The vacancy defect exhibits a remarkable improvement in the dehydriding property of MgH_(2)@Ni-CNTs.However,the corresponding mechanism is still not fully understood.Herein,the impact of vacancy defects on the dehydro...The vacancy defect exhibits a remarkable improvement in the dehydriding property of MgH_(2)@Ni-CNTs.However,the corresponding mechanism is still not fully understood.Herein,the impact of vacancy defects on the dehydrogenation properties of MgH_(2)@Ni-CNTs was studied by DFT simulation,and the corresponding models were constructed based on MS.The dehydrogenation process of MgH_(2)can be regarded as the dissociation of Mg-H and desorption of H_(2)from the MgH_(2)surface.In view of the whole dehydrogenation,the dissociation of H^(−)is the rate-determining step,which is the main reason for restricting the dehydrogenation kinetics.Compared with vacancy vacancy-defective MgH_(2)(001)surface,the appearance of vacancy defects on the(110)surface substantially reduces the energy barrier required for H dissociation to 0.070 Ha.The reason is that vacancy defects accelerate the transition of electrons from the H^(−)s orbit to the Mg^(2+)3s orbit,resulting in a decrement of the Mg-H bond strength,which makes H atoms more easily dissociated from the MgH_(2)(110)surface.Therefore,the existence of vacancy defects improves the dehydriding kinetic of MgH_(2).Most importantly,this research offers crucial directions for developing hydrogen storage materials as well as a potential fix for the slow dehydrogenation kinetics of nano-confined MgH_(2).展开更多
In order to explore the effect of vacancy defects on the structural,electronic,magnetic and optical properties of CoS_(2) and FeS_(2),first-principles calculation method was used to investigate the alloys.The calculat...In order to explore the effect of vacancy defects on the structural,electronic,magnetic and optical properties of CoS_(2) and FeS_(2),first-principles calculation method was used to investigate the alloys.The calculated results of materials without vacancy are consistent with those reported in the literatures,while the results of materials with vacancy defect were different from those of literatures due to the difference vacancy concentration.The Co vacancy defect hardly changes the half-metallic characteristic of CoS_(2).The Fe vacancy defect changes FeS_(2) from semiconductor to half-metal,and the bottom of the spin-down conduction band changes from the p orbital state of S to the d(t_(2g))orbital state of Fe,while the top of the valence band remains the d orbital d(eg)state of Fe.The half-metallic Co vacancy defects of CoS_(2) and Fe vacancy defects of FeS_(2) are expected to be used in spintronic devices.S vacancy defects make both CoS_(2) and FeS_(2) metallic.Both the Co and S vacancy defects lead to the decrease of the magnetic moment of CoS_(2),while both the Fe and S vacancy defects lead to the obvious magnetic property of FeS_(2).Vacancy defects enhance the absorption coefficient of infrared band and long band of visible light obviously,and produce obvious red shift phenomenon,which is expected to be used in photoelectric devices.展开更多
The electronic properties of sphalerite(110) surface with Zn-vacancy and S-vacancy were calculated by using density-functional theory,and the effects of vacancy defect on the copper activation of sphalerite were inves...The electronic properties of sphalerite(110) surface with Zn-vacancy and S-vacancy were calculated by using density-functional theory,and the effects of vacancy defect on the copper activation of sphalerite were investigated.The calculated results indicate that surface state occurs in the band gap of Zn-vacancy sphalerite,which is from the contribution of S 3p orbital at the first layer of the surface.The presence of S-vacancy results in surface state appearing near the Fermi level and the bottom of conductor band,which are composed of S 3p and Zn 4s orbital,respectively.The surface structure of Zn-vacancy sphalerite is more stable than S-vacancy surface due to the occupation of Zn-vacancy by Cu atoms;hence,the substitution reaction of Cu for Zn vacancy is easier than the substitution of Cu for Zn atoms with S-vacancy surface.展开更多
We investigate the microstructures of the pure aluminium foil and filter used on the space solar telescope, irradiated by photons with different doses. The vacancy defect clusters induced by proton irradiation in both...We investigate the microstructures of the pure aluminium foil and filter used on the space solar telescope, irradiated by photons with different doses. The vacancy defect clusters induced by proton irradiation in both samples are characterized by transmission electron microscopy, and the density and the size distribution of vacancy defect clusters are determined. Their transmittances are measured before and after irradiating the samples by protons with energy E = 100 keV and dose φ = 6 × 10^11/mm^2. Our experimental results show that the density and the size of vacancy defect clusters increase with the increase of irradiation doses in the irradiated pure aluminium foils. As irradiation dose increases, vacancies incline to form larger defect clusters. In the irradiated filter, a large number of banded void defects are observed at the agglomerate boundary, which results in the degradation of the optical and mechanical performances of the filter after proton irradiation.展开更多
The defect chemistry is successfully modulated on free-standing and binder-free carbon cathodes for highly efficient Li-S redox reactions.Such rationally regulated defect engineering realizes the synchronization of io...The defect chemistry is successfully modulated on free-standing and binder-free carbon cathodes for highly efficient Li-S redox reactions.Such rationally regulated defect engineering realizes the synchronization of ion/electron-conductive and defect-rich networks on the threedimension carbon cathode,leading to its tunable activity for both relieving the shuttle phenomenon and accelerating the sulfur redox reaction kinetics.As expected,the defective carbon cathode harvests a high rate capacity of 1217.8 mAh g^(-1)at 0.2 C and a superior capacity retention of61.7%at 2 C after 500 cycles.Even under the sulfur mass loading of 11.1 mg cm^(-2),the defective cathode still holds a remarkable areal capacity of 8.5 mAh cm^(-2).展开更多
Improving brittle behavior and mechanical properties is still a big challenge for high-temperature structural materials.By means of first-principles calculations,in this paper,we systematically investigate the effect ...Improving brittle behavior and mechanical properties is still a big challenge for high-temperature structural materials.By means of first-principles calculations,in this paper,we systematically investigate the effect of vacancy and oxygen occupation on the elastic properties and brittle-or-ductile behavior on Mo_(5)Si_(3).Four vacancies(Si_(-Va1),Si_(-Va2),Mo_(-Va1),Mo_(-Va2))and oxygen occupation models(O_(Mo1),O_(Mo2),O_(-Si1),O_(-Si2))are selected for research.It is found that Mo_(-Va2) vacancy has the stronger structural stability in the ground state in comparison with other vacancies.Besides,the deformation resistance and hardness of the parent Mo_(5)Si_(3) are weakened due to the introduction of different vacancy defects and oxygen occupation.The ratio of B/G indicates that oxygen atoms occupation and vacancy defects result in brittle-to-ductile transition for Mo_(5)Si_(3).These vacancies and the oxygen atoms occupation change the localized hybridization between Mo-Si and Mo-Mo atoms.The weaker O-Mo bond is a contributing factor for the excellent ductile behavior in the O_(-Si2) model for Mo_(5)Si_(3).展开更多
