Transferring patients with critical illnesses from general wards to intensive care units (ICUs) is a crucial and time-sensitive process. This article presents strategies for improving the efficiency of patient transfe...Transferring patients with critical illnesses from general wards to intensive care units (ICUs) is a crucial and time-sensitive process. This article presents strategies for improving the efficiency of patient transfers, particularly in hospitals where intensive care units are located in buildings separate from general wards. Patient transfers comprise several steps: physicians issue orders, relatives are notified, equipment is prepared, and medical staff coordinate. We identified three factors that influence transfer time: preparation time for bed transfer, time required for shift handovers, and time required for between-ward patient movement. Unfamiliarity with transfer routes and long elevator wait times were factors that also influenced transfer time. The following strategies were proposed: develop a standardized material checklist, design key notes for patient transfers, and optimize transfer routes. These strategies reduced transfer times by 40% to 43%. This study demonstrates that by addressing logistical challenges and streamlining relevant procedures, hospitals can enhance safety and quality of care during patient transfers.展开更多
General purpose graphic processing unit （GPU） calculation technology is gradually widely used in various fields. Its mode of single instruction, multiple threads is capable of seismic numerical simulation which has ...General purpose graphic processing unit （GPU） calculation technology is gradually widely used in various fields. Its mode of single instruction, multiple threads is capable of seismic numerical simulation which has a huge quantity of data and calculation steps. In this study, we introduce a GPU-based parallel calculation method of a precise integration method （PIM） for seismic forward modeling. Compared with CPU single-core calculation, GPU parallel calculating perfectly keeps the features of PIM, which has small bandwidth, high accuracy and capability of modeling complex substructures, and GPU calculation brings high computational efficiency, which means that high-performing GPU parallel calculation can make seismic forward modeling closer to real seismic records.展开更多
Organic reefs, the targets of deep-water petro- leum exploration, developed widely in Xisha area. However, there are concealed igneous rocks undersea, to which organic rocks have nearly equal wave impedance. So the ig...Organic reefs, the targets of deep-water petro- leum exploration, developed widely in Xisha area. However, there are concealed igneous rocks undersea, to which organic rocks have nearly equal wave impedance. So the igneous rocks have become interference for future explo- ration by having similar seismic reflection characteristics. Yet, the density and magnetism of organic reefs are very different from igneous rocks. It has obvious advantages to identify organic reefs and igneous rocks by gravity and magnetic data. At first, frequency decomposition was applied to the free-air gravity anomaly in Xisha area to obtain the 2D subdivision of the gravity anomaly and magnetic anomaly in the vertical direction. Thus, the dis- tribution of igneous rocks in the horizontal direction can be acquired according to high-frequency field, low-frequency field, and its physical properties. Then, 3D forward model- ing of gravitational field was carried out to establish the density model of this area by reference to physical properties of rocks based on former researches. Furthermore, 3D inversion of gravity anomaly by genetic algorithm method of the graphic processing unit （GPU） parallel processing in Xisha target area was applied, and 3D density structure of this area was obtained. By this way, we can confine the igneous rocks to the certain depth according to the density of the igneous rocks. The frequency decomposition and 3D inversion of gravity anomaly by genetic algorithm method of the GPU parallel processing proved to be a useful method for recognizing igneous rocks to its 3D geological position. So organic reefs and igneous rocks can be identified, which provide a prescient information for further exploration.展开更多
The signal processing speed of spectral domain optical coherence tomography(SD-OCT)has become a bottleneck in a lot of medical applications.Recently,a time-domain interpolation method was proposed.This method can get ...The signal processing speed of spectral domain optical coherence tomography(SD-OCT)has become a bottleneck in a lot of medical applications.Recently,a time-domain interpolation method was proposed.This method can get better signal-to-noise ratio(SNR)but much-reduced signal processing time in SD-OCT data processing as compared with the commonly used zeropadding interpolation method.Additionally,the resampled data can be obtained by a few data and coefficients in the cutoff window.Thus,a lot of interpolations can be performed simultaneously.So,this interpolation method is suitable for parallel computing.By using graphics processing unit(GPU)and the compute unified device architecture(CUDA)program model,time-domain interpolation can be accelerated significantly.The computing capability can be achieved more than 250,000 A-lines,200,000 A-lines,and 160,000 A-lines in a second for 2,048 pixel OCT when the cutoff length is L=11,L=21,and L=31,respectively.A frame SD-OCT data(400A-lines×2,048 pixel per line)is acquired and processed on GPU in real time.The results show that signal processing time of SD-OCT can befinished in 6.223 ms when the cutoff length L=21,which is much faster than that on central processing unit(CPU).Real-time signal processing of acquired data can be realized.展开更多
Solute transport simulations are important in water pollution events.This paper introduces a finite volume Godunovtype model for solving a 4×4 matrix form of the hyperbolic conservation laws consisting of 2D shal...Solute transport simulations are important in water pollution events.This paper introduces a finite volume Godunovtype model for solving a 4×4 matrix form of the hyperbolic conservation laws consisting of 2D shallow water equations and transport equations.The model adopts the Harten-Lax-van Leer-contact(HLLC)-approximate Riemann solution to calculate the cell interface fluxes.It can deal well with the changes in the dry and wet interfaces in an actual complex terrain,and it has a strong shock-wave capturing ability.Using monotonic upstream-centred scheme for conservation laws(MUSCL)linear reconstruction with finite slope and the Runge-Kutta time integration method can achieve second-order accuracy.At the same time,the introduction of graphics processing unit(GPU)-accelerated computing technology greatly increases the computing speed.The model is validated against multiple benchmarks,and the results are in good agreement with analytical solutions and other published numerical predictions.The third test case uses the GPU and central processing unit(CPU)calculation models which take 3.865 s and 13.865 s,respectively,indicating that the GPU calculation model can increase the calculation speed by 3.6 times.In the fourth test case,comparing the numerical model calculated by GPU with the traditional numerical model calculated by CPU,the calculation efficiencies of the numerical model calculated by GPU under different resolution grids are 9.8–44.6 times higher than those by CPU.Therefore,it has better potential than previous models for large-scale simulation of solute transport in water pollution incidents.It can provide a reliable theoretical basis and strong data support in the rapid assessment and early warning of water pollution accidents.展开更多
