling model was constructed for surplus gas operating, and it has been used to investigate the comprehensive measures for managing the operational probabilistic risk and optimize the economic benefit at various working conditions and implementations. It has extended the concepts of traditional surplus gas dispatching systems, and provides a method for enterprises to determine optimal schedules.
文摘Nowadays in the medicalfield,imaging techniques such as Optical Coherence Tomography(OCT)are mainly used to identify retinal diseases.In this paper,the Central Serous Chorio Retinopathy(CSCR)image is analyzed for various stages and then compares the difference between CSCR before as well as after treatment using different application methods.Thefirst approach,which was focused on image quality,improves medical image accuracy.An enhancement algorithm was implemented to improve the OCT image contrast and denoise purpose called Boosted Anisotropic Diffusion with an Unsharp Masking Filter(BADWUMF).The classifier used here is tofigure out whether the OCT image is a CSCR case or not.150 images are checked for this research work(75 abnormal from Optical Coherence Tomography Image Retinal Database,in-house clinical database,and 75 normal images).This article explicitly decides that the approaches suggested aid the ophthalmologist with the precise retinal analysis and hence the risk factors to be minimized.The total precision is 90 percent obtained from the Two Class Support Vector Machine(TCSVM)classifier and 93.3 percent is obtained from Shallow Neural Network with the Powell-Beale(SNNWPB)classifier using the MATLAB 2019a program.
文摘The paper deals with a new VQ+DPCM+DCT algorithm based on Self-Organizing Feature Maps(SOFM) algorithm for image coding. In addition. a Frequency sensitive SOFM (FSOFM) has been also devel-oped. Simulation results show that a very good visual quality of the coded image at 0.252 bits/pixel is obtained.
基金financial support provided by the National Natural Science Foundation of China(Grant No.32172308)Startup Foundation for Doctors of Yan'an University(No.YDBK2022-79).
文摘As a simple,fast,and non-destructive measuring technology,dielectric spectroscopy is usually used to analyze the dielectric properties of agricultural products and food,and then to predict the main components of materials.However,the large and expensive vector network analyzers(VNA)with expensive analysis software applied in measuring dielectric properties make research limited to the laboratory.To acquire dielectric spectra in situ,a model for solving relative complex permittivity was derived,and its performance was validated.Then,a low-cost portable dielectric spectrometer with a mini VNA,a Raspberry Pi,and a coaxial probe as core parts was developed over the frequency range of 100-3000 MHz.The stability and accuracy of the developed spectrometer were tested using milk and juice.The results indicated that the relative errors of the model were within±5%for dielectric constant(ε′)and loss factor(ε″).The coefficients of variation of measuredε′andε″by the developed spectrometer at 100-3000 MHz were less than 1%and 2%,respectively.Compared with the dielectric properties obtained by using a commercial dielectric measurement system,the relative errors of measuredε′andε″were within±3.4%and±6.0%,respectively.This study makes fast,non-destructive,and on-site food quality detection using dielectric spectra possible.
文摘Forecasting wind speed is an extremely complicated and challenging problem due to its chaotic nature and its dependence on several atmospheric conditions.Although there are several intelligent techniques in the literature for wind speed prediction,their accuracies are not yet very reliable.Therefore,in this paper,a new hybrid intelligent technique named the deep mixed kernel random vector functional-link network auto-encoder(AE)is proposed for wind speed prediction.The proposed method eliminates manual tuning of hidden nodes with random weights and biases,providing prediction model generalization and representation learning.This reduces reconstruction error due to the exact inversion of the kernel matrix,unlike the pseudo-inverse in a random vector functional-link network,and short-ens the execution time.Furthermore,the presence of a direct link from the input to the output reduces the complexity of the prediction model and improves the prediction accuracy.The kernel parameters and coefficients of the mixed kernel system are optimized using a new chaotic sine–cosine Levy flight optimization technique.The lowest errors in terms of mean absolute error(0.4139),mean absolute percentage error(4.0081),root mean square error(0.4843),standard deviation error(1.1431)and index of agreement(0.9733)prove the efficiency of the proposed model in comparison with other deep learning models such as deep AEs,deep kernel extreme learning ma-chine AEs,deep kernel random vector functional-link network AEs,benchmark models such as least square support vector machine,autoregressive integrated moving average,extreme learning machines and their hybrid models along with different state-of-the-art methods.
文摘The optical Vernier effect has garnered significant research attention and found widespread applications in enhancing the measurement sensitivity of optical fiber interferometric sensors.Typically,Vernier sensor interrogation involves measuring its optical spectrum across a wide wavelength range using a high-precision spectrometer.This process is further complicated by the intricate signal processing required for accurately extracting the Vernier envelope,which can inadvertently introduce errors that compromise sensing performance.In this work,we introduce a novel approach to interrogating Vernier sensors based on a coherent microwave interferenceassisted measurement technique.Instead of measuring the optical spectrum,we acquire the frequency response of the Vernier optical fiber sensor using a vector network analyzer.This response includes a characteristic notch that is highly sensitive to external perturbations.We discuss in detail the underlying physics of coherent microwave interference-based notch generation and the sensing principle.As a proof of concept,we construct a Vernier sensor using two air-gap Fabry–Perot interferometers arranged in parallel,demonstrating high-sensitivity strain sensing through microwave-domain measurements.The introduced technique is straightforward to implement,and the characteristic sensing signal is easy to demodulate and highly sensitive,presenting an excellent solution to the complexities of existing optical Vernier sensor systems.
基金We would like to thank all the colleagues who have been involved into these reported works in China and collaborated internationally. We would like to thank the supporting of the National High-Tech Research ＆ Development Program of China （Nos. 2011AA010303, 2013AA014201 and 2011AA010305） and the National Natural Science Foundation of China （Grant Nos, 61177080, 61377002, 61321063 and 61090391）. Ming Li was supported in part by the ＂Thousand Young Talent＂ program.
文摘Microwave photonics （MWP） is an interdisci- plinary field that combines two different areas of microwave engineering and photonics. It has several key features by transferring signals between the optical domain and microwave domain, which leads to the advantages of broad operation bandwidth for generation, processing and distribution of microwave signals and high resolution for optical spectrum measurement. In this paper, we comprehensively review past and current status of MWP in China by introducing the representative works from most of the active MWP research groups. Future prospective is also discussed fi＇om the national strategy to key enabling technology that we have developed.
基金funded by the Finnish Transport Administration (FTA)
文摘The motivation for this study was to investigate the representative volume element （RVE） needed to correlate the nondestructive electromagnetic （EM） measurements with the con- ventional destructive asphalt pavement quality control measurements. A large pavement rehabilitation contract was used as the test site for the experiment. Pavement cores were drilled from the same locations where the stationary and continuous Ground Penetrating Radar （GPR） measurements were obtained. Laboratory measurements included testing the bulk density of cores using two methods, the surface-saturated dry method and determining bulk density by dimensions. Also, Vector Network Analyzer （VNA） and the through specimen transmission configuration were employed at microwave frequencies to measure the reference dielectric constant of cores using two different footprint areas and therefore vol- ume elements. The RVE for EM measurements turns out to be frequency dependent; therefore in addition to being dependent on asphalt mixture type and method of obtaining bulk density, it is dependent on the resolution of the EM method used. Then, although the average bulk property results agreed with theoretical formulations of higher core air void content giving a lower dielectric constant, for the individual cores there was no correlation for the VNA measurements because the volume element seizes deviated. Similarly, GPR technique was unable to capture the spatial variation of pavement air voids measured from the 150-mm drill cores. More research is needed to determine the usable RVE for asphalt.
