Trailing-edge flap is traditionally used to improve the takeoff and landing aerodynamic performance of aircraft.In order to improve flight efficiency during takeoff,cruise and landing states,the flexible variable camb...Trailing-edge flap is traditionally used to improve the takeoff and landing aerodynamic performance of aircraft.In order to improve flight efficiency during takeoff,cruise and landing states,the flexible variable camber trailing-edge flap is introduced,capable of changing its shape smoothly from 50% flap chord to the rear of the flap.Using a numerical simulation method for the case of the GA（W）-2 airfoil,the multi-objective optimization of the overlap,gap,deflection angle,and bending angle of the flap under takeoff and landing configurations is studied.The optimization results show that under takeoff configuration,the variable camber trailing-edge flap can increase lift coefficient by about 8% and lift-to-drag ratio by about 7% compared with the traditional flap at a takeoff angle of 8°.Under landing configuration,the flap can improve the lift coefficient at a stall angle of attack about 1.3%.Under cruise state,the flap helps to improve the lift-todrag ratio over a wide range of lift coefficients,and the maximum increment is about 30%.Finally,a corrugated structure–eccentric beam combination bending mechanism is introduced in this paper to bend the flap by rotating the eccentric beam.展开更多
A variable camber wing driven by pneumatic artificial muscles is developed in this paper. Firstly, the experimental setup to measure the static output force of pneumatic artificial muscle is designed and the relations...A variable camber wing driven by pneumatic artificial muscles is developed in this paper. Firstly, the experimental setup to measure the static output force of pneumatic artificial muscle is designed and the relationship between the static output force and the air pressure is investigated. Experimental results show that the static output force of pneumatic artificial muscle decreases nonlinearly with the increase of contraction ratio. Secondly, the model of variable camber wing driven by pneumatic artificial muscles is manufactured to validate the variable camber concept. Finally, wind tunnel tests are conducted in the low speed wind tunnel. It is found that the wing camber increases with the increase of air pressure. When the air pressure of PAMs is 0.4 MPa and 0.5 MPa, the tip displacement of the trailing-edge is 3 mm and 5 mm, respectively. The lift of aerofoil with flexible trailing-edge increases by 87% at AOA of 5°.展开更多
Variable camber wing technology is one of the important development trends of green aviation at present.Through smooth,seamless,continuous and adaptive change of wing camber,the aerodynamic performance is improved in ...Variable camber wing technology is one of the important development trends of green aviation at present.Through smooth,seamless,continuous and adaptive change of wing camber,the aerodynamic performance is improved in achieving increase in lift and reduction in resistance and noise.Based on the aerodynamic validation model CAE-AVM,Chinese Aeronautical Establishment(CAE)has carried out the design and validation of a variable camber wing,proposed an aerodynamic deformation matrix for the leading and trailing edges of aircraft wings in takeoff,landing and cruise conditions.Various structures and driving schemes are compared,and several key technology problems of leading and trailing edge deformation are solved.A full-size leading edge wind tunnel test piece with a span of 2.7 m and a trailing edge ground function test piece are developed.The deformation and shape maintenance capabilities of the leading edge is verified under real wind load conditions,and the load bearing and deformation capabilities of the trailing edge is verified under simulated follow-on load.The results indicate that the leading and trailing edges of the variable camber wing can achieve the required deformation angle and have a certain load-bearing capacity.Our study can provide some insights into the application of variable camber wing technology for civil aircraft.展开更多
A novel variable camber wing driven by ultrasonic motors is proposed.Key techniques of distributed layout of drive mechanisms,coordination control of distributed ultrasonic motors as well as novel flexible skin underg...A novel variable camber wing driven by ultrasonic motors is proposed.Key techniques of distributed layout of drive mechanisms,coordination control of distributed ultrasonic motors as well as novel flexible skin undergoing one-dimensional morphing are studied.The system integration of small variable camber wing is achieved.Distributed layout of parallelogram linkages driven by geared ultrasonic motors is adopted for morphing,aimed at reducing the load for each motor and producing various aerodynamic configurations suitable for different flying states.Programmable system-on-chip(PSoC)is used to realize the coordination control of the distributed ultrasonic motors.All the morphing driving systems are assembled in the interior of the wing.The wing surface is covered with a novel smooth flexible skin in order to maintain wing shape and decrease the aerodynamic drag during morphing.Wind tunnel test shows that the variable camber wing can realize morphing under low speed flight condition.Lift and drag characteristics and aerodynamic efficiency of the wing are improved.Appropriate configurations can be selected to satisfy aerodynamic requirements of different flight conditions.The study provides a practical application of piezoelectric precision driving technology in flow control.展开更多