The photonic neural processing unit(PNPU)demonstrates ultrahigh inference speed with low energy consumption,and it has become a promising hardware artificial intelligence(AI)accelerator.However,the nonidealities of th...The photonic neural processing unit(PNPU)demonstrates ultrahigh inference speed with low energy consumption,and it has become a promising hardware artificial intelligence(AI)accelerator.However,the nonidealities of the photonic device and the peripheral circuit make the practical application much more complex.Rather than optimizing the photonic device,the architecture,and the algorithm individually,a joint device-architecture-algorithm codesign method is proposed to improve the accuracy,efficiency and robustness of the PNPU.First,a full-flow simulator for the PNPU is developed from the back end simulator to the high-level training framework;Second,the full system architecture and the complete photonic chip design enable the simulator to closely model the real system;Third,the nonidealities of the photonic chip are evaluated for the PNPU design.The average test accuracy exceeds 98%,and the computing power exceeds 100TOPS.展开更多
On-line transient stability analysis of a power grid is crucial in determining whether the power grid will traverse to a steady state stable operating point after a disturbance. The transient stability analysis involv...On-line transient stability analysis of a power grid is crucial in determining whether the power grid will traverse to a steady state stable operating point after a disturbance. The transient stability analysis involves computing the solutions of the algebraic equations modeling the grid network and the ordinary differential equations modeling the dynamics of the electrical components like synchronous generators, exciters, governors, etc., of the grid in near real-time. In this research, we investigate the use of time-parallel approach in particular the Parareal algorithm implementation on Graphical Processing Unit using Compute Unified Device Architecture to compute solutions of ordinary differential equations. The numerical solution accuracy and computation time of the Parareal algorithm executing on the GPU are demonstrated on the single machine infinite bus test system. Two types of dynamic model of the single synchronous generator namely the classical and detailed models are studied. The numerical solutions of the ordinary differential equations computed by the Parareal algorithm are compared to that computed using the modified Euler’s method demonstrating the accuracy of the Parareal algorithm executing on GPU. Simulations are performed with varying numerical integration time steps, and the suitability of Parareal algorithm in computing near real-time solutions of ordinary different equations is presented. A speedup of 25× and 31× is achieved with the Parareal algorithm for classical and detailed dynamic models of the synchronous generator respectively compared to the sequential modified Euler’s method. The weak scaling efficiency of the Parareal algorithm when required to solve a large number of ordinary differential equations at each time step due to the increase in sequential computations and associated memory transfer latency between the CPU and GPU is discussed.展开更多
Fluid-structure interaction （FSI） problems in microchannels play a prominent role in many engineering applications. The present study is an effort toward the simulation of flow in microchannel considering FSI. The b...Fluid-structure interaction （FSI） problems in microchannels play a prominent role in many engineering applications. The present study is an effort toward the simulation of flow in microchannel considering FSI. The bottom boundary of the microchannel is simulated by size-dependent beam elements for the finite element method （FEM） based on a modified cou- ple stress theory. The lattice Boltzmann method （LBM） using the D2Q13 LB model is coupled to the FEM in order to solve the fluid part of the FSI problem. Because of the fact that the LBM generally needs only nearest neighbor information, the algorithm is an ideal candidate for parallel computing. The simulations are carried out on graphics processing units （GPUs） using computed unified device architecture （CUDA）. In the present study, the governing equations are non-dimensionalized and the set of dimensionless groups is exhibited to show their effects on micro-beam displacement. The numerical results show that the displacements of the micro-beam predicted by the size-dependent beam element are smaller than those by the classical beam element.展开更多
The simulation is an important means of performance evaluation of the computer architecture. Nowadays, the serial simulation of general purpose graphics processing unit(GPGPU) architecture is the main bottleneck for t...The simulation is an important means of performance evaluation of the computer architecture. Nowadays, the serial simulation of general purpose graphics processing unit(GPGPU) architecture is the main bottleneck for the simulation speed. To address this issue, we propose the intra-kernel parallelization on a multicore processor and the inter-kernel parallelization on a multiple-machine platform. We apply these two methods to the GPGPU-sim simulator. The intra-kernel parallelization method firstly parallelizes the serial simulation of multiple compute units in one cycle. Then it parallelizes the timing and functional simulation to reduce the performance loss caused by the synchronization between different compute units. The inter-kernel parallelization method divides multiple kernels of a CUDA program into several groups and distributes these groups across multiple simulation hosts to perform the simulation. Experimental results show that the intra-kernel parallelization method achieves a speed-up of up to 12 with a maximum error rate of 0.009 4% on a 32-core machine, and the inter-kernel parallelization method can accelerate the simulation by a factor of up to 3.9 with a maximum error rate of 0.11% on four simulation hosts. The orthogonality between these two methods allows us to combine them together on multiple multi-core hosts to get further performance improvements.展开更多
Application-specific data processing units (DPUs) are commonly adopted for operational control and data processing in space missions. To overcome the limitations of traditional radiation-hardened or fully commercial d...Application-specific data processing units (DPUs) are commonly adopted for operational control and data processing in space missions. To overcome the limitations of traditional radiation-hardened or fully commercial design approaches, a reconfigurable-system-on-chip (RSoC) solution based on state-of-the-art FPGA is introduced. The flexibility and reliability of this approach are outlined, and the requirements for an enhanced RSoC design with in-flight reconfigurability for space applications are presented. This design has been demonstrated as an on-board computer prototype, providing an in-flight reconfigurable DPU design approach using integrated hardwired processors.展开更多
