Lacquer is the main raw material of lacquerware,while UV-irradiation is an important factor leading to its aging.In order to investigate the aging behavior of urushi lacquer film under UV-irradiation,and to propose pa...Lacquer is the main raw material of lacquerware,while UV-irradiation is an important factor leading to its aging.In order to investigate the aging behavior of urushi lacquer film under UV-irradiation,and to propose parameters that can be used to evaluate its aging degree,the micro-UV/Py-GC/MS system has been applied in the present work to enrich and identify volatile products released by urushi film during aging on the one hand,and to investigate micro-amount and conventional urushi films with different aging degrees on the other hand,in addition,representative historical samples have also been investigated.Volatile products released by urushi film demonstrate that during UV-irradiation,polysaccharides wrapping urushiol polymer would be first degraded to generate furans and alcohols,and then urushiol polymer would undergo photo-oxidation and break of molecular chain,mainly generating oxidation products including aldehydes,organic acids,and ketones,as well as a small number of alkyl benzenes and hydrocarbons.Py-GC/MS analysis of micro-amount urushi films with different aging degrees indicates that UVirradiation is more destructive to aliphatic chains in urushiol polymer,but it also can accelerate the polymerization of microamount urushi film.Py-GC/MS analysis of conventional urushi films indicates that with the increase of aging degree,the total chromatographic peak area ratio of hydrocarbons to benzene derivatives gradually increases,the peak area ratio of 3-pentadecenyl-catechol to 3-pentadecyl-catechol gradually decreases,and the peak area ratio of aging products of urushiol to 3-pentadecyl-catechol gradually increases.The above parameters were further used to evaluate the aging degree of two urushicontained samples separately collected from the surface and interior of a carved lacquer panel in the Forbidden City,and evaluation results are in accord with the natural aging law and further verify the reliability of the proposed parameters.Research results of the present work can lay a foundation for the in-depth study of the UV-irradiation aging mechanism of urushi.展开更多
This paper focuses on Byakudan-nuri, one of the traditional decoration techniques of Japanese Urushi (Urushi natural lacquer) crafts. Works produced by Byakudan-nuri express a unique luster color owing to painting gol...This paper focuses on Byakudan-nuri, one of the traditional decoration techniques of Japanese Urushi (Urushi natural lacquer) crafts. Works produced by Byakudan-nuri express a unique luster color owing to painting gold or silver leaves along with highly transparent Urushi. The specific problem of Byakudan-nuri is the exfoliation of Urushi off the metal leaf surface, to solve a lot of repair work which is done nowadays. For Byakudan-nuri, silver leaf is preferred to a gold leaf. This paper tries to clarify the influence of the different kinds of metal leaves on the appearance and peel strength of works of Byakudan-nuri and, moreover, to elucidate the reason why silver leaf has been used more frequently for Byakudan-nuri until now. It was found out that the reason for the more frequent use of silver leaf in Byakudan-nuri is that silver does not seem to affect the appearance and peel strength in works produced by this technique.展开更多
Maki-e is a traditional Japanese decorative technique that uses the natural lacquer Urushi and metal powders. Currently, there exist only two companies that manufacture metal powder for the purpose of Maki-e, and this...Maki-e is a traditional Japanese decorative technique that uses the natural lacquer Urushi and metal powders. Currently, there exist only two companies that manufacture metal powder for the purpose of Maki-e, and this research focuses on comparing the material characteristics of the gold powders with round shape manufactured by them. EDS (energy-dispersive X-ray spectroscopy) analysis, image analysis of particle shape before and after Maki-e processing, and color analysis of samples after Maki-e processing were carried out in this research. The study revealed that current gold powders with round shape had almost the same content ratio regardless of the manufacturing company and the powder diameter. In addition, spherical shape and irregular shape were observed in any gold powders, and the aggregates were observed in powder with increasing the powder diameter, while the shape of the aggregates differed with manufacturing companies. Therefore, it was indicated that the aggregates in the powder made by Asano Co., Ltd. had an influence on the particle diameter and its deviation after Maki-e processing. Moreover, the powder in Urushi resin has an influence on the Maki-e appearance because there is a color difference in polished powder, powder in Urushi resin, and Urushi resin.展开更多
The Maki-e technique with eggshell powder is one of techniques of Japanese traditional Urushi (Japanese lacquer) crafts. However, this technique is relatively new in the history of Maki-e, and there are no prior resea...The Maki-e technique with eggshell powder is one of techniques of Japanese traditional Urushi (Japanese lacquer) crafts. However, this technique is relatively new in the history of Maki-e, and there are no prior researches in terms of materials, structure, and properties. In this research, therefore we have aimed to evaluate the relationship between the eggshell powder sizes, dispersion, and color shade in Maki-e with eggshell powder. The difference between hen’s and quail’s eggshell characteristics and the effect of their powder particle size on appearance of eggshell Maki-e were discussed on the basis of the results of the particle size, circularity, particle number, and RGB value. As a result, it was found that the occupancy of the eggshell powder on the surface depends on not particle number but the particle size, whereas the whiteness of both eggshell powders depends on the particle size.展开更多
Maki-e is a traditional Japanese decorative technique that uses the natural lacquer Urushi and metal powders. In 2014, there exist only two companies that manufacture silver powder for the purpose of Maki-e, and this ...Maki-e is a traditional Japanese decorative technique that uses the natural lacquer Urushi and metal powders. In 2014, there exist only two companies that manufacture silver powder for the purpose of Maki-e, and this study focuses on comparing the powders manufactured by them. Gloss and color of each silver powder were measured after Maki-e decoration was finished, and EDS (energy-dispersive X-ray spectroscopy) was used to determine the differences in their chemical composition. In addition, to verify the effect of polishing, residual gloss after sulfuration and polishing was measured. The study revealed that the shapes of the silver powders (Maru-fun, No. 1) manufactured by the two companies are different and it affects the occupancy rate of Urushi and powder, which in turn affects their gloss and color. Wakou silver has a very strong resistance to sulfuration;however, owing to its Pd content, its chroma is much lower than that of other powders. It was shown that sulfuration on powder surface can be removed by polishing irrespective of the shape and chemical composition ratio of the particles.展开更多