Graphene is the strongest material but its performance is significantly weakened by vacancy defects. We use molecular dynamics simulations to inves- tigate the tensile behavior of a graphene which contains a single va...Graphene is the strongest material but its performance is significantly weakened by vacancy defects. We use molecular dynamics simulations to inves- tigate the tensile behavior of a graphene which contains a single vacancy defect. Our results suggest that because of the single vacancy, the fracture strength of graphene losses about 17.7%. The stress concentration around the vacancy defect leads to the destruction of nearby six-member rings structure, which forms the initial crack. The propagation direction of this crack in defective graphene is at an angle of 60° to the tensile direction initially, but then becomes perpendicular to the tensile direction.展开更多
The effects of vacancy defects on the thermal conductivity of Ge thin films were investigated by employing molecular dynamics （MD） simula- tions and theoretical analysis based on the Boltzmann equation. Both the MD ...The effects of vacancy defects on the thermal conductivity of Ge thin films were investigated by employing molecular dynamics （MD） simula- tions and theoretical analysis based on the Boltzmann equation. Both the MD and theoretical results show that the lattice thermal conductivity dramatically decreases with the increasing of vacancy concentration at 400 and 500 K. In addition, the dependence of vacancy concentration on the thermal conductivity of Ge thin films becomes less sensitive as the temperature increases. Theoretical results also confirm that the major part of the lattice thermal conductivity reduction is associated with the point-defect scattering and phonon-phonon scattering processes.展开更多
We study the plasmonic properties of hybrid nanostructures consisting of double vacancy defected graphene(DVDGr)and metallic nanoarrays using the time-dependent density functional theory. It is found that DVDGr with p...We study the plasmonic properties of hybrid nanostructures consisting of double vacancy defected graphene(DVDGr)and metallic nanoarrays using the time-dependent density functional theory. It is found that DVDGr with pure and mixed noble/transition-metal nanoarrays can produce a stronger light absorption due to the coherent resonance of plasmons than graphene nanostructures. Comparing with the mixed Au/Pd nanoarrays, pure Au nanoarrays have stronger plasmonic enhancement. Furthermore, harmonics from the hybrid nanostructures exposed to the combination of lasers ranged from ultraviolet to infrared and a controlling pulse are investigated theoretically. The harmonic plateau can be broadened significantly and the energy of harmonic spectra is dramatically extended by the controlling pulse. Thus, it is possible to tune the width and intensity of harmonic spectrum to achieve broadband absorption of radiation. The methodology described here not only improves the understanding of the surface plasmon effect used in a DVDGr-metal optoelectronic device but also may be applicable to different optical technologies.展开更多
Developing low-cost,efficient,and stable photocatalysts is one of the most promising methods for large-scale solar water splitting.As a metal-free semiconductor material with suitable band gap,graphitic carbon nitride...Developing low-cost,efficient,and stable photocatalysts is one of the most promising methods for large-scale solar water splitting.As a metal-free semiconductor material with suitable band gap,graphitic carbon nitride(g-C_(3)N_(4))has attracted attention in the field of photocatalysis,which is mainly attributed to its fascinating physicochemical and photoelectronic properties.However,several inherent limitations and shortcomings—involving high recombination rate of photocarriers,insufficient reaction kinetics,and optical absorption—impede the practical applicability of g-C_(3)N_(4).As an effective strategy,vacancy defect engineering has been widely used for breaking through the current limitations,considering its ability to optimize the electronic structure and surface morphology of g-C_(3)N_(4) to obtain the desired photocatalytic activity.This review summarizes the recent progress of vacancy defect engineered g-C_(3)N_(4) for solar water splitting.The fundamentals of solar water splitting with g-C_(3)N_(4) are discussed first.We then focus on the fabrication strategies and effect of vacancy generated in g-C_(3)N_(4).The advances of vacancy-modified g-C_(3)N_(4) photocatalysts toward solar water splitting are discussed next.Finally,the current challenges and future opportunities of vacancy-modified g-C_(3)N_(4) are summarized.This review aims to provide a theoretical basis and guidance for future research on the design and development of highly efficient defective g-C_(3)N_(4).展开更多
The relationship between temperature and oxygen vacancy concentration is deduced in this paper. Based on the data of thermal weight-loss experiment, the formation enthalpies of congruent and several doped LN crystals ...The relationship between temperature and oxygen vacancy concentration is deduced in this paper. Based on the data of thermal weight-loss experiment, the formation enthalpies of congruent and several doped LN crystals have been calculated. It was found that the formation enthalpy of oxygen vacancies can be decreased evidently by doping valence-changeable ions. The experimental results were discussed and a new reduction process of the photorefractive LN crystal at a relatively low temperature was proposed, and the reduced crystals showed a good effect in practical use.展开更多
Vacancy defects,as fundamental disruptions in metallic lattices,play an important role in shaping the mechanical and electronic properties of aluminum crystals.However,the influence of vacancy position under coupled t...Vacancy defects,as fundamental disruptions in metallic lattices,play an important role in shaping the mechanical and electronic properties of aluminum crystals.However,the influence of vacancy position under coupled thermomechanical fields remains insufficiently understood.In this study,transmission and scanning electron microscopy were employed to observe dislocation structures and grain boundary heterogeneities in processed aluminum alloys,suggesting stress concentrations and microstructural inhomogeneities associated with vacancy accumulation.To complement these observations,first-principles calculations and molecular dynamics simulations were conducted for seven single-vacancy configurations in face-centered cubic aluminum.The stress response,total energy,density of states(DOS),and differential charge density were examined under varying compressive strain(ε=0–0.1)and temperature(0–600 K).The results indicate that face-centered vacancies tend to reduce mechanical strength and perturb electronic states near the Fermi level,whereas corner and edge vacancies appear to have weaker effects.Elevated temperatures may partially restore electronic uniformity through thermal excitation.Overall,these findings suggest that vacancy position exerts a critical but position-dependent influence on coupled structure-property relationships,offering theoretical insights and preliminary experimental support for defect-engineered aluminum alloy design.展开更多