Personal desktop platform with teraflops peak performance of thousands of cores is realized at the price of conventional workstations using the programmable graphics processing units(GPUs).A GPU-based parallel Euler/N...Personal desktop platform with teraflops peak performance of thousands of cores is realized at the price of conventional workstations using the programmable graphics processing units(GPUs).A GPU-based parallel Euler/Navier-Stokes solver is developed for 2-D compressible flows by using NVIDIA′s Compute Unified Device Architecture(CUDA)programming model in CUDA Fortran programming language.The techniques of implementation of CUDA kernels,double-layered thread hierarchy and variety memory hierarchy are presented to form the GPU-based algorithm of Euler/Navier-Stokes equations.The resulting parallel solver is validated by a set of typical test flow cases.The numerical results show that dozens of times speedup relative to a serial CPU implementation can be achieved using a single GPU desktop platform,which demonstrates that a GPU desktop can serve as a costeffective parallel computing platform to accelerate computational fluid dynamics(CFD)simulations substantially.展开更多
A graphic processing unit (GPU)-accelerated biological species recognition method using partially connected neural evolutionary network model is introduced in this paper. The partial connected neural evolutionary netw...A graphic processing unit (GPU)-accelerated biological species recognition method using partially connected neural evolutionary network model is introduced in this paper. The partial connected neural evolutionary network adopted in the paper can overcome the disadvantage of traditional neural network with small inputs. The whole image is considered as the input of the neural network, so the maximal features can be kept for recognition. To speed up the recognition process of the neural network, a fast implementation of the partially connected neural network was conducted on NVIDIA Tesla C1060 using the NVIDIA compute unified device architecture (CUDA) framework. Image sets of eight biological species were obtained to test the GPU implementation and counterpart serial CPU implementation, and experiment results showed GPU implementation works effectively on both recognition rate and speed, and gained 343 speedup over its counterpart CPU implementation. Comparing to feature-based recognition method on the same recognition task, the method also achieved an acceptable correct rate of 84.6% when testing on eight biological species.展开更多
Compared with the conventional X-ray absorption imaging, the X-ray phase-contrast imaging shows higher contrast on samples with low attenuation coefficient like blood vessels and soft tissues. Among the modalities of ...Compared with the conventional X-ray absorption imaging, the X-ray phase-contrast imaging shows higher contrast on samples with low attenuation coefficient like blood vessels and soft tissues. Among the modalities of phase-contrast imaging, the grating-based phase contrast imaging has been widely accepted owing to the advantage of wide range of sample selections and exemption of coherent source. However, the downside is the substantially larger amount of data generated from the phase-stepping method which slows down the reconstruction process. Graphic processing unit(GPU) has the advantage of allowing parallel computing which is very useful for large quantity data processing. In this paper, a compute unified device architecture(CUDA) C program based on GPU is introduced to accelerate the phase retrieval and filtered back projection(FBP) algorithm for grating-based tomography. Depending on the size of the data, the CUDA C program shows different amount of speed-up over the standard C program on the same Visual Studio 2010 platform. Meanwhile, the speed-up ratio increases as the size of data increases.展开更多
In this study,insights into the effect of interfacial anisotropy on a complex hexagonal close-packed(hcp) dendritic growth during alloy solidification were gained by graphics processing unit(GPU)-accelerated three-dim...In this study,insights into the effect of interfacial anisotropy on a complex hexagonal close-packed(hcp) dendritic growth during alloy solidification were gained by graphics processing unit(GPU)-accelerated three-dimensional(3D) phase-field simulations,as demonstrated for a Mg-Gd alloy.An anisotropic phasefield model with finite interface dissipation was developed by incorporating the contribution of the anisotropy of interfacial energy into the total free energy functional.The modified spherical harmonic anisotropy function was then chosen for the hcp crystal.The GPU parallel computing algorithm was implemented in the present phase-field model,and a corresponding code was developed in the compute unified device architecture parallel computing platform.Benchmark tests indicated that the calculation efficiency of a single TESLA V100 GPU could be~80times that of open multi-processing(OpenMP) with eight central processing unit cores.By coupling the phase-field model with reliable thermodynamic and interfacial energy descriptions,the 3D phase-field simulation of α-Mg dendritic growth in the Mg-6Gd(in wt%) alloy during solidification was performed.Various two-dimensional dendrite morphologies were revealed by cutting the simulated 3D dendrite along different crystallographic planes.Typical sixfold equiaxed and butterflied microstructures observed in experiments were well reproduced.展开更多
Mutual information （MI）-based image registration is effective in registering medical images, but it is computationally expensive. This paper accelerates MI-based image registration by dividing computation of mutual ...Mutual information （MI）-based image registration is effective in registering medical images, but it is computationally expensive. This paper accelerates MI-based image registration by dividing computation of mutual information into spatial transformation and histogram-based calculation, and performing 3D spatial transformation and trilinear interpolation on graphic processing unit （GPU）. The 3D floating image is downloaded to GPU as flat 3D texture, and then fetched and interpolated for each new voxel location in fragment shader. The transformed resuits are rendered to textures by using frame buffer object （FBO） extension, and then read to the main memory used for the remaining computation on CPU. Experimental results show that GPU-accelerated method can achieve speedup about an order of magnitude with better registration result compared with the software implementation on a single-core CPU.展开更多
A multi-GPU system designed for high-speed,real-time signal processing of optical coherencetomography(OCT)is described herein.For the OCT data sampled in linear wave numbers,themaximum procesing rates reached 2.95 MHz...A multi-GPU system designed for high-speed,real-time signal processing of optical coherencetomography(OCT)is described herein.For the OCT data sampled in linear wave numbers,themaximum procesing rates reached 2.95 MHz for 1024-OCT and 1.96 MHz for 2048-OCT.Data sampled using linear wavelengths were re-sampled using a time-domain interpolation method and zero-padding interpolation method to improve image quality.The maximum processing rates for1024-OCT reached 2.16 MHz for the time-domain method and 1.26 MHz for the zero-paddingmethod.The maximum processing rates for 2048-0CT reached_1.58 MHz,and 0.68 MHz,respectively.This method is capable of high-speed,real-time processing for O CT systems.展开更多