基金supported by the National Natural Science Foundation of China(Grant No.21904024)。
文摘Lacquer is the main raw material of lacquerware,while UV-irradiation is an important factor leading to its aging.In order to investigate the aging behavior of urushi lacquer film under UV-irradiation,and to propose parameters that can be used to evaluate its aging degree,the micro-UV/Py-GC/MS system has been applied in the present work to enrich and identify volatile products released by urushi film during aging on the one hand,and to investigate micro-amount and conventional urushi films with different aging degrees on the other hand,in addition,representative historical samples have also been investigated.Volatile products released by urushi film demonstrate that during UV-irradiation,polysaccharides wrapping urushiol polymer would be first degraded to generate furans and alcohols,and then urushiol polymer would undergo photo-oxidation and break of molecular chain,mainly generating oxidation products including aldehydes,organic acids,and ketones,as well as a small number of alkyl benzenes and hydrocarbons.Py-GC/MS analysis of micro-amount urushi films with different aging degrees indicates that UVirradiation is more destructive to aliphatic chains in urushiol polymer,but it also can accelerate the polymerization of microamount urushi film.Py-GC/MS analysis of conventional urushi films indicates that with the increase of aging degree,the total chromatographic peak area ratio of hydrocarbons to benzene derivatives gradually increases,the peak area ratio of 3-pentadecenyl-catechol to 3-pentadecyl-catechol gradually decreases,and the peak area ratio of aging products of urushiol to 3-pentadecyl-catechol gradually increases.The above parameters were further used to evaluate the aging degree of two urushicontained samples separately collected from the surface and interior of a carved lacquer panel in the Forbidden City,and evaluation results are in accord with the natural aging law and further verify the reliability of the proposed parameters.Research results of the present work can lay a foundation for the in-depth study of the UV-irradiation aging mechanism of urushi.
文摘This paper focuses on Byakudan-nuri, one of the traditional decoration techniques of Japanese Urushi (Urushi natural lacquer) crafts. Works produced by Byakudan-nuri express a unique luster color owing to painting gold or silver leaves along with highly transparent Urushi. The specific problem of Byakudan-nuri is the exfoliation of Urushi off the metal leaf surface, to solve a lot of repair work which is done nowadays. For Byakudan-nuri, silver leaf is preferred to a gold leaf. This paper tries to clarify the influence of the different kinds of metal leaves on the appearance and peel strength of works of Byakudan-nuri and, moreover, to elucidate the reason why silver leaf has been used more frequently for Byakudan-nuri until now. It was found out that the reason for the more frequent use of silver leaf in Byakudan-nuri is that silver does not seem to affect the appearance and peel strength in works produced by this technique.
文摘Maki-e is a traditional Japanese decorative technique that uses the natural lacquer Urushi and metal powders. Currently, there exist only two companies that manufacture metal powder for the purpose of Maki-e, and this research focuses on comparing the material characteristics of the gold powders with round shape manufactured by them. EDS (energy-dispersive X-ray spectroscopy) analysis, image analysis of particle shape before and after Maki-e processing, and color analysis of samples after Maki-e processing were carried out in this research. The study revealed that current gold powders with round shape had almost the same content ratio regardless of the manufacturing company and the powder diameter. In addition, spherical shape and irregular shape were observed in any gold powders, and the aggregates were observed in powder with increasing the powder diameter, while the shape of the aggregates differed with manufacturing companies. Therefore, it was indicated that the aggregates in the powder made by Asano Co., Ltd. had an influence on the particle diameter and its deviation after Maki-e processing. Moreover, the powder in Urushi resin has an influence on the Maki-e appearance because there is a color difference in polished powder, powder in Urushi resin, and Urushi resin.
文摘The Maki-e technique with eggshell powder is one of techniques of Japanese traditional Urushi (Japanese lacquer) crafts. However, this technique is relatively new in the history of Maki-e, and there are no prior researches in terms of materials, structure, and properties. In this research, therefore we have aimed to evaluate the relationship between the eggshell powder sizes, dispersion, and color shade in Maki-e with eggshell powder. The difference between hen’s and quail’s eggshell characteristics and the effect of their powder particle size on appearance of eggshell Maki-e were discussed on the basis of the results of the particle size, circularity, particle number, and RGB value. As a result, it was found that the occupancy of the eggshell powder on the surface depends on not particle number but the particle size, whereas the whiteness of both eggshell powders depends on the particle size.
文摘Maki-e is a traditional Japanese decorative technique that uses the natural lacquer Urushi and metal powders. In 2014, there exist only two companies that manufacture silver powder for the purpose of Maki-e, and this study focuses on comparing the powders manufactured by them. Gloss and color of each silver powder were measured after Maki-e decoration was finished, and EDS (energy-dispersive X-ray spectroscopy) was used to determine the differences in their chemical composition. In addition, to verify the effect of polishing, residual gloss after sulfuration and polishing was measured. The study revealed that the shapes of the silver powders (Maru-fun, No. 1) manufactured by the two companies are different and it affects the occupancy rate of Urushi and powder, which in turn affects their gloss and color. Wakou silver has a very strong resistance to sulfuration;however, owing to its Pd content, its chroma is much lower than that of other powders. It was shown that sulfuration on powder surface can be removed by polishing irrespective of the shape and chemical composition ratio of the particles.