L1_(0)-FePt nanoparticles(NPs)are urgently anticipated because of their promising applications.However,the preparation of the NPs with both of high ordering degree and super-fine size is still a challenge.Inspired by ...L1_(0)-FePt nanoparticles(NPs)are urgently anticipated because of their promising applications.However,the preparation of the NPs with both of high ordering degree and super-fine size is still a challenge.Inspired by recent studies on the effect of vacancy defects on structural ordering,we proposed an intentional vacancy defect design strategy for directly synthesizing highly ordered FePt NPs.In the present work,we used the first-principle calculations to investigate the influence of doping typical elements(Cu,Ag,and Pb)on the vacancy formation energy(E_(vac))of FePt NPs.The vacancy defects were effectively formed by introducing elements of larger atomic radii and higher propensity for segregation into the FePt lattice,facilitating the diffusion of Fe and Pt atoms.The Pb doping showed remarkable efficacy in promoting the ordering transition.Experimentally,wet-chemical synthesis confirmed the success of the proposed strategy in achieving highly ordered L1_(0)-FePt NPs with exceptional magnetic properties and super-fine size(ordering degree of 0.896,impressive coercivity of 21.74 kOe,and small particle size of 9.02 nm).Additionally,we have deduced a diffusion model elucidating the formation process of the ordered FePt NPs,focusing on the migration of Pb atoms from the center to the surface of the particles.This migration is demonstrated to generate more vacancies and promote the transition to the ordered L1_(0)-FePt phase.The findings of this research offer valuable insights into synthesizing highly ordered and ultrafine L1_(0)-type nanomaterials.展开更多
The therapeutic efficacy of cuproptosis,ferroptosis,and apoptosis is hindered by inadequate intracellular copper and iron levels,hypoxia,and elevated glutathione(GSH)expression in tumor cells.Thermoelectric technology...The therapeutic efficacy of cuproptosis,ferroptosis,and apoptosis is hindered by inadequate intracellular copper and iron levels,hypoxia,and elevated glutathione(GSH)expression in tumor cells.Thermoelectric technology is an emerging frontier in medical therapy that aims to achieve efficient thermal and electrical transport characteristics within a narrow thermal range for biological systems.Here,we systematically constructed biodegradable Cu_(2)MnS_(3-x)-PEG/glucose oxidase(MCPG)with sulfur vacancies(S_(V))using photothermoelectric catalysis(PTEC),photothermal-enhanced enzyme catalysis,and starvation therapy.This triggers GSH consumption and disrupts intracellular redox homeostasis,leading to immunogenic cell death.Under 1064 nm laser irradiation,MCPG enriched with S_(V),owing to doping,generates a local temperature gradient that activates PTEC and produces toxic reactive oxygen species(ROS).Hydroxyl radicals and oxygen are generated through peroxide and catalase-like processes.Increased oxygen levels alleviate tumor hypoxia,whereas hydrogen peroxide production from glycometabolism provides sufficient ROS for a cascade catalytic reaction,establishing a self-reinforcing positive mechanism.Density functional theory calculations demonstrated that vacancy defects effectively enhanced enzyme catalytic activity.Multimodal imaging-guided synergistic therapy not only damages tumor cells,but also elicits an antitumor immune response to inhibit tumor metastasis.This study offers novel insights into the cuproptosis/ferroptosis/apoptosis pathways of Cu-based PTEC nanozymes.展开更多
Recently,high-entropy materials are attracting enormous attention in battery applications,encompassing both electrode materials and solid electrolytes,due to the pliability and diversification in material composition ...Recently,high-entropy materials are attracting enormous attention in battery applications,encompassing both electrode materials and solid electrolytes,due to the pliability and diversification in material composition and electronic structure.Theoretically,the rapid ion transport and the abundance of surface defects in high-entropy materials suggest a potential for enhancing the performance of composite solid-state electrolytes(CPEs).Herein,using a high-entropy oxide(HEO)filler to assess its potential contributions to CPEs is proposed.The distinctive structural distortions in HEO significantly improve the ionic conductivity(5×10^(−4) S·cm^(−1) at 60℃)and Li-ion transference number(0.57)of CPEs.Furthermore,the enhanced Li-ion transport capability extends the critical current density from 0.6 to 1.5 mA·cm^(−2) in Li/Li symmetric cells.In addition,all-solid-state batteries incorporating the HEO-modified CPEs exhibit superior rate performance and cycling stability.The work will enrich the application of HEOs in CPEs and provide fundamental understanding.展开更多
Bismuth titanate (Bi_(4)Ti_(3)O_(12),BIT)piezoelectric materials have attracted increasing attention due to their high-temperature applications.However,it is quite challenging to simultaneously achieve outstanding pie...Bismuth titanate (Bi_(4)Ti_(3)O_(12),BIT)piezoelectric materials have attracted increasing attention due to their high-temperature applications.However,it is quite challenging to simultaneously achieve outstanding piezoelectric properties and high Curie temperature in BIT-based systems.In this study,oxygen vacancy defects tailoring strategy was utilized to solve this problem,excellent piezoelectric coefficient(32.1 pC/N),and ultrahigh Curie temperature(659℃)are gotten in Bi_(4)Ti_(3)-x(Mn_(1/3)Nb_(2/3))xO_(12)(BTMN)ceramics,which are among the top values in the BIT-based ceramics.More importantly,the(Mn_(1/3)Nb_(2/3))(4+d)+complex-ion modified Bi_(4)Ti_(3)O_(12)-based ceramics are characterized with excellent piezoelectric stability up to 500℃(d33>30.0 pC/N at 500℃))and significantly reduced conductivity(only~10^(-7)U-1 cm^(-1)at 500℃).Moreover,enhanced ferroelectricity and good dielectric stability were also obtained.The better comprehensive properties can be ascribed to two aspects.First,the concentration of oxygen vacancy defects is obviously reduced,and their distribution is effectively controlled in BITMN ceramics.Second,the introduction of(Mn_(1/3)Nb_(2/3))^((4+δ)+)complex-ion gives rise to the antiphase boundaries and massive ferroelectric domain walls.This works not only reveal the high potential of BITMN ceramics for high-temperature piezoelectric applications but also deepen the understanding of the structure-properties relationship in BIT-based materials.展开更多