Graphics processing units(GPUs)employ the single instruction multiple data(SIMD)hardware to run threads in parallel and allow each thread to maintain an arbitrary control flow.Threads running concurrently within a war...Graphics processing units(GPUs)employ the single instruction multiple data(SIMD)hardware to run threads in parallel and allow each thread to maintain an arbitrary control flow.Threads running concurrently within a warp may jump to different paths after conditional branches.Such divergent control flow makes some lanes idle and hence reduces the SIMD utilization of GPUs.To alleviate the waste of SIMD lanes,threads from multiple warps can be collected together to improve the SIMD lane utilization by compacting threads into idle lanes.However,this mechanism induces extra barrier synchronizations since warps have to be stalled to wait for other warps for compactions,resulting in that no warps are scheduled in some cases.In this paper,we propose an approach to reduce the overhead of barrier synchronizat ions induced by compactions,In our approach,a compaction is bypassed by warps whose threads all jump to the same path after branches.Moreover,warps waiting for a compaction can also bypass this compaction when no warps are ready for issuing.In addition,a compaction is canceled if idle lanes can not be reduced via this compaction.The experimental results demonstrate that our approach provides an average improvement of 21%over the baseline GPU for applications with massive divergent branches,while recovering the performance loss induced by compactions by 13%on average for applications with many non-divergent control flows.展开更多
Porous materials present significant advantages for absorbing radioactive isotopes in nuclear waste streams.To improve absorption efficiency in nuclear waste treatment,a thorough understanding of the diffusion-advecti...Porous materials present significant advantages for absorbing radioactive isotopes in nuclear waste streams.To improve absorption efficiency in nuclear waste treatment,a thorough understanding of the diffusion-advection process within porous structures is essential for material design.In this study,we present advancements in the volumetric lattice Boltzmann method(VLBM)for modeling and simulating pore-scale diffusion-advection of radioactive isotopes within geopolymer porous structures.These structures are created using the phase field method(PFM)to precisely control pore architectures.In our VLBM approach,we introduce a concentration field of an isotope seamlessly coupled with the velocity field and solve it by the time evolution of its particle population function.To address the computational intensity inherent in the coupled lattice Boltzmann equations for velocity and concentration fields,we implement graphics processing unit(GPU)parallelization.Validation of the developed model involves examining the flow and diffusion fields in porous structures.Remarkably,good agreement is observed for both the velocity field from VLBM and multiphysics object-oriented simulation environment(MOOSE),and the concentration field from VLBM and the finite difference method(FDM).Furthermore,we investigate the effects of background flow,species diffusivity,and porosity on the diffusion-advection behavior by varying the background flow velocity,diffusion coefficient,and pore volume fraction,respectively.Notably,all three parameters exert an influence on the diffusion-advection process.Increased background flow and diffusivity markedly accelerate the process due to increased advection intensity and enhanced diffusion capability,respectively.Conversely,increasing the porosity has a less significant effect,causing a slight slowdown of the diffusion-advection process due to the expanded pore volume.This comprehensive parametric study provides valuable insights into the kinetics of isotope uptake in porous structures,facilitating the development of porous materials for nuclear waste treatment applications.展开更多
Large eddy simulation （LES） using the Smagorinsky eddy viscosity model is added to the two-dimensional nine velocity components （D2Q9） lattice Boltzmann equation （LBE） with multi-relaxation-time （MRT） to simul...Large eddy simulation （LES） using the Smagorinsky eddy viscosity model is added to the two-dimensional nine velocity components （D2Q9） lattice Boltzmann equation （LBE） with multi-relaxation-time （MRT） to simulate incompressible turbulent cavity flows with the Reynolds numbers up to 1 × 10^7. To improve the computation efficiency of LBM on the numerical simulations of turbulent flows, the massively parallel computing power from a graphic processing unit （GPU） with a computing unified device architecture （CUDA） is introduced into the MRT-LBE-LES model. The model performs well, compared with the results from others, with an increase of 76 times in computation efficiency. It appears that the higher the Reynolds numbers is, the smaller the Smagorinsky constant should be, if the lattice number is fixed. Also, for a selected high Reynolds number and a selected proper Smagorinsky constant, there is a minimum requirement for the lattice number so that the Smagorinsky eddy viscosity will not be excessively large.展开更多
In recent years, the widespread adoption of parallel computing, especially in multi-core processors and high-performance computing environments, ushered in a new era of efficiency and speed. This trend was particularl...In recent years, the widespread adoption of parallel computing, especially in multi-core processors and high-performance computing environments, ushered in a new era of efficiency and speed. This trend was particularly noteworthy in the field of image processing, which witnessed significant advancements. This parallel computing project explored the field of parallel image processing, with a focus on the grayscale conversion of colorful images. Our approach involved integrating OpenMP into our framework for parallelization to execute a critical image processing task: grayscale conversion. By using OpenMP, we strategically enhanced the overall performance of the conversion process by distributing the workload across multiple threads. The primary objectives of our project revolved around optimizing computation time and improving overall efficiency, particularly in the task of grayscale conversion of colorful images. Utilizing OpenMP for concurrent processing across multiple cores significantly reduced execution times through the effective distribution of tasks among these cores. The speedup values for various image sizes highlighted the efficacy of parallel processing, especially for large images. However, a detailed examination revealed a potential decline in parallelization efficiency with an increasing number of cores. This underscored the importance of a carefully optimized parallelization strategy, considering factors like load balancing and minimizing communication overhead. Despite challenges, the overall scalability and efficiency achieved with parallel image processing underscored OpenMP’s effectiveness in accelerating image manipulation tasks.展开更多
文摘Transferring patients with critical illnesses from general wards to intensive care units (ICUs) is a crucial and time-sensitive process. This article presents strategies for improving the efficiency of patient transfers, particularly in hospitals where intensive care units are located in buildings separate from general wards. Patient transfers comprise several steps: physicians issue orders, relatives are notified, equipment is prepared, and medical staff coordinate. We identified three factors that influence transfer time: preparation time for bed transfer, time required for shift handovers, and time required for between-ward patient movement. Unfamiliarity with transfer routes and long elevator wait times were factors that also influenced transfer time. The following strategies were proposed: develop a standardized material checklist, design key notes for patient transfers, and optimize transfer routes. These strategies reduced transfer times by 40% to 43%. This study demonstrates that by addressing logistical challenges and streamlining relevant procedures, hospitals can enhance safety and quality of care during patient transfers.