The method for analyzing the deformation of flexible skin under the air loads was developed based on the panel method and finite element method.The deformation of flexible skin under air pressures and effects of the l...The method for analyzing the deformation of flexible skin under the air loads was developed based on the panel method and finite element method.The deformation of flexible skin under air pressures and effects of the local deformation on the aerodynamic characteristics were discussed.Numerical results show that the flexible skin on the upper surface of trailing-edge will bubble under the air loads and the bubble has a powerful effect on the aerodynamic pressure near the surface of local deforma-tion.Then the stiffness requirements for flexible skin of variable trailing-edge were given by using the Jacobs rule,i.e.,the maximum displacement of skin is not greater than 0.1% of wing chord.Results show that the in-plane stiffness can be reduced by increasing the ratio of bending stiffness to in-plane stiffness.Although the deformation of flexible skin increases with the in-plane stiffness decreasing,it depends on the bending stiffness.When the bending stiffness exceeds critical value,the deformation of flexible skin only depends on the bending stiffness and has nothing to do with the in-plane stiffness.The conclusions can be used for the structural design of flexible skin.展开更多
A conventional Fowler flap is designed to improve the take-off and landing performances of an aircraft. Because the flight states of general aviation aircraft vary significantly. A Fowler flap with a double-sliding tr...A conventional Fowler flap is designed to improve the take-off and landing performances of an aircraft. Because the flight states of general aviation aircraft vary significantly. A Fowler flap with a double-sliding track has been designed, which is ca- pable of changing airfoil camber while cruising and climbing as well as meeting low-speed performance requirements. The aerodynamic characteristics of the variable camber Fowler flap were studied by computational simulation, and cambering was found to be beneficial for improving the lift-to-drag ratio when the lift coefficient was larger than the critical value, below which decambering was more effective; this critical value differed somewhat under different conditions. Taking the mecha- nism into account, the take-off and landing configurations were optimized on the basis of the GA （W）-1 airfoil with a 30% chord Fowler flap. Compared with reference configuration, the maximum lift coefficient of optimized take-off configuration was increased by 6.6% as well as the stalling angle and the lift-to-drag ratio were increased by 1.3° and 7.58%, respectively. Moreover, the maximum lift coefficient of the optimized landing configuration was increased by 6.3%, and the stalling angle was increased by 1.1°; however, the nose-down pitching moment of both configurations increased. Similar results were at- rained on a general aviation aircraft wing/body combination nism was established in a computer-aided design system, achieved by the double-sliding track. A 3D model of the variable-camber Fowler flap driving mecha- and the results showed that all design configurations could be展开更多
文摘Trailing-edge flap is traditionally used to improve the takeoff and landing aerodynamic performance of aircraft.In order to improve flight efficiency during takeoff,cruise and landing states,the flexible variable camber trailing-edge flap is introduced,capable of changing its shape smoothly from 50% flap chord to the rear of the flap.Using a numerical simulation method for the case of the GA（W）-2 airfoil,the multi-objective optimization of the overlap,gap,deflection angle,and bending angle of the flap under takeoff and landing configurations is studied.The optimization results show that under takeoff configuration,the variable camber trailing-edge flap can increase lift coefficient by about 8% and lift-to-drag ratio by about 7% compared with the traditional flap at a takeoff angle of 8°.Under landing configuration,the flap can improve the lift coefficient at a stall angle of attack about 1.3%.Under cruise state,the flap helps to improve the lift-todrag ratio over a wide range of lift coefficients,and the maximum increment is about 30%.Finally,a corrugated structure–eccentric beam combination bending mechanism is introduced in this paper to bend the flap by rotating the eccentric beam.
基金Sponsored by the Specialized Research Fund for the Doctoral Program of Higher Education(Grant No.20102302120032)the Open Foundation of Key Laboratory of Advanced Composites in Special Environmentsthe Natural Scientific Research Innovation Foundation in Harbin Institute of Technology(Grant No.HIT.NSRIF.2012028)
文摘A variable camber wing driven by pneumatic artificial muscles is developed in this paper. Firstly, the experimental setup to measure the static output force of pneumatic artificial muscle is designed and the relationship between the static output force and the air pressure is investigated. Experimental results show that the static output force of pneumatic artificial muscle decreases nonlinearly with the increase of contraction ratio. Secondly, the model of variable camber wing driven by pneumatic artificial muscles is manufactured to validate the variable camber concept. Finally, wind tunnel tests are conducted in the low speed wind tunnel. It is found that the wing camber increases with the increase of air pressure. When the air pressure of PAMs is 0.4 MPa and 0.5 MPa, the tip displacement of the trailing-edge is 3 mm and 5 mm, respectively. The lift of aerofoil with flexible trailing-edge increases by 87% at AOA of 5°.