MoS_(2)is a promising electrocatalyst because of its natural abundance and outstanding electrochemical stability.However,the poor conductivity and low activity limit its catalytic performance;furthermore,MoS_(2)is una...MoS_(2)is a promising electrocatalyst because of its natural abundance and outstanding electrochemical stability.However,the poor conductivity and low activity limit its catalytic performance;furthermore,MoS_(2)is unable to satisfy the requirements of most industrial applications.In this study,to obtain a P-doped MoS_(2)catalyst with S vacancy defects,P is inserted into the MoS_(2)matrix via a solid phase ion exchange at room temperature.The optimal P-doping amount is 11.4 wt%,and the resultant catalyst delivers excellent electrocatalytic properties for the hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)with the corresponding overpotentials of 93 and 316 mV at 10 mA cm^(-2) in an alkaline solution;these values surpass the overpotentials of most previously reported MoS_(2)-based materials.Theoretical calculations and results demonstrate that the synergistic effect of the doped P,which forms active centers in the basal plane of MoS_(2),and S vacancy defects caused by P doping intensifies the intrinsic electronic conductivity and electrocatalytic activity of the catalyst.Density functional theory calculations demonstrate that P optimizes the free energy of the MoS_(2)matrix for hydrogen adsorption,thereby considerably increasing the intrinsic activity of the doped catalyst for the HER compared with that observed from pristine MoS_(2).The enhanced catalytic activity of P-doped MoS_(2)for the OER is attributed to the ability of the doped P which facilitates the adsorption of hydroxyl and hydroperoxy intermediates and reduces the reaction energy barrier.This study provides a new environmentally friendly and convenient solid-phase ion exchange method to improve the electrocatalytic capability of two-dimensional transition-metal dichalcogenides in largescale applications.展开更多
Photo-induced vacancy defects are employed strategically to imbue semiconductors with enhanced performance characteristics for many important applications such as surface-enhanced Raman scattering(SERS)sensing,photoca...Photo-induced vacancy defects are employed strategically to imbue semiconductors with enhanced performance characteristics for many important applications such as surface-enhanced Raman scattering(SERS)sensing,photocatalysis,and photovoltaic applications.However,the long-term maintenance and use of photo-induced vacancy defects remain elusive,because of their rapid self-healing upon air exposure.In this study,we demonstrate that photo-induced oxygen vacancy(PIVO)defects can be stabilized by the photoexcitation of metal–organic framework(MOF)materials,which is crucial for SERS analysis.The PIVO defects in MOF materials are stable for at least two weeks in the ambient atmosphere,owing to the combination of steric hindrance and electron delocalization around vacancy defects,which significantly contrasts the short lifetime(within minutes)of PIVO defects in metal-oxide semiconductors.With the formation of stable PIVO defects,a prominent SERS enhancement surpassing that of pristine MOFs is achieved,accompanied with a reduced limit of detection by three orders of magnitude.Moreover,the additional SERS enhancement rendered by PIVO defects can be stably retained and is effective for monitoring various small molecules,such as dopamine and bisphenol A.展开更多
The introduction of vacancy defects in semiconductors has been proven to be a highly effective approach to improve their photocatalytic activity owing to their advantages of promoting light absorption,facilitating pho...The introduction of vacancy defects in semiconductors has been proven to be a highly effective approach to improve their photocatalytic activity owing to their advantages of promoting light absorption,facilitating photogenerated carrier separation,optimizing electronic structure,and enabling the production of reactive radicals.Herein,we outline the state-of-the-art vacancy-engineered photocatalysts in various applications and reveal how the vacancies influence photocatalytic performance.Specifically,the types of vacancy defects,the methods for tailoring vacancies,the advanced characteri-zation techniques,the categories of photocatalysts with vacancy defects,and the corresponding photocatalytic behaviors are presented.Meanwhile,the methods of vacancies creation and the related photocatalytic performance are correlated,which can be very useful to guide the readers to quickly obtain in-depth knowledge and to have a good idea about the selection of defect engineering methods.The precise characterization of vacancy defects is highly challenging.This review describes the accurate use of a series of characterization techniques with detailed comments and suggestions.This represents the uniqueness of this comprehensive review.The challenges and development prospects in engineering photocatalysts with vacancy defects for practical applications are discussed to provide a promising research direction in this field.展开更多
Role of vacancy-type（N vacancy（VN） and Ga vacancy（VGa）） defects in magnetism of GaMnN is investigated by first-principle calculation.Theoretical results show that both the VNand VGainfluence the ferromagnetic st...Role of vacancy-type（N vacancy（VN） and Ga vacancy（VGa）） defects in magnetism of GaMnN is investigated by first-principle calculation.Theoretical results show that both the VNand VGainfluence the ferromagnetic state of a system.The VNcan induce antiferromagnetic state and the VGaindirectly modify the stability of the ferromagnetic state by depopulating the Mn levels in GaMnN.The transfer of electrons between the vacancy defects and Mn ions results in converting Mn3＋（d4） into Mn2＋（d5）.The introduced VNand the ferromagnetism become stronger and then gradually weaker with Mn concentration increasing,as well as the coexistence of Mn3＋（d4） and Mn2＋（d5） are found in GaMnN films grown by metal–organic chemical vapor deposition.The analysis suggests that a big proportion of Mn3＋changing into Mn2＋will reduce the exchange interaction and magnetic correlation of Mn atoms and lead to the reduction of ferromagnetism of material.展开更多
基金financed by the National Key Research and Development Program of China(Grant No.2021YFB3802400)the National Natural Science Foundation of China(Grants Nos.52071141,52271212,52201250,and 51771056)+1 种基金the Natural Science Foundation of Hebei Province(Grant No.E2018502054)the Fundamental Research Funds for the Central Universities(Grant No.2023MS148).
文摘The vacancy defect exhibits a remarkable improvement in the dehydriding property of MgH_(2)@Ni-CNTs.However,the corresponding mechanism is still not fully understood.Herein,the impact of vacancy defects on the dehydrogenation properties of MgH_(2)@Ni-CNTs was studied by DFT simulation,and the corresponding models were constructed based on MS.The dehydrogenation process of MgH_(2)can be regarded as the dissociation of Mg-H and desorption of H_(2)from the MgH_(2)surface.In view of the whole dehydrogenation,the dissociation of H^(−)is the rate-determining step,which is the main reason for restricting the dehydrogenation kinetics.Compared with vacancy vacancy-defective MgH_(2)(001)surface,the appearance of vacancy defects on the(110)surface substantially reduces the energy barrier required for H dissociation to 0.070 Ha.The reason is that vacancy defects accelerate the transition of electrons from the H^(−)s orbit to the Mg^(2+)3s orbit,resulting in a decrement of the Mg-H bond strength,which makes H atoms more easily dissociated from the MgH_(2)(110)surface.Therefore,the existence of vacancy defects improves the dehydriding kinetic of MgH_(2).Most importantly,this research offers crucial directions for developing hydrogen storage materials as well as a potential fix for the slow dehydrogenation kinetics of nano-confined MgH_(2).