基金supported by the National Natural Science Foundation of China (Nos 40974066 and 40821062)National Basic Research Program of China (No 2007CB209602)
文摘General purpose graphic processing unit （GPU） calculation technology is gradually widely used in various fields. Its mode of single instruction, multiple threads is capable of seismic numerical simulation which has a huge quantity of data and calculation steps. In this study, we introduce a GPU-based parallel calculation method of a precise integration method （PIM） for seismic forward modeling. Compared with CPU single-core calculation, GPU parallel calculating perfectly keeps the features of PIM, which has small bandwidth, high accuracy and capability of modeling complex substructures, and GPU calculation brings high computational efficiency, which means that high-performing GPU parallel calculation can make seismic forward modeling closer to real seismic records.
基金financially supported by the National Natural Science Foundation of China (No.41174085)
文摘Organic reefs, the targets of deep-water petro- leum exploration, developed widely in Xisha area. However, there are concealed igneous rocks undersea, to which organic rocks have nearly equal wave impedance. So the igneous rocks have become interference for future explo- ration by having similar seismic reflection characteristics. Yet, the density and magnetism of organic reefs are very different from igneous rocks. It has obvious advantages to identify organic reefs and igneous rocks by gravity and magnetic data. At first, frequency decomposition was applied to the free-air gravity anomaly in Xisha area to obtain the 2D subdivision of the gravity anomaly and magnetic anomaly in the vertical direction. Thus, the dis- tribution of igneous rocks in the horizontal direction can be acquired according to high-frequency field, low-frequency field, and its physical properties. Then, 3D forward model- ing of gravitational field was carried out to establish the density model of this area by reference to physical properties of rocks based on former researches. Furthermore, 3D inversion of gravity anomaly by genetic algorithm method of the graphic processing unit （GPU） parallel processing in Xisha target area was applied, and 3D density structure of this area was obtained. By this way, we can confine the igneous rocks to the certain depth according to the density of the igneous rocks. The frequency decomposition and 3D inversion of gravity anomaly by genetic algorithm method of the GPU parallel processing proved to be a useful method for recognizing igneous rocks to its 3D geological position. So organic reefs and igneous rocks can be identified, which provide a prescient information for further exploration.
基金supported by National High Technology R&D project of China(2008AA02Z422)The Instrument Developing Project of The Chinese Academy of Sciences,Institute of Optics and Electronic,Chinese Academy of Sciences.
文摘The signal processing speed of spectral domain optical coherence tomography(SD-OCT)has become a bottleneck in a lot of medical applications.Recently,a time-domain interpolation method was proposed.This method can get better signal-to-noise ratio(SNR)but much-reduced signal processing time in SD-OCT data processing as compared with the commonly used zeropadding interpolation method.Additionally,the resampled data can be obtained by a few data and coefficients in the cutoff window.Thus,a lot of interpolations can be performed simultaneously.So,this interpolation method is suitable for parallel computing.By using graphics processing unit(GPU)and the compute unified device architecture(CUDA)program model,time-domain interpolation can be accelerated significantly.The computing capability can be achieved more than 250,000 A-lines,200,000 A-lines,and 160,000 A-lines in a second for 2,048 pixel OCT when the cutoff length is L=11,L=21,and L=31,respectively.A frame SD-OCT data(400A-lines×2,048 pixel per line)is acquired and processed on GPU in real time.The results show that signal processing time of SD-OCT can befinished in 6.223 ms when the cutoff length L=21,which is much faster than that on central processing unit(CPU).Real-time signal processing of acquired data can be realized.
基金Project supported by the National Natural Science Foundation of China(Nos.52009104 and 52079106)the Shaanxi Provincial Department of Water Resources Project(No.2017slkj-14)the Shaanxi Provincial Department of Science and Technology Project(No.2017JQ3043),China。
文摘Solute transport simulations are important in water pollution events.This paper introduces a finite volume Godunovtype model for solving a 4×4 matrix form of the hyperbolic conservation laws consisting of 2D shallow water equations and transport equations.The model adopts the Harten-Lax-van Leer-contact(HLLC)-approximate Riemann solution to calculate the cell interface fluxes.It can deal well with the changes in the dry and wet interfaces in an actual complex terrain,and it has a strong shock-wave capturing ability.Using monotonic upstream-centred scheme for conservation laws(MUSCL)linear reconstruction with finite slope and the Runge-Kutta time integration method can achieve second-order accuracy.At the same time,the introduction of graphics processing unit(GPU)-accelerated computing technology greatly increases the computing speed.The model is validated against multiple benchmarks,and the results are in good agreement with analytical solutions and other published numerical predictions.The third test case uses the GPU and central processing unit(CPU)calculation models which take 3.865 s and 13.865 s,respectively,indicating that the GPU calculation model can increase the calculation speed by 3.6 times.In the fourth test case,comparing the numerical model calculated by GPU with the traditional numerical model calculated by CPU,the calculation efficiencies of the numerical model calculated by GPU under different resolution grids are 9.8–44.6 times higher than those by CPU.Therefore,it has better potential than previous models for large-scale simulation of solute transport in water pollution incidents.It can provide a reliable theoretical basis and strong data support in the rapid assessment and early warning of water pollution accidents.