基金supported by the National Research Project“Variable Camber Wing Technology(VCAN)”,China。
文摘Variable camber wing technology is one of the important development trends of green aviation at present.Through smooth,seamless,continuous and adaptive change of wing camber,the aerodynamic performance is improved in achieving increase in lift and reduction in resistance and noise.Based on the aerodynamic validation model CAE-AVM,Chinese Aeronautical Establishment(CAE)has carried out the design and validation of a variable camber wing,proposed an aerodynamic deformation matrix for the leading and trailing edges of aircraft wings in takeoff,landing and cruise conditions.Various structures and driving schemes are compared,and several key technology problems of leading and trailing edge deformation are solved.A full-size leading edge wind tunnel test piece with a span of 2.7 m and a trailing edge ground function test piece are developed.The deformation and shape maintenance capabilities of the leading edge is verified under real wind load conditions,and the load bearing and deformation capabilities of the trailing edge is verified under simulated follow-on load.The results indicate that the leading and trailing edges of the variable camber wing can achieve the required deformation angle and have a certain load-bearing capacity.Our study can provide some insights into the application of variable camber wing technology for civil aircraft.
基金supported by the National Natural Science Foundation of China(Nos.50905085,91116020)the Aviation Science Foundation of China(No.20100112005)
文摘A novel variable camber wing driven by ultrasonic motors is proposed.Key techniques of distributed layout of drive mechanisms,coordination control of distributed ultrasonic motors as well as novel flexible skin undergoing one-dimensional morphing are studied.The system integration of small variable camber wing is achieved.Distributed layout of parallelogram linkages driven by geared ultrasonic motors is adopted for morphing,aimed at reducing the load for each motor and producing various aerodynamic configurations suitable for different flying states.Programmable system-on-chip(PSoC)is used to realize the coordination control of the distributed ultrasonic motors.All the morphing driving systems are assembled in the interior of the wing.The wing surface is covered with a novel smooth flexible skin in order to maintain wing shape and decrease the aerodynamic drag during morphing.Wind tunnel test shows that the variable camber wing can realize morphing under low speed flight condition.Lift and drag characteristics and aerodynamic efficiency of the wing are improved.Appropriate configurations can be selected to satisfy aerodynamic requirements of different flight conditions.The study provides a practical application of piezoelectric precision driving technology in flow control.
基金Supported by China Postdoctoral Science Foundation (Grant No 20080440888)
文摘The method for analyzing the deformation of flexible skin under the air loads was developed based on the panel method and finite element method.The deformation of flexible skin under air pressures and effects of the local deformation on the aerodynamic characteristics were discussed.Numerical results show that the flexible skin on the upper surface of trailing-edge will bubble under the air loads and the bubble has a powerful effect on the aerodynamic pressure near the surface of local deforma-tion.Then the stiffness requirements for flexible skin of variable trailing-edge were given by using the Jacobs rule,i.e.,the maximum displacement of skin is not greater than 0.1% of wing chord.Results show that the in-plane stiffness can be reduced by increasing the ratio of bending stiffness to in-plane stiffness.Although the deformation of flexible skin increases with the in-plane stiffness decreasing,it depends on the bending stiffness.When the bending stiffness exceeds critical value,the deformation of flexible skin only depends on the bending stiffness and has nothing to do with the in-plane stiffness.The conclusions can be used for the structural design of flexible skin.
文摘A conventional Fowler flap is designed to improve the take-off and landing performances of an aircraft. Because the flight states of general aviation aircraft vary significantly. A Fowler flap with a double-sliding track has been designed, which is ca- pable of changing airfoil camber while cruising and climbing as well as meeting low-speed performance requirements. The aerodynamic characteristics of the variable camber Fowler flap were studied by computational simulation, and cambering was found to be beneficial for improving the lift-to-drag ratio when the lift coefficient was larger than the critical value, below which decambering was more effective; this critical value differed somewhat under different conditions. Taking the mecha- nism into account, the take-off and landing configurations were optimized on the basis of the GA （W）-1 airfoil with a 30% chord Fowler flap. Compared with reference configuration, the maximum lift coefficient of optimized take-off configuration was increased by 6.6% as well as the stalling angle and the lift-to-drag ratio were increased by 1.3° and 7.58%, respectively. Moreover, the maximum lift coefficient of the optimized landing configuration was increased by 6.3%, and the stalling angle was increased by 1.1°; however, the nose-down pitching moment of both configurations increased. Similar results were at- rained on a general aviation aircraft wing/body combination nism was established in a computer-aided design system, achieved by the double-sliding track. A 3D model of the variable-camber Fowler flap driving mecha- and the results showed that all design configurations could be