基金Funded by the Scientific and Technologial Innovation Programs of Higher Education Institutions in Shanxi (No. 2020L0628)the Taiyuan Institute of Technology Scientific Research Initial Funding (No. 2022KJ072)+2 种基金the Program for the (Reserved) Discipline Leaders of Taiyuan Institute of Technologythe Fundamental Research Funds for the Central Universities (Nos. 2017TS004, 2017TS006, and GK201704005)Supported by HZWTECH for providing computational facilities
文摘In order to explore the effect of vacancy defects on the structural,electronic,magnetic and optical properties of CoS_(2) and FeS_(2),first-principles calculation method was used to investigate the alloys.The calculated results of materials without vacancy are consistent with those reported in the literatures,while the results of materials with vacancy defect were different from those of literatures due to the difference vacancy concentration.The Co vacancy defect hardly changes the half-metallic characteristic of CoS_(2).The Fe vacancy defect changes FeS_(2) from semiconductor to half-metal,and the bottom of the spin-down conduction band changes from the p orbital state of S to the d(t_(2g))orbital state of Fe,while the top of the valence band remains the d orbital d(eg)state of Fe.The half-metallic Co vacancy defects of CoS_(2) and Fe vacancy defects of FeS_(2) are expected to be used in spintronic devices.S vacancy defects make both CoS_(2) and FeS_(2) metallic.Both the Co and S vacancy defects lead to the decrease of the magnetic moment of CoS_(2),while both the Fe and S vacancy defects lead to the obvious magnetic property of FeS_(2).Vacancy defects enhance the absorption coefficient of infrared band and long band of visible light obviously,and produce obvious red shift phenomenon,which is expected to be used in photoelectric devices.
基金Project(50864001) supported by the National Natural Science Foundation of China
文摘The electronic properties of sphalerite(110) surface with Zn-vacancy and S-vacancy were calculated by using density-functional theory,and the effects of vacancy defect on the copper activation of sphalerite were investigated.The calculated results indicate that surface state occurs in the band gap of Zn-vacancy sphalerite,which is from the contribution of S 3p orbital at the first layer of the surface.The presence of S-vacancy results in surface state appearing near the Fermi level and the bottom of conductor band,which are composed of S 3p and Zn 4s orbital,respectively.The surface structure of Zn-vacancy sphalerite is more stable than S-vacancy surface due to the occupation of Zn-vacancy by Cu atoms;hence,the substitution reaction of Cu for Zn vacancy is easier than the substitution of Cu for Zn atoms with S-vacancy surface.
基金Project supported by the National Natural Science Foundation of China (Grant No. 50671042)the Program for Innovative Research Team of Jangsu University and the Program for Exellent Talents of Jangsu University (Grant No. 07JDG032)
文摘We investigate the microstructures of the pure aluminium foil and filter used on the space solar telescope, irradiated by photons with different doses. The vacancy defect clusters induced by proton irradiation in both samples are characterized by transmission electron microscopy, and the density and the size distribution of vacancy defect clusters are determined. Their transmittances are measured before and after irradiating the samples by protons with energy E = 100 keV and dose φ = 6 × 10^11/mm^2. Our experimental results show that the density and the size of vacancy defect clusters increase with the increase of irradiation doses in the irradiated pure aluminium foils. As irradiation dose increases, vacancies incline to form larger defect clusters. In the irradiated filter, a large number of banded void defects are observed at the agglomerate boundary, which results in the degradation of the optical and mechanical performances of the filter after proton irradiation.
基金supported by the National Natural Science Foundation of China(52172239)Project of State Key Laboratory of Environment-Friendly Energy Materials+2 种基金Southwest University of Science and Technology(Grant Nos.21fksy24 and 18ZD320304)Chongqing Talents:Exceptional Young Talents Project(Grant No.CQYC201905041)Natural Science Foundation of Chongqing China(Grant No.cstc2021jcyj-jqX0031)。
文摘The defect chemistry is successfully modulated on free-standing and binder-free carbon cathodes for highly efficient Li-S redox reactions.Such rationally regulated defect engineering realizes the synchronization of ion/electron-conductive and defect-rich networks on the threedimension carbon cathode,leading to its tunable activity for both relieving the shuttle phenomenon and accelerating the sulfur redox reaction kinetics.As expected,the defective carbon cathode harvests a high rate capacity of 1217.8 mAh g^(-1)at 0.2 C and a superior capacity retention of61.7%at 2 C after 500 cycles.Even under the sulfur mass loading of 11.1 mg cm^(-2),the defective cathode still holds a remarkable areal capacity of 8.5 mAh cm^(-2).
基金supported by grants from the Province Nature Science Foundation of Liaoning Province(Grant No.2019JH/30100019)。
文摘Improving brittle behavior and mechanical properties is still a big challenge for high-temperature structural materials.By means of first-principles calculations,in this paper,we systematically investigate the effect of vacancy and oxygen occupation on the elastic properties and brittle-or-ductile behavior on Mo_(5)Si_(3).Four vacancies(Si_(-Va1),Si_(-Va2),Mo_(-Va1),Mo_(-Va2))and oxygen occupation models(O_(Mo1),O_(Mo2),O_(-Si1),O_(-Si2))are selected for research.It is found that Mo_(-Va2) vacancy has the stronger structural stability in the ground state in comparison with other vacancies.Besides,the deformation resistance and hardness of the parent Mo_(5)Si_(3) are weakened due to the introduction of different vacancy defects and oxygen occupation.The ratio of B/G indicates that oxygen atoms occupation and vacancy defects result in brittle-to-ductile transition for Mo_(5)Si_(3).These vacancies and the oxygen atoms occupation change the localized hybridization between Mo-Si and Mo-Mo atoms.The weaker O-Mo bond is a contributing factor for the excellent ductile behavior in the O_(-Si2) model for Mo_(5)Si_(3).