基金supported by the National Natural Science Foundation of China(Grant No.61827817)。
文摘The photonic neural processing unit(PNPU)demonstrates ultrahigh inference speed with low energy consumption,and it has become a promising hardware artificial intelligence(AI)accelerator.However,the nonidealities of the photonic device and the peripheral circuit make the practical application much more complex.Rather than optimizing the photonic device,the architecture,and the algorithm individually,a joint device-architecture-algorithm codesign method is proposed to improve the accuracy,efficiency and robustness of the PNPU.First,a full-flow simulator for the PNPU is developed from the back end simulator to the high-level training framework;Second,the full system architecture and the complete photonic chip design enable the simulator to closely model the real system;Third,the nonidealities of the photonic chip are evaluated for the PNPU design.The average test accuracy exceeds 98%,and the computing power exceeds 100TOPS.
文摘On-line transient stability analysis of a power grid is crucial in determining whether the power grid will traverse to a steady state stable operating point after a disturbance. The transient stability analysis involves computing the solutions of the algebraic equations modeling the grid network and the ordinary differential equations modeling the dynamics of the electrical components like synchronous generators, exciters, governors, etc., of the grid in near real-time. In this research, we investigate the use of time-parallel approach in particular the Parareal algorithm implementation on Graphical Processing Unit using Compute Unified Device Architecture to compute solutions of ordinary differential equations. The numerical solution accuracy and computation time of the Parareal algorithm executing on the GPU are demonstrated on the single machine infinite bus test system. Two types of dynamic model of the single synchronous generator namely the classical and detailed models are studied. The numerical solutions of the ordinary differential equations computed by the Parareal algorithm are compared to that computed using the modified Euler’s method demonstrating the accuracy of the Parareal algorithm executing on GPU. Simulations are performed with varying numerical integration time steps, and the suitability of Parareal algorithm in computing near real-time solutions of ordinary different equations is presented. A speedup of 25× and 31× is achieved with the Parareal algorithm for classical and detailed dynamic models of the synchronous generator respectively compared to the sequential modified Euler’s method. The weak scaling efficiency of the Parareal algorithm when required to solve a large number of ordinary differential equations at each time step due to the increase in sequential computations and associated memory transfer latency between the CPU and GPU is discussed.
文摘Fluid-structure interaction （FSI） problems in microchannels play a prominent role in many engineering applications. The present study is an effort toward the simulation of flow in microchannel considering FSI. The bottom boundary of the microchannel is simulated by size-dependent beam elements for the finite element method （FEM） based on a modified cou- ple stress theory. The lattice Boltzmann method （LBM） using the D2Q13 LB model is coupled to the FEM in order to solve the fluid part of the FSI problem. Because of the fact that the LBM generally needs only nearest neighbor information, the algorithm is an ideal candidate for parallel computing. The simulations are carried out on graphics processing units （GPUs） using computed unified device architecture （CUDA）. In the present study, the governing equations are non-dimensionalized and the set of dimensionless groups is exhibited to show their effects on micro-beam displacement. The numerical results show that the displacements of the micro-beam predicted by the size-dependent beam element are smaller than those by the classical beam element.
基金the National Natural Science Foundation of China(Nos.61572508,61272144,61303065and 61202121)the National High Technology Research and Development Program(863)of China(No.2012AA010905)+2 种基金the Research Project of National University of Defense Technology(No.JC13-06-02)the Doctoral Fund of Ministry of Education of China(No.20134307120028)the Research Fund for the Doctoral Program of Higher Education of China(No.20114307120013)
文摘The simulation is an important means of performance evaluation of the computer architecture. Nowadays, the serial simulation of general purpose graphics processing unit(GPGPU) architecture is the main bottleneck for the simulation speed. To address this issue, we propose the intra-kernel parallelization on a multicore processor and the inter-kernel parallelization on a multiple-machine platform. We apply these two methods to the GPGPU-sim simulator. The intra-kernel parallelization method firstly parallelizes the serial simulation of multiple compute units in one cycle. Then it parallelizes the timing and functional simulation to reduce the performance loss caused by the synchronization between different compute units. The inter-kernel parallelization method divides multiple kernels of a CUDA program into several groups and distributes these groups across multiple simulation hosts to perform the simulation. Experimental results show that the intra-kernel parallelization method achieves a speed-up of up to 12 with a maximum error rate of 0.009 4% on a 32-core machine, and the inter-kernel parallelization method can accelerate the simulation by a factor of up to 3.9 with a maximum error rate of 0.11% on four simulation hosts. The orthogonality between these two methods allows us to combine them together on multiple multi-core hosts to get further performance improvements.
基金Supported by Innovative Program of the Chinese Academy of Sciences (No. KGCY-SYW-407-02)Grand International Cooperation Foundation of Shanghai Science and Technology Commission (No. 052207046)
文摘Application-specific data processing units (DPUs) are commonly adopted for operational control and data processing in space missions. To overcome the limitations of traditional radiation-hardened or fully commercial design approaches, a reconfigurable-system-on-chip (RSoC) solution based on state-of-the-art FPGA is introduced. The flexibility and reliability of this approach are outlined, and the requirements for an enhanced RSoC design with in-flight reconfigurability for space applications are presented. This design has been demonstrated as an on-board computer prototype, providing an in-flight reconfigurable DPU design approach using integrated hardwired processors.