基金supported by the Open Research Fund Program(2042014kf0002)of Wuhan Universitythe National Natural Science Foundation of China(11372230)the Open Research Fund Program(HBKLWJ-2014F02)of Key Laboratory of Hubei Province for Water Jet Theory&Technology
文摘Graphene is the strongest material but its performance is significantly weakened by vacancy defects. We use molecular dynamics simulations to inves- tigate the tensile behavior of a graphene which contains a single vacancy defect. Our results suggest that because of the single vacancy, the fracture strength of graphene losses about 17.7%. The stress concentration around the vacancy defect leads to the destruction of nearby six-member rings structure, which forms the initial crack. The propagation direction of this crack in defective graphene is at an angle of 60° to the tensile direction initially, but then becomes perpendicular to the tensile direction.
基金supported by the Program for Changjiang Scholars and Innovative Research Team in the Universities of the Ministry of Education of China (No. IRT0520)
文摘The effects of vacancy defects on the thermal conductivity of Ge thin films were investigated by employing molecular dynamics （MD） simula- tions and theoretical analysis based on the Boltzmann equation. Both the MD and theoretical results show that the lattice thermal conductivity dramatically decreases with the increasing of vacancy concentration at 400 and 500 K. In addition, the dependence of vacancy concentration on the thermal conductivity of Ge thin films becomes less sensitive as the temperature increases. Theoretical results also confirm that the major part of the lattice thermal conductivity reduction is associated with the point-defect scattering and phonon-phonon scattering processes.
基金Project supported by the National Key R&D Program of China(Grant No.2017YFA0303600)the National Natural Science Foundation of China(Grant Nos.11974253 and 11774248)。
文摘We study the plasmonic properties of hybrid nanostructures consisting of double vacancy defected graphene(DVDGr)and metallic nanoarrays using the time-dependent density functional theory. It is found that DVDGr with pure and mixed noble/transition-metal nanoarrays can produce a stronger light absorption due to the coherent resonance of plasmons than graphene nanostructures. Comparing with the mixed Au/Pd nanoarrays, pure Au nanoarrays have stronger plasmonic enhancement. Furthermore, harmonics from the hybrid nanostructures exposed to the combination of lasers ranged from ultraviolet to infrared and a controlling pulse are investigated theoretically. The harmonic plateau can be broadened significantly and the energy of harmonic spectra is dramatically extended by the controlling pulse. Thus, it is possible to tune the width and intensity of harmonic spectrum to achieve broadband absorption of radiation. The methodology described here not only improves the understanding of the surface plasmon effect used in a DVDGr-metal optoelectronic device but also may be applicable to different optical technologies.
基金This work is supported mainly by the National Key Research and Development Program of China(Grant No.2018YFE0204000)the National Natural Science Foundation of China(Grant Nos.21975245,U20A20206,51972300,12004094,and 32101004)+4 种基金the Strategic Priority Research Program of the Chinese Academy of Sciences(Grant No.XDB43000000)the Science and Technology Research and Development Program of Handan(Grant No.21422111246)Prof.Y.Huang.also acknowledges the support from the Doctoral Special Fund Project of Hebei University of Engineering.Prof.K.Liu.appreciates the support from Youth Innovation Promotion Association,the Chinese Academy of Sciences(Grant No.2020114)the Beijing Nova Program(Grant No.2020117)Guangdong Basic and Applied Basic Research Foundation(Grant No.2022A1515110578).
文摘Developing low-cost,efficient,and stable photocatalysts is one of the most promising methods for large-scale solar water splitting.As a metal-free semiconductor material with suitable band gap,graphitic carbon nitride(g-C_(3)N_(4))has attracted attention in the field of photocatalysis,which is mainly attributed to its fascinating physicochemical and photoelectronic properties.However,several inherent limitations and shortcomings—involving high recombination rate of photocarriers,insufficient reaction kinetics,and optical absorption—impede the practical applicability of g-C_(3)N_(4).As an effective strategy,vacancy defect engineering has been widely used for breaking through the current limitations,considering its ability to optimize the electronic structure and surface morphology of g-C_(3)N_(4) to obtain the desired photocatalytic activity.This review summarizes the recent progress of vacancy defect engineered g-C_(3)N_(4) for solar water splitting.The fundamentals of solar water splitting with g-C_(3)N_(4) are discussed first.We then focus on the fabrication strategies and effect of vacancy generated in g-C_(3)N_(4).The advances of vacancy-modified g-C_(3)N_(4) photocatalysts toward solar water splitting are discussed next.Finally,the current challenges and future opportunities of vacancy-modified g-C_(3)N_(4) are summarized.This review aims to provide a theoretical basis and guidance for future research on the design and development of highly efficient defective g-C_(3)N_(4).
文摘The relationship between temperature and oxygen vacancy concentration is deduced in this paper. Based on the data of thermal weight-loss experiment, the formation enthalpies of congruent and several doped LN crystals have been calculated. It was found that the formation enthalpy of oxygen vacancies can be decreased evidently by doping valence-changeable ions. The experimental results were discussed and a new reduction process of the photorefractive LN crystal at a relatively low temperature was proposed, and the reduced crystals showed a good effect in practical use.
基金supported by the Research Project on Strengthening the Construction of an Important Ecological Security Barrier in Northern China by Higher Education Institutions in the Inner Mongolia Autonomous Region(STAQZX202313)the Inner Mongolia Autonomous Region Education Science‘14th Five-Year Plan’2024 Annual Research Project(NGJGH2024635).
文摘Vacancy defects,as fundamental disruptions in metallic lattices,play an important role in shaping the mechanical and electronic properties of aluminum crystals.However,the influence of vacancy position under coupled thermomechanical fields remains insufficiently understood.In this study,transmission and scanning electron microscopy were employed to observe dislocation structures and grain boundary heterogeneities in processed aluminum alloys,suggesting stress concentrations and microstructural inhomogeneities associated with vacancy accumulation.To complement these observations,first-principles calculations and molecular dynamics simulations were conducted for seven single-vacancy configurations in face-centered cubic aluminum.The stress response,total energy,density of states(DOS),and differential charge density were examined under varying compressive strain(ε=0–0.1)and temperature(0–600 K).The results indicate that face-centered vacancies tend to reduce mechanical strength and perturb electronic states near the Fermi level,whereas corner and edge vacancies appear to have weaker effects.Elevated temperatures may partially restore electronic uniformity through thermal excitation.Overall,these findings suggest that vacancy position exerts a critical but position-dependent influence on coupled structure-property relationships,offering theoretical insights and preliminary experimental support for defect-engineered aluminum alloy design.