基金supported by the National Natural Science Foundation of China (No.11172134)the Funding of Jiangsu Innovation Program for Graduate Education (No.CXLX13_132)
文摘Personal desktop platform with teraflops peak performance of thousands of cores is realized at the price of conventional workstations using the programmable graphics processing units(GPUs).A GPU-based parallel Euler/Navier-Stokes solver is developed for 2-D compressible flows by using NVIDIA′s Compute Unified Device Architecture(CUDA)programming model in CUDA Fortran programming language.The techniques of implementation of CUDA kernels,double-layered thread hierarchy and variety memory hierarchy are presented to form the GPU-based algorithm of Euler/Navier-Stokes equations.The resulting parallel solver is validated by a set of typical test flow cases.The numerical results show that dozens of times speedup relative to a serial CPU implementation can be achieved using a single GPU desktop platform,which demonstrates that a GPU desktop can serve as a costeffective parallel computing platform to accelerate computational fluid dynamics(CFD)simulations substantially.
基金National Natural Science Foundation of China (No. 60975084)Natural Science Foundation of Fujian Province,China (No.2011J05159)
文摘A graphic processing unit (GPU)-accelerated biological species recognition method using partially connected neural evolutionary network model is introduced in this paper. The partial connected neural evolutionary network adopted in the paper can overcome the disadvantage of traditional neural network with small inputs. The whole image is considered as the input of the neural network, so the maximal features can be kept for recognition. To speed up the recognition process of the neural network, a fast implementation of the partially connected neural network was conducted on NVIDIA Tesla C1060 using the NVIDIA compute unified device architecture (CUDA) framework. Image sets of eight biological species were obtained to test the GPU implementation and counterpart serial CPU implementation, and experiment results showed GPU implementation works effectively on both recognition rate and speed, and gained 343 speedup over its counterpart CPU implementation. Comparing to feature-based recognition method on the same recognition task, the method also achieved an acceptable correct rate of 84.6% when testing on eight biological species.
基金the National Basic Research Program(973) of China(No.2010CB834300)the Biomedical Engineering Cross-Research Fund of Shanghai Jiao Tong University(Nos.YG2011MS49 and YG2013MS65)
文摘Compared with the conventional X-ray absorption imaging, the X-ray phase-contrast imaging shows higher contrast on samples with low attenuation coefficient like blood vessels and soft tissues. Among the modalities of phase-contrast imaging, the grating-based phase contrast imaging has been widely accepted owing to the advantage of wide range of sample selections and exemption of coherent source. However, the downside is the substantially larger amount of data generated from the phase-stepping method which slows down the reconstruction process. Graphic processing unit(GPU) has the advantage of allowing parallel computing which is very useful for large quantity data processing. In this paper, a compute unified device architecture(CUDA) C program based on GPU is introduced to accelerate the phase retrieval and filtered back projection(FBP) algorithm for grating-based tomography. Depending on the size of the data, the CUDA C program shows different amount of speed-up over the standard C program on the same Visual Studio 2010 platform. Meanwhile, the speed-up ratio increases as the size of data increases.
基金supported by the Natural Science Foundation of Hunan Province for Distinguished Young Scholars (No. 2021JJ10062)National Key Research and Development Program of China (No. 2016YFB0301101)+2 种基金Science and Technology Program of Guangxi province, China (No. AB21220028)the financial support from the Fundamental Research Funds for the Central Universities of Central South University (No. 2019zzts050)Postgraduate Scientific Research Innovation Project of Hunan Province (No. CX20190106)。
文摘In this study,insights into the effect of interfacial anisotropy on a complex hexagonal close-packed(hcp) dendritic growth during alloy solidification were gained by graphics processing unit(GPU)-accelerated three-dimensional(3D) phase-field simulations,as demonstrated for a Mg-Gd alloy.An anisotropic phasefield model with finite interface dissipation was developed by incorporating the contribution of the anisotropy of interfacial energy into the total free energy functional.The modified spherical harmonic anisotropy function was then chosen for the hcp crystal.The GPU parallel computing algorithm was implemented in the present phase-field model,and a corresponding code was developed in the compute unified device architecture parallel computing platform.Benchmark tests indicated that the calculation efficiency of a single TESLA V100 GPU could be~80times that of open multi-processing(OpenMP) with eight central processing unit cores.By coupling the phase-field model with reliable thermodynamic and interfacial energy descriptions,the 3D phase-field simulation of α-Mg dendritic growth in the Mg-6Gd(in wt%) alloy during solidification was performed.Various two-dimensional dendrite morphologies were revealed by cutting the simulated 3D dendrite along different crystallographic planes.Typical sixfold equiaxed and butterflied microstructures observed in experiments were well reproduced.
基金Supported by National High Technology Research and Development Program("863"Program)of China(No.863-306-ZD13-03-06)
文摘Mutual information （MI）-based image registration is effective in registering medical images, but it is computationally expensive. This paper accelerates MI-based image registration by dividing computation of mutual information into spatial transformation and histogram-based calculation, and performing 3D spatial transformation and trilinear interpolation on graphic processing unit （GPU）. The 3D floating image is downloaded to GPU as flat 3D texture, and then fetched and interpolated for each new voxel location in fragment shader. The transformed resuits are rendered to textures by using frame buffer object （FBO） extension, and then read to the main memory used for the remaining computation on CPU. Experimental results show that GPU-accelerated method can achieve speedup about an order of magnitude with better registration result compared with the software implementation on a single-core CPU.
基金the support from the union project of Peking University third hospital&Chinese Academy of Sciences(Grant No.7490-04,Grant No.KJZD-EW-TZ-L03)the Sichuan Youth Science&Technology Foundation(Grant No.13QNJJ0034)+1 种基金the West Light Foundation of the Chinese Academy of Sciences,the National Major Scientific Equipment program(Grant No.2012YQ120080)the National Science Foundation of China(Grant No.6118082).
文摘A multi-GPU system designed for high-speed,real-time signal processing of optical coherencetomography(OCT)is described herein.For the OCT data sampled in linear wave numbers,themaximum procesing rates reached 2.95 MHz for 1024-OCT and 1.96 MHz for 2048-OCT.Data sampled using linear wavelengths were re-sampled using a time-domain interpolation method and zero-padding interpolation method to improve image quality.The maximum processing rates for1024-OCT reached 2.16 MHz for the time-domain method and 1.26 MHz for the zero-paddingmethod.The maximum processing rates for 2048-0CT reached_1.58 MHz,and 0.68 MHz,respectively.This method is capable of high-speed,real-time processing for O CT systems.
基金the National Natural Science Foundation of China(No.61702521)the Natural Science Foundation of Tianjin(No.18JCQNJC00400)+1 种基金the Scientific Research Foundation of Civil Aviation University of China(No.2017QD12S)the Fundamental Research Funds for the Central Universities of Civil Aviation University of China(Nos.3122018C023 and 3122018C021)。
文摘Graphics processing units(GPUs)employ the single instruction multiple data(SIMD)hardware to run threads in parallel and allow each thread to maintain an arbitrary control flow.Threads running concurrently within a warp may jump to different paths after conditional branches.Such divergent control flow makes some lanes idle and hence reduces the SIMD utilization of GPUs.To alleviate the waste of SIMD lanes,threads from multiple warps can be collected together to improve the SIMD lane utilization by compacting threads into idle lanes.However,this mechanism induces extra barrier synchronizations since warps have to be stalled to wait for other warps for compactions,resulting in that no warps are scheduled in some cases.In this paper,we propose an approach to reduce the overhead of barrier synchronizat ions induced by compactions,In our approach,a compaction is bypassed by warps whose threads all jump to the same path after branches.Moreover,warps waiting for a compaction can also bypass this compaction when no warps are ready for issuing.In addition,a compaction is canceled if idle lanes can not be reduced via this compaction.The experimental results demonstrate that our approach provides an average improvement of 21%over the baseline GPU for applications with massive divergent branches,while recovering the performance loss induced by compactions by 13%on average for applications with many non-divergent control flows.
基金supported as part of the Center for Hierarchical Waste Form Materials,an Energy Frontier Research Center funded by the U.S.Department of Energy,Office of Science,Basic Energy Sciences under Award No.DE-SC0016574.
文摘Porous materials present significant advantages for absorbing radioactive isotopes in nuclear waste streams.To improve absorption efficiency in nuclear waste treatment,a thorough understanding of the diffusion-advection process within porous structures is essential for material design.In this study,we present advancements in the volumetric lattice Boltzmann method(VLBM)for modeling and simulating pore-scale diffusion-advection of radioactive isotopes within geopolymer porous structures.These structures are created using the phase field method(PFM)to precisely control pore architectures.In our VLBM approach,we introduce a concentration field of an isotope seamlessly coupled with the velocity field and solve it by the time evolution of its particle population function.To address the computational intensity inherent in the coupled lattice Boltzmann equations for velocity and concentration fields,we implement graphics processing unit(GPU)parallelization.Validation of the developed model involves examining the flow and diffusion fields in porous structures.Remarkably,good agreement is observed for both the velocity field from VLBM and multiphysics object-oriented simulation environment(MOOSE),and the concentration field from VLBM and the finite difference method(FDM).Furthermore,we investigate the effects of background flow,species diffusivity,and porosity on the diffusion-advection behavior by varying the background flow velocity,diffusion coefficient,and pore volume fraction,respectively.Notably,all three parameters exert an influence on the diffusion-advection process.Increased background flow and diffusivity markedly accelerate the process due to increased advection intensity and enhanced diffusion capability,respectively.Conversely,increasing the porosity has a less significant effect,causing a slight slowdown of the diffusion-advection process due to the expanded pore volume.This comprehensive parametric study provides valuable insights into the kinetics of isotope uptake in porous structures,facilitating the development of porous materials for nuclear waste treatment applications.
基金supported by College of William and Mary,Virginia Institute of Marine Science for the study environment
文摘Large eddy simulation （LES） using the Smagorinsky eddy viscosity model is added to the two-dimensional nine velocity components （D2Q9） lattice Boltzmann equation （LBE） with multi-relaxation-time （MRT） to simulate incompressible turbulent cavity flows with the Reynolds numbers up to 1 × 10^7. To improve the computation efficiency of LBM on the numerical simulations of turbulent flows, the massively parallel computing power from a graphic processing unit （GPU） with a computing unified device architecture （CUDA） is introduced into the MRT-LBE-LES model. The model performs well, compared with the results from others, with an increase of 76 times in computation efficiency. It appears that the higher the Reynolds numbers is, the smaller the Smagorinsky constant should be, if the lattice number is fixed. Also, for a selected high Reynolds number and a selected proper Smagorinsky constant, there is a minimum requirement for the lattice number so that the Smagorinsky eddy viscosity will not be excessively large.
文摘In recent years, the widespread adoption of parallel computing, especially in multi-core processors and high-performance computing environments, ushered in a new era of efficiency and speed. This trend was particularly noteworthy in the field of image processing, which witnessed significant advancements. This parallel computing project explored the field of parallel image processing, with a focus on the grayscale conversion of colorful images. Our approach involved integrating OpenMP into our framework for parallelization to execute a critical image processing task: grayscale conversion. By using OpenMP, we strategically enhanced the overall performance of the conversion process by distributing the workload across multiple threads. The primary objectives of our project revolved around optimizing computation time and improving overall efficiency, particularly in the task of grayscale conversion of colorful images. Utilizing OpenMP for concurrent processing across multiple cores significantly reduced execution times through the effective distribution of tasks among these cores. The speedup values for various image sizes highlighted the efficacy of parallel processing, especially for large images. However, a detailed examination revealed a potential decline in parallelization efficiency with an increasing number of cores. This underscored the importance of a carefully optimized parallelization strategy, considering factors like load balancing and minimizing communication overhead. Despite challenges, the overall scalability and efficiency achieved with parallel image processing underscored OpenMP’s effectiveness in accelerating image manipulation tasks.