基金supported by the National Key Research and Development Program of China(Nos.2020YFA0907300 and 2021YFB3501404)the National Natural Science Foundation of China(Nos.52301234,52371179,and 52071070)+1 种基金the Doctoral Start-up Foundation of Liaoning Province(No.2023-BS-059)the Fundamental Research Funds for the Central Universities(No.N2309002).
文摘L1_(0)-FePt nanoparticles(NPs)are urgently anticipated because of their promising applications.However,the preparation of the NPs with both of high ordering degree and super-fine size is still a challenge.Inspired by recent studies on the effect of vacancy defects on structural ordering,we proposed an intentional vacancy defect design strategy for directly synthesizing highly ordered FePt NPs.In the present work,we used the first-principle calculations to investigate the influence of doping typical elements(Cu,Ag,and Pb)on the vacancy formation energy(E_(vac))of FePt NPs.The vacancy defects were effectively formed by introducing elements of larger atomic radii and higher propensity for segregation into the FePt lattice,facilitating the diffusion of Fe and Pt atoms.The Pb doping showed remarkable efficacy in promoting the ordering transition.Experimentally,wet-chemical synthesis confirmed the success of the proposed strategy in achieving highly ordered L1_(0)-FePt NPs with exceptional magnetic properties and super-fine size(ordering degree of 0.896,impressive coercivity of 21.74 kOe,and small particle size of 9.02 nm).Additionally,we have deduced a diffusion model elucidating the formation process of the ordered FePt NPs,focusing on the migration of Pb atoms from the center to the surface of the particles.This migration is demonstrated to generate more vacancies and promote the transition to the ordered L1_(0)-FePt phase.The findings of this research offer valuable insights into synthesizing highly ordered and ultrafine L1_(0)-type nanomaterials.
基金supported by the National Natural Science Foundation of China(NSFC 52002091,U22A20347,and 52102344)Heilongjiang Natural Science Foundation Project of Outstanding Youth Project(YQ2023B005)+1 种基金China Postdoctoral Science Foundation(2023T160154)the Fundamental Research Funds for the Central Universities。
文摘The therapeutic efficacy of cuproptosis,ferroptosis,and apoptosis is hindered by inadequate intracellular copper and iron levels,hypoxia,and elevated glutathione(GSH)expression in tumor cells.Thermoelectric technology is an emerging frontier in medical therapy that aims to achieve efficient thermal and electrical transport characteristics within a narrow thermal range for biological systems.Here,we systematically constructed biodegradable Cu_(2)MnS_(3-x)-PEG/glucose oxidase(MCPG)with sulfur vacancies(S_(V))using photothermoelectric catalysis(PTEC),photothermal-enhanced enzyme catalysis,and starvation therapy.This triggers GSH consumption and disrupts intracellular redox homeostasis,leading to immunogenic cell death.Under 1064 nm laser irradiation,MCPG enriched with S_(V),owing to doping,generates a local temperature gradient that activates PTEC and produces toxic reactive oxygen species(ROS).Hydroxyl radicals and oxygen are generated through peroxide and catalase-like processes.Increased oxygen levels alleviate tumor hypoxia,whereas hydrogen peroxide production from glycometabolism provides sufficient ROS for a cascade catalytic reaction,establishing a self-reinforcing positive mechanism.Density functional theory calculations demonstrated that vacancy defects effectively enhanced enzyme catalytic activity.Multimodal imaging-guided synergistic therapy not only damages tumor cells,but also elicits an antitumor immune response to inhibit tumor metastasis.This study offers novel insights into the cuproptosis/ferroptosis/apoptosis pathways of Cu-based PTEC nanozymes.
基金supported by the National Natural Science Foundation of China(No.52002094)Shenzhen Science and Technology Program(Nos.JCYJ20210324121411031,JSGG202108021253804014 and RCBS20210706092218040)Shenzhen Steady Support Plan(Nos.GXWD20221030205923001 and GXWD20201230155427003-20200824103000001).
文摘Recently,high-entropy materials are attracting enormous attention in battery applications,encompassing both electrode materials and solid electrolytes,due to the pliability and diversification in material composition and electronic structure.Theoretically,the rapid ion transport and the abundance of surface defects in high-entropy materials suggest a potential for enhancing the performance of composite solid-state electrolytes(CPEs).Herein,using a high-entropy oxide(HEO)filler to assess its potential contributions to CPEs is proposed.The distinctive structural distortions in HEO significantly improve the ionic conductivity(5×10^(−4) S·cm^(−1) at 60℃)and Li-ion transference number(0.57)of CPEs.Furthermore,the enhanced Li-ion transport capability extends the critical current density from 0.6 to 1.5 mA·cm^(−2) in Li/Li symmetric cells.In addition,all-solid-state batteries incorporating the HEO-modified CPEs exhibit superior rate performance and cycling stability.The work will enrich the application of HEOs in CPEs and provide fundamental understanding.
基金supported by the National Natural Science Foundation of China,China(Grant No.51932010)by the National Natural Science Foundation of Shanghai,China(Grant No.19ZR1464600).
文摘Bismuth titanate (Bi_(4)Ti_(3)O_(12),BIT)piezoelectric materials have attracted increasing attention due to their high-temperature applications.However,it is quite challenging to simultaneously achieve outstanding piezoelectric properties and high Curie temperature in BIT-based systems.In this study,oxygen vacancy defects tailoring strategy was utilized to solve this problem,excellent piezoelectric coefficient(32.1 pC/N),and ultrahigh Curie temperature(659℃)are gotten in Bi_(4)Ti_(3)-x(Mn_(1/3)Nb_(2/3))xO_(12)(BTMN)ceramics,which are among the top values in the BIT-based ceramics.More importantly,the(Mn_(1/3)Nb_(2/3))(4+d)+complex-ion modified Bi_(4)Ti_(3)O_(12)-based ceramics are characterized with excellent piezoelectric stability up to 500℃(d33>30.0 pC/N at 500℃))and significantly reduced conductivity(only~10^(-7)U-1 cm^(-1)at 500℃).Moreover,enhanced ferroelectricity and good dielectric stability were also obtained.The better comprehensive properties can be ascribed to two aspects.First,the concentration of oxygen vacancy defects is obviously reduced,and their distribution is effectively controlled in BITMN ceramics.Second,the introduction of(Mn_(1/3)Nb_(2/3))^((4+δ)+)complex-ion gives rise to the antiphase boundaries and massive ferroelectric domain walls.This works not only reveal the high potential of BITMN ceramics for high-temperature piezoelectric applications but also deepen the understanding of the structure-properties relationship in BIT-based materials.
基金supported by the National Natural Science Foundation of China(52072196)the Major Basic Research Program of the Natural Science Foundation of Shandong Province(ZR2020ZD09)。
文摘MoS_(2)is a promising electrocatalyst because of its natural abundance and outstanding electrochemical stability.However,the poor conductivity and low activity limit its catalytic performance;furthermore,MoS_(2)is unable to satisfy the requirements of most industrial applications.In this study,to obtain a P-doped MoS_(2)catalyst with S vacancy defects,P is inserted into the MoS_(2)matrix via a solid phase ion exchange at room temperature.The optimal P-doping amount is 11.4 wt%,and the resultant catalyst delivers excellent electrocatalytic properties for the hydrogen evolution reaction(HER)and oxygen evolution reaction(OER)with the corresponding overpotentials of 93 and 316 mV at 10 mA cm^(-2) in an alkaline solution;these values surpass the overpotentials of most previously reported MoS_(2)-based materials.Theoretical calculations and results demonstrate that the synergistic effect of the doped P,which forms active centers in the basal plane of MoS_(2),and S vacancy defects caused by P doping intensifies the intrinsic electronic conductivity and electrocatalytic activity of the catalyst.Density functional theory calculations demonstrate that P optimizes the free energy of the MoS_(2)matrix for hydrogen adsorption,thereby considerably increasing the intrinsic activity of the doped catalyst for the HER compared with that observed from pristine MoS_(2).The enhanced catalytic activity of P-doped MoS_(2)for the OER is attributed to the ability of the doped P which facilitates the adsorption of hydroxyl and hydroperoxy intermediates and reduces the reaction energy barrier.This study provides a new environmentally friendly and convenient solid-phase ion exchange method to improve the electrocatalytic capability of two-dimensional transition-metal dichalcogenides in largescale applications.
基金supports from the National Key Research and Development Program of China(No.2020YFB1505703)This work was supported by the National Natural Science Foundation of China(Nos.52172299,22175198,51772319,51772320,and 51972331)+3 种基金Z.G.Z would like to acknowledge the support from the External Cooperation Program of the Chinese Academy of Sciences(No.121E32KYSB20190008)Six Talent Peaks Project of Jiangsu Province(No.XCL-170)S.C would like to acknowledge the support from the Youth Innovation Promotion Association,CAS(No.2018356)the Outstanding Youth Fund of Jiangxi(No.20192BCBL23027).
文摘Photo-induced vacancy defects are employed strategically to imbue semiconductors with enhanced performance characteristics for many important applications such as surface-enhanced Raman scattering(SERS)sensing,photocatalysis,and photovoltaic applications.However,the long-term maintenance and use of photo-induced vacancy defects remain elusive,because of their rapid self-healing upon air exposure.In this study,we demonstrate that photo-induced oxygen vacancy(PIVO)defects can be stabilized by the photoexcitation of metal–organic framework(MOF)materials,which is crucial for SERS analysis.The PIVO defects in MOF materials are stable for at least two weeks in the ambient atmosphere,owing to the combination of steric hindrance and electron delocalization around vacancy defects,which significantly contrasts the short lifetime(within minutes)of PIVO defects in metal-oxide semiconductors.With the formation of stable PIVO defects,a prominent SERS enhancement surpassing that of pristine MOFs is achieved,accompanied with a reduced limit of detection by three orders of magnitude.Moreover,the additional SERS enhancement rendered by PIVO defects can be stably retained and is effective for monitoring various small molecules,such as dopamine and bisphenol A.
基金This study was also supported by the European Commission Interreg V France-Wallonie-Vlaanderen project“DepollutAir.”Yang Ding is grateful for the financial support of the China Scholarship Council(201808310127)This study was financially supported by the National Natural Science Foundation of China(U20A20122)+1 种基金the Program for Changjiang Scholars and Innovative Research Team in University(IRT_15R52)of the Chinese Ministry of Education,the Program of Introducing Talents of Discipline to Universities-Plan 111(Grant No.B20002)the Ministry of Science and Technology and the Ministry of Education of China,and the National Key R&D Program of China(2016YFA0202602).
文摘The introduction of vacancy defects in semiconductors has been proven to be a highly effective approach to improve their photocatalytic activity owing to their advantages of promoting light absorption,facilitating photogenerated carrier separation,optimizing electronic structure,and enabling the production of reactive radicals.Herein,we outline the state-of-the-art vacancy-engineered photocatalysts in various applications and reveal how the vacancies influence photocatalytic performance.Specifically,the types of vacancy defects,the methods for tailoring vacancies,the advanced characteri-zation techniques,the categories of photocatalysts with vacancy defects,and the corresponding photocatalytic behaviors are presented.Meanwhile,the methods of vacancies creation and the related photocatalytic performance are correlated,which can be very useful to guide the readers to quickly obtain in-depth knowledge and to have a good idea about the selection of defect engineering methods.The precise characterization of vacancy defects is highly challenging.This review describes the accurate use of a series of characterization techniques with detailed comments and suggestions.This represents the uniqueness of this comprehensive review.The challenges and development prospects in engineering photocatalysts with vacancy defects for practical applications are discussed to provide a promising research direction in this field.
基金Project supported by the National Natural Science Foundation of China(Grant Nos.61204008,11075176,and 11505211)the National Key Basic Research Special Foundation of China(Grant No.2013CB328705)
文摘Role of vacancy-type（N vacancy（VN） and Ga vacancy（VGa）） defects in magnetism of GaMnN is investigated by first-principle calculation.Theoretical results show that both the VNand VGainfluence the ferromagnetic state of a system.The VNcan induce antiferromagnetic state and the VGaindirectly modify the stability of the ferromagnetic state by depopulating the Mn levels in GaMnN.The transfer of electrons between the vacancy defects and Mn ions results in converting Mn3＋（d4） into Mn2＋（d5）.The introduced VNand the ferromagnetism become stronger and then gradually weaker with Mn concentration increasing,as well as the coexistence of Mn3＋（d4） and Mn2＋（d5） are found in GaMnN films grown by metal–organic chemical vapor deposition.The analysis suggests that a big proportion of Mn3＋changing into Mn2＋will reduce the exchange interaction and magnetic correlation of Mn atoms and lead to the reduction of ferromagnetism of material.
